cents per bit.
I think this is why the sharpeners only go down to a minimum size, it is
not worth it for a 16 cent bit. Yes they are good quality
Thanks Chris, I got 20 SC somethings I can use at Ralphs link.
Stay warm and well.
Cheers, Gene Heskett.
--
"There are four boxes to be us
On 12/18/22 18:54, andy pugh wrote:
On Sun, 18 Dec 2022 at 17:54, gene heskett wrote:
So, what jig or machine do you all use to sharpen drill bits in the
below 5mm categories?
I freehand them on the diamond wheel of the D-bit grinder.
And then try again if I have made it worse
stay well!
Its been awful quiet here too Leonardo. The last post was on the 28th of
Dec 2022, at 6:03 my time. (American EST)
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gen
n one on 28th December
but no activity after that until your email.
Marcus
Same here Marcus, except I did get one from Sam S. on the 23rd. but
between the 18th and now Leonard's question, that is it. Big hole in
traffic.
Happy and better New Year everybody.
Cheers, Gene Heskett.
--
ription because it's been several days without messages and
seems strange.
Thank you and stay well!
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-use
alifornia
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listin
stinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes
c-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we mu
M from NE so I lost
track of him. Employment brought me to WV 38 years ago, and I'm now 21
years retired, and still here.
And tell us how you did it when it working.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please u
avings.
[snip]
Take care & stay well, Robin.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respe
n
i'm thinking to replace them with multi-turn pots
is this a good idea or a waste of time
https://www.velleman.eu/downloads/2/ps613a502.pdf
The caps exploded? On your bench or sometime in the past?
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ba
On 1/22/23 04:19, fxkl47BF--- via Emc-users wrote:
On Sat, 21 Jan 2023, gene heskett wrote:
On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
i acquired a non-working ps 613u power supply
two 2200uf caps had exploded
i replaced them and it appears to be working
my complaint is the voltage
ss EDM'ing something. Great for
holding tools at add angles to sharpen them with a CBN wheel. Also too
heavy and too tall for my G0704 to carry comfortably. Should have
started with a BS-0.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot,
to have them drop shipped. They'll need an
HDMI monitor, mouse and keyboard each. And 5v5a psu's.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we de
On 1/22/23 18:15, fxkl47BF--- via Emc-users wrote:
On Sun, 22 Jan 2023, gene heskett wrote:
On 1/22/23 04:19, fxkl47BF--- via Emc-users wrote:
On Sat, 21 Jan 2023, gene heskett wrote:
On 1/21/23 20:23, fxkl47BF--- via Emc-users wrote:
i acquired a non-working ps 613u power supply
two
y carving the 2nd start on its way
back to start a new 1st start. The hard maple stick is turning backwards
then. 180 degrees out of phase with the fwd motion.
And Ali-Express is getting plumb reasonable on them right now.
[snip Leonardo's problem, this isn't really part of that thread
th. Today I build
my own or buy used w/o an hd or the windows sticker.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must fi
net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Chris Albertson
Redondo Beach, California
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
__
g up, I'm 88, alone now with a chest full of
new parts but doing well for the years.
Take care and stay well
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we d
nch, and a reversible vfd,
that all could be programmed. Even to ejecting the bars remains and
feeding a new one from a rack of them could be done.
Lots of ways to skin that cat. This is just three ideas.
Take care and stay well, Andrew.
Cheers, Gene Heskett.
--
"There are four boxes to be use
nough machine to be useful.
Take care and stay well, John.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the
breaking off the wire edge. Works on dull
carbide tools too.
Ideally using m98 and m99
But I'm a bit stuck on how to do it.
Does anyone have some tips?
This is for bar pulling in CNC lathe
M400 unclamps chuck and m401 clamps chuck
And I need some way to loop the g code
On Fri, 27 Jan 20
ng list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire resp
ies of it running
nicely. Decently self protected too.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of lib
ers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, j
see the fine manual for how to go
about reflashing it if an spi enabled bitfile is in it.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for th
sers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes t
_
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author
ng
problem, although I will have to import them anyway.
To where these days?
Take care and stay well yourself.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we
ost on where I can start to
track the problem.
El sáb, 4 mar 2023 a las 20:35, Jon Elson ()
escribió:
On 3/4/23 14:08, gene heskett wrote:
Yup, I agree with Gene, if the motor was not spinning AT
ALL, but the VFD or motor was making a whining sound, it may
mean the VFD was only powering one phas
views. An rch
looks like a saw log to them.
Thanks for your help as always!
Leonardo.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes t
l the problem could be the VFD as Gene and Jon pointed out.
I'll let you know how it goes when cutting wood again.
Thanks to all for your help! :)
El dom, 5 mar 2023 a las 18:11, gene heskett ()
escribió:
On 3/5/23 12:59, Leonardo Marsaglia wrote:
By the way, one subtle thing I noticed t
e
crystalized, and eventually breaks due to bending fatigue, but isn't
blown in the classic sense. Looks great, till you check it with an
ohm-meter.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that orde
13:37, Todd Zuercher
escribió:
Have you checked your cabling between the motor and VFD?
And please folks, take a break on the mail server, and trim your posts
down to the context of your reply.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury
t. 2 wire from a std
dvm can lie like a rug. Bad leads, Bad fuse that looks great. BTDT
Leonardo. 4 wire is where the current running thru the cable to measure
it,is coming from a different src, so the meter does not see the meters
leads, only the voltage drop across the wire being teste
e have a brand new team of well
trained horses to move our machinery.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in d
Thaddeous.
Thanks,
Thaddeus Waldner
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury
n Apr 24, 2023, at 5:24 PM, gene heskett wrote:
On 4/24/23 17:41, Thaddeus Waldner wrote:
HI,
I have an application where I need a NEMA 23-size 80-120 watt brushless DC
motor. The machine housing doesn’t have space for a 100w DC 24v power supply,
so I would like to use a controller and mot
.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ba
On 4/25/23 11:32, andy pugh wrote:
On Tue, 25 Apr 2023 at 16:07, gene heskett wrote:
I'm with Todd, confused.
I imagine he is looking for something like the Clearpath integrated
motor/drivers:
https://teknic.com/products/clearpath-brushless-dc-servo-motors/
Unfortunately it seems
st. On 3d
printers, the 42C motors have been all been removed because their prints
are shingled. Optical encoders are fine, hall effects aren't.
[...]
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that
here its at. And, unless some huge, show stopper bug
is found in linuxcnc-2.8.x, linuxcnc will be part of the upcoming stable
release of debian 12, aka bookworm. What's not to like?
Take care & stay well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liber
ink of it as modernizing the design.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectab
their lathe had the wrong thread :-)
Andy, there's one thing I'd never do, is call you the average Rivett owner.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot,
forge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the
users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes
seen as a
variable width tooth.
Has such a long term after machining shrinkage study ever been done and
written up?
Thanks.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Autho
sibilities are there.
tomp
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and a
stinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
__
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Chee
he rush of getting the machine working again.
El lun, 12 jun 2023 a las 17:36, gene heskett ()
escribió:
Wrong atribution Leonardo. It was posted by Andrew Beck, I was just
commenting that it appears Andrew was overdriving the motors a bit.
On 6/12/23 15:58, andrew beck wrote:
Leon I use a
volt motor. All this isn't much use
to you though, just stating what can be done with linuxcnc.
Thanks for the clarification Andrew. Take care & stay well.
[...]
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please
tinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Bran
On 6/25/23 04:43, gene heskett wrote:
On 6/24/23 23:29, John Dammeyer wrote:
I want to add an encoder onto the back of this stepper motor. I can
install
either a US Digital or a CUI since both mounting flanges can extend
out near
the edges of the back mounting plate.
Is there any reason I
the nap
often wins. ;o)> Keeps me out of the bars too dontcha know.
Tace care and stay well all.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respec
(leaving the rotor in place) and
choosing your mounting point carefully would probably be best.
Or, as Gene says, use the existing holes, very short screws, and an
adaptor plate.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.
ver or the nearest star, our sun goes supernova. Outlast
me for sure. The finished ones will get a dab of shoe goo near each
corner and stuck inside the bases of 2 or 3 dead printers here. To mount
much more capable printer controllers.
Take care & stay well, John.
[...]
Cheers, Gene Hesk
that same
alternator/battery/regulator transplanted to each vehicle I bought,
starting in -30F weather was never a problem.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Ge
On 6/30/23 09:26, Igor Chudov wrote:
Sem servos and delta controls.
I can load out or even deliver in chicagoland
Links to a web page and some pix might be appreciated.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Pleas
or message if run manually in MDI mode. Use
origin/master
last commit Mon May 8 16:10:03 2023 +0200
404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar
problem?
Nicklas Karlsson
[...]
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ball
_
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
_
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in d
lower resolution, its shop made, ATS-667's hall
effects watching the teeth of the 60 tooth bull gear on the spindle.
> -Original Message-
From: gene heskett [mailto:ghesk...@shentel.net]
Sent: July 3, 2023 5:49 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] G33.1
if Workspace side has the size issue with importing.
I'll look at it, thank you for the link.
On Tuesday, July 4, 2023 at 03:10:58 AM MDT, gene heskett
wrote:
On 7/4/23 02:01, andrew beck wrote:
I run a CNC machine shop full time.
We always want the step files. Or SOLIDWORKS file
the new 7.x Workspace. It's so different from 2.x through 6.6.
Hmmm, I don't remember if Workspace side has the size issue with importing.
No thanks for the link Greg, every button on that page leads to a porno
dl with no exit buttons in sight. Its been compromised, probably by M$.
__
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene
CELERATION
# If using BACKLASH compensation STEPGEN_MAXACCEL should be 100% larger.
STEPGEN_MAXVEL = 2.75
STEPGEN_MAXACCEL = 20.0
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Hesk
On 7/4/23 18:18, gene heskett wrote:
On 7/4/23 16:49, John Dammeyer wrote:
The problem is under the covers somewhere and the Joint 2 following
error isn't totally accurate but is what happens later.
John
Lets clarify where the error is, because the turn around at the bottom
of the ho
On 7/4/23 20:09, John Dammeyer wrote:
On 7/4/23 18:18, gene heskett wrote:
On 7/4/23 16:49, John Dammeyer wrote:
Hi Gene,
I think you are overthinking the problem. .
Lets clarify where the error is, because the turn around at the bottom
of the hole is synchronized, the turn around at the
x2 sits in.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please us
ncounter one, I RTFM again. And find the bug
is mine...
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the la
ation limits as high as they can be? That
should help somewhat.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett.
--
"There are four boxes to be used in
On 7/5/23 06:50, Gregg Eshelman via Emc-users wrote:
This one has direct download links https://united3dartists.com/
That appears to be a windows program. Windows is extinct here. ;o)>
Thank you.
On Tuesday, July 4, 2023 at 11:44:50 AM MDT, gene heskett
wrote:
On 7/4/23 08:03, Gr
ue, but it is not free anymore. So I'm making parts
for stuff on 3d printers using OpenSCAD as the design software. You can
be productive quite rapidly in it.
TIA
tomp
On 7/5/23 21:44, gene heskett wrote:
On 7/5/23 06:50, Gregg Eshelman via Emc-users wrote:
This one has direct downl
tical time wise. I may be a bit
unusual, but I write my own gcode. I'm fond of subroutines, and quite
complex projects seldom run more than 600 LOC. Unwrapped, 20 gigabytes.
Thanks Dave. take care & stay well.
https://www.autodesk.com/products/fusion-360/personal
[...]
Cheers
e.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must fir
On 7/11/23 18:36, andy pugh wrote:
On Tue, 11 Jul 2023 at 23:13, gene heskett wrote:
I also have a problem with the $1000 limit, even if my total intake in
the last 2 decades is under 50 bucks for stuff I've done for OP. With
today's prices, 10 G's would be a limit I migh
On 7/12/23 02:23, Chris Albertson wrote:
On Jul 11, 2023, at 5:42 PM, gene heskett wrote:
... I'll bet real money that OpenSCAD is easier to learn.
Openscad is certainly easy for some simple things but impossible for others.
Try making a cordless power tool in OpenScad.
But in Fus
et
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
screw glued
to the spindle going by an ATS-667 hall effect. That has its own
direction problem I'm not smart enough to fix. Someday...
Not cheap in Canadian $.
https://www.digikey.ca/en/products/detail/cui-devices/AMT113Q-V/4835229
John
-Original Message-
From: gene hesket
ive seconds for it to be done automatically is actually not so bad.
John
I know, I've been thinking of doing something similar with mine. But I'm
getting lazy in my dotage. And playing with 3d printers too.
-Original Message-
From: gene heskett [mailto:ghesk...@shentel.net
-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
&quo
of the speed of a std linuxcnc install. I'd skip it
and its ilk. Not fast enough.
_______
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes
On 8/5/23 15:16, gene heskett wrote:
no, I didn't write this, someones email agent is broken when it
attributes this message to me.
On 8/5/23 14:45, Martin Dobbins wrote:
It makes me wonder which operating system they put on that Chinese
controller, and what motion control system.
M
rs@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we mus
mhf. Early, 20 minutes ago, it
fussed about python's libboost not being the expected version, but it
hasn't caused a quit yet. Working on docs ATM. Master is up to around
1350 pages with lots of new gfx so it takes a pi 4 or 5 whiles.
Cheers, Gene Heskett.
--
"There are four
On 8/10/23 19:40, gene heskett wrote:
On 8/10/23 17:45, alanmthomason--- via Emc-users wrote:
Hi There.
When I build linuxcnc and then run the standard suite of tests, I see
dozens
of tests where a line output says Running test XXX. After about 100
of that
type, I see the interp/m98m99/12
rker.
http://buildbot.linuxcnc.org/buildbot/builders/1650.rip-buster-rtpreempt-rpi4/builds/3482/steps/runtests/logs/stdio
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author
On 8/11/23 09:19, andy pugh wrote:
On Fri, 11 Aug 2023 at 14:09, gene heskett wrote:
XPASS: Passed, but was expected to fail
The buildbot log says the same thing. But oddly, the final status is:
..Note: Using POSIX non-realtime
..Runtest: 257 tests run, 257 successful, 0 failed + 0
On 8/11/23 11:59, andy pugh wrote:
On Fri, 11 Aug 2023 at 16:41, gene heskett wrote:
Same thing here Andy. but now I don't have the rest of this planets
languages installed, so how do I tell dpkg-buildpackage to build OMLY
english, utf-8 docs, Its (make-buster-debs) dying on the .de doc
On 8/11/23 22:06, gene heskett wrote:
On 8/11/23 11:59, andy pugh wrote:
On Fri, 11 Aug 2023 at 16:41, gene heskett wrote:
Same thing here Andy. but now I don't have the rest of this planets
languages installed, so how do I tell dpkg-buildpackage to build OMLY
english, utf-8 docs, Its
p right in, I'll help if I can.
For instance, where did you get or how did you make your real time image
etc. Or perhaps just point me to a recent set of notes for the
RPi/LinuxCNC.
Thanks very much,
Alan
-Original Message-
From: gene heskett
Sent: Friday, August 11, 2023 10:56 P
at it's doing?
Or have I misunderstood how the power tapping synchronized motion is done.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Hesk
outputting noise, z is going
to try and follow it.
Good luck John.
-Original Message-
From: gene heskett [mailto:ghesk...@shentel.net]
Sent: August 14, 2023 1:31 PM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Rigid tapping
On 8/14/23 15:53, John Dammeyer wrote:
This
he tab feature.
in 2.8.0 it looks like the attached png
Which I see just fine, but john blocks any attempt by me to post a
screen shot. Why am I being blocked?
Take care & stay well TomP.
Thnaks TomP
___
Emc-users mailing list
Emc-users@lists.s
B now? That ability to skip an axis would end a lot of
confusion here.
Thanks.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must
On 8/30/23 10:13, andy pugh wrote:
On Wed, 30 Aug 2023 at 10:58, gene heskett wrote:
if I enable another stepgen, it
replaces pwmgen.1
Not usually, unless you mean "if I replace the FPGA firmware with one
with a different pin assignment"
Is there now a way around this
No response from dev list in quite a while, maybe this will get to users
Forwarded Message
Subject: recent update broke display, can't run anything that needs display
Date: Wed, 6 Sep 2023 10:53:13 -0400
From: gene heskett
To: EMC developers
Greetings all;
Preparatory
601 - 700 of 11847 matches
Mail list logo