e slower than fast HD's with specific testing, and that stable
platters consume less continuous power than idle SSDs during initial
writing. My power bill tells a different story.)
Cheers,
Ted.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
htt
he PID just seems to be a clunky insertion just to force the stepgen to
run in velocity mode, so unless I completely missed the reasoning, I'm
not sure why the extra effort.
Much obliged,
Ted.
--
This email has been checked for viruses by Avast anti
etting up a virtual work plane, or actually getting coordinates to
define a hole.
There are other math items like what is the best fit for an approach
vector that is close but not exactly as calibrated? That is important
too, but baby steps, right?
Thoughts and opinions apprecia
im - as it turns out
a number of the operators liked our different layout.
Ted
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https
/plain; charset=UTF-8; format=flowed
-Ted,
?Just to comment on the pressbrake setup
Not meaning to confuse from the thread being hijacked, but since there
appears interest, I have also posted up the source project for my press
brake iteration on the form (I don't hang out there too often), bu
Date: Tue, 26 Apr 2022 09:52:11 -0700
From: "John Dammeyer"
To: "'Enhanced Machine Controller \(EMC\)'"
Subject: Re: [Emc-users] Press Brake Gui, was: Re: Variables for,
instantaneous transit vector, from python?
Message-ID:<067901d8598d$f9b466c0$ed1d3440$@autoartisans.com>
r software stepping, so cannot speak on
that particular topic.
Worst part is dealing with the 19v power supply - they are often
intolerant of anything but their own power bricks.
Ted.
--
This email has been checked for viruses by Avast antivirus software.
www
a
couple lines of manual G code really is a requirement. I don't let
anyone touch my machines that can't tell me how to use G04 and block delete.
Just some rambling from someone who doesn't blame the control,
Ted.
--
Try
between 10.5 and
13.5 vdc. It's not a bold statement spec - you have to hunt for it.
However, I'd believe it in that if you fed 13.6, it would shut down.
Cheers,
Ted.
--
Live Security Virtual Conference
Exclusive live
everything you need? Probably not. But then, I've never been one to stir
my coffee with a hammer, either.
Cheers,
Ted.
--
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security
(just put in a
line-level audio signal - it's fun) so you have a known working baseline
instead of trying to hunt down unknown peculiarities.
Cheers,
Ted.
Original Msg
Date: Sat, 1 Dec 2007 06:13:17 -0800 (PST)
From: Klemen Dovrtel [EMAIL PROTECTED]
Subject: [Emc-users] open loop galvanometer
!
Thanks,
Ted.
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great prizes
Grand prize is a trip for two to an Open Source
out. An attempted make did break
my EMC2 build. So time to wipe.
Thoughts?
Kindest regards,
Ted.
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based
Ted Hyde wrote:
7i43 (400K Spartan3) board is USB powered now (Sebastian's suggestion,
though no difference from external port was found) - and is set for EPP
firmware load/config.
I suggest starting with GPIO instead of the encoders, just to verify the
7i43 and HAL functioning before adding
into problems. It's important to take it
one step at a time and strip out as much of the complexity as possible, but
I can respect your desire to test against a confirmed functional baseline.
Keep at it - you'll get there!
Ted
conclude that the 'dog function is
completely capable. Side note also that the 5i2x has additional, separate
thread calls for gpio (can't recall if you're using them) - that the 7i43
file doesn't use currently (IIRC, per Peter, due to EPP timing
restrictions).
Ted
just the right amount of
thought for using a USB interface for this purpose.
Regards,
Ted.
On 2/7/2014 11:55 AM, emc-users-requ...@lists.sourceforge.net wrote:
--
Message: 4
Date: Fri, 07 Feb 2014 11:49:19 -0500
From: Billy Huddlestonbi...@ivdc.com
Subject: Re
until I can resolve this.
Thanks,
Ted.
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel
faults. Seemed
logical at the time that perhaps it was trying to perform some form of
lookup (like probe_parport). May have just been coincidental.
Additionally, the sample files don't include a 'loadrt epp' reference,
per the man pages - is this necessary?
Thanks,
Ted.
On 11/21/2014 10:10 AM
a 208vac 10hp drive? By the time you get higher
than 5hp, most are wanting 380-480 inputor you have to mortgage the
house. :-)
Best wishes,
Ted.
--
What You Don't Know About Data Connectivity CAN Hurt You
This paper
servo for it.
One final caveat - the firmware in my AB spindle drive is set for
forward run only - however I haven't used a tool that I need to run
backwards.
Ted.
- Original Message -
From: Clint Washburn cl...@clintandheidi.com
To: Enhanced Machine Controller (EMC) emc-users
: www.casafrog.com/cfblog -- you're welcome
to borrow whatever useful tidbits you find there.
Ted.
Clint Washburn wrote:
I am in the process of setting up classic-ladder for the tool-changer on
my Hitachi-Seiki NH500 Turret lathe. I am using a mesa 5i20 card for inputs
and opto22 relays
tune the scale values after the
fact if necessary.
Ted.
=
I got an old CNC router (phoenix) from a school district auction and am very
eager to get it going.
The old interface is using a serial cable and I need figure out how to connect
this to EMC
Andrew -
You noted that you are using step/dir into servo drives - does it follow
that your servo drives require those SPI interfaced encoders? In the
servo drives I've encountered, if it has a step/dir mode, the drive is
an intelligent one and handles the entire PID and feedback loop itself,
- outdated options. I'm a lover of Mecsoft products
myself, but would also prefer to support the OS community if something
exists. So, given a DXF profile or equivalent, what's your method of:
rough/finish, thread and grooving (and are you using gang, turret or
toolpost)?
Cheers,
Ted
to copy one page of
someone else's document is okay - every time I see a point where I'd think
hey, I wish I could interrupt and do...x.., it's quickly followed by but it
really wouldn't make any difference, since ..y... is screwed up anyway.
Just a few cents worth,
Ted
/cfblog/
Comments and suggestions always welcome.
Cheers,
Ted.
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills
to spam, but you're welcome to email,
or even keep relevant comments on-list.
Cheers,
Ted.
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine
the unit! rishard is in Nescopeck, PA and if you drop by my blog
you'll also note that the freight/trucking company a few miles from his
place was quite helpful! (And apologies for the somewhat weird post).
Does anyone make bumper stickers for Save Old Iron? :-)
Ted
who mis-interpreted or assumed a relation. Thus, they want to follow
every feature on the page, wrong or not!
Ted.
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling
find a practical use for it.
Ted.
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
parameter for the homing setup).
Ted.
EKCo Inc Don Stanley wrote:
Hi All;
I have installed EMC 2.3 on a lathe using the Motenc Light interface.
Two problems have me stumped.
1- I want to Home at the Encoder Index after using Plus-limit / Home
combination Switch
.
Opinions and Thoughts welcome!
Thanks,
Ted.
--
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
process here at:
http://www.casafrog.com/cfblog/ or the turret-specific pages starting
around: http://www.casafrog.com/cfblog/?p=1214
Cheers,
Ted.
--
The Palm PDK Hot Apps Program offers developers who use the
Plug
restrictive) soft limits. There may be other ways to
accomplish this already, however.
Ted.
Message: 7
Date: Mon, 30 Aug 2010 21:36:57 -0500
From: Daniel Gollermor...@gmail.com
Subject: Re: [Emc-users] Emc2 Safe Zone ?
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
the reason that practically no one else out there is even
attempting this (aside from research institutions).
It always amazes me for what many perceive as a Hobby platform how
absolutely cutting edge the stuff that is done here is!
Ted.
Stuart Wrote:Date: Wed, 17 Nov 2010 11:23:44 -0600
From: Stuart
fault if M100 is called
without an associated program, could EMCTask check for the existence of
M53 (and thus any non-implemented code) in the PROGRAM_PREFIX directory
as well by default?
Thanks,
Ted.
--
What happens
(perhaps
like #5211-5219?)
Thanks,
Ted.
--
Protect Your Site and Customers from Malware Attacks
Learn about various malware tactics and how to avoid them. Understand
malware threats, the impact they can have on your business
already has
Regards,
Ted.
--
How ServiceNow helps IT people transform IT departments:
1. A cloud service to automate IT design, transition and operations
2. Dashboards that offer high-level views of enterprise
) which in that aspect, would return a much more
accurate result. Since the software has to chew on the scanning
result, it would actually be dangerous to have this type of interruption
(and I guarantee it would be an interruption) to the safety of the LCNC
realtime loop.
Ted
, sometimes the grey matter still
exceeds the silicon.
Ted.
On 12 June 2013 13:52, jeremy youngs jcyoung...@gmail.com wrote:
not exactly just compare it to an iges file that will never change . or
other parametric solid
Going from a point-cloud to a parametric solid is not even slightly easy
) that in doing so strands all the previous
users like say, Mazak's T series versus their Matrix series. A user
could follow the upgrade path if needed, but isn't forced to.
Ted.
On 6/13/2013 9:14 AM, emc-users-requ...@lists.sourceforge.net wrote:
On 13 June 2013 12:07, Charles Steinkuehlerchar
using PICs as my
encoder counters, over a little I2C net to a master that sends out the
packets of angles to the Unity App via RS232 or BT. But it's not the
only way.
This wouldn't really fit as the poor man's dig arm, but it does fit as
this poor man's dig arm!
Ted
was referencing are the same
ones used to build the initial MT adapter.
If there are some that wish to form a collaboration on something like
this, I'd be happy to contribute, though!
Ted.
On 8/30/2013 12:30 PM, emc-users-requ...@lists.sourceforge.net wrote:
Is MTConnect something worth learning more about
a theatre-centric technology experience.
Regards,
Ted.
On 10/15/2013 10:32 PM, emc-users-requ...@lists.sourceforge.net wrote:
Subject: [Emc-users] OT, Pic controller? needed for high school play
To: Enhanced Machine Controller \(EMC\)
emc-users@lists.sourceforge.net
Message-ID
itself everywhere!
Ted.
--
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest
accomplish this?
Thanks,
Ted.
--
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get
= 0.0
HOME_LATCH_VEL =0.0
HOME_USE_INDEX =NO
HOME_IGNORE_LIMITS =NO
HOME_SEQUENCE = 0
// Axis 1 2 are practical duplicates of above.
Thanks,
Ted
the mercy of the userspace update loop of course.
The SMC2000 controls feedrate, as well as has its own interlock and
e-stop loops for safety.
If anyone has used an SMC 2000/4000 platform before, I'd certainly
appreciate any advice that comes my way.
Regards,
Ted.
---
This email has been checked f
Axis' MDI: o<300> call [1.0]
[2.0] [3.0] [4.0] [5.0] [6.0] [7.0] [8.0]
will cause it to fail..
Calling only o<300> call [1.0] [2.0] [3.0] [4.0]
will run, but of course a full routine is missing parameters 5-8.
Running (Axis) 2.7.0 on Wheezy from LiveCD install.
ep this all in python, or does it need a
companion halcomp, and if so, how does one pass data between comps and
python?
Thanks,
Ted.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
ing the die
between the multiple operations - you know your craft well!
Ted.
On 2/5/2019 7:03 AM, emc-users-requ...@lists.sourceforge.net wrote:
Date: Mon, 4 Feb 2019 21:47:25 -0600
From: Chris Kelley
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] CNC Press
52 matches
Mail list logo
