Even though there have been back-and-forth discussions here on this exact topic
(using save-as to create a pdf or that this Framemaker bug has been fixed), the
only way I can be absolutely sure I don't have the problem that you have is to
print via the Adobe Acrobat printer instance (I think
Even though there have been back-and-forth discussions here on this exact topic
(using save-as to create a pdf or that this Framemaker bug has been fixed), the
only way I can be absolutely sure I don't have the problem that you have is to
print via the Adobe Acrobat "printer instance" (I think
The only thing I know for sure (found while researching for my own problems
that
started the recent FrameMaker has detected a problem and must quit Really?!
thread is that 11004 means that you're running FrameMaker version 11 (like
you
stated).
The rest is a big secret.
-- Ken in Atlanta
The only thing I know for sure (found while researching for my own problems
that
started the recent "FrameMaker has detected a problem and must quit" Really?!
thread is that "11004" means that you're running FrameMaker version 11 (like
you
stated).
The rest is a big secret.
-- Ken in
To all,Maybe I'm wrong but the argumentative tone of all of this with regards to my question is the pits.As far as I'm concerned:1. Contact Shekhar at tcs...@adobe.com and discuss it with him.2. We did what he told us to do.3. No more problems (so far).OK?-- KenFrom: Kapil Verma
2013 4:08:42 PMSubject: RE: "FrameMaker has detected a problem and must quit" Really?!
All, Sorry I couldn’t respond to this thread earlier. Driving much of the day yesterday and I don’t “do e-mail” while driving. J I am seriously hoping that there was a serious
misunderstanding between
To: Ken Poshedly poshe...@bellsouth.net; framers@lists.frameusers.com
framers@lists.frameusers.com
Cc: techw...@techwr-l.com techw...@techwr-l.com
Sent: Thu, February 14, 2013 4:39:30 PM
Subject: RE: FrameMaker has detected a problem and must quit Really?!
Ken Poshedly wrote:
Fourth, my coworker has
To all,
Maybe I'm wrong but the argumentative tone of all of this with regards to my
question is the pits.
As far as I'm concerned:
1. Contact Shekhar at tcssup at adobe.com and discuss it with him.
2. We did what he told us to do.
3. No more problems (so far).
OK?
-- Ken
I posted my first frameusers list inquiry Wednesday morning, but never saw it
or
any replies for quite sometime.
After waiting an hour or so and not seeing either my message or any replies on
the frameusers list, I posted to the techwr-l e-mail list (and also
cross-posted
to the frameusers
I posted my first frameusers list inquiry Wednesday morning, but never saw it
or
any replies for quite sometime.
After waiting an hour or so and not seeing either my message or any replies on
the frameusers list, I posted to the techwr-l e-mail list (and also
cross-posted
to the frameusers
l.com"
Sent: Thu, February 14, 2013 4:08:42 PM
Subject: RE: "FrameMaker has detected a problem and must quit" Really?!
All,
Sorry I couldn?t respond to this thread earlier. Driving much of the day
yesterday and I don?t ?do e-mail? while driving. J
I am seriously hoping that th
To all,
My coworker is running FrameMaker 11.0 and is frustrated because twice this
morning, FrameMaker crashed on his terminal (luckily creating recovery files,
though).
The warning pop-up window that displayed announcing this glorious impending
shutdown stated Internal Error 11014, 8122692,
From: Ken Poshedly poshe...@bellsouth.net
To: techw...@techwr-l.com
Sent: Wed, February 13, 2013 10:47:05 AM
Subject: FrameMaker has detected a problem and must quit Really?!
To all,
Please excuse this x-posting (Framemaker list), but no replies at all from
there
so far.
My coworker
Yes, an .lck file is created but perhaps it no longer does what it used to do
before. Capisce?
-- Ken in Atlanta
From: Robert Lauriston rob...@lauriston.com
To: Ken Poshedly poshe...@bellsouth.net; framers@lists.frameusers.com;
TECHWR-L techw...@techwr
?
-- Ken in Atlanta
From: Robert Lauriston rob...@lauriston.com
To: Ken Poshedly poshe...@bellsouth.net; framers@lists.frameusers.com;
TECHWR-L techw...@techwr-l.com
Sent: Wed, February 13, 2013 12:11:02 PM
Subject: Re: FrameMaker has detected
...@lauriston.com; framers@lists.frameusers.com; techw...@techwr-l.com
Yes, an .lck file is created but perhaps it no longer does what it used to do
before. Capisce?
-- Ken in Atlanta
From: Robert Lauriston rob...@lauriston.com
To: Ken Poshedly poshe
quit Really?!
On Wed, Feb 13, 2013 at 8:55 AM, Ken Poshedly poshe...@bellsouth.net wrote:
I just learned from Adobe tech support (via phone call) that the permissions
in
FrameMaker 11.0 have been modified so that the data files should also be on
the
same hard drive where FM 11.0 is installed
-l.com
Subject: RE: FrameMaker has detected a problem and must quit Really?!
On Wed, Feb 13, 2013 at 8:55 AM, Ken Poshedly poshe...@bellsouth.net wrote:
I just learned from Adobe tech support (via phone call) that the permissions
in
FrameMaker 11.0 have been modified so that the data files
To all,
My coworker is running FrameMaker 11.0 and is frustrated because twice this
morning, FrameMaker crashed on his terminal (luckily creating recovery files,
though).
The warning pop-up window that displayed announcing this glorious impending
shutdown stated "Internal Error 11014,
.
-- Ken in Atlanta
________
From: Ken Poshedly <poshe...@bellsouth.net>
To: techwr-l at techwr-l.com
Sent: Wed, February 13, 2013 10:47:05 AM
Subject: "FrameMaker has detected a problem and must quit" Really?!
To all,
Please excuse this x-posting (Framemaker list), but no
Yes, an .lck file is created but perhaps it no longer does what it used to do
before. Capisce?
-- Ken in Atlanta
From: Robert Lauriston <rob...@lauriston.com>
To: Ken Poshedly ; framers at lists.frameusers.com;
TECHWR-L
Sent: Wed, February 13, 2013
Yes, an .lck file is created but perhaps it no longer does what it used to do
> before. Capisce?
>
> -- Ken in Atlanta
>
>
>
>
>
>
> From: Robert Lauriston
> To: Ken Poshedly ; framers at
> lists.frameusers.com;
> TECHWR-L
llsouth.net
> Subject: Re: "FrameMaker has detected a problem and must quit" Really?!
> To: robert at lauriston.com; framers at lists.frameusers.com; techwr-l at
> techwr-l.com
>
> Yes, an .lck file is created but perhaps it no longer does what it used to do
> before.
To: Fred Ridder ; "poshedly at bellsouth.net"
; "robert at lauriston.com" ;
"framers at lists.frameusers.com" ;
"techwr-l at techwr-l.com"
Sent: Wed, February 13, 2013 2:24:07 PM
Subject: RE: "FrameMaker has detected a problem and must quit" Really?
t; robert at lauriston.com;
framers at lists.frameusers.com; techwr-l at techwr-l.com
Subject: RE: "FrameMaker has detected a problem and must quit" Really?!
On Wed, Feb 13, 2013 at 8:55 AM, Ken Poshedly wrote:
> I just learned from Adobe tech support (via phone call) that the permis
The file order has always been reversed for me when adding multiple files to a
book going back to Frame 7 and possibly even Frame 5.5 which I learned back in
1998).
And it didn't matter if it was Windows 98 or Windows XP (currently and for as
long as possible).
-- Ken in Atlanta
The file order has always been reversed for me when adding multiple files to a
book going back to Frame 7 and possibly even Frame 5.5 which I learned back in
1998).
And it didn't matter if it was Windows 98 or Windows XP (currently and for as
long as possible).
-- Ken in Atlanta
This MAY have been asked previously but I don't recall seeing it.
Is there a way of changing the Graphics -- Runaround Properties from the
default Runaround and Contour to a new default Not Runaround?
For our purposes here, this new default is what we need.
-- Ken in Atlanta
apologies for how my previous message appeared. to speed things up, I just pick
a previous post and modify it -- but goofed this last time.
the question, however, still remains.
___
You are currently subscribed to framers as arch...@mail-archive.com.
This MAY have been asked previously but I don't recall seeing it.
Is there a way of changing the Graphics --> Runaround Properties from the
default "Runaround and Contour" to a new default "Not Runaround"?
For our purposes here, this new default is what we need.
-- Ken in Atlanta
apologies for how my previous message appeared. to speed things up, I just pick
a previous post and modify it -- but goofed this last time.
the question, however, still remains.
-- next part --
An HTML attachment was scrubbed...
URL:
To all,
Rick e-mailed me on Monday that the double bypass surgery was a success and
that
he'll be back online in the near future. He's even trying to update his blog.
-- Ken in Atlanta___
You are currently subscribed to framers as
To all,
Rick e-mailed me on Monday that the double bypass surgery was a success and
that
he'll be back online in the near future. He's even trying to update his blog.
-- Ken in Atlanta
-- next part --
An HTML attachment was scrubbed...
URL:
to do my own installations and record the data as described.
From: Syed Zaeem Hosain (syed.hos...@aeris.net) syed.hos...@aeris.net
To: Stuart Rogers srog...@phoenix-geophysics.com; Ken Poshedly
poshe...@bellsouth.net
Cc: framers@lists.frameusers.com framers
It's now about 4:15 EDT -- well after your surgery.
Trust me, we wait with bated breath until we get even a one- or two-word note
from your or someone close to you that all is well.
--Ken in Atlanta
From: Rick Quatro r...@rickquatro.com
To:
to do my own installations and record the data as described.
From: "Syed Zaeem Hosain (Syed.Hosain at aeris.net)" <syed.hos...@aeris.net>
To: Stuart Rogers ; Ken Poshedly
Cc: "framers at lists.frameusers.com"
Sent: Wed, June 20, 2012
It's now about 4:15 EDT -- well after your surgery.
Trust me, we wait with bated breath until we get even a one- or two-word note
from your or someone close to you that all is well.
--Ken in Atlanta
From: Rick Quatro
To: framers at
Due to some real snafu's at my company regarding mix-ups of what FrameMaker CD
was installed on what computer, I have little faith on even if the correct CD's
are in the various plastic cases with serial numbers.
Therefore, is there any way to determine the serial number of any particular
Due to some real snafu's at my company regarding mix-ups of what FrameMaker CD
was installed on what computer, I have little faith on even if the correct CD's
are in the various plastic cases with serial numbers.
Therefore, is there any way to determine the serial number of any particular
Is there a way to set the “Runaround Properties” (in FrameMaker 8) to default
to
“not runaround”.
I assume that like everything else, it’s a setting in an “ini” file.
But which one and which line and how to accomplish this?
--Kenpo in Atlanta
___
Is there a way to set the ?Runaround Properties? (in FrameMaker 8) to default
to
?not runaround?.
I assume that like everything else, it?s a setting in an ?ini? file.
But which one and which line and how to accomplish this?
--Kenpo in Atlanta
-- next part --
An HTML
Nancy,
We number our images as described earlier (a text box positioned below the
graphic with both the graphic and text box within an anchored frame).
In our case, our style is for the anchored frame is consistently 3.25 inches
wide, variable height, right-aligned (on the right side of
Hi Nancy,
Yes, we created a paragraph tag with that name and defined it as described.
But a previous member of the tech pubs department here haphazardly did what he
wanted to do. He couldn't write, wouldn't follow directions, wouldn't
spell-check, wouldn't proofread, but DID create or modify
Nancy,
We number our images as described earlier (a text box positioned below the
graphic with both the graphic and text box within an anchored frame).
In our case, our style is for the anchored frame is consistently 3.25 inches
wide, variable height, right-aligned (on the right side of
Hi Nancy,
Yes, we created a paragraph tag with that name and defined it as described.
But a previous member of the tech pubs department here haphazardly did what he
wanted to do. He couldn't write, wouldn't follow directions, wouldn't
spell-check, wouldn't proofread, but DID create or modify
and don't mean anything.
And yes, I have been and continue to desperately scour the Net for another
place
to go.
From: Syed Zaeem Hosain (syed.hos...@aeris.net) syed.hos...@aeris.net
To: Ken Poshedly poshe...@bellsouth.net; framers@lists.frameusers.com
Agreed.
From: Syed Zaeem Hosain (syed.hos...@aeris.net) syed.hos...@aeris.net
To: Ken Poshedly poshe...@bellsouth.net; framers@lists.frameusers.com
framers@lists.frameusers.com
Sent: Thu, May 10, 2012 9:25:59 PM
Subject: RE: Running page header/footer spacin
stuff" and don't mean anything.
And yes, I have been and continue to desperately scour the Net for another
place
to go.
From: "Syed Zaeem Hosain (Syed.Hosain at aeris.net)" <syed.hos...@aeris.net>
To: Ken Poshedly ; "framers at li
Agreed.
From: "Syed Zaeem Hosain (Syed.Hosain at aeris.net)" <syed.hos...@aeris.net>
To: Ken Poshedly ; "framers at lists.frameusers.com"
Sent: Thu, May 10, 2012 9:25:59 PM
Subject: RE: Running page header/footer spacin question
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Kenneth C. Benson
Sent: Wednesday, May 09, 2012 7:00 AM
To: framers@lists.frameusers.com
Subject: Re: Running page header/footer spacin question
On 5/8/2012 10:44 AM, Ken Poshedly wrote:
* The manual chapter title is keyed in and manually
Cripe, here we go again! No sooner than I learn how to correctly set up running
headers in our tech manuals to help the operator of a 300-ton crane for
instance
know just where he is with the currently open chapter when my coworker decides
he doesn’t like the idea of using this technique
ameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Kenneth C. Benson
>Sent: Wednesday, May 09, 2012 7:00 AM
>To: framers at lists.frameusers.com
>Subject: Re: Running page header/footer spacin question
>
>
On 5/8/2012 10:44 AM, Ken Poshedly wrote:
>
>
Cripe, here we go again! No sooner than I learn how to correctly set up running
headers in our tech manuals to help the operator of a 300-ton crane for
instance
know just where he is with the currently open chapter when my coworker decides
he doesn?t like the idea of using this technique
Gang and Other Frame-anistas!
We here are considering modifying the page headers in our tech manuals to state
the current topic level 1 headings as they progress through a chapter.
Currently, the page headers are set up as follows:
* The product name (as a variable) is placed towards
Gang and Other Frame-anistas!
We here are considering modifying the page headers in our tech manuals to state
the current topic level 1 headings as they progress through a chapter.
Currently, the page headers are set up as follows:
* The product name (as a variable) is placed towards
Well, my company find took the pricey plunge and purchased the upgrade version
of FM10 for my coworker and I (we both use FM8, though I use it better than he
does, if you recall my previous posts).
Anyway, I'm still timid about doing the upgrade installation until I can come
up
with a
I don't know if this is close to what you're doing, but I've had success with
copying a table in Word or Excel, then pasting it as Rich Text Format directly
into the FM doc.
Then I select the entire table and use Table Table Designer and the other FM
tools and techniques to make it look like
Hi Joe,
You're correct, and I've already contact good ol' Rick.
-- Ken
From: Joseph Lorenzini jalo...@gmail.com
To: poshe...@bellsouth.net
Cc: FrameMaker Forum framers@lists.frameusers.com
Sent: Sat, April 14, 2012 1:17:30 PM
Subject: Re:archive for Frame10?
Hi Joe,
You're correct, and I've already contact good ol' Rick.
-- Ken
From: Joseph Lorenzini
To: poshedly at bellsouth.net
Cc: FrameMaker Forum
Sent: Sat, April 14, 2012 1:17:30 PM
Subject: Re:archive for Frame10?
Hi Ken,
I would not
Well, my company find took the pricey plunge and purchased the upgrade version
of FM10 for my coworker and I (we both use FM8, though I use it better than he
does, if you recall my previous posts).
Anyway, I'm still timid about doing the upgrade installation until I can come
up
with a
I don't know if this is close to what you're doing, but I've had success with
copying a table in Word or Excel, then pasting it as Rich Text Format directly
into the FM doc.
Then I select the entire table and use Table > Table Designer and the other FM
tools and techniques to make it look like
: Ken Poshedly poshe...@bellsouth.net
To: Shlomo Perets shlo...@microtype.com
Cc: framers@lists.frameusers.com
Sent: Thu, March 22, 2012 11:40:07 AM
Subject: Re: best use of graphics in FM
First, thanks to all who have written to me both on-list and off-list. It’s
certainly good to have a support
vity, but it's just boiling over.
-- Ken, in hell
____
From: Ken Poshedly <poshe...@bellsouth.net>
To: Shlomo Perets
Cc: framers at lists.frameusers.com
Sent: Thu, March 22, 2012 11:40:07 AM
Subject: Re: best use of graphics in FM
First, thanks to all who have written to me both on-list an
file, specifically line 4
(Error: typecheck . . .) and what follows it?
-- Kenpo in a hellish place
From: Ken Poshedly poshe...@bellsouth.net
To: FrameMaker Users List framers@lists.frameusers.com
Sent: Tue, March 20, 2012 9:59:00 PM
Subject: best use
I didn't see my own posting come up even hours later, so please excuse me if it
did, in fact, make it. In any case, please see below.
-- Ken
- Forwarded Message
From: Ken Poshedly poshe...@bellsouth.net
To: FrameMaker Users List framers@lists.frameusers.com
Sent: Wed, March 21, 2012
afternoon. It worked. (Specifically, I unchecked the box for
“Generate
Acrobat Data”.)
-- Ken in Atlanta
From: Shlomo Perets shlo...@microtype.com
To: Ken Poshedly poshe...@bellsouth.net
Cc: framers@lists.frameusers.com
Sent: Thu, March 22, 2012 6:49:03 AM
Subject
afternoon. It worked. (Specifically, I unchecked the box for
?Generate
Acrobat Data?.)
-- Ken in Atlanta
From: Shlomo Perets <shlo...@microtype.com>
To: Ken Poshedly
Cc: framers at lists.frameusers.com
Sent: Thu, March 22, 2012 6:49:03 AM
Subject: Re: be
file, specifically line 4
(Error: typecheck . . .) and what follows it?
-- Kenpo in a hellish place
From: Ken Poshedly <poshe...@bellsouth.net>
To: FrameMaker Users List
Sent: Tue, March 20, 2012 9:59:00 PM
Subject: best use of graphics in FM
Fram
I didn't see my own posting come up even hours later, so please excuse me if it
did, in fact, make it. In any case, please see below.
-- Ken
- Forwarded Message
From: Ken Poshedly <poshe...@bellsouth.net>
To: FrameMaker Users List
Sent: Wed, March 21, 2012 4:57:39 PM
Subje
FrameMaker 8.0 on a PC with Windows XP Professional
Except for bloated file sizes, in the long run, does it really matter if you
reference graphics or if you embed them inside your publications?
My coworker is a guy who was tech pubs manager at another heavy equipment
company but was convinced
FrameMaker 8.0 on a PC with Windows XP Professional
Except for bloated file sizes, in the long run, does it really matter if you
reference graphics or if you embed them inside your publications?
My coworker is a guy who was tech pubs manager at another heavy equipment
company but was convinced
Please forgive me if you saw this post from me on February 3. For whatever
reason, my link to this list was lost so if anyone posted a reply, I never saw
it.
But then again, if nobody answered my plea, I _really_ do need some advice.
I resubscribed to the list today.
Having just upgraded to
Please forgive me if you saw this post from me on February 3. For whatever
reason, my link to this list was lost so if anyone posted a reply, I never saw
it.
But then again, if nobody answered my plea, I _really_ do need some advice.
I resubscribed to the list today.
Having just upgraded to
Quick question that I can't seem to find documented in FrameMaker 8.0 (on a
Windows Vista platform).
I inserted a variable for Creation date (long) in my master page footer and
it displays July 1998.
Where is the feature to allow me to specify a desired month and year?
-- Kenpo in Atlanta
Fred et al,
I created a new variable Issue Date and specified April 2010 and it works.
The reason for this? We sent a half dozen or so pdf files with the then-current
issue months to the parent company to print in China back in December and
January. We're STILL waiting. So I want the
Quick question that I can't seem to find documented in FrameMaker 8.0 (on a
Windows Vista platform).
I inserted?a variable for "Creation date (long)" in my master page footer and
it displays July 1998.
Where is the feature to allow me to specify a desired?month and year?
-- Kenpo in Atlanta
Fred et al,
I created a new variable "Issue Date" and specified April 2010 and it works.
The reason for this? We sent a half dozen or so pdf files with the then-current
issue months to the parent company to print in China back in December and
January. We're STILL waiting. So?I want the
in Atlanta
Date: Tue, 23 Feb 2010 10:49:57 -0800 (PST)
From: Ken Poshedly poshe...@bellsouth.net
Subject: Fw: One problem down, one new one comes up
To: FrameMaker Users List framers@lists.frameusers.com
Just to let all of you know that a suggestion by Simon North about
ABBY PDF Transformer seems
in Atlanta
>Date: Tue, 23 Feb 2010 10:49:57 -0800 (PST)
>From: Ken Poshedly
>Subject: Fw: One problem down, one new one comes up
>To: FrameMaker Users List
>
>Just to let all of you know that a suggestion by Simon North about
>ABBY PDF Transformer seems to be the answe
Thanks to all who contributed suggestions to me regarding the problem I had
with page numbers for a TOC I was producing.
The problem was that no matter what I did, a preceding hyphen (dash, whatever)
appeared with the numerical page number digit.
Apparently, the problem was caused by a glitch.
Hey Fred,
Got it, but it won't happen no more. grin
-- Kenpo
From: Fred Ridder docu...@hotmail.com
To: poshe...@bellsouth.net; framers@lists.frameusers.com
Sent: Tue, February 23, 2010 10:19:51 AM
Subject: RE: One problem down, one new one comes up
Ken
and at the very end are the
words, And then a miracle happens.
In any case, I accept that you are correct and I have much to learn from you.
-- Kenpo
From: Combs, Richard richard.co...@polycom.com
To: Ken Poshedly poshe...@bellsouth.net; FrameMaker Users List
framers
Thanks to all who contributed suggestions to me regarding the problem I had
with?page numbers for a TOC I was producing.
The problem was that no matter what I did, a preceding hyphen (dash, whatever)
appeared with the numerical page number digit.
Apparently, the problem was caused by a glitch.
Hey Fred,
Got it, but it won't happen no more.
-- Kenpo
From: Fred Ridder <docu...@hotmail.com>
To: poshedly at bellsouth.net; framers at lists.frameusers.com
Sent: Tue, February 23, 2010 10:19:51 AM
Subject: RE: One problem down, one new one comes u
mathematical equations and at the very end are the
words, "And then a miracle happens."
In any case, I accept that you are correct and I?have much to learn from you.
-- Kenpo
From: "Combs, Richard" <richard.co...@polycom.com>
To
The review on C-Net is only so-so, but if it does what I
need, tough. Let's hear one for Simon!
-- Kenpo in Atlanta
?
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Ken Poshedly
Sen
#) for your chapters and traditional roman numbering
(i, ii, etc.) for your frontmatter, then you have to use different
master pages for the frontmatter files.
Richard
--
From: framers-boun...@lists.frameusers.com on behalf of Ken Poshedly
Sent: Mon 2/15/2010 7:14 PM
To: framers
outs from a chapter file
>to your frontmatter files. If you're going to use folio numbering
>(chapter#-page#) for your chapters and traditional roman numbering
>(i, ii, etc.) for your frontmatter, then you have to use different
>master pages for the frontmatter files.
>
>Ri
FM8.0 on a Windows Vista platform
I'm sure there's a simple answer for this, but I've really tried all
I can think of and can't seem to find a way to get rid of the
preceding hyphen for a page number within a footer.
Like it or not, I'm trying to place just a single, lower-case Roman
numeral
FM8.0 on a Windows Vista platform
I'm sure there's a simple answer for this, but I've really tried all
I can think of and can't seem to find a way to get rid of the
preceding hyphen for a page number within a footer.
Like it or not, I'm trying to place just a single, lower-case Roman
numeral
Group,
I've check the FrameMaker help feature, Googled for it, and poked all over
the Reference page and paragraph formatting menus for this one, but with no
luck so far.
The parts book I'm working on includes nearly 150 lists (tables), all formatted
the same, with the line art graphic on the
, Ken Poshedly wrote:
Group,
I've check the FrameMaker help feature, Googled for it, and poked all
over the Reference page and paragraph formatting menus for this one,
but with no luck so far.
The parts book I'm working on includes nearly 150 lists (tables), all
formatted the same
Group,
I've check the FrameMaker help feature, Googled for it, and poked all over
the?Reference page and paragraph formatting menus for this one, but with no
luck so far.
The parts book I'm working on includes nearly 150 lists (tables), all formatted
the?same, with the line art graphic on the
Sorry, I forgot to include Frame 8.0 on a Windows Vista pc platform.
-- Kenpo
- Forwarded Message
From: Ken Poshedly <poshe...@bellsouth.net>
To: FrameMaker Users List
Sent: Fri, February 5, 2010 2:13:40 PM
Subject: tabs in table cells, eh wot?
Group,
I've check the Fram
2010 2:13 PM, Ken Poshedly wrote:
> Group,
>
> I've check the FrameMaker help feature, Googled for it, and poked all
> over the Reference page and paragraph formatting menus for this one,
> but with no luck so far.
>
> The parts book I'm working on includes nearly 150 list
Of Combs, Richard
Sent: Tuesday, December 01, 2009 1:24 PM
To: Ken Poshedly; FrameMaker Users List
Subject: RE: global header change?
Ken Poshedly wrote:
Argg!
They changed the product name! And AFTER the book was done, pdf'd and sent
overseas for printing!
I put a hold on it, but now have
Simply-put, yep.
-- Kenpo
From: David Spreadbury dspre...@yahoo.com
To: Ken Poshedly poshe...@bellsouth.net; Diane Gaskill
dgcal...@earthlink.net; Combs, Richard richard.co...@polycom.com;
FrameMaker Users List framers@lists.frameusers.com
Sent: Fri, January
f Of Combs, Richard
Sent: Tuesday, December 01, 2009 1:24 PM
To: Ken Poshedly; FrameMaker Users List
Subject: RE: global header change?
Ken Poshedly wrote:
> Argg!
>
> They changed the product name! And AFTER the book was done,?pdf'd and sent
> overseas for printing!
>
> I
Simply-put, yep.
-- Kenpo
From: David Spreadbury <dspre...@yahoo.com>
To: Ken Poshedly ; Diane Gaskill ; "Combs, Richard" ; FrameMaker
Users List
Sent: Fri, January 29, 2010 2:54:03 PM
Subject: RE: global header change?
Ken,
Updating the
Argg!
They changed the product name! And AFTER the book was done, pdf'd and sent
overseas for printing!
I put a hold on it, but now have to go back and change the headers to indicate
the new model name.
Other than opening each book file and changing the header text one file at a
time, is
101 - 200 of 223 matches
Mail list logo