Thank you All for getting back to me. As always MANY good recommendations. I
have decided to go with PureText. After some experimentation, I really like it.
Now to start digging through the 193 pages of Word.
Stay Safe and Healthy Everyone.
Rick
Richard Melanson
Technical Writer|HighRes
I thought about this way but I didn't trust the copy/paste function to only
bring over text. You ever have any problems after with garbage left over from
Word?
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail
The Word file I inherited does not use any formatting standard, it's just a 193
pages of mish mash of whatever any given editor felt like doing at the time.
I'm probably going to have to go to text then into Frame and manually assign
the formatting. YUCK :-)
Richard Melanson
Technical
Thank you Carol,
Good point on the virus, I hadn't thought of that. I was just concerned I had
stepped out of line.
And thank you again, I will dig through the archives and see what I can come up
with.
Stay healthy.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient. If you are not the intended recipient, you
are hereby
%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
You would think I knew that after all these years :-)
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient
Where did my picture go??
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient. If you are not the intended
I too was on a Sun 3/50. Then moved to Windows, see the attached picture.
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone
Everyone.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient. If you are not the intended recipient, you
give me Everyone.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient. If you are not the intended
I have Tech Comm Suite 2017 which includes Acrobat 2017, I updated only Frame
to 2019 and I have not had any problems. Hope this helps John.
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may
Somewhat off topic, what does everyone think about not having a revision
history in user manuals. My company has decided they do not want this in any
customer facing docs.
Thank you for your replies.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan
"The more you tighten your grip, Adobe, the more Users you will lose or will
slip through your fingers."
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
This e-mail message may contain confidential informati
Tammy,
I would recommend Googling FIGS and the word translation together. FIGS =
French Italian German Spanish.
You will get so many answers to your questions below you won't know where to
start :-)
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan
Either or both of these happening "stinks" shame on Adobe.
Adobe is discontinuing support for any type of upgrade for perpetual licenses.
Adobe will be switching OFF perpetual licenses [both for new & renewal]
WORLDWIDE.
Richard Melanson
Technical Writer|HighRes
Below is an email received from Adobe in May.
-
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone
ed because I feet offended.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipient. If you are not th
Everyone,
I heard that Adobe is discontinuing support for any type of upgrade for
perpetual licenses. The Adobe Software assurance is getting eliminated. Can
anyone confirm??
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
Don't mean to be nit-picky, shouldn't it be 15.0.3.603. Hope this helps.
[cid:image001.png@01D5073B.0A2EECD0]
[cid:hrblogodarkblue2_2f67ddc7-ca72-4544-969f-c253183ffd5c.png]
Richard Melanson
Technical Writer | HighRes Biosolutions
T:781.932.1912 x1160 | rmelan...@highresbio.com
it
would cost to get this outsourced. Anyone want to give me a dollar figure they
would want to do this.
Thanks again Everyone.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain
Wow these are great. Thank you for posting this to the list.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com
This e-mail message may contain confidential information and may not be used by
anyone but the intended
mp back up to using
Frame again.
Thank you.
Rick
Richard Melanson
Technical Writer|HighRes Biosolutions
T:781.932.1912x1160|rmelan...@highresbio.com
www.highresbio.com???
This e-mail message may contain confidential information and may not be used by
anyone but the intended recipien
You are the Man Rick. I have been using Frame since before it was ported from
Unix to Windows, a long time ago. I make sure I read all your emails, they are
always valuable.
Keep up the good work Rick and thank you.
-Original Message-
From: Framers
s possible,
but it's a painful and time-consuming kludge compared with tools that make it
easy to assemble multiple books from a pool of topics.
The tradeoff is that FrameMaker is better at PDFs than any of those tools.
On Wed, Oct 10, 2018 at 1:38 PM Richard Melanson
wrote:
>
>
Why am I reading on a FrameMaker list that other products do things better ???
Even if in your opinion they do, we don't need to hear it.
-Original Message-
From: Framers
[mailto:framers-bounces+rmelanson=highresbio@lists.frameusers.com] On
Behalf Of Lin Sims
Sent: Wednesday,
Nobody ??
-Original Message-
From: Framers
[mailto:framers-bounces+rmelanson=highresbio@lists.frameusers.com] On
Behalf Of Richard Melanson
Sent: Thursday, September 20, 2018 4:36 PM
To: An email list for people using Adobe FrameMaker software.
Subject: [Framers] OFF TOPIC: Adobe
Everyone,
I am currently using adobe CS4, which has Bridge, Device Central, Dreamweaver,
Drive, Extend Script, Extension Manager, FireWorks, Flash Pro, Illustrator,
InDesign, Media Encoder, and Photoshop.
My company will not spring for the subscription for these or even some of
these, so I am
I had gotten approval from my supervisor to purchase this. I am NOT going to
allow the PO to go any further until Adobe fixes all the problems I am hearing
about.
-Original Message-
From: Framers
[mailto:framers-bounces+rmelanson=highresbio@lists.frameusers.com] On
Behalf Of
My company purchase TC 2017 a little over a year ago, and 44 days after the
purchase, I remember the number because Adobe fussed a little, an upgrade came
out. After pushing Adobe, they gave it to me no charge.
I would guess you will have no problem getting the latest version.
-Original
THANK YOU Everyone. All the translation responses have been outstanding.
Rick
-Original Message-
From: Framers
[mailto:framers-bounces+rmelanson=highresbio@lists.frameusers.com] On
Behalf Of Richard Melanson
Sent: Wednesday, July 26, 2017 1:37 PM
To: framers@lists.frameusers.com
Hello Framers,
Anyone want to recommend a good translation company. Going to start with
German.
Thank you All.
Rick
___
This message is from the Framers mailing list
Send messages to framers@lists.frameusers.com
Visit the list's homepage at
Hello Everyone,
My company just upgraded from SolidWorks 2014 to 2017 and they no longer can
give me .u3d files. I bet some of you have run into this, what are you doing,
is there some wort of workaround. This really stinks.
Thank you for any help you can give me.
Rick
Richard Melanson
I use Microsoft Photo Editor. You can simply select the graphic you
want, copy it and paste it into Photo Editor with no loss of quality and
you also have multiple formats to save it as out of Photo Editor. I use
this for Word XP, 2003, and 2007. Hope this helps.
Rick
I use Microsoft Photo Editor. You can simply select the graphic you
want, copy it and paste it into Photo Editor with no loss of quality and
you also have multiple formats to save it as out of Photo Editor. I use
this for Word XP, 2003, and 2007. Hope this helps.
Rick
Hi Everyone, Am I allowed to post a job if my company is looking for a
Contract Technical Writer. Thank you.
Rick
___
You are currently subscribed to framers as arch...@mail-archive.com.
Send list messages to fram...@lists.frameusers.com.
To
Looking for a Sr. Technical Writer who creates, edits, formats, and
project-manages technical documentation including User Guides,
Maintenance Manuals, and Troubleshooting Guides for capital equipment.
The Sr. Technical Writer will take the lead in technical writing,
editing, and proofreading all
Hi Everyone, Am I allowed to post a job if my company is looking for a
Contract Technical Writer. Thank you.
Rick
Looking for a Sr. Technical Writer who creates, edits, formats, and
project-manages technical documentation including User Guides,
Maintenance Manuals, and Troubleshooting Guides for capital equipment.
The Sr. Technical Writer will take the lead in technical writing,
editing, and proofreading all
I could have sworn you could do it, well at least I feel better about
myself lol :-) Thank you for your help Mr. Quatro.
Rick
-Original Message-
From: Rick Quatro [mailto:r...@rickquatro.com]
Sent: Monday, August 02, 2010 5:24 PM
To: Richard Melanson; framers@lists.frameusers.com
I could have sworn you could do it, well at least I feel better about
myself lol :-) Thank you for your help Mr. Quatro.
Rick
-Original Message-
From: Rick Quatro [mailto:r...@rickquatro.com]
Sent: Monday, August 02, 2010 5:24 PM
To: Richard Melanson; framers at lists.frameusers.com
OK Framers,
I now officially consider myself brain dead. I, for the life of me,
cannot remember how to put a page that is 11 x 17 landscape into a
document that is all portrait 8.5 x 11 . I have searched through both
the Frame Help manuals I have and I am still dead in the water, sorry
brain
OK Framers,
I now officially consider myself brain dead. I, for the life of me,
cannot remember how to put a page that is 11 x 17 landscape into a
document that is all portrait 8.5 x 11 . I have searched through both
the Frame Help manuals I have and I am still dead in the water, sorry
brain
Does anyone remember Microsoft Photo Editor. Trying to get photos,
screen captures, any graphic out of Word using everything I have learned
over 16 years being a technical writer never worked. One day I happened
to be on one of the old computers at my home and Microsoft Photo Editor
was installed,
Nice stuff, thanks a million for sharing !!!
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Alan T
Litchfield
Sent: Thursday, July 01, 2010 5:37 PM
To: David Creamer
Cc: framers@lists.frameusers.com
Subject:
Does anyone remember Microsoft Photo Editor. Trying to get photos,
screen captures, any graphic out of Word using everything I have learned
over 16 years being a technical writer never worked. One day I happened
to be on one of the old computers at my home and Microsoft Photo Editor
was installed,
Nice stuff, thanks a million for sharing !!!
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Alan T
Litchfield
Sent: Thursday, July 01, 2010 5:37 PM
To: David Creamer
Cc: framers at lists.frameusers.com
I am running Frame 8 with all patches and Acrobat Pro 8 with all
patches. In the future, we want to do all the things that the Tech Comm
Suite addresses. BUT I get the impression that Tech Comm Suite 2 is not
stable, quirky, maybe buggy. Is it worth it really to get the suite now
or wait a little
I am running Frame 8 with all patches and Acrobat Pro 8 with all
patches. In the future, we want to do all the things that the Tech Comm
Suite addresses. BUT I get the impression that Tech Comm Suite 2 is not
stable, quirky, maybe buggy. Is it worth it really to get the suite now
or wait a little
I, too, am in the process of reviewing if it is worth it to upgrade to
the TCS. I have Framemaker 8. My initial impression is the TCS is not
stable. Thank you everyone for your input.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
I, too, am in the process of reviewing if it is worth it to upgrade to
the TCS. I have Framemaker 8. My initial impression is the TCS is not
stable. Thank you everyone for your input.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at
...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Richard
Melanson
Sent: Tuesday, August 18, 2009 6:31 PM
To: Combs, Richard
Cc: framers@lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Thank you for your input Richard, unfortunately, I am completely
...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Richard
Melanson
Sent: Tuesday, August 18, 2009 6:31 PM
To: Combs, Richard
Cc: framers at lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Thank you for your input Richard, unfortunately, I am completely
Hi Framers,
I have Frame 8 with all the updates/patches running on a WinXp system
with 3gig RAM, 500gig HD, and a 2GHz Core 2 CPU. I have about 55
drawings imported by reference in a single Frame file. When one or more
of the imported by reference drawings changes, Frame gives the option to
.
Rick
-Original Message-
From: David Spreadbury [mailto:dspre...@yahoo.com]
Sent: Tuesday, August 18, 2009 11:59 AM
To: Richard Melanson; 'Combs, Richard'; framers@lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Rick,
The only way that I can see is that something
, 2009 12:36 PM
To: Richard Melanson; David Spreadbury; framers@lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
Thank you for your quick response David. I cant get by the Missing
File
window. I can click on ignore or skip 100 times and Frame just keeps
NOT have the wash as MIF option in the file menu of
Frame. How do I get it?
Rick
From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Tuesday, August 18, 2009 1:32 PM
To: dspre...@yahoo.com; Richard Melanson; richard.co...@polycom.com;
framers
-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Richard
Melanson
Sent: Tuesday, August 18, 2009 2:45 PM
To: Fred Ridder; dspre...@yahoo.com; richard.co...@polycom.com;
framers@lists.frameusers.com
Subject: RE: Import by Reference
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Richard Melanson
Sent: Tuesday, August 18, 2009 3:34 PM
To: Art Campbell; Kelly McDaniel
Cc: framers@lists.frameusers.com; Fei Min Lorente
Subject: RE: Import by Reference Question/Bug ?
I still have my copy of MIF2Go, I just don't know if there were any
:13 PM
To: Richard Melanson
Cc: framers@lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
Boy do I feel stupid :-)
I am trying to open a file to save it as a MIF file to clean out any
impurities that I am unable to open because of the impurities
.
Rick
-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Tuesday, August 18, 2009 6:01 PM
To: Richard Melanson
Cc: framers@lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
I use the import by reference function
Hi Framers,
I have Frame 8 with all the updates/patches running on a WinXp system
with 3gig RAM, 500gig HD, and a 2GHz Core 2 CPU. I have about 55
drawings imported by reference in a single Frame file. When one or more
of the imported by reference drawings changes, Frame gives the option to
.
Rick
-Original Message-
From: David Spreadbury [mailto:dspre...@yahoo.com]
Sent: Tuesday, August 18, 2009 11:59 AM
To: Richard Melanson; 'Combs, Richard'; framers at lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Rick,
The only way that I can see is that something
August 18, 2009 12:36 PM
To: Richard Melanson; David Spreadbury; framers at lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
> Thank you for your quick response David. I cant get by the Missing
File
> window. I can click on ignore or skip 100 time
Anyway, I do NOT have the "wash as MIF" option in the file menu of
Frame. How do I get it?
Rick
From: Fred Ridder [mailto:docu...@hotmail.com]
Sent: Tuesday, August 18, 2009 1:32 PM
To: dspreadb at yahoo.com; Richard Melanson; richard.combs at
ad the trial version and see if that feature works for you.
>
> Fei Min
>
> -Original Message-
> From: framers-bounces at lists.frameusers.com
> [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Richard
> Melanson
> Sent: Tuesday, August 18,
eusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Richard Melanson
Sent: Tuesday, August 18, 2009 3:34 PM
To: Art Campbell; Kelly McDaniel
Cc: framers at lists.frameusers.com; Fei Min Lorente
Subject: RE: Import by Reference Question/Bug ?
I still have my copy of MIF2Go, I just
:13 PM
To: Richard Melanson
Cc: framers at lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
> Boy do I feel stupid :-)
>
> I am trying to open a file to save it as a MIF file to "clean out any
> impurities" that I am
.
Rick
-Original Message-
From: Combs, Richard [mailto:richard.co...@polycom.com]
Sent: Tuesday, August 18, 2009 6:01 PM
To: Richard Melanson
Cc: framers at lists.frameusers.com
Subject: RE: Import by Reference Question/Bug ?
Richard Melanson wrote:
> I use the import by refere
I too have multiple monitors and use Frame and the monitors as Mike has
described below. Best thing since the invention of sliced bread ;-)
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Mike Wickham
Sent:
I too have multiple monitors and use Frame and the monitors as Mike has
described below. Best thing since the invention of sliced bread ;-)
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Mike Wickham
Sent:
You make many very good points, thank you for the perspective Klaus.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Klaus Daube
Sent: Thursday, July 16, 2009 4:48 AM
To: framers@lists.frameusers.com
Subject:
You make many very good points, thank you for the perspective Klaus.
Rick
-Original Message-
From: framers-bounces at lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Klaus Daube
Sent: Thursday, July 16, 2009 4:48 AM
To: framers at lists.frameusers.com
I also have enjoyed reading the thread I started and appreciate
everyone's input, it has helped me to keep a clear head regarding this
issue.
Rick
PS: I am an Electrical Engineer who worked in Engineering, then in a
Product Support and Field Service position before becoming a Technical
Writer, so
I also have enjoyed reading the thread I started and appreciate
everyone's input, it has helped me to keep a "clear head" regarding this
issue.
Rick
PS: I am an Electrical Engineer who worked in Engineering, then in a
Product Support and Field Service position before becoming a Technical
Writer,
I agree !! Great info.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison
Sent: Wednesday, May 20, 2009 3:55 PM
To: framers@lists.frameusers.com
Subject: Re: RE: Esc-m-p to wrap anchored frame
I agree !! Great info.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Nancy Allison
Sent: Wednesday, May 20, 2009 3:55 PM
To: framers at lists.frameusers.com
Subject: Re: RE: Esc-m-p to wrap anchored frame
OUCH ! ;-)
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Robert
Shelton
Sent: Monday, May 18, 2009 2:32 PM
To: Avraham Makeler; framers at lists.frameusers.com
Subject: RE: Procedure How to Write a Manual!
>
First, thank you Everyone, you guys always have the answers to
questions, even when I don't post questions :-)
I just want to share this with the list and absorb the response. My boss
today told me to write a procedure on how to write a manual and he
also stated to me that anyone could be a
First, thank you Everyone, you guys always have the answers to
questions, even when I don't post questions :-)
I just want to share this with the list and absorb the response. My boss
today told me to "write a procedure on how to write a manual" and he
also stated to me that anyone could be a
If the client is merely trying to save money by using a free tool,
we'll *give* her a copy of Mif2Go. Nobody should have to go through
that process to keep a job...
This is what makes America great! Bravo!
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
"If the client is merely trying to save money by using a "free" tool,
we'll *give* her a copy of Mif2Go. Nobody should have to go through
that process to keep a job..."
This is what makes America great! Bravo!
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
I would like to politely disagree. I have a Certificate from
Northeastern U. in Boston and it has served me very well. I am fortunate
enough to have a strong technical background so maybe that is why the
Certificate has been more than enough for me when job hunting. I have
included some links
I would like to politely disagree. I have a Certificate from
Northeastern U. in Boston and it has served me very well. I am fortunate
enough to have a strong technical background so maybe that is why the
Certificate has been more than enough for me when job hunting. I have
included some links
Great info Jim, thank you. I am looking at 9 and your post has helped me
out.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Pinkham, Jim
Sent: Wednesday, March 25, 2009 3:43 PM
To: Art Campbell; Pat
Great info Jim, thank you. I am looking at 9 and your post has helped me
out.
Rick
-Original Message-
From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Pinkham, Jim
Sent: Wednesday, March 25, 2009 3:43 PM
To: Art Campbell; Pat
I posted this yesterday and was just wondering if anyone received it,
thank you.
Hello Framers,
I have spent the last couples of hours trying to find an answer to this
question. I am importing by reference TIFFs into a Framemaker 8 file.
The TIFFs are a single file with multiple pages, but
on my network.
Rick
-Original Message-
From: Alan Litchfield [mailto:a...@alphabyte.co.nz]
Sent: Monday, January 26, 2009 4:04 PM
To: Art Campbell
Cc: Richard Melanson; framers@lists.frameusers.com
Subject: Re: Importing Multi Page Tiffs, How ??
Multi-page tiffs are pretty common really.
I
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Alan
Litchfield
Sent: Monday, January 26, 2009 1:04 PM
To: Art Campbell
Cc: framers@lists.frameusers.com; Richard Melanson
Subject: Re: Importing Multi Page Tiffs, How ??
Multi-page tiffs are pretty common really.
I remember replying to this, so I
on my network.
Rick
-Original Message-
From: Alan Litchfield [mailto:a...@alphabyte.co.nz]
Sent: Monday, January 26, 2009 4:04 PM
To: Art Campbell
Cc: Richard Melanson; framers at lists.frameusers.com
Subject: Re: Importing Multi Page Tiffs, How ??
Multi-page tiffs are pretty common really
.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Alan
Litchfield
Sent: Monday, January 26, 2009 1:04 PM
To: Art Campbell
Cc: framers at lists.frameusers.com; Richard Melanson
Subject: Re: Importing Multi Page Tiffs, How ??
Multi-page tiffs are pretty common really.
I remember repl
I posted this yesterday and was just wondering if anyone received it,
thank you.
Hello Framers,
I have spent the last couples of hours trying to find an answer to this
question. I am importing by reference TIFFs into a Framemaker 8 file.
The TIFFs are a single file with multiple pages, but
92 matches
Mail list logo
