built resulting in a
useless apache installation.
So, I believe there is more to do here than just performance
optimisation.
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman
is just a better version of the ata(4) driver...
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current
On Fri, Apr 23, 2010 at 09:40:59AM +0300, Andriy Gapon wrote:
on 23/04/2010 07:48 Szilveszter Adam said the following:
There is one interesting tidbit though: previously it used to be
possible to run cdda2wav also as non-root, provided the user running it
had read access to the /dev/cd0
running it
had read access to the /dev/cd0 device. This seems to no longer work.
Has anybody else noticed this?
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
to be the make release target...
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
also be defined on the command line. For documentation on these and on
the Makefile format for ports, see the Porters Handbook.
There is also pkgtools.conf, as has been noted.
Hope this helps.
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
[EMAIL
this operation is rather complicated. The section
is titled To upgrade in-place from 4.x-stable to current. It is not
late to read it even now. There are a few things worth noting in there.
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
[EMAIL PROTECTED] mailing
Hello,
On Fri, Aug 22, 2003 at 11:30:45AM -0400, Matt Gostick wrote:
On Wed, 2003-08-20 at 17:04, Szilveszter Adam wrote:
What does 'cat /dev/sndstat' say?
# cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: SB16 DSP 4.16 (ViBRA16X) at io 0x220 irq 7 drq 0 bufsz
can safely skip this section. These versions use devfs(5)
to allocate device nodes transparently for the user
You do not need this, devfs will create the device for you when needed.
--
Regards:
Szilveszter ADAM
Budapest
Hungary
___
[EMAIL PROTECTED
to build X, but tweaked the config to use the expat, the
freetype2 and libxml2 from the system (ports) instead of the packaged
ones that are in the X repo.
Additional info is available on request, including details of my build
environment.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
On Tue, Dec 31, 2002 at 11:51:34AM +0100, Frode Nordahl wrote:
On Tue, 2002-12-31 at 11:30, Szilveszter Adam wrote:
Hmmm. I have the same version of X as you (roughly, the tag was already
in place by the time I built although I always use HEAD, I built on 23rd
December) and FreeBSD is from
: I often need a symlink /dev/cdrom to /dev/cd0. What's the
best way to do this...
In rc.devfs, put this:
ln -s /dev/cdrom /dev/cd0.
Easy enough:-)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
Fine(TM): for example I use them to give my
users a Hungarian-locale environment independent of the shell they use.
This has been in use for months (if not years) and has always worked
(also through ssh). This must be something else.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
/include is also repopulated with the
new headers)
- mergemaster (with the new mergemaster script)
- reboot for the changes to take effect.
Done.
Hope this helps.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current
On Tue, Aug 13, 2002 at 01:43:44PM -0600, Kyle Butt wrote:
Szilveszter Adam wrote:
(At this point you are running on the -CURRENT kernel but with the old
userland: be aware of this because things like ipfw will now stop
working until you are back in sync!)
The trick here is that a new
On Mon, Aug 12, 2002 at 12:41:19PM -0700, David O'Brien wrote:
On Sun, Aug 11, 2002 at 09:41:19PM +0200, Szilveszter Adam wrote:
This is known problem, straight updates by simply make world do not
work from -STABLE. Therefore, one has to very carefully follow the
procedure described
of this situatio, the person(s) affected should do a make -k
installworld now and then a make installworld again anf this way get
all the new userland installed.
Also, one should not use the -j when upgrading (as stated in UPDATING)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe
still have no real explanation for your hanging of the machine.
Perhaps someone else. The first failure is memory corruption in any
event but the reason is not known to me. I have not seen it reported
here yet.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL
On Mon, Jul 29, 2002 at 02:44:50PM +0200, Sheldon Hearn wrote:
On (2002/07/28 09:49), Szilveszter Adam wrote:
is firewall support built into the -current kernel or does it need to be
compiled in?
It is not in GENERIC, but you can always either compile it in, or load
it from
that I compiled the jdk with the new patchset just
yesterday on my week-old -CURRENT and it worked ok.
However, I always clean out /usr/include before installworld, so there
may be no stale header files there.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL
:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
, with the
bandaid fix to pmap.c, and that one did not lock up under X, at least
not during my testing.
So, yes, I am seeing unstability, but only under X.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
anyway, thanks for fixing this, and anybody who used the
DISABLE_PG_G workaround can now switch that off.
Happy hacking!
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
PnP
SB 64 AWE sound, S3 Virge GX2 AGP video card, just in case. No SCSI.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
. This suggests a remote possibility that there
might be a problem with this option, so this is the next thing that I am
going to test.
We'll see...
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
On Wed, Jul 17, 2002 at 07:38:22PM +0200, Szilveszter Adam wrote:
Bakul mentioned that the panic happens on a PPro. For me, it's a PII. I
am using a CPUTYPE setting of p2 in /etc/make.conf. This gets
converted to a -march=pentiumpro on the actual compile line. This may
be the same
of (non-DDR) SDRAM. (2x64)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
not help
much...
I will be just too glad to offer any information or testing that may be
needed.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On Sun, Jul 14, 2002 at 07:49:57PM +0200, Szilveszter Adam wrote:
Hello everybody,
I have recently finished to upgrade my system to today morning's
-CURRENT, with sources just *before* the commit of rev 1.154 to
src/sys/kern/kern_fork.c by Julian.
I have an UP IA32 machine, I am
On Sun, Jul 14, 2002 at 08:06:49PM +0200, Szilveszter Adam wrote:
On Sun, Jul 14, 2002 at 07:49:57PM +0200, Szilveszter Adam wrote:
Hello everybody,
I have recently finished to upgrade my system to today morning's
-CURRENT, with sources just *before* the commit of rev 1.154 to
src/sys
this helps.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
Hello,
You were not, by any chance, using the -nat option with ppp? If you
were, and have a recent -CURRENT with the new ipfw code, then *that*
will make ppp dump core with a sig10 just fine. (Same behaviour as with
natd)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send
-p always says: 0.0 % fragmentation for all my
filesystems.
Like this:
/dev/ad1s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad1s1a: clean, 1016302 free (14 frags, 0 blocks, 0.0%
fragmentation)
Anyone else seen this?
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail
and recompiling libalias and natd fixes the
natd breakage for me. However, I was seeing some possible side effect of
this (see my earlier mail about deny rules not working in ipfw) but I am
not sure since I have at least one other report of this.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
file,
ipfw prints two lines for each, one with the expected rule number and
one with all zeros. I don't know if it's significant though.
It is like this:
0 deny log ip from any to any
03600 deny log ip from any to any
This did not happen previously...
--
Regards:
Szilveszter ADAM
of humour. (And yes, maybe I really should get another
graphics card... the S3 Virge GX2 may also take part of the blame for
the lockups...)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
all the way, you can change the name of
inc-hist.texi.diff to inc-hist.texinfo.diff, but that involves a repo
copy.
Have a good weekend!
--
Regards:
Szilveszter ADAM
Szombathely Hungary
Index: Makefile
===
RCS file: /usr/home/cc
Grrr, hit me baby one more time.
One of the diffs included a completely gratuitous one-line change which
I made yesterday night while I was tired and neglected to correct today.
So, the patchset again. (Take three!)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
Index: Makefile
by David.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On Fri, Jun 28, 2002 at 05:49:33PM +0200, Szilveszter Adam wrote:
Hello Sheldon,
As far as I know, so far only the ones for GDB (and that only under
-CURRENT). If you get there first, go for it, but if not, I will also
look at the issue during the weekend.
To follow up on this: I have got
solved.
Thanks to all who responded.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
that's my opinion.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
does not mean that the build was
successful. In this case it tries to finish it up at install time, of
course failing again, but this time the failure is fatal.
It's just a build config thing, if you just use a 'make all' you will see the
errors one-by-one.
--
Regards:
Szilveszter ADAM
because of
I just took a larger hammer and just turned off docs.
FWIW, I solved the problem by reanimating remote.texi from the Attic, to
where it was relegated with the message that it did not make it into GDB
5.0. But of course it needs sorting out.
--
Regards:
Szilveszter ADAM
Szombathely
with the use of rm(1).
If you need any more info, just ask.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
part of XFree that is
wirtten in C++. If I specify -lstdc++ on the link line of any programs
that use libGLU, it works (see xc/programs/glxinfo).
My -CURRENT is from Saturday (8th), NO_CXX is *not* set.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL
only be used for use.perl port, for
the cases where the wrapper does not work as desired.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On Wed, May 22, 2002 at 11:16:11AM +0200, Georg-W. Koltermann wrote:
Am Di, 2002-05-21 um 21.35 schrieb Szilveszter Adam:
Yes, this is correct. THe libraries libstdc++v3 and libsupc++v3 are not
built for the system compiler. You can, however, use ports/lang/gcc31.
Ok that works
Mozilla, and it
works. (I even tried letting CC be the system cc and redefining CXX to
the ports version and this worked too, Moz is happily chugging along
except when X freezes on me, which is unrelated, I have a Virge GX2
card -- known problem with X.)
--
Regards:
Szilveszter ADAM
Szombathely
that the existing infrastructure of
bsd.doc.mk should be used and the custom targets be deleted. For 17.m4, the
problem is more serious, the sU macro does not seem to exist in the
FreeBSD base system just for now, so should be imported first.
Just an FYI.
--
Regards:
Szilveszter ADAM
Szombathely
).
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
are quickly becoming commonplace in modern
PCs, and I was hoping that dd mode would not be *the* way to use them
under FreeBSD:-).
And Terry and Poul-Henning, please stop fighting, I am not going to do
anything to the system wrt this just now:-)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
.
There is only so much one can deduce from the code, it is the author who
should know what was intended here.
This breaks the world.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
5.0 hits
the streets.
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
?
(I have not played with PAM config, I use the defaults)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
, yesterday it was done in 2 mins? In the
next moment I heard the sound of my jaw slamming onto my desk...:-)
Keep up the good work!
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
idea.
Fortune(6), anyone?:-)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
that the licensing
suits you.
And yes, acronym overload is rampant:-) probably because namespace
pollution is a common problem in programming:-)
--
Regards:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
:
Szilveszter ADAM
Szombathely Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
, but we do not use it for
this purpose.
Just my HUF 0.02 and the heat...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
.
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
, and since
that's what I use, maybe that's why I never noticed this...
What is the date of your current world?
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
have also forgotten
how to do such mounts on occasion before:-)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On Tue, Jun 12, 2001 at 01:01:02PM +0400, Andrey A. Chernov wrote:
On Tue, Jun 12, 2001 at 10:47:43 +0200, Szilveszter Adam wrote:
In your situation I would try ad0s5 and onwards. If you do not have the
device node under /dev, so create it:-) (No worries I have also forgotten
how to do
Hello Greg and others,
Well I cannot find that file (/usr/src/sys/dev/vinum/vinumutil.h) there, it
is not there in the cvsweb interface either. However, I can confirm that
/usr/src/sys/dev/vinum/vinumhdr.h
contains a reference to it.
So?
--
regards:
Szilveszter ADAM
Szeged University
Hello Alfred, hello everybody,
On Sat, May 19, 2001 at 10:08:25PM -0400, Alfred Perlstein wrote:
* Alfred Perlstein [EMAIL PROTECTED] [010519 21:57] wrote:
* Szilveszter Adam [EMAIL PROTECTED] [010519 16:53] wrote:
Hello everybody,
I guess I was just being too happy so it had to get
vm_fault1
vm_fault
trap_pfault
trap
calltrap
and again the same trap message like above.
After hitting 'c', it freezes at the dumping: resetting devices part.
This starts to become interesting... will follow up with more when found.
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
.
Luckily, console based CD players also exist.grin
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
dump.
Ideas?
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
than you can build
say a -STABLE release on a -CURRENT box... )
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
), it took heavy
amounts of tinkering to get things going... the make world succeeded
though, so I assume that most anything would have gone well from that
point... in any case, if you want to do a release, study the Makefiles
closely and understand what they do.
--
Regards:
Szilveszter ADAM
Szeged
and olvwm if that at all counts... of course I am happy
to see no problems but why are others seeing them?
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
with XFree4 if you want just install the
wrapper script from /usr/ports/x11/wrapper. I did this on a friend's
machine and it works:-)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
the
help of a collegaue with it. (who will kindly reboot the machine on the
other end into FreeBSD-STABLE:-) Note that I do not have a known_hosts2 or
an authorized_keys2 file anywhere.
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED
in sync, machine UP PII-233.
Nessus is from ports and has been extra recompiled after the make world.
I will try anything if needed or test any patches...
Thank you for your time...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED
info let me know.
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
machine! - No, ...
It would serve those people well who were only educated about UNIX-type
systems during MS vs anything else flamewars...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body
/perl/../../../../contrib/perl5/configpm line 430.
*** Error code 255
Hello,
You need the patch from the message:
[EMAIL PROTECTED]
by markm. Apply it to the /usr/libdata/perl/BSDPAN dir. Not to the sources,
the installed version, because it is faulty.
--
Regards:
Szilveszter ADAM
Szeged
Hello,
When was this megapatch? I have a kernel world from evening of 18th CEST,
and my SB 64 AWE rocks as usual. I even figured out, how to play Shoutcast
streams with mpg123 which enabled me to listen to my favourite radio on the
console:-) Doing it right now:-)
--
Regards:
Szilveszter
. (The shell that is)
Try to upgrade and see if it goes away:-)
Good luck!
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
the partitons on ad0 were checked, but the ad1 was not.
Yet, it was mounted r/w afterwards.
I did not yet test in single-user mode though what if I say 'fsck -p'...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubs
ual, apart from the fact that ad1 is not even
mentioned. If I after this say 'fsck -d -p /dev/ad1s1a', it says:
start /dev/ad1s1a wait fsck_ufs -p /dev/ad1s1a
and then exits, seemingly succesfully.
Nothin more... if there is anything I can be helpful with, please tell me.
--
Regards:
Szilve
...
after putting the correct values in there, fsck worked.
But I have no idea how/why the numbers got deleted... and then why it
worked before?
Thanks all the same, things seem to work out A OK right now.
:-)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail
em if your previous
shutdown was clean... am I right? Or maybe there is a problem with shutdown
too that fsck simply doesn't notice? Brrr...:-)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-curre
the fix.
I can confirm that this fixes the problem (as in the kernel builds and
boots with options midi and sequencer.)
Thanks!
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" i
+0x9a
isa_probe_children(c0ea2980,c04e6ff8,c01b1f74,0,4e4c00) at
isa_probe_children+0x143
configure(0,4e4c00,4e4000,0,c01277d2) at configure+0x39
mi_startup() at mi_startup+0x68
begin() at begin+0x29
Yes, I think we are looking at the same thing.
--
Regards:
Szilveszter ADAM
Szeged University
corruption occurs
because the panic is so early on boot.:-)
Of course, as soon as I omit the midi part, the kernel boots fine, and the
sound card works too.
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-cu
more responsive than it has been lately. Congrats to
Mark and all, I just did not want to send an email separately for this!:-)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" i
... if this is not the problem, I dunno, I did not have any such
problems even though I have just finished a buildworld...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
.)
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
On Sat, Feb 17, 2001 at 02:09:39PM +0100, Szilveszter Adam wrote:
On Sat, Feb 17, 2001 at 01:54:29PM +0100, Martin Blapp wrote:
Do people test their changes ?
warning: passing arg 1 of `unshare_all_rtl' from incompatible pointer type
... /usr/current/src/gnu/usr.bin/cc/cc_int
t may be the problem... but I do not know of a good solution
other than grabbing a known good as (or also libc) from somewhere, like a
snapshot on ftp...
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe fre
.0-CURRENT FreeBSD 5.0-CURRENT #8: Sat Feb
17 16:
09:13 CET 2001 [EMAIL PROTECTED]:/usr/src/sys/compile/FONIX
i386
Wish you best of luck!
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-curre
!
--
Regards:
Szilveszter ADAM
Szeged University
Szeged Hungary
hungarian.tar.gz
On Sat, Feb 17, 2001 at 05:07:06PM +0100, Szilveszter Adam wrote:
Hello everybody!
Today I upgraded my system to the latest -CURRENT and in the process also
completed the Hungarian locale support.
Please find enclosed the small tar.gz archive with the necessary files in
src/share/{msgdef
On Sat, Feb 17, 2001 at 05:24:29PM +0100, Szilveszter Adam wrote:
Where, of course, I couldn't be bothered to send the Makefile diffs
along... doh!:-)
Here they are...
...
Please, ignore the previous junk... sigh. I should know better than
synching my CVS repo *after* building and *before
1 - 100 of 154 matches
Mail list logo
