Hi People,
I've tried to set up the sound card on my machine but unsuccessfully
:-(
I'm running FreeBSD 5.0. The MB is Abit NF7-S based on nForce2
chipset. The sound card is on board: AC 97 CODEC on board
I've compiled the KERNEL with device pcm in order to get the audio
Hi all,
I was wondering if anyone can tell me about their experience of Vinum and
its performance on RAID5 systems? I've built a vinum-raid of 4 160Gb disks
that each do a dd if=/dev/zero of=/dev/adNd of about 60Mb/sec. However,
when I've set up my raid, performance drops to 6Mb/sec, and with only
--- [EMAIL PROTECTED] wrote:
Hello Tiarnan,
Thanks for your input. I had already turned off the PNPBIOS option.
I tried your
suggestion of recompiling with:
options PCI_ENABLE_IO_MODES
Judging by dmesg, it made no difference. It also did not allow any
of the software to
hi:
when i tried to use the command mount -t msdos /dev/fd0 /floppy to mount
the floppy,
the system showed block devices reqired.i went to /dev,and found that
there is no
device /fd0,but a directory /dev/fd with three files named 0,1,and 2 in
it.also,in the
file /etc/fstab,i couldn`t see the
Fdisk (using /stand/sysinstall) disagrees with the values my bios is
reporting. My BIOS reports that my 120GB drive has this geometry: 59131
Cylendars, 16 Heads, and 255 sectors. The drive is an IBM deskstar. When i
try to enter the correct geometry, Fdisk gives me the message below.
On Tuesday, 19 August 2003 at 9:56:13 +0200, Niklas Saers Mailinglistaccount wrote:
Hi all,
I was wondering if anyone can tell me about their experience of Vinum and
its performance on RAID5 systems? I've built a vinum-raid of 4 160Gb disks
that each do a dd if=/dev/zero of=/dev/adNd of about
--On 19 August 2003 02:20 -0700 Jonas [EMAIL PROTECTED] wrote:
Sorry for the novice question.
I have connected the console port on a Cisco router to COM1 on my fbsd
box.
Which program on the fbsd can I use to access the router?
Does the COM port need to be mounted and how do I set the speed?
for that MS-DOS feeling try minicom
--On 19 August 2003 02:20 -0700 Jonas [EMAIL PROTECTED] wrote:
Sorry for the novice question.
I have connected the console port on a Cisco router to COM1 on my fbsd
box.
Which program on the fbsd can I use to access the router?
Does the COM port need to be
Im trying to install Staroffice 6 on my FreeBSD system, however I get this
error when I run make install clean
# make install clean
Check if linprocfs is running: YES
Check if /compat/linux/etc/mtab exists: YES
If you like to install staroffice with ADABAS database support,
cancel this
On Tue, 19 Aug 2003 17:56, zd wrote:
hi:
when i tried to use the command mount -t msdos /dev/fd0 /floppy to mount
the floppy,
the system showed block devices reqired.i went to /dev,and found that
there is no
device /fd0,but a directory /dev/fd with three files named 0,1,and 2 in
/dev/fd
Charles Howse wrote:
Packages are nice for the speed you can install them with,
but can be much
harder to deal with the dependencies unless you use something like
portupgrade (which is much more useful after you've got what you want
installed and want to keep it all up to date).
Well,
At 11:53 AM 8.19.2003 +0400, Varshavchick Alexander wrote:
Hi,
Can anybody advise me please if I want to increase nmbclusters option in
kernel, can I just type
sysctl kern.ipc.nmbclusters=16384
without rebooting the server, or is the only way to set the NMBCLUSTERS
option in kernel,
On Tue, 19 Aug 2003, Jack L. Stone wrote:
You can modify those on fly without a reboot with:
sysctl kern.nmbclusters=n (n being the number of choice)
No, it doesn't work:
sysctl: oid 'kern.ipc.nmbclusters' is read only
You can then put the statements in the /boot/loader.conf and will
On Tue, Aug 19, 2003 at 11:53:57AM +0400, Varshavchick Alexander wrote:
Hi,
Can anybody advise me please if I want to increase nmbclusters option in
kernel, can I just type
sysctl kern.ipc.nmbclusters=16384
without rebooting the server, or is the only way to set the NMBCLUSTERS
On Sun, Aug 17, 2003 at 10:23:53PM +, kristof wrote:
Hi,
I'm trying to get mldonkey working but I don't really know what I'm doing wrong.
Fisrt I got the error of no servers in servers.ini but was able to solve this by
copying the servers.ini in the ../distrib dir over the other ones.
On Tue, 19 Aug 2003, Alex de Kruijff wrote:
Can anybody advise me please if I want to increase nmbclusters option in
kernel, can I just type
sysctl kern.ipc.nmbclusters=16384
without rebooting the server, or is the only way to set the NMBCLUSTERS
option in kernel, install the new
Fdisk (using /stand/sysinstall) disagrees with the values my bios is
reporting. My BIOS reports that my 120GB drive has this geometry: 59131
Cylendars, 16 Heads, and 255 sectors. The drive is an IBM deskstar. When i
try to enter the correct geometry, Fdisk gives me the message below.
I'm trying to run the htpasswd utility with Apache and I'm getting an
error: Command not found.
I'm new to UNIX and not sure what I can do to resolve this.
It is not in your path. You need to figure out where you installed it
and then either use a full path when you call it (eg something
There are two files in
/usr/obj/usr/src/sys/DEBUG/modules/usr/src/sys/modules/vinum
One is vinum.ko and the other is vinum.ko.debug (Both are not stripped)
I have tried the gdb dump with vinum.paths pointing to either one
of them and it still gives the error mentioned below (Attempt to
I have a SND Blaster 16 in my computer. I was using FreeBSD 4.8 and
'device pcm' in my kernel config file, worked great. I've completely
re-installed with 5.1R and recompiled my kernel with 'device pcm'.
Unfortunately sound doesn't work.
I no longer have a /dev/snd0 device... how do I make
Does any one know where to find the arp cache? Mine keeps telling me it needs flushed.
Where is it? HELP
Belinda mock
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
On Tue, 19 Aug 2003, Belinda wrote:
Does any one know where to find the arp cache? Mine keeps telling me it needs
flushed. Where is it? HELP
To flush the ARP cache:
arp -d -a
(must be done as root)
Marc.
--
Marc Ramirez
Blue Circle Software Corporation
513-688-1070 (main)
513-382-1270
Hi list, I'm getting a problem with my DNS, I'm running 4.7 + named, the
config files are teorically well, but when I tried to get access from
outside (of the network) to my ftp site, no returns records, when I tried
with the real IP, everything's fine, any suggestion...???
Hi,
You just sent an email to my [EMAIL PROTECTED] account, which
is now being managed by my Mailblocks spam-free email service. Because this
is the first time you have sent to this email account, please confirm yourself
so you'll be recognized when you send to me in the future.
It's simple.
On Tue, 19 Aug 2003 22:56, you wrote:
hello,Malcolm
yeah,by examining the process of the system`s booting,two concerned
messages as below were found :
fdc0:cannot reserve i/0 port rang(6 ports)
fdc0:cmd 3 failed at out byte 1 of 3
what does it mean?resources conflict?
Probably; I am no
Has anyone besides me been receiving a flood of infected emails?
All the emails have the same subject lines:
Thank you!
RE: That movie
RE: RE: My Details
RE: RE: My Details
RE: Details
RE: Wicked Screensaver
RE: Approved
RE: Your application
But are from different users.
I am also getting Mail
Hi,
Fdisk (using /stand/sysinstall) disagrees with the values my bios is
reporting. My BIOS reports that my 120GB drive has this geometry: 59131
Cylendars, 16 Heads, and 255 sectors. The drive is an IBM deskstar. When i
try to enter the correct geometry, Fdisk gives me the message below.
Has anyone besides me been receiving a flood of infected emails?
I am flooded too. From 8:00AM (EST) till now (11:40AM) I received almost 120
of these emails. I am using Norton Antivirus 2003. The attachments were
purged automatically. According to
Anyone has used any data recovery company they could recommend?
It's a UFS HD with softupdates.
Its the data disk of a FreeBSD 4.7 machine.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
Hello all!
I'm setting up a POP3/SMTP server (going to use qpopper/sendmail) for my
community computer access center and i have little experience setting up a
pop3 server (i have more experience setting up a private smtp relay server).
My primary question is how can i set up user accounts
Charles, all -
On Tue, 19 Aug 2003, Charles Howse wrote:
Has anyone besides me been receiving a flood of infected emails?
All the emails have the same subject lines:
Thank you!
RE: That movie
RE: RE: My Details
RE: RE: My Details
RE: Details
RE: Wicked Screensaver
RE: Approved
RE:
Charles Howse wrote:
Has anyone besides me been receiving a flood of infected emails?
All the emails have the same subject lines:
Thank you!
RE: That movie
RE: RE: My Details
RE: RE: My Details
RE: Details
RE: Wicked Screensaver
RE: Approved
RE: Your application
But are from different users.
On Tuesday 19 August 2003 02:21 am, Vlado Korcek wrote:
Hi People,
I've tried to set up the sound card on my machine but
unsuccessfully
:-(
I'm running FreeBSD 5.0. The MB is Abit NF7-S based on nForce2
chipset. The sound card is on board: AC 97 CODEC on board
I've
Try Kermit--very flexible and powerful. Get it from
/usr/ports/comms/kermit. Docs are at www.columbia.edu/kermit.
Karl Pielorz wrote:
--On 19 August 2003 02:20 -0700 Jonas [EMAIL PROTECTED] wrote:
Sorry for the novice question.
I have connected the console port on a Cisco router to COM1 on
same here - all from rr.com and all .pif files
On Tue, 19 Aug 2003, Matt Heath wrote:
Charles Howse wrote:
Has anyone besides me been receiving a flood of infected emails?
All the emails have the same subject lines:
Thank you!
RE: That movie
RE: RE: My Details
RE: RE: My Details
Hi,
Fdisk (using /stand/sysinstall) disagrees with the values my bios is
reporting. My BIOS reports that my 120GB drive has this geometry: 59131
Cylendars, 16 Heads, and 255 sectors. The drive is an IBM deskstar. When i
try to enter the correct geometry, Fdisk gives me the message below.
Has anyone besides me been receiving a flood of infected emails?
All the emails have the same subject lines:
Thank you!
RE: That movie
RE: RE: My Details
RE: RE: My Details
RE: Details
RE: Wicked Screensaver
RE: Approved
RE: Your application
But are from different
On Tue, Aug 19, 2003, Rod Person wrote:
On Tue, 19 Aug 2003 11:12:47 +0530
Gautham Ganapathy [EMAIL PROTECTED] wrote:
Hi
The FreeBSD mailing lists also seem to be available in yahoo groups.
Are these mirrors of the ones at freebsd.org? If I join a groups and
post a message there, will it
On Tuesday 19 August 2003 10:45, yo _ wrote:
I'm setting up a POP3/SMTP server (going to use qpopper/sendmail) for my
community computer access center and i have little experience setting up a
pop3 server (i have more experience setting up a private smtp relay
server).
My primary question is
Here is the virus description from TrendMicro Labs :
We decide to declare a YELLOW ALERT on the malware WORM_SOBIG.F, due to several
infection over the world.
For reminder here is the short Virus Description:
This worm propagates by mass-mailing copies of itself using its own Simple Mail
Hi !
I've been looking for a week on finding a good centralized authentication
system that could work with most of services authentication (for ftp, http,
mail, shell access...).
After some reading and trying, I came to the conclusion that openldap was what
I was looking for.
Now, I know I
On Tue, 2003-08-19 at 18:13, Siegbert Baude wrote:
I remember, that I had
the same problem with an Samsung SV1204H (also 120GB) and an Abit-BX133.
I had to manually insert the correct numbers there. The disk reports
232632/16/63, but due to a small bug in the BIOS, I couldn't choose a
Has anyone besides me been receiving a flood of infected emails?
could it be that the blaster patch opens up the sobig vector?
I think my address is being used for parts of a flood of virus or spam
mail. It seems plausible the harvesting was done from 'freebsd-questions'.
all mine
I have two systems. One system is version 4.0 and the other 4.8S.
I took the drive out of the 4.8 machine and mounted the slices with
the 4.0 machine. After the initial mount, which worked, I got
errors on subsequent mount attempts.
It actually puts the 4.0 machine into panic whenever I try now.
I'm trying to install gonvert from the ports tree, on a machine that was
cvsup'd a week or 2 ago.
I get a message about it conflicting with py-gtk, but when I try to use
pkg_delete to remove that I get that it is required by gnome-1.4, and
py-gnome.
What can I do, so that I can use gonve?
--
On Tuesday 19 August 2003 11:43 am, Matt Heath wrote:
Has anyone besides me been receiving a flood of infected emails?
could it be that the blaster patch opens up the sobig vector?
Wouldn't that just be a kick!
I think my address is being used for parts of a flood of virus or spam
mail. It
Hello,
This is an auto-response. You recently sent an e-mail to [EMAIL PROTECTED] , probably
in reply to a bulk e-mail from an admin, or a notification. Replying to that message
did not get you to the person who you wished to contact. If you were trying to reply
to the e-mail (from another
On Tuesday 19 August 2003 12:10 pm, [EMAIL PROTECTED] wrote:
Hello,
This is an auto-response. You recently sent an e-mail to [EMAIL PROTECTED]
, probably in reply to a bulk e-mail from an admin, or a notification.
Replying to that message did not get you to the person who you wished to
On 08/19/03 11:59 AM, Chris sat at the `puter and typed:
On Tuesday 19 August 2003 11:43 am, Matt Heath wrote:
Has anyone besides me been receiving a flood of infected emails?
could it be that the blaster patch opens up the sobig vector?
Wouldn't that just be a kick!
No, it'd just be
On Tue, Aug 19, 2003 at 01:41:49AM -0700 or thereabouts, Dan Strick wrote:
How does one erase a FreeBSD disk (slice) label?
[ ... ]
Boot MS Windows and FORMAT the slice?
Wouldn't work; FORMAT is braindead.
Disable the code in /sys/kern/subr_diskslice.c that protects
disk labels and
On Tue, 19 Aug 2003, Jonas wrote:
I have connected the console port on a Cisco router to COM1 on my fbsd
box.
Which program on the fbsd can I use to access the router?
Does the COM port need to be mounted and how do I set the speed?
tip com1 works fine for console access.
man tip will
On Tue, 19 Aug 2003, Chris wrote:
On Tuesday 19 August 2003 11:43 am, Matt Heath wrote:
Has anyone besides me been receiving a flood of infected emails?
could it be that the blaster patch opens up the sobig vector?
Wouldn't that just be a kick!
It appears different... but who knows.
When I try to print something with cups it tells me
kernel: ulpt0: output error
I have an Epson Stylus Color 880. I tried switching the device from ulpt0 to unlpt0
but that did not seem to change much. Has anyone had a similar problem?
Mike Atamas
[EMAIL PROTECTED]
man brandelf
On Tue, 19 Aug 2003, Yusuf UZUNAY wrote:
Hi!
when i was trying to run a linux program in FreeBSD i
take an error like ELF file ABI version invalid! Ýs
there anyone who has got some idea about this error?
Thanks!
-yusuf
__
Do you Yahoo!?
I receive the following error just before root is mounted.
RTC BIOS diagnostic error 18memory_size,fixed_disk
It looks to me like the kernel does not like the info the BIOS is
telling it about my hard drive.
I'm not experiencing any disk problems, so is this something I should
try to fix?
I'm also
I want to setup a firewall (ipfw) on my freebsd 4.8 p3 server. The
machine runs web, ftp, ssh, dns, smtp, and imap to the outside world.
Does anyone have any links to example rules for servers? (I've already
looked at the handbook and man file)
My problem lies in UDP rules. I think I have
At 7:00 AM this morning, I began to re-install 4.8-RELEASE.
Installed as usual, removed unnecessary drivers, FTP from default site,
installed cvsup-without-gui and portupgrade from packages.
After installation finished, I configured my /etc/cvsupfile and cvsup'ed
src-all, ports, and docs.
I
Hi all,
I receive the following error when running Pervasive.SQL for linux
(www.pervasive.com) on FreeBSD 4.8-STABLE with both linux_base_6.1 and
linux_base_7_1 and linux_base_7_4.
linux: 'ipc' typ=17 not implemented
snip
SQLManager is being started in console mode, intended for debugging
It seems like the install hangs on the probing of the next hardware,
whatever that is. I tried to install without any harddrives connected, and
it hung after the line that was previously before the HD probe.
How could I get to know what part hangs the install? What comes (usually?)
after the HD
Hi,
I have natd running on an old 486 in my flat, which has two ISA
network cards, one connecting me to a nearby building, and, that puts me
online, however, I have a problem.
ed2: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
inet6 fe80::200:21ff:fe20:f11%ed2 prefixlen 64
You may want to try and lower the UDMA to 33 or 66 or something.
I've had the same thing with a 80GB UDMA100 drive where the installation
constantly froze when trying to run sysinstall. The only way we could get
it to work was to lower the UDMA to 33.
--
me
- Original Message -
On Tue, Aug 19, 2003 at 02:31:55PM -0400, Lucas Holt wrote:
I want to setup a firewall (ipfw) on my freebsd 4.8 p3 server. The
machine runs web, ftp, ssh, dns, smtp, and imap to the outside world.
Does anyone have any links to example rules for servers? (I've already
looked at the
Dear Compaq Customer,
Thank you for choosing HP Americas Consumer eSupport for Compaq
Products. This is an automated response to let you know that we have
received your inquiry.
For the fastest path to accurate answers, your email request will be
directed to a qualified Compaq Support
In the programs /bin directory there is aaad and
aaa.out files
normally
# aaad -start
initialize the daemon!
At this point this error occurs
aaa.out: error while loading shared libraries:
/lib/libaaa.so.2: ELF file ABI version invalid
I entered /lib directory and gave this command(as you
say)
Prev trace was not using kernel.debug, I found kernel.debug
file that matched the running kernel and here is the trace
with it (no errors from gdb now).
BTW, I will be moving back to 4.8+vinum tonight
ettukaali# gdb -k kernel.debug vmcore.0
GNU gdb 5.2.1 (FreeBSD)
Copyright 2002 Free Software
Haha
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Compaq Consumer
Support
Sent: Tuesday, August 19, 2003 12:40 PM
To: [EMAIL PROTECTED]
Subject: Re: Re: Approved (KMM6926068V21962L0KM)
Dear Compaq Customer,
Thank you for choosing HP Americas Consumer
Thanks.
Best Boards :: BbBoard
http://bb.bbboy.net
Why do idiots do this?
get a clue mate. The mailing list address is snatched from the address
book by the Windows virus and then spams everyone using random email
addresses as the From: in order to generate misplaced trust in the
I posted the question below earlier on. Following further research it seems
that libmysqlclient needs the functions provided by -lz but I don't know how to
get that flag into the make file.
So I tried reinstalling mysql323-client and noticed the following warning:
*** Warning: This library
Well, I'm still trying to sort this problem out (for continuity my first two
posts can be found below) but I'm getting near the end of my tether with this
one and not sure where to go next. I'm very tempted just to give up on FreeBSD
and try Debian.
I have tried reinstalling libtool from the
I have updated my BIOS, unselected acpi as the boot routine for install
freezes my pc what next? Note have tried same with 4.8 stable and 5.1 ?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Dear Sir,
I'm required to run a.out binaries like foxplus
in a recent Intel based hardware. I have chosen
FreeBSD 5.1 and successfuly installed. But I could
not run a.out binaries like Foxplus. I tried it by
load ibcs modules and aout modules in /boot/kernel
directory. My foxplus did not
On Tue, 19 Aug 2003, Jonas wrote:
I have connected the console port on a Cisco router to COM1 on my fbsd
box.
Which program on the fbsd can I use to access the router?
Does the COM port need to be mounted and how do I set the speed?
tip com1 works fine for console access.
man tip will
Charles Howse wrote:
cd /usr/src
make buildworld (drat, I should have done make -j4 buildworld!)
Actually, no, don't do the -j4 - I think that's why it worked.
I was fiddling with the -j flag once and ran into a bunch of
problems, when it was pointed out that this isn't a supported
way of doing a
FreeBSD FreeBSD5.kicks-ass.net 5.1-RELEASE FreeBSD 5.1-RELEASE #2: Fri Jun
27 14:49:55 PDT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/LAPTOP i386
I am currently trying to get sendmail working to submit my first port but
its not working(nearest I can tell). I am using pr-new to submit it,
I've did a google search on this, and an archive search. For an extra
measure of completeness, I scanned the handbook.
Here's the question:
I currently make my users reset their passwords every 90 days.
However, nothing stops them from reusing the same password. passwd
happily allows users to
Could you install FreeBSD on an existing version of Windows 2000 Professional and
still have the option of choosing which OS to run on your computer?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
cd /usr/src
make buildworld (drat, I should have done make -j4 buildworld!)
Actually, no, don't do the -j4 - I think that's why it worked.
I was fiddling with the -j flag once and ran into a bunch of
problems, when it was pointed out that this isn't a supported
way of doing a make
Our virus detector has just been triggered by a message you sent:-
To: [EMAIL PROTECTED]
Subject: Re: Thank you!
Date: Tue Aug 19 15:51:24 2003
One or more of the attachments (wicked_scr.scr) are on
the list of unacceptable attachments for this site and will not have
been delivered.
Hi,
Could you install FreeBSD on an existing version of Windows 2000
Professional and still have the option of choosing which OS to run
on your computer?
Not directly, but if you have some space on your hard drive left, you can
shrink your Windows 2000 and install FreeBSD then. They will
On Tue, Aug 19, 2003 at 08:30:25PM +0900, lukek wrote:
Hi,
I am trying to upgrade from 4.5r to 4.8 and have sucessfully cvsup'd the
sources. As tried to build it though I got a strange error that I don't
quite understand.
=== gnu/usr.bin/cc/f771
cc -O -pipe -march=pentiumpro -DIN_GCC
On Tue, Aug 19, 2003 at 09:08:59PM +0200, Jaco van Tonder wrote:
linux: 'ipc' typ=17 not implemented
*** Assert in file lnasdbc.c at line 2373. ***
/snip
The program then freezes. Anyone got any ideas? I've googled for this, and
found only _1_ result, also somebody struggling with the same
Hi,
Now that I am ready to start installing applications, I have read *some*
of the documentation in man portupgrade and some articles on the web.
First, I did:
# tar -czvf dbpkg.tgz /var/db/pkg
Then:
#pkgdb -F
It found cvsupit was broken with no fix for 3 months, I deleted it and
all it's
nomally popa3d is not listing at all, inetd is.
1) add to /etc/rc.conf:
inetd_flags=-wW -a 192.168.254.3
You are, of course, correct.
Thanks, that is just what I wanted!
___
[EMAIL PROTECTED] mailing list
The message you emailed to [EMAIL PROTECTED], dated 08/19/03 17:48:55, contains the
W32/Sobig-F virus in the application.pif attachment.
Action taken: deleted
___
[EMAIL PROTECTED] mailing list
On Tue, 19 Aug 2003 01:14:08 -0700 (PDT)
Tiarnan O'Corrain [EMAIL PROTECTED] wrote:
--- [EMAIL PROTECTED] wrote:
Hello Tiarnan,
Thanks for your input. I had already turned off the PNPBIOS option.
I tried your
suggestion of recompiling with:
options
On Tue, 2003-08-19 at 18:28, mess-mate wrote:
Hi,
is there a way to upgrade my system other than with /stand/sysinstall ?
thanks in advance
mess-mate
This question is answered in detail in the Handbook. There's even a
French version available, iirc.
Basically you just need to cvsup your
Charles Howse wrote:
cd /usr/src
make buildworld (drat, I should have done make -j4 buildworld!)
Actually, no, don't do the -j4 - I think that's why it worked.
I was fiddling with the -j flag once and ran into a bunch of
problems, when it was pointed out that this isn't a supported
way of doing a
sorry for the OT, but
I changed ISP's (telus.net to shaw) and my httpd-error.log is showing and
error:
mod_unique_id: unable to gethostbyname(hostname_from_/etc/rc.conf)
There's a tweak somewhere for this but i forget where :P
Thanks
[EMAIL PROTECTED]
On Tue, 19 Aug 2003 18:37:09 -0400
Adam McLaurin [EMAIL PROTECTED] wrote:
| On Tue, 2003-08-19 at 18:28, mess-mate wrote:
| Hi,
| is there a way to upgrade my system other than with /stand/sysinstall ?
| thanks in advance
| mess-mate
|
| This question is answered in detail in the Handbook.
Som question on FreeBSD 5.x SMP Synchronization:
1.
On motherboards with 2-4 cpus (such as those from
Intel
and Supermicro and others), what is the
cache-snooping
chip part called? How can I determine if it is
present or not?
If the MP motherboard does not have hardware cache
On 4.8-20030810-STABLE, with
linux_base-8-8.0_1
When I run Linux Netscape 7.1, I get the
following messages on the console:
linux: 'ipc' typ=258 not implemented
Also, when I run Linux OpenOffice, I get many
instances of the following messages on the console:
linux: syscall mmap2 is
On Tue, Aug 19, 2003 at 04:39:17PM -0700, Joseph Davida wrote:
Are these syscalls not implemented in Linux kernel
2.4.x?
Surely, but Linux != FreeBSD. They're not present in older Linux
kernels, so glibc will fall back to other syscalls if they are not
present, and the binary continues to
On Mon, Aug 18, 2003 at 11:21:22PM -0500, Glenn Johnson wrote:
On Sat, Aug 16, 2003 at 10:39:28PM +0100, Lewis Thompson wrote:
I'm not sure if this isn't a bit off-topic but I hope somebody
might know the answer anyway. I'm running 5.1-R and I've cups-lpr
(and all the other necessary
Is there a way to swap a program back in, after it has been swapped out?
(FreeBSD 4.7R).
I had a rather huge task, and now my ps shows entries like:
... 9480 v2 IWs+ - 0:00.00 /usr/libexec/getty Pc ttyv2
I'd like to have it swapped back in, please. :) I read somewhere that if the
In the last episode (Aug 20), Mark said:
Is there a way to swap a program back in, after it has been swapped
out? (FreeBSD 4.7R).
I had a rather huge task, and now my ps shows entries like:
... 9480 v2 IWs+ - 0:00.00 /usr/libexec/getty Pc ttyv2
I'd like to have it swapped
Hello,
Has anybody ever used rcorder before? I need to run my firewall script after all other
scripts on /usr/local/etc/rc.d... I checked the man rcorder and there's none. none on
make search name=rcorder either. Or is this built-in the system and you just have to
put in the headers on your
In the last episode (Aug 20), Michael R. Jacalan said:
Has anybody ever used rcorder before? I need to run my firewall
script after all other scripts on /usr/local/etc/rc.d... I checked
the man rcorder and there's none. none on make search name=rcorder
either. Or is this built-in the system
having trouble with cvsup keeps refuseing to let me log in
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wed, Aug 20, 2003 at 09:55:21AM +0800, Michael R. Jacalan wrote:
Hello,
Has anybody ever used rcorder before? I need to run my firewall script after all
other scripts on /usr/local/etc/rc.d... I checked the man rcorder and there's none.
none on make search name=rcorder either. Or is
Hello,
I'm looking for a program or daemon that will watch my USB ports and
launch a specific script when specific devices are attached. Any pointers to
where I could find such a beast much appreciated...
Thanks,
alex
___
[EMAIL PROTECTED] mailing
1 - 100 of 122 matches
Mail list logo