On Sun, Mar 28, 2004 at 04:16:53PM -0800, peter lageotakes wrote:
I dont have experience working with this particular
driver. However, I did some searching on:
www.freebsd.org/ports and I did locate the source
code. It can be downloaded off of freebsd.org:
On Monday, 29 March 2004 at 9:37:39 +0200, Ludo Koren wrote:
on 5.2.1-RELEASE-p3, I did:
...
vinum create vinumgrow
vinumgrow:
drive d3 device /dev/da2s1h
drive d4 device /dev/da3s1h
sd name mirror.p0.s1 drive d3 plex mirror.p0 size 0
sd name mirror.p1.s1 drive d4 plex mirror.p1 size
hi, i have a intel875 motherboard,and sata raid drives(serial hardware raid). plz tell
me wheather i can configure this in freebsd 5.2.1(i386).
thanks regards
Ritwik Das.
-
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
ls,
I am building the cvs version of freebsd on a openbrick machine. My
present installation is a 5.0 version with a broken su. su - gives a
bus error. When i throw away usr/obj and usr/src, cvsup all possible
things, and do a make build world, the machine works for a day or so
and then
On Mon, Mar 29, 2004 at 02:53:38AM +0200, Harald Schmalzbauer wrote:
I tried the nvnet driver from the ports some days ago with a nforce2 and it
worked flawlessly.
Many thanks, I have it working now. Summary for anyone else who needs to do
this:
- fetch nvnet.tar.gz from
I would like to delay sendmail starting until AFTER my local daemons
start. Is there a way to do this or is it built into the base system.
Could I set SENDMAIL=NO in rc.conf and then write a script in local to
start the sendmail daemon? The reason I have to do this is because I'm
using a djbdns
Hi all,
I upgraded from 5.1 to 5.2.1p3 over the weekend, and finished off with a Nessus
scan to check that ssh was the only port visible to the outside world. Despite
a recent (i.e. last Thursday) cvsup to sync the source tree, I'm getting a
high severity warning about a hole in SSH based on the
Do I need to be concerned about these boot entries in /var/log/messages
(running -CURRENT i386):
kernel: pci1: PCI bus on pcib1
- kernel: $PIR: ROUTE_INTERRUPT failed.
kernel: pci1: display, VGA at device 0.0 (no driver attached)
and I presume to be related:
kernel: vga0: Generic ISA
* Daan Hoogland [EMAIL PROTECTED] [20040329 11:56]: wrote:
ls,
I am building the cvs version of freebsd on a openbrick machine. My
present installation is a 5.0 version with a broken su. su - gives a
bus error. When i throw away usr/obj and usr/src, cvsup all possible
things, and do
* Richard Stevenson [EMAIL PROTECTED] [20040329 03:41]: wrote:
Hi all
I'm in the process of trying to update Mailman from 2.1.1 to 2.1.4 on a
5.0 system, by doing make; make deinstall; make reinstall in
/usr/ports/mail/mailman. I'm getting an error during the reinstall
phase:
Upgrading
On Mon, 29 Mar 2004, Octavian Hornoiu wrote:
I would like to delay sendmail starting until AFTER my local daemons
start. Is there a way to do this or is it built into the base system.
Could I set SENDMAIL=NO in rc.conf and then write a script in local to
start the sendmail daemon? The
On Mon, Mar 29, 2004 at 10:32:42AM +0100, Danny Woods wrote:
Hi all,
I upgraded from 5.1 to 5.2.1p3 over the weekend, and finished off with a Nessus
scan to check that ssh was the only port visible to the outside world. Despite
a recent (i.e. last Thursday) cvsup to sync the source tree, I'm
hi all
I have a big problem with PPPoE server installed on freebsd 5.2.1. Authentication from
incoming user conection (iwan_petkow_draganow for example) is successful, but he can't
receive data from outside
networks (internet). Is this a routing problem? and how i can fix this?
in kernel i
Hy,
I just installed FreeBSD 5.2.1 on a Alpha DS20E server.
The installation was without problems.
The problem comes when I try to compile the kernel.
Following both the traditional or the new procedure
I always gets the forrlowing error:
- CUT CUT CUT -
awk -f
On Sat, 27 Mar 2004, Matthew Seaman wrote:
On Fri, Mar 26, 2004 at 06:01:51PM -0900, Joe Pokupec wrote:
Do I need to have X Windows installed for Java to 1.4 to run on FreeBSD 5.1?
To run, no. To build, what Matthew said.
You don't need a full installation of XFree86: all you need are the
On Wed, Mar 10, 2004 at 08:22:30PM +, Macio Plona wrote:
Hello,
Ive got laptop Toshiba Satellite A20-s103. There are no comms port, but
3 USBs.
I need get to console to some server, so i purchased an USB-RS232 adapter.
My system recognized it, but i cant `cu` or `tip` to any machine...
On Wed, Mar 10, 2004 at 08:45:29PM +0100, Jacques Beigbeder wrote:
On a FreeBSD 5.2.1, I have an *OLD* USB disk which works:
[ ... ] kernel: vendor 0x0c45 USB Mass Storage Device, rev 1.10/1.00, addr 2
[ ... ]
[ ... ] kernel: da2: 31MB (64000 512 byte sectors: 64H 32S/T 31C)
Another one
On Tue, Mar 16, 2004 at 08:41:50PM +0100, Tobias Roth wrote:
hi
i am looking for a color inkjet printer/scanner/copier combo.
it should be cheap, supported under 5.2.1, rather small, have separate,
cheaply available ink cartridges. it doesn't need to be fast or have any
fancy features.
On Mon, Mar 22, 2004 at 02:09:01PM +0100, Peter Schuller wrote:
So - if I want a USB 2 controller that works fine with FreeBSD, which one
shojuld I get / which chipset should it be using?
To be more specific I found a controllre by Q-Tec (425U) wtih a Via VT6202
chipset. Anyone know if
On Tue, Mar 23, 2004 at 08:31:28AM -0500, [EMAIL PROTECTED] wrote:
Running 4.9-STABLE, CUPS 1.1.19 and I'm trying to get an Epson Photo
Stylus 1270 (usb) working with the system and CUPS. So far, no luck.
I've walked through the setup for CUPS via http://127.0.0.1:631/. I'm
at a loss to
Matthew Seaman wrote:
On Mon, Mar 29, 2004 at 10:32:42AM +0100, Danny Woods wrote:
Hi all,
I upgraded from 5.1 to 5.2.1p3 over the weekend, and finished off with a Nessus
scan to check that ssh was the only port visible to the outside world. Despite
a recent (i.e. last Thursday) cvsup to sync
If anyone is successfully converting DVDs to SVCD (or
MPEG2 formats in general) I'd appreciate knowing what tools
they use.
I have been fine producing MPEG4 files with mencoder, but I
now have a networked video player (Hauppauge MediaMVP) which
doesn't support MPEG4 but supports MPEG2 just fine.
Hi All,
I have stuck with a problem with usb devices.
In case of FreeBSD 4.8, whenever a new USB device is attached to the
system, no device node is dynamically being created within the dev file
system.
This is in contrast to the behavior there with FreeBSD 5.0 where a new
device node is
Dan Nelson wrote:
In the last episode (Mar 28), Kris Kennaway said:
On Sun, Mar 28, 2004 at 08:28:31PM -0500, Shaun T. Erickson wrote:
Is there a dircmp command for 5.2.1-RELEASE-p3? I can't find one ...
Not in the base system. Maybe it's available in a port with a
different name. What does it
My portupgrade on one machine is failing in pango, with:
configure: error: Xrender.h not found.
=== Script configure failed unexpectedly.
And a sugested search for xrender.pc turns up nothing.
What can I do to fix this problem?
--
They that would give up essential liberty for temporary
On Sun, Mar 28, 2004 at 11:09:36AM -0800, Joe Falcone wrote:
... make WINE a hidden component in
the operating system and tell everyone about the new
compatability...
I'll bet the folks at OpenBSD would LOVE to hear more ideas
like this one.
Make your suggestions on THEIR mailing
On Mon, 29 Mar 2004, Jim Hatfield wrote:
I tried mencoder. The ports version won't produce mpeg2 (at
least not with libavcodec). The version from the mplayer site
will, but the results look like modern art. I got the same
with transcode, though it's a while since I used it. ffmpeg
won't even
Bernd Walter wrote:
ugen0: Prolific Technology PL2303 Serial adapter (ATEN/IOGEAR UC232A),
It's attached to ugen instead of uplcom/ucom
On a hardware notes ive read, that it needs a 'uplcom' driver, so i
loaded it to kernel:
root# kldstat
Id Refs AddressSize Name
51 0xc204c000
Has anyone installed a 5.2.1 on a Dell Power Edge ?
From what I have read so far It seems ok with the 4.7 version
--
http://66.102.9.104/search?q=cache:fT11f82O3U0J:prioris.mini.pw.edu.pl/
~gregory/FreeBSD/
delli386.html+freeBSD+dell+poweredge+1400hl=enie=UTF-8
But i have no echo on a 5.2.1
We have a 1400SC running 5.2.1.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Monday, March 29, 2004 9:42 AM
To: Liste FreeBSD
Subject: 5.2.1 Dell Power Edge 1400 install
Has anyone installed a 5.2.1 on a Dell Power Edge ?
From what I have read so far It
stan wrote:
My portupgrade on one machine is failing in pango, with:
configure: error: Xrender.h not found.
=== Script configure failed unexpectedly.
And a sugested search for xrender.pc turns up nothing.
What can I do to fix this problem?
That file is part of the XFree libraries
Shaun T. Erickson wrote:
Unfortunately, I don't, or I'd lift a copy. :)
Why not ask Google? ;-)
http://www.google.de/search?hl=delr=ie=ISO-8859-1q=dircmp.shsa=Ntab=gw
Simon
signature.asc
Description: Digital signature
First let me say that I'm new to FreeBSD and the Unix OS.
I'm trying to install 5.0 on a HP Netserver LC with an AIC-7770 SCSI
controller. The controller is not being detected during boot.
That particular problem is referenced in the installation documents under
troubleshooting but makes
On Mon, 29 Mar 2004, Greg 'groggy' Lehey wrote:
On Monday, 29 March 2004 at 9:37:39 +0200, Ludo Koren wrote:
It finished with the following error:
growfs: bad inode number 1 to ginode
I have searched the archives, but did not find any answer. Please,
could you point to me what I did
Dear Trend Micro customer,
As of March 29, 2004 12:29 AM PST, TrendLabs has declared a Medium Risk Virus Alert to
control the spread of WORM_NETSKY.Q. TrendLabs has received several infection reports
indicating that this malware is spreading in Japan and China.
This new NETSKY variant
Hello all:
I am trying to submit user-class jobs to a FreeBSD platform running 5.2.1
And when I attempt to malloc in excess of 512MB, my program core dumps.
I have 1.5GB or RAM, with PAE installed.
With various kernel patches, no X, and some other constraints I can malloc
up about 1.2GB
On Mon, 29 Mar 2004 16:13:18 +0100, in local.freebsd.questions you
wrote:
On Mon, 29 Mar 2004, Jim Hatfield wrote:
I tried mencoder. The ports version won't produce mpeg2 (at
Here's what I do: I decode the MPEG to YUV using mplayer, then
reencode back to MPEG using mjpegtools.
Interesting - I
vinum - l ...
D d1State: up /dev/da1s1e A: 0/15452 MB (0%)
D rd1 State: up /dev/da1s1h A: 0/1023 MB (0%)
You shouldn't have more than one drive per spindle.
It has 'historical' reason. I started with vinum,
* Jay Moore [EMAIL PROTECTED] [2004-03-29 08:24]:
On Sunday 28 March 2004 12:44 am, Malcolm Kay wrote:
On Sunday 28 March 2004 11:43, Jay Moore wrote:
I have a FreeBSD 4.9 system; I am also running KDE...
I'm building this system for my son (college student) snip ...
/snip
On Mon, Mar 29, 2004 at 11:26:21AM -0500, [EMAIL PROTECTED] wrote:
I am trying to submit user-class jobs to a FreeBSD platform running 5.2.1
And when I attempt to malloc in excess of 512MB, my program core dumps.
That's an administrative restriction to prevent a runaway process
killing the
+++ Tadimeti Keshav [freebsd] [29-03-04 06:05 +0100]:
| hi all,
| I am able to mount ordinary data CDs, but not VCDs.
| Hence cannot watch VCDs with mplayer.
| Am I missing something?
| Thanks
| Tk
mplayer -cdrom-device /dev/acd0c -vcd 1 -fs
Shantanoo
hi,
is there a mail list or forum out there for phpmyadmin support that somebody
can direct me to?
thanks in advance,
Noah
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Question...Is anyone else running amavisd-new with spamassassin from
ports?
If so, where/how should I be updating or altering the spamassassin
rules?
I'd like to try updating some of the rules from the spamassassin site,
but didn't know where the ports version was putting the rulesets...
a)
On Mon, Mar 29, 2004 at 05:54:08PM +0200, Simon Barner wrote:
stan wrote:
My portupgrade on one machine is failing in pango, with:
configure: error: Xrender.h not found.
=== Script configure failed unexpectedly.
And a sugested search for xrender.pc turns up nothing.
What can I
On Fri, Mar 26, 2004 at 09:46:44AM +0100, Dag-Erling Smørgrav wrote:
: Jonathon McKitrick [EMAIL PROTECTED] writes:
: Interestingly, my laptop (running 4.8R) is working now. No password needed
: for any rsh operation to this site. But the same procedure on a 4.8-stable
: box (this one, now)
On Mon, Mar 29, 2004 at 09:30:42AM -0800, Noah wrote:
is there a mail list or forum out there for phpmyadmin support that somebody
can direct me to?
There's several mailing lists accessible from:
http://sourceforge.net/mail/?group_id=23067
but
Hi,
I've been having trouble trying to get an onboard CMI8738 sound
chip working on 4.9-stable. The motherboard in question is an
ASUS A7V266-C.
I've tried using options PNPBIOS in the kernel config, but it
doesn't seem to improve matters. I've included the relevant
lines from dmesg /
Try this:
http://www.opennet.ru/docs/RUS/squid_filter/squidguard.html
It is in Russian, but you will figure it out by looking at config files. I
installed it on 5.2.1 and it is stable. Great way of keeping your users
off the bad sites.
Regards,
Denis
I have seen lots of pages on google on how
Hi all.
Please also reply to my mailbox as I'm not on the list.
Thank you.
I was installing a new drive on my 5.2.1-p3 and I believe
I made some mistake while using fdisk and bsdlabel.. in
fact the partition table for my bootable disk has changed.
this was my fdisk amrd0 before:
Good afternoon,
I have a series of wma files (speeches) which I convert to wav via
mplayer. The wav files played fine using both xmms and Noatun. However when I burn
them onto a cd via burncd:
burncd -f /dev/acd0c audio *.wav fixate
the resulting audio on the disc gives me high
Advisory
Please be advised that sita.int has migrated to sita.aero.
Your email to the addressed individual in SITA has not been delivered
Please resend your mail using the correct e-mail address: @sita.aero
Note, you will not receive a
hello!
i have a little problem, can u help me?
i would like to buy a new server called HP Proliant ML310
the hardware on this machine for the ethernet is a Compaq NC7760
this is working on FreeBSD 5.2.1? i have not seen this number on the
hardware notes
thanks for help :-)
Banana
I would like to stay patched with the latest security advisories.
However usually I wait until the next release iso becomes available and
do a fresh install that includes all the known exploites. My reason
behind this is the makeworld, CVSup, and mergemaster is very time
Cc to -newbies removed. Doesn't need to be cross-posted.
* Tadimeti Keshav [EMAIL PROTECTED] [2004-03-29 08:26]:
Hi,
I have a couple of questions:
1. I compiled mplayer with -DWITH_GUI.
When I use gmplayer (GUI) to open a video file, I
get the error ...no video-out -vo available
I
I recently ran a portupgrade on one of our servers. The following
error and exchange came up:
server# pkgdb -F
--- Checking the package registry database
Stale dependency: portupgrade-20040325_1 - openssl-0.9.7d
(security/openssl):
New dependency? (? to help): ?
[Enter] to skip, [Ctrl]+[D]
On Monday 29 March 2004 01:28 pm, Sean Murphy wrote:
I would like to stay patched with the latest security advisories.
However usually I wait until the next release iso becomes available and
do a fresh install that includes all the known exploites. My reason
behind this is the makeworld,
On Mar 29, 2004, at 2:28 PM, Sean Murphy wrote:
I don't want to build all sources when I just need these on my
system (bin, man, and crypto). The same selection I use from a new
install from /stand/sysinstall. Is that possible?
If you look at /etc/default/make.conf for a bunch of components
* Jim Hatfield [EMAIL PROTECTED] [2004-03-29 08:50]:
On Mon, 29 Mar 2004 16:13:18 +0100, in local.freebsd.questions you
wrote:
On Mon, 29 Mar 2004, Jim Hatfield wrote:
I tried mencoder. The ports version won't produce mpeg2 (at
Here's what I do: I decode the MPEG to YUV using mplayer,
On 29 Mar, Bill Nutt [EMAIL PROTECTED] wrote:
Hi,
I've been having trouble trying to get an onboard CMI8738 sound
chip working on 4.9-stable. The motherboard in question is an
ASUS A7V266-C.
Not sure if it's relevant, but the more it's posted the easier
it'd be to find..
Try turning off
On Monday 29 March 2004 12:03 pm, Bart Silverstrim wrote:
I recently ran a portupgrade on one of our servers. The following
error and exchange came up:
server# pkgdb -F
--- Checking the package registry database
Stale dependency: portupgrade-20040325_1 - openssl-0.9.7d
(security/openssl):
On Monday, 29 March 2004 at 18:38:20 +0200, Ludo Koren wrote:
vinum - l ...
D d1State: up /dev/da1s1e A: 0/15452 MB (0%)
D rd1 State: up /dev/da1s1h A: 0/1023 MB (0%)
You shouldn't have more than one drive per spindle.
It has
Hello,
I've googled for this but came up empty. I cannot find the fortune
program on this recently installed box. On 4.9-STABLE it lives in
/usr/games/fortune.
--
Regards,
Doug
___
[EMAIL PROTECTED] mailing list
Hi Everyone,
When my system boots up, it tries to load a packag called 'This'. In
fact, the line that comes up on the screen is:
Local package initialization:This:not found
What file controls local packages?
--
~*\\~*~\\*~Cheers
~*~\\~*~\\~*~Jason
Hi,
I have installed FreeBSD 5.2 and I am trying to get to access mail from
the outside world. But when I do a telnet to port 25 I get this error,
telnet mail.eatme.com
trying xxx.xxx.xxx.xxx
telnet: connect to address xxx.xxx.xxx.xxx: Connection refused
where do I need to go to tell my
Doug Poland wrote:
Hello,
I've googled for this but came up empty. I cannot find the fortune
program on this recently installed box. On 4.9-STABLE it lives in
/usr/games/fortune.
/usr/games/fortune on my 5.2.1-RELEASE-p3 box.
-ste
___
In the last episode (Mar 29), Jason Dusek said:
Hi Everyone,
When my system boots up, it tries to load a packag called 'This'. In
fact, the line that comes up on the screen is:
Local package initialization:This:not found
What file controls local packages?
Those are the *.sh scripts in
Perhaps you didn't install the games package. Run /stand/sysinstall and select
configure - distributions - games.
--
TONI HEINONEN
TELEWARE OY
+358 40 836 1815 / +358 (9) 3434 9110
Itäkeskuksen Maamerkki
00930 Helsinki, Finland
[EMAIL PROTECTED] / www.teleware.fi
On Mon, 29 Mar 2004 13:51:01 -0500 (EST)
Ada Cheng [EMAIL PROTECTED] wrote:
Good afternoon,
I have a series of wma files (speeches) which I convert to wav
via
mplayer. The wav files played fine using both xmms and Noatun.
However when I burn them onto a cd via burncd:
burncd
- Original Message -
From: Payne [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, March 29, 2004 3:10 PM
Subject: Sendmail refusing connection
Hi,
I have installed FreeBSD 5.2 and I am trying to get to access mail from
the outside world. But when I do a telnet to port 25 I
On Mon, 29 Mar 2004 06:00:33 +0100 (BST)
Tadimeti Keshav [EMAIL PROTECTED] wrote:
Hi,
I have a couple of questions:
snip
2. using the CLI mplayer, how can I play the video
file from a given place, say after 19 minutes and 30
seconds?
mplayer -ss 19:30 ...
On 2004-03-29 15:07, Charles Swiger [EMAIL PROTECTED] wrote:
On Mar 29, 2004, at 2:28 PM, Sean Murphy wrote:
I don't want to build all sources when I just need these on my
system (bin, man, and crypto). The same selection I use from a new
install from /stand/sysinstall. Is that possible?
If
Hello freebsd-questions,
I can't build jdk-1.4.2p6_4 from the ports collection on jdk-1.4.2p6_4
system. Can anybody help please?
=== Building for jdk-1.4.2p6_4
# Start of jdk build
bsd i586 1.4.2-p6 build started: 04-03-30 02:05
if [ -r ./../../deploy/make/Makefile ]; then \
( cd
Hi there
how can i allow a user which i don't want to take to the operators or wheel
group to mount the cdrom drive?
thanx
mw
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Hi!
After browsing and googleing a lot I have no other idea how to mount my
logical partition. I'm using RELEASE-5.2.1 with a freshly compiled
kernel (yes, with msdosfs included).
The output of fdisk is here:
#fdisk ad0
*** Working on device /dev/ad0 ***
parameters extracted from
I'm sorry, but because I have been receiving more than 100 junk-mail
messages an hour, I no longer accept e-mail from unregistered senders.
To send me a message, please follow the path that best describes your needs:
Business Contacts
-
1. Register as a valid sender by
At 2004-03-29T21:04:19Z, Greg 'groggy' Lehey [EMAIL PROTECTED] writes:
On Monday, 29 March 2004 at 18:38:20 +0200, Ludo Koren wrote:
It has 'historical' reason. I started with vinum, when it was not
possible to mirror root partition (at least I found just document
'Bootstrapping Vinum: A
I've run into the following problem with my ports collection. Whatever
port I'm trying to install the process stops returning this:
cd /path/to/some/port
make install
... ...
make all-recursive
Making all in lib
cd: can't cd to lib
*** Error code 1
Stop in
On Tue, Mar 30, 2004 at 01:20:42AM +0200, Marcus Wellpoth wrote:
Hi there
how can i allow a user which i don't want to take to the operators or wheel
group to mount the cdrom drive?
thanx
mw
___
[EMAIL PROTECTED] mailing list
On Mon, 2004-03-08 at 15:54, Kris Kennaway wrote:
make describe complains on each of them.
Post the errors if you want us to be able to analyze things.
Well, after doing a make describe in /usr/ports, it barfs with:
---8---
=== databases/mytop
Hi,
This is 4.9-Stable.
I have cvsup'ed my /usr/doc directory.
See below what happens when I do a make in the /usr/doc directory.
In the past the make worked just fine, but not after last cvsup.
Any idea what's wrong with current cvsup on the docs?
Regards,
Rob.
# cd /usr/doc
# make
[...]
You don't mount VCDs to play them. A simple command to play a VCD would look
something like this:
mplayer -vcd 2
This means play starting from track 2. You can of course start from track 1.
What's important is that you MUST specify a track, or else mplayer will exit
with an error message.
Of
On Mon, Mar 29, 2004 at 05:56:13PM -0600, Frank Knobbe wrote:
On Mon, 2004-03-08 at 15:54, Kris Kennaway wrote:
make describe complains on each of them.
Post the errors if you want us to be able to analyze things.
Well, after doing a make describe in /usr/ports, it barfs with:
---8---
On Mon, 29 Mar 2004 15:22:14 +0100
Jim Hatfield [EMAIL PROTECTED] wrote:
I tried mencoder. The ports version won't produce mpeg2 (at
least not with libavcodec). The version from the mplayer site
will, but the results look like modern art. I got the same
with transcode, though it's a while
Hi ,
I really need help getting FreeBSD. I cant seem to figure out how to get FreeBSD. I
really want and need this but I need to know how to get it. My platform is I386 and
please email me witha solution.
Thanks
-
Do you Yahoo!?
Yahoo! Finance Tax Center -
I was wondering what is a good, free ;) anti virus program for FreeBSD.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
You can get FreeBSD from :
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors.html
Tells you various ways to get freebsd from.If you want to download it, you
should try the mirrors.
..akshay.
Original Message:
-
From: Steven Soria [EMAIL PROTECTED]
Date: Mon,
I would recommend Clam Antivirus. http://clamav.sourceforge.net
- Jamie
On Mon, 29 Mar 2004, Earl Larsen wrote:
I was wondering what is a good, free ;) anti virus program for FreeBSD.
___
[EMAIL PROTECTED] mailing list
Dear Freebsd Owners and Developers,
I am interested in getting freebsd for server functions and it is confusing me on how
to use it and how to install it! Is there a possible way to download a .iso cd image
of freebsd? It sounds very interesting and i would think it would be a great operating
On Mon, 2004-03-29 at 19:09, Kris Kennaway wrote:
I can't see anything in this or some of the other ports you mentioned
(namazu2) that might cause problems. My best guess is that something is still
non-standard about your system, but I can't do better than that.
Kris,
I finally found the
Toni Heinonen wrote:
Perhaps you didn't install the games package. Run /stand/sysinstall and select
configure - distributions - games.
That was it, thanks much...
___
[EMAIL PROTECTED] mailing list
Thank you for your response
What i'd like to be able to do on this 5.2.1 machine
is run a user job that may take up 1.5GB of mem, i'd
like it to start swapping which it doesn't do, nor
does it panic, nor does it lock up. It stays
responsive.
Taking what U said i recompiled the kernel as a non
On Mon, Mar 29, 2004 at 10:58:15PM -0600, Frank Knobbe wrote:
I finally found the problem to the make index problem I was having. The
issue was that make index barfs with:
Warning: Duplicate INDEX entry: *** Error code 1
Warning: Duplicate INDEX entry:
make describe barfs with:
===
[ please cc me as I am not on the list]
I have been trying to upgrade cups to 1.1.20 and have been running into
some problems with libraries not being found (specifically jpeg.9 and
tiff.4). After a few different iterations of pkg_add, portupgrade,
portinstall, and accompanying pkg_delete,
On Mon, 29 Mar 2004 08:51:16 -0800 Joshua Lokken wrote:
Jay Moore [EMAIL PROTECTED] [2004-03-29 08:24]:
[snip]
1) once the file system cd is mounted, a fixed amount of no activity time
must pass before it is umount'd
I'm not sure what you mean by this. I've never had to wait for any
Joe Falcone wrote:
Dear Freebsd Owners and Developers,
I am interested in getting freebsd for server functions and it is confusing me on how to use it and how to install it! Is there a possible way to download a .iso cd image of freebsd? It sounds very interesting and i would think it would be a
On 29-mrt-04, at 11:36, Odhiambo Washington wrote:
* Daan Hoogland [EMAIL PROTECTED] [20040329 11:56]: wrote:
ls,
I am building the cvs version of freebsd on a openbrick machine. My
present installation is a 5.0 version with a broken su. su - gives a
bus error. When i throw away usr/obj and usr
Hi,
The multimedia internet radio sites, usually link to something like
mms://211.233.92.44/L_1FM
but when I click on such a link I get an Alert dialog, that says:
mms is not a registered protocol
How can I teach mozilla to open mplayer with this site, instead
of popping up this
is there a way to sign pkcs 10 certificates with openssl package that
comes with freebsd???
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Dear Sirs.
I ran into big trouble after a thermal RAID failure. Our main server is a dual PIII
with a Tyan Thunder 2500 main PCB, a AMI MegaRAID Enterprise 1600 four channel RAID
controller attached to 9 IBM DDYS 35GB harddrives. 8 disks build up a RAID level 5,
one disk is hotspare.
Aber
Hi all,
We're using ipfw as a firewall solution on our network. We are using
stateful rules.
The problem I have though, is that when we reload our ipfw ruleset, all
existing connections to or through the particular machine are lost. This
means a lot of hung ssh sessions.
Is there any way to
100 matches
Mail list logo
