jdow wrote:
> From: "Robert Gabaree" <[EMAIL PROTECTED]>
>> I tried to update my new server to the new time zone by running
>> 'tzsetup' and selecting Eastern. However, instead of showing 11:45,
>> it shows 6:45 - 5 hours later. I even tried to do a 'cp /usr/share/
>> zoneinfo/EST5EDT /etc/loc
Jason Morgan wrote:
> Try mounting the device as SCSI cd device. I have to do the same with
> a Pioneer DVD-ROM (a DVD-118, I believe). You'll need (at least)
>
> device scbus
> device cd
Surely you need
device atapicam
to make that work. In fact, if the OP is
I am using the YAB desklet from adesklets and have configured it to use my
choice of icons and apps by editing config.txt. However, yab seems to be
loading up from some other file or is not scanning the config file while
load. When i right click and choose configure it brings up the
config.txtfile
I just tried to ssh into freebsd server using Putty (pocketputty actually).
I got a connection (sort of) but my Putty device put up the question
"...unknown certificate.do you want to trust it..." or words to that
effect. Due to finger problems on the touchscreen I said NO. OOPs -
now
Subhro wrote:
> yourself. However remember to cvsup your ports tree before you start
> using it to get the required software. Refer to the handbook for
> understanding how ports work.
For most people portsnap would be a better way of updating one's ports
tree. Firstly, it's in the base system and
Every couple of days, one of my Dell Work-Stations running freebsd 6.1 simply
locks up. The box can be pinged only IE there are no services running, locked
up screen/kbd/mouse. No caps-lock light action on kybd... On/OFF time.
Actually OFF doesn't work either (It's a dell, with ACPI power swi
Hello,
Welcome to the world of FreeBSD. First of all, why are you trying to
install binaries? I would say it is wiser to use the port system
yourself. However remember to cvsup your ports tree before you start
using it to get the required software. Refer to the handbook for
understanding how port
From: "Robert Gabaree" <[EMAIL PROTECTED]>
Hi,
I tried to update my new server to the new time zone by running
'tzsetup' and selecting Eastern. However, instead of showing 11:45,
it shows 6:45 - 5 hours later. I even tried to do a 'cp /usr/share/
zoneinfo/EST5EDT /etc/localtime" but it d
Hello
First I was directed to post the here because I posted to the stable mailing
list before re-reading what it's purpose is- I apologise-.
I am playing with freebsd 6 on a testing box. I Upgraded l from 6.0 to 6.1
because it looked like popular opinion is that it's got a number of
i
On 8/23/06, Lilo Stich <[EMAIL PROTECTED]> wrote:
Hi
I was wondering if there is something like "Scan2PDF" for FreeBSD? If not,
how is the way to do it?
I'm kinda planning to port http://sourceforge.net/projects/gscan2pdf
___
freebsd-questions@freebs
On FreeBSD 6.1, I am experiencing a problem involving my system freezing. This
happens at irregular intervals, on the order of days rather than hours or
weeks. It is a total freeze; everything on the screen becomes completely
static, no response from the mouse or keyboard, Ctrl-Alt-Backspace doe
Anyway this morning I was thinking under situations
where this solution is not appropriate whether it was
possible to access device files just by exporting the
/dev filesystem thro' NFS?
Will that work? Are there any gotchas?
I hope everybody hasn't forgotten this thread, I'm curious about this
On Tuesday, 22 August 2006 at 23:45:19 -0400, Robert Gabaree wrote:
> Hi,
>
> I tried to update my new server to the new time zone by running
> 'tzsetup' and selecting Eastern. However, instead of showing 11:45,
> it shows 6:45 - 5 hours later. I even tried to do a 'cp /usr/share/
> zoneinfo/EST5
Hi,
I tried to update my new server to the new time zone by running
'tzsetup' and selecting Eastern. However, instead of showing 11:45,
it shows 6:45 - 5 hours later. I even tried to do a 'cp /usr/share/
zoneinfo/EST5EDT /etc/localtime" but it didn't help. What can I do
to fix it?
Tha
Hi
I was wondering if there is something like "Scan2PDF" for FreeBSD? If not,
how is the way to do it?
Thanks.
Michael
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Funny thing about Freebsd is that you can run linux-executables.
If you install www/linux-firefox you can use linuxplugins like flash
and it just works.
At least one less complication.
P.S. It also runs much faster. I find that very odd. Why would a non
native ap. run faster than a compile
Funny thing about Freebsd is that you can run linux-executables.
If you install www/linux-firefox you can use linuxplugins like flash
and it just works.
At least one less complication.
Wow, that is awesome. I never knew about that.
___
freebsd-ques
On 8/22/06, Vizion <[EMAIL PROTECTED]> wrote:
--- It is http.test
that appear to fail
The failure begins with:
http.test
http-3.3 http::geturl FAILED
Contents of test case:
set token [hrrp::geturl $url]
http:: data $token
Test generated error; return code was: 1
Retur
Hi,
I am looking for a good howto or a detailed explanation in order to
deploy Linux HA on two BSD boxes.
Thank you very much.
«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§«?»¥«?»§
Gregober ---> PG
Hello!
I installed Mathematica 5.1 on my FreeBSD 6.1 system. And I can't run it..
That's very strange behaviour:
~/Mathematica/SystemFiles/FrontEnd/Binaries/Linux % ./Mathematica
./Mathematica: relocation error: /usr/X11R6/lib/libX11.so.6: undefined
symbol: __stderrp
But:
~/Mathematica/Syste
On Wed, Aug 23, 2006 at 12:32:06AM +0200, Jose Luis Alarcon Sanchez wrote:
> Hi.
>
> I have a i686 machine with FreeBSD 6.1-RELEASE. It works very well...
> except the DVD player. This is the line the kernel show at boot about
> this unit:
>
> acd0: DVDROM at
> ata1-master UDMA66
>
> Well, thi
Hi.
I have a i686 machine with FreeBSD 6.1-RELEASE. It works very well...
except the DVD player. This is the line the kernel show at boot about
this unit:
acd0: DVDROM at
ata1-master UDMA66
Well, this DVD works allright with diferent GNU/Linux flavours, without
any kind of problem. But in Free
On Tue, Aug 22, 2006 at 10:36:30AM -0700, Vizion wrote:
> > -Original Message-
> > From: Brooks Davis [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, August 22, 2006 10:20 AM
> > To: Vizion
> > Cc: freebsd-questions@freebsd.org; [EMAIL PROTECTED]
> > Subject: Re: kde3 Make Install failure
> >
Hi there,
I've been looking into port knocking software but I am wondering if
there is a solution out there to have somebody login into a website and
the public IP address from where they are coming from is inserted in to
the rc.firewall program for a temporary amount of time.
Any clues on t
On 2006-08-22 08:43, beno <[EMAIL PROTECTED]> wrote:
>Giorgos Keramidas wrote:
>> Don't edit GENERIC. It's very rarely a good idea. If you spend
>> some time to fine tune GENERIC to your own particular setup,
>> matching your own preferences, you may be surprised in a very bad
>> way after the ne
--- Garrett Cooper <[EMAIL PROTECTED]> wrote:
> On Aug 21, 2006, at 6:41 PM, backyard wrote:
>
> >
> >
> > --- Garrett Cooper <[EMAIL PROTECTED]>
> wrote:
> >
> >> backyard wrote:
> >>> I'm having problems installing GRUB on my Dell
> >>> Optiplex GX1 pentium3 500 BIOS A10. I'm setting
> >> thi
Yeah I have seen that happen before, like the boot area didn't burn cleanly
or the error correction on the drive isn't as good as on other drives.
-Derek
At 01:06 PM 8/22/2006, Jerry McAllister wrote:
Problem solved - partly anyway.
It is apparently a marginal CD burn.
> You can go
On Tue, Aug 22, 2006 at 10:36:30AM -0700, Vizion wrote:
> > -Original Message-
> > From: Brooks Davis [mailto:[EMAIL PROTECTED]
> > Sent: Tuesday, August 22, 2006 10:20 AM
> > To: Vizion
> > Cc: freebsd-questions@freebsd.org; [EMAIL PROTECTED]
> > Subject: Re: kde3 Make Install failure
> >
On Aug 21, 2006, at 8:50 PM, Brett Glass wrote:
I'm working with a system in which a program is failing because it
sometimes tries to write more data to a stream socket than will
fit. It reports that it can't write to the socket because it's out
of buffer space, then dies ungracefully.
Wha
Problem solved - partly anyway.
It is apparently a marginal CD burn.
> You can go to bootdisk.org or freedos.org and download an iso image to make
> a bootable CD. I think you need to first get your system actually booting
> a CD of any OS, then move on to installing FreeBSD.
OK. I scrounge
On Aug 22, 2006, at 12:19 AM, Erik Trulsson wrote:
On Tue, Aug 22, 2006 at 06:38:46AM +0100, Matthew Seaman wrote:
Lowell Gilbert wrote:
Garrett Cooper <[EMAIL PROTECTED]> writes:
Gerard Seibert wrote:
IMHO, it might be a lot easier for him to use portsnap. Especially
if he is not familia
On Aug 21, 2006, at 6:41 PM, backyard wrote:
--- Garrett Cooper <[EMAIL PROTECTED]> wrote:
backyard wrote:
I'm having problems installing GRUB on my Dell
Optiplex GX1 pentium3 500 BIOS A10. I'm setting
this
server up for a friend and not having GRUB isn't
the
biggest deal; I just wanted
> -Original Message-
> From: Brooks Davis [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, August 22, 2006 10:20 AM
> To: Vizion
> Cc: freebsd-questions@freebsd.org; [EMAIL PROTECTED]
> Subject: Re: kde3 Make Install failure
>
>
> On Tue, Aug 22, 2006 at 10:00:35AM -0700, Vizion wrote:
> > Try
On Tue, Aug 22, 2006 at 02:37:11PM +0300, Ivan Levchenko wrote:
> thanks, I know how to enable pf in freebsd, but is there a difference
> between enableing pf via loader.conf or rc.conf?
I think that using loader.conf, the pf module will get loaded around the
same sort of time as the kernel, where
On Tue, Aug 22, 2006 at 10:00:35AM -0700, Vizion wrote:
> Trying to compile and install kde3
> on amd64 FreeBSD 6.1-RELEASE #0. kde3 fails a test and then hangs.
>
> cd /usr/ports/x11/kde3
>
> Make runs fine but then:
>
> # Make Install
>
> terminates and hangs with following consol message:
>
On Tue, Aug 22, 2006 at 12:25:41PM -0400, beno wrote:
> Derek Ragona wrote:
> >Once you have only one version of the ported applications run
> >portmanager to be sure you have them and their dependencies all current.
> My version of portmanager is 0.2.0_1 which apparently has a bug that
> puts it
Trying to compile and install kde3
on amd64 FreeBSD 6.1-RELEASE #0. kde3 fails a test and then hangs.
cd /usr/ports/x11/kde3
Make runs fine but then:
# Make Install
terminates and hangs with following consol message:
-
se
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Alex Zbyslaw
> Sent: Tuesday, August 22, 2006 8:47 AM
> To: Vizion
> Cc: freebsd-questions@freebsd.org
> Subject: Re: devices
>
>
> Vizion wrote:
>
> >As an experiment I disconnected ad0 and then reb
On Tue, 22 Aug 2006 09:22:47 -0700 (PDT) unixforums 1 wrote:
> Alt+F4 didnt show anything. Alt+F2 did show at the end of the install:
> Before installing the Linux compatible module
> "mv: rename /boot/GENERIC to /boot/kernel: No such file or directory"
To avoid getting this (and many others) er
It solved the problem. Actually, I was not able to find libphp5.so anywhere
on my file system. I remember that when I initially installed php, I was
supposed to do make and then make install. When I had done make install, it
had returned me with an error that php was already installed. That, to me,
I will try that.
Thanks for your help
Thron
Derek Ragona <[EMAIL PROTECTED]> wrote: It sounds like the installer is having
some problem copying files. If 6.0
will install, I would install that version, then cvsup it to 6.1.
-Derek
At 11:22 AM 8/22/2006, unixforums 1 wrote:
>Alt+F
After trying out a couple of proprietary IM solutions, I have abandoned
my search in frustration and have been trying out various jabber
implementations. So far I have tested ejabberd & jabberd2. My biggest
issue thus far is that there is no way to archive IM traffic. Neither
of the above so
Derek Ragona wrote:
Once you have only one version of the ported applications run
portmanager to be sure you have them and their dependencies all current.
My version of portmanager is 0.2.0_1 which apparently has a bug that
puts it in an infinite loop!
beno
_
It sounds like the installer is having some problem copying files. If 6.0
will install, I would install that version, then cvsup it to 6.1.
-Derek
At 11:22 AM 8/22/2006, unixforums 1 wrote:
Alt+F4 didnt show anything. Alt+F2 did show at the end of the install:
Before installing the
Opps, I am bad! I guess I always just alt+f through the keys until I see
the screen
-Derek
At 11:12 AM 8/22/2006, John Nielsen wrote:
When running sysinstall from the FreeBSD CD the debug screen is at Alt-F2.
JN
On Tuesday 22 August 2006 12:02, Derek Ragona wrote:
> The debug scree
Alt+F4 didnt show anything. Alt+F2 did show at the end of the install:
Before installing the Linux compatible module
"mv: rename /boot/GENERIC to /boot/kernel: No such file or directory"
During the linux module install I saw these errors:
"ldconfig: warning: /usr/local/lib: No such file or direc
When running sysinstall from the FreeBSD CD the debug screen is at Alt-F2.
JN
On Tuesday 22 August 2006 12:02, Derek Ragona wrote:
> The debug screen should not be blank, in addition to this error message you
> will see all the output from the install up to that point.
>
> If this is a new instal
The debug screen should not be blank, in addition to this error message you
will see all the output from the install up to that point.
If this is a new install, I would blank the hard disk, and try a fresh
install. As the install is running check the debug screen periodically.
-Derek
do:
ls /var/db/pkg
Look for duplicate versions ports. You will need to use:
pkg_delete -f [port name]
to remove all of these ports that have duplicates, then reinstall that port.
Once you have only one version of the ported applications run portmanager
to be sure you have them and their depen
The debug screen is blank.
To verify I had a good download I went to a different mirror site and
downloaded the boot-only cd and had the same problems.
Thron
Derek Ragona <[EMAIL PROTECTED]> wrote: What was on the debug screen? alt+F4
gets you to that screen.
-Derek
At 10:36 AM
Hi;
This is becoming the project from hell! It started with an upgrade from
5.3. That *seemed* to go well except for the upgrade of ports. When I
went to use portmanager, it went into an infinite loop. Someone on this
list said that was because it was an old version of portmanager
(0.2.0_1) an
Vizion wrote:
As an experiment I disconnected ad0 and then rebooted from the iso image to see
what would be reported.
The installation menu reported
No disks found!
Does anyone have a clue as to what might be going on here and how I might be
able to deal with it?
It would appear that yo
What was on the debug screen? alt+F4 gets you to that screen.
-Derek
At 10:36 AM 8/22/2006, unixforums 1 wrote:
I am having several problems loading 6.1 on a Dell PE 850 w/an Adaptec
39160 scsi card and a single scsi drive. When I install from the boot only
cd, I get the error "Unab
On Tuesday 22 August 2006 10:21, Muhammad Omer Iqbal wrote:
> you need add the 2 lines below into the httpd.conf:
>
> AddType application/x-httpd-php .php
> AddType application/x-httpd-php-source .phps
>
> p.s.(by default httpd.conf is in
> /usr/local/etc/apache22/httpd.conf)
You also need to rest
I am having several problems loading 6.1 on a Dell PE 850 w/an Adaptec 39160
scsi card and a single scsi drive. When I install from the boot only cd, I get
the error "Unable to transfer the base distribution from acd0. Do you want to
retry again" and it won't go any further.
When I install usi
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Vizion
> Sent: Tuesday, August 22, 2006 6:14 AM
> To: freebsd-questions@freebsd.org
> Subject: Devices
>
>
> Hi
>
> I have previously reported an inability to get my amd Freebsd
> 6.1 system to re
On 8/22/06, Vizion <[EMAIL PROTECTED]> wrote:
> On 8/21/06, Vizion <[EMAIL PROTECTED]> wrote:
>
> > > The motherboard is a FA-K8N51GMF-9 with 3 hard drives
> > > installed. 2xSata and 1xIDE.
>
> That mobo uses an Nvidia chipset, last I checked the drivers for that
> chipset weren't that great.
>
>
On 8/22/06, Vizion <[EMAIL PROTECTED]> wrote:
On 8/21/06, Vizion <[EMAIL PROTECTED]> wrote:
> > The motherboard is a FA-K8N51GMF-9 with 3 hard drives
> > installed. 2xSata and 1xIDE.
That mobo uses an Nvidia chipset, last I checked the drivers for that
chipset weren't that great.
> > How do I
I have already done that. By doing that, the only difference is that when I
put index.php in the browser, it asks me to download those files instead of
automatically parsing them. However, when I remove those lines, I get them
as .html files.
-Original Message-
From: lveax [mailto:[EMAIL
bois will also die if battery on motherboard because dislodged or
went dead.
open the pc case and look for battery and replace it.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Derek
Ragona
Sent: Tuesday, August 22, 2006 9:28 AM
To: [EMAIL PROTECTED]; freeb
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Vizion
> Sent: Tuesday, August 22, 2006 6:14 AM
> To: freebsd-questions@freebsd.org
> Subject: Devices
>
>
> Hi
>
> I have previously reported an inability to get my amd Freebsd
> 6.1 system to re
On 8/22/06, Muhammad Omer Iqbal <[EMAIL PROTECTED]> wrote:
Thanks. I tried precisely this, and it worked fine. However, what I am
seeing now is that I have index.php, but it is not automatically rendered by
Apache. And when I put it in browser (lets say http://localhost/index.php),
php is not und
i'm no apache guru, but you need to have something like the following
in httpd.conf:
LoadModule php5_modulelibexec/apache22/libphp5.so #in the
modules section
DirectoryIndex index.html index.php index.phtm #so that it gets those
php index files
#File types for php files, so it knows it is
Thanks for the advice. The way I got it to work was by actually making the
package on the local box and it installed fine. In the past, when I tried
it, I was not connected to the Internet and the build failed. I did not
realize that my system must be connected as it needs to fetch some data from
t
Sounds like your motherboard went bad. You can try flashing the BIOS with
a floppy to see if that brings it back.
-Derek
At 10:10 PM 8/21/2006, [EMAIL PROTECTED] wrote:
After moving this computer from one location to another it will not operate
correctly. I get this on screenIRQ
You can go to bootdisk.org or freedos.org and download an iso image to make
a bootable CD. I think you need to first get your system actually booting
a CD of any OS, then move on to installing FreeBSD.
It may be your BIOS isn't booting the CD or you simply have a CD with a bad
boot image. So
Hi
I have previously reported an inability to get my amd Freebsd 6.1 system to
recognize a drive and am wondering if it is because the relevant device node is
not in /dev. having said that I am unsure of what I need to be looking for or
how to create it.
here are the drives I have got:
(NB Phy
stan <[EMAIL PROTECTED]> writes:
> On Mon, Aug 21, 2006 at 10:45:43AM +0800, ke han wrote:
>> Under /var/db/ports you will find directories for each port you have
>> set options for. In each directory, if a file called options exists,
>> remove it...you're all set!!!
>> ke han
>>
> Cool, tha
Giorgos Keramidas wrote:
On 2006-08-21 16:28, beno <[EMAIL PROTECTED]> wrote:
Hi;
I just barely finished upgrading from 5.3 to 6.1 and all is well,
however, now I realize I have to rebuild my kernel again to accommodate
PF. I've edited the correct GENERIC file (I'm on an i386 box).
Don
In response to Petr Juza <[EMAIL PROTECTED]>:
> Hi all,
> I would like to ask you if you resolved finally the problem with svnserve?
> I have the same problem and I don't know how
> to solve it.
You emailed technical mailing list. It's unlikely that anyone remembers
the specific problem you are
In response to Vitaliy Best <[EMAIL PROTECTED]>:
> Where I can to find russian manual of FreeBSD 6.1 on this server?
http://www.freebsd.org/ru/
--
Bill Moran
Collaborative Fusion Inc.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd
i think that you should be able to porce the installation of the
package of php5 with the -f command, after it finished, run pkgdb -F
to fix the dependency of php5 for apacha13 to apache22.
On 8/22/06, Muhammad Omer Iqbal <[EMAIL PROTECTED]> wrote:
Hi,
(Please include me in the reply as I am no
On 8/21/06, Vizion <[EMAIL PROTECTED]> wrote:
> > The motherboard is a FA-K8N51GMF-9 with 3 hard drives
> > installed. 2xSata and 1xIDE.
That mobo uses an Nvidia chipset, last I checked the drivers for that
chipset weren't that great.
> > How do I get the installer select drives interface to re
thanks, I know how to enable pf in freebsd, but is there a difference
between enableing pf via loader.conf or rc.conf?
On 8/22/06, Ericzhao82 <[EMAIL PROTECTED]> wrote:
if you freebsd 6 or newer
1、alter /boot/defaults/loader.conf
"180 pf_load="YES"# packet filter"
2、alter
On Mon, 21 Aug 2006 08:06:44 +0200
Alexander Leidinger <[EMAIL PROTECTED]> wrote:
> Quoting Ion-Mihai Tetcu <[EMAIL PROTECTED]> (from Sun, 20
> Aug 2006 21:47:15 +0300):
>
> > On Sun, 20 Aug 2006 11:19:07 -0700
> > Matt Olander <[EMAIL PROTECTED]> wrote:
> >
> >> Hi all,
> >>
> >> I met with a de
After moving this computer from one location to another it will not operate
correctly. I get this on screenIRQ 3 conflicts on board Can go to
setup screen but then only f1 works and that takes me to a blank screen with a
flashing _???
___
Josh Paetzel wrote:
Does anybody have any experience running FBSD 6.x on a PE850? I'm
specifically wondering about support for their base-configuration
onboard NIC and their CERC SATA RAID controller.
I have not upgraded to 6.x yet, but have been running 5.5 very
successfully on over tw
Hi all,
I would like to ask you if you resolved finally the problem with svnserve? I have the same problem and I don't know how
to solve it.
Thank you very much in advance.
PETER
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
John Oxley wrote in msgid:
<[EMAIL PROTECTED]>
> Hi,
>
> I am playing at being secondary for many domains from a few hosts. Is
> there any way in bind of saying "I trust this guy there, so if he tries
> to give me a domain I will just accept it." or do I have to manually add
> the zone to my lis
Trying to compile and install kde3
on amd64 FreeBSD 6.1-RELEASE #0.
kde3 fails a test and then hangs.
cd /usr/ports/x11/kde3
Make runs fine but then:
# Make Install
terminates and hangs with following consol message:
-
s
I have a strange replication issue since upgrading from the port from
5.0.22 to 5.0.24.
This is all running on FreeBSD 6.1-p3 on two amd64 machines (one single
processor, single core 1GB ram, one dual processor, dual core 6GB ram).
Both running either stock GENERIC or SMP kernel configurations.
On Tuesday 22 August 2006 03:13, David Thompson wrote:
> During boot, does FreeBSD capture the output of /etc/rc anywhere?
>
no, I think...
> dmesg is for the kernel only.
> syslogd is not used to capture simple 'echo' commands from /etc/rc.
>
> If you can't see the physical console as the system
Vitaliy Best wrote:
> Good day!
>
> Tell me please, what version of FreeBSD have russian manpages?
> Or where I can to find russian handbook of FreeBSD?
>
http://www.freebsd.org/ru/
http://www.opennet.ru/
Подпишитесь тоже на рассылку: [EMAIL PROTECTED]
Cheer
On 2006-08-22 18:00, Mikhail Goriachev <[EMAIL PROTECTED]> wrote:
>Giorgos Keramidas wrote:
>>On 2006-08-21 16:28, beno <[EMAIL PROTECTED]> wrote:
>>> make buildkernel
>>> make installkernel
>>> sh /etc/rc.shutdown
>>> pkill sendmail
>>> pkill syslogd
>>> mergemaster -p
>>> make installworld
>>> me
Hello,
Russian handbook:
http://freebsd.org.ru/handbook/
--
Best regards,
Alex
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Giorgos Keramidas wrote:
> On 2006-08-21 16:28, beno <[EMAIL PROTECTED]> wrote:
>> Hi;
>> I just barely finished upgrading from 5.3 to 6.1 and all is well,
>> however, now I realize I have to rebuild my kernel again to accommodate
>> PF. I've edited the correct GENERIC file (I'm on an i386 box).
>
Good day!
Tell me please, what version of FreeBSD have russian manpages?
Or where I can to find russian handbook of FreeBSD?
--
All the best
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mai
ke han wrote:
> I am about to purchase a new server for FreeBSD 6.1. For rebuilding
> world, I will need secure remote access to the server while booting
> in order to startup in single user mode.
> What solutions do other user recommend for this? Any particular
> favored than others? Spec
Hi,
I am playing at being secondary for many domains from a few hosts. Is
there any way in bind of saying "I trust this guy there, so if he tries
to give me a domain I will just accept it." or do I have to manually add
the zone to my list of secondaries. (By manually I mean a webpage or a
cron j
Hi Dave,
I've run into stuff like this from time to time with various interfaces
under
FreeBSD. I've also run into it with ethernet connections under Windows.
I've also run into it with Cisco-to-Cisco gear. For example if you dig
around
on Cisco conneciton online, you will find a known bug abo
On 2006-08-21 16:28, beno <[EMAIL PROTECTED]> wrote:
> Hi;
> I just barely finished upgrading from 5.3 to 6.1 and all is well,
> however, now I realize I have to rebuild my kernel again to accommodate
> PF. I've edited the correct GENERIC file (I'm on an i386 box).
Don't edit GENERIC. It's very r
The released iso file marked FreeBSD-6.1 is the stable release.
There have been errata (patches) to apply since its release, but
FreeBSD does not build a new iso for these patches.
So, you can consider the 6.1 iso available from the download page to
be the stable version. As you become more
On Tue, Aug 22, 2006 at 06:38:46AM +0100, Matthew Seaman wrote:
> Lowell Gilbert wrote:
> > Garrett Cooper <[EMAIL PROTECTED]> writes:
> >
> >> Gerard Seibert wrote:
> >
> >>> IMHO, it might be a lot easier for him to use portsnap. Especially
> >>> if he is not familiar with the FBSD ports system
Good day!
I want to download FreeBSD 6.1. from
ftp://ftp2.ru.FreeBSD.org/pub/FreeBSD/
ftp server. I need STABLE vershion of FreeBSD 6.1.
Because earlier I did't used FreeBSD operation system of freeBSD and other
Unix operation system, I need your help.
94 matches
Mail list logo
