Well...
If there was an easy way to restrict users to their home directories using
SCP or SCPONLY, I would love that instead.
I don't really feel like installing an FTP server just so users can
connect to my server when they are already used to using sftp-server.
Is there anyway?
-Matt
On
Robert C Wittig wrote:
> Rob Gabaree wrote:
>> Thanks.
>>
>> What I did was remove all lines except `sendmail_enable="NO"` and in
>> /etc/mail/aliases, I setup the root alias to goto my real email address:
>>
>> root [EMAIL PROTECTED]
>>
>> I setup my firewall to block incoming/outgoing email on po
On Sun, Sep 24, 2006 at 05:18:27PM -0400, Rob Gabaree wrote:
> Hi,
>
> I have a remote server that I don't plan on using for email as I have
> another server to handle that. My question is.. is it a bad idea to
> _completely_ disable sendmail on that machine? Right now /etc/
> rc.conf has:
On Sun, Sep 24, 2006 at 05:49:59PM -0700, backyard wrote:
> I thought if you went to the options in sysinstall and
> go to the part that says Release Name and it likely is
> going to say 5.3-RELEASE change that to 6.1-RELEASE
> and then do an ftp install. You should get the newer
> version of the
From: "Jack Stone" <[EMAIL PROTECTED]>
To: freebsd-questions@freebsd.org
Subject: Recompiling base sendmail with another DB
Date: Sun, 24 Sep 2006 17:59:54 -0500
I've wanted to test the use of some of snertsoft's milters, but they
require a Berkley DB-4.1+ I believe instead of the 1.85 used by t
--- Jason Artz <[EMAIL PROTECTED]> wrote:
>
>
> --- "Chad Leigh -- Shire.Net LLC" <[EMAIL PROTECTED]>
> wrote:
>
> >
> > On Sep 23, 2006, at 2:34 PM, Jason Artz wrote:
> >
> > > Hello,
> > >
> > > I want to install FreeBSD 6.1 on my system, but
> I
> > only
> > > have a version 5.3 CD. I c
Hello,
I`m trying to configure my hp deskjet 520 and i`m running into some
trouble.
The handbook says it all has to do with the interupt driven
configuration, it does not work with some new hp printers.
I have to switch to the polled mode.
"If you want polled mode, remove in your /boot/devic
Rob Gabaree wrote:
Thanks.
What I did was remove all lines except `sendmail_enable="NO"` and in
/etc/mail/aliases, I setup the root alias to goto my real email address:
root [EMAIL PROTECTED]
I setup my firewall to block incoming/outgoing email on ports 21/25 as
well, so no one on the outsi
I've wanted to test the use of some of snertsoft's milters, but they require
a Berkley DB-4.1+ I believe instead of the 1.85 used by the base system's
sendmail.
Somewhere I read about recompiling sendmail, which then would allow me to
comile with a different DB choice. The steps are below.
W
Hi;
I've installed the py-ldap from the ports doing the "make install clean" dance.
Everything seemed to proceed smoothly. However, when I fired up my python
interpreter and entered "import ldap" it didn't recognize the module. So
something went wrong and I don't know what :( I did get this from
i was noticed this behavior using make on freebsd and netbsd :
[EMAIL PROTECTED] cat Makefile
all:
pwd
[EMAIL PROTECTED] make
pwd
/usr/home/ohmer
[EMAIL PROTECTED] mkdir obj
[EMAIL PROTECTED] make
pwd
/usr/home/ohmer/obj
it seems a hard coded make behavior so it rather looks like a featur
Thanks.
What I did was remove all lines except `sendmail_enable="NO"` and in /
etc/mail/aliases, I setup the root alias to goto my real email address:
root [EMAIL PROTECTED]
I setup my firewall to block incoming/outgoing email on ports 21/25
as well, so no one on the outside can access mail
On Sep 24, 2006, at 2:38 PM, Michael Eubanks wrote:
On Sat, 2006-09-23 at 12:51 -0700, Chris wrote:
Are there any official patches to support multiple IPs in jails or
would I be limited to taking a chance with the few 6.1 patch files
I suppose you could alias your primary network interface, th
Rob Gabaree wrote:
> I have a remote server that I don't plan on using for email as I have
> another server to handle that. My question is.. is it a bad idea to
> _completely_ disable sendmail on that machine?
Yes.
You probably want to allow the server to send you administrative mail
that
On Sat, 2006-09-23 at 12:51 -0700, Chris wrote:
> Are there any official patches to support multiple IPs in jails or
> would I be limited to taking a chance with the few 6.1 patch files
> I've found on the net. I searched the UPDATING on HEAD and for
> anything that might be related but found
Hi Matt!
If you are talking about givin FTP access only, then
the easiest way to do it is just adding the user to the file
/etc/ftpchroot
and thats all!!
if the file does not exist. then create it.
add to /etc/ftpchroot all users that you want them to ftp but never see
any upper level of
O. Hartmann wrote:
> Armin Pirkovitsch wrote:
>> O. Hartmann wrote:
>>
>>> Sorry, maybe a little bit off-topic here.
>>>
>>> I tried using GAIM as IM, but ran into trouble. Receiving documents is
>>> working, but with or without any kind of firewall sending files is not
>>> possible.
>>>
>>> The
On Sun, Sep 24, 2006 at 05:18:27PM -0400, Rob Gabaree wrote:
>
> So what should I do? Should I just have "sendmail_enable="NO"" in /
> etc/rc.conf, so only the incoming mail service is disabled? That way
> messages could be sent without the above errors? Or what?
You should allow the system
I have the same four lines in rc.conf, but that is
because I installed postfix.
If you want to disable it completely, you'd use
sendmail_enable="NONE", but you wouldn't be able
receive messages sent by crontab, syslogd, etc.
Michael
--- Rob Gabaree <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I have a
On Sat, 2006-09-23 at 12:51 -0700, Chris wrote:
> Are there any official patches to support multiple IPs in jails or
> would I be limited to taking a chance with the few 6.1 patch files
> I've found on the net. I searched the UPDATING on HEAD and for
> anything that might be related but found
Armin Pirkovitsch wrote:
O. Hartmann wrote:
Sorry, maybe a little bit off-topic here.
I tried using GAIM as IM, but ran into trouble. Receiving documents is
working, but with or without any kind of firewall sending files is not
possible.
The GAIM installation is as is taken from the ports c
[EMAIL PROTECTED] wrote:
Hi!
I saw your posts with title "Performance issue amd64". I don't know if this
could help, but I'm having the same problem with ICH5 SATA controller and the
same Hitachi drives on linux. I cannot activate DMA, and bandwidth is lesser
than 10MB/s. I could n
On Sun, Sep 24, 2006 at 02:12:24PM -0700, Jason Artz wrote:
> Is there a way to do a binary install instead of
> downloading all the new sources and compiling them as
> an upgrade?
Sort of. You can do it by hand if you're careful (the install files
-- base.aa, etc -- are just .tar.bz2 files cut
Hi,
I have a remote server that I don't plan on using for email as I have
another server to handle that. My question is.. is it a bad idea to
_completely_ disable sendmail on that machine? Right now /etc/
rc.conf has:
sendmail_enable="NO"
sendmail_submit_enable="NO"
sendmail_outbound_ena
--- "Chad Leigh -- Shire.Net LLC" <[EMAIL PROTECTED]>
wrote:
>
> On Sep 23, 2006, at 2:34 PM, Jason Artz wrote:
>
> > Hello,
> >
> > I want to install FreeBSD 6.1 on my system, but I
> only
> > have a version 5.3 CD. I can tell sysinstall to
> get
> > 6.1 instead of 5.3 via FTP (under "Option
Guys,
This may/may not prove the superiority of BSD over the Linux
kernel, dunno. Maybe you can help me figure out what I
need to tune; or (*sob*) lighten my load on ethos.
I've got three of the 4 default workspaces full of apps.
Mostly xterms
Hi!
I saw your posts with title "Performance issue amd64". I don't know if this
could help, but I'm having the same problem with ICH5 SATA controller and the
same Hitachi drives on linux. I cannot activate DMA, and bandwidth is lesser
than 10MB/s. I could not solve the problem, unti
On 9/24/06, Dan Nelson <[EMAIL PROTECTED]> wrote:
Once the kernel decides to swap a page, that area of swap is reserved
until the process exits, even if the kernel pulls the data back from
swap. That way if memory gets low again, the kernel knows it can
quickly discard the in-RAM copy of the dat
O. Hartmann wrote:
> Sorry, maybe a little bit off-topic here.
>
> I tried using GAIM as IM, but ran into trouble. Receiving documents is
> working, but with or without any kind of firewall sending files is not
> possible.
>
> The GAIM installation is as is taken from the ports collection, firewa
Sorry, maybe a little bit off-topic here.
I tried using GAIM as IM, but ran into trouble. Receiving documents is
working, but with or without any kind of firewall sending files is not
possible.
The GAIM installation is as is taken from the ports collection, firewall
disabled ... Tried ICQ/MS
In the last episode (Sep 24), Pietro Cerutti said:
> 512 MB of Ram, 1024 MB of swap, 6.1-STABLE
>
> After some time my system begins swapping, which is normal.
> The weird thing is that swapping goes on even after closing the memory
> consuming programs.
>
> here's the output of top(1):
>
> Mem:
Hi list,
512 MB of Ram, 1024 MB of swap, 6.1-STABLE
After some time my system begins swapping, which is normal.
The weird thing is that swapping goes on even after closing the memory
consuming programs.
here's the output of top(1):
Mem: 103M Active, 37M Inact, 107M Wired, 6656K Cache, 60M Buf,
On Sun, 24 Sep 2006 15:09:23 -0400 (EDT)
Matt Juszczak <[EMAIL PROTECTED]> wrote:
> I would like to give a user access to my box via some kind of FTP but
> restrict him to his home directory.
>
> I have seen scponlyc, which supposedly can do this, but can't seem to
> get it working.
and what do
Hello Matt,
Matt Juszczak wrote:
Hi all,
I would like to give a user access to my box via some kind of FTP but
restrict him to his home directory.
I have seen scponlyc, which supposedly can do this, but can't seem to
get it working.
I have also read up on protftpd + ssl, and configuring i
On 9/24/06, Ivan Rambius Ivanov <[EMAIL PROTECTED]> wrote:
Hello,
After an year of successful using of FreeBSD, a friend of mine asked
me to install it on her laptop. The laptop is Pestigio Visconte 120
with Intel 855 chipset.
I installed FreeBSD 6.1 and run X with only one problem. The mouse
p
Hi all,
I would like to give a user access to my box via some kind of FTP but
restrict him to his home directory.
I have seen scponlyc, which supposedly can do this, but can't seem to get
it working.
I have also read up on protftpd + ssl, and configuring it to lock users
into their home di
ajm ha scritto:
> On Sat, Sep 16, 2006 at 11:57:35AM +0200, Erik Trulsson wrote:
>> On Sat, Sep 16, 2006 at 03:20:00PM +0530, Girish Venkatachalam wrote:
>>> Hello,
>>>
>>> I want a simple tool that can be used for preparing block diagrams and
>>> arrows, that is all. I want to be able to u
Hello,
After an year of successful using of FreeBSD, a friend of mine asked
me to install it on her laptop. The laptop is Pestigio Visconte 120
with Intel 855 chipset.
I installed FreeBSD 6.1 and run X with only one problem. The mouse
pointer in X is not a normal arrow, but a white big square. I
I see that in /var/log/messages I am getting messages like the
following...
Sep 24 13:08:36 tx kernel: calcru: negative runtime of -604849 usec
for pid 16 (yarrow)
Sep 24 13:08:36 tx kernel: calcru: negative runtime of -604842 usec
for pid 16 (yarrow)
Sep 24 13:08:38 tx kernel: calcru: nega
Hi:
I have a laptop with a built in webcam:
ugen0: Vimicro Corp. USB2.0 Web Camera, rev 2.00/1.00, addr 2
Since this goes on the generic usb device, I guess there is no driver.
Is this supported? Do I need to download a driver somewhere or will
webcam software provide it?
Secondly, what s
On 9/22/06, RJ45 <[EMAIL PROTECTED]> wrote:
Hello,
I installed sympa5 from the FreeBSD ports collection.
I am running FreeSBD 6.1
The problem is that the main sympa web interface does not show me the
language options, so I cannot choose a language, and also the language
menu is filled of spaces
On Sep 24, 2006, at 5:26 AM, m.shenven wrote:
[EMAIL PROTECTED]>
< serial and UART Tutorial, by Frank Durda >
Sirs,
Where on the Internet can I details of: How to program a
WINDOWS XP computer so that in will input/output to an external
device through its SERIAL PORT?
ANY information you c
On 24/9/06 13:52, "Ansar Mohammed" <[EMAIL PROTECTED]> wrote:
>> Does it dance the Sun Ray dance, or are we back to rolling our own?
>>
>> Ceri
>
>
> Huh?
> Clearly, its not as attractive as a Sun Ray. But I dunno about dancing and
> rolling..
Does it work with Sun Ray server?
Ceri
--
That m
David Bila wrote:
> Dear All,
>
> Im triyng to get NFS installed in one of my FreeBSD server so I can share
> some folders on it and be able to save documents on the shared folders
> remotely. I did all the configuration both in the server and the client.
> When I try to mount the exported fold
--- Vo¹tenák Vladimír <[EMAIL PROTECTED]> wrote:
> Hi
>
> I have an old HP NETSERVER PRO 2xpentium pro, 256 MB
> ram,
> and I tried to install the actual FREEBSD 6.1 there.
> I made 3
> floppies: boot, kernel1 and kernel2. When it starts
> booting from
> the boot floppy, the loader show I o
Dear All,
Im triyng to get NFS installed in one of my FreeBSD server so I can share
some folders on it and be able to save documents on the shared folders
remotely. I did all the configuration both in the server and the client.
When I try to mount the exported folders I get a message saying Per
I'm using FreeBSD 6.1 (by way of PC-BSD 1.2) and I'm trying to
get my ATI x850 card to work with dual monitors. I have the
xorg.conf set up correctly (see my blog post on the long hard
battle to get that beachhead secured here:
http://freebsd.amazingdev.com/blog/archives/000744.html
)
but now I
On 9/23/06, Steve Roome <[EMAIL PROTECTED]> wrote:
Hi, I've noticed a lot of people trying to get radeons with R300 and
newer cores working with FreeBSD and 3D acceleration. At least there's
been a fair few unanswered requests for it for a while now.
So, does anyone know when the newer ati drive
> Does it dance the Sun Ray dance, or are we back to rolling our own?
>
> Ceri
Huh?
Clearly, its not as attractive as a Sun Ray. But I dunno about dancing and
rolling..
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/li
On 9/24/06, m.shenven <[EMAIL PROTECTED]> wrote:
[EMAIL PROTECTED]>
< serial and UART Tutorial, by Frank Durda >
Sirs,
Where on the Internet can I details of: How to program a
WINDOWS XP computer so that in will input/output to an external device through
its SERIAL PORT?
ANY information you can
[EMAIL PROTECTED]>
< serial and UART Tutorial, by Frank Durda >
Sirs,
Where on the Internet can I details of: How to program a
WINDOWS XP computer so that in will input/output to an external device through
its SERIAL PORT?
ANY information you can supply, would bew greatly appreciated !
m.shenv
Peter Schuller wrote:
> Hello,
>
> I am using pf on a 6.1 machine. I have a tunneling interface (gif0) for my
> IPv6 feed. The problem I am having is connecting to myself in spite of
> firewalling.
>
> I am allowing traffic on port 22 to my public ipv6 address. I am also
> allowing
> all outg
Hello,
Does anyone know if TCP-MD5 is working with OpenBGP on Freebsd ?
I've got a Freebsd 6.1 system (6.1-RELEASE-p5) on which I've tried both
openbgpd and openbgpd-devel.
The system has a test session now with a Cisco 3750 equipment.
On the OpenBGPD machine I have setup the Cisco neighbo
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to freebsd-questions@freebsd.org with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the maili
54 matches
Mail list logo