by Outblaze
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
/
Fdisk, label and the rest of install went fine, but on reboot I get the
following error:
Disk error 0x1 (lba=0x21fc09f)
No /boot/loader
FreeBSD/i386 BOOT
Default: 0:ad(0,a)/kernel
boot:
If I hit enter, it spits out this error:
WARNING: loader(8) metadata is missing!
and starts
hope I dont have to format and
reinstall.
Saying something about Soft Update Problem.
Any ideas??
Thanks for you help,
Bruce
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
to 4.10. Also,
is 5.2.1 faster or is 4.10 faster and more stable.
Thanks,
Bruce
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/configtuning-virtual-hosts.html
KeS
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I am running FreeBSD 4.9 RELEASE running the standard ftpd. I can act as an
ftp client from the console OK, however when I try to ftp from a client PC
to the server running ftpd (which is running ipfw) the ftp server receives
the packet sent to port 21 and replies however it will not initiate
' to switch to root. Is there any reason why I
should configure my system so that I can telnet in directly as root?
Thanks.
Regards,
J.S.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Dear FreeBSD users,
I urgenly need to connect 192.168.1.* network to the internet. What am I
doing wrong?
I have 2 networks, 192.168.0.* and 192.168.1.*
FreeBSD 5.1 is connected to both networks via 2 network cards, its ip is
192.168.0.3 and 192.168.1.2.
As of now from the 192.168.1 network I
You forgot natd.
Am guessing your DSL or cable modem is doing NAT and assigning an
address to your FreeBSD system.
No the modem assigns IP to the 192.168.0.1 router, which in turn acts as
gateway for the rest of the network. I only have 1 real IP address. It
seems I have NAT already
at 21:33:43 -0400,
[EMAIL PROTECTED] wrote:
Dear FreeBSD users,
I urgenly need to connect 192.168.1.* network to the internet. What
am I doing wrong?
You're assuming it's possible. It's not. Addresses in the range
192.168.x.x are explicitly not routed. See RFC 1918
(http://www.cis.ohio
as to what I can do?
Thanks,
Jason
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hello everybody,
I have FreeBSD 4.8 installed on an AMD thunderbird 800 and i am using gnome.
everytime i start gnome, i get the error message \cant open /dev/sound/mixer\.
There is a Sound Blaster 128 Pro PCI installed in the box, but neither does /dev/sound
exist, nor can i spot anything
PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Dan Pelleg wrote:
Gunnar Flygt [EMAIL PROTECTED] writes:
Has anyone any experience from running any virus scanners on a FreeBSD
Samba server? The server is serving mostly MS-workstations, so the
scanner should be proficient in finding the most common viruses in the
M$ world.
Any information
Schimcek, Derrick wrote:
I have a FreeBSD 5.0 and a FreeBSD 5.2 box both running recent versions of f-prot antivirus when you run the virus def updater through cron it gets halfway through the scripts and then dies. When you run it from the command line it runs correctly. so I wrote my own script
Im trying to get an Intel-based box to boot on a FreeBSD 5.1 kernel (generic) yet I
seem to be having issues doing this. I am using a SATA drive and frankly, Im unable
to find anything on google. Here's the output from dmesg for the SATA device:
atapci1: Intel ICH5 SATA150 controller port
list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
even less.
Help and/or suggestions are most definitely appreciated.
Brad Waite
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi all,
I've just upgraded my FreeBSD 5.2-CURRENT box to Gnome 2.6. Something has gone wrong,
for Evolution 1.4.6_1 doesn't display my e-mails. It does recognize my mboxes, it does
display the treeview with my folders, however the panel that should be listing the
messages is empty. I guess
.
Sometimes Freebsd cannot detect the IDE drive unless i fiddle with bios settings, I
have been unable to determine
the bios setting causing this since it seems to be different every time i change
something. The error
i get during boot up is below.
ad0: hard error reading fsbn 3173121 of 0-3 (ad0 bn
gallery of most of the freebsd games
ports which I hope to upload shortly if anyone's interested.
-
Everyone should have http://www.freedom2surf.net/
0verkill-0.16
4va-1.21
9e-1.0
AbiWord-gnome-1.0.5
BitchX-1.0c19_3
FlightGear-0.9.1_3
GiNaC-1.0.14
My ldconfig -r is attached.
-
Everyone should have http://www.freedom2surf.net/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
://www.freedom2surf.net/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
;/
Not much help I'm afraid, good luck anyway.
--
Jez
http://www.munk.nu/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
--
Dr Seuk
instructions for this on FreeBSD (I'm new to java).
Thanks in advance,
--
Dr Seuk
-
Everyone should have http://www.freedom2surf.net/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
- Original Message -
From: Mark [EMAIL PROTECTED]
To: FreeBSD [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 11:36 PM
Subject: Re: POP Before SMTP
Glad to hear everything is okay. But are you sure you do not want to give
that recompile thingy a try? :) We are at qpopper 4.0.5
got them to work with my popauth and qpopper programs and all is well ;P
Thanks!
- Original Message -
From: Jamie [EMAIL PROTECTED]
To: FreeBSD [EMAIL PROTECTED]
Cc: FreeBSD-Questions [EMAIL PROTECTED]
Sent: Friday, August 08, 2003 5:32 PM
Subject: Re: POP Before SMTP
Sure, here
- Original Message -
From: Jamie [EMAIL PROTECTED]
To: FreeBSD [EMAIL PROTECTED]
Sent: Friday, August 08, 2003 1:19 PM
Subject: Re: POP Before SMTP
I havent heard of SASL before. Do you have a URL and I will definitly check
it out - so far all my searches are dry =/ TIA
Hmmm
PROTECTED]
Sent: Friday, August 08, 2003 1:06 PM
Subject: Re: POP Before SMTP
http://www.google.com/search?q=pop+before+smtp+sendmail
On Fri, 8 Aug 2003, FreeBSD wrote:
Does anyone have any URL's for POP Before SMTP setup for sendmail?
I'm on Fbsd4.8 with the current Sendmail 8.12.8. I havent
that I'm
trying to do now. Thanks for the info!! ;P
- Original Message -
From: Mark [EMAIL PROTECTED]
To: FreeBSD [EMAIL PROTECTED]; FreeBSD-Questions
[EMAIL PROTECTED]
Sent: Friday, August 08, 2003 4:01 PM
Subject: Re: POP Before SMTP
- Original Message -
From: FreeBSD [EMAIL
are up to date with the ports btw.
Cheers.
--
Dr Seuk
-
Everyone should have http://www.freedom2surf.net/
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
it at all.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I finally managed to get the first disc of 5.1-RELEASE downloaded and verified
the md5 hash for it. I burned the image to a cd and rebooted. I then
remembered that my computer for some unknown reason refuses to boot FreeBSD
cds (doesn't matter which version, yet it has no problem booting my
a monitor attached to the machine.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
the last day, so it's probably something
that's been changed, but I'm to novice to understan what.
I am running 5.0p7 now.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
I installed 5.0 when I first tried out freeBSD this spring, and after
some months of testruns I'm still very impressed and will choose freeBSD
as our *nix clone standardized OS.
Unfortunately everywhere I look and read the recommendation is to go
with 4.8 not 5.x, and especially would I like
that it gets most impact.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
, however it works for me know so I'm pleased again! ;)
On Sat, 2003-06-28 at 00:04, freeBSD wrote:
I have run into a strange problem:
Suddenly has my nic no routingtables so name lookups etc doesn't work.
The only solution is to SU and kill routed and then start it again.
Everything
I haven't been able to turn up anything under Google...
Has anyone ever successfully gotten an IP-IP or GRE tunnel working
between a FreeBSD machine (4-STABLE) and a Linux machine (2.4.x)? I
can get a tunnel up between two FreeeBSD machines no problem, but not
between the two OSes
Hi,
(freebsd newbie)
I've installed postfix from ports. At the end of the
installion script I was asked if it should modify the
/etc/mail/mailer.conf file which I answered with yes!
My question is, how is postfix started? It did not install
a .sh file in /usr/local/etc/rc.d.
Is still started
Hi,
(freebsd newbie)
I've tried freebsd for a few month now and now I would like
to use it as an anti-spam server.
I installed postfix and spamassassin from the
ports-collection.
The server should only check every [EMAIL PROTECTED]
incoming mail against spamassassin and after having checked
Hi all,
i have a following problem, probably someone was through this before and
can offer advice.
Now i'm using DSL with static ip address and on my home FreeBSD server
there is group of servers serving my family and friends. Servers are qmail,
djbdns and apache.
I'm doing dns for my domain, mail
Hi,
Yesterday, I was upgrading some KDE dependencies using portupgrade. Since then
make fails for *every* port.
uname -a
FreeBSD gandalf 5.3-RELEASE-p1 FreeBSD 5.3-RELEASE-p1 #9: Wed Dec 29 19:29:37
UTC 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYKERNEL.686.5.3 i386
e.g.,
cd /usr/ports
from outside, but i'm not
sure, this will solve all my problems ;-).
DNS server is also sitting in LAN, on different IP, than he is
claiming is his DNS responses.
--
freebsd(at)beke.info
___
freebsd-questions@freebsd.org mailing list
http
://lists.freebsd.org/pipermail/freebsd-ports/2004-September/015879.html
Failure in portsdd -Uu), but it's not clear (at least to me :-) what's
causing them.
Cheers,
Kris
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi everyone,
I have a box with FreeBSD 4.7-RELEASE.
I'm configuring the X Server and I have some
problems with the resolution.
When X starts I get the wrong resolution. I run
xvidtune in the console and then I press Next in
the window that opens, till I get the right
not working I had little
choice) - namely pull down a binary base distribution, cat all the base.aa,
base.ab etc. files together, untar them and copy libcrypto.so.3 back.
Luckily it worked.
Thanks Kris and others for your help
___
freebsd-questions
thing within the context of the
php5-extensions meta-port implementation?
cd to /usr/ports/lang/php5-extensions
make config
select unixODBC
make install clean
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
firewire. I just am
not sure I can do all of that while running on a 4.10 system...
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
-Ursprungligt meddelande-
Från: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] För Ashley Moran
Skickat: den 8 december 2005 16:05
Till: freebsd-questions@freebsd.org
Ämne: Re: Send emails with attachments from command line
On Thursday 08 December 2005 13:35, Igor Robul wrote:
On Thu, Dec
hi everyone,
I'm looking for a new, gruntier laptop. What laptop is known to work
WELL with freeBSD? e.g.:
ACPI with no problems (and as many features as possible)
PATA / SATA with no problems
all other basic stuff (graphics, NIC, Wireless g, sound,
touchpad ,etc ) should work too, of course
Hi,
I ran into a problem that I don't know how to diagnose.
I got a FreeBSD 6.0 box using an Adaptec SATA (fake)RAID 1210SA. Two 250
GB Maxtor hard drives are connected to this card, as a RAID1 mirror, and
the resulting filesystem is correctly mounted and NFS exported.
When the traffic rises
to copy over master.passwd and remove all system accounts everytime I
add an account. I know there has to be an easier way.
I am running FreeBSD 6.1(Current Branch)
Thanks for your time,
Freesbie
___
freebsd-questions@freebsd.org mailing list
http
installing 6.0, and enabling ACPI when
booting. Without, at least my panics, but acpi_load=YES in loader.conf
to the resque!
--Ville
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
either. When loading the if_iwi module, I get output that confirm
it's loading ok. But I don't know how to read all the verbose output that
well - I try to get it online so maybe someone can help me?
--Ville
___
freebsd-questions@freebsd.org mailing list
[EMAIL PROTECTED] wrote:
Hi,
Is there somehow a tool (in the ports) to capture a (KDE-) desktop of
FreeBSD while doing a presentation of some kind of software to create
a movie of this, for example as a *.avi file?
I've looked through /usr/ports/multimedia but did not see any tool
which could
?
Vincent Goupil
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi all,
I have FreeBSD 5.1-RELEASE installed.
When I try to portupgrade textproc/libxml2 I get the following error:
pkg_info: /var/db/pkg/gnome-2.4.0/+CONTENTS: No such file or directory
Actually, I've been trying to portupgrade some GNOME related ports and this
is a recurrent error.
ls /var
)
generic video card
onboard intel nic
FreeBSD dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org
Hi,
I already configured the XFree86 on my FreeBSD system and I want to run
the KDE or Gnome desktop applications. How is this possible.
I appreciate your help. Totally newbie here :)
Thanks.
Cheers,
Mazen S. Alzogbi
www.mazenalzogbi.com
Gautam and Bernard,
Thank you for your instant help. I will try that as soon :)
Cheers,
Mazen
On Tue, Jan 06, 2004 at 03:04:48AM -0800, [EMAIL PROTECTED]
wrote:
Hi,
I already configured the XFree86 on my FreeBSD system and I want to
run the KDE or Gnome desktop applications. How
to allocate the freebsd slice, it reports
155061/16/63 ad4
and says the geometry is invalid
If I go ahead and attempt to partition, I see
Geometry ad4 9729 cylinders/255 heads/63 sectors = 156296385 sectors
(76316MB)
Offset Size(St)End
Subhro wrote:
When I boot off a CD (image created from downloaded iso image),
start the install, and go to allocate the freebsd slice, it reports
155061/16/63 ad4
and says the geometry is invalid
What does the sticker on top of the drive say about its geometry. I
would like to explicitly
of the drive? I would like to check the
hardware literature.
Seagate ST380013AS
http://www.seagate.com/support/disc/manuals/sata/cuda7200_sata_pm.pdf
Thanks again.
Gary
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
Hi everyone,
I'm having troubles configuring my mouse for the X server.
So, here's my story. I have a PIII 950MHz box with 128MB RAM. I have
Windows98 on it and right now I'm turning it to dual boot with FreeBSD
4.7-Release being the second o.s.
The installation itself went easy but setting up
:37 -0400 Bill Moran Ýãñáøå:
[EMAIL PROTECTED] wrote:
Hi everyone,
I'm having troubles configuring my mouse for the X server.
So, here's my story. I have a PIII 950MHz box with 128MB RAM. I have
Windows98 on it and right now I'm turning it to dual boot with FreeBSD
4.7-Release being
PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Good Morning!
I have a simple tunnel established between two FreeBSD machines. The
tunnel is encrypted using IPSEC and Racoon. Prior to 5.3-*, I have never
experienced any issues with it.
Using the same configuration in 5.3-*, the tunnel is still established and
simple traffic can be sent across
and one was at 1x.
Eddie
-Original Message-
From: Chad Leigh -- Shire.Net LLC [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 06, 2004 10:51 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: FreeBSD 5.3 Release and Dell Poweredge 6450 Install issues
On Nov 6, 2004, at 11:43
Gunter Wambaugh wrote:
On Jul 16, 2005, at 1:53 AM, e-mail for freebsd wrote:
Hi,
I have installed FreeBSD 5.4 (from CD) onto a ThinkPad A21. I also have
Win2Kpro on this laptop. FreeBSD is installed at about the 7G mark
on the
harddrive.
I had 4.3 installed previously, and thought I
-imapd22/work/cyrus-imapd-2.2.10/perl
### Making install in
/var/build/ports/mail/cyrus-imapd22/work/cyrus-imapd-2.2.10/perl/imap
Installing
/usr/local/lib/perl5/site_perl/5.6.1/i386-freebsd/auto/Cyrus/IMAP/IMAP.so
Files found in blib/arch: installing files in blib/lib into architecture
dependent
Hi everyone,
Is there a Firefox version for Freebsd or must we use the one for Linux?
thanks,
Dimitris
-
http://www.mail.gr/ - Get Your Private Free Email Address!
http://www.ringtone.gr/ - Ringtones Logos for your mobile
thanks for answering everyone :^) I really appreciate it.
the thing is, I use FreeBSD 4.7 and I was thinking about the latest
version of firefox.
greetings,
Dimitris
-
http://www.mail.gr/ - Get Your Private Free Email Address!
http
point,
but something like a Netscaler or Foundry ServerIron are what the big
websites generally use).
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
with
amd64). Is this a normal error in this case?
Thank you for your quick reply.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
andrew clarke mail_ozzmosis.com said (on 2008/10/29):
You need to understand that the FreeBSD project by its nature is
primarily source-code driven. Making packages available (of any port)
is of very low priority in comparison to the rest of the system
(testing, documentation, etc
+20569+/usr/local/www/db/text/2008/freebsd-hardware/20080727.freebsd-hardware
and my past experiences I'm a bit concerned unless someone can vouch for it.
Barring that, can someone suggest a low power (particularly when idle) core
2 duo processor mobo combination?
Thanks,
Gary
Hi everyone,
I have a FreeBSD 7.0-Release server that started to swap after an error
in a shell script (process spawning competition ;-) ). I killed the
shell and the RAM is now OK. The problem is that the swap is still used.
How can I reset the swap?
Thanks for sharing your knowledge
Daniel Bye a écrit :
On Thu, Dec 18, 2008 at 10:28:18AM -0600, Kirk Strauser wrote:
On Thursday 18 December 2008 09:16:10 FreeBSD wrote:
Hi everyone,
I have a FreeBSD 7.0-Release server that started to swap after an error
in a shell script (process spawning competition ;-) ). I killed
Daniel Bye a écrit :
On Thu, Dec 18, 2008 at 12:02:06PM -0500, FreeBSD wrote:
Daniel Bye a ?crit :
On Thu, Dec 18, 2008 at 10:28:18AM -0600, Kirk Strauser wrote:
On Thursday 18 December 2008 09:16:10 FreeBSD wrote:
Hi everyone,
I have a FreeBSD 7.0-Release server that started to swap after
RW a écrit :
On Thu, 18 Dec 2008 15:13:12 -0500
FreeBSD free...@optiksecurite.com wrote:
I can't see any process within parentheses in top... I also looked at
the -f option of ps but the process that caused the swapping are not
listed.
FreeBSD only swaps in extreme cases - most
Jerry McAllister a écrit :
On Thu, Dec 18, 2008 at 12:02:06PM -0500, FreeBSD wrote:
Daniel Bye a écrit :
On Thu, Dec 18, 2008 at 10:28:18AM -0600, Kirk Strauser wrote:
On Thursday 18 December 2008 09:16:10 FreeBSD wrote:
Hi everyone,
I have a FreeBSD 7.0-Release
Tom Worster a écrit :
On 12/19/08 10:37 AM, FreeBSD free...@optiksecurite.com wrote:
Because this server is monitored by Nagios and it emails me every hour a
warning because the swap is not 100% free (I know it's pretty extreme,
but I want to know if the system is swapping
Help, I'm in southern Ontario and I have 20cm of snow on my freebsd
7-release server.
IT seems to be causeing some http outages.
My FBSD 6-.0 doesn't seem to be affected thou.
You probably can't use a standard 7-release.
You have to build a custom kernel with LATITUDE set.
It causes igloo
Hi everyone,
I'm having difficulties trying to clone a FreeBSD 7.1 PC to another
exact same PC over SSH.
There is my the things I tried:
I found that link http://devpit.org/wiki/Dump_and_Restore_over_SSH which
seemed exactly what I wanted. The problem is that FreeSBIE is not
working
Le 09-01-19 à 12:46, Roland Smith rsm...@xs4all.nl a écrit :
On Mon, Jan 19, 2009 at 12:34:26PM -0500, FreeBSD wrote:
My question is how do you clone PC over SSH (it would be too much a
PITA
to open each case to plug the HD directly in the source PC).
Would it have to be ssh? Why
Odhiambo Washington a écrit :
On Tue, Jan 20, 2009 at 2:03 AM, Roland Smith rsm...@xs4all.nl
mailto:rsm...@xs4all.nl wrote:
On Mon, Jan 19, 2009 at 05:43:56PM -0500, Freebsd wrote:
Sounds pretty interesting to me but i couldn't test right now. As nc
is in /usr/bin how
++ on the
same IRQ?
Thank you for your help,
Martin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
FreeBSD a écrit :
Hi everyone,
Just to put you in context, I applied the following patch to make the
card available:
SVN rev 186389 on 2008-12-22 00:46:22Z by yongari
Since we don't request reset for rlphy(4), the link state 'UP'
event from mii(4) may not be delivered if valid link
...sorry.
-Original Message-
From: FreeBSD [mailto:free...@optiksecurite.com]
Sent: 26 January 2009 18:58
To: freebsd-questions@freebsd.org
Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
FreeBSD a écrit :
Hi everyone,
Just to put you in context, I applied the following patch
a little more information
than that. What is the algorithm used would be a nice start.
Thank you for sharing your OT knowledge!
Martin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
totally confused...
Thanks for your help.
Martin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
1 - 100 of 712 matches
Mail list logo
