Hi,
USB memstick img file is solution for me.
I try FreeBSD-8.3-RELEASE-amd64-memstick.img.
I downloaded this img file and copy to USB, not burn it to USB.
Then attach to İLO such as USB virtual image then sysinstall start, BUT I
selected installation from usb install NOT CD/DVD installation.
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such as virtual drive not from
cd or dvd.
In
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I tried
to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use acd0 and
cd0 as media. I got the same result.
ERROR: I'm trying to add freebsd8.3iso from ILO such
On 5 Jul 2013, at 00:01, bw.mail.lists bw.mail.li...@gmail.com wrote:
On 7/4/2013 4:59 PM, Emre Çamalan wrote:
Hi,
I'm trying to install FreeBSD with an HP ILO 4 advanced, web interface. I
tried to install FreeBSD 8.2, FreeBSD 8.3 and FreeBSD 8.4. I tried to use
acd0 and cd0 as media. I
loader console autoboot
it worked,
thanks
best regards
Date: Thu, 10 Jan 2013 10:15:22 -0800
From: d...@pki2.com
To: cwe...@hotmail.com
Subject: Re: FreeBSD Hp Proliant DL580 g7 IBM 3650 installation problem
CC: freebsd-questions@freebsd.org
On Thu, 10 Jan 2013, Emre ?amalan
Hello,
I have tried to install freebsd 9.0 into my laptop from usb flash memory(4GB).
I can only reach the first installation screen but the installation cannot
start and keeps rebooting. I have read the documents in your website and
downloaded FreeBSD-9.0-RELEASE-amd64-memstick.img and
I apologise in advance if this is a stupid question. I am having
problrems installing ports the ones that fail always do so with same
problem:
Attempting to fetch ftp://ftp.cs.cuhk.edu.hk/pub/Login Failure On
ttyv1
I have looked to see if i can change the ftp site, i cannot ping
On 08/03/2012 11:24, ellip...@elliptic.plus.com wrote:
I apologise in advance if this is a stupid question. I am having
problrems installing ports the ones that fail always do so with same
problem:
Attempting to fetch ftp://ftp.cs.cuhk.edu.hk/pub/Login Failure On
ttyv1
I have
Omer Faruk SEN wrote:
[edited to relocate top post]
[snip]
If you need to clear the old MBR the old way, use a LiveFS or Fixit
shell and do this (as root):
sysctl kern.geom.debugflags=16 and:
dd if=/dev/zero of=/dev/adx oseek=1 bs=512 count=1
where x equals your drive number. This will
On Fri, 24 Feb 2012, Omer Faruk SEN wrote:
Already done that but still habe the same issue. I can dd and sysctl but
after installing without using W at disk label screen still no luck. I have
also done
sysctl kern.geom.debugflags=16 on fixit and restarted installation but
still getting the same
Warren Block wrote:
On Fri, 24 Feb 2012, Omer Faruk SEN wrote:
Already done that but still habe the same issue. I can dd and sysctl but
after installing without using W at disk label screen still no luck. I
have also done
sysctl kern.geom.debugflags=16 on fixit and restarted installation
I have done a simple
dd if=/dev/zero of=/dev/ad6 count=100 bs=1m which i think covers all. But
still no luck.
Regards.
On Fri, Feb 24, 2012 at 8:11 PM, Michael Powell nightre...@hotmail.comwrote:
Warren Block wrote:
On Fri, 24 Feb 2012, Omer Faruk SEN wrote:
Already done that but still
Already done that but still habe the same issue. I can dd and sysctl but
after installing without using W at disk label screen still no luck. I have
also done
sysctl kern.geom.debugflags=16 on fixit and restarted installation but
still getting the same error.
On Thu, Feb 23, 2012 at 1:27 AM,
Hi,
I am trying to install FreeBSD 8.3-BETA1 to a system with ssd disk
recognized as ad6. At fixit mode i can dd device but at installer
(sysinstall) when I configured disk and using w installer is unable to
format devices stating that
Unable to find device node for /dev/ad6s1b in dev. The
On Wed, 22 Feb 2012, Omer Faruk SEN wrote:
I am trying to install FreeBSD 8.3-BETA1 to a system with ssd disk
recognized as ad6. At fixit mode i can dd device but at installer
(sysinstall) when I configured disk and using w installer is unable to
format devices stating that
Unable to find
Warren Block wrote:
On Wed, 22 Feb 2012, Omer Faruk SEN wrote:
I am trying to install FreeBSD 8.3-BETA1 to a system with ssd disk
recognized as ad6. At fixit mode i can dd device but at installer
(sysinstall) when I configured disk and using w installer is unable to
format devices stating
From owner-freebsd-questi...@freebsd.org Sat Dec 24 23:42:28 2011
Date: Sun, 25 Dec 2011 00:38:04 -0500
From: heat...@trans-world.org
To: freebsd-questions@freebsd.org
Subject: Freebsd installation problem with 3ware 8506-4LP - storage
controller (RAID)
Hello, we tried to instal Freebsd
Hello, we tried to instal Freebsd with my 3ware 8506-4LP - storage
controller (RAID)
and it seems freebsd does not support my raid card could you please
tell me how to fox this problem?
Here below ismy data center message I got after they tried to instal
freebsd on my server,
regards, Miss
On Mon, Feb 21, 2011 at 8:37 PM, Jim Trigg jtr...@spamcop.net wrote:
I do an installation from DVD on AMD64, and when I reboot it hangs
before displaying anything from the standard boot loader. How can I
debug this?
I found my problem by accident -- I had a badly formatted USB stick
I do an installation from DVD on AMD64, and when I reboot it hangs
before displaying anything from the standard boot loader. How can I
debug this?
Thanks,
Jim Trigg
___
freebsd-questions@freebsd.org mailing list
Hi,
On Monday 23 August 2010 15:01:22 Mubeesh ali wrote:
Hi,
In my case(stuck at bios splash after freebsd install) ,i had to give it to
acer support ,as i risked losing warranty if i opened/dismantled my laptop.
They have diagnosed harddrive to be faulty(the laptop is hardly 15 days old
On Mon, 23 Aug 2010 00:05:39 -0400, Derek Schwartz derekschwart...@gmail.com
wrote:
Well, I don't have a memory stick, but I do have other hard drives,
should I try it on the other HD's???
Have you been lucky to successfully boot from CD / DVD (1st question)
and install FreeBSD onto the hard
Hi,
In my case(stuck at bios splash after freebsd install) ,i had to give it to
acer support ,as i risked losing warranty if i opened/dismantled my laptop.
They have diagnosed harddrive to be faulty(the laptop is hardly 15 days old
:-( ). The lappy was running ubuntu and fedora fine.
Hope
On Thu, Aug 19, 2010 at 01:01:08AM -0400, Derek Schwartz wrote:
Hey, I'm trying to install the latest release of FreeBSD on my Dell
Desktop, the computer originally had windows XP, but then the hard
drive was wiped clean.
I tried reconfiguring the geometry of the hard drive by using my Linux
//* I've re-included the list, hope that's okay.
On Thu, 19 Aug 2010 12:15:13 -0400, Derek Schwartz derekschwart...@gmail.com
wrote:
I re-formated the drive and it still gives me the same error error {0-01}
You don't need to format anything. Just make sure all kinds
of partitions are removed.
//* I've re-included the list, hope that's okay.
On Thu, 19 Aug 2010 22:02:25 -0400, Derek Schwartz derekschwart...@gmail.com
wrote:
as soon as a I put the cd in the computer for the first time.
Please try to avoid top-posting, as it counts as bad style on
this maining list; thank you.
If the
Hi ,
not sure.This sounds like my issue as well ? After install of bsd on a
laptop with ubuntu ;it does not boot and gets stuck in bios splash . I had
emailed on this earlier.
thanks,
Mubeesh
On Fri, Aug 20, 2010 at 8:42 AM, Polytropon free...@edvax.de wrote:
//* I've re-included the list,
On Thu, 19 Aug 2010 23:58:44 -0400, Derek Schwartz derekschwart...@gmail.com
wrote:
hmmm... I've tried the full install... maybe I'll try the boot only
CD...
Basically, that shouldn't make any difference. I usually use the
full install (1 CD) when building a system from scratch intendedly.
On Fri, 20 Aug 2010 09:35:42 +0530, Mubeesh ali mubeeshal...@gmail.com wrote:
Hi ,
not sure.This sounds like my issue as well ? After install of bsd on a
laptop with ubuntu ;it does not boot and gets stuck in bios splash . I had
emailed on this earlier.
Yes, the verbosity of the error
Hey, I'm trying to install the latest release of FreeBSD on my Dell
Desktop, the computer originally had windows XP, but then the hard
drive was wiped clean.
I tried reconfiguring the geometry of the hard drive by using my Linux
Ubuntu Disk Utility, I changed it to {0-a5} which I heard was for
On Thu, 19 Aug 2010 01:01:08 -0400, Derek Schwartz derekschwart...@gmail.com
wrote:
Hey, I'm trying to install the latest release of FreeBSD on my Dell
Desktop, the computer originally had windows XP, but then the hard
drive was wiped clean.
I tried reconfiguring the geometry of the hard
I guess I have the same problem.
I trying to install 7.2-RELEASE on server with Supermicro
X8DTU-Fhttp://market.yandex.ru/model.xml?modelid=4633058MB. BIOS is
the newest.
Just in time I boot from CD I get such errors after detecting CPU:
acd0: TIMEOUT - READ_BIG retrying (1 retry left)
acd0:
Hellow,my name is Ivan,i have installation problem
configuration:
intel seleron Dual-core e3300 2.5/800/1mb BOX LGA775 BX80571E3300
ASUS P5KPL-AM SE Soket 775/iG31/DDR II/PCI-Ex16/Video/mAXT
DDR II 1024Mb PC-6400,800MHz Crucial (Micron)
160Gb Hitachi HDS721016LA386(0A39261)8MB SATA-II
Codegen
, you may want to try and do the
ftp/network installation using the boot only ISO.
Good luck--
Richard
2010/4/13 Александров Иван jetana...@yandex.ru
Hellow,my name is Ivan,i have installation problem
configuration:
intel seleron Dual-core e3300 2.5/800/1mb BOX LGA775 BX80571E3300
ASUS P5KPL-AM
Александров Иван wrote:
Hellow,my name is Ivan,i have installation problem
configuration:
intel seleron Dual-core e3300 2.5/800/1mb BOX LGA775 BX80571E3300
ASUS P5KPL-AM SE Soket 775/iG31/DDR II/PCI-Ex16/Video/mAXT
DDR II 1024Mb PC-6400,800MHz Crucial (Micron)
160Gb Hitachi HDS721016LA386
Tried to install from both 8.0-BETA{3, 4}-i386-dvd1.iso on a Phenom 9600
system and having
some disk problems.
The system is running 6.x and/or 7.2 FreeBSD (on different drives).
Disconnected rest drives and only left 7.2 drive in.
ad0: 76319MB Seagate ST3802110A 3.AAJ at ata0-master UDMA100
Jin Guojun writes:
Tried to install from both 8.0-BETA{3, 4}-i386-dvd1.iso on a
Phenom 9600 system and having some disk problems.
After commit, installation says --
Unable to find device node for /dev/ad0s1b in /dev
The Creation of file system will abort.
OK
[Press enter or
Qt
===
Due to Qt version mismatch, any application referring to the new qt4-xx
libraries not
installed automagically hence NOT installing the intended package. You have
to
deinstall old qt-x referred libraries manually first. Then everything
should work fine.
Note that Qt has lots of
need to link liboil-0.3.so.3 to liboil-0.3.so.0, so anyone having problem
with this,
can do the follwoing
ln -s liboil-0.3.so.3 liboil-0.3.so.0
--
Aftab Jahan Subedar
CEO/Software Engineer
Subedar Technologies Ltd
Subedar Baag Bibir Bagicha #1
North Jatra Bari
Dhaka 1204
Bangladesh
88027554546
On 2009-Jul-29, 20:35, Anton Shterenlikht wrote:
this is a regression
after some recent port updates, on 7.2-stable, 8.0-current and 8.0-beta2
port lang/g95 gives:
% g95 any fortran file
g95: installation problem, cannot exec 'f951': No such file or directory
Fixed, thanks.
http
On Thu, Jul 30, 2009 at 09:43:28AM +0200, Pietro Cerutti wrote:
On 2009-Jul-29, 20:35, Anton Shterenlikht wrote:
this is a regression
after some recent port updates, on 7.2-stable, 8.0-current and 8.0-beta2
port lang/g95 gives:
% g95 any fortran file
g95: installation problem
:
% g95 any fortran file
g95: installation problem, cannot exec 'f951': No such file or directory
Fixed, thanks.
http://lists.freebsd.org/pipermail/cvs-ports/2009-July/177135.html
thank you, but now there is a linker error:
% g95 somefile
ld: cannot find -lf95
Please set your
, on 7.2-stable, 8.0-current and 8.0-beta2
port lang/g95 gives:
% g95 any fortran file
g95: installation problem, cannot exec 'f951': No such file or directory
Fixed, thanks.
http://lists.freebsd.org/pipermail/cvs-ports/2009-July/177135.html
thank you, but now
this is a regression
after some recent port updates, on 7.2-stable, 8.0-current and 8.0-beta2
port lang/g95 gives:
% g95 any fortran file
g95: installation problem, cannot exec 'f951': No such file or directory
I updated g95 with portmaster, so all dependencies should've been
followed.
What
Hi,
I was having trouble with amarok2 on kde 4 (no sound), and decided to
try to reinstall phonon on the advice of several bulletin boards, but
when I tried, by system told me that phonon conflicted with
kdebase4-runtime. I deinstalled kdebase4-runtime, reinstalled phonon,
and now I want to
Hi there..
I hope this is the correct mailing list to ask this question.
I have a Dell Poweredge R710 server (brand new)... 7.2-RELEASE installs fine
but I'm having a problem getting any large partitions over approximately
500GB. During the installation it allows me to create 4.5TB
On 05/07/2009 07:28 PM, Paul Stewart wrote:
Hi there..
I hope this is the correct mailing list to ask this question.
I have a Dell Poweredge R710 server (brand new)... 7.2-RELEASE installs fine
but I'm having a problem getting any large partitions over approximately
500GB.
On Thursday 26 March 2009 14:10:48 RW wrote:
On Thu, 26 Mar 2009 07:20:38 +0100
Alain G. Fabry alainfa...@belgacom.net wrote:
Hi,
My WINE was running fine, but while performing a portupgrade I got an
error message. So I decided to remove WINE and reinstall. Now I can't
install it
Hi,
My WINE was running fine, but while performing a portupgrade I got an error
message. So I decided to remove WINE and reinstall. Now I can't install it
either. I get the following message
=== wine-1.1.17,1 builds, but fails upon startup.
*** Error code 1
Stop in /usr/ports/emulators/wine.
On Thu, 26 Mar 2009 07:20:38 +0100
Alain G. Fabry alainfa...@belgacom.net wrote:
Hi,
My WINE was running fine, but while performing a portupgrade I got an
error message. So I decided to remove WINE and reinstall. Now I can't
install it either.
If you ever do that again, make a package
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Righard van Roy wrote:
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over FTP. In the installation menu I select that I
do not wish to use IPv6, and that I do wish to use DHCP. I
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over FTP. In the installation menu I select that I
do not wish to use IPv6, and that I do wish to use DHCP. I sure I have
selected the correct Network card. Although after this my DHCP
Date: Sun, 17 Feb 2008 12:02:36 +0200
From: [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Subject: FTP installation problem.
Hello,
I was planning stepping over from Linux to BSD. I trying to install FreeBSD
using the minimal boot cd over
it is detected, but you may need to give options to moused (if you run it)
to know to get usb not ps2 mouse, or in xorg.conf
On Tue, 5 Feb 2008, FreeBSD User wrote:
Hi there,
I got X working -- I went into sysinstall and installed one of the NVIDIA
drivers.
No luck with the mouse. Here is
Hi there,
I got X working -- I went into sysinstall and installed one of the NVIDIA
drivers.
No luck with the mouse. Here is my dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of
Hello,
I have tried installing FreeBSD 7.0-Current for amd64, and I am having
problems with my mouse and video card.
My hardware is as follows:
Gigabyte p35-ds3r motherboard
Intel Core 2 Quad 2.4GHz (Q6600)
NVidia 8400GS
Microsoft Comfort Optical 3000 mouse
Microsoft Natural Ergonomic Keyboard
On Wed, Jan 30, 2008 at 09:53:14AM -0500, FreeBSD User wrote:
Hello,
I have tried installing FreeBSD 7.0-Current for amd64, and I am having
problems with my mouse and video card.
My hardware is as follows:
Gigabyte p35-ds3r motherboard
Intel Core 2 Quad 2.4GHz (Q6600)
NVidia 8400GS
On Wed, Jan 30, 2008 at 09:53:14AM -0500, FreeBSD User wrote:
[...]
Problem 2:
I cannot get X started. I get the following errors:
Failed to load module nv (module does not exist, 0)
Failed to load module mouse (module does not exist, 0)
Failed to load module kbd (module does not exist,
I am having trouble getting X11 to start correctly. I have tried useing the
ModeLine 1152x768 73.50 1152 1312 1352 1464 768 804 808 837 in the Monitor
section for Xorg.conf.new which I found in /var/log/Xorg.0.log which section
5.4.3.2 of the FreeBSD handbook for X11 installation says to do.
I
Joel Hatton wrote:
On Mon, 30 Jul 2007 21:46:44 -0700, Garrett Cooper wrote:
Rakhesh is correct.
SATA / PATA drives show up under ad[m]s[n][l], where m is the disk
number (zero based), n is the slice, aka partition number in the non-BSD
(/Solaris?) world, number (zero based), and l is the
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Mon, 30 Jul 2007, [EMAIL PROTECTED] wrote:
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk
On Tue, Jul 31, 2007 at 08:31:09AM +0400, Rakhesh Sasidharan wrote:
On Mon, 30 Jul 2007, [EMAIL PROTECTED] wrote:
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk which already contains Windows XP. I have created a partition for
FreeBSD. My problem comes once I commit to the installation of
FreeBSD. I get the following message, after
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk which already contains Windows XP. I have created a partition for
FreeBSD. My problem comes once I commit to the
On Mon, 30 Jul 2007, [EMAIL PROTECTED] wrote:
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk which already contains Windows XP. I have created a partition for
Rakhesh Sasidharan wrote:
On Mon, 30 Jul 2007, [EMAIL PROTECTED] wrote:
On 30/07/07, Rakhesh Sasidharan [EMAIL PROTECTED] wrote:
On Sun, 29 Jul 2007, Terrence Wilson wrote:
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk which already contains Windows XP. I have
On Mon, 30 Jul 2007 21:46:44 -0700, Garrett Cooper wrote:
Rakhesh is correct.
SATA / PATA drives show up under ad[m]s[n][l], where m is the disk
number (zero based), n is the slice, aka partition number in the non-BSD
(/Solaris?) world, number (zero based), and l is the respective letter
Joel Hatton wrote:
On Mon, 30 Jul 2007 21:46:44 -0700, Garrett Cooper wrote:
Rakhesh is correct.
SATA / PATA drives show up under ad[m]s[n][l], where m is the disk
number (zero based), n is the slice, aka partition number in the non-BSD
(/Solaris?) world, number (zero based), and
I'm trying to install FreeBSD as part of a dual boot config on a hard
disk which already contains Windows XP. I have created a partition for
FreeBSD. My problem comes once I commit to the installation of
FreeBSD. I get the following message, after which installation aborts:
Unable to find
pj [EMAIL PROTECTED] writes:
When trying to install CUPS and also when installing Gnome-light, I
get the same error messsage, really, the exact same:
=== cups-1.2.10_1 depends on executable: espgs - not found
===Verifying install for espgs in /usr/ports/print/cups-pstoraster
===
Lowell Gilbert wrote:
pj [EMAIL PROTECTED] writes:
When trying to install CUPS and also when installing Gnome-light, I
get the same error messsage, really, the exact same:
=== cups-1.2.10_1 depends on executable: espgs - not found
===Verifying install for espgs in
When trying to install CUPS and also when installing Gnome-light, I get
the same error messsage, really, the exact same:
=== cups-1.2.10_1 depends on executable: espgs - not found
===Verifying install for espgs in /usr/ports/print/cups-pstoraster
=== Installing for
/ Installation problem
On Thursday 15 March 2007, Kris Kennaway wrote:
On Thu, Mar 15, 2007 at 08:43:32PM +0100, Nino Ivanov wrote:
Dear Chistian, Dear Kris,
I also think the RAM will not be the issue, as it is a text-only
install, and indeed, I am not planning to get fancy. I
completely
-
Von: Josh Paetzel [mailto:[EMAIL PROTECTED]
Gesendet: Freitag, 16. März 2007 00:05
An: freebsd-questions@freebsd.org
Cc: Kris Kennaway; Nino Ivanov
Betreff: Re: FreeBSD 2.2.9 / Installation problem
On Thursday 15 March 2007, Kris Kennaway wrote:
On Thu, Mar 15, 2007 at 08:43:32PM +0100, Nino
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nino Ivanov
Sent: 16 mars 2007 07:07
To: 'Josh Paetzel'; freebsd-questions@freebsd.org
Cc: 'Kris Kennaway'
Subject: AW: FreeBSD 2.2.9 / Installation problem
I tried to send to freebsd-questions
On Friday 16 March 2007, Ian Lord wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Nino
Ivanov Sent: 16 mars 2007 07:07
To: 'Josh Paetzel'; freebsd-questions@freebsd.org
Cc: 'Kris Kennaway'
Subject: AW: FreeBSD 2.2.9 / Installation problem
I
/ Installation problem
I tried to send to freebsd-questions the following twice, and twice failed!:
Looks like both were posted. Why would you think it failed?
jerry
Dear Sir or Madam,
I tried reaching
ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/
from my Windows
On Fri, Mar 16, 2007 at 12:07:26PM +0100, Nino Ivanov wrote:
I tried to send to freebsd-questions the following twice, and twice failed!:
Dear Sir or Madam,
I tried reaching
ftp://ftp-archive.freebsd.org/pub/FreeBSD-Archive/old-releases/
from my Windows XP machine, using Firefox
Commander that shall
display my .pdf-files on my HP Omnibook 600c. I have no pretentions as to
which version, so long as it fits the purpose. So, I would be grateful if
you could advise me as to how to correct my installation problem of FreeBSD
2.2.9; however, if another solution looks better to you, please
Ivanov
_
Von: Nino Ivanov [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 15. März 2007 09:59
An: 'freebsd-questions@FreeBSD.org'
Betreff: FreeBSD 2.2.9 / Installation problem
Dear Sir or Madam,
First of all, I would like to thank all involved in this project for the
work
On 15/03/07, Nino Ivanov [EMAIL PROTECTED] wrote:
Dear Sir or Madam,
[...]
The target machine is a HP Omnibook 600c laptop with 8MB RAM, a 486 DX4
processor, 300 MB disk space. No CD drive. No network available. External
floppy drive without DMA. (I tried NetBSD, but because of the lack of
On Thu, Mar 15, 2007 at 12:28:12PM +0100, Christian Walther wrote:
On 15/03/07, Nino Ivanov [EMAIL PROTECTED] wrote:
Dear Sir or Madam,
[...]
The target machine is a HP Omnibook 600c laptop with 8MB RAM, a 486 DX4
processor, 300 MB disk space. No CD drive. No network available. External
PROTECTED]
Gesendet: Donnerstag, 15. März 2007 19:13
An: Christian Walther
Cc: Nino Ivanov; freebsd-questions@freebsd.org
Betreff: Re: FreeBSD 2.2.9 / Installation problem
On Thu, Mar 15, 2007 at 12:28:12PM +0100, Christian Walther wrote:
On 15/03/07, Nino Ivanov [EMAIL PROTECTED] wrote:
Dear Sir
On Thu, Mar 15, 2007 at 08:43:32PM +0100, Nino Ivanov wrote:
Dear Chistian, Dear Kris,
I also think the RAM will not be the issue, as it is a text-only install,
and indeed, I am not planning to get fancy. I completely don't need X.
Midnight Commander is perfectly fine as a working
On Thursday 15 March 2007, Kris Kennaway wrote:
On Thu, Mar 15, 2007 at 08:43:32PM +0100, Nino Ivanov wrote:
Dear Chistian, Dear Kris,
I also think the RAM will not be the issue, as it is a text-only
install, and indeed, I am not planning to get fancy. I
completely don't need X.
After running nmap for some time, I have got problem running a simple command
of nmap ... like
nmap 192.168.1.2
nmap: Command not found
I think there is something wrong with my installation procedures. I type in
make install clean command in /usr/local/bin/nmap and
/usr/ports/security/nmap -
On 1/9/07, linux quest [EMAIL PROTECTED] wrote:
After running nmap for some time, I have got problem running a simple command
of nmap ... like
nmap 192.168.1.2
nmap: Command not found
I think there is something wrong with my installation procedures. I type in make install
clean command in
Hmm you shouldnt have a /usr/local/bin/nmap/ directory.
whats the output of
ls -l /usr/local/bin/nmap
if it is a directory delete the directory, then try
cd /usr/ports/security/nmap
make deinstall clean
make install clean
which nmap
cheers,
Vince
linux quest wrote:
Hi Vince,
Thanks for
Hello
Can someone help me?
I am trying to install PHP 4.4 on my freeBSD box. I have installed apache20
already and its working perfect. But when I want to install PHP, I get
compilation error.
1. first I give this command:
./configure --prefix=/usr/local/apache2/php
On 12/27/06, VeeJay [EMAIL PROTECTED] wrote:
Hello
Can someone help me?
I am trying to install PHP 4.4 on my freeBSD box. I have installed apache20
already and its working perfect. But when I want to install PHP, I get
compilation error.
1. first I give this command:
./configure
77- Original Message
From: Tom McLaughlin [EMAIL PROTECTED]
Just install from the FreeBSD ports tree.
cd /usr/ports/net/py-ldap2 make install clean
Thanks,
Rachel
Yahoo! Music Unlimited
]
Sent: Tuesday, November 07, 2006 8:09 AM
To: Mark Maddox
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.1 Installation problem
Mark Maddox [EMAIL PROTECTED] writes:
I have an onboard Intel ICH7-M SATA controller with an SATA hard drive
and cdrom connected to it. I am unable
-Original Message-
From: Boris Samorodov [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 08, 2006 8:50 AM
To: Mark Maddox
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.1 Installation problem
On Wed, 8 Nov 2006 08:02:14 -0700 Mark Maddox wrote:
The cable
On Wed, 8 Nov 2006 09:00:30 -0700 Mark Maddox wrote:
On Wed, 8 Nov 2006 08:02:14 -0700 Mark Maddox wrote:
The cable is fine; I installed windows on the drive in the machine
that is having problems, just to see if it would work. I'm still
trying
to get FreeBSD 6.1 up
Mark Maddox
-Original Message-
From: Boris Samorodov [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 08, 2006 9:21 AM
To: Mark Maddox
Cc: freebsd-questions@freebsd.org
Subject: Re: FreeBSD 6.1 Installation problem
On Wed, 8 Nov 2006 09:00:30 -0700 Mark Maddox wrote:
On Wed, 8 Nov
On Wed, 8 Nov 2006 09:29:36 -0700 Mark Maddox wrote:
On Wed, 8 Nov 2006 09:00:30 -0700 Mark Maddox wrote:
On Wed, 8 Nov 2006 08:02:14 -0700 Mark Maddox wrote:
The cable is fine; I installed windows on the drive in the
machine
that is having problems, just to see if it would
Mark Maddox [EMAIL PROTECTED] writes:
I have an onboard Intel ICH7-M SATA controller with an SATA hard drive
and cdrom connected to it. I am unable to install FreeBSD onto the
harddrive.
According to the FreeBSD website ICH7 has been supported since version
6.0
I have tried putting
I have an onboard Intel ICH7-M SATA controller with an SATA hard drive
and cdrom connected to it. I am unable to install FreeBSD onto the
harddrive.
According to the FreeBSD website ICH7 has been supported since version
6.0
I have tried putting the controller in Legacy Mode and tried
Hi.
At Sat, 23 Sep 2006 21:49:20 +0200,
Vo?ten?k Vladim?r wrote:
I have an old HP NETSERVER PRO 2xpentium pro, 256 MB ram,
and I tried to install the actual FREEBSD 6.1 there. I made 3
floppies: boot, kernel1 and kernel2. When it starts booting from
the boot floppy, the loader show I only
--- Vo¹tenák Vladimír [EMAIL PROTECTED] wrote:
Hi
I have an old HP NETSERVER PRO 2xpentium pro, 256 MB
ram,
and I tried to install the actual FREEBSD 6.1 there.
I made 3
floppies: boot, kernel1 and kernel2. When it starts
booting from
the boot floppy, the loader show I only have
1 - 100 of 243 matches
Mail list logo
