please test if you can your PSU before you got another one...
On Sat, Feb 12, 2011 at 2:17 PM, yawg yaw...@gmail.com wrote:
Hi,
Thanks for your comments and help.
When I pressed the CUDA for a couple of times, about 10 to 20 seconds,
there was no battery installed.
I did
Carmonne carmo...@aol.com wrote:
On Feb 3, 2011, at 2:06 PM, Kris Tilford wrote:
On Feb 3, 2011, at 3:40 PM, yawg wrote:
But this time I didn't even get the restart screen again but only a
bong and then nothing, both my monitors stayed dark.
The fact that you got a bong or chime
? This is the
first Mac I cannot get to run again after a crash, it's very
frustrating.
Regards, Jörg.
On 3 feb, 23:47, John Carmonne carmo...@aol.com wrote:
On Feb 3, 2011, at 2:06 PM, Kris Tilford wrote:
On Feb 3, 2011, at 3:40 PM, yawg wrote:
But this time I didn't even get the restart
Hi,
As for you, Miguel, I really hope that this has nothing to do with the
PSU. I would rather see a hard drive fail than a PSU fail, because I
really like this PowerMac and I think that this one is the last
powerpc mac that I bought. Therefore, it should last long.
I also have problems with
Hi,
Yesterday I came back home after 3 months abroad and started up my
MDD, it booted fine and I did some work and then played music from the
harddisk. Suddenly the music playback got stuck and the Mac froze. I
switched it off holding down the power button. When I started it again
I got the
If all else fails just start Toast and choose the optical drive to
open or close. Or at system startup keep the mouse button down and all
drives will open IIRC.
Regards, Jörg.
On 5 jan, 23:12, t...@io.com t...@io.com wrote:
On Jan 4, 11:50 pm, Todd - ttoo...@gmail.com wrote:
Same with me and
Hi,
Apparently some phishy things are going on on Facebook now. This is a
screenshot of my son's FB and normally he is my guy in the know,
sitting in front of his PeeCee almost 24/7 ...
http://www.facebook.com/photo.php?fbid=478584562551set=a.44263812551.52532.610327551
Cheers, Jörg.
On 13
Hi there,
All I can say is that I hope they continue down that path. For now I'll
be watching from the sidelines.
Same here. The drivers for my Rev. 7.1 only worked - somehow - under
Panther as did my webcam as did my Adobe classic apps etc. etc.
That's why I stay in Panther except for
Hi,
I have a problem that doesn't go away. I made a startup disk with Disk
Utility, a clone because DU just copied the blocks, but that disk
won't boot my Mac. I get the login screen even though I am admin and
never see that screen normally. The same if I start up in Tiger or
Panther.
When I
.
From: yawg yaw...@gmail.com
To: G-Group g3-5-list@googlegroups.com
Sent: Tue, October 12, 2010 8:36:06 AM
Subject: Re: How to burn VIDEO_TS
Hello,
Just a little quirk I encountered in Toast. I have versions 6 in
Panther and 8 in Tiger. Because Toast 8 would often
ktilfo...@cox.net wrote:
On Oct 13, 2010, at 3:28 AM, yawg wrote:
But in Panther I can still use all my old apps in Classic which is not
possible in Tiger.
I don't understand this, Classic is fully supported in Tiger? Perhaps
you're one cat off and mean in Tiger you can still use all your
ktilfo...@cox.net wrote:
On Oct 13, 2010, at 3:28 AM, yawg wrote:
But in Panther I can still use all my old apps in Classic which is not
possible in Tiger.
I don't understand this, Classic is fully supported in Tiger? Perhaps
you're one cat off and mean in Tiger you can still use all your
Hello,
Just a little quirk I encountered in Toast. I have versions 6 in
Panther and 8 in Tiger. Because Toast 8 would often hiccup in play
mode, I zipped it and returned to the trusty 6 which plays just fine
in Tiger.
When I tried to unzip my version 8 again for burning DVDs my Tiger
told me
Hello,
Just a little quirk I encountered in Toast. I have versions 6 in
Panther and 8 in Tiger. Because Toast 8 would often hiccup in play
mode, I zipped it and returned to the trusty 6 which plays just fine
in Tiger.
When I tried to unzip my version 8 again for burning DVDs my Tiger
told me
Hi,
I have a Samsung NC10 netbook which I will take on my trip to
Thailand. I also have 400GB of Toast AIF music on my MDD which I want
to take with me on a portable USB Icebox HD with Firewire and USB
interface.
With what (freeware-) app can I play my Toast CDs on the netbook with
the original
Hi,
I have problems with my SCSI-controller card, it is an Adaptec 2906.
My SCSI-Probe in OS9 sees my Microtek Scanmaker III but when I try to
use it I get all kinds of errors. Although I used the scanner before
with Microtec ScanWizard now Photoshop versions 4 and 6 tell me I have
an old driver
Hello Kris,
Zap the PRAM and see if it comes back?
Of course ...
Must have been at least 15 years that I did that for the last time.
Thanks!
Regards, Jörg.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a
Hello Kris,
Zap the PRAM and see if it comes back?
Of course ...
Must have been at least 15 years that I did that for the last time.
Thanks!
Regards, Jörg.
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a
Hi all,
I just pulled the original BenQ CD-Writer in my MDD because of a tray
problem and replaced it with the trusty Pioneer DVD-RW DVR-108 from my
beige MT. Now there is no more bong at startup. I liked the bong
because it is the same as that of my good ole Quadra 840av ...
It doesn't matter
Hi,
Any FW enclosure with Oxford chip set and HDD PATA will do the trick with
CCC. The Oxford chip enclosures will boot the Mac's with out fail 99.9% of
the time.
I'm partial to the Seagate 500 GB drives in an OWC enclosure. but that's just
me:-)
I would go for an external case with
Hi John,
I just want to add that not all external Firewire HDs are bootable. I
have two Firewire/USB cases with Initio chipsets and those won't boot.
It doesn't matter if I use the USB or the FW connection.
Regards, Jörg.
Yeah I run into one sometimes that has a problem booting, Have
Hi John,
I just want to add that not all external Firewire HDs are bootable. I
have two Firewire/USB cases with Initio chipsets and those won't boot.
It doesn't matter if I use the USB or the FW connection.
Regards, Jörg.
Yeah I run into one sometimes that has a problem booting, Have
Hi John,
I just want to add that not all external Firewire HDs are bootable. I
have two Firewire/USB cases with Initio chipsets and those won't boot.
It doesn't matter if I use the USB or the FW connection.
Regards, Jörg.
Yeah I run into one sometimes that has a problem booting, Have
Hi,
I just want to add that not all external Firewire HDs are bootable. I
have two Firewire/USB cases with Initio chipsets and those won't boot.
It doesn't matter if I use the USB or the FW connection.
Regards, Jörg.
--
You received this message because you are a member of G-Group, a group for
Hi,
This is a tad OT but somehow my question might fit in.
I just grabbed from OWC's Garage sale a Mercury Elite Pro AL
Firewire 800/400/USB 2.0 dual drive enclosure. It has the Oxford
924 chipset. The specs say it supports drives up to 1TB.
This just means the chip set has no practical
Yes, and still see old hardware too, like my old SCSI-chain with my
trusty Microtek scanner ...
I never got that Adaptec PCI SCSI-card to work under OSX although I
installed the driver following the instructions. But in OS9 it still
works like a charm. I have the latest G4 MDD which Apple brought
Hi Mike,
I mean the PCI USB cards can cause problems like booting with the
keyboard plugged into them and the system may not be able to use sleep
mode.
No, I already had a feeling like you said so my Apple stuff like kb
and mouse are always in the on-board USB-ports.
I recently had big
Hi Mike,
I mean the PCI USB cards can cause problems like booting with the
keyboard plugged into them and the system may not be able to use sleep
mode.
No, I already had a feeling like you said so my Apple stuff like kb
and mouse are always in the on-board USB-ports.
I recently had big
Hi,
Lately I can't print directly from Classic apps any more. Either I get
a system error -5751 (for example XPress Passport 5.0.1 ) or the app
says that printing wasn't possible because of an unknown error
(Acrobat 4.0.5a).
I can't find anything on the Apple site about that particular system
Sorry people,
I don't know how my last post tripled itself.
I answered not from my mail account but from inside Google Groups, the
same way I posted my other comments. I hope this post stays single ;-)
Regards, Jörg.
--~--~-~--~~~---~--~~
You received this
Hi Andreas,
With the adapters/converters, to connect a SATA drive to a IDE/ATA (PATA)
controller, booting from it is not the question. It will work, because the
SATA drive is seen as a regular IDE/ATA drive by the hardware.
With a SATA PCI card, that provides the system with a number of
Hi Andreas,
With the adapters/converters, to connect a SATA drive to a IDE/ATA (PATA)
controller, booting from it is not the question. It will work, because the
SATA drive is seen as a regular IDE/ATA drive by the hardware.
With a SATA PCI card, that provides the system with a number of
Hi Andreas,
With the adapters/converters, to connect a SATA drive to a IDE/ATA (PATA)
controller, booting from it is not the question. It will work, because the
SATA drive is seen as a regular IDE/ATA drive by the hardware.
With a SATA PCI card, that provides the system with a number of
Hi Michael,
I don't think I trust the Acard adapter. I've not read many
encouraging reviews of it.
If I don't get the Firm Tek, I'll get the adapters.
Are the adapters as reliable as a SATA PCI card? I think I'd rather
get the PCI card over the adapters if I can use larger
drives.
Get the
Hi Mike,
I forgot: the adapter is called OEM IDE2SATA Ultra-ATA to Serial-ATA
adapter.
You can see the picture here:
http://www.nowthatsit.nl/?categorie_id=629
It's the cheapest of the four, the lower on the right.
Jörg.
--~--~-~--~~~---~--~~
You received this
Hi Mike,
I forgot: the adapter is called OEM IDE2SATA Ultra-ATA to Serial-ATA
adapter.
You can see the picture here:
http://www.nowthatsit.nl/?categorie_id=629
It's the cheapest of the four, the lower on the right.
Jörg.
--~--~-~--~~~---~--~~
You received this
Hi,
I can boot from my big SATA drives with the adapters perfectly.
Regards, Jörg.
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
Hi,
How long do you guys think PPC Mac users with IDE/ATA hard
drives have as far as being totally obsolete and finding SATA PCI
cards will be nigh impossible.
Jump over the the LEM Swap List quickly, there's a nice SATA PCI card
for only $45!!!
You should just get an adapter, I use
Hi,
How long do you guys think PPC Mac users with IDE/ATA hard
drives have as far as being totally obsolete and finding SATA PCI
cards will be nigh impossible.
Jump over the the LEM Swap List quickly, there's a nice SATA PCI card
for only $45!!!
You should just get an adapter, I use
Hi,
On Oct 14, 9:18 pm, Stewie de Young stewies...@hotmail.com wrote:
Some Adaptec cards ( you don't tell us which one you have ) are supported up
to Panther -10.3 and Tiger - 10.4.
I have a Sawtooth using 10.4 which has a 2906 that is connected to a Umax
scanner and it works fine.
Other
Hi,
I finally managed to boot my MDD into OS9 again and am now able to use
my old SCSI-chain, MO-drive, good ole Plextor CD-writer and my still
excellent Microtek-scanner.
The thing is I'd like to use my scanner also under OSX, I'm running
Panther and Tiger. When I open System Info I get nada
Hi Peter,
Forget Safari and use Camino. Flash and Ad blockers are integrated, it
has a small footprint (26.6 MB) and as fast as it gets with browsers.
It uses the same engine as Safari and the latest version works even
with Panther. I love it.
Regards, Jörg.
Hi Tom,
Jorg, I've tried other browsers besides Safari, most recently Firefox
which I used for 18 months, and there's always something about them
that doesn't measure up, and I always end up going back to Safari
sooner or later. So, I've decided to stick with Safari now and just
try to
Hi,
I was looking for a bootable SATA PCI controller but couldn't fine
one, also most of them are not bootable anyway.
But there is a good solution out there, a simple small SATA to PATA
adapter that cost me just 9 euros. It fits on the SATA hard disk and
presto! It's just like a big fast ATA
Hi,
Disk Utility finished checking my big disk from my Panther partition.
I don't know how long it took - I left my computer on all night - but
it finished all right and found no problems.
Thank you. Regards, Jörg.
On Mar 4, 7:17 am, Aaron aa...@macuser.fastmail.fm wrote:
At 19:57 -0800
Hi,
My disk space got claustrophobic so I installed a new 1 TB disk,
copied all the files from the old small one to the new one and removed
the old one.
Now every time I want to play a playlist in iTunes I have to tell
iTunes where to find every single tune. Duh ...
Is there a possibility to
.
I followed your instructions and iTunes reworked the whole shebang but
I'm still stuck and have to point iTunes to every new track location.
What a PITA ...
Regards, Jörg.
On Mar 3, 1:12 am, glen glenst...@yahoo.com wrote:
- Original Message
From: yawg yaw...@gmail.com
My disk
Hi Ken,
I installed the Pioneer DVR-116D lately, it's a cheap fast drive. Yes
you need Patchburn if you want to burn from the Finder. But if you use
Toast for burning you'll have all the speeds available w/o Patchburn.
There is also a speedburn patch on the net so you will be able to
access
Hi Peter,
The Initio-based adapters work well in G4 Macs. Less well in Intel Macs.
Both the LaCie and OWC adapters are (were) Initio-based.
The OWC adapter has switchable internal/external, and the external
connector is indeed eSATA, just as the internal connector is indeed
iSATA.
Today
.
On Jan 30, 2:42 pm, yawg yaw...@gmail.com wrote:
Hi,
I have loads of ripped DVDs and a big music archive and the four disks
in my MDD are almost full. Today I saw that a 1TB SATA disk costs the
same amount as a 500GB ATA disk so I decided to buy a big SATA disk
and an ICIDU PCI adapter
.
On Jan 30, 2:42 pm, yawg yaw...@gmail.com wrote:
Hi,
I have loads of ripped DVDs and a big music archive and the four disks
in my MDD are almost full. Today I saw that a 1TB SATA disk costs the
same amount as a 500GB ATA disk so I decided to buy a big SATA disk
and an ICIDU PCI adapter
Hi Eric,
The M-Audio drivers are buggy as hell. And the M-Audio support for
Macs is non-existent. The Rev. 7.1 card sounds very good anyway IMO.
You just have to fiddle about with the different M-Audio driver
versions. Open up the Apple System Prefs and the M-Audio Revolution
7.1app at the same
Hi Eric,
The M-Audio drivers are buggy as hell. And the M-Audio support for
Macs is non-existent. The Rev. 7.1 card sounds very good anyway IMO.
You just have to fiddle about with the different M-Audio driver
versions. Open up the Apple System Prefs and the M-Audio Revolution
7.1app at the same
version of OSX you are using. Fiddle about, fiddle
about ... (remember The Who?)
Sorry for the double posts, but who the f ... gives a s ... anyway?
Cheers, Yawg.
On Feb 5, 10:20 pm, yawg yaw...@gmail.com wrote:
Hi Eric,
The M-Audio drivers are buggy as hell. And the M-Audio support for
Macs is non
version of OSX you are using. Fiddle about, fiddle
about ... (remember The Who?)
Sorry for the double posts, but who the f ... gives a s ... anyway?
Cheers, Yawg.
On Feb 5, 10:20 pm, yawg yaw...@gmail.com wrote:
Hi Eric,
The M-Audio drivers are buggy as hell. And the M-Audio support for
Macs is non
version of OSX you are using. Fiddle about, fiddle
about ... (remember The Who?)
Sorry for the double posts, but who the f ... gives a s ... anyway?
Cheers, Yawg.
On Feb 5, 10:20 pm, yawg yaw...@gmail.com wrote:
Hi Eric,
The M-Audio drivers are buggy as hell. And the M-Audio support for
Macs is non
Hi,
After my BenQ DVD-writer wouldn't write to 16-speed DVD-Rs anymore I
bought a Pioneer DVR-116D as it is seen by Macs as a native drive.
I tried flashing its firmware today on the PC of a friend, the FW on
the drive was 1.04 and the latest Pioneer FW was 1.09. But the
flashing wouldn't work,
Hi,
I have loads of ripped DVDs and a big music archive and the four disks
in my MDD are almost full. Today I saw that a 1TB SATA disk costs the
same amount as a 500GB ATA disk so I decided to buy a big SATA disk
and an ICIDU PCI adapter eSATA which has two internal ports and two
external eSATA
Hi,
I have three external Firewire drives, one with an Oxford-controller
that always boots fine, there is a Tiger clone on that disk now.
My other two have Initio-controllers and used to boot my Panther
clones OK but lost that ability somehow lately, I don't know why. I
always use CCC for
Hi,
I have three external Firewire drives, one with an Oxford-controller
that always boots fine, there is a Tiger clone on that disk now.
My other two have Initio-controllers and used to boot my Panther
clones OK but lost that ability somehow lately, I don't know why. I
always use CCC for
Hi Clark,
Much of the files and folders used in booting and running the OS need to
have Root as the owner. Simply changing permissions to a user account
isn't going to work. You really need to recreate the clone with
permissions not ignored.
I didn't change a thing. I always cloned system
Hi guys,
It seems apple may be saying an APM formatted disk will work on a
Intell based Mac. Article HT2595 refers.
http://support.apple.com/kb/HT2595
but it only works on some models.
So now I am wondering if I make a Universal drive and clone it to an
APM formatted XHD will it be
Hi all,
Sorry for the double post. I forgot about my e-mail setup and replied
directly from the Google group.
Should have replied from my G-mail account ...
Jörg.
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List,
three boot volumes isn't a luxury sometimes ...
Regards, Jörg.
On Nov 7, 4:54 pm, Dan [EMAIL PROTECTED] wrote:
At 3:38 AM -0800 11/7/2008, yawg wrote:
Please remember to BOTTOM post and TRIM on these LEM lists.
It makes tracking support issues MUCH easier.
I know about aliases, have been
three boot volumes isn't a luxury sometimes ...
Regards, Jörg.
On Nov 7, 4:54 pm, Dan [EMAIL PROTECTED] wrote:
At 3:38 AM -0800 11/7/2008, yawg wrote:
Please remember to BOTTOM post and TRIM on these LEM lists.
It makes tracking support issues MUCH easier.
I know about aliases, have been
Hi Richard,
Those photos look exactly like my Porsche brick only yours would be
bigger as it is for an optical drive ...
You will have to try to insert two small blades in the cracks of the
case (two at once on one side at the height of the feet) and then push
the bottom down a bit on that side
actually mean? That the file is
busy when being cloned?
Can I just look up the BootX file on an installer CD and replace the
flaky one with that?
Regards, Jörg.
On Nov 6, 9:02 pm, Dan [EMAIL PROTECTED] wrote:
At 10:02 AM -0800 11/6/2008, yawg wrote:
Every time I try to clone my Panther
actually mean? That the file is
busy when being cloned?
Can I just look up the BootX file on an installer CD and replace the
flaky one with that?
Regards, Jörg.
On Nov 6, 9:02 pm, Dan [EMAIL PROTECTED] wrote:
At 10:02 AM -0800 11/6/2008, yawg wrote:
Every time I try to clone my Panther
Hi,
I opened a Porsche LaCie external (looks like a small brick with no
features at all) with a kitchen knife once and it was a lot of
fiddling around. It was a cheap sale item with a 500 GB disk in it. I
needed the disk as an internal. When I put a smaller disk back in I
broke something on the
Hi,
Every time I try to clone my Panther Partition to a partition on
another disk I get the same error and CCC is telling me:
System/Library/CoreServices/BootX:Input/Output error
Can I just ignore the error or can it cause problems when I'm using
the error-clone?
What gives?
I have a Tiger
70 matches
Mail list logo
