[gentoo-user] xsane - emial "connection failed"
I'm trying to use/setup xsane to email simple document (pdf file) I've set all the parameters in xsane - preference - setup: email correct but I still get an error: SMTP connection failed I'm using port 25 on mail.shaw.ca so there is no authentication and the mail should be accepted. sending mail from command line using "mailto" works; so xsane shouldn't have a problem sending mail. I can not find any logs for xsane program. -- Thelma
[gentoo-user] oracle-jdk-bin-1.8.0 - Fetch Restriction
I'm trying to emerge: oracle-jdk-bin-1.8.0.66 I've downloaded to package jdk-8u66-linux-x64.tar.gz move it to: /usr/portage/distfiles change owner to portage:portage but I still get this error: Calculating dependencies... done! [ebuild NSF ] dev-java/oracle-jdk-bin-1.8.0.66:1.8::gentoo [1.7.0.80:1.7::gentoo] USE="alsa awt cups fontconfig -derby -doc -examples -javafx -jce -nsplugin -pax_kernel (-selinux) -source" 60,303 KiB Total: 1 package (1 in new slot), Size of downloads: 60,303 KiB Fetch Restriction: 1 package (1 unsatisfied) -- Thelma
Re: [gentoo-user] oracle-jdk-bin-1.8.0 - Fetch Restriction
On 11/09/2015 11:16 AM, Frederico Moraes Ferreira wrote: > chmod 0644 > > Em 09-11-2015 20:13, the...@sys-concept.com escreveu: >> I'm trying to emerge: oracle-jdk-bin-1.8.0.66 >> >> I've downloaded to package jdk-8u66-linux-x64.tar.gz >> move it to: /usr/portage/distfiles >> change owner to portage:portage >> >> but I still get this error: >> >> Calculating dependencies... done! >> [ebuild NSF ] dev-java/oracle-jdk-bin-1.8.0.66:1.8::gentoo >> [1.7.0.80:1.7::gentoo] USE="alsa awt cups fontconfig -derby -doc >> -examples -javafx -jce -nsplugin -pax_kernel (-selinux) -source" >> 60,303 KiB >> >> Total: 1 package (1 in new slot), Size of downloads: 60,303 KiB >> Fetch Restriction: 1 package (1 unsatisfied) >> It is: 0644 ll /usr/portage/distfiles/jdk-8u66-linux-x64.tar.gz -rw-r--r-- 1 portage portage 119537664 Nov 9 13:36 /usr/portage/distfiles/jdk-8u66-linux-x64.tar.gz
Re: [gentoo-user][SOLVED] oracle-jdk-bin-1.8.0 - Fetch Restriction
On 11/09/2015 01:43 PM, Alan McKinnon wrote: [snip] >> >> It is: 0644 >> ll /usr/portage/distfiles/jdk-8u66-linux-x64.tar.gz >> -rw-r--r-- 1 portage portage 119537664 Nov 9 13:36 >> /usr/portage/distfiles/jdk-8u66-linux-x64.tar.gz >> > > > Your download was truncated or interrupted. It's too small: > > # ls -al /var/distfiles/jdk-8u66-linux-x64.tar.gz > -rw-r--r-- 1 alan portage 181287376 Oct 23 14:13 > /var/distfiles/jdk-8u66-linux-x64.tar.gz > > > Download the tar.gz again Thanks, yes that was it. Thelma
[gentoo-user] firefox profile uses 100% CPU
When I start one of my firefox profile (even in "-save-mode") it uses 100% CPU and is not responding. Any way to fix it? -- Thelma
Re: [gentoo-user] firefox profile uses 100% CPU
On 11/12/2015 01:40 PM, Mick wrote: > On Thursday 12 Nov 2015 14:46:39 the...@sys-concept.com wrote: >> On 11/12/2015 12:35 AM, netfab wrote: >>> Le 11/11/15 à 17:38, the...@sys-concept.com a tapoté : When I start one of my firefox profile (even in "-safe-mode") it uses 100% CPU and is not responding. >>> >>> If it works in safe-mode, but not without it, then you could try to >>> remove all extensions and clear the cache. >> >> I did, it did not help. > > It could be that the profile is corrupted for some reason. I do agree, but I'm looking for a way to fix it. What file should I delete from Firefox profile. I just want to retain bookmarks, passwords etc.
Re: [gentoo-user] firefox profile uses 100% CPU
On 11/11/2015 11:20 PM, Mick wrote: > On Thursday 12 Nov 2015 00:38:45 the...@sys-concept.com wrote: >> When I start one of my firefox profile (even in "-save-mode") it uses >> 100% CPU and is not responding. >> >> Any way to fix it? > > Is your graphics card and hardware acceleration installed and configured > correctly? I'm using other Firefox profile on the same machine and every works without a problem; only one profile is affected. So I don't see how hardware would have anything to do with it. Thelma
Re: [gentoo-user] firefox profile uses 100% CPU
Thelma On 11/12/2015 05:30 PM, Walter Dnes wrote: > On Thu, Nov 12, 2015 at 01:56:28PM -0700, the...@sys-concept.com wrote > >> I do agree, but I'm looking for a way to fix it. What file should I >> delete from Firefox profile. I just want to retain bookmarks, passwords >> etc. > > Do *NOT* delete any files just see. I would suggest the following > course of action... > > * Do not start any of the profiles unless the instructions say to > * Create 2 new profiles; call them "salvage1" and salvage2" > ***IMPORTANT*** If copying any specific file to "salvage1" screws up > that profile, do ***NOT*** copy it to "salvage2". > * Copy the "places.sqlite" file from the bad profile over top of the > "places.sqlite" file in the "salvage1" profile > * Start up the "salvage1" profile. Try surfing for a few minutes. If > it works, close "salvage1" and copy "places.sqlite" to the same place > in the "salvage2" profile, and skip "Restoring bookmarks from backups". > > "Restoring bookmarks from backups" (ONLY IF places.sqlite IS DAMAGED) > = > * Copy all the files from the "bookmarksbackup" folder in the bad > profile to the "bookmarksbackup" folder in the "salvage1" profile. > * Start up the "salvage1" profile. Select... > Bookmarks ==> Manage Bookmarks > From the Bookmarks Manager select... > Tools ==> Restore > ...and select a backup. Obviously, the more recent the better. If > this works, close the browser ("salvage1") and repeat with the > "salvage2" profile. > = > > There are several more items... > https://support.mozilla.org/en-US/kb/profiles-where-firefox-stores-user-data > > Passwords are stored in the key3.db and logins.json files. > > Site-specific preferences are stored in the permissions.sqlite and > content-prefs.sqlite files. > > Search engines are stored in the search.sqlite file and searchplugins > folder. > > Personal dictionary is stored in persdict.dat > > etc, etc. I know that it's painfull, but... > > 1) Make sure "salvage1" and "salvage2" are both shut down. > 2) Copy over *ONE* file listed on the above webpage at a time to the > "salvage1" profile, and launch "salvage1" and try it out. > 3) If it works, shut down "salvage1", and copy the same file over to >the "salvage2" profile. If "salvage1" dies, you've found a culprit. >Copy the file of the same name from the "salvage2" profile to the >"salvage1" profile. > 4) GOTO 1 (i.e. "rinse, lather, repeat") and repeat for every file >listed on the webpage I pointed to. There may be more than 1 >corrupted file > > After you're finished, you can go to > > Tools ==> Switch Profile ==> Manage Profiles > > There, you can rename or delete the old profile, and rename "salvage1" > to the name of your old profile. Note that this will only affect the > name that it is invoked with by the "-P" option. It will not change the > directory name. Thank you for detailed instructions, that was a good idea but I'm puzzled and surprised by the result. I created two new profiles: salvage1 (new) salvage2 (new) test (this profile is damaged) Originally started profile salvage1, salvage2 to create all the necessary files. I've copied all the files from: .mozilla/firefox/tscsip8f.test/ (not sub-folders) to: salvage1 profile, indeed something is dammage CPU goes 100% Deleted "salvage1" and recreated it. Now, I copied files "one by one" from test profile to salvage1 and started "salvage1" every time to make sure it work. At the same time I copied the same file from "test" to "salvage2" (without starting "salvage2"); I was only starting "salvege1" after each file I copied. I finished copping all the file from test "one-by-one" starting the profile "salvage1" and it worked but when I started profile "salvage2" the CPU when 100%. So it seems to me every time I was restarting profile "salvage1" Firefox was correcting the error some how. Though, I can not import the bookmarks, I'm on Firefox-bin-38.3.0 There is no entry: Bookmarks ==> Manage Bookmarks I have: Bookmarks ==> Show All Bookmarks where I can restore and backup bookmars. I've tried to restore bookmarks from file: bookmarks-2015-11-12.json but I'm getting an error message: "Unable to process the backup file." -- Thelma
Re: [gentoo-user] firefox profile uses 100% CPU
On 11/12/2015 12:35 AM, netfab wrote: > Le 11/11/15 à 17:38, the...@sys-concept.com a tapoté : >> When I start one of my firefox profile (even in "-safe-mode") it uses >> 100% CPU and is not responding. > > > If it works in safe-mode, but not without it, then you could try to > remove all extensions and clear the cache. I did, it did not help.
Re: [gentoo-user] firefox profile uses 100% CPU
Thelma On 11/12/2015 08:22 PM, waben...@gmail.com wrote: > the...@sys-concept.com wrote: > > [...] >> Though, I can not import the bookmarks, I'm on Firefox-bin-38.3.0 >> There is no entry: Bookmarks ==> Manage Bookmarks >> I have: Bookmarks ==> Show All Bookmarks >> where I can restore and backup bookmars. I've tried to restore >> bookmarks from file: bookmarks-2015-11-12.json >> but I'm getting an error message: "Unable to process the backup file." > > Try to save the bookmarks as HTML file (E > > Bookmarks -> Show All Bookmarks > Import and Backup -> Export Bookmarks to HTML... > I tried that, it didn't work either. Thelma
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect
Thelma On 11/13/2015 11:08 PM, the...@sys-concept.com wrote: > I'm running: nxserver-freenx-0.7.3_p104-r7 > After recent upgrade, system installed new stable openssh-7.1_p1-r2 > > The problem is the new openssh-7.1_p1-r2 will not allow my my "nxserver" to > connect, I get an error: > Permission denied (publickey,keyboard-interactive) see below: > > nxsetup --test > ... > < done > > > Testing your nxserver connection ... > Permission denied (publickey,keyboard-interactive). > Fatal error: Could not connect to NX Server. > > Please check your ssh setup: > > The following are _examples_ of what you might need to check. > > - Make sure "nx" is one of the AllowUsers in sshd_config. > (or that the line is outcommented/not there) > - Make sure "nx" is one of the AllowGroups in sshd_config. > (or that the line is outcommented/not there) > - Make sure your sshd allows public key authentication. > - Make sure your sshd is really running on port 22. > - Make sure your sshd_config AuthorizedKeysFile in sshd_config is set > to authorized_keys2. > (this should be a filename not a pathname+filename) > - Make sure you allow ssh on localhost, this could come from some > restriction of: > -the tcp wrapper. Then add in /etc/hosts.allow: ALL:localhost > -the iptables. add to it: > $ iptables -A INPUT -i lo -j ACCEPT > $ iptables -A OUTPUT -o lo -j ACCEPT > > What I should be getting is this: > > Testing your nxserver connection ... > HELLO NXSERVER - Version 3.2.0-74-TEAMBZR104 OS (GPL, using backend: 3.5.0) > NX> 105 quit > Quit > NX> 999 Bye > <--- done > > I did not change anything in sshd_config. > But I downgraded to: openssh-6.9_p1-r2 and nxserver connects OK. > > What could be the problem with new: openssh-7.1_p1-r2 I think the reason is that OpenSSH 7.0 disables ssh-dss keys by default https://www.gentoo.org/support/news-items/2015-08-13-openssh-weak-keys.html And and nxserver is using ssh-dss keys by default. I have to find a way a way to replace the ssh-dss key in: /etc/nxserver/ with RSA one. Do I just run: ssh-keygen -t rsa and copy the key pair to /etc/nxserver/ directory? -- Thelma
[gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect
I'm running: nxserver-freenx-0.7.3_p104-r7 After recent upgrade, system installed new stable openssh-7.1_p1-r2 The problem is the new openssh-7.1_p1-r2 will not allow my my "nxserver" to connect, I get an error: Permission denied (publickey,keyboard-interactive) see below: nxsetup --test ... < done > Testing your nxserver connection ... Permission denied (publickey,keyboard-interactive). Fatal error: Could not connect to NX Server. Please check your ssh setup: The following are _examples_ of what you might need to check. - Make sure "nx" is one of the AllowUsers in sshd_config. (or that the line is outcommented/not there) - Make sure "nx" is one of the AllowGroups in sshd_config. (or that the line is outcommented/not there) - Make sure your sshd allows public key authentication. - Make sure your sshd is really running on port 22. - Make sure your sshd_config AuthorizedKeysFile in sshd_config is set to authorized_keys2. (this should be a filename not a pathname+filename) - Make sure you allow ssh on localhost, this could come from some restriction of: -the tcp wrapper. Then add in /etc/hosts.allow: ALL:localhost -the iptables. add to it: $ iptables -A INPUT -i lo -j ACCEPT $ iptables -A OUTPUT -o lo -j ACCEPT What I should be getting is this: > Testing your nxserver connection ... HELLO NXSERVER - Version 3.2.0-74-TEAMBZR104 OS (GPL, using backend: 3.5.0) NX> 105 quit Quit NX> 999 Bye <--- done I did not change anything in sshd_config. But I downgraded to: openssh-6.9_p1-r2 and nxserver connects OK. What could be the problem with new: openssh-7.1_p1-r2 -- Thelma
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect
On 11/14/2015 04:11 AM, Mick wrote: [snip] > > Since openssh-7.0 DSS keys are disabled and about time too! > > == > if has_version "<${CATEGORY}/${PN}-7.1_p1" ; then #557388 > elog "Starting with openssh-7.0, support for ssh-dss keys were > disabled due to their" > elog "weak sizes. If you rely on these key types, you can re-enable > the key types by" > elog "adding to your sshd_config:" > elog " PubkeyAcceptedKeyTypes=+ssh-dss" > elog "You should however generate new keys using rsa or ed25519." > fi > == > > > Also SHA1 hashes are disabled and you will get errors like these when you try > to login to a server which is still using deprecated ciphers: > > Unable to negotiate with XXX.XX.XXX.X: no matching host key type found. Their > offer: ssh-dss > > Unable to negotiate with XXX.XX.XXX.X: no matching key exchange method found. > Their offer: diffie-hellman-group1-sha1 > > If this is within your LAN and therefore relatively protected, you could > specify deprecated ciphers and hashes like so: > > ssh -o KexAlgorithms=+diffie-hellman-group1-sha1 -o > HostKeyAlgorithms=+ssh-dss > my_u...@xxx.xx.xxx.X > > > Alternatively, after you create a strong prime: > > ssh-keygen -t rsa -b 4096 > > > or probably better to use ed25519: > > ssh-keygen -t ed25519 > > HTH. The only software that uses ssh-dss key and I need is nxserver. I just added a line to my: sshd_config PubkeyAcceptedKeyTypes=+ssh-dss restarted "sshd and nxserver" but I nxserver still doesn't work, running: nxsetup --test (I get): > Testing your nxserver connection ... Permission denied (publickey,password,keyboard-interactive). Fatal error: Could not connect to NX Server. -- Thelma
Re: [gentoo-user] Firefox-bin GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
On 11/11/2015 12:58 PM, Neil Bothwick wrote: > On Wed, 11 Nov 2015 11:38:27 -0700, the...@sys-concept.com wrote: > >> Is "www-client/chromium" good alternative to firefox? > > I much prefer it, but that's all it is, personal preference. Try it and > decide for yourself. It's a long emerge so you may want to try with > chrome first, it's a binary package so much faster to install. I was just checking out on other forums; chromium is an open source and not very well maintain. www-client/google-chrome suppose to be better. -- Thelma
[gentoo-user] Firefox-bin GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
After upgrading to firefox-bin-38.3.0 when I try to start one of the profiles I get an error message: (process:17154): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed (process:17154): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed console.error: [CustomizableUI] Custom widget with id loop-button does not return a valid node console.error: [CustomizableUI] Custom widget with id loop-button does not return a valid node Terminated The CPU goes 100% and I have to kill the process. I was trying to downgrade to the version that worked OK for me: Firefox-bin-38.1.1 but it is no longer in portage. When I try to pull it down from attic and make a manifest it failed as well: ebuild /usr/local/portage/www-client/firefox-bin/firefox-bin-38.1.1.ebuild manifest >>> Downloading >>> 'ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases//38.1.1esr/linux-i686/xpi/gl.xpi' --2015-11-11 11:24:12-- ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases//38.1.1esr/linux-i686/xpi/gl.xpi => ‘/usr/portage/distfiles/firefox-38.1.1esr-gl.xpi’ Resolving ftp.mozilla.org... 54.230.143.163 It seems to me it can not find: firefox-38.1.1esr-gl.xpi Is "www-client/chromium" good alternative to firefox? -- Thelma
[gentoo-user] bring back emerge to terminal window
I was running and emerge -uDNavq world and accidentally closed the terminal window. I know the process ID as it is still running. ps fax |grep emerge -- 19131 pts/1 SN+ 4:03 | | \_ /usr/bin/python3.4 -b /usr/lib/python-exec/python3.4/emerge -uDNavq world Is there a way to ring it back to a terminal window? -- Thelma
Re: [gentoo-user] New Gentoo box
[snip] > If you don't need it I'd save your money and spend it on a better CPU, MoBo, > and/or RAM. Does Gentoo support Intel Core Processor Integrated Graphics Controller in Intel i5 I was thinking of going with Intel instead of AMD. Regarding better motherboard my preference is one that use 100% Jpanese capacitors, if I'm not mistaken Gigabit is one of them. -- Thelma
Re: [gentoo-user] New Gentoo box
On 11/05/2015 11:06 PM, J. Roeleveld wrote: [snip] >> You might be right, maybe I'll add one HDD for backup (good suggestion). >> The killer is my 1TB SSD $499.99CAD > > Get 1 SSD for the OS, software and your home directory. (240GB is usually > enough) > And 1 big HDD for your data. > > Keep your documents and other data out of the home directory if doing this. > Reason I suggest your home directory on SSD is because programs tend to store > a lot in your home directory which can benefit from a faster disk. It seems to me that SSD drives are slower than standard spinning disks. I was just comparing my two disk with hdparm 1.) Western Digital model: Model=WDC WD2002FAEX-007BA0 hdparm -Tt /dev/sda /dev/sda: Timing cached reads: 9406 MB in 2.00 seconds = 4705.88 MB/sec Timing buffered disk reads: 432 MB in 3.00 seconds = 143.92 MB/sec 2.) Intel SSD model Model=INTEL SSDSC2BF480A5 /dev/sda: Timing cached reads: 1292 MB in 2.00 seconds = 645.51 MB/sec Timing buffered disk reads: 536 MB in 3.00 seconds = 178.63 MB/sec It seems to me the spinning disk WD is faster than my Intel SSD So is there an advantage of overpaying for SSD? -- Thelma
Re: [gentoo-user] New Gentoo box
On 11/07/2015 02:52 PM, Bill Kenworthy wrote: > On 08/11/15 05:22, the...@sys-concept.com wrote: >> On 11/05/2015 11:06 PM, J. Roeleveld wrote: >> [snip] >> >>>> You might be right, maybe I'll add one HDD for backup (good suggestion). >>>> The killer is my 1TB SSD $499.99CAD >>> >>> Get 1 SSD for the OS, software and your home directory. (240GB is usually >>> enough) >>> And 1 big HDD for your data. >>> >>> Keep your documents and other data out of the home directory if doing this. >>> Reason I suggest your home directory on SSD is because programs tend to >>> store >>> a lot in your home directory which can benefit from a faster disk. >> >> It seems to me that SSD drives are slower than standard spinning disks. >> I was just comparing my two disk with hdparm >> >> 1.) Western Digital model: Model=WDC WD2002FAEX-007BA0 >> hdparm -Tt /dev/sda >> >> /dev/sda: >> Timing cached reads: 9406 MB in 2.00 seconds = 4705.88 MB/sec >> Timing buffered disk reads: 432 MB in 3.00 seconds = 143.92 MB/sec >> >> 2.) Intel SSD model Model=INTEL SSDSC2BF480A5 >> /dev/sda: >> Timing cached reads: 1292 MB in 2.00 seconds = 645.51 MB/sec >> Timing buffered disk reads: 536 MB in 3.00 seconds = 178.63 MB/sec >> >> It seems to me the spinning disk WD is faster than my Intel SSD >> So is there an advantage of overpaying for SSD? >> >> -- >> Thelma >> > > olympus ~ # hdparm -tT /dev/sda > > /dev/sda: > Timing cached reads: 20442 MB in 1.99 seconds = 10278.90 MB/sec > Timing buffered disk reads: 1164 MB in 3.00 seconds = 387.66 MB/sec > olympus ~ # hdparm -tT /dev/sdb > > /dev/sdb: > Timing cached reads: 20320 MB in 1.99 seconds = 10218.13 MB/sec > Timing buffered disk reads: 300 MB in 3.00 seconds = 99.88 MB/sec > olympus ~ # > > > Something is not right with your system ... > > sda is an older intel ssd, sdb is a western digital red which somethimes > gets close to that your speed. > > try multiple measurements, no load on the system. I did run test several times, still get the same numbers. Maybe the reason is that one system is much smaller slower. The SSD is running on smaller box: Atom-TM-_CPU_330_@_1.60GHz The WD is bitter unit: AMD_FX-tm-8150_Eight-Core_Processor -- Thelma
Re: [gentoo-user] New Gentoo box
On 11/07/2015 02:13 AM, Neil Bothwick wrote: > On Fri, 6 Nov 2015 16:45:18 -0700, the...@sys-concept.com wrote: > >> Does Gentoo support Intel Core Processor Integrated Graphics Controller >> in Intel i5 > > Yes. There might be some problems, see: Early Intel Skylake Linux Users May Run Into A Silly Issue http://www.phoronix.com/scan.php?page=news_item=intel-skl-prelim-support I was trying to select this Intel CPU: Intel Core™ i5-6600K Processor but "...you won't get kernel mode-setting support and working 3D acceleration for Skylake's HD Graphics... You'll get a low resolution display and fall-back to the LLVMpipe Gallium3D driver. Yes, even with modern kernels." -- Thelma
[gentoo-user] New Gentoo box
I'm putting a new box, it will run Gentoo (hylafax, Asterisk) and Windows 7 in VirtualBox (mainly). Box will run 24/7. Below are the components. Will I have a problem with any of them or is there a better choice? (the box need to be small as I don't have much room). - INWIN BL631 Low Power Micro ATX Case w/300W power supply - Gigabit GA-78LMT-USB3 w/DDR3, 7.1 Audio, Gigabit Lan - Samsung 850 EVO Series Solid State Drive 1-TB - LG GH240 SuperMulti 24x DVD Writer, SATA (not sure if I even need it)? - Kingston HyperX FURY Black 16GB DDR3-1600MHz CL 10 Dual Channel (4x 8GB) Total 32GB RAM - AMD FX-6300 Processor 3.5GHz w/ 14MB Cache - Asus GeForce GT610 CMS 2GB PCI-E w/ DVI HDMI -- Thelma
Re: [gentoo-user] New Gentoo box
On 11/05/2015 11:06 PM, J. Roeleveld wrote: > Please do not top-post. Thank you for reminder :-/ > > On Thursday, November 05, 2015 07:17:38 PM the...@sys-concept.com wrote: >> When it comes to price I think the 1TB SDD is expensive in my case + >> $177.99CAD warranty (though I don't know if I need warranty, or why they >> are charging me for it)? > > It might be extended warranty. IOW, more then the usual factory warranty. > I would ask them about that. I think it might be Extended Warranty (I'll take it out), it is not worth it. > >> = >> GRANT TOTAL: $1420.98 >> >> PS. Expensive like for a small box. > > I can't comment on prices, been a while since I looked into a new desktop. > If that were Euros, I'd find it a lot for what you get. No, that was in Canadian Dollars $1420.98 in Euros it would be 952.53 and in USD 1054.92 >> Maybe I don't need 32GB or RAM but even 16GB RAM would save me only $112.99 > > My laptop has 16GB Ram and it works quite nicely. Doesn't use swap often. > Also allows me to run VMs comfortably. > >> You might be right, maybe I'll add one HDD for backup (good suggestion). >> The killer is my 1TB SSD $499.99CAD > > Get 1 SSD for the OS, software and your home directory. (240GB is usually > enough) > And 1 big HDD for your data. I think I'll get rid of Extended Warranty and take a this 1TB SSD > > Keep your documents and other data out of the home directory if doing this. I'm not sure I understand. Why keeping document our of the home dir.? > Reason I suggest your home directory on SSD is because programs tend to store > a lot in your home directory which can benefit from a faster disk. -- Thelma
[gentoo-user] xsane does not save letter size pdf
When I scan and save 'multipageproject" it does not save as letter size, I get: Page size: 611 x 708 pts and it should be: Page size: 612 x 792 pts (letter) In Xsane setting: Window - Show Advance Options I have: Bottom Right x-in 8.50 Bottom Rigth y-in 11.00 Anybody knows how to force xsane to save pdf document in 612 x 792 pts (letter) -- Thelma
Re: [gentoo-user] New Gentoo box
When it comes to price I think the 1TB SDD is expensive in my case + $177.99CAD warranty (though I don't know if I need warranty, or why they are charging me for it)? Here is my pricing in CAD - INWIN BL631 Low Power Micro ATX Case w/300W power supply $84.99 - Gigabit GA-78LMT-USB3 w/DDR3, 7.1 Audio, Gigabit Lan $79.99 - Samsung 850 EVO Series Solid State Drive 1-TB $499.99 - LG GH240 SuperMulti 24x DVD Writer, SATA $24.99 - Kingston HyperX FURY Black 16GB DDR3-1600MHz CL 10 Dual Channel 4 x 8 GB Total 32 GB RAM $225.98 - AMD FX-6300 Processor 3.5GHz w/ 14MB Cache$144.99 - Asus GeForce GT610 CMS 2GB PCI-E w/ DVI HDMI $69.99 - assembly $40.00 - Warranty ??? $177.99 = TOTAL $1348.91 ADS for CPU v2 (WHAT IS THAT?) $4.40 GST $67.67 = GRANT TOTAL:$1420.98 PS. Expensive like for a small box. Maybe I don't need 32GB or RAM but even 16GB RAM would save me only $112.99 You might be right, maybe I'll add one HDD for backup (good suggestion). The killer is my 1TB SSD $499.99CAD -- Thelma On 11/05/2015 06:56 PM, Philip Webb wrote: > 151105 the...@sys-concept.com wrote: >> I'm putting a new box, it will run Gentoo (hylafax, Asterisk) >> and Windows 7 in VirtualBox (mainly). Box will run 24/7. >> Will I have a problem with any of these components ? >> Is there a better choice ? >> The box need to be small as I don't have much room. >> >> - INWIN BL631 Low Power Micro ATX Case w/300W power supply >> - Gigabit GA-78LMT-USB3 w/DDR3, 7.1 Audio, Gigabit Lan >> - Samsung 850 EVO Series Solid State Drive 1-TB >> - LG GH240 SuperMulti 24x DVD Writer, SATA >> - Kingston HyperX FURY Black 16GB DDR3-1600MHz CL 10 Dual Channel >> 4 x 8 GB Total 32 GB RAM >> - AMD FX-6300 Processor 3.5GHz w/ 14MB Cache >> - Asus GeForce GT610 CMS 2GB PCI-E w/ DVI HDMI >> Do I need the DVD ? > > The machine I built in Sep has (prices in CAD) : > > 150914 CPU : AMD X8 FX8370E 8-core 4,3 GHz 16 MB 32 nm 95 W : 259.00 > Direct replacement : 3 yr : 38.85 > 150926 Mobo : ASUS M5A97 LE AMD 970/SB8950 DDR3 1866 GHz : 104.99 > 150914 Memory : Kingston HyperX Fury 8 GB DDR3 1866 MHz CL10 : 68.99 > 150914 Graphix : Asus GT610 810 MHz clock 1200 MHz memory: 74.99 > 150914 SSD : Kingston SSDNow V300 240 GB SATA RW 450 MB/s: 109.99 > 150914 HDD : Seagate Desktop SATA3 1 TB 64 MB 6 GB/s : 57.99 > Ont recycle fee :0.75 > 150914 DVD : Samsung SH-224FB 24x SATA 1.5 MB: 21.99 > Ont recycle fee :0.75 > 150917 Case : Deepcool Terraract BF : 39.99 > 150917 PSU : Thermaltake TR2 500 W : 59.99 > > subtotal : 838.27 >tax : 108.98 > total : 947.25 > > Warranty : manufacturer : > Memory life ; PSU 5 yr ; CPU Mobo Graphix SSD 3 yr ; HDD 1 yr . > > Mobo : back USB2 dead, froze w front USB3, destroyed FS on USB stick, > case fan didn't start : returned for refund : > > 150914 Mobo : Gigabyte GA-970A-UD3P 970+SB950 DDR3 2000 : 119.99 > 2x PCI-Express x16 GLAN 6xSATA 6.0 Gb/s 4xUSB 3.0 14xUSB 2.0 > > I had to return the Gigabyte mobo due to serious defects. > Otherwise, everything as worked perfectly. > I couldn't get it to hibernate, but that seems fairly common. > Do you need 32 GB RAM ? -- I find 8 GB is more than enough, > except when emerging LO + FF using tmpfs (they have to use a drive instead) ; > you sb able to get 1866 GHz memory : mine is overclocked at 2133 GHz . > I like to have optical back-ups in case Earth's poles reverse (grin), > so the DVD drive will get used a couple of times a year. > > Your list omits an SSD drive : they're much faster than HDD, > tho' you should have one of those too for back-ups etc. >
Re: [gentoo-user] New Gentoo box
On 11/06/2015 02:04 AM, Mick wrote: > On Thursday 05 Nov 2015 23:45:11 the...@sys-concept.com wrote: >> I'm putting a new box, it will run Gentoo (hylafax, Asterisk) and >> Windows 7 in VirtualBox (mainly). Box will run 24/7. >> >> Below are the components. Will I have a problem with any of them or is >> there a better choice? >> (the box need to be small as I don't have much room). >> >> - INWIN BL631 Low Power Micro ATX Case w/300W power supply > > What is the PSU? For a 24-7 server/workstation this becomes a critical > component and other than your SSD a cause of early failure. Buy something > with good quality capacitors (Japanese), or be prepared to get your soldering > out in the not too distant future. YES, yes that is my concern as well. Many of my boxes are running 24/7 and I have replaced PSU many time. For example I have: Intel Atom CPU 330 @1.60GHz (run 24/7 Hylafax + Asterisk) It a tiny box, has one of those external 12V power adapters, I have replaced that adapter 2-times and my the PS fried as well at the same time, so I think PS was responsible for it. I have now SSD 250GB in it. So yes, I would like to find good power supply with JAPANESE capacitors if possible. That Chinese piece of CRAP doesn't last long. Any recommendation for PSU with JAPANESE capacitors? My problem is I'm buying a small case again: INWIN BL631 Low Power Micro ATX Case 13" x 3.8" x 14.4" so I don't know if I'll have very many choices when it comes to PSU >> - Gigabit GA-78LMT-USB3 w/DDR3, 7.1 Audio, Gigabit Lan >> - Samsung 850 EVO Series Solid State Drive 1-TB > > Will you be eating up as much as 1-TB of data on a day to day basis? I would > suggest you buy two SSDs and set up a RAID1, to guard against SSD failure, > plus a spinning drive for filesystems that are re-written frequently (e.g. > application caches), critical data and back ups. I don't have that much experience with RAID so if something goes wrong by the time I trouble shoot it what when wrong and how to fix it, it might take some time (a day+ or so); I can not afford it. My solution is to run two boxes if one goes down to switch to another box takes me only 15min. > > >> - LG GH240 SuperMulti 24x DVD Writer, SATA (not sure if I even need it)? > > If you don't need it I'd save your money and spend it on a better CPU, MoBo, > and/or RAM. > > >> - Kingston HyperX FURY Black 16GB DDR3-1600MHz CL 10 Dual Channel (4x >> 8GB) Total 32GB RAM > > Unless you will be running large databases and websites in RAM I can't see > you > ever using up all of this. I'd save the money and buy faster memory > (2133MHz, > or 2400MHz), or if speed (O/C) is not important buy ECC memory instead. Good suggestion. > >> - AMD FX-6300 Processor 3.5GHz w/ 14MB Cache > > A reliable workhorse and easy to O/C, but rather dated and overtaken both in > performance and economy by Intel's products. If economy features in your > requirements and you don't do heavy gaming you may want to consider AMD's > APUs > like Kaveri. In a few years you will probably save in electricity the small > difference in price. Are Intel's CPU better now-a-days? What is the difference: AMD FX-6300 Vishera is 6-Core CPU AMD A10-7850K Kaveri Quad-Core 3.7 GHz according to: http://cpuboss.com/cpus/AMD-FX-6300-vs-AMD-A10-7850K AMD FX-6300 is the winner (I'm not an expert on it). > > You will need a better cooler for either, if you are going to O/C them. No, I have no need for over-clocking > > >> - Asus GeForce GT610 CMS 2GB PCI-E w/ DVI HDMI Most of the new video cards have only DVI or HDMI connections. On my current setup I have two boxes using an old 9-pin (??) video connection/cable connected via KVM switch, so quick hitting "2x Scroll Lock" allows me for quick switching between them. If I replace the box with DVI/HDMI connection I'll be looking for a new KVM hybrid switch (if one exist) or a different solution. I only want one mouse/monitor/keyboard to access them. -- Thelma
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect
conf #LpkServers ldap://10.1.7.1/ ldap://10.1.7.2/ #LpkUserDN ou=users,dc=phear,dc=org #LpkGroupDN ou=groups,dc=phear,dc=org #LpkBindDN cn=Manager,dc=phear,dc=org #LpkBindPw secret #LpkServerGroup mail #LpkFilter (hostAccess=master.phear.org) #LpkForceTLS no #LpkSearchTimelimit 3 #LpkBindTimelimit 3 #LpkPubKeyAttr sshPublicKey # override default of no subsystems Subsystem sftp/usr/lib64/misc/sftp-server # the following are HPN related configuration options # tcp receive buffer polling. disable in non autotuning kernels #TcpRcvBufPoll yes # disable hpn performance boosts #HPNDisabled no # buffer size for hpn to non-hpn connections #HPNBufferSize 2048 # allow the use of the none cipher #NoneEnabled no # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # PermitTTY no # ForceCommand cvs server # Allow client to pass locale environment variables #367017 AcceptEnv LANG LC_* -- Thelma
Re:[gentoo-user][SOLVED] emerge --oneshot portage - conflict
All it was needed was in portage.use # required by app-portage/gentoolkit-0.3.0.9-r2 # required by app-portage/gentoolkit (argument) =sys-apps/portage-2.2.20.1 python_targets_python3_3 Thelma On 08/30/2015 08:43 AM, Mick wrote: On Saturday 29 Aug 2015 20:36:04 neu pat wrote: I emerge python3.4 set as active: eselect python list Available Python interpreters: [1] python2.7 [2] python3.3 [3] python3.4 * but it still complain about Multiple package instances [ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14] PYTHON_TARGETS=python3_4* -python3_3* !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: sys-apps/portage:0 (sys-apps/portage-2.2.20.1:0/0::gentoo, ebuild scheduled for merge) pulled in by sys-apps/portage (Argument) (sys-apps/portage-2.2.14:0/0::gentoo, installed) pulled in by sys-apps/portage[python_targets_python2_7(-)?,python_targets_python3_3(-)?, -python_single_target_python2_7(-),-python_single_target_python3_3(-)] required by (app-admin/webapp-config-1.52-r1:0/0::gentoo, installed) sys-apps/portage[python_targets_python2_7(-)?,python_targets_python3_3(-)?, python_targets_python3_4(-)?,python_targets_pypy(-)?,-python_single_target_ python2_7(-),-python_single_target_python3_3(-),-python_single_target_pytho n3_4(-),-python_single_target_pypy(-)] required by (app-portage/gentoolkit-0.3.0.9-r2:0/0::gentoo, installed) How to fix it? #joseph Try the --newuse flag, after you remove any 'python_targets_python3_3' entries you have inadvertently left in your /etc/portage/package.use
Re: [gentoo-user][SOLVED] emerge --oneshot portage - conflict
I always do emerge -uDNavq world I think it should be OK Thelma On 08/30/2015 05:58 PM, Fernando Rodriguez wrote: On Sunday, August 30, 2015 9:41:04 AM the...@sys-concept.com wrote: All it was needed was in portage.use # required by app-portage/gentoolkit-0.3.0.9-r2 # required by app-portage/gentoolkit (argument) =sys-apps/portage-2.2.20.1 python_targets_python3_3 Thelma Now you'll probably run into similar errors when you do run an update with the --newuse (ideally you should use it for every update -- it's the same as the N flag on my original reply) or when one of those packages is updated. On 08/30/2015 08:43 AM, Mick wrote: On Saturday 29 Aug 2015 20:36:04 neu pat wrote: I emerge python3.4 set as active: eselect python list Available Python interpreters: [1] python2.7 [2] python3.3 [3] python3.4 * but it still complain about Multiple package instances [ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14] PYTHON_TARGETS=python3_4* -python3_3* !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: sys-apps/portage:0 (sys-apps/portage-2.2.20.1:0/0::gentoo, ebuild scheduled for merge) pulled in by sys-apps/portage (Argument) (sys-apps/portage-2.2.14:0/0::gentoo, installed) pulled in by sys- apps/portage[python_targets_python2_7(-)?,python_targets_python3_3(-)?, -python_single_target_python2_7(-),-python_single_target_python3_3(-)] required by (app-admin/webapp-config-1.52-r1:0/0::gentoo, installed) sys- apps/portage[python_targets_python2_7(-)?,python_targets_python3_3(-)?, python_targets_python3_4(-)?,python_targets_pypy(-)?,- python_single_target_ python2_7(-),-python_single_target_python3_3(-),- python_single_target_pytho n3_4(-),-python_single_target_pypy(-)] required by (app-portage/gentoolkit-0.3.0.9-r2:0/0::gentoo, installed) How to fix it? #joseph Try the --newuse flag, after you remove any 'python_targets_python3_3' entries you have inadvertently left in your /etc/portage/package.use
Re: [gentoo-user] emerge --oneshot portage - conflict
Here is my emerge-info python target is 2.7.9-r1, 3.3.5-r1, 3.4.1 emerge --info Portage 2.2.14 (python 2.7.9-final-0, default/linux/x86/13.0/desktop, gcc-4.8.4, glibc-2.19-r1, 3.10.17-gentoo i686) = System uname: Linux-3.10.17-gentoo-i686-AMD_Athlon-TM-_XP_2500+-with-gentoo-2.2 KiB Mem: 1034164 total, 25920 free KiB Swap:2008120 total, 2003204 free Timestamp of tree: Fri, 28 Aug 2015 22:30:02 + ld GNU ld (Gentoo 2.24 p1.4) 2.24 ccache version 3.1.9 [disabled] app-shells/bash: 4.2_p53 dev-java/java-config: 2.2.0 dev-lang/perl:5.20.2 dev-lang/python: 2.7.9-r1, 3.3.5-r1, 3.4.1 dev-util/ccache: 3.1.9-r4 dev-util/cmake: 2.8.12.2-r1 dev-util/pkgconfig: 0.28-r2 sys-apps/baselayout: 2.2 sys-apps/openrc: 0.13.11 sys-apps/sandbox: 2.6-r1 sys-devel/autoconf: 2.13, 2.69 sys-devel/automake: 1.10.3-r1, 1.11.6-r1, 1.13.4 sys-devel/binutils: 2.24-r3 sys-devel/gcc:4.1.2, 4.5.4, 4.7.3-r1, 4.8.4 sys-devel/gcc-config: 1.7.3 sys-devel/libtool:2.4.6 sys-devel/make: 4.1-r1 sys-kernel/linux-headers: 3.18 (virtual/os-headers) sys-libs/glibc: 2.19-r1 Repositories: gentoo x-portage ACCEPT_KEYWORDS=x86 ACCEPT_LICENSE=* -@EULA PUEL dlj-1.1 Oracle-BCLA-JavaSE CBUILD=i686-pc-linux-gnu CFLAGS=-O2 -march=athlon-xp -pipe -fomit-frame-pointer CHOST=i686-pc-linux-gnu CONFIG_PROTECT=/etc /usr/lib/fax /usr/share/gnupg/qualified.txt /var/spool/fax/etc CONFIG_PROTECT_MASK=/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.3/ext-active/ /etc/php/apache2-php5.5/ext-active/ /etc/php/cgi-php5.3/ext-active/ /etc/php/cgi-php5.5/ext-active/ /etc/php/cli-php5.3/ext-active/ /etc/php/cli-php5.5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c CXXFLAGS=-O2 -march=athlon-xp -pipe -fomit-frame-pointer DISTDIR=/usr/portage/distfiles EMERGE_DEFAULT_OPTS=--autounmask-write=y --keep-going --with-bdeps=y FCFLAGS=-O2 -march=i686 -pipe FEATURES=assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync FFLAGS=-O2 -march=i686 -pipe GENTOO_MIRRORS=http://distro.ibidio.org/pub/linux/distributions/gentoo/ ftp:///ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ http://gentoo.osuosl.org/ http://mirror.datapipe.net/gentoo http://gentoo.binarycompass.org; LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 LDFLAGS=-Wl,-O1 -Wl,--as-needed MAKEOPTS=-j1 PKGDIR=/usr/portage/packages PORTAGE_CONFIGROOT=/ PORTAGE_RSYNC_OPTS=--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages PORTAGE_TMPDIR=/var/tmp PORTDIR=/usr/portage PORTDIR_OVERLAY=/usr/local/portage USE=X a52 aac acpi alsa apache2 berkdb bluetooth branding bzip2 cairo cdda cdr cgi cleartype cli consolekit corefonts cracklib crypt cups cxx dbus dri dts dvd dvdr emboss encode exif fam firefox flac foomaticdb fortran gdbm gif glamor gpm gtk hal iconv ipv6 java jpeg kpathsea lcms ldap libnotify mad mng modules mp3 mp4 mpeg mysql ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds qt3support readline scanner sdl seccomp semantic-desktop server session spell ssl startup-notification svg tcpd tetex thunar tiff truetype type1 udev udisks unicode upower usb vorbis wxwidgets x264 x86 xcb xml xv xvid zlib ABI_X86=32 ALSA_CARDS=via82xx APACHE2_MODULES=actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info log_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias cgi CALLIGRA_FEATURES=kexi words flow plan sheets stage tables krita karbon braindump author CAMERAS=ptp2 COLLECTD_PLUGINS=df interface irq load memory rrdtool swap syslog CPU_FLAGS_X86=3dnow 3dnowext mmx mmxext sse ELIBC=glibc GPSD_PROTOCOLS=ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx INPUT_DEVICES=evdev KERNEL=linux LCD_DEVICES=bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text LIBREOFFICE_EXTENSIONS=presenter-console presenter-minimizer LINGUAS=en en_US OFFICE_IMPLEMENTATION=libreoffice
[gentoo-user] Failed to set XATTR_PAX markings
While compiling/updating the system I get a few packages with messages: LOG: install Failed to set XATTR_PAX markings -me /var/tmp/portage/app-emulation/virtualbox-bin-4.3.28.100309/image//opt/VirtualBox/VBoxManage. Failed to set XATTR_PAX markings -me /var/tmp/portage/app-emulation/virtualbox-bin-4.3.28.100309/image//opt/VirtualBox/VBoxSVC. Failed to set XATTR_PAX markings -me /var/tmp/portage/app-emulation/virtualbox-bin-4.3.28.100309/image//opt/VirtualBox/VBoxXPCOMIPCD. Failed to set XATTR_PAX markings -me /var/tmp/portage/app-emulation/virtualbox-bin-4.3.28.100309/image//opt/VirtualBox/VBoxTunctl. Failed to set XATTR_PAX markings -me python. etc. What does it mean? -- Thelma
Re: *****SPAM***** Re: [gentoo-user] Failed to set XATTR_PAX markings
le --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" USE="X a52 aac acpi alsa apache2 berkdb bluetooth branding bzip2 cairo cdda cdr cgi cleartype cli consolekit corefonts cracklib crypt cups cxx dbus dri dts dvd dvdr emboss encode exif fam firefox flac foomaticdb fortran gdbm gif glamor gpm gtk hal iconv ipv6 java jpeg kpathsea lcms ldap libnotify mad mng modules mp3 mp4 mpeg mysql ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds qt3support readline scanner sdl seccomp semantic-desktop server session spell ssl startup-notification svg tcpd tetex thunar tiff truetype type1 udev udisks unicode upower usb vorbis wxwidgets x264 x86 xcb xml xv xvid zlib" ABI_X86="32" ALSA_CARDS="via82xx" APACHE2_MODULES="actions alias auth_basic auth_digest authn_anon authn_dbd authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock dbd deflate dir disk_cache env expires ext_filter file_cache filter headers ident imagemap include info l! og_config logio mem_cache mime mime_magic negotiation proxy proxy_ajp proxy_balancer proxy_connect proxy_http rewrite setenvif so speling status unique_id userdir usertrack vhost_alias cgi" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="3dnow 3dnowext mmx mmxext sse" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" LINGUAS="en en_US" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-4 php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby19 ruby2! 0" USERLAN D="GNU" VIDEO_CARDS="nv vesa fbdev" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON Thelma
[gentoo-user] media-libs/jpeg / media-libs/libjpeg-turbo - blocking each other
I have two packages that are blocking each other and none of them are installed: [blocks B ] >=media-libs/libjpeg-turbo-1.3.0-r2:0 (">=media-libs/libjpeg-turbo-1.3.0-r2:0" is blocking media-libs/jpeg-6b-r12) [blocks B ] media-libs/jpeg:62 ("media-libs/jpeg:62" is blocking media-libs/libjpeg-turbo-1.3.1) !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: sys-libs/ncurses:0 (sys-libs/ncurses-5.9-r5:0/5::gentoo, ebuild scheduled for merge) pulled in by sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] required by (sys-libs/ncurses-5.9-r99:5/5::gentoo, ebuild scheduled for merge) (sys-libs/ncurses-5.9-r3:0/0::gentoo, installed) pulled in by sys-libs/ncurses:0/0=[unicode] required by (media-video/vlc-2.1.5-r1:0/5-7::gentoo, installed) ^ (and 1 more with the same problem) * Error: The above package list contains packages which cannot be * installed at the same time on the same system. (media-libs/jpeg-6b-r12:62/62::gentoo, ebuild scheduled for merge) pulled in by =media-libs/jpeg-6* required by (net-misc/nxclient-3.5.0.7:0/0::gentoo, installed) (media-libs/libjpeg-turbo-1.3.1:0/0::gentoo, ebuild scheduled for merge) pulled in by >=media-libs/libjpeg-turbo-1.3.0-r3:0[static-libs?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (>=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-),abi_x86_64(-)]) required by (virtual/jpeg-0-r2:0/0::gentoo, installed) >=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (>=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-),abi_x86_64(-)]) required by (virtual/jpeg-62:62/62::gentoo, ebuild scheduled for merge) I re-emerge "media-video/vlc" but it didn't help. -- Thelma
Re: [gentoo-user] [SOLVED] media-libs/jpeg / media-libs/libjpeg-turbo - blocking each other
On 08/31/2015 04:12 PM, Alan McKinnon wrote: > On 31/08/2015 23:51, the...@sys-concept.com wrote: >> I have two packages that are blocking each other and none of them are >> installed: >> >> >> [blocks B ] >=media-libs/libjpeg-turbo-1.3.0-r2:0 >> (">=media-libs/libjpeg-turbo-1.3.0-r2:0" is blocking media-libs/jpeg-6b-r12) >> [blocks B ] media-libs/jpeg:62 ("media-libs/jpeg:62" is blocking >> media-libs/libjpeg-turbo-1.3.1) >> >> !!! Multiple package instances within a single package slot have been pulled >> !!! into the dependency graph, resulting in a slot conflict: >> >> sys-libs/ncurses:0 >> >> (sys-libs/ncurses-5.9-r5:0/5::gentoo, ebuild scheduled for merge) pulled >> in by >> >> sys-libs/ncurses:0/5[ada?,cxx?,gpm?,static-libs?,tinfo?,unicode?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] >> required by (sys-libs/ncurses-5.9-r99:5/5::gentoo, ebuild scheduled for >> merge) >> >> >> >> >> >> >> (sys-libs/ncurses-5.9-r3:0/0::gentoo, installed) pulled in by >> sys-libs/ncurses:0/0=[unicode] required by >> (media-video/vlc-2.1.5-r1:0/5-7::gentoo, installed) >> ^ >> >> (and 1 more with the same problem) >> >> >> >> * Error: The above package list contains packages which cannot be >> * installed at the same time on the same system. >> >> (media-libs/jpeg-6b-r12:62/62::gentoo, ebuild scheduled for merge) pulled >> in by >> =media-libs/jpeg-6* required by (net-misc/nxclient-3.5.0.7:0/0::gentoo, >> installed) >> >> (media-libs/libjpeg-turbo-1.3.1:0/0::gentoo, ebuild scheduled for merge) >> pulled in by >> >> >=media-libs/libjpeg-turbo-1.3.0-r3:0[static-libs?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] >> (>=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-),abi_x86_64(-)]) >> required by (virtual/jpeg-0-r2:0/0::gentoo, installed) >> >> >=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] >> (>=media-libs/libjpeg-turbo-1.3.0-r3:0[abi_x86_32(-),abi_x86_64(-)]) >> required by (virtual/jpeg-62:62/62::gentoo, ebuild scheduled for merge) >> >> I re-emerge "media-video/vlc" but it didn't help. > > > vlc has nothing to do with your jpeg problem. It's referenced above in a > separate section about ncurses. > > nxclient seems to be at the heart of your problem, it wants a version of > jpeg that conflicts withe libjpeg-turbo. But nxclient is no longer in > the tree. > > When did you last sync the tree? If it was a while back, you should do > it now and retry emerge Found a solution. emerge -avC libjpeg-turbo emerge -av1 media-libs/jpeg:0 media-libs/jpeg:62 Solved the problem.
Re: [gentoo-user] texlive-core - poppler / xpdf missing library
y '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build' Makefile:126: recipe for target 'all' failed make: *** [all] Error 2 * ERROR: app-text/poppler-0.32.0::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=app-text/poppler-0.32.0::gentoo'`, * the complete build log and the output of `emerge -pqv '=app-text/poppler-0.32.0::gentoo'`. * The complete build log is located at '/var/log/portage/app-text:poppler-0.32.0:20150901-183239.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/app-text/poppler-0.32.0/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/app-text/poppler-0.32.0/temp/environment'. * Working directory: '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build' * S: '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0' >>> Failed to emerge app-text/poppler-0.32.0, Log file: >>> '/var/log/portage/app-text:poppler-0.32.0:20150901-183239.log' Thelma
Re: *****SPAM***** Re: [gentoo-user] texlive-core - poppler / xpdf missing library
On 09/01/2015 10:48 AM, the...@sys-concept.com wrote: > > On 09/01/2015 09:47 AM, Alec Ten Harmsel wrote: >> On Tue, Sep 01, 2015 at 07:47:56AM -0600, the...@sys-concept.com wrote: >>> I'm emerging texlive-core and it complains on missing libraries: >>> >>> >>> >>> emerge -1q luatex texlive-core >>> [ebuild N] dev-tex/luatex-0.70.1-r2 >>> [ebuild U ] app-text/texlive-core-2014-r4 [2012-r1] >>> [blocks B ] >> (">> app-text/texlive-core-2014-r4) >>> [blocks B ] dev-tex/luatex ("dev-tex/luatex" is blocking >>> app-text/texlive-core-2014-r4) >> >> texlive-core needs to be updated, not installed with --oneshot. Can you >> try running `emerge --update --newuse --deep --with-bdeps=y @world'? >> >> Alec >> >> > > I run unmerged all "texlive" application and run: > `emerge --update --newuse --deep --with-bdeps=y @world' > > and coming up with the same error message: > > checking requested system `poppler' library... failed > checking requested system `xpdf' library... failed > checking requested system `zziplib' library... ok > configure: error: some requested system libraries failed > It is looking for poppler and xpdf both of these packages are obsolete. Should I look for file dependent of xpdf and poppler and recompile them? -- Thelma
[gentoo-user] poppler-0.32.0 - can not emerge
I can seem to emerge poppler, getting error: Linking CXX executable pdftocairo cd /var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build/utils && /usr/bin/cmake -E cmake_link_script CMakeFiles/pdftocairo.dir/link.txt --verbose=1 /usr/bin/x86_64-pc-linux-gnu-g++ -Wall -Wcast-align -fno-exceptions -fno-check-new -fno-common -march=nocona -O2 -pipe -Wnon-virtual-dtor -Woverloaded-virtual -Wl,-O1 -Wl,--as-needed CMakeFiles/pdftocairo.dir/parseargs.cc.o CMakeFiles/pdftocairo.dir/pdftocairo.cc.o CMakeFiles/pdftocairo.dir/pdftocairo-win32.cc.o CMakeFiles/pdftocairo.dir/__/poppler/CairoFontEngine.cc.o CMakeFiles/pdftocairo.dir/__/poppler/CairoOutputDev.cc.o CMakeFiles/pdftocairo.dir/__/poppler/CairoRescaleBox.cc.o -o pdftocairo -rdynamic -lcairo -lfreetype ../libpoppler.so.51.0.0 -lpthread -llcms2 -Wl,-rpath,/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build: /usr/lib64/libtiff.so.5: undefined reference to `jpeg_finish_compress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_write_scanlines@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_std_error@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_set_quality@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_finish_decompress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_destroy@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_set_defaults@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_read_scanlines@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_CreateCompress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_read_raw_data@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_start_compress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_CreateDecompress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_start_decompress@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_write_tables@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_resync_to_restart@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_set_colorspace@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_read_header@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_write_raw_data@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_abort@LIBJPEG_6.2' /usr/lib64/libtiff.so.5: undefined reference to `jpeg_suppress_tables@LIBJPEG_6.2' collect2: error: ld returned 1 exit status utils/CMakeFiles/pdftocairo.dir/build.make:214: recipe for target 'utils/pdftocairo' failed make[2]: *** [utils/pdftocairo] Error 1 make[2]: Leaving directory '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build' CMakeFiles/Makefile2:305: recipe for target 'utils/CMakeFiles/pdftocairo.dir/all' failed make[1]: *** [utils/CMakeFiles/pdftocairo.dir/all] Error 2 make[1]: Leaving directory '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build' Makefile:126: recipe for target 'all' failed make: *** [all] Error 2 * ERROR: app-text/poppler-0.32.0::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=app-text/poppler-0.32.0::gentoo'`, * the complete build log and the output of `emerge -pqv '=app-text/poppler-0.32.0::gentoo'`. * The complete build log is located at '/var/log/portage/app-text:poppler-0.32.0:20150901-171555.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/app-text/poppler-0.32.0/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/app-text/poppler-0.32.0/temp/environment'. * Working directory: '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build' * S: '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0' There is a but filed about poppler: https://bugs.gentoo.org/show_bug.cgi?id=529182 Apparently the solution is to use: MAKEOPTS="-j1" How do you use it? MAKEOPTS="-j1" emerge -1aNDv app-text/poppler It failed as well. Re-emerging it doesn't help. -- Thelma
Re: [gentoo-user] poppler-0.32.0 - can not emerge
On 09/01/2015 02:05 PM, Fernando Rodriguez wrote: > On Tuesday, September 01, 2015 12:57:31 PM the...@sys-concept.com wrote: >> I can seem to emerge poppler, getting error: >> >> Linking CXX executable pdftocairo >> cd /var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build/utils > && /usr/bin/cmake -E cmake_link_script CMakeFiles/pdftocairo.dir/link.txt -- > verbose=1 >> /usr/bin/x86_64-pc-linux-gnu-g++ -Wall -Wcast-align -fno-exceptions -fno- > check-new -fno-common -march=nocona -O2 -pipe -Wnon-virtual-dtor - > Woverloaded-virtual -Wl,-O1 -Wl,--as-needed > CMakeFiles/pdftocairo.dir/parseargs.cc.o > CMakeFiles/pdftocairo.dir/pdftocairo.cc.o > CMakeFiles/pdftocairo.dir/pdftocairo-win32.cc.o > CMakeFiles/pdftocairo.dir/__/poppler/CairoFontEngine.cc.o > CMakeFiles/pdftocairo.dir/__/poppler/CairoOutputDev.cc.o > CMakeFiles/pdftocairo.dir/__/poppler/CairoRescaleBox.cc.o -o pdftocairo - > rdynamic -lcairo -lfreetype ../libpoppler.so.51.0.0 -lpthread -llcms2 -Wl,- > rpath,/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0_build: >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_finish_compress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_write_scanlines@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to `jpeg_std_error@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to >> `jpeg_set_quality@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_finish_decompress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to `jpeg_destroy@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_set_defaults@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_read_scanlines@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_CreateCompress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_read_raw_data@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_start_compress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_CreateDecompress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_start_decompress@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_write_tables@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_resync_to_restart@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_set_colorspace@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to >> `jpeg_read_header@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_write_raw_data@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to `jpeg_abort@LIBJPEG_6.2' >> /usr/lib64/libtiff.so.5: undefined reference to > `jpeg_suppress_tables@LIBJPEG_6.2' >> collect2: error: ld returned 1 exit status >> utils/CMakeFiles/pdftocairo.dir/build.make:214: recipe for target > 'utils/pdftocairo' failed >> make[2]: *** [utils/pdftocairo] Error 1 >> make[2]: Leaving directory '/var/tmp/portage/app- > text/poppler-0.32.0/work/poppler-0.32.0_build' >> CMakeFiles/Makefile2:305: recipe for target > 'utils/CMakeFiles/pdftocairo.dir/all' failed >> make[1]: *** [utils/CMakeFiles/pdftocairo.dir/all] Error 2 >> make[1]: Leaving directory '/var/tmp/portage/app- > text/poppler-0.32.0/work/poppler-0.32.0_build' >> Makefile:126: recipe for target 'all' failed >> make: *** [all] Error 2 >> * ERROR: app-text/poppler-0.32.0::gentoo failed (compile phase): >> * emake failed >> * >> * If you need support, post the output of `emerge --info '=app- > text/poppler-0.32.0::gentoo'`, >> * the complete build log and the output of `emerge -pqv '=app- > text/poppler-0.32.0::gentoo'`. >> * The complete build log is located at '/var/log/portage/app- > text:poppler-0.32.0:20150901-171555.log'. >> * For convenience, a symlink to the build log is located at > '/var/tmp/portage/app-text/poppler-0.32.0/temp/build.log'. >> * The ebuild environment file is located at '/var/tmp/portage/app- > text/poppler-0.32.0/temp/environment'. >> * Working directory: '/var/tmp/portage/app- > text/poppler-0.32.0/work/poppler-0.32.0_build' >> * S: '/var/tmp/portage/app-text/poppler-0.32.0/work/poppler-0.32.0' >> >> There is a but filed about poppler: >> https://bugs.gentoo.org/show_bug.cgi?id=529182 >> >> Apparently the solution is to use: >> MAKEOPTS="-j1" >> >> How do you use it? >> >> MAKEOPTS="-j1" emerge -1aNDv app-text/poppler >> >> It failed as well. Re-emerging it doesn't help. > > That bug has nothing to do with your error. > Try rebuilding media-libs/tiff or even better go back to your other posts and > follow the advice given to address the root of the problem. media-libs/tiff rebuild just fine. I have run: perl-cleaner --all and I think it might have fix something; now poppler installed OK and app-text/texlive-core installed as well. Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/01/2015 04:55 PM, Fernando Rodriguez wrote: > On Tuesday, September 01, 2015 4:04:34 PM the...@sys-concept.com wrote: >> System fails to upgrade to audacity-2.0.5 >> >> -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype -lasound -lrt >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_finish_decompress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_CreateDecompress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_resync_to_restart@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_CreateCompress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_read_scanlines@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_read_header@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_finish_compress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_start_compress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_write_scanlines@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_start_decompress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_set_quality@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_destroy_decompress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_set_defaults@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_destroy_compress@LIBJPEG_6.2' >> /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to > `jpeg_std_error@LIBJPEG_6.2' >> collect2: error: ld returned 1 exit status >> Makefile:301: recipe for target '../audacity' failed >> make[1]: *** [../audacity] Error 1 >> make[1]: Leaving directory '/var/tmp/portage/media- > sound/audacity-2.0.5/work/audacity-src-2.0.5/src' >> Makefile:21: recipe for target 'audacity' failed >> make: *** [audacity] Error 2 >> * ERROR: media-sound/audacity-2.0.5::gentoo failed (compile phase): >> * emake failed >> * >> * If you need support, post the output of `emerge --info '=media- > sound/audacity-2.0.5::gentoo'`, >> * the complete build log and the output of `emerge -pqv '=media- > sound/audacity-2.0.5::gentoo'`. >> * The complete build log is located at '/var/log/portage/media- > sound:audacity-2.0.5:20150901-215644.log'. >> * For convenience, a symlink to the build log is located at > '/var/tmp/portage/media-sound/audacity-2.0.5/temp/build.log'. >> * The ebuild environment file is located at '/var/tmp/portage/media- > sound/audacity-2.0.5/temp/environment'. >> * Working directory: '/var/tmp/portage/media- > sound/audacity-2.0.5/work/audacity-src-2.0.5' >> * S: '/var/tmp/portage/media-sound/audacity-2.0.5/work/audacity-src-2.0.5' > > Since you're too stupid to follow advice, you need to rebuild *EVERYTHING* > that linked against libjpeg (in this case x11-libs/wxGTK). This kind of language does not belong here. If you can not refrain yourself making sarcastic remarks don't make any comments. I would appreciate you stop reading my posts at all. I don't belong to Gentoo community.
[gentoo-user] audacity-2.0.5 failed to compile
System fails to upgrade to audacity-2.0.5 -lgobject-2.0 -lglib-2.0 -lfontconfig -lfreetype -lasound -lrt /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_finish_decompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_CreateDecompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_resync_to_restart@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_CreateCompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_read_scanlines@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_read_header@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_finish_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_start_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_write_scanlines@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_start_decompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_set_quality@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_destroy_decompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_set_defaults@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_destroy_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_std_error@LIBJPEG_6.2' collect2: error: ld returned 1 exit status Makefile:301: recipe for target '../audacity' failed make[1]: *** [../audacity] Error 1 make[1]: Leaving directory '/var/tmp/portage/media-sound/audacity-2.0.5/work/audacity-src-2.0.5/src' Makefile:21: recipe for target 'audacity' failed make: *** [audacity] Error 2 * ERROR: media-sound/audacity-2.0.5::gentoo failed (compile phase): * emake failed * * If you need support, post the output of `emerge --info '=media-sound/audacity-2.0.5::gentoo'`, * the complete build log and the output of `emerge -pqv '=media-sound/audacity-2.0.5::gentoo'`. * The complete build log is located at '/var/log/portage/media-sound:audacity-2.0.5:20150901-215644.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/media-sound/audacity-2.0.5/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/media-sound/audacity-2.0.5/temp/environment'. * Working directory: '/var/tmp/portage/media-sound/audacity-2.0.5/work/audacity-src-2.0.5' * S: '/var/tmp/portage/media-sound/audacity-2.0.5/work/audacity-src-2.0.5' -- Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_CreateCompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_read_scanlines@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_read_header@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_finish_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_start_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_write_scanlines@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_start_decompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_set_quality@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_destroy_decompress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_set_defaults@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_destroy_compress@LIBJPEG_6.2' /usr/lib64/libwx_gtk2u_core-2.8.so: undefined reference to `jpeg_std_error@LIBJPEG_6.2' collect2: error: ld returned 1 exit status Makefile:301: recipe for target '../audacity' failed make[1]: *** [../audacity] Error 1 make[1]: Leaving directory '/var/tmp/portage/media-sound/audacity-2.0.5/work/audacity-src-2.0.5/src' Makefile:21: recipe for target 'audacity' failed make: *** [audacity] Error 2 * ERROR: media-sound/audacity-2.0.5::gentoo failed (compile phase): * emake failed Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/03/2015 07:19 AM, Alan McKinnon wrote: > On 03/09/2015 15:06, Alec Ten Harmsel wrote: >> On Wed, Sep 02, 2015 at 02:25:47PM -0600, the...@sys-concept.com wrote: >>> I've tried to post a "log" file to the http://pastebin.com/ you >>> suggested but I can only paste the limited size file (not upload it). >>> Since the txt file is 7.4Mb in size, I can not paste it. >>> Though, I have compress the file as tar.gz (so it is only 267kB) >>> here is the link: >>> >>> http://www.sysconcept.ca/audacity_error.tar.gz I've changed the permission on this file to: apache:apache and rw the link above should work. >>> >>> If somebody whats to look at it, I appreciate it. >>> Meanwhile, I'll be following other folks suggestion and see if I can get >>> a positive result to this error. >>> >>> Thelma >> >> I tried to download it but got a 403 Forbidden HTTP error. >> >> This might be a bad suggestion, but if you have a lot of time, it might >> be easier to uninstall audacity and any other packages that have been >> giving you problems, then `emerge -uDN --with-bdeps=y @world`, then >> `emerge --depclean', and then install all the stuff you need. >> >> I believe someone else mentioned checking /var/lib/portage/world and >> making sure that it doesn't contain any virtuals - it might also be good >> to remove from it any software that you do not directly need. > > > Even better - Thelma should just post the entire /var/lib/portage/world > file so we can advise what to take out. > > Most newbies clutter up their world needlessly, it takes a bit of > practice to grok what should be in their Yes, the system is few years old. It make me wonder if the problem might be cause by me emerging: emerge -avC libjpeg-turbo emerge -av1 media-libs/jpeg:0 media-libs/jpeg:62 I'm using obsolete "nxclient-3.5.0.7" as I need it and there is no good replacement alternative on Gentoo. Here is /var/lib/portage/world app-admin/gkrellm app-admin/syslog-ng app-admin/tmpwatch app-admin/webapp-config app-arch/cabextract app-arch/xarchiver app-benchmarks/cpuburn app-cdr/cdrtools app-cdr/dvd+rw-tools app-crypt/gnupg app-crypt/pinentry app-dicts/myspell-en app-editors/leafpad app-editors/nano app-emulation/dosemu app-emulation/virtualbox-bin app-emulation/virtualbox-modules app-forensics/chkrootkit app-forensics/rkhunter app-misc/ca-certificates app-office/glabels app-office/gnucash app-office/gnumeric app-office/openoffice-bin app-portage/cfg-update app-portage/eix app-portage/genlop app-portage/gentoolkit app-portage/portage-utils app-text/a2ps app-text/acroread app-text/dos2unix app-text/enscript app-text/evince app-text/flpsed app-text/ghostscript-gpl app-text/gv app-text/lcdf-typetools app-text/mpage app-text/pdfjam app-text/pdfshuffler app-text/pdftk app-text/texi2html app-text/wdiff dev-db/mysql dev-db/phpmyadmin dev-db/postgresql dev-db/postgresql:9.0 dev-db/postgresql:9.1 dev-java/icedtea-bin dev-java/java-config dev-java/oracle-jdk-bin dev-lang/lua dev-lang/php dev-lang/python dev-lang/swig dev-lang/tcl dev-lang/tk dev-libs/check dev-libs/libnl dev-libs/openssl dev-perl/DBD-Pg dev-perl/GStreamer dev-php/smarty dev-python/cython dev-python/dbus-python dev-python/django dev-python/pycairo dev-python/pygobject dev-python/pygtk dev-python/pyxml dev-tcltk/expect dev-tex/feynmf dev-util/byacc dev-util/ccache dev-util/meld dev-util/unifdef dev-vcs/git dev-vcs/subversion games-action/supertuxkart games-arcade/supertux games-arcade/xscavenger games-kids/tuxmathscrabble gnome-base/gconf mail-client/mutt mail-client/thunderbird mail-filter/procmail mail-filter/spamassassin mail-mta/postfix media-fonts/arphicfonts media-fonts/baekmuk-fonts media-fonts/corefonts media-fonts/kochi-substitute media-fonts/ttf-bitstream-vera media-gfx/gimp media-gfx/ristretto media-gfx/sane-backends media-gfx/xsane media-gfx/xv media-libs/gstreamer media-libs/libcuefile media-libs/libdvbpsi media-libs/libid3tag media-libs/libmikmod media-libs/libmodplug media-libs/libpng media-libs/libreplaygain media-libs/libsdl media-libs/mesa media-libs/openjpeg media-libs/schroedinger media-libs/tiff media-sound/alsa-utils media-sound/audacity media-sound/cdparanoia media-sound/cmus media-sound/musepack-tools media-sound/sox media-video/dirac media-video/dvdbackup media-video/gtk-recordmydesktop media-video/kino media-video/motion media-video/mplayer media-video/vlc media-video/xine-ui net-analyzer/gnu-netcat net-analyzer/httping net-analyzer/nagios net-analyzer/nagios-core net-analyzer/nmap net-analyzer/tcpdump net-dialup/mgetty net-dns/ddclient net-fs/nfs-utils net-fs/samba net-ftp/gftp net-libs/adns net-libs/libvncserver net-libs/openslp net-mail/fetchmail net-mail/tnef net-misc/asterisk net-misc/dhcpcd net-misc/hylafaxplus net-misc/iperf net-m
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/03/2015 08:28 AM, Neil Bothwick wrote: > On Thu, 03 Sep 2015 07:56:33 -0600, the...@sys-concept.com wrote: > >> Here is /var/lib/portage/world > > This contains quite a lot of libraries. As a rule of thumb, you should > rarely have libraries in world as you don't use them - the software you > have in world uses them. You can quickly clean them out with > > sed -i /libs\//d /var/lib/portage/world After running above I get: sed: -e expression #1, char 7: unknown command: `/' Shouldn't it be: sed -i /libs\/d /var/lib/portage/world This one doesn't produce any result. > > Then run emerge --depclean --ask to clear out any that are no longer > needed. Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/03/2015 09:26 AM, the...@sys-concept.com wrote: > On 09/03/2015 08:28 AM, Neil Bothwick wrote: >> On Thu, 03 Sep 2015 07:56:33 -0600, the...@sys-concept.com wrote: >> >>> Here is /var/lib/portage/world >> >> This contains quite a lot of libraries. As a rule of thumb, you should >> rarely have libraries in world as you don't use them - the software you >> have in world uses them. You can quickly clean them out with >> >> sed -i /libs\//d /var/lib/portage/world > > After running above I get: > sed: -e expression #1, char 7: unknown command: `/' > > Shouldn't it be: > sed -i /libs\/d /var/lib/portage/world > > This one doesn't produce any result. Yes, it worked got rid of all "libs" form world. Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/03/2015 01:30 PM, Mick wrote: > On Thursday 03 Sep 2015 20:11:40 the...@sys-concept.com wrote: >> When I boot the computer I see some complain message about "jpeg" but it >> scroll too fast, couldn't read it. Is there a way to pause the boot >> process? > > Configure your /etc/rc.conf temporarily to capture a log file and reboot > before you check the output. I solved this one an old fashion way :-) capture the boot process with video camera. It was nothing serious, "slim" was complaining about jpeg library; I re-emerge slim. Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
t app-portage/portage-utils app-text/a2ps app-text/acroread app-text/dos2unix app-text/enscript app-text/evince app-text/flpsed app-text/ghostscript-gpl app-text/gv app-text/lcdf-typetools app-text/mpage app-text/pdfjam app-text/pdfshuffler app-text/pdftk app-text/texi2html app-text/wdiff dev-db/mysql dev-db/phpmyadmin dev-db/postgresql dev-db/postgresql:9.0 dev-db/postgresql:9.1 dev-java/icedtea-bin dev-java/java-config dev-java/oracle-jdk-bin dev-lang/lua dev-lang/php dev-lang/python dev-lang/swig dev-lang/tcl dev-lang/tk dev-perl/DBD-Pg dev-perl/Log-Agent dev-perl/extutils-pkgconfig dev-tcltk/expect dev-tex/feynmf dev-util/byacc dev-util/ccache dev-util/meld dev-util/unifdef dev-vcs/git dev-vcs/subversion games-action/supertuxkart games-arcade/supertux games-arcade/xscavenger games-kids/tuxmathscrabble mail-client/mutt mail-client/thunderbird mail-filter/procmail mail-filter/spamassassin mail-mta/postfix media-fonts/arphicfonts media-fonts/baekmuk-fonts media-fonts/corefonts media-fonts/kochi-substitute media-fonts/ttf-bitstream-vera media-gfx/gimp media-gfx/ristretto media-gfx/sane-backends media-gfx/xsane media-gfx/xv media-libs/soxr media-sound/alsa-utils media-sound/audacity media-sound/cdparanoia media-sound/cmus media-sound/musepack-tools media-sound/sox media-video/dirac media-video/dvdbackup media-video/gtk-recordmydesktop media-video/kino media-video/motion media-video/mplayer media-video/vlc media-video/xine-ui net-analyzer/gnu-netcat net-analyzer/httping net-analyzer/nagios net-analyzer/nagios-core net-analyzer/nmap net-analyzer/tcpdump net-dialup/mgetty net-dns/ddclient net-fs/nfs-utils net-fs/samba net-ftp/gftp net-libs/libvncserver net-libs/openslp net-mail/fetchmail net-mail/tnef net-misc/asterisk net-misc/dhcpcd net-misc/hylafaxplus net-misc/iperf net-misc/nx net-misc/nxclient net-misc/nxserver-freenx net-misc/openvpn net-misc/rdate net-misc/socat net-misc/telnet-bsd net-misc/urlview net-misc/whois net-print/cups net-print/cups-pdf net-print/fax4cups net-wireless/bluez sci-calculators/qalculate-gtk sys-apps/ack sys-apps/acl sys-apps/dmidecode sys-apps/ethtool sys-apps/hdparm sys-apps/hwinfo sys-apps/lshw sys-apps/mlocate sys-apps/pciutils sys-apps/portage sys-apps/setserial sys-apps/xinetd sys-boot/grub sys-boot/grub:0 sys-devel/crossdev sys-devel/gcc sys-devel/gcc:4.5 sys-devel/icecream sys-fs/eudev sys-fs/fuse sys-fs/lvm2 sys-fs/sshfs-fuse sys-kernel/genkernel sys-kernel/gentoo-sources sys-kernel/gentoo-sources:3.10.17 sys-kernel/gentoo-sources:3.5.7 sys-power/apcupsd sys-process/at sys-process/htop sys-process/vixie-cron virtual/jdk www-client/firefox-bin www-client/links www-client/seamonkey-bin www-servers/apache x11-base/xorg-x11 x11-drivers/nvidia-drivers x11-misc/gxmessage x11-misc/shared-mime-info x11-misc/slim x11-terms/rxvt-unicode x11-terms/xfce4-terminal x11-themes/gtk-chtheme x11-themes/tango-icon-theme x11-themes/xfwm4-themes xfce-base/thunar xfce-base/xfce4-meta xfce-base/xfce4-session xfce-extra/thunar-archive-plugin xfce-extra/tumbler xfce-extra/xfce4-mixer xfce-extra/xfce4-mount-plugin xfce-extra/xfce4-screenshooter xfce-extra/xfce4-sensors-plugin xfce-extra/xfce4-taskmanager xfce-extra/xfce4-verve-plugin Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
On 09/03/2015 01:24 PM, Mick wrote: > On Thursday 03 Sep 2015 15:27:26 Alan McKinnon wrote: >> On 03/09/2015 15:56, the...@sys-concept.com wrote: > >>> sys-kernel/gentoo-sources >>> sys-kernel/gentoo-sources:3.10.17 >>> sys-kernel/gentoo-sources:3.5.7 >> >> Wee bit behind on kernel versions... > > Yes, only the first is needed, *unless* thelma wants to keep 3.10.17 and > 3.5.7 > for some reason. Keeping in world only: sys-kernel/gentoo-sources will keep the newest kernel in world and unmerge 3.10.17 the one I'm using Thelma
[gentoo-user] /var/tmp/notmpfs - does not exist
When I try to run emerge on my system I get: ... * Your boot partition was not mounted at /boot, so it will be automounted for you. * Files will be installed there for grub to function correctly. >>> Running pre-merge checks for dev-db/mysql-5.6.26 >>> Running pre-merge checks for net-libs/webkit-gtk-2.4.9-r200 >>> Running pre-merge checks for mail-client/thunderbird-38.2.0 The directory specified in your PORTAGE_TMPDIR variable, '/var/tmp/notmpfs', does not exist. Please create this directory or correct your PORTAGE_TMPDIR setting. my fstab: ... proc/proc procdefaults0 0 shm /dev/shmtmpfs defaults,nodev,nosuid,mode=1777 0 0 tmpfs /var/tmp/portagetmpfs defaults 0 0 ll /var/tmp/ total 0 drwxrwxrwt 4 portage portage 80 Sep 4 23:04 portage Do I need to create dir: /var/tmp/notmpfs ? My other systems did not show any such message. -- Thelma
Re: [SOLVED] [gentoo-user] poppler-0.32.0 - error
On 09/06/2015 01:40 PM, Fernando Rodriguez wrote: [snip] > >> Layman -L >> doesn't list it either > > That's normal because it's not a layman managed overlay. Just make sure to > list it on your repos.conf. When you emerge it with the -v option it should > show your overlay name instead of gentoo next to the package name. I think you are talking about: /etc/portage/repos.conf/local.conf In that file I have: cat /etc/portage/repos.conf/local.conf [local_portage_nxclient] location = /usr/local/portage masters = gentoo auto-sync = no Thelma.
Re: [SOLVED] [gentoo-user] poppler-0.32.0 - error
Thelma On 09/06/2015 01:40 PM, Fernando Rodriguez wrote: [snip] >> Though, I can not "manifest" the ebuild it can not be found: > nxclient-3.5.0-7.x86_64.tar.gz >> ebuild /usr/local/portage/net-misc/nxclient/nxclient-3.5.0.7.ebuild manifest > > Change the SRC_URI variable on the ebuild to point to one of those mirrors. > If > you already have it on distfiles it probably doesn't find it because the > SRC_URI > has a different filename. > >> Layman -L >> doesn't list it either > > That's normal because it's not a layman managed overlay. Just make sure to > list it on your repos.conf. When you emerge it with the -v option it should > show your overlay name instead of gentoo next to the package name. > > If it's a binary package you could also just add the dependencies to your > world file or to a set and just unpack it manually to /opt. > > BTW. It is on the attic, and it does requires extra files. Just copy the > whole > directory from the attic, including files/, then update the SRC_URI and the > jpeg dependency. Hmm I don't know which directory you talking about, is it: https://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/nxclient/files/?hideattic=0 I just downloaded: nxclient-3.5.0.7.ebuild and have only two files in: /usr/local/portage/net-misc/nxclient -rw-r--r-- 1 root root 1162 Sep 6 17:21 Manifest -rw-r--r-- 1 root root 1991 Sep 6 17:21 nxclient-3.5.0.7.ebuild > https://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/nxclient/?hideattic=0 > >> Various places have it, like: >> https://baobabmaster.unige.ch/download/linux/ I removed: media-libs/jpeg and emerged libjpeg-turbo I think it worked, I changed in: nxclient-3.5.0.7.ebuild ... SRC_URI="http://download.vrdc.cornell.edu/extras/other/nxclient-3.5.0-7.x86_64.tar.gz; RDEPEND="dev-libs/expat >=dev-libs/openssl-0.9.8 media-libs/audiofile media-libs/libjpeg-turbo ... Generated new manifest and it compiled just fine. This solved the problem with audacity-2.0.5 I had a problem previously; now it compiles just fine. Thanks, Thelma
Re: [gentoo-user] /var/tmp/notmpfs - does not exist
On 09/04/2015 11:52 PM, Dale wrote: > the...@sys-concept.com wrote: >> When I try to run emerge on my system I get: >> >> ... >> * Your boot partition was not mounted at /boot, so it will be automounted >> for you. >> * Files will be installed there for grub to function correctly. >>>>> Running pre-merge checks for dev-db/mysql-5.6.26 >>>>> Running pre-merge checks for net-libs/webkit-gtk-2.4.9-r200 >>>>> Running pre-merge checks for mail-client/thunderbird-38.2.0 >> The directory specified in your PORTAGE_TMPDIR variable, '/var/tmp/notmpfs', >> does not exist. Please create this directory or correct your PORTAGE_TMPDIR >> setting. >> >> my fstab: >> ... >> proc /proc procdefaults >> 0 0 >> shm /dev/shmtmpfs >> defaults,nodev,nosuid,mode=1777 0 0 >> tmpfs/var/tmp/portagetmpfs defaults 0 >> 0 >> >> >> ll /var/tmp/ >> total 0 >> drwxrwxrwt 4 portage portage 80 Sep 4 23:04 portage >> >> Do I need to create dir: /var/tmp/notmpfs ? >> My other systems did not show any such message. >> > > > Are you trying to have portage's work directory on tmpfs? If so, I have > this in fstab: > > tmpfs /var/tmp/portage tmpfs noatime > 0 0 > > I don't have anything in fstab for PORTAGE_TMPDIR tho. According to > this, you do need to create the directory if you are making exceptions. > > https://wiki.gentoo.org/wiki/Portage_TMPDIR_on_tmpfs#Per-Package_Choices_at_Compile_Time > > |root #||mkdir /var/tmp/notmpfs | > |root #||chown portage:portage /var/tmp/notmpfs | > |root #||chmod 775 /var/tmp/notmpfs > > Hope that helps. > > Dale I had this configuration already set: /etc/portage/env/notmpfs.conf PORTAGE_TMPDIR="/var/tmp/notmpfs" /etc/portage/package.env mail-client/thunderbird notmpfs.conf www-client/firefox notmpfs.conf What was missing was only directory: /var/tmp/notmpfs I'll remove "tmpfs" from fstab Thelma.
Re: [gentoo-user] /var/tmp/notmpfs - does not exist
On 09/05/2015 08:30 AM, Dale wrote: [snip] > > > Well, you can leave that in fstab for when you can use it. This is my > understanding. Putting portage's work directory on tmpfs speeds up the > compile because it is done in memory instead of a hard drive. Thing is, > there may be times when some packages don't have enough space to > compile, you run out of tmpfs basically. One example, libreoffice which > uses a lot. I've also found that Firefox also uses a lot of space too. > Of course, I have enough memory at the moment for both to compile. You > may not tho. > > When you don't have enough for say Libreoffice to compile on tmpfs, you > then set a exception for that package. That is where notmpfs comes in. > That allows you to use tmpfs for all the other packages but puts it back > on spinning rust for that package, and any other package you set it for > such as Firefox. > > So, if you have the memory even for large packages like Libreoffice, > just remove the notmpfs part and leave fstab like it was. Basically, > ignore that part of the wiki since you don't need to set that. If you > have say 6GBs of ram, you would need that line in fstab AND the part > about notmpfs. You would not be able to compile Libreoffice with that > small amount of ram and even Firefox may not either. > > Does that clear up the muddy waters any or am I making it worse? Maybe > the better question would be, how much memory does your rig have on it? > Then folks can advise on where to go based on that. ;-) > > Dale Thanks Dale for explanation. I have 8GB RAM and with fstab: tmpfs /var/tmp/portagetmpfs defaults 0 0 it creates 3.9Gb ram disk but that is not enough for firefox I think my default setup was OK with: /etc/portage/package.env /etc/portage/env/notmpfs.conf Thelma
[gentoo-user] slot conflict - xfce-base/libxfce4util
I'm confused sometimes as to these slot conflicts, eg. I'm getting: !!! Multiple package instances within a single package slot have been pulled !!! into the dependency graph, resulting in a slot conflict: xfce-base/libxfce4util:0 (xfce-base/libxfce4util-4.10.1:0/0::gentoo, installed) pulled in by =xfce-base/libxfce4util-4.12:= required by (xfce-base/libxfce4ui-4.12.1-r2:0/0::gentoo, ebuild scheduled for merge) How do I go about unmerging/selecting one of them? -- Thelma
Re:[SOLVED] [gentoo-user] poppler-0.32.0 - error
On 09/05/2015 12:23 PM, Alan McKinnon wrote: > On 05/09/2015 20:17, the...@sys-concept.com wrote: >> I'm trying to re-emerge poppler but I'm getting error message >> Here is the message log: >> http://pastebin.com/Q5EKLW8U > > Don't use pastebin here. It's considered rude. > Post the relevant portion of the error. Apology about it. I was under impression it might look cleaner (less clapper if I post a link to complete log). > I did look at it though, and it's full of jpeg errors. So you need to go > back to your very first post on this subject about a week ago and follow > the advice there, not some other variant of your own invention. Yes, that was correct hint. Fernando was correct, running: media-libs/tiff perl-cleaner --all seem to solve this problem. > > >> >> I've tried to run: >> perl-cleaner --all (but that did not solve anything) >> >> * Finding left over modules and header >> >> * The following files remain. These were either installed by hand >> * or edited. This script cannot deal with them. >> >> /usr/lib64/perl5/5.12.4/x86_64-linux/Encode/ConfigLocal.pm >> /usr/lib64/perl5/vendor_perl/5.12.4/XML/SAX/ParserDetails.ini >> /usr/lib64/perl5/vendor_perl/5.18.2/XML/SAX/ParserDetails.ini >> /usr/lib64/perl5/vendor_perl/5.16.3/XML/SAX/ParserDetails.ini > > Read the message. Either you put them there yourself (using cpan or > such), or the files were edited since being installed. Either way, the > script is refusing to touch them (wisely) > > Those files are ancient and not needed. Delete them, and all empty > parent directories I'll look into it. Thelma
Re: [SOLVED] [gentoo-user] poppler-0.32.0 - error
On 09/05/2015 02:30 PM, Fernando Rodriguez wrote: > On Saturday, September 05, 2015 12:46:02 PM the...@sys-concept.com wrote: >> On 09/05/2015 12:23 PM, Alan McKinnon wrote: >>> On 05/09/2015 20:17, the...@sys-concept.com wrote: >>>> I'm trying to re-emerge poppler but I'm getting error message >>>> Here is the message log: >>>> http://pastebin.com/Q5EKLW8U >>> >>> Don't use pastebin here. It's considered rude. >>> Post the relevant portion of the error. >> >> Apology about it. I was under impression it might look cleaner (less >> clapper if I post a link to complete log). >> >>> I did look at it though, and it's full of jpeg errors. So you need to go >>> back to your very first post on this subject about a week ago and follow >>> the advice there, not some other variant of your own invention. >> >> Yes, that was correct hint. >> Fernando was correct, running: >> media-libs/tiff >> perl-cleaner --all > > I was right that rebuilding libtiff (not perl-cleaner) will get you past that > ebuild, but my advice was the same you just received, go back to the *VERY > FIRST* post on the subject and fix the root of the problem. You will see that > error again (or worse runtime errors) until you fix it. > > Hint: It was Alan that gave you the solution. You chose to fix it by > installing > an incompatible jpeg implementation. That needs to be undone. It seems to me Alan solution: emerge -avC libjpeg-turbo emerge -av1 media-libs/jpeg:0 media-libs/jpeg:62 It will come to hunt me. It allow me to keep going with upgrades as I couldn't find any better solution. Currently I have media-libs/jpeg installed in two slots: media-libs/jpeg-6b-r12:62 media-libs/jpeg-8d-r1:0 I can not get rid of "media-libs/jpeg-6b-r12" due to dependency net-misc/nxclient-3.5.0.7 (=media-libs/jpeg-6*) I need "nxclient" for now until I find better solution. According to: equery d media-libs/jpeg-8d-r1 * These packages depend on media-libs/jpeg-8d-r1: virtual/jpeg-0-r2 (>=media-libs/jpeg-8d-r1:0 Maybe I could uninstall jpeg-8d-r1 as only "virtual/jpeg-0-r2" depends on it. Thelma
[gentoo-user] poppler-0.32.0 - error
ssl startup-notification svg tcpd tetexspell thunar tiff truetype type1 udev udisks unicode upower usb vorbis wxwidgets x264 xcb xml xv xvid zlib" ABI_X86="64 32" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_! dbm authn_ default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="aes avx fma4 mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 xop" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="pr! esenter-co nsole presenter-minimizer" LINGUAS="en" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5 php5-6" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby19 ruby20" SANE_BACKENDS="epson2" USERLAND="GNU" VIDEO_CARDS="nvidia nouveau" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CC, CPPFLAGS, CTARGET, CXX, INSTALL_MASK, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON -- Thelma
Re: [gentoo-user] /var/tmp/notmpfs - does not exist
On 09/05/2015 08:16 AM, Alan McKinnon wrote: > On 05/09/2015 16:08, the...@sys-concept.com wrote: >> On 09/04/2015 11:52 PM, Dale wrote: >>> the...@sys-concept.com wrote: >>>> When I try to run emerge on my system I get: >>>> >>>> ... >>>> * Your boot partition was not mounted at /boot, so it will be automounted >>>> for you. >>>> * Files will be installed there for grub to function correctly. >>>>>>> Running pre-merge checks for dev-db/mysql-5.6.26 >>>>>>> Running pre-merge checks for net-libs/webkit-gtk-2.4.9-r200 >>>>>>> Running pre-merge checks for mail-client/thunderbird-38.2.0 >>>> The directory specified in your PORTAGE_TMPDIR variable, >>>> '/var/tmp/notmpfs', >>>> does not exist. Please create this directory or correct your >>>> PORTAGE_TMPDIR setting. >>>> >>>> my fstab: >>>> ... >>>> proc /proc procdefaults >>>> 0 0 >>>> shm/dev/shmtmpfs >>>> defaults,nodev,nosuid,mode=1777 0 0 >>>> tmpfs /var/tmp/portagetmpfs defaults 0 >>>> 0 >>>> >>>> >>>> ll /var/tmp/ >>>> total 0 >>>> drwxrwxrwt 4 portage portage 80 Sep 4 23:04 portage >>>> >>>> Do I need to create dir: /var/tmp/notmpfs ? >>>> My other systems did not show any such message. >>>> >>> >>> >>> Are you trying to have portage's work directory on tmpfs? If so, I have >>> this in fstab: >>> >>> tmpfs /var/tmp/portage tmpfs noatime >>> 0 0 >>> >>> I don't have anything in fstab for PORTAGE_TMPDIR tho. According to >>> this, you do need to create the directory if you are making exceptions. >>> >>> https://wiki.gentoo.org/wiki/Portage_TMPDIR_on_tmpfs#Per-Package_Choices_at_Compile_Time >>> >>> |root #||mkdir /var/tmp/notmpfs | >>> |root #||chown portage:portage /var/tmp/notmpfs | >>> |root #||chmod 775 /var/tmp/notmpfs >>> >>> Hope that helps. >>> >>> Dale >> >> I had this configuration already set: >> /etc/portage/env/notmpfs.conf >> PORTAGE_TMPDIR="/var/tmp/notmpfs" >> >> /etc/portage/package.env >> mail-client/thunderbird notmpfs.conf >> www-client/firefox notmpfs.conf >> >> What was missing was only directory: >> /var/tmp/notmpfs >> >> I'll remove "tmpfs" from fstab > > > > I don't understand why you have that set of configs at all, it is > needlessly complicated. What is all that stuff about "notmpfs"? > > You do that one of two ways: > > 1. If you don't have enough spare RAM or need to keep your build dir on > a spinning disk, then do nothing. Add nothing to fstab, add nothing to > env configs for portage, do not mount anything at /var/tmp/portage. The > build dir will be on the same volume as /var/tmp > > 2. If you do have the spare RAM, by all means use a tmpfs - it speeds > build times up amazingly. Put a tmpfs entry in fstab and nothing else. > Voila, instant speed up. Libreoffice build time is halved. > > 2a. If you have spare RAM but not gobs and gobs of it (eg 8G tmpfs is > pushing it), then stick with #2, but add specific env overrides for huge > packages like libreoffice and firefox to use some other temp dir on disk > for building and not /var/tmp/portage I have 8Gb RAM and this setup I had was to compile larger ebuilds like: firefox and thunderbird tmpfs /var/tmp/portagetmpfs defaults 0 0 The above in fstab creates tmpfs 3.9G 39M 3.9G 1% /var/tmp/portage When I removed my setup with /etc/portage/package.env /etc/portage/env/notmpfs.conf Firefox complains it can not compile as there is not enough disk space: * Checking for at least 4 GiB disk space at "/var/tmp/portage/www-client/firefox-38.2.0/temp" ... What is my best option? Go back to previous setup with package.env notmpfs.conf or increase tmpfs to 5Gb eg: tmpfs /var/tmp/portagetmpfs rw,size=5G 0 0 Thelma
Re: [gentoo-user] audacity-2.0.5 failed to compile
Thelma -- Regards, Joseph Kmiec Sys. Concept Inc. http://www.sysconcept.ca p: 866-479-1270 / 780-479-1270 ext.55 f: 780-471-5665 | GPG KeyID: 7B4A78C2 On 09/01/2015 10:57 PM, wraeth wrote: > On 02/09/15 14:24, the...@sys-concept.com wrote: >> On 09/01/2015 08:57 PM, wraeth wrote: >>> On 02/09/15 12:23, Fernando Rodriguez wrote: >>> >>>> He was told what the problem was on his first post about >>>> libjpeg-turbo, he didn't just ignore it but posted the wrong >>>> solution with a big SOLVED on the subject that only serves to >>>> mislead future users of this list. On his last post about this >>>> same error (different package) I politely told him to go back >>>> and follow the advise on that post, again he ignored it and >>>> posted a bogus solution (it worked because he rebuilt tiff, >>>> perl had nothing to do with it). revdep-rebuild may (or may >>>> not) fix it now, but the right solution is to remove or fix the >>>> obsolete package to depend on virtual/jpeg, update world >>>> properly, and then revdep-rebuild to undo this mess. > >> Apology if I didn't most enough information. I know should have >> post "emerge --info" but when it comes to error log. It is very, >> very long and email wouldn't be able to accept it; so I cat the >> ending message as this is the point it stop compiling. > > For large files, you can either paste the file to a pastebin service > and give us the URL, compress it with gzip or bzip2 and attach that, > or give us the last 250 lines or so. > > The reason for this is because the error you see in the logs may not > be the first error or the one that is causing the build to fail - the > more information we have, the more information available to help > resolve an issue. > > Either way, no harm done. > >> Emergeing "x11-libs/wxGTK" did not help. > > I haven't been following along with the threads, but as far as I > understand there's an obsolete package that has a dependency that > conflicts with newer packages. If that's the case, you would need to > deal with that obsolete package. > > There's also been suggestion of using revdep-rebuild - have you tried > that? Thank you all for your suggestions I receive it, I'll try to follow them through and see if I get a positive result to this error. I've tried to post a "log" file to the http://pastebin.com/ you suggested but I can only paste the limited size file (not upload it). Since the txt file is 7.4Mb in size, I can not paste it. Though, I have compress the file as tar.gz (so it is only 267kB) here is the link: http://www.sysconcept.ca/audacity_error.tar.gz If somebody whats to look at it, I appreciate it. Meanwhile, I'll be following other folks suggestion and see if I can get a positive result to this error. Thelma
Re: *****SPAM***** Re: [gentoo-user] texlive-core - poppler / xpdf missing library
On 09/01/2015 09:47 AM, Alec Ten Harmsel wrote: > On Tue, Sep 01, 2015 at 07:47:56AM -0600, the...@sys-concept.com wrote: >> I'm emerging texlive-core and it complains on missing libraries: >> >> >> >> emerge -1q luatex texlive-core >> [ebuild N] dev-tex/luatex-0.70.1-r2 >> [ebuild U ] app-text/texlive-core-2014-r4 [2012-r1] >> [blocks B ] > ("> [blocks B ] dev-tex/luatex ("dev-tex/luatex" is blocking >> app-text/texlive-core-2014-r4) > > texlive-core needs to be updated, not installed with --oneshot. Can you > try running `emerge --update --newuse --deep --with-bdeps=y @world'? > > Alec > > I run unmerged all "texlive" application and run: `emerge --update --newuse --deep --with-bdeps=y @world' and coming up with the same error message: checking requested system `poppler' library... failed checking requested system `xpdf' library... failed checking requested system `zziplib' library... ok configure: error: some requested system libraries failed !!! Please attach the following file when seeking support: !!! /var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build/config.log * ERROR: app-text/texlive-core-2014-r4::gentoo failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 2887: Called econf '-C' '--bindir=/usr/bin' '--datadir=/var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build' '--with-system-freetype2' '--with-system-zlib' '--with-system-libpng' '--with-system-xpdf' '--with-system-poppler' '--with-system-teckit' '--with-teckit-includes=/usr/include/teckit' '--with-system-kpathsea' '--with-kpathsea-includes=/usr/include' '--with-system-icu' '--with-system-ptexenc' '--with-system-harfbuzz' '--with-system-icu' '--with-system-graphite2' '--with-system-cairo' '--with-system-pixman' '--with-system-zziplib' '--with-system-libpaper' '--without-texinfo' '--disable-dialog' '--disable-multiplatform' '--enable-epsfwin' '--enable-mftalkwin' '--enable-regiswin' '--enable-tektronixwin' '--enable-unitermwin' '--with-ps=gs' '--disable-psutils' '--disable-t1utils' '--enable-ipc' '--disable-biber' '--disable-bibtex-x' '--disable-dvipng' '--disable-dvipsk' '--disable-chktex' '--disable-lcdf-typetools' '-! -disable-p dfopen' '--disable-ps2eps' '--disable-ps2pkm' '--disable-detex' '--disable-ttf2pk2' '--disable-tex4htk' '--disable-cjkutils' '--disable-xdvik' '--disable-xindy' '--enable-luatex' '--disable-dvi2tty' '--disable-dvisvgm' '--disable-vlna' '--enable-shared' '--disable-native-texlive-build' '--disable-largefile' '--disable-xetex' '--disable-ptex' '--disable-eptex' '--disable-uptex' '--disable-euptex' '--disable-mendexk' '--disable-makejvf' '--disable-texdoctk' '--with-x' *phase-helpers.sh, line 662: Called __helpers_die 'econf failed' * isolated-functions.sh, line 117: Called die * The specific snippet of code: * die "$@" * * If you need support, post the output of `emerge --info '=app-text/texlive-core-2014-r4::gentoo'`, * the complete build log and the output of `emerge -pqv '=app-text/texlive-core-2014-r4::gentoo'`. * The complete build log is located at '/var/log/portage/app-text:texlive-core-2014-r4:20150901-164906.log'. * For convenience, a symlink to the build log is located at '/var/tmp/portage/app-text/texlive-core-2014-r4/temp/build.log'. * The ebuild environment file is located at '/var/tmp/portage/app-text/texlive-core-2014-r4/temp/environment'. * Working directory: '/var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build' * S: '/var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build' What is it looking for? Thelma
[gentoo-user] texlive-core - poppler / xpdf missing library
I'm emerging texlive-core and it complains on missing libraries: checking requested system `cairo' library... ok checking requested system `poppler' library... failed checking requested system `xpdf' library... failed checking requested system `zziplib' library... ok configure: error: some requested system libraries failed !!! Please attach the following file when seeking support: !!! /var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build/config.log * ERROR: app-text/texlive-core-2014-r4::gentoo failed (configure phase): * econf failed * * Call stack: * ebuild.sh, line 93: Called src_configure * environment, line 2887: Called econf '-C' '--bindir=/usr/bin' '--datadir=/var/tmp/portage/app-text/texlive-core-2014-r4/work/texlive-core-2014_build' '--with-system-freetype2' '--with-system-zlib' '--with-system-libpng' '--with-system-xpdf' '--with-system-poppler' '--with-system-teckit' '--with-teckit-includes=/usr/include/teckit' '--with-system-kpathsea' '--with-kpathsea-includes=/usr/include' '--with-system-icu' '--with-system-ptexenc' '--with-system-harfbuzz' '--with-system-icu' '--with-system-graphite2' '--with-system-cairo' '--with-system-pixman' '--with-system-zziplib' '--with-system-libpaper' '--without-texinfo' '--disable-dialog' '--disable-multiplatform' '--enable-epsfwin' '--enable-mftalkwin' '--enable-regiswin' '--enable-tektronixwin' '--enable-unitermwin' '--with-ps=gs' '--disable-psutils' '--disable-t1utils' '--enable-ipc' '--disable-biber' '--disable-bibtex-x' '--disable-dvipng' '--disable-dvipsk' '--disable-chktex' '--disable-lcdf-typetools' '-! -disable-p dfopen' '--disable-ps2eps' '--disable-ps2pkm' '--disable-detex' '--disable-ttf2pk2' '--disable-tex4htk' '--disable-cjkutils' '--disable-xdvik' '--disable-xindy' '--enable-luatex' '--disable-dvi2tty' '--disable-dvisvgm' '--disable-vlna' '--enable-shared' '--disable-native-texlive-build' '--disable-largefile' '--disable-xetex' '--disable-ptex' '--disable-eptex' '--disable-uptex' '--disable-euptex' '--disable-mendexk' '--disable-makejvf' '--disable-texdoctk' '--with-x' *phase-helpers.sh, line 662: Called __helpers_die 'econf failed' * isolated-functions.sh, line 117: Called die * The specific snippet of code: * die "$@" * One or more packages are either masked or have missing dependencies: * * >=dev-tex/luatex-0.45 pulled in by: * (dev-texlive/texlive-latex-2012:0/0::gentoo, installed) * * >=dev-tex/luatex-0.70 pulled in by: * (dev-texlive/texlive-basic-2012:0/0::gentoo, installed) * * >=dev-tex/luatex-0.70 pulled in by: * (app-text/texlive-core-2012-r1:0/0::gentoo, installed) * * The resume list contains packages that are either masked or have * unsatisfied dependencies. Please restart/continue the operation * manually, or use --skipfirst to skip the first package in the list and * any other packages that may be masked or have missing dependencies. When I try to emerge luatex it complains they can not be installed together. emerge -1q luatex texlive-core [ebuild N] dev-tex/luatex-0.70.1-r2 [ebuild U ] app-text/texlive-core-2014-r4 [2012-r1] [blocks B ]
Re: [SOLVED] [gentoo-user] poppler-0.32.0 - error
On 09/05/2015 03:19 PM, Fernando Rodriguez wrote: [snip] >>> >>> I was right that rebuilding libtiff (not perl-cleaner) will get you past > that >>> ebuild, but my advice was the same you just received, go back to the *VERY >>> FIRST* post on the subject and fix the root of the problem. You will see > that >>> error again (or worse runtime errors) until you fix it. >>> >>> Hint: It was Alan that gave you the solution. You chose to fix it by > installing >>> an incompatible jpeg implementation. That needs to be undone. >> >> It seems to me Alan solution: >> emerge -avC libjpeg-turbo >> emerge -av1 media-libs/jpeg:0 media-libs/jpeg:62 >> >> It will come to hunt me. It allow me to keep going with upgrades as I >> couldn't find any better solution. >> >> Currently I have media-libs/jpeg installed in two slots: >> media-libs/jpeg-6b-r12:62 >> media-libs/jpeg-8d-r1:0 >> >> I can not get rid of "media-libs/jpeg-6b-r12" due to dependency >> net-misc/nxclient-3.5.0.7 (=media-libs/jpeg-6*) >> >> I need "nxclient" for now until I find better solution. >> >> According to: equery d media-libs/jpeg-8d-r1 >> * These packages depend on media-libs/jpeg-8d-r1: >> virtual/jpeg-0-r2 (>=media-libs/jpeg-8d-r1:0 >> >> Maybe I could uninstall jpeg-8d-r1 as only "virtual/jpeg-0-r2" depends >> on it. >> >> Thelma >> > > That was your own solution. You have a few ways to solve it. > > 1. Grab the last version of nxclient from the gentoo attic (or from > /var/db/pkg/net-misc/nxclient if it doesn't need any files to build) change > the > dependency to virtual/jpeg, put it on a local overlay and re-emerge it (after > replacing libjpeg with libjpeg-turbo again) > 2. Rebuild everything that depends on libjpeg on the right order. Something > like (I have not tested this command, but it may build stuff you don't have > installed, hence the --depclean, maybe somebody can give you a better one): > > # emerge --oneshot `equery depends virtual/jpeg` > # emerge --depclean --ask > > 3. This is a hack and I've never done it. In /var/db/pkg/net-misc/nxclient > update all media-libs/jpeg to the virtual/jpeg. Then unmerge all media- > libs/jpeg slots and emerge libjpeg turbo. This should work because anything > linked against jpeg *should* work with jpeg-turbo but not the other way > around. Good ideas, thank you. I'm trying to implement one of this ideas but I have a problem with making manifest. The nxclient-3.5.0.7.ebuild is not in "attic" but I have a local copy. Though, I can not "manifest" the ebuild it can not be found: nxclient-3.5.0-7.x86_64.tar.gz ebuild /usr/local/portage/net-misc/nxclient/nxclient-3.5.0.7.ebuild manifest Layman -L doesn't list it either Various places have it, like: https://baobabmaster.unige.ch/download/linux/ I downloaded and copy the file to: /usr/portage/distfiles but system still try to download the file when I try to make ebuild ... manifest" Thelma
Re: [gentoo-user] dec-terminal fonts
On 09/09/2015 03:04 PM, Harry Putnam wrote: > I've got to liking this font: > -dec-terminal-medium-r-normal--14-140-75-75-c-80-iso8859-1 > > But, after checking with xlsfonts... I don't see it available > > Can anyone tell me which font package would have -dec-termainal [...] > fonts? check: media-fonts/font-bitstream-75dpi Thelma
[gentoo-user] Gentoo net0 - auto resetting - very impressed
After recent upgrade, I've noticed the my network connection auto configure itself, depend which network I'm connected to. Very impressive. Which configuration/program is responsible for it? Lately I've installed Fedora core on my old eeepc and I very impressed with the printer installation. Fedora automatically recognized my Brother HL-5730 printer and installed printer driver for it. I wish Gentoo would be able to do it as well some day. -- Thelma
Re: [gentoo-user] Gentoo net0 - auto resetting - very impressed
On 09/13/2015 04:01 PM, Mick wrote: > On Sunday 13 Sep 2015 19:14:55 the...@sys-concept.com wrote: >> After recent upgrade, I've noticed the my network connection auto >> configure itself, depend which network I'm connected to. Very >> impressive. >> Which configuration/program is responsible for it? > > If you are running openrc, then I'm guessing that it would be the default > setting which starts dhcpcd. > > If you running ifplugd then it would be that daemon which starts dhcpcd when > a > link becomes live. > > >> Lately I've installed Fedora core on my old eeepc and I very impressed >> with the printer installation. Fedora automatically recognized my >> Brother HL-5730 printer and installed printer driver for it. >> >> I wish Gentoo would be able to do it as well some day. > > I seriously hope that my Gentoo does not install anything without asking me. > I don't mind being notified about a driver, or kernel component, but only > when > I take an action relevant to the particular component. Having things being > installed on *my* computer should be down to me to decide and down to me to > initiate. I didn't mean auto installation, even Fedora doesn't do that. When I go to add printer the program should be able to go to vendor web-page, find the printer driver and install it. Thelma
Re: [gentoo-user] Re: Gentoo net0 - auto resetting - very impressed
On 09/15/2015 01:58 PM, Alan McKinnon wrote: > On 15/09/2015 21:53, the...@sys-concept.com wrote: [snip] > >>> Yea, I almost had mine working but I just got tired of hacking >>> away at it. It would be more straightforward to take an rpm or deb >>> package and use it. Folks have made specific models work, but, it >>> is a bit of work. >>> >>> 'eix -R brother' shows quite a few overlays (ebuilds) that cover >>> a range of brother printers, should you desire to hack that route. >> >> >> To install brother printer just follow these steps from Gentoo forum: >> https://forums.gentoo.org/viewtopic-t-909052-highlight-brother.html > > > > Or just don't install Brother printers. They are utter crap and why > anyone gives them desk space is beyond me. It's not like they are > expensive either, toss 'em and buy something real. > > Recent Samsung, Epson and everything supported by hplip all work great. I had a different experience with Samsung printers. I bought one model and it had a big bold letters that it works with Linux. When I try to install printer driver, it was impossible. It came with some kind of script the relied on an old/obsolete library so it was impossible to install it. On Fedora, script installs brother printer base on Brother source web-page driver, it works perfectly. On Gentoo it is a manual/painful setup if you doing it the first time. Thelma
Re: [gentoo-user] Re: Gentoo net0 - auto resetting - very impressed
On 09/15/2015 01:47 PM, james wrote: > sys-concept.com> writes: > > > >> Lately I've installed Fedora core on my old eeepc and I very impressed >> with the printer installation. Fedora automatically recognized my >> Brother HL-5730 printer and installed printer driver for it. > > I have a brother J6710-DW printer that I have tried, unsuccessfully > in the past to set up on Gentoo. Brother is borked on Gentoo. Don't believe > me read the recent post from Patrick Lauer on planet.gentoo.org. Patrick > offer up a simplified way that he was able to get his brother printer > running via IPP and a postscript filter. > > >> I wish Gentoo would be able to do it as well some day. > > Yea, I almost had mine working but I just got tired of hacking > away at it. It would be more straightforward to take an rpm or deb > package and use it. Folks have made specific models work, but, it > is a bit of work. > > 'eix -R brother' shows quite a few overlays (ebuilds) that cover > a range of brother printers, should you desire to hack that route. To install brother printer just follow these steps from Gentoo forum: https://forums.gentoo.org/viewtopic-t-909052-highlight-brother.html Thelma
Re: [gentoo-user] portage can not find local ebuild
Thelma On 09/17/2015 09:30 PM, wraeth wrote: > On 18/09/15 13:15, the...@sys-concept.com wrote: >> My settings: > >> make.conf. ... PORTDRI_OVERLAY="/usr/local/portage" > > Did you mean PORTDIR_OVERLAY, or is there a typo in your make.conf? Hypo :-/ thanks. Thelma
[gentoo-user] portage can not find local ebuild
I'm trying to emerge one of my local ebuild and portage can not find it. What am I missing? emerge -avq nxclient emerge: there are no ebuilds to satisfy "nxclient". My settings: make.conf. ... PORTDRI_OVERLAY="/usr/local/portage" cat /etc/portage/repos.conf/gentoo.conf [DEFAULT] main-repo = gentoo [gentoo] location = /usr/portage sync-type = rsync sync-uri = rsync://192.168.139.7/gentoo-portage ll /usr/local/portage/net-misc/ total 16 drwxr-xr-x 3 portage portage 4096 May 22 13:05 nx drwxr-xr-x 2 rootroot4096 Sep 17 20:10 nxclient drwxr-xr-x 3 portage portage 4096 Oct 3 2014 nxserver-freeedition drwxr-xr-x 3 portage portage 4096 May 22 13:05 nxserver-freenx ll /usr/local/portage/net-misc/nxclient/ total 8 -rw-r--r-- 1 root root 774 Sep 17 20:10 Manifest -rw-r--r-- 1 root root 1989 Sep 17 20:08 nxclient-3.5.0.7.ebuild -- Thelma
Re: [gentoo-user] portage can not find local ebuild
On 09/17/2015 09:41 PM, the...@sys-concept.com wrote: > > > Thelma > > On 09/17/2015 09:30 PM, wraeth wrote: >> On 18/09/15 13:15, the...@sys-concept.com wrote: >>> My settings: >> >>> make.conf. ... PORTDRI_OVERLAY="/usr/local/portage" >> >> Did you mean PORTDIR_OVERLAY, or is there a typo in your make.conf? > > Hypo :-/ thanks. That suppose to be: Typo, I have to buy bigger monitor. Thelma
Re: [gentoo-user] Xfce Logout/Shutdown/Suspend
On 09/14/2015 11:36 AM, siefke_lis...@web.de wrote: > Hello, > > In Xfce all buttons are disabled until log off. > > I try https://forums.gentoo.org/viewtopic-p-7803094.html but it help > nothing. > > I not know where should search mistakes and what make me crazy i has it > on both laptops. > > siefke ~ $ ck-list-sessions > Session1: > unix-user = '1000' > realname = '(null)' > seat = 'Seat2' > session-type = '' > active = FALSE > x11-display = ':0.0' > x11-display-device = '/dev/tty7' > display-device = '' > remote-host-name = '' > is-local = FALSE > on-since = '2015-09-14T16:50:41.656831Z' > login-session-id = '2' > > siefke ~ $ upower -d > > Daemon: > daemon-version: 0.99.2 > on-battery: yes > lid-is-closed: no > lid-is-present: yes > critical-action: PowerOff > > Has someone a idea? > > Silvio > Check out this topic: http://forums.gentoo.org/viewtopic-p-6899870.html?sid=08f2d9ca38570655b8d1e4cc62a82681#6899870 Thelma
[gentoo-user] clean-up root partition
How do you folks clean-up root partition, I have too much junk in there. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda374G 61G 9.3G 87% / I've already removed all the files from: /usr/portage/distfiles -- Thelma
Re: [gentoo-user] clean-up root partition
On 10/01/2015 06:57 AM, Philip Webb wrote: > 151001 the...@sys-concept.com wrote: >> How do you folks clean-up root partition, I have too much junk in there. >> df -h >> Filesystem Size Used Avail Use% Mounted on >> /dev/sda374G 61G 9.3G 87% / >> I've already removed all the files from /usr/portage/distfiles . > > 'du' is your friend : it has lots of options, so read the 'man'. > that will tell you what's using so much space, then you can delete stuff. > My system shows : > > root:505 ~> df -h > Filesystem Size Used Avail Use% Mounted on > 802 30G 6.4G 24G 22% / > tmpfs 395M 516K 395M 1% /run > dev 10M 0 10M 0% /dev > none2.0G 0 2.0G 0% /dev/shm > cgroup_root 10M 0 10M 0% /sys/fs/cgroup > /dev/sda530G 12G 19G 40% /home > /dev/sda615G 6.7G 8.4G 45% /usr/portage > /dev/sda740G 8.1G 32G 21% /z > /dev/sdb1 9.8G 3.5G 6.3G 36% /usr/local > /dev/sdb5 9.8G 1.6G 8.3G 16% /usr/src > tmpfs 2.0G 8.0K 2.0G 1% /tmp > > /z is a large hangar space for handling very big files. Thanks. Yes, I used: du -a /var | sort -n -r | head -n 10 and found my /var/log/messages was over 5Gb -- Thelma
[gentoo-user] process takes about 85% of the CPU
when I run htop I see a process that takes about 85% of the CPU: Why is it taking so much CUP? /usr/bin/X -nolisten tcp -br -deferglyphs 16 vt07 -auth /var/run/slim.auth Yes, I use slim to login. -- Thelma
Re: [gentoo-user] Re: portage can not find local ebuild
On 09/18/2015 01:38 AM, Nikos Chantziaras wrote: [snip] > > Remove the PORTDIR_OVERLAY entry from make.conf. Then, create a new file > in /etc/portage/repos.conf/, for example "local.conf", with these contents: > > [Local] > priority = > location = /usr/local/portage > auto-sync = no > > The high value for priority is just to make sure that your local ebuilds > override any other ebuilds of the same name that exist elsewhere. Good suggestion, thanks. Thelma
[gentoo-user] terminal colors
I have a hard time reading text in terminal when editing *.tex files. My background is black but the dark blue/violet text it is very hard to see on a black background. Recently Gentoo changed those colors, how to restore them the colors so I can read the text on a black background. -- Thelma
Re: [gentoo-user] blocking facebook
On 12/11/2015 08:29 PM, Willie M wrote: > If that is the only website you want to block use /etc/hosts. Point it > towards your own computer. "127.0.0.1 facebook.com". That will work, but if they will use boot VirtualBox Windows it will by-pass that setting. -- Thelma > On Fri, Dec 11, 2015, 7:04 PM <the...@sys-concept.com> wrote: > >> Does anybody have an idea how to block facebook? >> >> I'm using dd-wrt. The "access restriction" can block http but not https >> and I'm not good in iptables :-/ >> In addition users are using VirtualBox on the network as well.
[gentoo-user] blocking facebook
Does anybody have an idea how to block facebook? I'm using dd-wrt. The "access restriction" can block http but not https and I'm not good in iptables :-/ In addition users are using VirtualBox on the network as well. -- Thelma
Re: [gentoo-user] blocking facebook
On 12/11/2015 09:05 PM, Simon Thelen wrote: > On 15-12-11 at 20:03, the...@sys-concept.com wrote: >> Does anybody have an idea how to block facebook? > The only way to blacklist facebook would be to create a whitelist and > drop everything not on said whitelist. > > If you block DNS, they can use a different DNS server. If you block IP > addresses they'll use a proxy/vpn. If you use deep packet inspection > they'll use TLS or a VPN or an SSH tunnel. > > If you can control the systems so that they don't do any of the above, > it's possible but you've admitted that you can't (unless you can > control all the Virtualbox instances). The users are not that knowledgeable to do any of that DNS, proxy/vpn etc. I know VirtualBox IP address and can block the page "facebook" for individual IP or certain range in dd-wrt. But my problem is getting the dd-wrt "access control" to recognize and block "https". Trying to block by URL: https://www.facebook.com/ doesn't work. -- Thelma
[gentoo-user] apache SSL error
I changed in apache: 00_default_ssl_vhost.conf SSLProtocol ALL -SSLv2 -SSLv3 SSLHonorCipherOrder on SSLCipherSuite EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:ECDHE-RSA-AES128-SHA:DHE-RSA-AES128-GCM-SHA256:AES256+EDH:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DH$ and now apache will not start. Error: Unable to configure permitted SSL ciphers error] SSL Library Error: 151441516 error:0906D06C:PEM routines:PEM_read_bio:no start line Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [error] SSL Library Error: 151441516 error:0906D06C:PEM routines:PEM_read_bio:no start line Bad file contents or format - or even just a forgotten SSLCertificateKeyFile? [error] SSL Library Error: 336486680 error:140E6118:SSL routines:SSL_CIPHER_PROCESS_RULESTR:invalid command I re-emerge dev-libs/openssl but it deosn't help. Which one I need to re-emerge? -- Thelma
Re: [gentoo-user] apache SSL error
On 01/05/2016 08:45 PM, the...@sys-concept.com wrote: > I changed in apache: 00_default_ssl_vhost.conf > > SSLProtocol ALL -SSLv2 -SSLv3 > SSLHonorCipherOrder on > SSLCipherSuite > EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:ECDHE-RSA-AES128-SHA:DHE-RSA-AES128-GCM-SHA256:AES256+EDH:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:DH$ > > and now apache will not start. Error: > Unable to configure permitted SSL ciphers > error] SSL Library Error: 151441516 error:0906D06C:PEM > routines:PEM_read_bio:no start line Bad file contents or format - or even > just a forgotten SSLCertificateKeyFile? > [error] SSL Library Error: 151441516 error:0906D06C:PEM > routines:PEM_read_bio:no start line Bad file contents or format - or even > just a forgotten SSLCertificateKeyFile? > [error] SSL Library Error: 336486680 error:140E6118:SSL > routines:SSL_CIPHER_PROCESS_RULESTR:invalid command > > > I re-emerge dev-libs/openssl > but it deosn't help. Which one I need to re-emerge? Fixed, I didn't copy correctly the "SSLCipherSuite..."
Re: [gentoo-user] Problem with openrc-0.18.4 and ifplugd
Thelma On 12/20/2015 11:26 AM, Mick wrote: > Two laptops will not bring up their wired/wireless interface(s) since the > upgrade to the latest stable openrc. Interfaces have to be started manually, > after which ifplugd starts on its own: > = > > /etc/init.d/net.enp11s0 start > * Bringing up interface enp11s0 > * Skipping module adsl due to missing program: /usr/sbin/adsl-start > /usr/sbin/pppoe-start > * Skipping module br2684ctl due to missing program: br2684ctl > * Skipping module bridge due to missing program: brctl > * Skipping module clip due to missing program: /usr/sbin/atmsigd > * Skipping module netplugd due to missing program: /sbin/netplugd > * Skipping module ipppd due to missing program: /usr/sbin/ipppd > * Skipping module firewalld due to missing program: firewall-cmd > * Skipping module dhclient due to missing program: /sbin/dhclient > * Skipping module pump due to missing program: /sbin/pump > * Loaded modules: apipa arping bonding tuntap ccwgroup ethtool macvlan > macchanger macnet ifplugd wpa_supplicant ssidnet iproute2 pppd system vlan > dhcpcd ip6rd ip6to4 > * Configuring enp11s0 for MAC address 00:26:B9:20:B4:9C ... [ > ok ] > * Starting ifplugd on enp11s0 ... > * start-stop-daemon: fopen `/var/run/ifplugd.enp11s0.pid': No such file or > directory > * Detaching to start `/usr/sbin/ifplugd' ... [ > ok ] > * Backgrounding ... > * WARNING: net.enp11s0 has started, but is inactive > > > > In addition /var/log/rc.log is empty - no messages are captured, > > Finally, there are a lot of messages like this in the console at boot time: > > * start-stop-daemon: fopen 'var/run/dbus.pid' : No such file or directory > * Detaching to start '/usr/bin/dbus-daemon ...' > * runscript is deprecated; please use openrc-run instead. > > How do I put this right? I think your error is related to my thread below. Just get rid of line form fstab: none /proc proc defaults 0 0 and any other not related ones. Thelma
Re: [gentoo-user] no network "eth0" after upgrade.
On 12/19/2015 12:10 PM, the...@sys-concept.com wrote: > I just upgraded one of my systems and upon boot there is no network: > > /etc/init.d/net.eth0 start > * Mounting local filesystems ... > mount: mount point /proc/bus/usb does not exist > * Some local filesystem failed to start > ERROR: localmount failed to start > ERROR: cannot start net.eth0 as localmount would not start > > rc-status sysinit > sysfs [ started ] > dmesg [ started ] > devfs [ started ] > tmpfiles.dev [ started ] > udev [ started > > > I can not even ssh to the system as network is not working. > What to check next? > It seems I'm not the only one: https://forums.gentoo.org/viewtopic-t-1034770-highlight-localmount.html "The problem was openrc-0.18.4. When I downgraded to openrc-0.16.4 the problem went away." Now, I can not downgrade without eth0 working. Do I need to boot strap and downgrade or is there is easier solution? -- Thelma
Re: [gentoo-user] no network "eth0" after upgrade.
On 12/19/2015 02:04 PM, John Runyon wrote: > Not proc, but you should add nofail to scanner. > > John Runyon > Sent from my phone > > On Dec 19, 2015 2:59 PM, the...@sys-concept.com wrote: >> >> On 12/19/2015 12:57 PM, Alexander Kapshuk wrote: >> [snip] >> >>>>> >>>> It seems I'm not the only one: >>>> https://forums.gentoo.org/viewtopic-t-1034770-highlight-localmount.html >>>> >>>> "The problem was openrc-0.18.4. When I downgraded to openrc-0.16.4 the >>>> problem went away." >>>> >>>> Now, I can not downgrade without eth0 working. >>>> Do I need to boot strap and downgrade or is there is easier solution? >>>> >>>> -- >>>> Thelma >>>> >>>> >>>> >>> Here is a news item that explains the situation. >>> >>> 2015-10-07-openrc-0-18-localmount-and-netmount-changes >>>Title OpenRC-0.18 localmount and netmount changes >>>AuthorWilliam Hubbs <willi...@gentoo.org> >>>Posted2015-10-07 >>>Revision 1 >>> >>> The behaviour of localmount and netmount is changing on Linux systems. >>> In the past, these services always started successfully. However, now they >>> will fail if a file system they attempt to mount cannot be mounted. >>> >>> If you have file systems listed in fstab which should not be mounted at >>> boot time, make sure to add noauto to the mount options. If you have >>> file systems that you want to attempt to mount at boot time but failure >>> should be allowed, add nofail to the mount options for these file >>> systems in fstab. >>> >> >> This is my fstab: >> /dev/hda1 /boot ext2 noauto,noatime 1 1 >> /dev/hda3 / ext3 noatime 0 1 >> /dev/hda2 none swap sw 0 0 >> /dev/hda4 /home ext3 noatime 0 1 >> >> /dev/hdd /mnt/cdrom auto noauto,ro,users 0 0 >> /dev/hdd/mnt/dvdr auto noauto,users >> 0 0 >> >> # Scanner >> none /proc/bus/usb usbfs defaults,devmode=0666 0 0 >> >> none /proc proc defaults 0 0 >> >> Does it mean I should add: "nofail" to Scanner and "/proc" line? OK, I've added "nofail" to Scanner, and still no network after boot. -- Thelma
Re: [gentoo-user] no network "eth0" after upgrade.
On 12/19/2015 01:13 PM, Alan Mackenzie wrote: > Hello, Thelma. > > On Sat, Dec 19, 2015 at 12:10:58PM -0700, the...@sys-concept.com wrote: >> I just upgraded one of my systems and upon boot there is no network: > >> /etc/init.d/net.eth0 start >> * Mounting local filesystems ... >> mount: mount point /proc/bus/usb does not exist >> * Some local filesystem failed to start >> ERROR: localmount failed to start >> ERROR: cannot start net.eth0 as localmount would not start > >> rc-status sysinit >> sysfs [ started ] >> dmesg [ started ] >> devfs [ started ] >> tmpfiles.dev [ started ] >> udev [ started > > >> I can not even ssh to the system as network is not working. >> What to check next? > > Have you got CONFIG_FHANDLE set in your kernel config? This almost > tripped me up when I synched a day or two ago. The new udev ebuild > output a message saying this was needed. It wasn't wrong, either. > > CONFIG_FHANDLE can be found in General Setup, under the prompt "open by > fhandle syscalls". I had CONFIG_FHANDLE=y in kernel .config -- Thelma
[gentoo-user] no network "eth0" after upgrade.
I just upgraded one of my systems and upon boot there is no network: /etc/init.d/net.eth0 start * Mounting local filesystems ... mount: mount point /proc/bus/usb does not exist * Some local filesystem failed to start ERROR: localmount failed to start ERROR: cannot start net.eth0 as localmount would not start rc-status sysinit sysfs [ started ] dmesg [ started ] devfs [ started ] tmpfiles.dev [ started ] udev [ started I can not even ssh to the system as network is not working. What to check next? -- Thelma
Re: [gentoo-user] no network "eth0" after upgrade.
On 12/19/2015 12:57 PM, Alexander Kapshuk wrote: [snip] >>> >> It seems I'm not the only one: >> https://forums.gentoo.org/viewtopic-t-1034770-highlight-localmount.html >> >> "The problem was openrc-0.18.4. When I downgraded to openrc-0.16.4 the >> problem went away." >> >> Now, I can not downgrade without eth0 working. >> Do I need to boot strap and downgrade or is there is easier solution? >> >> -- >> Thelma >> >> >> > Here is a news item that explains the situation. > > 2015-10-07-openrc-0-18-localmount-and-netmount-changes > Title OpenRC-0.18 localmount and netmount changes > AuthorWilliam Hubbs <willi...@gentoo.org> > Posted2015-10-07 > Revision 1 > > The behaviour of localmount and netmount is changing on Linux systems. > In the past, these services always started successfully. However, now they > will fail if a file system they attempt to mount cannot be mounted. > > If you have file systems listed in fstab which should not be mounted at > boot time, make sure to add noauto to the mount options. If you have > file systems that you want to attempt to mount at boot time but failure > should be allowed, add nofail to the mount options for these file > systems in fstab. > This is my fstab: /dev/hda1 /boot ext2noauto,noatime 1 1 /dev/hda3 / ext3noatime 0 1 /dev/hda2 noneswapsw 0 0 /dev/hda4 /home ext3noatime 0 1 /dev/hdd/mnt/cdrom autonoauto,ro,users 0 0 /dev/hdd/mnt/dvdr auto noauto,users0 0 # Scanner none /proc/bus/usb usbfs defaults,devmode=0666 0 0 none/proc procdefaults 0 0 Does it mean I should add: "nofail" to Scanner and "/proc" line? -- Thelma
Re: [gentoo-user] [SOLVED] no network "eth0" after upgrade.
On 12/19/2015 05:56 PM, Neil Bothwick wrote: > On Sat, 19 Dec 2015 19:02:54 -0500, Philip Webb wrote: > >>>> none /proc/bus/usb usbfs defaults,devmode=0666 0 0 >>>> none /proc proc >>>> defaults 0 0 >>> You're trying to mount /proc/bus/usb before mounting /proc. >>> Systemd takes care of such things, >>>> but with Openrc local mounts are mounted in the order they appear in >>>> fstab. Try switching the lines. >> >> That looks like the explanation to me : has Thelma tried this ? > > Looking at it again, I don't think either of those entries should be in > fstab, certainly not the /proc one. Good hint, thank you. I've removed both lines from fstab: # Scanner none /proc/bus/usb usbfs defaults,devmode=0666 0 0 none /proc proc defaults 0 0 and the system booted normally with openrc-0.18.4 Question, why isn't the line: none /proc proc defaults 0 0 needed anymore? All my other systems have this line in fstab. -- Thelma
Re: [gentoo-user] [SOLVED] no network "eth0" after upgrade.
On 12/19/2015 09:19 PM, Philip Webb wrote: > 151219 the...@sys-concept.com wrote: >> On 12/19/2015 05:56 PM, Neil Bothwick wrote: >>> On Sat, 19 Dec 2015 19:02:54 -0500, Philip Webb wrote: > Thelma> none /proc/bus/usb usbfs defaults,devmode=0666 0 0 >> none /proc proc >> defaults 0 0 > Neil> You're trying to mount /proc/bus/usb before mounting /proc. >> Systemd takes care of such things, >> but with Openrc local mounts are mounted in the order they appear in >> fstab. Try switching the lines. > Philip> That looks like the explanation to me : has Thelma tried this ? > Neil> Looking at it again, I don't think either of those entries >> should be in fstab, certainly not the /proc one. > Thelma> Good hint, thank you. I've removed both lines from fstab: >> and the system booted normally with openrc-0.18.4 >> Question, why isn't 'none /proc proc defaults 0 0' needed anymore ? >> All my other systems have this line in fstab. > > My own Fstab has long had these lines : > > # NB The next line is critical for boot! > none /proc proc defaults 0 0 > > When did this change & why ? Does anyone know ? I would like to know that too! Indeed I had same comments on some of my other systems, but it seems to me this line is no longer needed. I'm compiling two other backup system and commented these line out from fstab, let see what happens. -- Thelma
[gentoo-user] set FEATURES="-xattr" in make.conf
I'm upgrading one of my boxes (last one) and get an error message on the following packages. grub-0.97-r16 python-2.7.10-r1 icedtea-bin-7.2.6.3 firefox-bin-38.4.0 virtualbox-bin-4.3.32.103443 * Files will be installed there for grub to function correctly. !!! Failed to copy extended attributes. In order to avoid this error, !!! set FEATURES="-xattr" in make.conf. Why is it asking for it? None of my other boxes have setting: FEATURES="-xattr -- Thelma
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 01:33 PM, Heiko Baums wrote: > Am 26.11.2015 um 21:14 schrieb the...@sys-concept.com: > >> I see. OK >> clinic-amd ssh # modprobe vboxpci >> clinic-amd ssh # lsmod | grep vboxpci >> vboxpci11672 0 >> vboxdrv 287977 4 vboxnetadp,vboxnetflt,vboxpci >> >> Do I need to log OUT/IN as user? >> Restarting the VirtualBox did not help. > > Maybe you should check the file permissions of your printer device, and > add your user to the appropriate group. Or just try adding your user to > the group lp. In my backup system, where VirtualBox recognizes USB devices. user is not "lp" group and everything works. Besides there would be other entries in USB, and there are none. -- Thelma
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 01:05 PM, Heiko Baums wrote: > Am 26.11.2015 um 21:00 schrieb the...@sys-concept.com: > >> There is no need to add this module, it is already loaded: >> >> find /lib/modules/`uname -r` -name '*.ko' >> /lib/modules/3.10.7-gentoo-r1/kernel/drivers/hwmon/it87.ko >> /lib/modules/3.10.7-gentoo-r1/kernel/drivers/hwmon/hwmon-vid.ko >> /lib/modules/3.10.7-gentoo-r1/kernel/drivers/char/kcopy/kcopy.ko >> /lib/modules/3.10.7-gentoo-r1/kernel/drivers/i2c/algos/i2c-algo-pca.ko >> /lib/modules/3.10.7-gentoo-r1/kernel/arch/x86/kernel/test_nx.ko >> /lib/modules/3.10.7-gentoo-r1/misc/vboxnetadp.ko >> /lib/modules/3.10.7-gentoo-r1/misc/vboxdrv.ko >> /lib/modules/3.10.7-gentoo-r1/misc/vboxnetflt.ko >> /lib/modules/3.10.7-gentoo-r1/misc/vboxpci.ko > > Those are the modules which are installed for your kernel. That doesn't > say if they are loaded. I see. OK clinic-amd ssh # modprobe vboxpci clinic-amd ssh # lsmod | grep vboxpci vboxpci11672 0 vboxdrv 287977 4 vboxnetadp,vboxnetflt,vboxpci Do I need to log OUT/IN as user? Restarting the VirtualBox did not help. Thelma
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 01:33 PM, Heiko Baums wrote: > Am 26.11.2015 um 21:14 schrieb the...@sys-concept.com: > >> I see. OK >> clinic-amd ssh # modprobe vboxpci >> clinic-amd ssh # lsmod | grep vboxpci >> vboxpci11672 0 >> vboxdrv 287977 4 vboxnetadp,vboxnetflt,vboxpci >> >> Do I need to log OUT/IN as user? >> Restarting the VirtualBox did not help. > > Maybe you should check the file permissions of your printer device, and > add your user to the appropriate group. Or just try adding your user to > the group lp. Which file is it? running lsusb as users show the printer is recognized: Brother Industries $ lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 04c5:11a2 Fujitsu, Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 014: ID 04f9:2028 Brother Industries, Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- Thelma
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 01:33 PM, Heiko Baums wrote: > Am 26.11.2015 um 21:14 schrieb the...@sys-concept.com: > >> I see. OK >> clinic-amd ssh # modprobe vboxpci >> clinic-amd ssh # lsmod | grep vboxpci >> vboxpci11672 0 >> vboxdrv 287977 4 vboxnetadp,vboxnetflt,vboxpci >> >> Do I need to log OUT/IN as user? >> Restarting the VirtualBox did not help. > > Maybe you should check the file permissions of your printer device, and > add your user to the appropriate group. Or just try adding your user to > the group lp. > When I run: $ VBoxManage list usbhost Host USB Devices: There are no entries. On my backup box it shows: VBoxManage list usbhost Host USB Devices: UUID: a441949f-caeb-457d-a81b-4b195ff15100 VendorId: 0x051d (051D) ProductId: 0x0003 (0003) Revision: 1.6 (0106) Port: 0 USB version/speed: 2/1 Manufacturer: American Power Conversion Product:Smart-UPS 1000 FW:COM 02.1 / UPS.05.D SerialNumber: AS1117120054 Address: sysfs:/sys/devices/pci:00/:00:1d.0/usb2/2-1//device:/dev/vboxusb/002/002 Current State: Busy
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 03:05 PM, Heiko Baums wrote: > Am 26.11.2015 um 21:44 schrieb the...@sys-concept.com: > >> Which file is it? >> >> running lsusb as users show the printer is recognized: >> Brother Industries >> >> $ lsusb >> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 001 Device 002: ID 04c5:11a2 Fujitsu, Ltd >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 003 Device 014: ID 04f9:2028 Brother Industries, Ltd >> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > It's the file /dev/bus/usb/003/014 if the entry with Brother Industries, > Ltd is your printer. lsusb ... Bus 003 Device 016: ID 04f9:2028 Brother Industries, Ltd ll /dev/bus/usb/003/016 crw-rw-r-- 1 root lp 189, 271 Nov 26 16:09 /dev/bus/usb/003/016 Everybody can read the file so VirtualBox should be able to detect it. -- Thelma
Re: [gentoo-user] [SOLVED] Virtualbox not displaying USB devices
On 11/26/2015 12:57 PM, Heiko Baums wrote: > Am 26.11.2015 um 20:55 schrieb the...@sys-concept.com: > >> I'll try adding to /etc/conf.d/modules >> modules="vboxdrv vboxnetflt vboxnetadp vboxpci" >> >> But how to load the module without restarting the box? > > Run as root: > modprobe vboxpci > > To check if it's already loaded run: > lsmod | grep vboxpci The problem fixed itself. But I'm not sure what fix it. Maybe "modprobe vboxpci" or re-adding "user" to vboxusers group. I just log-out / log-in and the USB printer was recognized by VirtualBox. Thank you all for your suggestions. -- Thelma.
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect [continued]
On 11/25/2015 12:31 PM, Neil Bothwick wrote: > On Wed, 25 Nov 2015 11:58:47 -0700, the...@sys-concept.com wrote: > >> I had the same problem. >> openssh-7.xxx (screwed up) by disabling ssh-dss key (that is what >> nxserver is using). > > That's not what the error message you posted said. > >> Trying to enable the "ssh-dss" via sshd_config does not work! > > Which you would expect if that was not the problem. From memory, I think > your problem was caused by password logins as root being disabled. That > was another change for 7.0 and my only comment on that is "why the hell > did they wait until version 7.0 before getting rid of such and insecure > default?". > > in sshd_config #PermitRootLogin yes or #PermitRootLogin no I can connect using openssh-6 but not 7-xx Thelma
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect [continued]
On 11/25/2015 01:04 PM, Neil Bothwick wrote: > On Wed, 25 Nov 2015 12:55:43 -0700, the...@sys-concept.com wrote: > >>> Which you would expect if that was not the problem. From memory, I >>> think your problem was caused by password logins as root being >>> disabled. That was another change for 7.0 and my only comment on that >>> is "why the hell did they wait until version 7.0 before getting rid >>> of such and insecure default?". >>> >>> >> in sshd_config >> >> #PermitRootLogin yes >> or >> #PermitRootLogin no >> >> I can connect using openssh-6 but not 7-xx > > Because the setting is commented out so it falls back to the default, > which is yes in 6 and no in 7. Set it to what you need instead of relying > on defaults which can change. Yes, nxserver works with openssh-7; I don't know why I couldn't make it to work during upgrade few weeks ago :-/
Re: [gentoo-user] openssh-7.1_p1-r2 won't allow "nxserver" to connect [continued]
On 11/25/2015 11:50 AM, Bill Damage wrote: > I have exactly the same problem mentioned in this thread. I think something > changed and broke the authentication during an update. i found this message > by Googling and just joined the mail list to ask for help. I have done > everything mentioned in the thread, and here's where I'm at: (it worked fine > before some regular update broke it) > Thanks! > [root@tiger ssh]# nxsetup --test > > Testing your nxserver configuration ...Warning: Invalid value > "APPLICATION_LIBRARY_PRELOAD=/usr/lib64/nx/libX11.so.6:/usr/lib64/nx/libXext.so.6:/usr/lib64/nx/libXcomp.so.3:/usr/lib64/nx/libXcompext.so.3:/usr/lib64/nx/libXrender.so.1". > /usr/lib64/nx/libX11.so.6 could not be found. Users will not be able to run > a single application in non-rootless mode.Warning: Invalid value > "COMMAND_START_CDE=cdwm" Users will not be able to request a CDE > session.Warning: Invalid value "COMMAND_SMBMOUNT=smbmount". You'll not be > able to use SAMBA.Warning: Invalid value "COMMAND_SMBUMOUNT=smbumount". > You'll not be able to use SAMBA.Warning: Invalid cupsd version of > "/usr/sbin/cupsd". Need version 1.2. Users will not be able to enable > printing. Ignore if you use cups > 1.2Error: Could not find 1.5.0 or 2.[01].0 > or 3.[012345].0 version string in nxagent. NX 1.5.0 or 2.[01].0 or > 3.[012345].0 backend is needed for this version of FreeNX. > Warnings occured during config check. To enable these features please > correct the configuration file. > < done > > Testing your nxserver connection ...Permission denied > (publickey,gssapi-keyex,gssapi-with-mic,password).Fatal error: Could not > connect to NX Server. > Please check your ssh setup: > The following are _examples_ of what you might need to check. > - Make sure "nx" is one of the AllowUsers in sshd_config.(or that > the line is outcommented/not there)- Make sure "nx" is one of the > AllowGroups in sshd_config.(or that the line is outcommented/not there) > - Make sure your sshd allows public key authentication.- Make > sure your sshd is really running on port 22.- Make sure your > sshd_config AuthorizedKeysFile in sshd_config is set to authorized_keys. > (this should be a filename not a pathname+filename) - Make sure you allow > ssh on localhost, this could come from somerestriction of: -the tcp > wrapper. Then add in /etc/hosts.allow: ALL:localhost -the iptables. add > to it: $ iptables -A INPUT -i lo -j ACCEPT $ iptables -A > OUTPUT -o lo -j ACCEPT[root@tiger ssh]# > I had the same problem. openssh-7.xxx (screwed up) by disabling ssh-dss key (that is what nxserver is using). Trying to enable the "ssh-dss" via sshd_config does not work! So the only way to go about it is to downgrade to openssh-6.xxx -- Thelma
[gentoo-user] wireless USB mouse via PS/2 adapter and KVM switch
I have a KVM witch IOGEAR that using old type PS/2 ports I've tried to connect to it Wireless USB Mouse via USB-to-PS/2 adapter. It doesn't work :-/ -- Thelma
[gentoo-user] Virtualbox not displaying USB devices
I'm running Windows-7 in Virtualbox, everything worked OK yesterday but today Virtualbox does not see any USB devices. I have a USB label printer and it is recognized by Gentoo host: [ 6455.295503] usb 3-1: New USB device found, idVendor=04f9, idProduct=2028 [ 6455.295505] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6455.295508] usb 3-1: Product: QL-570 [ 6455.295509] usb 3-1: Manufacturer: Brother [ 6455.295511] usb 3-1: SerialNumber: G2Z917467 [ 6455.295612] usb 3-1: usb_probe_device [ 6455.295615] usb 3-1: configuration #1 chosen from 1 choice [ 6455.297499] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 6455.297541] usblp 3-1:1.0: usb_probe_interface [ 6455.297544] usblp 3-1:1.0: usb_probe_interface - got id Setting in Virtualbox: "USB 2.0 (EHCI) Controller" is Enabled. I'm in "vboxusers" group. fd@clinic-amd ~ $ groups wheel uucp audio cdrom cdrw usb users scanner fd plugdev vboxusers What else should I checked for? Recently I just upgraded to "openssh-7" but that should have nothing to do with Virtualbox and USB. I connected the QL-570 (USB printer) to my backup machine and VirtualBox recognize it OK -- Thelma
Re: [gentoo-user] Virtualbox not displaying USB devices
On 11/26/2015 11:33 AM, J. Roeleveld wrote: > On 26 November 2015 19:23:00 CET, the...@sys-concept.com wrote: >> >> I'm running Windows-7 in Virtualbox, everything worked OK yesterday but >> today Virtualbox does not see any USB devices. >> I have a USB label printer and it is recognized by Gentoo host: >> >> [ 6455.295503] usb 3-1: New USB device found, idVendor=04f9, >> idProduct=2028 >> [ 6455.295505] usb 3-1: New USB device strings: Mfr=1, Product=2, >> SerialNumber=3 >> [ 6455.295508] usb 3-1: Product: QL-570 >> [ 6455.295509] usb 3-1: Manufacturer: Brother >> [ 6455.295511] usb 3-1: SerialNumber: G2Z917467 >> [ 6455.295612] usb 3-1: usb_probe_device >> [ 6455.295615] usb 3-1: configuration #1 chosen from 1 choice >> [ 6455.297499] usb 3-1: adding 3-1:1.0 (config #1, interface 0) >> [ 6455.297541] usblp 3-1:1.0: usb_probe_interface >> [ 6455.297544] usblp 3-1:1.0: usb_probe_interface - got id >> >> Setting in Virtualbox: "USB 2.0 (EHCI) Controller" is Enabled. >> >> I'm in "vboxusers" group. >> >> fd@clinic-amd ~ $ groups >> wheel uucp audio cdrom cdrw usb users scanner fd plugdev vboxusers >> >> What else should I checked for? >> >> Recently I just upgraded to "openssh-7" but that should have nothing to >> do with Virtualbox and USB. >> I connected the QL-570 (USB printer) to my backup machine and >> VirtualBox recognize it OK > > You need to specifically assign the usb device to the guest. > > -- > Joost How do you do that? Thelma