ns whatsoever is strictly prohibited. Unauthorized
> export or re-export is prohibited. If you have received this e-mail in error,
> please advise the sender immediately and delete this e-mail and all attached
> documents from your computer system."
> #
> __
uilding, 6708 PB Wageningen, The Netherlands
> Phone: +31617876970 (Netherlands) +491627351075 (Germany)
> Mail: kastner.k...@gmail.com
> _______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Pr
the mesh i wanted to generate
> using GMSH.
>
> --
> Thanks and Regards
> ANUSHA
> Department of Computer Science & Electrical
> Fachhochschule,
> Kiel,Germany.
>
> ___
> gmsh mailing list
> gmsh@onelab
= {1,2,3,4,5,6,7,8};
> Best Regards,
>
> Josefin
>
> On 02/03/2016 06:02 PM, Christophe Geuzaine wrote:
>>> On 02 Feb 2016, at 20:59, Josefin Ahlkrona <josefin.ahlkr...@it.uu.se>
>>> wrote:
>>>
>>> Hi,
>>>
>>> I have
addressed. If you are
> not the intended recipient, please be advised that any use, distribution, or
> copying of the message is strictly prohibited and may be subject to
> penalties, If you received this transmission in error, please contact the
> sender immediately and delete t
sical Surface(31) = {26}; //x=x0
> Physical Surface(32) = {5};//top
> Physical Surface(33) = {27}; //bottom
>
> Physical Volume(34) = {1};
>
> Best,
>
> Josefin
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> ht
0 , 1 )
> Debug : t2 : (1 , 0 , 0 )
> Debug : pt : (0 , 120.65 , 0 )
> Debug : Gmsh model (GModel) imported:
> Debug : 24 Vertices
> Debug : 28 Edges
> Debug : 10 Faces
> Debug : 1 Regions
> Info: Done reading
> 'C:\Programs\woodemc\lap_water
removed in 2.12
> Thanks,
> csv
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.u
lo establecido en el artículo 14, inciso 3 de la Ley
> 25.326. La DIRECCIÓN NACIONAL DE PROTECCIÓN DE DATOS PERSONALES, Organo de
> Control de la Ley 25.326, tiene la atribución de atender las denuncias y
> reclamos que se interpongan con relación al incumplimiento de las normas
> sobre la
GMT+02:00 Ruth Vazquez Sabariego
> <ruth.sabari...@esat.kuleuven.be>:
> Hope the attached patched version of your file, does what you want.
> There was a small problem with the surface loops.
>
> Regards,
> Ruth
>
>
>
>
>
>
bus
> _______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Tetrahedr
mmon/CommandLine.cpp:41:0:
>> /usr/include/med.h:22:18: fatal error: hdf5.h: Datei oder Verzeichnis nicht
>> gefunden
>> #include
>> ^
>> compilation terminated.
>>
>>
>> BUT
>>
>> $ locate hdf5.h
>> /usr/include/hdf
orrect that so the point of view does not change
> after the Rotation center > Select?
>
> jean pierre aubry
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Tetrahedron V, July 4-5 2016: http://tet
h@onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
>>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Lieg
ion ?!?)
>
You can use:
Mesh.ElementOrder = 2;
Mesh.HighOrderOptimize = 1;
> bernd
>
>
> Zitat von Christophe Geuzaine <cgeuza...@ulg.ac.be>:
>
>>
>>> On 30 Mar 2016, at 07:30, Bernd Hahnebach <g...@b75.ch> wrote:
>>>
>>> Thank
>>
>>
>>
>> ___
>> gmsh mailing list
>> gmsh@onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
>>
>
>
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.in
_______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Te
g that's in
the mesh is put in the OpenGL vertex arrays... even if it's not visible.
> Regards,
> Ruben Vestergaard
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Ge
eady for parallel processing yet?
> Sorry for my bad English and thank you.
> Best regards, Andrew Demchenko.
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
Univ
>
>> ___
>> gmsh mailing list
>> gmsh@onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.inf
t;>
>>> Dear gmsh folks,
>>>
>>> attache a coarse hexa first order mesh. I'd like to get an second orde
>>> hexa mesh out of this. I found the hight order tools can be used to
>>> create the appropriate nodes for a second order hexa mesh. But how do I
>>> create elements ou
s, see
>
> https://github.com/mkraska/CalculiX-Examples/tree/master/CAD/OnshapeTutorial
>
> What can I do to properly create a compound surface?
>
> Best regards, Martin Kraska
>
> _______
> gmsh mailing list
> gmsh@onelab.info
. Abell M., PhD
> Ingeniero Civil
> Profesor Investigador
> Facultad de Ingeniería y Ciencias Aplicadas
> Universidad de los Andes
> (+56)2-2412-9321
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/list
vydden/spack/opt/spack/darwin-elcapitan-x86_64/clang-7.3.0-apple/petsc-3.6.4-24g5zsrebs3qba5uqt6l25chhnvwa5j7
> -- Using PETSc arch:
> -- Found PETSc
> -- Looking for vsnprintf
> -- Looking for vsnprintf - found
> -- Looking for sys/socket.h
> -- Looking for sys/socket.h - found
> --
be truly interactive from
> the command line? (or in this case, its pipe)
>
> And Christophe, since you're obviously deep into these types of software, do
> you have any suggestions?
>
> -Todd .
>
> On Fri, Feb 3, 2017 at 6:49 AM, Christophe Geuzaine <cgeuza...
> If I get them to talk, how do I test them?
>
> Yes, I'm clueless, but I won't get any smarter if I don't pursue this stuff,
> so help is genuinely appreciated.
>
> -Todd
>
>
> ___
> gmsh mailing list
> gms
msh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
re another way to create a RegionCompound?
>
> greetings
> Florian Bruckner
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electri
> -2` since that will perform the meshing twice...
>
Just run "gmsh file.geo -" (without "2")
> Thanks,
> Jeremy
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
Univer
asse 9, CH-8045 Zürich, benedikt.oswald@lspr.swiss - www.lspr.swiss
> --
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.mo
to define physical groups you need
first to "synchronise the model", using "SyncModel;"
- Not all existing primitives from the native Gmsh modeler have been ported yet
to OpenCASCADE
- The GUI cannot yet be used to create the entities interactively
Christophe
--
Prof. Christoph
cumented but you can actually specify the plane by its normal
vector explicitly as follows: Circle(num) = {p1,p2,p3} Plane {nx,ny,nz};)
Christophe
> Jim
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/ma
; l9 = newl;
> Line(l9) = {p9, p10};
> l10 = newl;
> Line(l10) = {p10, p1};
> ll1 = newll;
> Line Loop(ll1) = {l1,l2,l3,l4,l5,l6,l7,l8,l9,l10};
> surf1 = news;
> Plane Surface(surf1) = {ll1};
> ex1[] = Extrude{{0,0,0}, {1,0,0}, {0,0,0}, Pi}{Surface{surf1};};
> ___
utes each). Which version of Gmsh do you use?
> kind regards
>
> Andrew tsiantis
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical
tration.
> Yours
> Pierre Lemerle.
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free
e[1];
> surfSlave = Volume_extrude[0];
>
> boundMaster[] = Boundary{Surface{surfMaster};};
> boundSlave[] = Boundary{Surface{surfSlave};};
> Periodic Surface surfSlave { boundSlave[] } = surfMaster { boundMaster[] };
>
--
Prof. Christophe Geuzaine
University of Liege, Electri
- first engineer - LSPR AG - phone +41 43 366
> 90 74
> Grubenstrasse 9, CH-8045 Zürich, benedikt.oswald@lspr.swiss
> --
>
>
> _____
___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://one
ike it. I hope this problem can be resolved soon. Thanks a lot for your help.
>
> Jun
>
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
Unive
> Kate
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.m
___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://
src/xcb_io.c:529: _XAllocID: Assertion `ret != inval_id' failed.
> Abandon (core dumped)
>
>
> Could someone help me with this, please ?
>
> Many Thanks,
> Regards,
>
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info
; > more than ten minutes to remove 1600 duplicates.
> > I have to create thousands of these meshes so a speedup would be welcomed.
> >
>
> That seems a bit slow: on my laptop meshing and duplicate removal take about
> the same time (2 minutes each). Which version of
dancy | 50 Anand Park | Aundh | Pune | 411007 | India
> Ph: +91 20 40098381/82 | M: +91-9923406816 | www.cctech.co.in
> CCTech – "Transforming human life by democratization of technology"
>
>
> ___
> gmsh mailing list
> g
d less than a
> minute to remove the duplicates. Gmsh needs a few minutes for the mesh and
> 2+hrs for the removal so the procedure through Salome is way faster.
>
> Salome is written in python which is no faster than C++ so I guess the
> coherence routine in gmsh could take a refine
_______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://g
xplicit sync step is indeed a bit
annoying - the SVN version now does it automatically.
Christophe
> Regards,
>
> Alessandro
>
>
> -Messaggio originale-
> Da: Christophe Geuzaine [mailto:cgeuza...@ulg.ac.be]
> Inviato: giovedì 13 ottobre 2016 21.58
> A: Aless
Cheers, and thanks a lot,
> Gregor Mitscha-Baude
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and
> On 2 Nov 2016, at 09:24, Florian Blachère <florian.blach...@univ-nantes.fr>
> wrote:
>
> On 30/10/16 09:49, Christophe Geuzaine wrote:
>> New in 2.14.1: fixed regression in periodic meshes; small bug fixes and code
>> cleanups.
>>
>> Downlo
. You should use the tarball currently available on
the server as the reference, as the original one was lost.
> Thanks,
>
> Joseph
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
ols->Plugins->CutBox.
> ,
> Mayank
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Wed, Nov 2, 2016 at 5:24 AM, Christophe Geuzaine <cgeuza...@ulg.ac.be>
> wrote:
>
> > On 22 Oct 2016, at 04:09, Mayank Jog <mayank...@gma
h does not
support embedded surfaces. Reset it to the default "Delaunay" (1).
> Geometry file and settings dump is attached.
>
> Cheers,
> Bill Slade
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://one
;
> Thank you!
> Mayank
>
> ** "Post processing Generic txt" option in "save as" in gmsh
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of
ly orient along the z-axis?
>
Sure: cf. the "X", "Y", "Z" and "rotate 90 degrees" buttons on the bottom of
the GUI.
> Alex
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://on
s. Add e.g. this to your file:
N = 10;
Transfinite Line {1:8} = N;
Transfinite Line {9:12} = 2*N-1;
Transfinite Line {13:16} = 50 Using Progression 1.2;
> Thanks and Regards,
>
> Kushagra Vidyarthi
>
> <ellipse+domain_geom_o-grid (copy)-msgs.geo><ellipse+doma
___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free softwar
d when I save the plot to a file (say png).
>> Could you please fix this. Thank you.
>>
>> Best regards,
>>
>> Martin
>>
>> ___
>> gmsh mailing list
>> gmsh@onelab.info
>> http://onelab.info/mailman/li
on Mac we package an .app bundle. Configure with cmake
-DENABLE_OS_SPECIFIC_INSTALL=0 to do a standard "unix" "make install".
> Thanks!
>
>
>
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
&
mp; 25 the tag 'out' from the surface 5 since these two were
> created from the breaking of surface 5.
>
> kind regards
>
> Andrew Tsiantis
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http
__
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | htt
using Characteristic Length{})
- and/or using Fields
PS: mesh extrusion with OCC is now implemented
>
> Greetings Benedikt
>
>
>
> Am 13.03.17 um 14:00 schrieb Christophe Geuzaine:
>>> On 13 Mar 2017, at 12:11, Benedikt Oswald <benedikt.oswald@lspr.swiss>
&g
Boundary{ Volume{Out[0]};} );
> Thanks for your help, Miro
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Com
> Earth and Planetary Sciences Dept. Tel. +972-8-9343397
> Weizmann Institute of ScienceFax+972-8-9344124
> Rehovot 76100, ISRAEL Mobile +972-54-6279767
> e-mail: rami.ben-...@weizmann.ac.il
> __
ed recipient, please advise the sender and delete
> this message and its attachments.
> Any unauthorised storing, copying or distribution is prohibited.
> _______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/
t; hello
>>>>>
>>>>> no wonder you cannot see any group
>>>>> there are none defined in the submitted .msh file
>>>>>
>>>>> now from view[3]
>>>>> with
>>>>> Visibility > Force Scalar > 2 (z component)
>
urce code.
> Thanks for a help
>
> Paul
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
h
the reader of this message, are not the
> intended recipient, you should not disseminate, distribute or copy this
> communication. If you have received this communication in error, please
> notify us immediately by return email and delete the original message. Thank
> you.
>
other suggestions?
Add the elementary ids to a list 9selectively), and only create the physical
later.
>
> Alex
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
cubelength, cubelength, cubelength};
>
> Physical Volume("cubebody", 1) = {1};
>
> Mesh.SaveElementTagType=2;
> Mesh.Format=30;
> Mesh 3;
> Save Sprintf("cube%g.mesh",cubelength);
>
> Printf("%g,%g",cubelength,newcubelength);
>
ays
>>
>> http://onelab.info/wiki/Main_Page
>>
>> Regards,
>> -- st
>
> ABE Hiroshi
> from Tokorozawa, JAPAN
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mai
deler/gmsh-3.0.3-
> source/Fltk/Main.cpp:41
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http
should be able to do it directly on your machine?
> Please let me know.
> regards.
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electri
opencascade...
>
> Thank you!
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free so
advance.
>
> Cheers,
> Franz
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www
gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://g
onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
__
t;
> I am looking forward to your response,
>
> Kind regards,
> Sergio Logrosán
>
>
>
>
> _______
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrica
so is there a way
> to fix it.
>
> nb: the .gmsh* files have been removed ...
>
> Thanks
>
> Paul
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geu
l, telephone or facsimile. We will be happy to accept a reversed charge
> call (call collect).___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical
> by law. Unauthorised use, copying or disclosure of any
> of it may be unlawful. If you have received this
> communication in error, please contact us immediately
> by email, telephone or facsimile. We will be happy to
> accept a reversed charge call (call collect).
>
>
&g
ist
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
on-connected
> meshes right? This woud not be what I want. Can these then be connected?
>
> Could you give me a hand with this geometry/mesh?
>
> Thanks very much !
> Danny.
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http
you tell me how I get curved mesh, instead of smaller linear increments?
>
> Thanks,
>
> Brian Chubb
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Chr
;
>
> --
> Jeremy Theler
> www.seamplex.com
>
>
>
> On Mon, 2017-05-22 at 20:52 +0200, Christophe Geuzaine wrote:
>>
>>
>> Here's an example, for Gmsh 3.0.2:
>>
>>
>> SetFactory("OpenCASCADE");
>>
>>
>> Box(1)
>
> Sincerely,
> and with request for help
> Roman Przylucki
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Elec
field on a 3 grid that covers your surface: Gmsh will
happily interpolate the volume data on the non-planar surface.
> Yao
> Sent from my phone
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/g
__
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: htt
es.
Christophe
> Noam
>
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.u
t; Andrew
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefi
> Salome.
>
> kind regards
>
> Andrew
>
>
> Erbe Elektromedizin GmbH Firmensitz: 72072 Tuebingen Geschaeftsfuehrer:
> Christian O. Erbe, Reiner Thede Registergericht: Stuttgart HRB 380137
>
> ___
> gmsh mailing lis
line by
> line in order to further refine what I don't need.
>
> I do hope though that the documentation of the source will come sooner rather
> then later.
>
> On Tue, Oct 10, 2017 at 11:25 AM, Christophe Geuzaine <cgeuza...@ulg.ac.be>
> wrote:
>
>
> > On 8 Oct
d - first engineer - LSPR AG - phone +41 43 366
> 90 74
> Grubenstrasse 9, CH-8045 Zürich, benedikt.oswald@lspr.swiss
> --
>
>
> _______
> gmsh mailing lis
hat I am having.
>
> Thank you all for your time and I look forward to who so ever replies.
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Ch
of GMSH and is the MEgde used in drawing the
> mesh on the GUI?
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering an
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefio
for more details. I’m using MacOS Sierra 10.12.6 and
> Gmsh 3.06-git.
>
> Many thanks in advance,
>
> Rodolfo
>
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof.
t; After running the codes, I opened the .msh file with Gmsh. Then, I found
> there are some repeated nodes at the interface of two surfaces (attachment1).
> However, if I use gmsh gui to create this model and mesh it, then this issue
> doesn't exist. Any suggestions or comments are great appr
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/listinfo/gmsh
--
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | h
rate the 2D mesh, the code gets stuck in some infinite
> loop.
>
> Could you please help with these issues? Thank you.
>
> A.
>
>
> ___
> gmsh mailing list
> gmsh@onelab.info
> http://onelab.info/mailman/list
1 - 100 of 767 matches
Mail list logo
