Any way you could just put a copy in a post to this list?
Tony Thigpen
Sam Golob wrote on 12/22/19 2:36 PM:
Hi Folks,
I've just completed a new article which you might find interesting
to read. It is on the Updates page of www.cbttape.org on File 120, as
member BM1912DE
. This is
a vendor product where the vendor died many years ago and nobody took
over the product. My customer has had me modify the source to both
compile under and create output code that is compatible with z/VSE
Cobol/LE and CICS/TS.
If you want to try it, just let me know.
Tony Thigpen
Charles Mills
) Vers(V1.1) Genlvl(2201W4110)
CAS9075I - Service(CA-ENF/DB2 ) Vers(V1.0) Genlvl(2201W5100)
More from the log:
CAS9217I - ENF DB initialization starting
CAS9218I - ENF DB initialization complete
CAS9207E - CA-ENF Database Error 1600
CAS9203E - CA-ENF Initialization error - terminating
Tony Thigpen
of on a DR box. It may just be because the data
was backed-up with CA-ENF up, but I have not seen this one before.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
is stored. I want, as a one
time job, to create a listing with a single line per member/PDS set:
Member_name PDS_name
I figure there is something already available before I start writing
something new.
This system does *not* have any PDSE libraries as it is OS/390 02.10.
--
Tony Thigpen
HISTORY:
DATELPAR VERSION INSTALLER TASK
05/30/04 DCUF 3.1.9 BPIP 664964
05/30/04 DCU0 3.1.9 BPIP 666222
Tony Thigpen
Mark Jacobs wrote on 12/9/19 4:37 PM:
Browse the load module and see if there are any eye catchers/copyright notices
in it.
Mark
I have an auto-started initiator running DSSUMON and I don't know what
it is doing. Anybody know what this program does? I think it's a vendor
program that we don't license anymore. The messages don't supply any
vendor name.
--
Tony Thigpen
ed at both
ends, just at the end that is not starting the FTP transfer.)
Tony Thigpen
Gadi Ben-Avi wrote on 12/4/19 8:54 AM:
The systems are not connected in any way.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Edgington, Jerry
Sent: Wednesday, December 4, 20
. And, those differ on the
z/VSE site depending on which TCP/IP product you have there.
Tony Thigpen
Gadi Ben-Avi wrote on 12/4/19 8:16 AM:
Hi,
We need to transfer files from z/OS to VSE.
The files are large, variable and have long record lengths.
The files will be transferred using open systems
already issues wither using a tape manager (we use
RMM) or even in a DR situation with no tape manager and just a minimum
system. The web interface to the unit, which is seldom needed, is simple
and easy for the operator. I switched from Secure Agent and am very glad
that I did.
Tony Thigpen
A copy of the assembler listing might be helpful.
Tony Thigpen
Sebastian Welton wrote on 9/5/19 5:39 AM:
A colleague of mine has been developing an MPF exit which calls System REXX but
this seems to have thrown up a weird type of error. The program compiles fine,
is placed in LNKLST, MPFLST
Yes, is the very short answer.
Tony Thigpen
Raphael Jacquot wrote on 8/22/19 8:18 AM:
On 8/22/19 2:07 PM, John McKown wrote:
https://www.theregister.co.uk/2019/08/20/ibm_openpower_isa/
Basically, from what I read, this means that other companies can produce
competing chips which implement
he closing boundary should be:
--SIMPLE BOUNDARY--
The rules:
The boundary setting does not have dashes.
The opening boundary has two leading dashes.
The closing boundary has two leading dashes and two trailing dashes.
Tony Thigpen
Roberto Halais wrote on 8/9/19 3:36 PM:
You must finish with:
David,
Go it running. Now I need to play with the control card options. Thanks.
Tony Thigpen
Tony Thigpen wrote on 7/30/19 9:47 AM:
David,
Thanks. I now have CBT 112 installed and linked.
I can't find an example of the correct batch JCL to execute the command
within the file. Do you have
David,
Thanks. I now have CBT 112 installed and linked.
I can't find an example of the correct batch JCL to execute the command
within the file. Do you have some JCL you can share?
Tony Thigpen
David Spiegel wrote on 7/30/19 8:01 AM:
Hi Tony,
Please look at the VTOC Command Processor
No.
Tony Thigpen
PINION, RICHARD W. wrote on 7/30/19 8:39 AM:
Do you have any third part DASD reporting software, i.e. FDREPORT?
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Tony Thigpen
Sent: Tuesday, July 30, 2019 7:40 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject
s may have already written, so before I
started from scratch, I figured I would ask here.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ut sysplex is turned on (from an earlier time
when they had multiple systems). It looks like all the dasd volumes
restored correctly. I am not missing any.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instruct
),SPACE=MAX
This is z/OS 1.13.
Am I correct?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ng message, it can't be driven by message number (like most
sysrexx stuff) so I need to drive it based on the WTO descriptor code,
but I don't know if that is possible with SysRexx.
And, then I somehow need to intercept the "un-stick" DOM macro ca
My software emails the customer a notice once a day, if the customer
adds the correct email to the configuration.
Tony Thigpen
Charles Mills wrote on 6/30/19 6:40 PM:
Okay, I am "dropping up one level" from my question about persistent WTO
messages. The REAL question is &
All my VSE systems are under VM, but all my z/OS systems run native.
But, with VSE, there are some things I don't want to do before the "CP
IPL xxx' statement in the profile exec, so I do them as early as
possible in the VSE IPLs
Tony Thigpen
John McKown wrote on 6/4/19 10:43 AM:
O
We have done exactly what you are thinking using 30amp twist plugs.
Tony Thigpen
Christian Svensson wrote on 6/4/19 10:32 AM:
Hi,
This may be an odd question. I bought an z114 and I'm trying to figure out
how to power it.
I've arrived that the single-configuration BPR I have should happily
By "crippled", it could be during early IPL or late shutdown.
Tony Thigpen
John McKown wrote on 6/4/19 8:20 AM:
On Mon, Jun 3, 2019 at 5:23 PM Tony Thigpen wrote:
I would not convert it to LE.
I have strong feelings that any system tool like this must be able to
run in a cripp
, there is no need and
second, I believe that abend fixing is easier with a base address.
KISS rules. :-)
I have no real opinion about making a unix command as I don't really use
unix that much, but personally I would prefer that a unix user not have
access to VM commands.
Tony Thigpen
John
the IODEF people just never considered putting in 'basic' CTCA
support for FICON.
When I asked IBM, I got the response: "It does not matter because NJE
over TCP/IP is the future, not CTCAs."
Tony Thigpen
Tony Harminc wrote on 5/30/19 6:12 PM:
On Wed, 29 May 2019 at 13:46, Jesse 1 Robin
By setting:
$TPRT7,FORMS=*
I am now getting my print into the NPF queue.
I was just too close to it to see it.
Thanks,
Tony Thigpen
Elardus Engelbrecht wrote on 5/30/19 11:34 AM:
Dana Mitchell wrote:
Tony Thigpen wrote:
Maybe you have a 'better way' to use NPF. Could you give me
Thigpen
Dana Mitchell wrote on 5/30/19 10:45 AM:
On Thu, 30 May 2019 09:59:14 -0400, Tony Thigpen wrote:
Maybe you have a 'better way' to use NPF. Could you give me an example
of what you are doing?
So JES2 never selects output for that printer? You don't ever get $HASP150 ?
What I do is all
,
TRKCELL=YES,UCS=0,UCSVERFY=NO,VOLUME=(,,,),
WRITER=,WS=(Q,R/),FSAROLTR=YES
Maybe you have a 'better way' to use NPF. Could you give me an example
of what you are doing?
Tony Thigpen
Dana Mitchell wrote on 5/30/19 9:46 AM:
On Thu, 30 May 2019 06:23:32 -0400, Tony Thigpen wrote:
I
=NO,
SETUP=NOHALT,
NPRO=0,
MARK=YES,
TRKCELL=YES,
WS=(Q,R/)
When I start the printer ($SPRT7), the NPF FSS auto-starts as expected.
It just never pulls the print output from the JES2 queue.
Thanks,
Tony Thigpen
may allow multiple types of paths (one of which
*may* be a CTC), but JES2 does not know or care about the path selected.
Specifically, JES2 can no longer talk directly to a CTC.
Tony Thigpen
Jesse 1 Robinson wrote on 5/28/19 7:00 PM:
I'm not sure what Tony T. means. We have only FICON CTC
FYI, JES2/NJE does not support FICON CTC connections. They only support
ESCON/BASIC CTC connections, which you don't have on a z14.
Tony Thigpen
Munif Sadek wrote on 5/28/19 10:40 AM:
we are getting new z14 and time to revisit our CTC configuration.
Is there a complete documentation on FICON
Someone spent a lot of time to figure that method out.
Tony Thigpen
Alan Young wrote on 5/24/19 8:33 PM:
The Implementing REXX Support in SDSF redbook (
http://www.redbooks.ibm.com/abstracts/sg247419.html?Open ) has some sample code
for COBOL to call the SDSF interface via REXX
Yes, I have looked at that section, many times. There is some vagueness
about some of the details that I guess would not be vague if I knew what
I was reading about. :-)
Tony Thigpen
Tom Marchant wrote on 5/22/19 10:46 AM:
On Tue, 21 May 2019 22:03:35 -0400, Tony Thigpen wrote:
Some
is not started because our RMM proc in
SYS1.PROCLIB has a different name.
Of course, this could all be just a coincidence and I am still missing
something. :-)
Tony Thigpen
Mark Zelden wrote on 5/21/19 4:31 PM:
On Tue, 21 May 2019 10:27:20 -0400, Tony Thigpen wrote:
I am looking at my ipl
Thanks. That helped a lot.
One of the questions I am trying to answer is "who is starting RACF
during IPL". It's not in COMMNDxx.
Tony Thigpen
John McKown wrote on 5/21/19 10:56 AM:
On Tue, May 21, 2019 at 9:47 AM John McKown
wrote:
On Tue, May 21, 2019 at 9:27 AM Tony Thig
.
Does the INITRTN force an autostart as if START(YES) was specified?
It appears that jobs started with IEFSSNxx start as normal JES jobs. Can
IEFSSNxx be used to start tasks which run as SUB=MSTR.
--
Tony Thigpen
--
For IBM
BPXAS - ENDED - TIME=22.02.52
22.02.52 HUP1 STC03369 $HASP395 BPXASENDED
22.02.52 HUP1 STC03370 $HASP395 BPXASENDED
22.03.16 HUP1 F OMVS,SHUTDOWN
22.03.16 HUP1 IEE342I MODIFY REJECTED-TASK BUSY
Thoughts?
Tony Thigpen
Tony Thigpen wrote on 5/14/19 5:55 PM:
F
Currently, all the TCPIP jobs have to specify the //SYSTCPD DD
statement. Since we only have one stach and one TCPIP.DATA file, are
there any options at the system level that will eliminate the need for
each batch job to have a //SYSTCPD DD?
--
Tony Thigpen
= 0 CMD=BPXPINPR
SERVER=Init Process AF=0 MF=0 TYPE=FILE
Tony Thigpen
Cieri, Anthony wrote on 5/14/19 6:05 PM:
OMVS is still doing something
You might try D OMVS,A=ALL for more information
-Original Message-
From: IBM Mainframe
F BPXOINIT,SHUTDOWN=FORKINIT
BPXM036I BPXAS INITIATORS SHUTDOWN.
F OMVS,SHUTDOWN
IEE342I MODIFY REJECTED-TASK BUSY
Tony Thigpen
Cieri, Anthony wrote on 5/14/19 5:50 PM:
Under the OAS column of your D A,L display there is still one task.
Was a $P JES2 command ever issued
$DA,X
IEE707I $DA,XNOT EXECUTED
Tony Thigpen
Feller, Paul wrote on 5/14/19 5:50 PM:
Sometimes a $DA,X can help find what is going on. Also all the other
suggestions are good to try.
Thanks..
Paul Feller
AGT Mainframe Technical Support
-Original Message-
From: IBM Mainframe
A=002F PER=NO SMC=000
PGN=N/A DMN=N/A AFF=NONE
CT=000.630S ET=00.25.05
WKL=SYSTEM SCL=SYSSTC P=1
RGP=N/A SRVR=NO QSC=NO
Tony Thigpen
?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
What does "PARSE SOURCE" return?
Tony Thigpen
Sean Gleann wrote on 5/1/19 4:38 AM:
Hello all
I am developing a REXX that, for a number of reasons, needs to know the
name of the PDS that it is stored in.
The intention is that the REXX will be invoked from ISPF option 6, so
typing some
If IPv4 only, just do an INITAPI, GETHOSTID, TERMAPI. This will return
the primary address of the TCP/IP stack that your job is associated with.
But, if you already have a connection to another host, that host can get
your address easily.
Tony Thigpen
Stan Weyman wrote on 4/29/19 8:00 AM
secured well.
This is not to start a discussion on the security issues. I am just
responding to the comment that "part of the logic related to the design
of CSSMTP, is the "predicate" that the mainframe is only interested in
outbound communications."
Tony Thigpen
Allan
Nothing specific as to the database. Current database is Adabas but they
want to eliminate the SAG products.
Plenty of network connectivity.
They are considering using z/Linux on a separate cpu.
Tony Thigpen
Matt Hogstrom wrote on 3/9/19 9:14 AM:
What is the database type you want to access
Management is asking:
What tools are available for z/OS programs to access in real-time a
z/Linux database with full update capibilities?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions
have not found a way for the information from the IOCONFIG statement
to used instead.
I am worried that I am missing something.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
.
Does anybody know of a free tool that would help with this process?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
You know, I can code an IOCP much faster. I just wish I could tell HCD
to: "take this IOCP source, set everything up for me and ask me for any
extra information HCD needs".
Tony Thigpen
Tony Thigpen wrote on 2/19/19 8:37 PM:
It suddenly dawned on me that I was miss-understandin
It suddenly dawned on me that I was miss-understanding "logical address
(same as CUADD)". I was reading it as "logical address which will be set
to the specified CUADD value" instead of "logical address (which others
call CUADD)".
Duh!
Tony Thigpen
Neubert,
on the panel that seems remotely where I would specify the
CUADD= value.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Thanks.
Tony Thigpen
Allan Staller wrote on 2/13/19 10:02 AM:
For each affected volser:
HSEND LIST TTOC(volser) ODS(x)
HDEL 'datasetname' for each indicated dataset.
HSEND RECYCLE ALL EXECUTE PERCENTVALID(0)
HTH,
-Original Message-
From: IBM Mainframe Discussion List
in 2001, so we are just going to write-off the data on the
tapes as 'aged-out'.
What is the proper procedure to eliminate these volumes from HSM?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions
After some looking around, I found that the printer had an internal menu
that included an option to treat LF as CRLF. This menu item was not on
the web interface for the printer, which is where I was initially looking.
Tony Thigpen
' (Carriage Return/Line Feed). I don't see nay options
that will change this behavior.
Am I missing something?
Or, am I going to have to use an exit?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions
Thanks, Sounds like EXPORT/IMPORT is the best way. I was hoping for some
'trick' with the panels, but I guess not.
Tony Thigpen
Gadi Ben-Avi wrote on 1/14/19 7:22 AM:
This is a job I use to copy an IODF to another system.
//DEL EXEC PGM=IDCAMS
//SYSPRINT DD SYSOUT=*
//DD1 DD DISP=SHR,UNIT
that
there is a way to specify the volume where the file is located, so HCD
always says the file can not be found.
Is there a way to specify the volume, along with the name, when using
the panel? Or, a command to start the panels using the uncataloged IODF
file?
--
Tony Thigpen
an assembler programmer, not a C programmer, so I view the reports
with some speciesism.
Tony Thigpen
scott Ford wrote on 1/12/19 1:33 PM:
I am speaking in terms of development cycle.
On Sat, Jan 12, 2019 at 1:32 PM scott Ford wrote:
David and Zman,
Both good points, C is certainly faster than
Same for z/VSE. It works, but spending time in key-0 is not something
most people want to do.
Tony Thigpen
Seymour J Metz wrote on 1/10/19 3:09 PM:
AFAIK, a PSW key of 0 in MVS will allow waiting on an ECB of any key, but I can
think of reasons to disallow it. I wouldn't even try to guess
Seymour,
Can a z/OS program, running in key-0, wait on an ECB that is in key-8?
Tony Thigpen
Seymour J Metz wrote on 1/10/19 1:36 PM:
1. It is part of the architecture that with a PSW key of 0 you can access any
storage not protected by some other mechanism, e.g., low storage protection
Joseph,
My z/OS experience is still limited. Most of my experience is with
z/VSE. In z/VSE, if in key-0, I can access any other key storage. I
don't know if this is true for z/OS. Someone else will have to speak up
on that issue.
Tony Thigpen
Joseph Reichman wrote on 1/9/19 10:39 PM
that time period expires *or* when socket activity
occurs, which ever happens first.
In other words, a TIMEOUT= pointer to low-values is not the same as not
specifying the TIMEOUT= option. Your posts make me think that you may be
using a low-value TIMEOUT value.
Tony Thigpen
Joseph Reichman wrote
What for? I think you are just making it worse.
Tony Thigpen
Joseph Reichman wrote on 1/9/19 1:51 PM:
Hi
I quite don’t understand this but In my testing when I had WTO's the modify
logic would work. I now decided to put a STIMER after the SELECT_LOOP
I.E.
STIMER WAIT,DINTVL
By fancy, I mean stuff like 10 nested functions.
(from the top of my head and I bet I missed a paren)
if
h2d(right(strip(substr(x,5,10)),'B')+strip(right(substr(,5,10),5),'B')
= strip(right(substr(input.4,5,10),6),'B')
then do
Tony Thigpen
Paul Gilmartin wrote on 1/8/19 3:48 PM
Alabama,
where few spoke it. (Yes, management did catch him after a month or so.)
Tony Thigpen
Pew, Curtis G wrote on 1/8/19 3:05 PM:
On Jan 8, 2019, at 2:03 PM, Tony Thigpen wrote:
"C is the first write-once, read-never language."
Not even close; APL was around nearly a decad
By the same token, I have hear it said many times:
"C is the first write-once, read-never language."
Tony Thigpen
Charles Mills wrote on 1/8/19 1:58 PM:
a policy of not allowing the use of assembler for any new code which is
understandable
One might argue that any asse
also are 'do it all' routines.
And, I am happy to agree to disagree on what is 'easiest'. We all have
our own unique experiences and skill-sets.
Tony Thigpen
David Crayford wrote on 1/8/19 10:51 AM:
Tony,
The company I work for now has a policy of not allowing the use of
assembler fo
it worse.)
It boils down to: For simple though, the HLL interface is 'OK', but just
like the AT commercials, are you ok with 'Just OK'?
Tony Thigpen
David Crayford wrote on 1/8/19 5:36 AM:
I'm wondering why anybody would choose to write a TCP server using
EZASMI macros as opposed to the UNIX
You might need to post your full code so people can look at it to find
the problem.
Tony Thigpen
Joseph Reichman wrote on 1/5/19 7:52 PM:
This is the situation both the main task and 4 sub tasks have selects after
the time outs of the main task and subtasks I do wto
When I get a connection
are not sharing the ECBs between the main task and the
subtasks.
As a side note, I always recommend that you have a master 'shutdown' ECB
for all your EZA subtasks and that you use SELECTEX instead of SELECT so
that the SELECTEX will trigger if the main task sets the 'shutdown' ECB.
Tony
When I use HCD to 'Work with EDTs', it shows locally defined esoterics,
but not the one for 3590-1.
When I use HCD to 'View generics by name', I see 3590-1, but I can't
change it.
Can I just add a 3590-1 in 'Work with EDTs' and then that override the
one the system generates?
Tony Thigpen
.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
e to what needs to be changed so that tapes defined
to RMM as CART3590 will only use the real 3590s?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with th
It works on a VM volume or a VM mini-disk.
Tony Thigpen
Nai, Dean wrote on 11/14/18 11:44 AM:
Hi Tony,
Not a VM person but working on a DR now. Does that work for a VM volume?
Dean Nai
On 11/14/18, 11:07 AM, "IBM Mainframe Discussion List on behalf of Tony Th
Use REFORMAT in ICKDSF.
Tony Thigpen
Nai, Dean wrote on 11/14/18 10:18 AM:
Anyone have any JCL to clip a VM volume from one name to another. Thanks in
advance.
Dean Nai
Senior z/OS Systems Programmer
Technical Services Group
Department of Information Technology
State of New
employee helping him understand the
programs. And, he told everybody the code was his (per the guy that I
helped later). That stinks. [The bug was already corrected on my web
site and available for download.]
Tony Thigpen
Farley, Peter x23353 wrote on 11/12/18 1:13 PM:
Not jumping on Ed Jaffe
the volid to be
in position 2-7 of the display.
Position 1 can be:
Blank = Verify
M = Mount
D = Demount
K = Keep (put in rack)
R = Retain (keep near by for additional use)
Position 8 can be:
Blank = Not at load point
S = Standard Label
N = No Label
A = AL Label
X = Non-Standard Label
Tony Thi
of position 8.
Is there some manual that documents all the possible messages that z/OS
sends to the drive? And for bonus points, do all the different tape
managers, such as RMM, CA1 and Zara use the same standard?
--
Tony Thigpen
Thigpen
Allan Staller wrote on 11/6/18 8:57 AM:
Autoswitch. In z/OS the commands a v xxx,as,on or v xxx,as,off
I believe there is an IODF option to make the drives switchable.
Al
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Tony Thigpen
Sent: Tuesday, November 6, 2018
/ONLINE to release/reserve the
drives.
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
For multiple reasons, don't. It is a very, very bad idea.
Tony Thigpen
R.S. wrote on 10/29/18 12:03 PM:
I'm going to attach HMC remotely.
Remote means it is behind the router, so no broadcasts are realayed,
that alos mean one has to provide IP of the CPC (instead of
auto-detection), etc
an email war. It escalated
before I had a chance to even think about the LPAR id.
Tony Thigpen
Elardus Engelbrecht wrote on 10/15/18 2:35 AM:
Tony Thigpen wrote:
Why would the D M=CPU display a wrong number.
What number? What is wrong?
Perhaps something is wrong because you read/posted
ial Number: 0008400A58C7
Additionally, VTAM-Print says:
(GSMINITL) THIS CPU: 758C7
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
The specification for NJE are found in SA22-7539.
Tony Thigpen
Dyck, Lionel B. (RavenTek) wrote on 09/21/2018 12:48 PM:
My understanding is that this is an NJE issue. The user is using XMITIP to
generate an e-mail in SMTP format, placing the data in the JES Spool routed to
z/VM where
> I don’t know if it’s possible to encode in BASE64 the txt file when
> we transmit the mail but it will be a solution like the PDF or BIN
> format…
PDF and BIN files are sent as BASE64. BASE64 encoding of TXT files is
normal in the email world. That is your best approach.
Tony Thig
I don't think it's really going to matter in a few years. These
millennials can't seem to get out of bed before noon anyways. :-)
Tony Thigpen
Paul Gilmartin wrote on 09/18/2018 02:54 PM:
On Tue, 18 Sep 2018 18:38:02 +, Seymour J Metz wrote:
Having a single time zone doesn't force
Mis-read as delayed one hour for central.
Tony Thigpen
Steve Smith wrote on 09/18/2018 01:31 PM:
Your statement exactly agrees with Gil's, so why do you think you're
disagreeing with him?
sas
On Tue, Sep 18, 2018 at 1:08 PM Tony Thigpen wrote:
Paul Gilmartin wrote
> Prime time sh
n Pacific time. I don't know what they do now.
> But there's the school bus problem.
Not really. It would actually make the bus problem worse. It's really
the 'I want some time to go fishing or boating after work' problem.
Tony Thigpen
Paul Gilmartin wrote on 09/18/2018 12:08 PM:
On Tue,
breakfast.
We really need to get out of the '8-5' work times. While outside work
needs to be daylight centered, we could make our standard workday '6-3'
and a lot more people would be happy with the available daylight after work.
Tony Thigpen
Mike Schwab wrote on 09/18/2018 11:19
Can they not just ignore the 1 or 2 programs when they review the output?
Tony Thigpen
McCabe, Ron wrote on 09/12/2018 02:52 PM:
Hello,
Question from our developers...is there an easy way to search for a string in all COBOL
programs except for 1 or 2? So what they would like to do is search
, but that is another can of
worms.
Am I understanding the z/OS side correctly?
--
Tony Thigpen
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I guess the question is:
Why is it ok for the IOCP, but not ok for the IODEF?
Sounds like someone in the z/os group IODEF programmer did not talk to
the hardware guys.
Tony Thigpen
Neubert, Kevin wrote on 08/28/2018 12:29 PM:
Don't believe FICON supports BCTC. If ESCON is no longer
Control unit 3200 of type FCTC cannot attach device 3260
of type BCTC.
What gives?
(I did try leaving the IODEF at FCTC and the IOCP at BCTC, but JES2
grips and will not establish the link.)
--
Tony Thigpen
--
For IBM
Tony Thigpen
Tony Thigpen wrote on 08/26/2018 07:43 PM:
Forgot:
LOADPARM on screen is: 12FE02M1
Tony Thigpen
Tony Thigpen wrote on 08/26/2018 07:40 PM:
More info. Just did some testing:
IEA101A SPECIFY SYSTEM PARAMETERS FOR z/OS 01.13.00 HBB7780
IEE600I REPLY TO 00 IS;CLPA
IEE252I MEMBER
Forgot:
LOADPARM on screen is: 12FE02M1
Tony Thigpen
Tony Thigpen wrote on 08/26/2018 07:40 PM:
More info. Just did some testing:
IEA101A SPECIFY SYSTEM PARAMETERS FOR z/OS 01.13.00 HBB7780
IEE600I REPLY TO 00 IS;CLPA
IEE252I MEMBER IEASYS00 FOUND IN SYS1.PARMLIB
IEA107I CLPA IGNORED
IEA007I
N SYS1.PARMLIB
IEE252I MEMBER PROG00 FOUND IN SYS1.PARMLIB
CSV410I APF FORMAT IS NOW DYNAMIC
IEE252I MEMBER LPALST00 FOUND IN SYS1.PARMLIB
IEA713I LPALST LIBRARY CONCATENATION
Tony Thigpen
Peter Relson wrote on 08/26/2018 07:25 PM:
Tony,
When you replied "0,CLPA" to get the
I found both CLPA and OPI=YES in the IEASYS00 member. I am going to
remove OPI=YES and see if that removes the problem.
Tony Thigpen
Peter Relson wrote on 08/25/2018 09:21 AM:
The OP really was noting that he had to specify something to keep the IPL
going. Whether that was CLPA or something
201 - 300 of 581 matches
Mail list logo
