Is there a means via SYNCSORT to save a data item found on the 1st input
record and then have it placed on all subsequent output records.
For example.
1. Input 1 - 07/06/2012 asfasdlfjl. (save the date
07/06/2012 and not output the record)
2. Input 2 - poiutkjgfertqe
Sorry, the formatting didn't retain how I had originally keyed it.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of George, William@FTB
Sent: Friday, July 06, 2012 2:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SYNCSORT - Save a data
[mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of George, William@FTB
Sent: Sunday, July 08, 2012 3:23 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SYNCSORT - Save a data item for use in OUTREC output
Wayne
It appears the E15 exit will not work for our needs. And I humbly
apologize as the example I gave
Please ignore. A test as I've not seen any posing in a while which is
quite odd
__
CONFIDENTIALITY NOTICE: This email from the State of California is for the sole
use of the intended recipient and may contain confidential and
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
On Behalf Of Ed Gould
Sent: Wednesday, August 08, 2012 1:31 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Decouple Accenture's Install-1 from CICS
On Aug 8, 2012, at 1:56 PM, George, William@FTB wrote
Is there a means via a single SARBCH command to print all SEQs of a GEN=
for a job. (that was hard to put words to make sense ;-) )
That is, if a job executed multiple times during a batch cycle and each
time it was archived to SAR it received the same GEN= number each would
receive a
suggestion.
-Original Message-
From: Robert A. Rosenberg [mailto:hal9...@panix.com]
Sent: Tuesday, October 23, 2012 2:34 PM
To: IBM Mainframe Discussion List
Cc: George, William@FTB
Subject: Re: SARBCH - PRINT all SEQ's of a GEN= for jobs
At 13:01 -0700 on 10/23/2012, George, William@FTB wrote
Test test
I've not been receiving posts so this is just a test.
Bill George
Senior Programmer Analyst (Specialist)
FTB | Tax Systems and Applications Bureau | BETS Interface Team
Office: 916.845.6459 | ms: L-210 | location: LA2B-B-5-02
email:
Without seeing your code I'll guess you don't have your single and double
quotes correct.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Micheal Butz
Sent: Tuesday, April 01, 2014 2:31 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
are available at the site you are trying to connect to?
On Fri, Apr 11, 2014 at 10:32 AM, George, William@FTB bill.geo...@ftb.ca.gov
wrote:
Is anyone aware of a means to configure Attachmate's Extra X-treme (v9.3)
emulator to display a screen size other than the base models (2,3,4,5)?
Checking the help
Thanks Peter!
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Farley, Peter x23353
Sent: Friday, April 11, 2014 10:14 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Emulator Screen Size with Attachmate Extra X-treme 9.3
From a VTAM
Yes, I am aware there are other emulators that do this and I actually used
Vista at a previous shop and is my favorite however... I'm stuck with Extra!
X-treme.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Skeldum, William
Sent:
I received an off list email from Attachmate who stated that after speaking
with their support group , Extra doesn't have the ability to define custom
screen sizes. :(
__
CONFIDENTIALITY NOTICE: This email from the State of
Good idea but... our USB's are locked down too. LOL. Security is taken
seriously here.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Christian Birr
Sent: Friday, April 11, 2014 1:09 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: AW:
). I
use the format of LOG appl, logmode.
As always, YMMV.
HTH,
Linda
Sent from my iPhone
On Apr 11, 2014, at 2:01 PM, George, William@FTB bill.geo...@ftb.ca.gov
wrote:
It's the emulator that is the wrench which I have zero pull over in
the apps on our desktop... :(
-Original Message
with Attachmate Extra X-treme 9.3
The system programmer at your site defines the logmode and its parameters.
On Mon, Apr 14, 2014 at 10:14 AM, George, William@FTB bill.geo...@ftb.ca.gov
wrote:
Thanks Linda. But, where would I define the screen parameters, for example;
60 x 132?
Bill
We are at File-Aid/MVS 9.3.0
When a sequential file is displayed using a Browse/Edit mode of F (Format) and
the appropriate Record layout (copybook) indicated, I'm seeing two ways a
numeric field is being displayed if the field is zeros.
In the file a Numeric 3 field that has '000' in the record
Found it.
The command ZERO or ZERO OFF controls this display.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Tuesday, June 03, 2014 1:00 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: File-Aid/MVS - Display
Couple of quick thoughts.
- Make sure you are actually logging off and not just killing your
session. Profile vars are NOT saved if you do not log off properly.
- Also, check to see if there is not an initial macro running that sets
that to PAGE. More likely something like this if others are
I have a need to check 50 datasets (50 gens of a GDG) and extract
records that match my criteria. I also would like to know which dataset
in the concatenation the record was extracted from by adding an
indicator to the output record. Is this possible via Syncsort or
ICEMAN?
I've made a quick
Sorry for the lack of a more descriptive subject. I did mean to go back
and put one in but plain forgot. That seems to be happening a bit more
than before. Hmmm.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of George, William@FTB
wrote on
12/20/2012 09:06:59 AM:
From: George, William@FTB william.geo...@ftb.ca.gov
To: IBM-MAIN@listserv.ua.edu,
Date: 12/20/2012 09:08 AM
Subject: Re: SYNCSORT or ICEMAN
Sent by: IBM Mainframe Discussion List IBM-MAIN@listserv.ua.edu
Sorry for the lack of a more descriptive subject. I did
all and submit for the other 49 GDGs.
When done, delete the empty datasets and utilize the remainder with
records.
On Thu, Dec 20, 2012 at 11:30 AM, George, William@FTB
william.geo...@ftb.ca.gov wrote:
Thanks. A small detail I, again forgot, is these are TAPE datasets.
:( Otherwise this would
FIELDS=(C'02',1,80)
/*
If you meant something doing all the job automagically :D, then I don't
know.
Regards.
Max
Da: George, William@FTB william.geo...@ftb.ca.gov
A: IBM-MAIN@LISTSERV.UA.EDU
Inviato: Giovedì 20
No SAS
-Original Message-
From: IBM Mainframe Discussion List on behalf of Robert Bardos2
Sent: Fri 12/21/2012 3:56 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SYNCSORT or ICEMAN
quote
I have a need to check 50 datasets (50 gens of a GDG)
and extract records that match my criteria. I
ail matter, you can
email us directly at supp...@casisoft.com.
Regards,
Randy Benderman
CASI Software
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Monday, November 02, 2015 2:23 PM
To: IBM-MAIN@LISTSERV.UA.E
014.ftb.ca.gov>, on
11/02/2015
at 10:23 PM, "George, William@FTB" <bill.geo...@ftb.ca.gov> said:
>We have several jobs that use JES2MAIL to email reports to various
>users. The JES2 output (in SDSF) from the step creates two entries
Are you referring to the job l
We have several jobs that use JES2MAIL to email reports to various users.
The JES2 output (in SDSF) from the step creates two entries and I'm hoping to
find a means to disable one of them.
The two entries are: (example SDSF entries further below)
1. The main SYSOUT from the job that
IF Condition - I'm Missing Something
On Fri, Feb 17, 2017 at 1:03 PM, George, William@FTB <bill.geo...@ftb.ca.gov
// SET statements are _always_ processed, regardless of any // IF condition.
ref:
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieab
The JCL below
1. Sets symbolic = "A"
2. checks if a dataset exists,
3. if it does exist it changes the symbolic = "B"
4. for the dataset used in the Step3.
However, processing ALWAYS falls into the THEN path even when the RC = 0.
What am I missing?
Note: this is just
:03 PM, George, William@FTB <bill.geo...@ftb.ca.gov
> wrote:
> The JCL below
>
> 1. Sets symbolic = "A"
>
> 2. checks if a dataset exists,
>
> 3. if it does exist it changes the symbolic = "B"
>
> 4. for the dataset us
Thanks for the suggestions.
Yes, I definitely, and easily, could do this with a REXX however :-(
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of scott Ford
Sent: Saturday, February 18, 2017 8:15 AM
To: IBM-MAIN@LISTSERV.UA.EDU
I believe the command you need is: C P'¬' ' ' 80 95 ALL
The picture P'¬' finds all NON blank characters.
Bill
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of willie bunter
Sent: Friday, December 16, 2016 7:15 AM
To:
Bottom Line: I am looking for a means to RECALL a block of migrated GDS (GDG
generation datasets) from the previous month via a monthly task.
BACKGROUND
First, I'm in applications not systems.
Second, we are changing our storage management system where we must now define
(and redefine existing)
@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Tuesday, December 20, 2016 11:04 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: A Means To RECALL Migrated GDS' Based on a Block of Relative Gens
Bottom Line: I am looking for a means to RECALL a block of migrated GDS (GDG
generation datasets) from
' Based on a Block of Relative Gens
> On Dec 27, 2016, at 10:59 AM, George, William@FTB <bill.geo...@ftb.ca.gov>
> wrote:
>
> I found parsing the LISTCAT output easy as I've done it many times and
> much easier to understand. 8-D However. I just found the IBM REXX samp
I've never had success trying it. The one example I have I could not get to
work but it has been a couple of years since then.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tom Marchant
Sent: Tuesday, December 27, 2016 6:43 AM
, George, William@FTB wrote about IGGCSI00:
>I've never had success trying it. The one example I have I could not
>get to work but it has been a couple of years since then.
I've only used it once, and don't remember having any trouble with it.
Certainly easier than parsing LISTCAT
--Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of George, William@FTB
> Sent: Tuesday, December 20, 2016 11:04 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: A Means To RECALL Migrated GDS' Based on a Block of Relative
>
We will be transitioning from Extra! X-treme 9.3 to Reflection Desktop down the
road and I am evaluating its functions and how our current use of Extra! will
translate to Reflections.
One function our group makes good use of in Extra! is the "Print Multiple
Screens" functions. This allows
I have personally used to use snagit but not here at our facility.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Lizette Koehler
Sent: Tuesday, March 14, 2017 1:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Conversion from Extra!
the screens.
This is under Reflection 2014R1 SP1 15.6.745.
Thanks..
Paul Feller
AGT Mainframe Technical Support
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Tuesday, March 14, 2017 15:43
To: IBM-MAIN@LIST
Not sure why I received the fraud message?? I've posted many times.
Bill
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Tuesday, March 14, 2017 1:09 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Conversion from
Yes, that would be a workaround.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Pommier, Rex
Sent: Tuesday, March 14, 2017 1:38 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Conversion from Extra! X-treme 9.3 to Reflection Desktop -
s..
Paul Feller
AGT Mainframe Technical Support
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Tuesday, March 14, 2017 15:43
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Conversion from Extra! X-treme 9.3
Reflection Desktop 16 has these
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Kirk Wolf
Sent: Wednesday, April 05, 2017 7:57 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Copy / Save screen text function in all TN3270 emulators?
I'm
Does anyone know why I might be receiving the "failed our fraud detection
checks" message?
I've been on the list for years.
Bill
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Sent: Wednesday, April
emulators?
Sender: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU>
From: "George, William@FTB" <bill.geo...@ftb.ca.gov>
The nature of LISTSERV.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU
ent-Type: text/plain; charset="utf-8"
Message-ID: <5cb099c9381b449a9e7e310b63c4f...@fg3000.ftb.ca.gov>
Newsgroups: bit.listserv.ibm-main
Date: Wed, 5 Apr 2017 15:42:01 +
Reply-To: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU>
Sender: IBM Mainframe Discuss
I'm having a heck of a time attempting to create a sort header to display the
previous month in MM format.
No matter what I do I get a syntax error and I've attempted many different ways.
Here is the most recent attempt. I do not see why there is a syntax error
where indicated.
SYSIN
AIN@LISTSERV.UA.EDU> wrote on
03/02/2017 02:44:39 PM:
> From: "George, William@FTB" <bill.geo...@ftb.ca.gov>
> To: IBM-MAIN@LISTSERV.UA.EDU
> Date: 03/02/2017 02:45 PM
> Subject: DFHSORT - Date Display of Previous Month Sent by: IBM
> Mainframe Discussion List <IBM-MAIN
Incorporated
2 Blue Hill Plaza #1563, Pearl River, NY 10965
P: 201-930-8234 | M: 512-627-3803
E: cblaic...@syncsort.com
www.syncsort.com
CONNECTING BIG IRON TO BIG DATA
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of George, William@FTB
Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> wrote on
03/02/2017 02:44:39 PM:
> From: "George, William@FTB" <bill.geo...@ftb.ca.gov>
> To: IBM-MAIN@LISTSERV.UA.EDU
> Date: 03/02/2017 02:45 PM
> Subject: DFHSORT - Date Display of Previous Month Sent by: IBM
I am confused about a statement I'm seeing in the DFSORT - ICETOOL Chapter and
its example:
Example 3 - Create files with matching and non-matching records
I've copied the example below and my question is regarding the last line below
and it statement on sorting:
We sort the records of T1 on
If you like the benefits of many split screens then have a logon proc
(Clist/REXX) create the split screens automagically for you each logon. I have
8 session created behind the scenes.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
/2017 03:09:04 AM:
> From: "George, William@FTB" <bill.geo...@ftb.ca.gov>
> To: IBM-MAIN@LISTSERV.UA.EDU
> Date: 10/26/2017 03:09 AM
> Subject: ICETOOL - Question regarding a statement in the ICETOOL Guide
> Sent by: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV
. Yaeger. My copy is dated October 2010. It came from the
DFSORT Team in San Jose, so it should be available from IBM.
sas
On Wed, Oct 25, 2017 at 5:39 PM, George, William@FTB <bill.geo...@ftb.ca.gov>
wrote:
> I am confused about a statement I'm seeing i
- Question regarding a statement in the ICETOOL Guide
That was copyrighted in 2008 and synchronized with z/OS 1.10, 9 years and 6
releases back.
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of George, William@FTB
> Se
send an email to our hotline
(dfs...@us.ibm.com) or you can mail me directly.
Thanks,
Sri Hari Kolusu
DFSORT Development
IBM Corporation
IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> wrote on
10/26/2017 11:41:15 PM:
> From: "George, William@FTB" <bill.geo...@ftb.
Sorry, here is Where to subscribe to TSO-REXX
Send your subscribe request to: lists...@vm.marist.edu
Syntax: SUBscribe TSO-REXX
-Original Message-
From: George, William@FTB
Sent: Wednesday, October 02, 2019 9:33 AM
To: 'IBM Mainframe Discussion List'
Subject: RE
There is a TSO-REXX forum that is quite useful.
tso-r...@vm.marist.edu
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of ITschak Mugzach
Sent: Wednesday, October 02, 2019 8:21 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: REXX LISTDSI
I have an ICETOOL process I cannot seem to get right.
I have two datasets:
1. A BASE dataset
2. A dataset with data to insert into a BASE record IF the key data match
I'd like to outputs.
1. With the BASE records that were NOT updated
2. With the BASE records that WERE updated
Thanks, we have moved on by identifying the groups with the issue and dealing
with them.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tom Ross
Sent: Friday, November 08, 2019 12:11 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: COBOL
Since migrating from COBOL v4 to COBOL v6.1 a few runtime abends have occurred
which seem to have a root cause of data items not being initialized. These
data-items seem to be under a group level where the group level is initialized.
The compile's diagnostic errors listing shows al warning
Greetings
I'm stumped with a sort using IFTHEN logic within a JOINKEYS process.
I can't seem to get away from this error: BOTHFLS HAS INCOMPATIBLE LRECL
NOTE: BOTHFLS is the output file for records in both files. :)
F1ONLY & F2ONLY are self-explanatory.
Here's are the cards:
JOINKEYS
65 matches
Mail list logo
