an idea. I wonder myself how useful it is.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
with.
Doesn't this, as well as the URL from above, assume IA32?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
WAN
Shaul Frenkel
VP Research Development
Shunra Software Ltd.
http://www.shunra.com
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail
On Sun, Jul 06, 2003 at 04:26:20PM +0300, [EMAIL PROTECTED] wrote:
My question is: How can i tell what is the total blocks in a cylinder group?
With dumpe2fs?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe
. Anyway, IIRC, the problem is that making it to work with
secure connections is tricky.
The students might work this out.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
project to MS env?
I believe that even with cygwin or a similar Unix libraries there would
be plenty to do.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
?
Are there reasons to skip such an Ethernet network and keep the
smallest network with a minimum of 4 hosts and a netmask of
255.255.255.252?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED
noticed that I have
\begin{interruptRequest} in the middle:
How does the 2 smaller networks know that 192.168.1.191 and 192 were
initially a broadcast and network addresses? Would they treat any one of
192.168.*.19[12] in the same way?
--
Shaul Karl, [EMAIL PROTECTED] e t
is connected to all that sub networking is about?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail
this is that an ARP request would send the MAC and expect
the IP in return. That is, what is known is the MAC and what is looked
after is the IP. If my understanding is correct then what both of us are
missing is how this integrates into Ethernet communication.
--
Shaul Karl, [EMAIL PROTECTED] e t
to the list is a good idea because the list's archiving
feature. Can you provide URLs for the software and/or email me the tar
ball?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED
for this to start working. Yet doing this has very low
priority on my schedule.
All those UPSs have serial interface.
I am not sure whether the manufacturers don't sometimes modify the
user interface while still keeping the model number as it was prior to
the modification.
--
Shaul Karl, [EMAIL
of
dis-assembly of a suppied DOS TSR.
Can you post the communication protocol of that model? If not then
maybe you can post the source? In the UPS business, as in many other
areas, newer work seems to highly utilize previous work.
--
Shaul Karl, [EMAIL PROTECTED] e t
in any way.
2. I do want as many people as possible to use the same hardware and
software that I am using.
3. Getting us to standardize on a few and maybe only one UPS package
can help all, local users as well as local OEMs, to support Linux.
--
Shaul Karl, [EMAIL PROTECTED] e t
.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
files to B, but
currently one of those 2 directions is not working. Which direction is
not working?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body
to present to the user this information so he would know which
interface his modem is connected to more easily, in case he have more then
one ethernet card.
You seem to be primarily interested in interfaces that are up. Why
don't you check the output of /sbin/ifconfig?
--
Shaul Karl, [EMAIL
solution for this
situation.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
?
Perhaps cd /tmp rather then cd /? I assume that the proposed cpio
command would extract the files into /tmp or to a sub directory of /tmp.
Of course that would leave quite a lot of work to the admin but
otherwise he would have reinstall the package, wouldn't he?
--
Shaul Karl, [EMAIL
compatibility
would sound better.
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
that the
short cable will undo the crossing effect of the current cable? What
is a punch down wall jack? Is it the the other option of a fasteners
using wall jack?
--
Shaul Karl, [EMAIL PROTECTED] e t
=
To unsubscribe, send mail to [EMAIL
principle (? - SHOVACH YONIM).
What is the birdhouse principle and how it gets demonstrated in the
KEY ID space?
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
and the small depth of the existing rings.
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail
: Park Sibel, Rosh Haain
address: Israel
phone:+972-3-902
fax-no: +972-3-9024222
e-mail: [EMAIL PROTECTED]
nic-hdl: AA957908-RIPE
changed: [EMAIL PROTECTED] 20010607
source: RIPE
$ exit
exit
Script done on Sat Aug 2 05:26:06 2003
--
Shaul
of days, being happy
with their lower rates and good service.
3. Knowing the company long term standing support for Linux.
I am not affiliated with Actcom in any way.
--
Shaul Karl,shaul @ actcom . net . il
.
Is that the case?
What about mail sent by Actcom customer directly to an IZ customer?
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message
192.168.0.34 nerhalayla
192.168.0.19 sitvanitUMLgateway
192.168.0.37 shoshanaGateway
192.168.0.9calanitGateway
192.168.0.38 shoshana
192.168.0.5sitvanitGateway
192.168.0.6sitvanit
$
--
Shaul Karl,shaul @ actcom . net .il
On Sun, Aug 03, 2003 at 03:26:51PM +0300, Mix Sella wrote:
On Saturday 02 August 2003 17:56, Shaul Karl wrote:
$ /usr/sbin/pppd call provider dryrun
/usr/sbin/pppd: bad local IP address 127.0.0.1
$
What does that means? It is only obtained with non root user.
Try
are the specifications of ALE070 and why you think you
won't be able to use it with Solaris and QNX. Can't you recompile the
software that communicates with the modem on the other Os-s on Solaris
and QNX?
--
Shaul Karl,shaul @ actcom . net . il
.
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
that it is a feature that helps to bring the remote machine up. Do post
more details if you have one.
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
then
the preformance.
What is hyper-threading and FSB from the
`P4 2.4 ghtz hyper-threading 800 mhz FSB'?
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message
.
_
Apache/1.3.27 Server at plasma-gate.weizmann.ac.il Port 80
I have sent a message about it yesterday to whom I think is the
operator, but didn't get a reply. Could be that I am impatient.
--
Shaul Karl,shaul @ actcom . net . il
certainly
expected Gentoo to lead the tests, which has not been the
case.
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
magic
0xc94d7631 pcomp accomp]
Aug 9 18:16:56 calanit pppd[2130]: sent [LCP EchoReq id=0x0 magic=0xc94d7631]
Aug 9 18:16:56 calanit pppd[2130]: sent [PAP AuthReq id=0x1 user=shaul
password=hidden]
Aug 9 18:16:57 calanit pppd[2130]: rcvd [LCP EchoRep id=0x0 magic=0xda88e375]
Aug 9 18:16:57 calanit
, removing rakefet solved the pppd problem. Any insight?
What other problems may be caused by that entry? Other then the ppp
problem it did seemed to work fine.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail
source
package and as fewer as possible patches debs. I might be wrong.
--
Shaul Karl,shaul @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run
upgrading.
In addition, msg00519.html refers to what is now a slightly older
version of that doc, but I didn't diff the two.
Wouldn't it be nice if members who follow the kernel devel would
post here similar links on similar occasions?
--
Shaul Karl,shaulk @ actcom . net . il
to see some detail
within those messages. Do note that since one way to solve the problem
is by pointing some extra or missing detail, the exact messages *might*
be important.
--
Shaul Karl,shaulk @ actcom . net . il
other.
It just rang that bell to me, and I thought to share it with you,
Boaz.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g
Please comment on anything that follows.
With kernel 2.4 I should have used iproute2 in order to get more then
one IP for one physical eth device. This is known as IP aliasing.
iproute2 is not meant to work with 2.6. Instead, etables is the tool to
use.
--
Shaul Karl,shaulk @ actcom
. The eth0:1 scenario seems to do what I
was looking for. What scenarios require the iproute2 tools? Does etables
replaces the iproute2?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED
'. There is
also the http://l7-filter.sourceforge.net/. That short page mostly says
how in debts the authors are for the lartc HOWTO. Note sure how the
l7-filter fits in. I guess I am mostly confusing different tools.
--
Shaul Karl,shaulk @ actcom . net . il
By the dates of some of the files, for example
/pub/mirrors/debian/dists/testing/main/binary-i386/Packages.gz, it looks
as if hamakor Debian mirror was last updated on Aug 30.
--
Shaul Karl,shaulk @ actcom . net . il
as it was fixed now: by updating Packages.gz. Yet then Schahar told
me about a `Disk Full' situation. Does hamakor suffer from such a
problem?
By the way, how come the time stamp of the file is 04-Sep-2003 22:19?
--
Shaul Karl,shaulk @ actcom . net . il
the
applications start using the port? The original poster mentioned
something about names. I wonder if that does the trick.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
machine opened
it for writing?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
On Fri, Sep 05, 2003 at 05:02:05PM +0300, foofoo wrote:
1. Does it have a connection to open source software?
2. What about other encodings?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL
.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
://www.shemesh.biz/
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Shaul Karl,shaulk @ actcom . net . il
having to worry about writing their own init.d scripts, and
which sysadmins can use for a slightly higher-level interface to this
module.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL
On Tue, Sep 09, 2003 at 10:47:23PM +0300, [EMAIL PROTECTED] wrote:
Shachar Shemesh wrote:
Shaul Karl wrote:
My true suggestion is to raise the problem on
[EMAIL PROTECTED]
I'll probably do that. That's actually the information I was really
looking for.
I'm not sure it's the right
are waiting around and getting
less than 1% of the testing they need.
My concern is the (large) performance regression with specjbb and
volanomark, due to increased idle time.
What are specjbb and volanomark, what gets increased idle time and
what is wrong with that?
--
Shaul Karl
of the user that does
manage to connect to this user.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
be that cheaper is not likely,
since the prices they wrote are around 425 NIS, but I hope at least to
get something that is better suited to my requirements for the same
price.
Aren't there such units made of plastic or wood, perhaps for self
construction?
--
Shaul Karl,shaulk @ actcom
tool for your disk.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
|Inet Mail
Storage System)
ALLOW=^From:[EMAIL PROTECTED]
ALLOW=^From:[EMAIL PROTECTED]
- End forwarded message -
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED
is in contradiction with RFC 2516? Is Debian wrong? I wonder what made
Debian mentions this only recently.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
bother for'.
While I am at that titled OT message, is there someone who want to
sell a used UPS for 250 NIS or less? Note that I am willing to pay 250
NIS only for a fully working UPS which has a serial cable attached. Any
other UPS will be taken for at most 125 NIS, probably less.
--
Shaul
:57 2003
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
On Sat, Sep 27, 2003 at 11:48:09AM +0300, Shaul Karl wrote:
2.3. 40 cm long drills with 8, 10 or 12 cm diameter.
Ooops, 8, 10 or 12 mm, not cm.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail
work?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
On Sun, Sep 28, 2003 at 08:42:28AM +0300, Shachar Shemesh wrote:
Shaul Karl wrote:
It seemed to work fine for two weeks or so. Not any longer.
Is there any specific reason why you are sending this to a public list
rather than to the people who maintain the mirror?
1. I believe
On Sun, Sep 28, 2003 at 12:15:42PM +0300, Shachar Shemesh wrote:
Shaul Karl wrote:
On Sun, Sep 28, 2003 at 08:42:28AM +0300, Shachar Shemesh wrote:
Shaul Karl wrote:
It seemed to work fine for two weeks or so. Not any longer.
Is there any specific reason why you are sending
On Mon, Sep 29, 2003 at 10:22:44AM +0200, [EMAIL PROTECTED] wrote:
Shaul Karl wrote:
What about /usr/share/doc/apache/examples ?
It's just an example. Not necessarily the original config file.
Perhaps you have /etc/apache/*.dpkg-dist ?
I sometimes do a find /etc -name *.dpkg
] wrote:
Shaul Karl wrote:
On Sat, Sep 27, 2003 at 07:32:41AM +0300, [EMAIL PROTECTED]
wrote:
I am connected from Debian through Actcom (PPPoE, Samsung's
blue iron ethernet ADSL modem) and don't have asyncmap 0
in my dsl-provider file.
It could be the you have it in /etc
?
firewall? Permissions in general? Anything in the log? Have you tried
to ftp localhost?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message
now have 2 archives? I believe that two are
better then one.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
. Configure the network.
4. Go to 2nd VT.
5. Mount the fs where the image resides -t nfs /mnt.
6. dd the image to your local device.
7. Mount the image on /target.
8. chroot /target.
9. Make any adjustments that are appropriate.
?
--
Shaul Karl,shaulk @ actcom . net . il
.
is there a solution?
p.s: the box is thinkpad 755cx 24mb mem, 512hd p75, network card, and an
external cdrom x6. 640x480 screen.
If there is an option to upgrade the machine I would install more RAM.
--
Shaul Karl,shaulk @ actcom . net . il
the unique and
leading role of the government in the economy in general, and in the
Linux market in particular, is of interest to this list.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED
for a
limited space installation. As for the packages to choose in dselect,
just go for the most obvious apps you want. Hopefully
Depends/Suggests/Recommends will do the rest.
[ ... ]
it was 8mb and was upgraded to 24mb.
The more the better.
--
Shaul Karl,shaulk @ actcom
and
create US address.
Then order from US cheap and pay a relative low shipping cost to Israel.
I used this service myself and it is quite good, considering that many
things are simply unavailable in Israel.
Aren't they out of business?
--
Shaul Karl,shaulk @ actcom . net . il
in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g
you mean by that?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
? A full HOWTO?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
On Mon, Oct 20, 2003 at 01:21:11PM +0200, Gil Freund wrote:
Shaul Karl wrote:
On Sun, Oct 19, 2003 at 08:02:17PM +0200, Gil Freund wrote:
I changed two ADSL connections (diffarent ISP, different cities) to
PPPoE, using the older Elcatel Soho modems. The actual connection is
from Netscreen
or Ian? Any circumstances where you prefer one name on
the other?
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
I am Ccing it to linux-il. I believe it is of general interest and
that I am not offending anyone privacy. Feel free to tell me otherwise
since the original message was sent on private.
On Tue, Oct 28, 2003 at 04:06:38PM -0800, Ian wrote:
Peace, Shaul and Shachar!
Thanks for your
.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Arbel, wrote that in general
laptops have heating problems when left running for extended period of
time.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
the schematic of the cable and post
it on this list it would be great.
--
Shaul Karl,shaulk @ actcom . net . il
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run
if it is shipped to me. No problem on my part if it will be sent
by mail. I am in Tel-Aviv.
While I am at it, I will consider any offer for real cheap (for free,
in Israeli terms) hardware. I guess that some members of this list will
be willing to pay a _bit_ more.
--
Shaul Karl,shaulk @ actcom
On Fri, Nov 21, 2003 at 10:21:25PM +0200, Official Flamer/Cabal NON-Leader wrote:
Quoth Shaul Karl:
50p50p50p50p
+--+--+--+
conconconcon
On Sat, Nov 22, 2003 at 12:18:11PM +0200, Official Flamer/Cabal NON-Leader wrote:
Hello, my children. I am finishing getting rid of much of my stuff.
Takes space, too much space. I am not a lebensraum hoarder ;-).
Junk list for trade. I am looking for EF simpler grade glass or PK or PKA
On Mon, Nov 24, 2003 at 11:38:04AM +0200, Muli Ben-Yehuda wrote:
On Mon, Nov 24, 2003 at 10:49:43AM +0200, Maxim Kovgan wrote:
On Sun, 23 Nov 2003, Noam Rathaus wrote:
hi Noam!
it is great you've brought up the subject,
and if u find more info on what exactly was there,
please post
On Mon, Dec 01, 2003 at 05:02:13PM +0200, Lesha wrote:
2.while connecting to remote station as a NIS user over SSH session and trying to
run SUDO, authentication failed.
Could be due to your pam configuration. You might try
ssh [EMAIL PROTECTED]
to bypass it.
--
If
On Mon, Dec 01, 2003 at 07:48:53PM +0200, Shimon Panfil wrote:
Hi folks,
on my machine with 2 ethernet cards different kernels see these two
cards in different order. How can I appoint specific device for specific
interface? Kernel parameters?
Perhaps by setting this in /etc/modutils?
On Mon, Dec 01, 2003 at 08:11:09PM +0200, Oded Arbel wrote:
??? 01 ? 2003, 19:48, ?? ??? Shimon Panfil:
Hi folks,
on my machine with 2 ethernet cards different kernels see these two
cards in different order. How can I appoint specific device for specific
interface? Kernel
For those who missed it, the Debian machines were hacked because of a
combination of a sniffed password and a local root exploit. The hole is
believed to be only locally exploitable, not remotely. More details on
this exploit are at
http://isec.pl/vulnerabilities/isec-0012-do_brk.txt
On Sat, Dec 06, 2003 at 03:01:03PM +0200, Ivor Terret wrote:
The modem i have is the 070 model which is supported under Linux and has
worked on RH 90.
In that case, isn't it probably a kernel matter? One line of action is
to install on the machine a similar kernel to the one that RH 9
On Sat, Dec 06, 2003 at 05:23:07PM +0200, Tzafrir Cohen wrote:
On Sat, Dec 06, 2003 at 05:02:46PM +0200, Shaul Karl wrote:
On Sat, Dec 06, 2003 at 03:01:03PM +0200, Ivor Terret wrote:
alfred:/usr/src/eciadsl-usermode-0.8 # make install
cc -ansi -pedantic -Wall -W -c -o pusb.o pusb.c
as well in order to get that piece of binary actually working?
Thanks for the help.
Ivor
Shaul Karl wrote:
On Sat, Dec 06, 2003 at 05:23:07PM +0200, Tzafrir Cohen wrote:
On Sat, Dec 06, 2003 at 05:02:46PM +0200, Shaul Karl wrote:
On Sat, Dec 06, 2003 at 03:01:03PM +0200, Ivor
On Sat, Dec 06, 2003 at 01:54:12PM +0200, [EMAIL PROTECTED] wrote:
Has anyone noticed that there's supposed to be a Linux day at Sun
on December 15th?
Any details?
I got the hint to this from http://www.ikarnews.com/
Only after you mentioned it I was looking at that page. It is only
On Mon, Dec 08, 2003 at 06:27:36PM -0200, Gabor Szabo wrote:
I have not seen it mentioned here (maybe I wasn't looking ?)
Open question
The government claims open-source software means a 60% saving. It doesn't
add up.
Basically it sais that the TCO of Open Source is higher than that
On Tue, Dec 09, 2003 at 11:07:37PM +0200, Dan Fruehauf wrote:
move to another ISP, Netvision Probably. (in short -
because they told me they can fix me a static ip and i wouldnt have to add
any $$).
I want to know if this is the case. I hope that I am not the
On Thu, Dec 11, 2003 at 12:08:12AM +0200, Dan Fruehauf wrote:
but what made me sign with netvision was the fact that they supported linux,
and some people knew their linux, ofcourse they told me that slackware is not
supported, yada yada yada.
According to my one or at most 2 short
601 - 700 of 859 matches
Mail list logo