Re: SoGo for OpenBSD?

2024-02-20 Thread Sebastian Reitenbach
On Sunday, February 18, 2024 22:28 CET, Mark wrote: > Odhiambo Washington , wrote: > > > You just need the password field. The password scheme does not matter. > > You can name the VIEW anything you want. Just make sure you use whatever > > you name it in the SOGoUserSources block in sogo.conf:

Re: SoGo for OpenBSD?

2024-02-17 Thread Sebastian Reitenbach
On Saturday, February 17, 2024 11:03 CET, Mark wrote: > Hi again everyone, Thanks for all your replies. > > I'm aware that I could install with "pkg_add sogo", I tried many times. > > My issue is its configuration. > > My mail server setup consists of; Postfix, Dovecot, Postfixadmin and Nginx

Re: SoGo for OpenBSD?

2024-02-16 Thread Sebastian Reitenbach
On Friday, February 16, 2024 21:33 CET, Omar Polo wrote: > On 2024/02/16 16:05:21 +0300, Mark wrote: > > Greetings. > > > > Is there any hero here, to explain/forward me a working tutorial (never > > found one) for installation of SoGo (for its webmail) on an OpenBSD mail > > server? > > Other

Re: GNUstep back and base in OpenBSD 7.4 ARM

2024-02-04 Thread Sebastian Reitenbach
asic GNUstep > development. > Please advise what options are available to move forward. > Also addressed to Sebastian Reitenbach. I don't have arm around, but if you could test as @sthen advised, or find another way to make it work, and provide a patch, I'm happy to take it. Sebastian > Thank you.

Re: athn0: bad ROM checksum 0x2c64

2019-02-10 Thread Sebastian Reitenbach
Am Sonntag, Februar 10, 2019 14:19 CET, Stefan Sperling schrieb: > On Sun, Feb 10, 2019 at 11:50:35AM +0100, Sebastian Reitenbach wrote: > > The non-working one shows up as AR7015 in Windows, but I don't see a AR7015 > > chipset > > mentioned in athn(4), therefore I

Re: athn0: bad ROM checksum 0x2c64

2019-02-10 Thread Sebastian Reitenbach
Hi Stefan, Am Sonntag, Februar 10, 2019 11:06 CET, Stefan Sperling schrieb: > On Sat, Feb 09, 2019 at 06:56:45PM +0100, Sebastian Reitenbach wrote: > > Hi, > > > > got a cheap TP-Link TL-WN821N, which shows up as Atheros AR7015 under > > Windows 10. > > > &

Re: athn0: bad ROM checksum 0x2c64

2019-02-09 Thread Sebastian Reitenbach
Sent from my iPhone > On 9. Feb 2019, at 18:56, Sebastian Reitenbach > wrote: > > Hi, > > got a cheap TP-Link TL-WN821N, which shows up as Atheros AR7015 under Windows > 10. > > athn0 at uhub3 port 3 configuration 1 interface 0 "ATHEROS USB WLAN" re

athn0: bad ROM checksum 0x2c64

2019-02-09 Thread Sebastian Reitenbach
Hi, got a cheap TP-Link TL-WN821N, which shows up as Atheros AR7015 under Windows 10. athn0 at uhub3 port 3 configuration 1 interface 0 "ATHEROS USB WLAN" rev 2.00/2.02 addr 5 athn0: failed loadfirmware of file athn-open-ar7010 (error 2) athn0: could not load firmware athn0 at uhub3 port 3 conf

Re: SPA112 VoIP with pf and NAT - States keeps open on address change

2019-02-06 Thread Sebastian Reitenbach
Am Mittwoch, Februar 06, 2019 10:57 CET, jum...@yahoo.de schrieb: > Hello, > I have a Cisco SPA112 VoIP to connect my analog phone to my provider SIP > system. Recently I replaced my Linux based (Fritzbox) with a OpenBSD 6.4 > firewall. The firewall is connected to a vDSL modem and performs NAT

Re: Qsynth midi latency not low enough... what to do?

2018-12-03 Thread Sebastian Reitenbach
Am Sonntag, Dezember 02, 2018 10:17 CET, Alexandre Ratchov schrieb: > On Sat, Dec 01, 2018 at 01:19:00PM -0600, Adam Thompson wrote: > > PROBLEM STATEMENT: driving FluidSynth from a MIDI controller produces > > ~1/4sec delay between keypress and sound. > > > [...] > > > Is sndio(4) suitable for

Re: Qsynth midi latency not low enough... what to do?

2018-12-01 Thread Sebastian Reitenbach
Am Samstag, Dezember 01, 2018 20:19 CET, "Adam Thompson" schrieb: > PROBLEM STATEMENT: driving FluidSynth from a MIDI controller produces ~1/4sec > delay between keypress and sound. > > NARRATIVE: > > I finally got Qsynth working under Xfce (it freezes X under twm!) so I can > control fluidsyn

detaching xnf(4) not recognized

2018-09-03 Thread Sebastian Reitenbach
Hi, I'm toying with OpenBSD 6.3 image on AWS, trying to add/remove Elastic Network Interfaces (ENI). OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP So when I attach an ENI to a running instance, then the system

Re: isakmpd and iked on the same box

2018-08-31 Thread Sebastian Reitenbach
Am Donnerstag, August 30, 2018 17:39 CEST, Philipp Buehler schrieb: > Hi, > > Am 30.08.2018 10:27 schrieb Sebastian Reitenbach: > > Hi, > > > > I'm wondering if it would be possible to add iked to my box already > > running isakmpd. > > I found this

isakmpd and iked on the same box

2018-08-30 Thread Sebastian Reitenbach
Hi, I'm wondering if it would be possible to add iked to my box already running isakmpd. I found this quite old thread: http://openbsd-archive.7691.n7.nabble.com/iked-isakmpd-on-the-same-machine-td246610.html just checking to see if things might have changed since then. Ive a vio0 interface wi

Re: connect two midi devices

2018-05-26 Thread Sebastian Reitenbach
Am Samstag, Mai 26, 2018 11:12 CEST, Alexandre Ratchov schrieb: > On Sat, May 26, 2018 at 12:10:03AM +0200, Sebastian Reitenbach wrote: > > Am Freitag, Mai 25, 2018 22:22 CEST, Alexandre Ratchov > > schrieb: > > > > > On Fri, May 25, 2018 at 10:22:26AM +02

Re: connect two midi devices

2018-05-26 Thread Sebastian Reitenbach
Sent from my iPhone > On 26. May 2018, at 11:12, Alexandre Ratchov wrote: > >> On Sat, May 26, 2018 at 12:10:03AM +0200, Sebastian Reitenbach wrote: >> Am Freitag, Mai 25, 2018 22:22 CEST, Alexandre Ratchov >> schrieb: >> >>> On Fri, May 25, 2018 at

Re: connect two midi devices

2018-05-25 Thread Sebastian Reitenbach
Am Freitag, Mai 25, 2018 22:22 CEST, Alexandre Ratchov schrieb: > On Fri, May 25, 2018 at 10:22:26AM +0200, Sebastian Reitenbach wrote: > > Hi Alexandre, > > > > Am Freitag, Mai 25, 2018 08:41 CEST, Alexandre Ratchov > > schrieb: > > > > > On Fri, M

Re: connect two midi devices

2018-05-25 Thread Sebastian Reitenbach
Hi Alexandre, Am Freitag, Mai 25, 2018 08:41 CEST, Alexandre Ratchov schrieb: > On Fri, May 25, 2018 at 12:21:18AM +0200, Alexandre Ratchov wrote: > > > > Maybe, but unlikely. If the device attaches, generally it works. Show > > what's received on midi2 when you type on the keyboard or do any ot

connect two midi devices

2018-05-24 Thread Sebastian Reitenbach
Hi, I've finally got an el cheapo USB to midi converter. I just wanted to test if I can make use of my Roland Aira gear that way, because the USB connection is not class compliant. Additionally I've two synths connected to the box: umidi0 at uhub0 port 2 configuration 1 interface 1 "Waldorf Music

Re: Watch out for bad options in /var/run/rc.d/$daemon

2017-01-04 Thread Sebastian Reitenbach
On Wednesday, January 4, 2017 08:16 CET, Antoine Jacoutot wrote: > On Tue, Jan 03, 2017 at 11:01:18PM -0700, Andy Bradford wrote: > > Hello, > > > > Since I couldn't find any reference to this anywhere, I thought I would > > put out a description of the problem in the event that someone else run

Re: OpenBSD's binutils

2016-12-05 Thread Sebastian Reitenbach
On Monday, December 5, 2016 11:05 CET, Stuart Longland wrote: > On 28/11/16 21:10, Stuart Henderson wrote: > > You are right, gcc 4.9 generates some code using opcodes that need newer gas. > > Try building the port with clang (it would also help the case where the port > > itself has asm needing

Re: IPv6 Setup not working on Hetzner server

2016-12-05 Thread Sebastian Reitenbach
On Friday, December 2, 2016 13:39 CET, Leo Unglaub wrote: > Hey, > > On 12/02/16 13:14, Reyk Floeter wrote: > > This is a link-local address, you have to specify the interface scope id: > > > > $ cat /etc/mygate > > 144.76.102.193 > > fe80::1%em0 > > thanks for the hint. I fixed this but that alo

Re: OpenBSD 6.0 amd64 Release --> pkg_add returns error when running as Virtualbox guest

2016-11-18 Thread Sebastian Reitenbach
On Thursday, November 17, 2016 18:11 CET, Andre Ruppert wrote: > Hello to the list, > > this morning I stumbled about a "pkg_add" problem when running OpenBSD > 6.0 amd64 Release on an actual Virtualbox release. Doesn't matter which > host platform (I tried Mac OS Sierra and Windows 10 and 7). >

Re: pf prio queue not setting vlan prio value?

2016-05-31 Thread Sebastian Reitenbach
On Monday, May 30, 2016 16:45 CEST, Alexey Suslikov wrote: > Sebastian Reitenbach l00-bugdead-prods.de> writes: > > > With tcpdump, I see 'pri 0' on all the packets captured: > > > > tcpdump -n -i trunk0 -vvv vlan 8 and net 10.1.0.0/24 > > 11:18:13.13

pf prio queue not setting vlan prio value?

2016-05-30 Thread Sebastian Reitenbach
Hi, I tried to get priority queueing set up to prioritize some VoIP traffic. I'm on 5.9, a carp clustered firewall. Just some testing so far, but I got a bit confused, about whether it is really doing what it is supposed to do. pf.conf(5) tells me about 'set prio': If the packet is transmitted

Re: problem with carp on 5.9, MAC address of carp interface?

2016-04-26 Thread Sebastian Reitenbach
On Monday, April 25, 2016 11:56 CEST, Martin Pieuchot wrote: > On 25/04/16(Mon) 11:35, Kim Zeitler wrote: > > Hello Martin > > > > > > On 04/25/16 11:12, Martin Pieuchot wrote: > > >On 25/04/16(Mon) 10:47, Kim Zeitler wrote: > > > > >>He is running a carp interface on top of a vlan interface. In

Re: problem with carp on 5.9, MAC address of carp interface?

2016-04-25 Thread Sebastian Reitenbach
Hi, On Monday, April 25, 2016 14:02 CEST, Kim Zeitler wrote: > Hello Martin > > before I go further - I just run a ping test with the tcpdump as you > requested and it did work. The only thing that was changed was an > upgrade from GENERIC.MP#1983 -> GENERIC.MP#1997. the only thing I did for su

Re: problem with carp on 5.9, MAC address of carp interface?

2016-04-25 Thread Sebastian Reitenbach
On Monday, April 25, 2016 11:12 CEST, Martin Pieuchot wrote: > On 25/04/16(Mon) 10:47, Kim Zeitler wrote: > > Hello Martin, hello Sebastian > > > > On 04/25/16 10:15, Martin Pieuchot wrote: > > >On 25/04/16(Mon) 09:48, Sebastian Reitenbach wrote: > > >>

problem with carp on 5.9, MAC address of carp interface?

2016-04-25 Thread Sebastian Reitenbach
Hi, I'm trying to upgrade a HA carped firewall cluster to 5.9 but run into issues. The current cluster runs old 5.2, so it's more than time to do so. I've done a couple of carp setups so far, but don't seem to get this one right. I reinstalled the backup node of the cluster with OpenBSD 5.9. I

Re: puppet and cross-platform password hashes

2016-02-09 Thread Sebastian Reitenbach
On 02/05/16 08:33, Peter N. M. Hansteen wrote: I'm assuming I'm not the first to encounter this - the scenario is a group of admins who have so far run mainly Linux and some Solaris, and who have a fairly well developed Puppet setup for maintaining among other things local users for admins to

Re: VAX - are we dropping support in 5.9?

2016-01-24 Thread Sebastian Reitenbach
On 01/24/16 00:23, Christian Weisgerber wrote: On 2016-01-23, "Bryan C. Everly" wrote: I just noticed that the VAX packages directory was missing on openbsd.cs.toronto.edu and the other mirrors I checked. I searched the MARC.info archives and didn't see anything announcing that the VAX was go

Re: Puppet and OpenBSD. Any examples/experience for unattended provisioning?

2015-06-22 Thread Sebastian Reitenbach
Am 6/21/2015 um 3:00 PM schrieb Kirill Peskov: Hi All, Looks like there is no comprehensive guide/howto in the Net for $subj... Googling gives some discussions and presentations regarding running puppet server on OpenBSD, which is not so interesting. My task is to automate provisioning of bunch

Re: Xen PV DomU with OpenBSD?

2015-02-25 Thread Sebastian Reitenbach
On Wednesday, February 25, 2015 22:17 CET, Andrew Daugherity wrote: > On Sat, Feb 21, 2015 at 3:52 PM, Raimundo Santos wrote: > > > On 21 February 2015 at 10:31, Markus Kolb wrote: > > > > > > there isn't any support for Xen PV DomU in OpenBSD, isn't it? > > > > No, there is not such suppor

Re: Alternative way to get sources, CVS slow

2015-02-21 Thread Sebastian Reitenbach
On Saturday, February 21, 2015 19:06 CET, Henrique Lengler wrote: > Hi, > > I'm trying to keep and maintain a copy of -stable source code in my system. > The problem is that I can't work with CVS. > It is too slow to download. My internet can download things at 500kb/s - > 1MB/s, > but when

Re: Crashes at boot on Xen virtual machine

2015-01-29 Thread Sebastian Reitenbach
Hi, On Thursday, January 29, 2015 13:05 CET, Clément Hertling (Wxcafé) wrote: > Hi > > I'm trying to run an OpenBSD virtual machine in Xen 4.4. > The install procedure worked fine, but when I boot the VM I get a kernel > crash. > Linux VMs on this host work perfectly fine, and as I said the

Re: ntpd.drift values?

2015-01-13 Thread Sebastian Reitenbach
On Tuesday, January 13, 2015 11:58 CET, Stuart Henderson wrote: > On 2015-01-12, Christian Weisgerber wrote: > > I'm interested in what values people have in their /var/db/ntpd.drift > > files. > > > > To prevent a deluge: Looking over my own machines, I see that most > > values are Xe-05, wi

Re: isakmpd quits out after running ipsec on CURRENT

2014-12-03 Thread Sebastian Reitenbach
I run this kernel from beginning of November: OpenBSD 5.6-current (GENERIC) #492: Fri Nov 7 10:21:36 MST 2014 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MM

Re: Libretto 70CT

2014-10-24 Thread Sebastian Reitenbach
On Thursday, October 23, 2014 22:59 CEST, Fred wrote: > Hi Sebastian, > > I've just installed -current on my Libretto 70CT - as you can see from > the output below it stoped with: > > kernel: integer divide fault trap, code=0 > > Rebooted it and disable it, schsio and softraid and it has no

Re: unbound reverse DNS problem to local stub zone

2014-09-01 Thread Sebastian Reitenbach
On Monday, September 1, 2014 17:58 CEST, Arthur Mesh wrote: > On Sun, Jul 27, 2014 at 11:20:43AM +0200, Patrik Lundin wrote: > > How is/was the reverse zone configured in nsd? I am currently trying to > > debug an issue i've seen when the stub-zone in unbound is wider ("name: > > "10.in-addr.a

Re: unbound on ~ last 2-3 snapshots - i386

2014-07-28 Thread Sebastian Reitenbach
On Monday, July 28, 2014 12:46 CEST, Stuart Henderson wrote: > On 2014-07-26, Sebastian Reitenbach wrote: > > On Saturday, July 26, 2014 10:04 CEST, Todd Zimmermann > > wrote: > > > >> Have name resolution failure after an upgrade ( rebooting into the the

Re: unbound reverse DNS problem to local stub zone

2014-07-27 Thread Sebastian Reitenbach
On Sunday, July 27, 2014 11:20 CEST, Patrik Lundin wrote: > On Sat, Jul 26, 2014 at 07:34:16PM +0200, Sebastian Reitenbach wrote: > > On Saturday, July 26, 2014 17:35 CEST, Sonic wrote: > > > > > On Sat, Jul 26, 2014 at 11:21 AM, Sonic wrote: > > > >

Re: unbound reverse DNS problem to local stub zone

2014-07-26 Thread Sebastian Reitenbach
On Saturday, July 26, 2014 17:35 CEST, Sonic wrote: > On Sat, Jul 26, 2014 at 11:21 AM, Sonic wrote: > > If you're just using a /24 as your access-control seems to indicate > > try replacing the above with (this works great for me): > > local-zone: "0.0.10.in-addr.arpa." transparent > > > > an

Re: unbound on ~ last 2-3 snapshots - i386

2014-07-26 Thread Sebastian Reitenbach
On Saturday, July 26, 2014 10:04 CEST, Todd Zimmermann wrote: > Have name resolution failure after an upgrade ( rebooting into the the > new system) on my crusty i386 server. A # kill -9 'unbound pid' plus > starting unbound from rc.d after and everything is fine. Might have > been going on fo

Re: automatic installation with site.tgz

2014-07-24 Thread Sebastian Reitenbach
On Wednesday, July 23, 2014 21:09 CEST, Peter Hessler wrote: > I just set this up on some systems at $work, and here is what I have > > ... > Set name(s) = +site* or just "site*", or "all" works for me. > Unverified sets: site55.tgz. Continue without verification = yes > ... > and you nee

Re: problem with IPSec between OpenBSD 5.5 and Cisco 2901

2014-06-18 Thread Sebastian Reitenbach
On Wednesday, June 18, 2014 15:27 CEST, Stuart Henderson wrote: > On 2014-06-18, Sebastian Reitenbach wrote: > > The only difference I see, but I'm unsure if this is OK or not, is that > > the OpenBSD box sends ENCAPSULATION_MODE = TUNNEL, and the > > Cisco bo

Re: problem with IPSec between OpenBSD 5.5 and Cisco 2901

2014-06-18 Thread Sebastian Reitenbach
On Wednesday, June 18, 2014 08:49 CEST, Remi Locherer wrote: > On Tue, Jun 17, 2014 at 05:34:27PM +0200, Sebastian Reitenbach wrote: > > Hi, > > > > I'm trying to establish an IPSec tunnel between an OpenBSD 5.5 (amd64) > > box and a Cisco 2901, the whole day

problem with IPSec between OpenBSD 5.5 and Cisco 2901

2014-06-17 Thread Sebastian Reitenbach
Hi, I'm trying to establish an IPSec tunnel between an OpenBSD 5.5 (amd64) box and a Cisco 2901, the whole day, but doesn't seem to get it to work. I think I have something wrong with the crypto transforms for phase two, since this NO_PROPOSAL_CHOSEN I get in the logs, which I think is in phase t

Re: xenocara crash with NVIDIA Quadro NVS 285 on snapshot

2014-05-29 Thread Sebastian Reitenbach
On Thursday, May 29, 2014 18:04 CEST, Philip Guenther wrote: > On Thu, May 29, 2014 at 3:35 AM, Sebastian Reitenbach < > sebas...@l00-bugdead-prods.de> wrote: > > > On Thursday, May 29, 2014 10:19 CEST, Matthieu Herrb > > wrote: > > > ... > > >

Re: xenocara crash with NVIDIA Quadro NVS 285 on snapshot

2014-05-29 Thread Sebastian Reitenbach
On Thursday, May 29, 2014 10:19 CEST, Matthieu Herrb wrote: > On 29/5/14 9:09 , Sebastian Reitenbach wrote: > > Hi, > > > > yesterday I updated my desktop from a 5.2 or 5.3, to a current snapshot, > > now to find > > the X server dying on me. See Xo

xenocara crash with NVIDIA Quadro NVS 285 on snapshot

2014-05-29 Thread Sebastian Reitenbach
Hi, yesterday I updated my desktop from a 5.2 or 5.3, to a current snapshot, now to find the X server dying on me. See Xorg.0.log, xdm.log and dmesg below. So I went back, installed a 5.5 release, where starting X just worked. Afterward again, back to the snapshot. I built, xenocara with debug

unbound reverse DNS problem to local stub zone

2014-05-17 Thread Sebastian Reitenbach
Hi, I'm new to nsd/unbound, and maybe I did something wrong, however: I run i386 snapshot, with nsd/unbound on the same host. NSD listening on port 5353 is authoritative for 1 forward zone, and two reverse zones, one IPv4 private addresses, and another IPv6 zone. The forward zone, and the revers

something fishy with portmapper on i386 snapshot?

2014-05-13 Thread Sebastian Reitenbach
Hi, I've installed a i386 soekris box (10.0.0.27, called wormhole) from current snapshot, and trying to netboot a vax and a sparc, but I guess, they don't get to the bootparamd. Here what I see from the vax (10.0.0.30), which loads the boot.mop from mopd running on the same server fine, then

Re: autoinstall on SGI Indigo

2014-03-28 Thread Sebastian Reitenbach
On Friday, March 28, 2014 21:01 CET, "Sebastian Reitenbach" wrote: > Hi, > > reading the INSTALL.sgi with regard to autoinstall, and also the manpage > I find that: > > The "filename" DHCP > parameter specifies the installer mode, e.g. "

autoinstall on SGI Indigo

2014-03-28 Thread Sebastian Reitenbach
Hi, reading the INSTALL.sgi with regard to autoinstall, and also the manpage I find that: The "filename" DHCP parameter specifies the installer mode, e.g. "auto_install". On architectures where this parameter is used for netbooting, create a symbolic link named "auto_install" pointing to the bo

Re: urtw0 wpa2 working on Lemote?

2014-02-06 Thread Sebastian Reitenbach
On Wednesday, February 5, 2014 22:15 CET, Alexey Suslikov wrote: > Sebastian Reitenbach l00-bugdead-prods.de> writes: > > Anyways, at work I specify the nwid and the wpakey like this: > > > > ifconfig urtw0 nwid MYID wpakey SECRETKEY up > > > > but

urtw0 wpa2 working on Lemote?

2014-02-05 Thread Sebastian Reitenbach
Hi, with my lemote, I tried to connect to WPA2 secured network at work. Now I'm back at home, where I can connect without issues to my unsecured network. When scanning for WLAN networks using my amd64 notebook, I usually see different dB values, but here, every network is 143 dB signal strengt

VAX donation request for package builds

2014-01-10 Thread Sebastian Reitenbach
Hi, the VAXstation for the release builds died and the last one that got used up to now for package builds is now used for the release builds. That means, there is no VAX left for "regular" package builds, and release package builds. The VAXstation used so far was a VAXstation 4000/100, somethi

Re: Kernel TCP recv / send buffer auto scaling

2013-10-18 Thread Sebastian Reitenbach
On Friday, October 18, 2013 16:53 CEST, Frederic URBAN wrote: > Hello guys, > > Since 4.9, there is a auto-scaling tcp buffer size, good functionnality > but i've a question. I'm using a pair of OpenBSD servers as squid > proxies. Our internet bandwidth is 1Gb/s so we are able to download @

Re: GCC 2.95 mention in intro(3)

2013-09-13 Thread Sebastian Reitenbach
On Friday, September 13, 2013 18:06 CEST, "Jim MacKenzie" wrote: > > -Original Message- > > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf > > Of Brett Mahar > > Sent: Thursday, September 12, 2013 9:03 PM > > To: misc@openbsd.org > > Subject: GCC 2.95 mention in

Re: Developing device driver for parallel lcd dispaly modules

2013-08-26 Thread Sebastian Reitenbach
On Monday, August 26, 2013 10:41 CEST, Denis Maros wrote: > Hi Alexander, > Yes, i'm talking about 2*20 character LCD display connected to 24 pin > parallel port on motherboard. > I've tried to access this device simply via this command: > # echo "Test" > /dev/lpt0 > ksh: cannot create /dev/lp

Re: How to Run WindowMaker and GWorkspace on OBSD 5.3

2013-05-18 Thread Sebastian Reitenbach
Hi, On Saturday, May 18, 2013 16:32 CEST, Tito Mari Francis Escaño wrote: > Good day, > I tried to install OpenBSD 5.3 64-bit on VMware Workstation 9.x and so far > it's working like a charm. > I next tried to install WindowMaker, to override the default twm, I created > an .xinitrc file on

Re: Fax -- IAXModem and hylafax

2013-04-23 Thread Sebastian Reitenbach
ot about: at work we are using multiple ATA boxes (e.g. GrandStream HandyTone 286), which just work perfectly with the faxes behind them. cheers, Sebastian > > -Original Message- > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of > Sebastian Reite

Re: faxing

2013-04-22 Thread Sebastian Reitenbach
On Monday, April 22, 2013 19:30 CEST, Peter Fraser wrote: > Several years ago I put an OpenBSD system in as a firewall and mail server at > a small charity that I volunteer at (kwaccessablility.ca) > that fixed nearly all the problems that they had with viruses, spam etc. > > Last year I talk

Re: Ethernet card not working

2013-04-11 Thread Sebastian Reitenbach
On Wednesday, April 10, 2013 23:57 CEST, Riccardo Mottola wrote: > Hi, > > I bought a new PCMCIA card for my ol' Thinkpad since I managed to break > the old one. > > This is what I see in dmesg when I insert it, but then no device shows > up in ifconfig. > > ne4 at pcmcia0 function 0 "D-L

Re: Xwindows Startup without user login

2013-04-02 Thread Sebastian Reitenbach
On Tuesday, April 2, 2013 05:02 CEST, Duncan Patton a Campbell wrote: > On Mon, 1 Apr 2013 20:54:58 -0600 > Duncan Patton a Campbell wrote: > > > > > Howdy Ryan? > > > > Thanks, this looks to be the sort of thing I'm after... hopefully I can get > > it to run on OBSD now ;) > > > > Ne

Re: KGDB with sparc as target

2013-04-01 Thread Sebastian Reitenbach
On Sunday, March 31, 2013 20:10 CEST, "Sebastian Reitenbach" wrote: > Hi, > > following man kgdb, > I tested the cable on the first serial port (on the notebook) with the > system console using cu -l /dev/tty05 -s 9600. > And it works just fine. > >

KGDB with sparc as target

2013-03-31 Thread Sebastian Reitenbach
Hi, following man kgdb, I tested the cable on the first serial port (on the notebook) with the system console using cu -l /dev/tty05 -s 9600. And it works just fine. I built a sparc Kernel with KGDB enabled: option KGDB# support for kernel gdb option KGDBDEV=0xc01

Re: An L2TP client for OpenBSD?

2013-03-02 Thread Sebastian Reitenbach
On Saturday, March 2, 2013 03:15 CET, Matt wrote: > I love the L2TP functionality of npppd! In fact, the entire setup is > elegant. It would also be great for OpenBSD to be able to function as an > L2TP client. Is there any program out there or in development that > implements the client sid

Re: PRIMERGY RX200 S2 installation problems

2012-12-03 Thread Sebastian Reitenbach
Am Montag, 03. Dezember 2012 17:57 CET, Tony Berth schrieb: > it is the current one (2012-12-02) > > OpenBSD 5.2 (RAMDISK_CD) #287: Wed Aug 1 10:19:00 MDT 2012 > > der...@i386.openbsd.org:/usr/src/sys/sys/arch/i386/compile/RAMDISK_CD but dmesg says its not so current like you think it is.

Re: HP Ethernet 1Gb 4-port 331FLR card supported?

2012-11-14 Thread Sebastian Reitenbach
On Wednesday, November 14, 2012 21:27 CET, Stuart Henderson wrote: > On 2012-11-14, Sebastian Reitenbach wrote: > > Hi, > > > > we have a HP Proliant Server Gen8, where we want to run OpenBSD on it. > > The card mentioned has to go into the FlexibleLOM port on

HP Ethernet 1Gb 4-port 331FLR card supported?

2012-11-13 Thread Sebastian Reitenbach
Hi, we have a HP Proliant Server Gen8, where we want to run OpenBSD on it. The card mentioned has to go into the FlexibleLOM port on the server, therefore there is not that much choice of a card. As far as I have seen, this card is not listed in any of the drivers, but I found that link here: ht

noisy sound output from SPARCstation 5

2012-06-09 Thread Sebastian Reitenbach
Hi, out of curiosity I connected some active PC speakers to my SS5, but so far, I was not yet successful to play something good. I made some minimal tests using an au file downloaded from here: http://www-mmsp.ece.mcgill.ca/documents/AudioFormats/AU/Samples/AFsp/M1F1-int8-AFsp.au playing this o

Re: Security Patch Announcements

2012-05-01 Thread Sebastian Reitenbach
On Tuesday, May 1, 2012 18:36 CEST, Martin SchrC6der wrote: > 2012/5/1 llemike...@aol.com : > > security-announce > > This list is not used. > > > Did I miss something? Was it announced on another list? > > This has been discussed before: Patches are not announced. But citing the 5.1 Announce E-

Re: Hardware (firewall) recommendation

2012-04-17 Thread Sebastian Reitenbach
On Tuesday, April 17, 2012 21:04 CEST, Claudio Jeker wrote: > On Tue, Apr 17, 2012 at 10:39:56AM +0200, Sebastian Reitenbach wrote: > > On Tuesday, April 17, 2012 09:35 CEST, Henning Brauer > > wrote: > > > > > * Marcin [2012-04-17 08:59]: >

Re: Compiling non-ports application from source

2012-04-17 Thread Sebastian Reitenbach
On Tuesday, April 17, 2012 12:42 CEST, Laurence Rochfort wrote: > Thank you everyone for the kind advice. > > I think I have a correct understanding of packges/ports and shall > double check if what I need isn't already there. > > I'm meant to be working right now, ahem, so I'll investigate

Re: Hardware (firewall) recommendation

2012-04-17 Thread Sebastian Reitenbach
On Tuesday, April 17, 2012 12:15 CEST, Sebastian Benoit wrote: > Henning Brauer(lists-open...@bsws.de) on 2012.04.17 11:52:49 +0200: > > > I thought about being able to power cycle the machine when it freezes > > > that hard, when it > > > may not drop into ddb. Otherwise yes, serial console

Re: Hardware (firewall) recommendation

2012-04-17 Thread Sebastian Reitenbach
On Tuesday, April 17, 2012 10:47 CEST, Henning Brauer wrote: > * Sebastian Reitenbach [2012-04-17 10:40]: > > On Tuesday, April 17, 2012 09:35 CEST, Henning Brauer > > wrote: > > > > > * Marcin [2012-04-17 08:59]: > > > > I am looking for a

Re: Hardware (firewall) recommendation

2012-04-17 Thread Sebastian Reitenbach
On Tuesday, April 17, 2012 09:35 CEST, Henning Brauer wrote: > * Marcin [2012-04-17 08:59]: > > I am looking for a hardware recommendation for a new OpenBSD based > > firewalls. So far I have been using IBM x336s, but they are slowly > > approaching end of life. > > > > What I am after: > >

Re: npppd with EAP-TLS for PPTP

2012-03-01 Thread Sebastian Reitenbach
Hi, On Thursday, March 1, 2012 11:34 CET, YASUOKA Masahiko wrote: > Hi, > > On Wed, 29 Feb 2012 12:52:40 +0100 > "Sebastian Reitenbach" wrote: > > since there is the limitation in npppd that it doesn't support multiple > > clients behind the sa

npppd with EAP-TLS for PPTP

2012-02-29 Thread Sebastian Reitenbach
Hi, since there is the limitation in npppd that it doesn't support multiple clients behind the same NAT host for IPSec/L2TP, I'm looking into using PPTP with EAP-TLS authentication. But I'm wondering, whether this is supported by npppd. The examples in the HOWTO_PIPEX_NPPPD.txt only use mschapv

Re: L2TP/IPSEC with 4.9 and Ipad - fails to complete

2012-02-11 Thread Sebastian Reitenbach
On Saturday, February 11, 2012 02:37 CET, Stuart Henderson wrote: > On 2012-02-10, Ted Wynnychenko wrote: > > I am hoping someone can point me in some sort of direction. > > I have been trying to connect an iPad (ios 5.0.1) to an openbsd 4.9 server > > using L2TP/IPSEC. > > Looks like nat is

Re: linux stronswan/xl2tpd client to IPSec/npppd

2012-01-19 Thread Sebastian Reitenbach
On Thursday, January 19, 2012 23:35 CET, YASUOKA Masahiko wrote: > > On Thu, 19 Jan 2012 14:10:03 +0100 > "Sebastian Reitenbach" wrote: > > On Thursday, January 19, 2012 02:23 CET, YASUOKA Masahiko > > wrote: > >> On Thu, 19 Jan 2012 02:14:48

Re: linux stronswan/xl2tpd client to IPSec/npppd

2012-01-19 Thread Sebastian Reitenbach
On Thursday, January 19, 2012 14:10 CET, "Sebastian Reitenbach" wrote: > On Thursday, January 19, 2012 02:23 CET, YASUOKA Masahiko > wrote: > > > Hi, > > > > On Thu, 19 Jan 2012 02:14:48 +0900 (JST) > > YASUOKA Masahiko wrote: > > >

Re: linux stronswan/xl2tpd client to IPSec/npppd

2012-01-19 Thread Sebastian Reitenbach
On Thursday, January 19, 2012 02:23 CET, YASUOKA Masahiko wrote: > Hi, > > On Thu, 19 Jan 2012 02:14:48 +0900 (JST) > YASUOKA Masahiko wrote: > > On Tue, 17 Jan 2012 11:57:07 +0100 > > "Sebastian Reitenbach" wrote: > > If you don't like this l

Re: VoIP Sophtphones

2012-01-19 Thread Sebastian Reitenbach
On Thursday, January 19, 2012 06:44 CET, Tomas Bodzar wrote: > On Wed, Jan 18, 2012 at 9:10 PM, wrote: > > pjsua from the packages works very good. I tryied to compile > > linphone-3.5.0 and twinkle-1.4.2 in OpenBSD4.8 without > > success. Did someone managed to do it? > > From http://www.o

linux stronswan/xl2tpd client to IPSec/npppd

2012-01-17 Thread Sebastian Reitenbach
Hi, This is a long story, the 2 little questions, one regarding a clarifictaion I'd like to have, and another followup question are at the end. my final goal is to connect mobile phones via IPSec/L2TP to OpenBSD vpn servers. Since I don't have a capable smart phone around, I thought about tryin

problem with ral in hopstap mode on -current

2012-01-12 Thread Sebastian Reitenbach
Hi, I ran a soekris box as AP, and recently upgraded it from a very old 4.2, to 5.0 -current. It was running the old 4.2 for such a long time, since I only had a 32MB CF card in it, and just recently bought a new 2GB card, to install a full system on it. I have a ral wireless device in the box

Re: problem with puc(4) on -current

2011-12-31 Thread Sebastian Reitenbach
Hi, On Saturday, December 31, 2011 13:13 CET, Stuart Henderson wrote: > On 2011-12-31, Sebastian Reitenbach wrote: > >> > Right now I'm running 4.6 on it, and thought, its time to upgrade, so > >> > installed -current from today ;) > .. > >> &g

Re: problem with puc(4) on -current

2011-12-31 Thread Sebastian Reitenbach
On Saturday, December 31, 2011 11:55 CET, "Sebastian Reitenbach" wrote: > On Saturday, December 31, 2011 11:47 CET, "Sebastian Reitenbach" > wrote: > > > On Saturday, December 31, 2011 10:58 CET, "Sebastian Reitenbach" > > wrote:

Re: problem with puc(4) on -current

2011-12-31 Thread Sebastian Reitenbach
On Saturday, December 31, 2011 11:47 CET, "Sebastian Reitenbach" wrote: > On Saturday, December 31, 2011 10:58 CET, "Sebastian Reitenbach" > wrote: > > > Hi, > > > > I have a Soekris box equipped with an 8 port serial card I use to manag

Re: problem with puc(4) on -current

2011-12-31 Thread Sebastian Reitenbach
On Saturday, December 31, 2011 10:58 CET, "Sebastian Reitenbach" wrote: > Hi, > > I have a Soekris box equipped with an 8 port serial card I use to manage all > my hardware using cu. > Right now I'm running 4.6 on it, and thought, its time to upgrade, so &

problem with puc(4) on -current

2011-12-31 Thread Sebastian Reitenbach
Hi, I have a Soekris box equipped with an 8 port serial card I use to manage all my hardware using cu. Right now I'm running 4.6 on it, and thought, its time to upgrade, so installed -current from today ;) Luckily I did the new installation on a separate CF card, to easily go back. When I now

strange em network speeds and auto-negotiation

2011-12-04 Thread Sebastian Reitenbach
Hi, With em0 and em1, both cards auto-negotiate GigaBit full-duplex on Linux on the same host. With OpenBSD, em0, the onboard network interface, only auto-negotiates 100MBit full duplex. Man em tells me, there are some chipsets that only make 100Mbit with OpenBSD, but this card is not in the li

Re: network tuning for high bandwith and high latency

2011-12-03 Thread Sebastian Reitenbach
Hi, On Saturday, December 3, 2011 14:24 CET, Henning Brauer wrote: > * Sebastian Reitenbach [2011-12-03 01:12]: > > Thanks to your pointers on icb, I found the autosizing algorithm at the end > > of netinet/tcp_userreg.c. > > There I saw its comparing the actual value

Re: network tuning for high bandwith and high latency

2011-12-02 Thread Sebastian Reitenbach
Hi, On Friday, December 2, 2011 19:41 CET, Henning Brauer wrote: > * Sebastian Reitenbach [2011-12-02 16:16]: > > On Friday, December 2, 2011 15:30 CET, Henning Brauer > > wrote: > > > well, you actually found the answer yourself. if your em is running at > >

Re: network tuning for high bandwith and high latency

2011-12-02 Thread Sebastian Reitenbach
On Friday, December 2, 2011 15:30 CET, Henning Brauer wrote: > * Sebastian Reitenbach [2011-12-02 15:22]: > > On Friday, December 2, 2011 15:04 CET, Kenneth R Westerback > > wrote: > > > > > On Fri, Dec 02, 2011 at 02:08:57PM +0100, Sebastia

Re: network tuning for high bandwith and high latency

2011-12-02 Thread Sebastian Reitenbach
On Friday, December 2, 2011 15:04 CET, Kenneth R Westerback wrote: > On Fri, Dec 02, 2011 at 02:08:57PM +0100, Sebastian Reitenbach wrote: > > Hi, > > > > I'm trying to tune the network speed of OpenBSD box for high bandwidht, and > > high latency. >

network tuning for high bandwith and high latency

2011-12-02 Thread Sebastian Reitenbach
Hi, I'm trying to tune the network speed of OpenBSD box for high bandwidht, and high latency. The box is connected to a 155MBit Internet uplink. Hosts I have here next to me: An old OpenBSD 4.4 box, used as server firewall, in front of a Linux http server. A new OpenBSD 5.0 box, used as http se

Re: Libretto 70CT Debugging

2011-02-19 Thread Sebastian Reitenbach
Hi, with all this libretto thread, I backed out my old Libretto 60, but I can only confirm that it also has the same problem: booting hd0a:/bsd: 8254588+118 [61+372400+358030]=0x99e480 entry point at 0x200120 [ using 730908 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991

Re: How to open PDF that requires Adobe 9

2010-12-07 Thread Sebastian Reitenbach
On Tuesday 07 December 2010 08:40:01 am Clint Pachl wrote: > Anthony Bentley wrote: > >> This happens when there are multiple PDFs embedded in a single PDF file. > >> I remember reading a Ghostscript bug about this (could probably find it > >> again if I had the exact error message), but unfortunat

  1   2   >