I tried typesetting docbook with Context, it can be done, I but got stuck on
the cals tables and some other things. Cals tables can be processed, albeit as
separate documents only - not as part of the docbook file - and then imported
as pdf files. This was too cumbersome for me, and does not
Op 3 jun 2011, om 18:28 heeft Hans Hagen het volgende geschreven:
On 3-6-2011 5:43, R. Ermers wrote:
I tried typesetting docbook with Context, it can be done, I but got stuck on
the cals tables and some other things. Cals tables can be processed, albeit
as separate documents only
Op 4 jun 2011, om 11:06 heeft Hans Hagen het volgende geschreven:
On 4-6-2011 10:21, R. Ermers wrote:
Adding the prefix cals: to the tag names (thus making the file invalid,
which is contrary to the docbook philosophy), using the cals table module
and the directives is not enough
Op 4 jun 2011, om 14:24 heeft Aditya Mahajan het volgende geschreven:
On Jun 4, 2011, at 5:06 AM, Hans Hagen pra...@wxs.nl wrote:
On 4-6-2011 10:21, R. Ermers wrote:
Adding the prefix cals: to the tag names (thus making the file invalid,
which is contrary to the docbook philosophy
Dear all,
After my update a few days ago I have run into the problem earlier described
under the subject new beta (Marco Pessotto). The file processed nicely until
then. I use gentium as the main font.
\definefont[gentium][Xserif][name:Gentium at 12pt]
See more details underneath.
I am right
.
Regards,
Robert
+++
\enableregime[utf]
\setuppapersize[A4][A4]
\startsectionblockenvironment[bodypart]
\setupheader[text][location=text,state=high,strut=yes,after=\vskip-0.8em\thinrule]
\setupfootertexts[{\tfx \copyright R. Ermers}][][][{\tfx \copyright R. Ermers}]
\setuppagenumber[number=1
Thanks for all advices!
I solved the problem, at least partially.
I now use \usetypescriptfile[type-gentium]
For some reason I have to change the signs in the unnumbered lists.
My one and only math item -- $\frac1{40}$ -- does cause a problem though.
Apparently there is no math fallback.
Any
Thanks all, for your reactions.
I tried them all, but the process still stops at the \frac, which I changed now
into \frac{1}{40}, whatever I do.
The gentium font does not load properly; the file is typeset in Times instead.
I get these strange references to gentium instead.
Regards,
Robert
Dear All,
In the mean time my general font problem subsists.
It seems that the gentium font is not loaded at all (see snippet from log
file). I use the regular standalone installation, I have not changed anything.
I use the standard typescript file.
Note that my file processed normally,
het volgende geschreven:
On Wed, Sep 28, 2011 at 10:58 AM, R. Ermers r.erm...@hccnet.nl wrote:
Dear All,
In the mean time my general font problem subsists.
It seems that the gentium font is not loaded at all (see snippet from log
file). I use the regular standalone installation, I have
See attached sample files. I tried them, and got a correct pdf.
Regards,
Robert?xml version=1.0 encoding=ISO-8859-1 standalone=yes?
start
ref name=contacts/
/start
define name=contacts
element name=contacts
zeroOrMore
choice
ref name=contacts.contact/
ref name=contacts.contactgroup/
ref
Dear Friends,
I am trying to generate a simple flow chart. Does anybody have a complete
working sample file, as simple as possible, that I could use as a starting
point?
Thanks in advance.
Robert
___
ntg-context mailing list
ntg-context@ntg.nl
Thanks Wolfgang,
That's exactly what I needed!
Robert
Op Za, 23 september, 2006 1:50 pm schreef Wolfgang Schuster:
On Sat, 23 Sep 2006 12:55:04 +0200 (CEST)
[EMAIL PROTECTED] wrote:
Dear Friends,
I am trying to generate a simple flow chart. Does anybody have a
complete working sample file,
Hi,
I am preparing a document in xml docbook. The general output with
Context is fine.
However, in my main text (Dutch) I use some Turkish as well. Next to the
xml-editor, I use Textpad, whose unicode support is not optimal, so for
the time being I save the file in iso 8859-9. This encoding
Dear Friends,
I am having problems with Context under Miktex.
The document is processed, but nothing happens.
Instead a tmp file is created, which says the following:
terminologie-Diwan.003.tmp
% terminologie-Diwan.003.top
\unprotect
\setupsystem[\c!n=1,\c!m=1]
Thanks Hans, for your quick reply.
My MikTeX installation contains a natural.tcx file.
I am afraid that I do not quite grasp the rest of your reply. What do you
suggest me to do?
Kind regards,
Robert
Op Ma, 27 november, 2006 12:04 pm schreef Hans Hagen:
R. Ermers wrote:
Dear Friends,
I
Thank you Hans, for your quick reply.
I have a file natural.tcx in tex/texmf/web2c/natural.tcx.
I do not quite understand the rest of your reply. What do you suggest me
to do?
I am using Miktex 2.4.1461.
Regards,
Robert
Op Ma, 27 november, 2006 12:04 pm schreef Hans Hagen:
R. Ermers wrote
I updated to miktex 2.5, which solved the problem with txc. Everything
works fine now.
Regards,
Robert
___
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
Dear Friends,
For about a year and a half I have been using Taco's macro for theorems.
I use it in the following way:
\startCasus[casus-166][Title: my title]
text text text
\stopCasus
The result ought to be:
Casus 1. Title: my title
The macro has been working fine, but recently it does not
Thanks Aditya for your suggestion.
The problem is that I already have about 200 separate documents in this
format:
\startCasus[casus-166][Title: my title]
Text
\stopcasus
Does anyone have an other idea?
Regards,
Robert
Op Za, 3 maart, 2007 7:37 pm schreef Aditya Mahajan:
On Sat, 3 Mar
Hi there,
Thanks for all suggestions.
Based on the message that the file processed normally, I thought I had to
update to a the most recent version of Context.
This entailed downloading a large set of new lm fonts.
Now the files process normally, apart from the \dots command...
Regards,
Hi all,
While my other files process normally, others don't anymore.
Find relevant snippets from the log file below.
The problem begins arising here:
(D:\tex\texmf\tex\context\base\spec-fdf.tex
! Undefined control sequence.
l.3282 \loadmarkfile{spec-fdf}
Does anyone have a solution?
Kind
Dear All,
I still have a large problem with the newest context update which is
incompatible with the latest MikTeX installation. Many files are not
regularly processed anymore.
Does anybody have any suggestions as to how to clean up the right
Context files and reinstall an older version?
I
Thanks Taco,
I updated with the command ctxtools --updatecontext. I know where to
find the old versions, but I don't know which files of the new
distribution I need to remove. Or should I simply remove all context
directories, install a less recent context version (from the zip-file)
and
Dear All,
After having had a great deal of problems when submitting my context
files to my publisher, I decided to write future projects in docbook
(V4.4), rather than switching to Word or Open Office. From the docbook
files I then can generate an rtf or wml file which is much more of use
for
Well, you know: the publisher preferred a word document or rtf; he was
quite puzzled by the Context codes.
I then had to convert the text to xml, which he was more acostumed to.
Robert
luigi scarso schreef:
On 6/4/07, R. Ermers [EMAIL PROTECTED] wrote:
Dear All,
After having had
Dear All,
Has anybody found time to dive into the docbook-Context problem?
The problem is that all section headings dissappear when in a given
docbook section a table is placed. (Of course the document is validated
against the dtd.)
I am really puzzled by it, and it prevents me from using
the
Context output.
I understand the mappings, but the Cals table mappings are more
complicated. (This is also explained by Simon Pepping
http://www.ntg.nl/maps/pdf/29_7.pdf)
Perhaps this bug arose in a recent version of Context?
Robert
luigi scarso schreef:
On 6/7/07, R. Ermers [EMAIL PROTECTED
Thanks Taco,
I have of course thought of that, and I know it must work, but in the way I
intend to set up the document, especially in regard to the connections between
the blocks (item A' = translation of item A), it would be handy if it could be
done around each item.
If not, I'll have to
Hi Olivier,
Thanks for your reaction. My original proposal was:
\startitemize
\beginblockA
\item Apple
\endblockA
\beginblockB
\item Pomme
\endBlockB
\beginblockA
\item Pear
\endblockA
\beginblockB
\item Poire
\endBlockB
\stopitemize
This does not work.
The
It just happened to be in my Miktex system. It was wrong in the sense that it
was outdated, but may be still working for Latex. My earlier version of Context
worked normally with it. The new version almost did.
This is one of the reasons I tend to postpone updates.
Robert
Rob Ermers wrote:
Hello Adam,
Why not save the document as cont.au-de.bst and use it when you write
German. When you need the English version, you simply switch back to
cont.au.bst?
The adaptations in the bst file are not many, unless you want to change
the commas and periods as well.
The only serious problem I
Hi Taco and Upendran,
Thanks a lot for your kind help.
I'm elsewhere now, so I will only be able to try this evening.
Thanks again.
Robert
Op Ma, 3 oktober, 2005 3:32 pm schreef piskala upendran:
hi ermers,
I am attaching afile for your help in updating the
miktex.ini. hope this will be
Hi Jessica,
Try this:
\usemodule[m][letter]
or
\usemodule[m-letter]
I had a similar problem some time ago. It seems that a plainTeX document
named 'letter.tex' is loaded in lieu of m-letter.tex. It is against
Contex-philosophy to explicitly state the prefixes, but it may be needed
now and again.
Hi all,
I have a document in Dutch (\mainlanguage[nl]) in which I quote Turkish
items, which I want to collect in a separate index, like this:
Enkele voorbeelden zijn: \quote{oudere zus} \turkish{abla},
\quote{jongere broer of zus} \turkish{karde\c{s}}, de \quote{zus van
vader}
Dear friends,
I have been trying again to get Arabtex running. I got the most recent
version of apatch.sty etc. There are some problems.
Question 1. context gets stuck
When using Arabtex with Context (which I prefer now), the run stops on a
command in apatch, \hc, referring to hepatch.
Thanks Hans, for your quick reply.
I downloaded the most recent files (again) from Lagally's website, since
I don't have the texlive cd (may be I should). The most recent
apatch.sty bear dates in 2006.
I commented line 191 in apatch.sty. Everything seems to work normal now.
Perhaps until I
Hans and other contexers,
Again on Arabtex, a real challenge.
2. The problem with the questionmark remains unsolved, I am afraid.
3. There is also a problem with \rq (closing quotation marks). The
result is expected to be abc, however it is abc'
When combined with , needed to put a sukun,
Dear all,
I have problems with the placement of floats. I need them to be placed in the
outer edge of the text, but Context puts them in the middle of the page. The
outer, inner, outeredge, inneredge, commands do not work. Right and left do
work.
Preferably the criterium option should also
Dear all,
Does anyone know what causes this problem? Is it a bug?
Regards,
Robert
Op 30 aug. 2013, om 19:08 heeft R. Ermers het volgende geschreven:
Dear all,
I have problems with the placement of floats. I need them to be placed in the
outer edge of the text, but Context puts them
Dear all,
I have problems with the placement of floats. I need them to be placed in the
outer edge of the text, but Context puts them in the middle of the page. The
outer, inner, outeredge, inneredge, commands do not work. Right and left do
work.
Preferably the criterium option should also
Dear all,
I have problems with the placement of floats. I need them to be placed in the
outer edge of the text, but Context puts them in the middle of the page. The
outer, inner, outeredge, inneredge, commands do not work. Right and left do
work.
Preferably the criterium option should also
some time, but my deadline is approaching.
Thanks again!
Kind regards,
Robert
Op 10 sep. 2013, om 09:59 heeft Marco Patzer het volgende geschreven:
On 2013–09–10 R. Ermers wrote:
I have problems with the placement of floats. I need them to be
placed in the outer edge of the text
heeft Jörg Hagmann het volgende geschreven:
Maybe what I did helps: see Figures III on
http://wiki.contextgarden.net/Biochemistry_textbook. Although I used
mkII at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does
at the time.
Cheers, Jörg
R. Ermers writes:
Hi Marco,
Thank you very much indeed for your reply. This topic apparently does not
interest many people.
In your suggestion the figures are put in the outer margin in a vertical
row below one another close to the top of the page
heeft R. Ermers het volgende geschreven:
Hi,
Does anyone know if positioning figures protruding into the outer margin can
be done in mkiv?
Regards,
Robert
Hi Jörg and Marco,
Thanks for your replies.
I have tried the chemistry textbook examples too, especially vignette seems
Okee, Thanks!
Robert
Op 17 sep. 2013, om 17:28 heeft Hans Hagen het volgende geschreven:
On 9/14/2013 7:25 AM, R. Ermers wrote:
Hi Contexters,
Does anyone know whether it is possible in mkiv to position figures
protruding in the outer margin?
In mkii it used to work
there is a check
If your acquaintance actually needs an accurate translation into Russian, I
wonder why he would choose Google Translate for that. Remember that Russian has
7 cases, and a complex verbal system with many different forms, all of which
need to be deduced by Google from the much poorer English
Off topic: Well, I speak Russian and some other languages. Yes you are right,
the 5th case is the locative (after o), the 6th case is the instrumental. One
does not count the cases everyday :-)
It is not a language in general that is difficult, but the pair a language is
in: the pair
Still off topic:
Well, this is partly lexicological knowledge and research on translation. Each
language pair and translation direction has its peculiar problems.
Whether or not you are able to say it is pure speculation depends on how
familiar you are with computer linguistics, and its
Dear All,
I am processing a docbook xml file, which works great (thanks to Wolfgang's
introduction to TEI).
I have some images and I want the text before and after them to wrap around.
This can be achieved through the command \starthangaround .. \stoparound.
Since the text that is to wrap
Dear All,
I am struggling with the processing of cals tables in mkiv. I used the module
x-cals, in different styles ([x][cals], etc.) but there is no effect, the table
is not typeset.
\usemodule x-cals.mkiv
\xmlloaddirectives x-cals-test.cdx
By way of experiment I also used the directives,
:
On 7-3-2011 12:26, R. Ermers wrote:
Dear All,
I am struggling with the processing of cals tables in mkiv. I used the
module x-cals, in different styles ([x][cals], etc.) but there is no effect,
the table is not typeset.
\usemodule x-cals.mkiv
funny syntax
\usemodule[cals
Hans Hagen het volgende geschreven:
On 7-3-2011 12:26, R. Ermers wrote:
Dear All,
I am struggling with the processing of cals tables in mkiv. I used the
module x-cals, in different styles ([x][cals], etc.) but there is no
effect, the table is not typeset.
\usemodule x-cals.mkiv
funny
Dear ConTeXers,
I still have not been able to find out how to proceed with my docbook xml
document, which contains a number of cals tables.
The cals module is loaded by means of \usemodule[cals].
How to proceed from here?
Any clue is appreciated!
Regards,
Robert
On 7-3-2011 12:26, R
eta-0.65.0-2010121316mkiv lua stats : control sequences - 29719 of 165536mkiv lua stats : current memory usage - 41 MB (ctx: 42 MB)Op 9 mrt 2011, om 14:30 heeft Hans Hagen het volgende geschreven:On 8-3-2011 9:00, R. Ermers wrote:Dear ConTeXers,I still have not been able to find out how to proceed with
with ConTeXt?
Regards,
Robert
P.S. I use a minimal installation on Mac OS X 10.6.
Op 11 mrt 2011, om 09:35 heeft R. Ermers het volgende geschreven:
Dear contexers,
I get the impression that cals tables need to be processed separately from
the main docbook file.
Instead of table
Dear All,
I am still trying to typeset cals tables.
I have
1. an environment document with instructions.
2. an xml docbook file containing cals tables
Note that the original cals tables (docbook standard) use table, tgroup, etc.
but for ConTeXt purposes this - as far as I understand - needs
18 mrt 2011, om 05:08 heeft Aditya Mahajan het volgende geschreven:
On Thu, 17 Mar 2011, R. Ermers wrote:
Dear All,
I am still trying to typeset cals tables.
I have
1. an environment document with instructions.
2. an xml docbook file containing cals tables
Note that the original cals
Dear All,
After having succeeded with Aditya's kind help to typeset a table file in a
separate pdf, I have been trying to typeset the cals tables in my docbook xml
file in two ways:
A. directly in the document.
The table is in //section/cals:table.
The cals module is loaded at the beginning
Dear All,
My xml docbook file contains a number of graphics. Some are regular figures,
some are edgefigures. I have two questions in this respect.
A. referring to floats
\placeedgefigure
[\xmlatt{#1}{id}]
{\xmlfirst{#1}{/caption}}
geschreven:
On Sun, 20 Mar 2011, R. Ermers wrote:
Dear All,
My xml docbook file contains a number of graphics. Some are regular figures,
some are edgefigures. I have two questions in this respect.
Understanding these snippets is difficult without a minimal working example.
A. referring
Thanks very much, Aditya for your advice. I really appreciate it.
I tried your suggestions.
On Mon, 21 Mar 2011, R. Ermers wrote:
Thanks, Aditya, The first problem is adequately solved by adding []. I'll
prepare an example for the second problem.
A related problem is referring
Well, that seems like a great idea. But beware: as far as I know it is
impossible with context to process cals tables in an html or xml document. It
is possible though to process cals tables in a separate document and insert the
resulting pdf.
Regards,
Robert
Op 30 mrt 2011, om 19:32
Dear All,
In my docbook xml document I have fragments that I want to typeset indented.
For this I use the tag blockquote which I map to startnarrower and
stopnarrower.
Some blockquotes in my document have a header:
blockquote
titleHow a cow catches a rabbit/title
paraText Text/para
.
The same error persists.
Regards,
Robert
Op 6 mei 2011, om 12:10 heeft Wolfgang Schuster het volgende geschreven:
Am 06.05.2011 um 12:00 schrieb R. Ermers:
Dear All,
In my docbook xml document I have fragments that I want to typeset indented.
For this I use the tag blockquote which I map
Dear All,
I am working on a docbook file that includes fragments in Arabic, e.g.:
foreignphrase lang=arأشهد الا اله الا الله و ان محمدا رسول
الله/foreignphrase
These can be found by means of the lpath code:
\xmlsetsetup{#1}{foreignphrase[@lang='ar']}{xml:foreignphrase:arabic}
Now I am not
Dear all,
I have some fragments of Arabic in my dutch context document (mkiv). I tried
the environment ara-sty on the wiki, but Context halts at
\setcharactermirroring[1]
Then I found in an e-mail on the internet the suggestion to give up on
setcharactermirroring and use instead these
Dear friends,
First of all, I would like to wish all of you a
happy new year!
The update of the most recent Contextpackage
(04.2.1.) + subsequent installation with Miktex (MiKTeX 2.1) does not work out
on my system (Win 98). Miktex does not complete the installation of the context
en and
Dear Friends,
In the mean time I have also updated miktex. Now
everything seems to work fine.
Sorry for bothering you.
Robert Ermers
HiContext users,
A number of flaws in the ArabicTeX support for
ConteXt (working under Miktex) have kept me from migrating to Context thus far.
Iguess I am not the only one. I sincerely hope that they can be
fixed!
Kind regards.
Robert Ermers
cont-ar-text.dvi
Description: Binary data
the picture in the
logo definition ...
Success!
Kind regards Willi
R. Ermers wrote:
Hi contexers,
I am trying to make context do what I want. What I needed this weekend,
are
address labels, which I want to fill with my own logo (not the
addresse's).
Making one label is no problem, but I rather
Dear Contex'ers,
Does anyone know how I can prevent the occurrence
of a pagebreak after:
\section, \subsection, ...
(followed by \startitemize)
\head (in an itemization)
I do not want to have to check all the section
headings and put \page[no] before the heading.
Kind regards,
Robert
HiContex'ers,
As we are considering itemize, does anyone by any
chance know how to tackle this problem?
Kind regards,
Robert Ermers
As you know, the itemize blok can be stopped and
resumed by means of [continue]:
\startitemize[n]
\item abc
\item def
\stopitemize
bla bla
Hi Contexers,
Does anyone know why I lose all my references to
sections (\in[abc]) and pages (\at[abc]) when I specify a smaller page
arrangement, e.g. 2*2?
Kind regards,
Robert Ermers
Thank you Vit Zika for answering my question.
Robert
I am puzzled by an uppercase problem with Bibtex.
My bib file has the following entry:
@UNPUBLISHED{jansen2002,
author=Jansen, Arnold Hendrik, title =Eetgewoonten bij Europeanen en
Amerikanen,
year =2002, }
Note the uppercase
Dear friends,
Does anybody know how to generate references of the type:
Jansen (2002:22), Pietersen (1998:28,39) and Hendriks (2000:12-19) maintain
that ... while the latter (2000:21) ...
In the document I found nothing to this respect, but perhaps I overlooked.
Kind regards
Robert Ermers
Dear Contexers,
I'm logging in through webmail, so right now I cannot try your suggestions but
I will as soon as I get home. I already thank everybody for responding.
I am puzzled by this line which Hans wrote:
\definetypeface[johanna][rm][serif][palatino][default]
Hans further writes that
Dear friends,
I ran the tests exactly as you suggested. There is something wrong with a tmf
font but I don't understand the message.
I also looked in the file cont-sys.tex and added the line
\autoloadmapfilestrue. It does not make any difference.
Attached the test file and the log file.
Thanks everybody.
I think we have come close to a solution...
I used the batch file Willy advised me. (Afm2tfm is interrupted, when called
through texfont; I don't know why. Everything seems to work normally though.)
It generates a lot of font files in a batch. Very handy, I must say!
After
Hi Patrick,
Well, what I wanted is to install and use a new font called Hudson. It is a
font that consists of just one file (hudson.pdf + hudson.afm).
I installed Hudson with texfont, but I got a serious error message. Apparently
I need a line like this in my file:
Mojca,
In reply to your question:
I don't really understand how accented characters are typeset in
(Con)TeX(t). One of the main reasons for switching to LaTeX (maybe 8
years ago) someone mentioned was: You don't have to worry about accented
characters. You can make any accented character and
Thank you Thomas and Wolfgang,
About startletter / starttext: the contents of my test file reflect a moment. I
have made numerous tests with and without starttext/stoptext. The state of the
test file is one in an endless row of tests.
I am not without total experience in programing. I more or
Dear Contex’ers,This morning I have been experimenting with the solutions suggested by Thomas and Wolfgang.Thomas’ solution works, it produces two distinct letters, yet the address is probably on another layer. This means that it is not shifted to the right, at least not with the command
Dear Pablo,
Thank you for your insightful remarks. I tried your suggestions. As you
predicted, the Knuth tex is processed when put here, without using the buffer
mechanism.
\startsetups[letter:section:content]
\input knuth \relax
\stopsetups
Yet any codes (\TeX\) are not.
Nevertheless, I
Dear Contex’ers,I still desperately need your help. I would like to use Context mkiv for compiling serial letters with an xml database of addresses. I used to do this in mkii.The problem may seem trivial to experienced programmers like yourselves, but yes, I am stuck.I have several mkiv manuals, I
Hi Thomas,
Thanks for your new suggestions.
As a matter of fact, I yesterday found the following suggestion
(http://wiki.contextgarden.net/Layers):
\definelayer[AddressBg] [location={right,top}, y=6cm, x=12cm, color=red,
style=\ss\tfa].
I used this in the sample suggested by you
Your suggestion with foregroundstyle and foregroundcolor works. Thank you!
\setlayer[AddressBg]
{\framed[width=55mm,height=30mm,
align=right,background=color,
backgroundcolor=lightgray,
foregroundcolor=red,foregroundstyle=\ss\tfa]{\xmlall{#1}{/address}}}
My question (my ’need’) was quite
Dear Contex’ers,I use Context for many things. One of them is letters.I have used the letter module of mkii with an xml database (see example), but now I would like to step forward to mkiv.I have found out how to process the xml data from an xml file (now in the buffer). The recipient’s address
Dear Contex’ers,I have used the letter module of mkii for serial letters with an xml database (see example), but now I would like to step forward to mkiv.I have found out how to process the xml data from an xml file (now in the buffer). The recipient’s address neatly shows up in the designed
Dear Contex’ers,I have used the letter module of mkii for serial letters with an xml database (see example), but now I would like to step forward to mkiv.I have found out how to process the xml data from an xml file (now in the buffer). The recipient’s address neatly shows up in the designed
Thanks Wolfgang and Thomas,
The solutions of both of you function!
Thank you!
Robert
> Op 1 aug. 2017, om 13:17 heeft Schmitz Thomas A.
> het volgende geschreven:
>
>
>> On 1. Aug 2017, at 12:15, r.erm...@hccnet.nl wrote:
>>
>> While understanding what it
The problem is that I am not a programmer: I do not know where to start …
Robert
> Op 13 jun. 2017, om 10:31 heeft Thomas A. Schmitz
> het volgende geschreven:
>
>
>> On 13. Jun 2017, at 09:53, luigi scarso wrote:
>>
>>> Yet there is no
I can take the information out of the nodes. The main problem is to use them in
a layout and in a sequences other the one they appear in the xml data file.
In the current (mkii) file I have something like this:
\midaligned{\XMLflush{formalname}, \XMLflush{informalname}}.
Another point on my
I still cannot generate letters from my xml database, although there is
apparently a solution to use csv files through lua code
(https://tex.stackexchange.com/questions/72735/how-to-create-form-letters-from-spreadsheet-data-in-context
Hi Thomas,
Thanks for your advice.
I would like to have a system with which I can send letters to people in my
database.
It would be nice to be able to make selections according to labels (probably
with xmlatt), but that can be done later.
I am not a programmer - when I read the
Dear Context’ers,
I am trying to use the letter module in mkiv for typesetting serial letters
from an xml database.
Thanks, Thomas for looking into this. I appreciate it very much. Yet I don’t
know either whether I actually need the letter module, but it seemed reasonable
to try this first.
Hello all,
I have been using Context mkii with the x-corres.mkii module for a number of
years now, for many different purposes (mailings, certificates, etc). The
module works with an xml (actually rng) file with the following structure:
Janssen
Piet
I recently finished a book project in multimarkdown, which I converted to LaTeX
(I could not use ConTeXt because of its limited bibliographical functions in
comparison to BibLatex).
It worked fine. If I remember correctly, I preferred multimarkdown over
markdown for more possibilities
Dear Contexters,
Since yesterday I have a font-problem. Until yesterday this would work
perfectly:
\usemodule[simplefonts][size=10pt] %voor mkiv
\setmainfont[dejavuserif] %voor simplefonts
The system fonts worked too. Yesterday I wanted to make a presentation with
simpleslides. The fonts did
1 - 100 of 114 matches
Mail list logo