ons 2006-02-08 klockan 11:41 +1100 skrev Alistair Popple:
Hi,
I have got a Powerware 5110 UPS which has a usb interface on it. I
have downloaded and compiled nut-2.0.3-pre2 with the usb drivers
enabled on RedHat Enterprise V3 however I have been unable to get nut
to connect to the UPS. I
Hi,
tor 2006-02-23 klockan 07:09 -0600 skrev Gregory Gulik:
That's exactly what I'm doing.
Upsd still can't seem to communicate with the tripplite_usb driver.
It's saying the file is not found.
Here's what strace is showing:
socket(PF_FILE, SOCK_STREAM, 0) = 5
connect(5,
Hi Ken.
The 9120 is talking bcmxcp. So you should run the bcmxcp driver.
If you have a usb connector on the ups, try the bcmxcp_usb driver.
One problem with the bcmxcp_usb driver is that in the current state it
does not set the ups to 'request only mode', but the serial bcmxcp driver does
it.
[EMAIL PROTECTED]
To: nut-upsuser@lists.alioth.debian.org
Sent: Monday, April 10, 2006 4:18 PM
Subject: Re: [Nut-upsuser] Powerware 9120 serial connection via USB/serialdongle
--- Kjell Claesson [EMAIL PROTECTED] wrote:
The 9120 is talking bcmxcp. So you should run the
bcmxcp driver.
Forgot
, if there was any problems
starting it up on the usb driver.
Regards
Kjell
- Original Message -
From: Ken Yee [EMAIL PROTECTED]
To: nut-upsuser@lists.alioth.debian.org
Sent: Monday, April 10, 2006 7:28 PM
Subject: Re: [Nut-upsuser] Powerware 9120 serial connection viaUSB/serialdongle
--- Kjell
Hi all,
To Arnaud. Yes the 5115 is talking bcmxcp but it is not working with the
bcmxcp_usb driver. I got some help from a Australian guy to test this.
But it look's like the first try of usb from powerware was flaky.
Even the windows driver loses contact to the ups.
It is usb ver1.1 so i made a
Hi,
There is a slight difference between the bcmxcp_usb driver and this
ups.
If you look at the descriptor it tell you that the protocol is reported on
the interface level. The interface level say HID device.
If you look at the bcmxcp_usb driver it say vendor protocol on
the interface level.
So
Hi Ken,
Can you remove the lines and do a test?
I'm about to remove this, but would like to know
if the driver works with your ups.
Kjell
sön 2006-04-16 klockan 06:24 -0700 skrev Ken Yee:
--- Kjell Claesson [EMAIL PROTECTED] wrote:
It check the iManufacturer and iProduct code
Hi John.
Yes this is a small glitch in the code.
The iproduct an imanufacturer code i different on all
powerware usb ups. So you have to remove this test.
Open the file 'nut_usb.c' in the drivers directory.
Go down to around line 63 it looks like this.
Hello Michelle.
ons 2006-06-07 klockan 13:57 -0700 skrev Michelle Franz:
Hello all,
I'm using Nut quite happily with my Powerware 9125 and 9115 UPSs. I'd
like to delay restoring power to the computers after a loss of power
shutdown until a reasonable battery charge has been restored, to
Hi Gary,
tor 2006-06-08 klockan 13:54 +1000 skrev Gary and Jane Pearce:
Thank you Kjell,
The permissions scripts (hotplug-ng) are missing from the SuSE 10.1
distribution. In the end I downloaded the sources to get the script I needed
then discovered your solution of adding the following
mån 2006-07-24 klockan 15:06 +0300 skrev Omry Yadan:
Hi List,
Hi Omry,
I just got myself a new everpower-1000va.
according to the compatibility list, the 'safenet' driver supposed to
support it,
however, when I try, I get this in syslog:
Jul 24 15:05:22 tv upsd[26458]: Can't
Hi
tis 2006-07-25 klockan 13:49 -0500 skrev John H.:
is there 3110us support yet?
No, not for the usb. But it does not do any more on usb then on
the generic contact driver. There is no voltage or current or
battery data, just indication that it is OL or OB.
To support 3110 and the 5115 on
Follow up
ons 2006-07-26 klockan 01:07 -0500 skrev John H.:
is generic driver only for serial?
BTW it may be run on a usb to serial dongle. But I'm not
sure about that. Maybe we have someone on the list that have
tested the generic driver on this gadgets.
Regards
Kjell
Hi Tom,
tor 2006-07-27 klockan 21:49 -0400 skrev Tom Diehl:
Outstanding!! Your instructions got it working for me.
Thank You.
Nice that it get you going.
One more question, I have the card in the ups for monitoring the ambient
temperature and humidity. Should upsc be able to display
Hi John,
tis 2006-08-01 klockan 00:22 +1000 skrev John Murphy:
Help please on Powerware 3105 serial (aka SOLA 305 here in Australia).
Is it best configured as a contact-closure device or do I try and
persist to get bcmxcp to work - which it won't so far?
Running on SUSE 10.1
Thanks,
This is
tis 2006-08-01 klockan 09:11 -0400 skrev Barry Fawthrop:
/lib/nut/newhidups -DD -u root -x vendorid=09df auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
Here you state 09df as vendorID.
debug level is '2'
Checking device (0D9F/0001) (001/003)
- VendorID: 0d9f
- ProductID:
Ok
tor 2006-08-03 klockan 11:29 +0200 skrev Daniel Haas:
8--snip-
Looks like you have to check your upsmon.conf. You should be
monitoring [EMAIL PROTECTED] not smnp. Also check the ACl in
upsd.conf if you run the monitor on another computer then the
upsd.
Sorry. I sent you
tor 2006-08-03 klockan 09:51 +0200 skrev Daniel Haas:
Hi NUT-Users,
Hi Daniel,
we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This
card supports the RFC1628 Definition.
So I think this combination work together with NUT and the snmp-driver,
correct?
I installed
Hi Alexander,
sön 2006-08-06 klockan 14:36 +0400 skrev Alexander Zubkov:
I've updated to 2.0.4 and changed driver to megatec. It is working too.
Old info, showed by fentonups:
battery.charge: 100.0
battery.voltage: 28.0
driver.name: fentonups
driver.parameter.port: /dev/ttyS0
mån 2006-08-07 klockan 00:22 +0400 skrev Alexander Zubkov:
Kjell Claesson wrote:
Thanks for the info. I change the driver to megatec for the RealSmart
1000 and 800 in the driver.list.
Hi.
I've checked PowerMan BackPro Plus 1000 with genericups type=4.
OL, OB and LB are showed
Hi Rich,
sön 2006-08-13 klockan 19:16 -0500 skrev Rich Osman:
I'll read TFM, but I can't find it.
My nut install is working fine now that Kjell pointed out my case error
and I finished configging it. The only problem that remains is that the
serial port mode and ownership gets reset on
tis 2006-08-15 klockan 15:32 -0500 skrev Matt Brei:
Updated to 2.1.0 and I get the same thing.
Network UPS Tools - UPS driver controller 2.1.0
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.1.0)
No matching HID UPS found
Driver failed to start (exit status=1)
Ok Martin,
tor 2006-08-17 klockan 22:03 +0300 skrev Martin Ivanov:
Mr Claesson,
with my current configuration, the ups.status when the UPS is disconnected
from the mains is OB. There is no more OB BOOST. Now my upsd.users is:
That's good.
8--snip-
battery.charge: 97.7
Yep
tor 2006-08-17 klockan 22:49 +0300 skrev Martin Ivanov:
And something else, that previously eluded from my thoughts:my notifyme
script,i.e the script that is executed at an ups.status=OB event, is:
echo `date` /root/upsLog
echo No power, shutting down the system! /root/upsLog
OK Kipp,
ons 2006-09-20 klockan 21:50 -0500 skrev Kipp Cannon:
On Wed, 20 Sep 2006, Kipp Cannon wrote:
8--snip
Hi,
Thanks for this suggestion. Unfortunately, I followed the instructions in
the manual to put the UPS into Printer Mode, 2400 Baud, and nothing
Hi Rohan,
mån 2006-10-16 klockan 09:52 +0930 skrev Rohan M.:
Hi everyone,
First of all a big thank you for the NUT package, I've been using it for
years and couldn't get by without it!
Thanks.
I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120
has used a hacked
Hi Pedro,
tor 2006-11-02 klockan 12:48 + skrev Pedro Côrte-Real:
I have an MGE Ellipse Premium 1200 that I connected to my server using
its USB cable. Nut seems to be working fine. I've done a power down
test and it worked and came back up when the UPS had power again. I'm
using the
Ok
tor 2006-11-02 klockan 14:59 + skrev Pedro Côrte-Real:
On 11/2/06, Kjell Claesson [EMAIL PROTECTED] wrote:
Hi Pedro,
Hi
It depends on what dist of Linux you are running. The new type
use udev and hal and the old use coldplug.
So little more info about your system please
Hi Doug,
ons 2006-11-15 klockan 22:22 -0500 skrev Doug Reynolds:
8snip
I haven't figured out what the F060 or the 0S is. they always stayed the
same. when the UPS went dead and
turned off, it would still reply with the same reply, but all the
Hi Gregory,
tis 2007-01-30 klockan 14:43 +0900 skrev Gregory Orange:
Hi,
I've browsed the archives back for a few months and nothing has jumped
out at me as being helpful, but since there doesn't seem to be a search
facility it's certainly possible I've missed what I'm looking for.
Anyway,
Hi Steve.
sön 2007-02-04 klockan 03:30 +1100 skrev Steve Simeonidis:
I have an FC5 system with a powerware 5110 usb ups.
The system seems to find the UPS
--
[EMAIL PROTECTED] src]# lsusb
Bus 004 Device 001: ID :
Bus 003 Device 002: ID 0592:0002
.
Regards
Kjell Claesson
tor 2007-03-01 klockan 09:37 +1100 skrev Paul Battaglia:
Hi All,
I'm trying to communication with the HP r3000 XR UP using the latest
stable build and I'm getting the following errors. Can anyone
enlighten me with the errors below and what other course of action I
can
Hi Theo,
You can try to run the driver only with the ups.conf.
Locate the bcmxcp_usb driver. then run this command.
/path/to/bcmxcp_usb -DD -a powerware
(exchange the /path/to with the right path)
Now it should spit out som debug info if the communication is ok.
You should also upgrade to
Hi Massimo,
ons 2007-03-28 klockan 16:36 +0200 skrev Massimo Martinelli:
Hi
I set up my ups with driver snmp-ups, and it get recognized as a AEC T2003.
In the nut-cgi upstats page input/output/load are displayed corectly, but the
Status field is marked as Not supported.
Is Status
Hi Gonzalo,
ons 2007-03-28 klockan 16:22 -0300 skrev gonzalo campuris:
THANKS, but the 'megatec' driver only works whith windows OS via USB,
and i need it for red hat OS with USB-serial connection...
No need to be upset, what Arjen de Korte was referring to was that the
ups use the megatec
OK Arjen,
I think i need more time in my bed.
tor 2007-03-29 klockan 08:42 +0200 skrev Arjen de Korte:
THANKS, but the 'megatec' driver only works whith windows OS via USB,
and i need it for red hat OS with USB-serial connection...
No need to be upset, what Arjen de Korte was referring to
Hi,
tor 2007-03-29 klockan 18:24 +0200 skrev Massimo Martinelli:
Alle 20:22, mercoledì 28 marzo 2007, Kjell Claesson ha scritto:
Yes the status is used for shutting down the system. So it would be
needed to make a correct shutdown .
I noticed that you are running version 2.0.4. I think
ons 2007-04-04 klockan 16:23 +1200 skrev Douglas Pearless:
Hi,
Hi Douglas,
I have a Comapq T2400H model 242688-003 and do not have the special
cable to connect it to my serial port.
I have tried all sorts of cable wirings that I found on the net,
including ones for the powerware 5119
Hi Douglas,
tor 2007-04-05 klockan 08:08 +1200 skrev Douglas Pearless:
Debian, latest stable, upsdrvctl --version gives 2.0.1 Cheers Douglas.
That's not so good. The upscode2 driver was entered into the 2.0.2
release. And nut is now on 2.0.5 in stable (Minus a bug in the bcmxcp
driver :-) )
Hi
ons 2007-04-18 klockan 15:51 +0800 skrev Gregory Orange:
Arnaud Quette wrote:
2007/4/17, Kjell Claesson [EMAIL PROTECTED]:
It all seems to work but the initial errors or warnings concern me. I'm
running stable 2.05 built from source.
This come from the baudhunting function
Hi Andreas.
Sorry to say but this is just brought to our attention on the
development list (2 hours ago). This ups seems to have a different
product id.
It means that it maybe using different protocols. So switch to
development list and follow up on the discussion.
Regards
Kjell
fre
Hi Russ
fre 2007-05-18 klockan 11:16 -0400 skrev Russ Romano:
Can anyone give me insight into upsrw?
I have a cyberpower PR2200 UPS (running an experimental version of the
powerpanel driver hot off the presses by Arjen (thanks Arjen!!)).
When I try to run upsrw -s xyz=abc to set any
Hi,
lör 2007-05-19 klockan 14:24 +0100 skrev [EMAIL PROTECTED]:
Hi all,
I've more-or-less got NUT 2.0.4 working with my Powerware Prestige
1000VA UPS (serial), but unfortunately NUT is flagging LOW_BATTERY
continuously, which is a tad embarrassing when power fails ;-)
Can you upgrade to
Hi Steve,
Just updated the trunk, so do an 'svn up' to update the trunk.
Follow the advise from Peter. Was not thinking about the configure
flags. So run 'configure --help' and set the paths.
Regards
Kjell
sön 2007-05-20 klockan 09:14 +0100 skrev [EMAIL PROTECTED]:
Hi Kjell,
Kjell
OK Eric,
Den Tuesday 22 May 2007 08.56.08 skrev Eric S. Raymond:
Kjell Claesson [EMAIL PROTECTED]:
Or install the udev rules and replug the ups.
Did that. Manual startup of the driver now works without -u root,
indicating (I think) that the udev rools are doing their job. This
8
Den Tuesday 19 June 2007 13.12.48 skrev [EMAIL PROTECTED]:
Hello All
Hi Varain,
I have a MicroDowell ups (BBox BP 1000) connected to a Gentoo box by serial
cable. If I try to start the driver , I see the following :
Network UPS Tools - CyberPower text protocol UPS driver .05 (2.0.5)
Den Wednesday 20 June 2007 07.21.57 skrev [EMAIL PROTECTED]:
8snip---
Thank you, but for now I'll try the powerpanel driver (as Arjen advised).
I'll let you know if things work out.
Yes there have been some changes to the drivers. Some have merged into
Den Thursday 26 July 2007 01.19.00 skrev Stuart Rackham:
Hi
Hi Stuart,
I'm having a problem with the bcmxcp_usb driver FSD command: everything
seems to work apart from:
upsmon -c fsd
8snip
This part have been answered.
One peculiarity --
Hi Niels,
Den Friday 10 August 2007 13.26.56 skrev Niels Baggesen:
On Thu, Aug 09, 2007 at 04:59:13PM +0200, Bernd Markgraf wrote:
that's indeed not so good... the ietf mib reports them OL but misses some
values. like the 3 input phases, temperature etc and gives me
battery.runtime.low of 1
Den Friday 02 November 2007 13.00.46 skrev Tobias Balle-Petersen:
Hello...
Hi Tobias.
I have a PowerWare 9120 attached via USB to my Debian system.
My ups.conf looks like this:
[ups1]
driver = bcmxcp_usb
port = auto
desc = PowerWare 9120
When testing the
Den Wednesday 07 November 2007 12.06.11 skrev Tobias Balle-Petersen:
OK Tobias,
I have tried two different USB-cables. The one that came with the UPS and
another one I had lying around. I have tried both ports on the computer
(Apple mac G4).
Was there any difference in the communication ?
Den Thursday 08 November 2007 16.11.11 skrev Tobias Balle-Petersen:
Tobias Balle-Petersen wrote:
Hello Arjen.
Arjen de Korte wrote:
Adding 'baudrate = 9600' to the 'ups.conf' entry for this UPS should fix
this.
Strange, it tells me this is not supported. I'm on 2.0.4.
Ahh... It
Den Friday 09 November 2007 13.09.32 skrev Arjen de Korte:
I have a PW9120 hooked up via a serial cable running NUT 2.0.4.
When running upsc I cant see any parameter that looks like it would
trigger a shutdown. Theres is
nothing like battery.charge.low: 30 or battery.charge.warning: 30.
Den Saturday 01 December 2007 00.11.21 skrev Radu:
Hi Radu,
I'm trying to get a Powerware 5125 UPS running using the bcmxcp driver,
but I get the following errors:
video2:~# /sbin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.4
Network UPS Tools - BCMXCP UPS driver 0.10
Hi Daniel, (Eller hejsan.)
Den Monday 07 January 2008 09.28.41 skrev Daniel Nyström:
I've got some strange problem with NUT on my 5115 on Debian Etch:
---snip---
$ sudo ./bcmxcp_usb -DDD -a 5115
Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181)
Warning: This is an experimental
Hi Patrick,
Den Wednesday 09 January 2008 05.11.57 skrev Patrick Ohearn:
Hello,
I am attempting to monitor my two Powerware 3110 UPS from Gentoo Linux
using nut-2.2.0, kernel-2.6.22.1 via USB. From what I can gather around
the net (circa 2005) things with USB on this UPS just didn't work. Has
Den Wednesday 30 January 2008 16.11.15 skrev Chencho Pc-cito:
Hi all.
Hi Chencho,
I'm under Ubuntu 7.10 server
I use a SALICRU UPS Advance
I install nut and nut-usb, write some config files, but i cannot connect to
UPS.
At ups.conf i wrote:
[salicru]
driver = newhidups
port = auto
PROTECTED]:~/nut-trunk$
Ideas?
Kjell Claesson wrote:
Den Monday 18 February 2008 10.51.35 skrev Daniel Nyström:
Hi Daniel,
This is fixed in tha latest trunk and also in the testing branch that is
going to be the next release.
You can grab a tarball from http://buildbot.ghz.cc/public
/daniel/nut-trunk/drivers'
make: *** [install-recursive] Error 1
[EMAIL PROTECTED]:~/nut-trunk$
I guess it's pretty simple, since all other files works.
Kjell Claesson wrote:
Den Monday 18 February 2008 15.25.26 skrev Daniel Nyström:
OK,
There have been some updates to the configure
Den Sunday 02 March 2008 04.53.29 skrev Greg:
Hi Greg,
I'm not sure if this is the right list to send this to but anyway heres
a new entry for your UPS hardware compatibility list (stable)
Think most of the devs is also monitoring this list.
Manufacturer - UPSonic Model - PC POWER UPS PCP600
Den Saturday 30 August 2008 21.31.44 skrev Jerome BENOIT:
Hello List,
Hi Jerome,
I would like to control the big Delta box that protect the cluster of my
group: I am not familiar with those kind of machine, but quite familiar
with (Debian) Linux.
That is good.
Does anyone know which NUT
Den Monday 01 September 2008 18.04.22 skrev Jerome BENOIT:
Hi again Jerome,
Not 100% sure but it looks like it is tha same as belkin use.
So for start, try the belkin driver's and then the megatec driver.
the driver belkin is the good one !
OK, can you send some info to the list.
Product
Den Tuesday 02 September 2008 20.11.28 skrev Jerome BENOIT:
Hello !
Hi Jerome
On the manual and the box, I read:
Delta GES N-Series 6kva (on line series)
On the other hand, upsc gives
ups.mfr: BELKIN
This depends on the driver. If the request for manufacturer
fails to return anything, it
Den Wednesday 03 September 2008 15.56.11 skrev Jerome BENOIT:
OK Jerome,
Here is the full list:
battery.charge: 100
battery.temperature: 000
battery.voltage: 274.0
driver.name: belkin
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.version: 2.2.2
Den Monday 27 October 2008 17.59.44 skrev Seann Clark:
All,
Hi Seann,
8snip-
What I am seeing that is the problem now is that the driver starts
correctly, and initially displays information back from the UPS, but on
any
Den Tuesday 28 October 2008 17.39.25 skrev Seann Clark:
Hi Seann and Arjen,
Could not keep me from looking at this.
The driver looks OK, and changing the timing (delays) in it is not going to
help.
Then I turned to google. Looks like there is a regression in the kernel.
Den Tuesday 09 December 2008 18.39.58 skrev Aldo Caruso:
Hi,
Hi Aldo,
I have an UPS Powerware 5110 ( usb connection ), on Linux OS is
Debian 4.0
Good info, but it would be better to know the nut version. And the driver
version number also.
The /etc/ups.conf file setting is:
[myups]
Den Tuesday 16 December 2008 15.48.48 skrev Sudirikku Mohanjith:
Hi,
Hi Mohanjith,
I cannot find Mustek drivers or PowerMust drivers that support Mustek
UPSes in the NUT source. Looking at the source I see that mustek is
added to svn:ignore. Could I know where I can get either driver or
know
Den Tuesday 16 December 2008 20.39.17 skrev Sudirikku Mohanjith:
Hi Kjell,
OK Mohanjith,
Thanks for the quick reply, much appreciated.
I tried the megatec driver with no luck. Bellow you will find part of
the ups.conf and the output from upsdrvctl.
From /etc/nut/ups.conf
[patriot]
Den Thursday 18 December 2008 17.05.59 skrev du:
Hi Kjell,
Hi Mohanjith,
The UPS is from one of the local manufacturers IE Tec. They no longer
produce this UPS. I tried all drivers with no luck, namely apcsmart,
belkin, belkinunv, bestuferrups, bestups, cpsups, cyberpower,
energizerups,
Den Saturday 20 December 2008 16.39.55 skrev Mathew McBride:
Hello all,
Hi Mathew
I have obtained a Compaq T700 H UPS sans-cable. My research indicates it
would've come with a HP #201092-001 cable, and from previous posts on
this list, it speaks upscode2, possibly being a rebadged Eaton unit.
Den Saturday 20 December 2008 20.29.43 skrev Charles Lepple:
Hi Charles,
On Sat, Dec 20, 2008 at 11:40 AM, Kjell Claesson
kjell.claes...@epost.tidanet.se wrote:
Attache a pdf with info from Compaq. Se if it helps.
(attachment removed from posting to list)
If we're allowed to distribute
Den Wednesday 31 December 2008 06.31.05 skrev Herman C Lau:
To all,
Hi Herman,
I attempted to configure the UPS tools for the Tripp-Lite SmartOnline
1500VA 2U rackmount UPS. I followed the instructions from the 'upsdrvctl
start' output and posted the diagnostic information below.
Is my
Den Tuesday 13 January 2009 03.40.58 skrev Mathew McBride:
Hi Mathew,
I managed to obtain the original cable for this UPS, and it turns out,
according to some poking with a multimeter, that it is a simple straight
through. I managed to connect the UPS and setup NUT ok.
One thing I would
Den Tuesday 13 January 2009 23.27.02 skrev Arjen de Korte:
Hi Arjen,
It would be nice if the driver would also report
'battery.voltage.nominal', so that clients don't have to guess it. We
need this for instance when drawing bar graphs in the CGI programs.
That take some more time, This is in
fredag 13 februari 2009 20:52:41 skrev Arnaud Quette:
Hi Doug,
8---snip
Really hate that MGE drop those models as I really like the quality and
design.
not that easy!
This part of MGE has not been droped, but sold to Eaton.
All the good
lördag 14 februari 2009 14:40:07 skrev Doug Parsons:
OK Doug,
I saw those as well but need the online model as I have had some issues
with offline models and rapid power cycles. When you have an automatic
transfer switch between two ups units and your equipment, the rapid cycles
can cause
fredag 27 februari 2009 18:35:11 skrev Arnaud Quette:
2009/2/27 KP Kirchdoerfer kap...@bering-uclibc.de
8---snip--
Try this driver again, but make sure to add
productid = 1f06
to the ups.conf entry for this device. Chances are
fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer:
8snip---
Bus 001 Device 002: ID 03f0:1f06 Hewlett-Packard
Device Descriptor:
bLength18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass
fredag 27 februari 2009 19:09:27 skrev KP Kirchdoerfer:
Am Freitag, 27. Februar 2009 18:54:00 schrieben Sie:
fredag 27 februari 2009 18:48:58 skrev KP Kirchdoerfer:
8snip---
If you ask me to run upsdrvctl with -D I'll don't geht more
fredag 27 februari 2009 19:37:42 skrev KP Kirchdoerfer:
You can rise the debug level by adding D. So try -DDD .
I have not worked with the usbups_hid driver but it should give
some more info.
Yep; I tried that also, but didn't got more output
OK, then we have a bastard ;-(
The only
lördag 28 februari 2009 16:36:54 skrev Charles Lepple:
There's a subtle difference here - adding '-D' to the upsdrvctl
command line increases the verbosity of upsdrvctl, not the driver that
it starts.
For testing, you would want something like:
/lib/nut/usbhid-ups -D -a compaq-ups
lördag 28 februari 2009 20:37:44 skrev waa-...@revpol.com:
Hi Bill,
8--snip-
Here is a current upsc output: (on batteries for about 50 mins now)
--[snip]--
# upsc smart...@localhost
battery.alarm.threshold: 0
battery.charge: 000.0
Hi Again Bill,
Checked up the manual for the APC.
It looks like you have to do some configuration with the POWERCHUTE SOFTWARE.
Reset the battery date and make a runtime calibration test.
If this is not done it may as it say in the Problem and/possible cause
THE LEDS IN THE BATTERY BAR GRAPH
söndag 15 mars 2009 23:57:18 skrev Attila Csontos:
Hi Kjel,
I was trying both, but I got message unknow UPS (or similar like
this). Maybe nut
does not support this model UPS till now.
This sounds strange. Maybe Arnaud can answer this.
B.t.w. Have you checked that the nut driver have right
måndag 16 mars 2009 14:32:44 skrev Arnaud Quette:
OK all,
8--snip--
It happens only when I start driver with -DD (or more 'D'). When I run
only with -D, it working normally.
all the debug outputs there are at level 2. so nothing but
fredag 20 mars 2009 15:03:25 skrev Attila Csontos:
Hi Attila,
I was trying build new driver from svn, I think, that driver is now OK.
There is output from PW9130.br
debug level is '2'
Connected to UPS on /dev/cua/a with baudrate 9600br
Length of meter map: 92
torsdag 16 april 2009 02:25:58 skrev Greg:
Hi everyone,
Hi Greg,
Been searching like crazy to find an answer to this. I have even read some
of the source code but cannot figure this one out.
I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut)
I have configured the
fredag 17 april 2009 15:36:24 skrev Greg:
Hi Kjell,
Hi. Sorry for the delay.
Thanks for the follow up. Answers below...
OK Greg, I can not locate the package you used for installing NUT,
but the device should be capable of running NUT.
I was thinking if HAL is enabled in the package so the
tisdag 21 april 2009 14:43:28 skrev Greg:
Hi Kjell,
Hi Greg,
Sorry for the late reply been doing a lot of testing.
No problem.
I got the package from
http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/nut_2.4.
1-1_arm.ipk It pretty much pre-compiled which are then extracted
Greg and Arnaud
I missed to add that I'm also interested in this one: unset USB_DEBUG
lsusb -d06da:0002 -v on your 9.04. I can't find it back in the thread.
@Kjell: do you see anything that could lead to that kind of regression?
I'm not sure that it's on our side though.
I can not set the
On Tue, May 26, 2009 at 09:51:31PM -0400, Brother Railgun of Reason wrote:
Hi,
ups.conf looks like this:
[tokamak]
driver = bcmxcp
port= /dev/tty00
baud_rate = 19200
desc= HP R3000XR (main rack)
(Oops. That's *after* changing to the 19200
Hi again,
Just a couple of values are bothering me here... hoping anyone else
with an R3000XR can advise.
Nice to see that you got it running.
battery.charge: 33.1
battery.runtime: 442
battery.voltage: 129.2
This may indicate a faulty battery in the pack.
You have 10x12volt, and it
, it now happened at a time where I could log
in to see in real time what is happening and:
$ upsc PW5125 | grep status
ups.status: TRIM
This is fixed in a later release of the driver.
From change log:
Wed Jan 14 21:45:10 UTC 2009 / Kjell Claesson kjell.claes...@epost.tidanet.se
- drivers
Hi all,
Hi Greg,
I've got a Powerware 5110 UPS that I'm trying to set up with nut in
Ubuntu. I've installed nut and configured the first two files:
$ cat /etc/nut/nut.conf
MODE=standalone
$ cat /etc/nut/ups.conf
[pw5110]
driver = bcmxcp_usb
port = auto
# port =
OK Jon, just a comment.
is bcmxcp a eaton driver?
For some years ago Eaton purchased Powerware, but the driver
was developed before that. On the nut 1.4 series it was Martin Schroeder
that made the driver. But it was dropped, so i was sitting with some Powerware
ups'es that I have to monitor.
OK David,
Kjell,
Thanks for your time in replying.
The cable is a regular commercial shielded cable and is only six feet
long. Grounding should not be an issue, everything is on a single
circuit with a single ground and is powered through the UPS itself, all
in one cabinet, so all grounds
OK,
Should I try changing the polling frequency just to see if it helps?
Don't think it would help. If it would be a problem with poll frequency, the
error should be continuous and constant. The same is if there was any problem
with the driver to the specific model of ups you are running.
2009/8/28 Thomas Zulliger thomas.zulli...@quiksilver.com.au
Hi Arnaud and Thomas.
Can not reproduce it.
upsdrvctl -DD start
Network UPS Tools - UPS driver controller 2.4.1
Starting UPS: pw3105
exec: /lib/nut/bcmxcp_usb -a pw3105
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB
1 - 100 of 129 matches
Mail list logo
