To: PDML
Subject: Re: epson 2400
> Am 22.03.23 um 20:39 schrieb Henk Terhell:
> Never had any luck with printers and I estimate their life time on my
> desk is around 3 years.
Hmm. Back in the early '00s, I went through a couple of older Epson 13" dye ink
printers … they both worked
On 3/22/2023 5:40 PM, Godfrey DiGiorgi wrote:
Am 22.03.23 um 20:39 schrieb Henk Terhell:
Never had any luck with printers and I estimate their life time on my desk
is around 3 years.
Hmm. Back in the early '00s, I went through a couple of older Epson 13" dye ink
printers … they both worked
> Am 22.03.23 um 20:39 schrieb Henk Terhell:
> Never had any luck with printers and I estimate their life time on my desk
> is around 3 years.
Hmm. Back in the early '00s, I went through a couple of older Epson 13" dye ink
printers … they both worked okay, but one of them died from the
Am 22.03.23 um 20:39 schrieb Henk Terhell:
Never had any luck with printers and I estimate their life time on my desk
is around 3 years.
I had a Epson A3+ photo printer with dye-based inks which worked fine
for years and gave beautiful prints until there was a problem with
banding and Epson
> Fail: The Frustrating Truth'.
> >
> > Henk
> >
> > Op wo 8 mrt 2023 om 22:48 schreef David J Brooks :
> >
> >> I went to print a document this afternoon and when I turned on my Epson
> >> 2400 printer, the green light came on for a short moment, I
rt 2023 om 22:48 schreef David J Brooks :
>
>> I went to print a document this afternoon and when I turned on my Epson
>> 2400 printer, the green light came on for a short moment, I heard a
>> clicking sound then the paper jam and low ink red lights started to flash
>> alter
document this afternoon and when I turned on my Epson
>> 2400 printer, the green light came on for a short moment, I heard a
>> clicking sound then the paper jam and low ink red lights started to flash
>> alternatively.
>>
>> Anyone run into this issue with a 2400, its
'.
Henk
Op wo 8 mrt 2023 om 22:48 schreef David J Brooks :
> I went to print a document this afternoon and when I turned on my Epson
> 2400 printer, the green light came on for a short moment, I heard a
> clicking sound then the paper jam and low ink red lights started to flash
> a
Thanks, saw that video, not my printer, i mis named the printer its the
Epson Stylus R2400 printer i;ll have a google look and see if mine has a
light sensor
Dave
On Wed, Mar 15, 2023 at 3:02 PM Steve Cottrell wrote:
> Could be th ‘light sensor’ needs a clean - as per this video:
>
>
Could be th ‘light sensor’ needs a clean - as per this video:
https://www.youtube.com/watch?v=7NCH4nCK1wo
Easy job - you eny good with a small screwdriver?? ;-)
Cot
On 14 Mar 2023, at 13:25, David J Brooks wrote:
I did Cotty, :-) but when I power the unit on there is a click sound, then
On Mon, Mar 13, 2023 at 2:24 PM Steve Cottrell wrote:
>
>
> Dave - you need to RTFM to find out the flashing light combo and what it
> means ;-)
>
> Cotty
>
I did Cotty, :-) but when I power the unit on there is a click sound, then
the lights come on, the print head does not go through a cycle
One of the things that many people don’t realise is that whenever the print
heads go through a cleaning process, they do it by squirting ink through the
heads. The ink falls out of the bottom and into ‘wells’ usually packed with
foam. These wells become full over the years until ink literally
I went to print a document this afternoon and when I turned on my Epson
2400 printer, the green light came on for a short moment, I heard a
clicking sound then the paper jam and low ink red lights started to flash
alternatively.
Anyone run into this issue with a 2400, its about 15 years old
I
press the paper feed
> button. Do that a couple times and you should get the roller pretty
> clean. Happens with all papers but is most prevalent when you print a
> bunch on matte paper.
>
> -p
>
> On 1/31/2020 8:29 AM, David J Brooks wrote:
> > For quite a while n
, David J Brooks wrote:
For quite a while now when i go to print something on my Epson 2400 it just
feeds sheets through the machine. It does this for anywhere from 3-6 times
and then it will grab the paper normally and print
Any ideas as to why. Rolls dirty, wore out ?? communication issues
On 1/31/2020 8:29 AM, David J Brooks wrote:
For quite a while now when i go to print something on my Epson 2400 it just
feeds sheets through the machine. It does this for anywhere from 3-6 times
and then it will grab the paper normally and print
Any ideas as to why. Rolls dirty, wore out
For quite a while now when i go to print something on my Epson 2400 it just
feeds sheets through the machine. It does this for anywhere from 3-6 times
and then it will grab the paper normally and print
Any ideas as to why. Rolls dirty, wore out ?? communication issues.??
Dave
--
Documenting
Ya it took me a while to figure out Apple had the drivers. Me thinks
that was or is part of the probnlem. Downloaded now so we'll see.
Dave
On Fri, Dec 23, 2016 at 7:04 AM, Paul Stenquist wrote:
> Apple supplies the Epson printer drivers. Go to the Apple Store and click the
Apple supplies the Epson printer drivers. Go to the Apple Store and click the
upgrades link. It should automatically check to see if you need them. Make sure
also that you have the icc paper profiles and that Lightroom is controlling
color. If you're set up to have the printer control color,
On Thu, Dec 22, 2016 at 8:54 PM, Paul Stenquist wrote:
> Odd. I print on a Mac with two clicks and can almost always nail it with one
> attempt.
>
> Paul via phone
Normaly that has been my case but since the OS upgrade not so much. As
i mentioned in an email i discovered i
Odd. I print on a Mac with two clicks and can almost always nail it with one
attempt.
Paul via phone
> On Dec 22, 2016, at 8:15 PM, Zos Xavius wrote:
>
> At the very least you should be able to set custom sizes and select
> those. Its been an awful long time since I used
At the very least you should be able to set custom sizes and select
those. Its been an awful long time since I used an epson on a mac but
I remember it being very similar to windows since it is using the
printer driver for most of the choices. I also remember now how much I
hated printing from
On Thu, Dec 22, 2016 at 6:13 PM, Igor PDML-StR wrote:
>
> I've never used LR on Mac, so, I am not familiar with possible
> peculiarities. On Windows, it works this way:
> There are some LR print templates that set the page size, and some others
> that don't. So, it is a
I've never used LR on Mac, so, I am not familiar with possible
peculiarities. On Windows, it works this way:
There are some LR print templates that set the page size, and some others
that don't. So, it is a combination of choosing the template and "page
setup" that is needed to be done in a
Hi all.
Prior to my upgrading to OS 10.11.6 my printing from LR went mostly
well. I now find that it will only print via LR as 8x10 even if i
select the 4x6 or 5x7 templates. Not sure whats what here.
dave
--
Documenting Life in Rural Ontario.
www.caughtinmotion.com
I still have print problems in LR.
I printed out an 8x10 recently, set the dimensions to 8x10 and it printed fine.
I tried printing out a 5x7 of a friends dog from thanksgiving, set the
sizes in L;R and the Epson print window, but all it would do is print
about 3x5 on the 5x7 paper.
I'm doing
I'd need to know more ... precisely what operation you performed ...
to say anything.
Normally, I print 5x7s two-up on an 8.5x11 sheet of paper and cut them
afterwards. I find that simpler. But I have printed 5x7 and other
sizes with no problems.
G
On Oct 25, 2008, at 6:02 AM, David J
I didi the conversions etc in LR then went to the print module. The
canvas was set at 8x10 as from my previous print job, that went
well.
As i only wanted one 5x7 and used the Epson 5x7 paper, i set the guide
lines on the canvas to 5x7 and then when the Epson print box popped up
i set the paper to
In LR, first use the Page Setup button to pick a printer and page size/
orientation. Then use the Printer Setup button to bring up the driver
dialog and set up the printing specifics for the paper type and
quality you want. Now set up the print formatting in LR... Layout,
Overlays, Print
You changed the paper size so the printer put a same ratio print to paper size.
Leave the paper size as 8x10 and when you specify 5x7 it will print 5x7.
Walt
On Sat, Oct 25, 2008 at 12:13 PM, David J Brooks [EMAIL PROTECTED] wrote:
I didi the conversions etc in LR then went to the print module.
Thanks Godfrey and Walter.
I'll try that Sunday for a print i want.
Dave
On Sat, Oct 25, 2008 at 12:59 PM, Walter Hamler [EMAIL PROTECTED] wrote:
You changed the paper size so the printer put a same ratio print to paper
size.
Leave the paper size as 8x10 and when you specify 5x7 it will
Hi all.
Last week my 2400 was working fine. This week its printing out dark.
One print had an sRGB colour space look to it even though I'm printing
in Rgb.
For some reason, when i went to print this morning, all my settings in
print preview were changed. I reset them and printed. Same results.
I
On what system? What is your printing workflow? etc
Photoshop often seems to lose the settings at the driver level the
first time you go to the Print driver dialog from Print With Preview.
You should always check them before making a print.
Lightroom retains all the driver settings properly,
And thats when this started, from the customer file
Dave
On 8/23/07, David J Brooks [EMAIL PROTECTED] wrote:
PC XP home CS2.
Calibrate monitor with Syder I.
Adjust photo in PSCS2
Print from Preview
Colour Adobe rgb
Let PS determine colours
Set paper profile and relative colourmatic and
So have you tried going back to your original reference file for the
photo, with the embedded profile, and printing from that? The
customer file was evidently stripped of any profile information,
which means you need to profile it properly and readjust it for
printing..
If you are not
Sorry, i did keep the original file, he just wanted a file to use for
a web thing, and he sent me back his adjutments.
I also went and printed several other horse photos from different
days, and they came out dark aswell. The photos them selves are nice
and crisp and sharpness is right were it
I tyhink, maybe that file he sent me screwed something up.
I rebooted and uncliked the black point box and reprinted on of the horse shots.
Looks a lot better.
Something with NO coulr management in the return file might have set
up flags in the epson.
I 'm just quess on that though
Sorry to
PC XP home CS2.
Calibrate monitor with Syder I.
Adjust photo in PSCS2
Print from Preview
Colour Adobe rgb
Let PS determine colours
Set paper profile and relative colourmatic and black point
Print box is set up for paper etc.
Advanced and turn of colour management
Basically everything is the
Have you tried using soft proofing in PS?
Open a photo that you have already printed. Then go to ViewProof
Setup then select Custom... and in the Device to Simulate drop down
list select the appropriate printer/paper profile, then click OK. You
can turn the soft proofing on off by pressing
No i have not Dave.
I'll try.
I calibrated the monitor Tuesday, again, and did some colour prints
today. The colours on the horse and jumps are fine, but nowi see the
blue sky has some greyish to it and my sand is darker than the
monitor.
I assign rgb colour space when printing.
Maybe its just
Just wondering if someone out there, that is happy with what they
print in BW could make a few screen shots and send me or post here,
so i can see where i'm still going wrong here.
Premium Glossy Paper and proper epson profile for same.
Dave
--
Equine Photography
www.caughtinmotion.com
I'd love to help Dave, but my PC is still down for repairs.
Basically I don't do anything different when printing BW, than I do
when printing colour (ie select the paper profile in the print setup
window, let PS determine colours, colour management off in the print
driver)
No doubt someone will
I have the driver on the mac now, but i use the pc mostly.
Anything will help. I'm still getting darker than monitor prints, and
the colour is spot on to the calibration using the Spyder i picked up
from Mark a while back.
Coulor i'm very pleased with.
Dave
On 7/5/07, [EMAIL PROTECTED] [EMAIL
Mac or PC?
I'm very happy with my Mac/R1400 BW output. Unfortunately, I'm at work right
now.
Paul
-- Original message --
From: David J Brooks [EMAIL PROTECTED]
Just wondering if someone out there, that is happy with what they
print in BW could make a few screen
OK, I loaded the print drivers onto my laptop, here are the setting I use (PC):
PS print dialogue:
http://www.arach.net.au/~savage/Misc/SS_001.jpg
Print driver dialogue
http://www.arach.net.au/~savage/Misc/SS_002.jpg
Cheers,
Dave
On 7/5/07, David J Brooks [EMAIL PROTECTED] wrote:
Just
Like Dave Savage, I print in BW exactly the same way that I print in color. I'm
using PSCS. I set the ICC profile to the paper type in Print With Preview and
make sure the color space that I'm printing in agrees with that of the file.
In the print box I select the paper type, then check to
David J Brooks wrote:
I have the driver on the mac now, but i use the pc mostly.
Anything will help. I'm still getting darker than monitor prints, and
the colour is spot on to the calibration using the Spyder i picked up
from Mark a while back.
Coulor i'm very pleased with.
Dave
This sounds
Normally I do, unless it's just a quick print of a snapshot. I never
use RPM though. In my opinion it doesn't improve the image quality
enough to justify the extra ink it uses.
I've updated the screenshot.
Cheers,
Dave
On 7/5/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I'm surprised you're
I'm surprised you're not printing Best or RIM quality with hi-speed off.
Paul
-- Original message --
From: David Savage [EMAIL PROTECTED]
OK, I loaded the print drivers onto my laptop, here are the setting I use
(PC):
PS print dialogue:
Ok, i see nothing out of the ordinary from what i have.
The monitor is calibrated, colour prints come out exactly like the
monitor, BW is darker than monitor, and from what i see, Dave's
settings are the same as mine.
Ann. I had to do that with my Canon, and hoped to avoid doing that
with the
Oh, i had anothe look at the PS screen.
I see you have the relative colourmetric, black point box turned off.
I have that turned on.
Lets see if thats it.
Dave
On 7/5/07, David Savage [EMAIL PROTECTED] wrote:
Normally I do, unless it's just a quick print of a snapshot. I never
use RPM
I use exactly the same setup to print BW or Color from Photoshop CS2
on Mac OS X. The Print W Preview dialog and Epson R2400 printer
dialog settings are detailed here:
http://homepage.mac.com/godders/R2400-CS2-print/
Only changes in recent months is that I have some of Epson's optional
Never mind. I quess they just install them selves as they see fit.
I can see them now.
Dave
On 6/23/07, David J Brooks [EMAIL PROTECTED] wrote:
Ok, i have finally got a round and installed the 2400 on the ibook G4.
I also downloaded the latest ICC profiles as prompted in the CD. Now i
ahve
Ok, i have finally got a round and installed the 2400 on the ibook G4.
I also downloaded the latest ICC profiles as prompted in the CD. Now i
ahve to ask, were do i put them. I cannot seem to find anywere on the
harddrive, any Epson profiles, but they are they when i do a print
preview of an
David Savage wrote:
On 12/28/06, Mark Roberts [EMAIL PROTECTED] wrote:
David Savage wrote:
I had a blocked nozzle last week.
We know sod-all about space travel but if you've got a blocked nozzle
we're your lads!
Geez you are a fan Mark. I had to Google that one.
As the days go by, we
:: pick Off (no Color Adjustment)
Godfrey
On Dec 27, 2006, at 3:31 PM, Paul Stenquist wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work with the 2400. I'm
David Savage wrote:
I had a blocked nozzle last week.
We know sod-all about space travel but if you've got a blocked nozzle
we're your lads!
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
On 12/28/06, Mark Roberts [EMAIL PROTECTED] wrote:
David Savage wrote:
I had a blocked nozzle last week.
We know sod-all about space travel but if you've got a blocked nozzle
we're your lads!
Geez you are a fan Mark. I had to Google that one.
Cheers,
Dave
--
PDML Pentax-Discuss Mail
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work with the 2400. I'm testing with
BW, since that immediately shows a color cast. Everything is coming
up Sepia. I
Macintosh, btw.
On Dec 27, 2006, at 6:31 PM, Paul Stenquist wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work with the 2400. I'm testing with
BW, since
Can't help with your color problems. I usually print my BW inkjet
prints black ink only. Got any plans for the 2200?
On 12/27/06, Paul Stenquist [EMAIL PROTECTED] wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which
.
These are the same settings I use for BW I get no colour casts.
HTH
Cheers,
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work
[EMAIL PROTECTED] wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work with the 2400. I'm testing with
BW, since that immediately shows a color cast. Everything
,
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked flawlessly
with the 2200, doesn't seem to work with the 2400. I'm testing with
BW, since that immediately
in the print driver.
These are the same settings I use for BW I get no colour casts.
HTH
Cheers,
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
with PhotoShop CS1. My 2200 ColorSynch setup, which worked
That all looks fine to me. What are your settings in the Page setup dialogue
I'm surprised your having problems with BW. I got great results, free
of colour casts, straight out of the box.
Cheers,
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
My latest print is looking quite
My page setup dialogue doesn't allow for much. I have it set for
Super B Paper, Epson 2400 printer.
Paul
On Dec 27, 2006, at 9:01 PM, David Savage wrote:
That all looks fine to me. What are your settings in the Page
setup dialogue
I'm surprised your having problems with BW. I got great
PROTECTED] wrote:
My page setup dialogue doesn't allow for much. I have it set for
Super B Paper, Epson 2400 printer.
Paul
On Dec 27, 2006, at 9:01 PM, David Savage wrote:
That all looks fine to me. What are your settings in the Page
setup dialogue
I'm surprised your having problems
comes into play.
New toys are fun hey?! :-)
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
My page setup dialogue doesn't allow for much. I have it set for
Super B Paper, Epson 2400 printer.
Paul
On Dec 27, 2006, at 9:01 PM, David Savage wrote:
That all looks fine to me. What
Excellent.
I should have thought of that, as I had a blocked nozzle last week.
Cheers,
Dave
On 12/28/06, Paul Stenquist [EMAIL PROTECTED] wrote:
I solved it. The printer I bought was a display model. (I got it for
a very good price, considering it was from a retail camera store.)
The ink
On 12/27/06, Paul Stenquist [EMAIL PROTECTED] wrote:
The ink had been loaded some time ago. And the nozzles were clogged.
A nozzle cleaning made everything perfect. Just made a beautiful
print. I'm a happy man. Thanks for your help.
On my Epson, if you hold down the paper feed/nozzle cleaning
That should be: Inspecting the 2400 print with reading glasses...
Paul
On Dec 27, 2006, at 10:36 PM, Paul Stenquist wrote:
Well, one wouldn't expect it with a new printer. But I knew it had
been a display model. Should have thought of that right off. In any
case, I printed a gang sheet that I
Well, one wouldn't expect it with a new printer. But I knew it had
been a display model. Should have thought of that right off. In any
case, I printed a gang sheet that I had printed on the 2200 just a
couple of days ago. Inspecting the 2500 print with reading glasses
showed it to have
on
- click Print button
3 Epson driver dialog
- Print Settings:: pick Enhanced Matte Paper, Color, Advanced mode
- Color Management:: pick Off (no Color Adjustment)
Godfrey
On Dec 27, 2006, at 3:31 PM, Paul Stenquist wrote:
I bought an Epson 2400. I'm having trouble getting it set up to work
Hope its cleared up. Did you take some sort of medication?
Quoting David Savage [EMAIL PROTECTED]:
Excellent.
I should have thought of that, as I had a blocked nozzle last
week.
Cheers,
Dave
Cheers
Brian
++
Brian Walters
Western Sydney
75 matches
Mail list logo