I have been wrestling with this all day, it seems I am unable to extent
file system, this seems to crop up on/off on the max2play forums, but
nothing works.
I have a clean SD card, burn the img and then boot up.
I then try and expand filesystem.
'Resize Filesystem:
No Resize possible - no valid
kidstypike wrote:
> Picture below says it all, works for me.
Thanks for the speedy reply kidstypike, that looks like it should do the
job.
Will give it a go at the weekend :-)
Cheers, Paul
Sent from my SM-T710 using Tapatalk
Paden wrote:
> Hey all
> Not much activity in this thread of late (hopefully everyone is problem
> free!) but I'd like to raise a problem my brother has with his HiFiBerry
> AMP+ (which uses the Raspberry Pi 2) & hope some people still look in
> :-)
> It seem each time the unit is rebooted, the
Hey all
Not much activity in this thread of late (hopefully everyone is problem
free!) but I'd like to raise a problem my brother has with his HiFiBerry
AMP+ (which uses the Raspberry Pi 2) & hope some people still look in
:-)
It seem each time the unit is rebooted, the attached USB hard drive's
Well I tried this again today and all is working fine.
> Linux max2play 4.1.13-v7+ #1 SMP PREEMPT Mon Nov 23 15:29:15 UTC 2015
> armv7l GNU/Linux
>
Same kernel but different text (I don't know if this is significant).
It did take a couple of extra reboots to get the dac in the Squeezelite
bobertuk wrote:
> Unfortunately yes, I'm sure. 14.04 is in fact Ubuntu 14.04 LTS. The LTS
> means Long Term Support - other later versions are only on short term
> support. Reading around on th Odroid web site confirms this
>
> I've been running the update routine regularly and there have been
slartibartfast wrote:
> Are you sure updates are no longer provided for Ubuntu 15.04? My
> max2play is based on 14.04 and still gets updates.
>
> Sent from my SM-G900F using Tapatalk
Unfortunately yes, I'm sure. 14.04 is in fact Ubuntu 14.04 LTS. The LTS
means Long Term Support - other later
bobertuk wrote:
> This is really a question for the Max2play team - probably @flysurfer.
>
> The Max2play image for Odroids is based on Ubuntu 15.04 and as I'm sure
> you are aware, that is no longer supported so there will be no further
> updates provided. This is obviously a security concern
This is really a question for the Max2play team - probably @flysurfer.
The Max2play image for Odroids is based on Ubuntu 15.04 and as I'm sure
you are aware, that is no longer supported so there will be no further
updates provided. This is obviously a security concern even if the
underlying
Stefen, today I made a new image for a rpi2 with the intent of using my
Northstar Essencio as a player again.
I completed the choice in the Raspberry Settings, rebooted and went to
Audioplayer but the dac is not listed as an output.
Checked the kernel version and did an update/upgrade, but it
Paden wrote:
> Hey all
> Any one had an issue with the latest 7.9 nightly ~1459450109?
> The max2play interface tells me Squeezebox Server is running but I'm
> unable to connect via Webadministration & have no display on my players.
> If I roll back to 7.8.1 all appears well again.
>
> Cheers,
Hey all
Any one had an issue with the latest 7.9 nightly ~1459450109?
The max2play interface tells me Squeezebox Server is running but I'm
unable to connect via Webadministration & have no display on my
players.
If I roll back to 7.8.1 all appears well again.
Cheers, Paul
Man in a van wrote:
> Here is a copy of mine with the added line.
>
> Ronnie
>
> 20129
Ronnie, thanks for the use of your config.txt file, which I shovelled
into place, didn't help though.
However, see next post :)
kidstypike
LMS on Raspberry Pi 2 model B/max2play/HiFiBerry DAC+ > AVI
flysurfer wrote:
> For Raspberry Pi 3 users with HifiBerry Digi+ or DAC+ Pro: I added an
> option to remove the Bluetooth Support from RPI3 to the Raspberry Pi
> Settings addon (will be available in next release or get it now with
> Beta Update).
Turning the volume up to a realistic level, I'm
For Raspberry Pi 3 users with HifiBerry Digi+ or DAC+ Pro: I added an
option to remove the Bluetooth Support from RPI3 to the Raspberry Pi
Settings addon (will be available in next release or get it now with
Beta Update).
2 x Max2Play on ODROID U2/U3 with LMS, Squeezelite, Shairport, XBMC
1 x
kidstypike wrote:
> Turning the volume up to a realistic level, I'm getting clicks and pops.
> (HiFiBerry Digi+)
> Is there anyone else seeing this?
Last post in this link might be helpful, don't know if it will conflict
with Stefan's work.
kidstypike wrote:
> Ronnie
>
> You've got more faith in me than I have :( I've managed to end up with
> a completely blank config file!
>
> Nevermind, the Pi works as a server, so I'll wait for a new all singing
> version of max2play.
>
> Thanks to all for your help. :D
Here is a copy of
Ronnie
You've got more faith in me than I have :( I've managed to end up with
a completely blank config file!
Nevermind, the Pi works as a server, so I'll wait for a new all singing
version of max2play.
Thanks to all for your help. :D
kidstypike
LMS on Raspberry Pi 2 model
kidstypike wrote:
> Thanks
>
> I've added the line "dtoverlay=pi3-disable-bt" at the bottom of the
> config file, but I'm not sure it's in the correct place, as the player
> still hisses, crackles and pops no matter which card option I select.
>
> >
Code:
> > # For
flysurfer wrote:
> For the new Jessie based Image of Max2Play, I did not add the user root
> for a direct SSH connection. You always have to SSH in with user "pi"
> and PW "raspberry" like in the original Raspbian as @Man in a Van said.
> If you want to get superuser rights you can either enter
For the new Jessie based Image of Max2Play, I did not add the user root
for a direct SSH connection. You always have to SSH in with user "pi"
and PW "raspberry" like in the original Raspbian as @Man in a Van said.
If you want to get superuser rights you can either enter any command
with the
Man in a van wrote:
> Have you tried
>
> user: pi
> password: raspberry
>
>
>
> Or put the card in a reader into a windows machine, the boot files used
> to be accessible that way.
>
> Ronnie
>
> Edit; still are
>
> >
Code:
> > # For more options and information
kidstypike wrote:
> Thanks for the heads up.
>
> I'm trying to add the line "dtoverlay=pi3-disable-bt" to
> boot/config.txt. Using WinSCP, I cannot SSH into my Pi3 with
> IPaddress/root/max2play, no problem SSHing into my Pi2. Any pointers?
>
> Thanks
Have you tried
user:pi
flysurfer wrote:
> Hi,
>
> we had an issue with the licence validation this weekend due to a change
> to SSL-secured shop and website - sorry about this. You can fix this if
> your license is not shown as activated by removing your mail address ->
> click save -> enter your mail address again
Hi,
we had an issue with the licence validation this weekend due to a change
to SSL-secured shop and website - sorry about this. You can fix this if
your license is not shown as activated by removing your mail address ->
click save -> enter your mail address again -> click save.
HiFi-Berry Digi
Same issue and reported this via the max2play website
Sent from my iPhone using Tapatalk
stefaanbolle's Profile: http://forums.slimdevices.com/member.php?userid=64728
View this thread:
I saw a notice on the main screen that there was a Max2Play update, so I
got it. A series of plug in updates.
Now my install shows Not Activated with the email address I registered
it with in January.
Issues on the authentication end?
I rebooted & checked again. No love.
Suggestions, other than
Stefan
OK, inserted a fresh install from the beta download at max2play
(m2p_Jessie_wps_228.img), using the update button worked this time, LMS
is now scanning a USB HDD.
Thanks.
+---+
|Filename: Fix.jpg
flysurfer wrote:
> Hi!
>
>
>
> If anyone has bluetooth speakers and wants those to work with Max2Play -
> Good news, I have a new addon that helps connecting, keeps the
> connection on reboot and creates the audioutput for your audioplayers.
> The Addon is in Beta and available for testing:
>
flysurfer wrote:
> Hi!
>
> A lot of work to do to get the Jessie based version running smoothly...
> thank's a lot for all your feedback!
>
> I added a patch to the Beta-Update today to fix the mounting of
> NTFS-Drives in Jessie. Usbmount is causing the error... just update to
> latest beta
Hi!
A lot of work to do to get the Jessie based version running smoothly...
thank's a lot for all your feedback!
I added a patch to the Beta-Update today to fix the mounting of
NTFS-Drives in Jessie. Usbmount is causing the error... just update to
latest beta and reboot (important).
Next will
Mushroom_3 wrote:
>
> I wish there was a way to stop it automatically updating to 2.27 from
> 2.26 image.
Max2play has always been a manual update for me.
Can you not just ignore the Nag Screen:confused:
Ronnie
Man
I have just lost all sign of my ext usb on a RPi 2/Hifiberry with
max2play 2.27; so maybe it's not just a RPi 3 problem.
This si the 3rd time I have set it up from new and it works for about 3
weeks then fails. It is not my network problem as LMS is still working
with the iPlayer just fine. I
Man in a van wrote:
> Had a play this morning.
>
> The same result as yourself; USB stick, no problem.
>
> Swapped it out for a Samsung M3 USB drive, direct into the pi,
>
>
>
> But no usb0 when I looked to scan.
>
> Sorry:(
>
> atb
>
> Ronnie
>
> I have tried Raspbian headless on the
Just had a quick go with a MY BOOK
Hard disk recognised
> My Book in /media/usb0 (Device /dev/sda1 with UUID C6B04293B0428A3F)
Apparently mounted
> Directory created: /media/usb0
> Mountpoint successfully added
But again, nothing showing under USB 0.
This is the text from the Debug:
>
kidstypike wrote:
> Further to my last post above.
>
> I've got a Raspberry Pi 3, downloaded and installed the beta M2P as
> provided by flysurfer, thank you.
>
> Problem is I cannot access any HDD that I connect to the Pi, (I've tried
> three), they appear as mounted, but I cannot select then
Thanks Kidstypike. I tried and there was sound. The quality though was
bad. Let's hold our thumbs for a working update soon.
Skickat från min iPad med Tapatalk
Dadid's Profile:
Dadid wrote:
> Just installed the beta image for RasPi3. Can't get the digi+ from
> Hifiberry to work. It's just buzzing. It worked until now on a RasPi 2.
>
> Skickat från min iPad med Tapatalk
Same here, Pi3/beta/Digi+, awful loud hiss. I selected the second up
from bottom, and this worked
Just installed the beta image for RasPi3. Can't get the digi+ from
Hifiberry to work. It's just buzzing. It worked until now on a RasPi 2.
Skickat från min iPad med Tapatalk
Dadid's Profile:
It would be great to implement this Spotify connect feature in the
Max2Play image!
Looking forward to this!
Skickat från min iPad med Tapatalk
Dadid's Profile: http://forums.slimdevices.com/member.php?userid=62341
View
Giza2020 wrote:
> Hey there.. this was an interesting post!
>
> Can you explain about scplayer some more... I've had a look and it
> appears to be a working spotify connect tool for the PI2 .. is that
> about right?
>
> Do you have this working alongside the Max2play LMS set up?
>
> Also, can
Man in a van wrote:
> I might be able to have a play at the weekend.
>
> What about, tick box for select fixed mountpoint... and then reboot?
>
> Ronnie
Thanks for your reply, but it's not that, tried many times. Whichever
"usb slot" (I don't know the correct terminology) is allocated to a
I might be able to have a play at the weekend.
What about, tick box for > Set fixed Mountpoint to prevent directory switching
on reboot
and then reboot?
Ronnie
Man in a van's Profile:
Further to my last post above.
I've got a Raspberry Pi 3, downloaded and installed the beta M2P as
provided by flysurfer, thank you.
Problem is I cannot access any HDD that I connect to the Pi, (I've tried
three), they appear as mounted, but I cannot select then in LMS, nor are
they visible on
mctubster wrote:
> Wanted to say a quick thanks for the Max2Play image ... bought a license
> and have replaced my Squeezebox touch with a RiP2 ...
>
> Considering getting the touch screen and your custom case too :)
>
> Did this so I could have Spotify Connect support running as well. There
>
Wanted to say a quick thanks for the Max2Play image ... bought a license
and have replaced my Squeezebox touch with a RiP2 ...
Considering getting the touch screen and your custom case too :)
Did this so I could have Spotify Connect support running as well. There
is a java wrapper called
flysurfer wrote:
> @kidstypike: you find the new SD-Card Image as download marked as BETA
> under the "Max2Play Raspberry Pi Image":
> http://www.max2play.com/en/max2play-image/
> It should have all updates to get the Pi 3 running - althrough I
> couldn't test it yet.
OK, thanks, progress.
Man in a van wrote:
> Does anyone have the command line instruction to disable the blinking
> (and I mean that!) blue led light on the Odroid C1:confused:?
>
> The one for the U3 does not work
>
>
>
> and I have had no luck with Google search.
>
> Thanks
>
> Ronnie
Stefan, any reply
kidstypike wrote:
> Thanks flysurfer
>
> I picked up a Pi 3 earlier, the two image versions I've tried don't
> boot. The Max2Play/SP version just results in a power LED on, no
> activity LED. The default 226 version results in 4 long then 4 short
> flashes (repeatedly) of the activity LED.
>
@kidstypike: you find the new SD-Card Image as download marked as BETA
under the "Max2Play Raspberry Pi Image":
http://www.max2play.com/en/max2play-image/
It should have all updates to get the Pi 3 running - althrough I
couldn't test it yet.
2 x Max2Play on ODROID U2/U3 with LMS, Squeezelite,
flysurfer wrote:
> I will release a Beta of version of Max2Play with Debian Jessie (latest
> Raspbian Build for Raspberry Pi 3) this week, which will also include
> possible drivers for the inbuild WiFi and Bluetooth. The Current
> Max2Play versions build on Debian Wheezy will also run on the
kidstypike wrote:
> I have a Raspberry Pi B+/HifiBerry Digi+, using it as a player and LMS
> server, although this combination works fine, it's a little slow as a
> server.
>
> If I purchased the new Raspberry Pi 3 Model B and added the HifiBerry
> Digi+, and Max2Play, would it work ok out of
I have a Raspberry Pi B+/HifiBerry Digi+, using it as a player and LMS
server, although this combination works fine, it's a little slow as a
server.
If I purchased the new Raspberry Pi 3 Model B and added the HifiBerry
Digi+, and Max2Play, would it work ok out of the box?
kidstypike
LMS on
Does anyone have the command line instruction to disable the blinking
(and I mean that!) blue led light on the Odroid C1:confused:?
The one for the U3 does not work
>
>
> root@OdroidC1:~# echo 10 > /sys/class/leds/led1/delay_on
> -bash: /sys/class/leds/led1/delay_on: No such file or
E.Man wrote:
> So here's where I got to :
>
> Plugged the Touch and the Pi (and PC) into the Router. Touch found Pi
> and played off the HDD.
>
> So I then just went direct Touch > Pi with Network cable and it still
> worked but the screen slightly flickered now and then.
>
> I then turned
So here's where I got to :
Plugged the Touch and the Pi (and PC) into the Router. Touch found Pi
and played off the HDD.
So I then just went direct Touch > Pi with Network cable and it still
worked but the screen slightly flickered now and then.
I then turned the Pi off and turned the Touch
kidstypike wrote:
> You now need to configure Logitech Media Server (LMS):
>
> On the SqueezeBox Server page you should see a link to the LMS web
> interface, click that. When it's opened click "Settings" bottom right,
> then enter the path to your music folder and hit apply bottom right,
>
You now need to configure Logitech Media Server (LMS):
On the SqueezeBox Server page you should see a link to the LMS web
interface, click that. When it's opened click "Settings" bottom right,
then enter the path to your music folder and hit apply bottom right,
this should trigger a scan.
kidstypike wrote:
> Brought from PM
>
> Forget the SBT for the moment, you *don't* connect it to the Pi.
>
> If you've installed Logitech Media Server you need to attach the HDD
> containing your music library to the Pi.
>
> On the Max2Play interface / Filesystem Mount page you should see
E.Man wrote:
> > kidstypike wrote:
> >
> >
> > You need to find the IP address of your Raspberry Pi, type it into a web
> > browser on a PC on your network and hit ""Enter" this should load the
> > Max2Play web interface. If you have a smartphone, install an app called
> > "Fing", this will
I've been trying to get Max2Play setup to run as a Squeezebox player but
having trouble with the wifi. I have an original Pi B, Edimax USB wifi
adapter, latest version of M2P. I can access through LAN but when I
enter my wifi info and save, I get a message that the adapter is
active but no IP.
Hi Paden,
good to hear it's working again! The "usb" folder is just a symlink to
"usb0" within media-folder.
2 x Max2Play on ODROID U2/U3 with LMS, Squeezelite, Shairport, XBMC
1 x Squeezebox Receiver
1 x Denon 1713 AVR + Nubert 5.1 System
iPeng
Max2Play Webinterface and SD-Image:
Paden wrote:
> Hi flysurfer
> Would you expect an Odroid U3 with your image to be able to re-sample
> 24-bit/96kHz on the fly?
> Mines not :-(
>
> Cheers, Paul
Reinstalled the latest max2play image & HiRes files now play ok.
Cheers, Paul
Hi guys
Just wanted to ask if anybody has tried to start Soekris DAC on
Max2play? I've just bought one and wandering if there'll be much trouble
to set it up.
I'll appreciate any help!
Thanks
awietek's Profile:
Hey all
I've noticed on my Odroid U3 setup, that has only one USB HDD attached,
that my files appear duplicated on both "USB" & "USB0" within media.
Is this normal?
Cheers, Paul
Paden's Profile:
Hi flysurfer
Would you expect an Odroid U3 with your image to be able to re-sample
24-bit/96kHz on the fly?
Mines not :-(
Cheers, Paul
Paden's Profile: http://forums.slimdevices.com/member.php?userid=21468
View this
Hi!
First of all - thanks to all who answer questions and participate in
this project, Max2Play is getting better each day - any help is much
appreciated!
As some of you know, we have a special forum on the Max2Play page where
questions regarding the Max2Play-Image and the plug-ins are
Thanks for the help d6jg, but no, no clashes.
Nojelc's Profile: http://forums.slimdevices.com/member.php?userid=14353
View this thread: http://forums.slimdevices.com/showthread.php?t=101856
Nojelc wrote:
> Thanks for the help d6jg, but no, no clashes.
If you are junking the router I can tell you that the Draytek range will
do an ipsec site to site VPN where all traffic can be tunnelled down the
VPN. I do this for a mate in France who connects to his UK office and
gets UK stuff
One further thing before you junk the router. Is your network IP range
clashing with the range on the end of the VPN? If for example both were
192.168.1.x there would be issues.
*Vortexbox LMS 7.8 music on QNAP TS419p via NFS* iThingys/iPeng/Tablets
*Living Room* - SB3 -> Onkyo TS606 - >
Can anyone help with getting an Odroid/Max2Play set up working with a
VPN router? I want VPN to improve security, but also to access
geo-blocked content via Kodi.
I purchased my router a DSL-AC68U because I wanted to get all devices on
the network to operate over VPN. The router advertising
hello all
does anybody know how to run m2play on a raspberry pi zero ?
framboise's Profile: http://forums.slimdevices.com/member.php?userid=65252
View this thread: http://forums.slimdevices.com/showthread.php?t=101856
Nojelc wrote:
> Can anyone help with getting an Odroid/Max2Play set up working with a
> VPN router? I want VPN to improve security, but also to access
> geo-blocked content via Kodi.
>
> I purchased my router a DSL-AC68U because I wanted to get all devices on
> the network to operate over VPN.
mkkyah wrote:
> First, this is not a Max2play or Odroid problem, they should work
> without a setup or port forwarding.
> Just to be sure, you probably have a private VPN server or paid VPN
> service to connect with your routers VPN client, do you?
> You then have to do the settings on your
I am not clear what you are trying to achieve. Please clarify a little.
I use a VPN client on my PC & iPhone that I use to connect to the VPN
server on my router. I then use either Squeezeplay (PC) or iPeng player
(iPhone) to stream my music. This works fine.
If however I attempted a Remote
No port forwarding should be necessary.
Do some tests as follows
Bring up the VPN
On a PC that "works" do a tracert to check that traffic is going down
the tunnel. Compare the route to the same tracert without the VPN up.
Assuming that the PCs are using the tunnel what DNS servers are they
using
mark wollschlager wrote:
> Nice looking setup.
> Any chance of a peek inside the box?
> Is the angle of the display fixed, or is it adjustable?
Hi Mark
The display can be changed from about 10 deg down, through upright to
about 45 deg back. When tilting down, I have to be careful not to
Hi
Many thanks for your excellent distro "Max2Play for the 7 Touch
Display for Raspberry Pi"
I have installed this on a Raspberry Pi 2 with:-
IQAudio Dac+
256Gbyte USB stick (readonly)
FLIRC remote, (using my old Squeezeplayer classic remote)
ATXRaspi power controller and push button
Nice looking setup.
Any chance of a peek inside the box?
Is the angle of the display fixed, or is it adjustable?
2 Duets controllers, 1 X Boom, 1 X Radio
1 X Receiver + Audioengine A5
1 X Receiver + Yamaha RX-A2000, Polk M70
1 X Receiver + Boston MicroSystem CD
Nexus 7 w/ Squeeze Ctrl
slartibartfast wrote:
> The obvious thing I was missing was that Zonealarm decided to put my new
> wireless network into a public zone rather than a trusted zone. Just
> took a day to find it.
>
> Sent from my SM-G900F using Tapatalk
"What larks,eh Pip?"
tum,te,tum,te,tumpty tum:)
slartibartfast wrote:
> This is weird. I have installed a Virgin superhub 2ac to replace a
> superhub 1. I was using the superhub 1 in modem mode with an external
> router and I could see my max2play server as a samba share on my laptop.
> Now I am using the new superhub as a router and I
doctor_big wrote:
> Ok, this is strange.
>
> On my Windows 7 machine, I can type in http://max2play/ or max2play/
> into the Chrome browser address bar, and it'll bring up the interface.
> Same with firefox. Works just fine.
>
> However, try it on my Ubuntu machine, or my wife's W10 laptop
Hey all - can the Max2play and it's little dongle handle WPA2-PSK [AES]
security? I can't see my network on the available list, and I REALLY
don't want to have to change my network around to handle this one
configuration issue.
Jason
Man in a van wrote:
> Jason.
>
> I just reread your original post and realised that the pi was using
> wi-fi as well.
>
> The wireless IP will be different to the Ethernet.
>
> Have you done the SD card,
>
> If I think my card is corrupted I write this file to it
>
>
Ok, this is strange.
On my Windows 7 machine, I can type in http://max2play/ or max2play/
into the Chrome browser address bar, and it'll bring up the interface.
Same with firefox. Works just fine.
However, try it on my Ubuntu machine, or my wife's W10 laptop - Chrome
or firefox - and it
I ran max2play for a month until I got a kernel panic (Kernel panic
not syncing : VFS: Unable to mount root fs on unknown-block) See message
above
I started all over again.
1. Formatted my sd-card with SDformatter in overwrite format
2. Installed 2.22 version from m2p on the card
3. Put card
I have max2play running for squeezebox en kodi. Did work great for more
than a month.
By now it gives me an error (see picture) and I can't go further.
Anybody any idea what has happened and how to fix it?
19443
+---+
Man in a van wrote:
> Put the card into a suitable reader/writer.
>
> For Windows:
>
> Download and install
>
> http://www.alexpage.de/download/usbit/usbit.zip
>
> When you use this, right click and use as administrator.
>
> Download the boot sector file I mentioned before and use the image
doctor_big wrote:
> Gonna try this on the weekend.
>
> What boot sector file do you mean? I went back a bunch of pages and
> can't find mention of it.
>
> I'm using a 16gb class 10 card.
>
> Thanks Ronnie!
http://www.alexpage.de/usb-image-tool/
doctor_big wrote:
> Correct on the url. The IP address does the same thing - page not
> found.
>
> FWIW, if I unplug and power up the machine, it won't register on the
> network, but if I then unplug and replug the network cable it's visible
> in my router. I'm beginning to think the board
Dr out of interest are you connected via a ethernet switch?... I'm
trying to think if there is any link to my issue and I am connected
behind a 5 port gig switch and was wondering if that was part of it?
Had any power outs or crappy power cycles? I think mine when each time I
turned the power
I'm going to spring for a new unit for my buddy - any suggestions on the
best max2play solution? Pi 2? Odroid C1+? He is using it with an
Emotiva DAC which is a bit flaky - perhaps go for a Pi2 with Hifiberry
DAC+ as a raplacement? I assume Max2play will work with that out of the
box?
Thanks
sfraser wrote:
> Guy's I want to build a Squeezebox Server/Player Amplifier for our
> Cottage over the xmas holidays. I was going to use Max2play and a
> HiFiberry Amp+ board in conjunction with a Raspberry Pi integrated into
> one case case. Music would be stored on a 128G thumbdrive.
Jason.
I just reread your original post and realised that the pi was using
wi-fi as well.
The wireless IP will be different to the Ethernet.
Have you done the SD card,
If I think my card is corrupted I write this file to it
http://www.alexpage.de/download/usbit/bootsector.img
using the
Thanks buddy.. the synology is a whole different pain ;-)
That one works great all except spotify saying I have an error -1 player
issue.
The readynas is now being relegated due to age ano general crapness.
I've also moved my lms over to my hp 260 g1 as I've bought a nvidia
shield as my kodi
Giza2020 wrote:
> Dr out of interest are you connected via a ethernet switch?... I'm
> trying to think if there is any link to my issue and I am connected
> behind a 5 port gig switch and was wondering if that was part of it?
>
> Had any power outs or crappy power cycles? I think mine when
Man in a van wrote:
> Sorry about that.:o
>
> I know nowt about Synology, but will keep thinking:confused:
>
> Ronnie
Thanks buddy.. the synology is a whole different pain ;-)
That one works great all except spotify saying I have an error -1 player
issue.
The readynas is now being
Sd formatter. .Google it and you'll find it
Giza2020's Profile: http://forums.slimdevices.com/member.php?userid=36318
View this thread: http://forums.slimdevices.com/showthread.php?t=101856
So how the heck do I format this SD card so I can reimage it? Aaaarg!
doctor_big's Profile: http://forums.slimdevices.com/member.php?userid=15196
View this thread: http://forums.slimdevices.com/showthread.php?t=101856
doctor_big wrote:
> So how the heck do I format this SD card so I can reimage it? Aaaarg!
Put the card into a suitable reader/writer.
For Windows:
Download and install
http://www.alexpage.de/download/usbit/usbit.zip
When you use this, right click and use as administrator.
Download the
301 - 400 of 1013 matches
Mail list logo
