Re: [qubes-users] HCL - Dell XPS 15 9560

On Mon, 20 Feb 2017 09:16:11 +0100 Stefan Schlott wrote: > Hi, > > installed Qubes 3.2 on my new laptop. After some initial problems, it > seems to be working great! > > After installing from the ISO image, the graphics driver was working > fine (at least I remember it this

Re: [qubes-users] HCL - 20H2S00700

On Tue, 14 Feb 2017 12:03:45 +0100 Vincent Wiemann wrote: > ... > Installation only possible with VNC as text installation mode doesn't > prompt for encryption password. > Sleep mode sometimes freezes the device. > > Hi Vincent, How did you use VNC for the

Re: [qubes-users] HCL - 20H2S00700

On Thu, 23 Feb 2017 11:35:26 + Mike Keehan <m...@keehan.net> wrote: > On Tue, 14 Feb 2017 12:03:45 +0100 > Vincent Wiemann <vincent.wiem...@ironai.com> wrote: > > > ... > > > Installation only possible with VNC as text installation mode > &

Re: [qubes-users] Re: HCL - Dell Latitude 7480

On Sun, 19 Mar 2017 21:39:15 -0700 (PDT) loke...@gmail.com wrote: > On Monday, 20 March 2017 12:27:43 UTC+8, lok...@gmail.com wrote: > > I have not been able to install Qubes 3.2 on this machine. > > > > The installer cannot start as the graphics card is not supported. > > The result is that

Re: [qubes-users] Installing Qubes 3.2 on an Alienware

On Fri, 17 Mar 2017 19:18:03 -0400 Tristan Fleming wrote: > Has anyone found a work around for Qubes on an Alienware 17 r4? > > I just bought this laptop thinking that it would work with Qubes. So > far, I havent had any luck. It was a good excuse to buy a new laptop, >

Re: [qubes-users] HCL - Dell XPS 15 9560

On Fri, 26 May 2017 12:40:03 -0700 (PDT) Alchemist wrote: > I just grabbed a new xps15 and the installer is falling back to text > mode. I'm not sure why we're getting different results on the same > computers. Anyone have any ideas? > Use EFI boot with the usb

Re: [qubes-users] No bootable device neither in BIOS or UEFI after Qubes R3 fresh install

On Fri, 5 May 2017 15:16:58 -0700 (PDT) 3...@arctop.co wrote: > > I am trying to install qubes on my xps 15 9560 but for some reason > > at the installation destination page the internal ssd is not > > detected any suggestions? > > I have the same issue, how did you solve it? > Change the

Re: [qubes-users] HCL - 20H2S00700

On Tue, 2 May 2017 20:39:31 -0700 (PDT) reubenprev...@gmail.com wrote: > On Thursday, February 23, 2017 at 5:40:19 AM UTC-6, Mike Keehan wrote: > > On Thu, 23 Feb 2017 11:35:26 + > > Mike Keehan <m...

Re: [qubes-users] Text-based install inevitably failing on my ASUS GL552VW

On Sun, 21 May 2017 09:36:35 -0700 (PDT) yessiou...@gmail.com wrote: > Hello, I tried to install qubes on my ROG laptop a couple months ago > and didn't get very far. These last couple of days, I've decided to > re-tackle the issue because I am really interested in using this OS. > This time, I

Re: [qubes-users] Possible to add second interface to sys-firewall?

On Fri, 6 Oct 2017 10:20:18 -0400 Ed wrote: > What I would like to do is add a second IP to both sys-firewall and > sys-net so that I can NAT traffic from one of my VM's in/out through > these IP's. So what I end up with is two IP's on sys-net, one > handling all the

Re: [qubes-users] Re: Possible to add second interface to sys-firewall?

On Fri, 6 Oct 2017 12:17:26 -0400 Ed <e...@edjusted.com> wrote: > On 10/06/2017 12:10 PM, Mike Keehan wrote: > > > > > Wouldn't it be possible to add a second Firewall VM to be used > > solely by your special single vm? > > > > Yes I be

Re: [qubes-users] New HCL Entry: Lenovo ThinkPad T470 (20HDCTO1WW)

On Thu, 30 Nov 2017 02:07:56 -0800 Joe Hemmerlein wrote: > Hi, > > so far it was easy to install and run Qubes OS 4.0 RC3 (and RC2) on > this hardware - as long as I keep boot mode on "Legacy Only". > > However, the TPM chip on this hardware works in UEFI boot mode

Re: [qubes-users] Please help list of supported graphics cards

On Sun, 3 Dec 2017 10:22:54 -0800 (PST) r...@tuta.io wrote: > Hey Mike. I did took the drive out and moved to my laptop. I run > qubes on there with 3.2. I can install 3.2 with no errors on laptop. > But when i tried to install 4 on the drive with laptop I get the same > errors. I cant seem to

Re: [qubes-users] New HCL Entry: Lenovo ThinkPad T470 (20HDCTO1WW)

On Thu, 30 Nov 2017 17:10:46 -0800 (PST) Joe Hemmerlein <voltylici...@gmail.com> wrote: > On Thursday, November 30, 2017 at 1:37:59 PM UTC-8, Mike Keehan wrote: > > Hi Joe, > > > > This is the content of my EFI/qubes directory after installing > > Qubes 4.0-rc3 i

Re: [qubes-users] install of 4.0 rc3 failing on XPS 15 (9560)

On Mon, 11 Dec 2017 02:45:23 -0800 (PST) Piers Saye wrote: > Dell XPS 15 (9560) 1TB 32GB HiRes Touchscreen > > 3.2 running fine with the previously documented fixes. > > > When I try and install 4.0 rc3 the installer hangs often prior to > getting to the GUI installer with a

Re: [qubes-users] Rc2 hangs on install -- Dell Inspiron i5759-8835SLV

On Wed, 1 Nov 2017 16:32:24 -0700 (PDT) billol...@gmail.com wrote: > Yeah, I'll do that. On the other hand, it may be a Fedora thing. > Just for giggles, I downloaded F26, and it won't install, either -- > it times out, though it gives a different error when it does. > > I use these cheap flash

Re: [qubes-users] Please help list of supported graphics cards

On Sun, 3 Dec 2017 05:52:14 -0800 (PST) r...@tuta.io wrote: > I have a asus strix 270g board with Intel I7 7700k chip. Monitor is > Ultra Hd. > > My asus rx580 doesnt work and cant seem to set my display to use > Intel graphics. > > Keep getting pane dead or lux key errors. > You probably

Re: [qubes-users] New HCL Entry: Lenovo ThinkPad T470 (20HDCTO1WW)

On Sun, 3 Dec 2017 03:03:59 +0100 Marek Marczykowski-Górecki wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > On Sat, Dec 02, 2017 at 01:02:52AM -0800, Joe Hemmerlein wrote: > > Danke, Stephan, your pointers were very valuable! > > > > At first, I

Re: [qubes-users] Please help list of supported graphics cards

On Sun, 3 Dec 2017 08:14:47 -0800 (PST) r...@tuta.io wrote: > Didnt think about how new it was. I even attempted linux mint > cinnamon and didnt install. Viewed fine on usb but wouldnt finish > install. > > Do you suggest the 4.0-rc3 install or is there a link to upgrading > kernal manually

[qubes-users] Nouveau driver does not work during installation of 4.0rc2

Hi, Installing 4.0rc2 fails after approx 600-700 packages. I found that one of the cpus was getting "stuck after 22secs" - the reason seems to be that the nouveau driver does not work with the version of the nvidia chips on my laptop (even the git kernel does not work with it yet). The same

Re: [qubes-users] Re: Nouveau driver does not work during installation of 4.0rc2

On Sun, 29 Oct 2017 12:11:59 -0700 (PDT) Foppe de Haan <0spinbo...@gmail.com> wrote: > On Sunday, October 29, 2017 at 3:44:45 PM UTC+1, Mike Keehan wrote: > > Hi, > > > > Installing 4.0rc2 fails after approx 600-700 packages. I found > > that one of the cpu

Re: [qubes-users] i7-8750U Coffee Lake Processor Experience.

On Sat, 19 May 2018 01:57:06 -0700 (PDT) deusestveritasinsempiter...@gmail.com wrote: > If you have used the i7-8750U Coffee Lake Processor with Qubes 4.0, > please drop a short message detailing (Make, Model ect) if it worked > for you. > >

Re: [qubes-users] i7-8750U Coffee Lake Processor Experience.

On Sat, 19 May 2018 08:53:31 -0700 (PDT) deusestveritasinsempiter...@gmail.com wrote: > > If it has nVidia graphics, try turning it off/blacklisting it. Been > > discussed many times on this list. > > > Have tried Nouveau.modeset=0 at the install menu using tab. > > When Qubes 3.2 was

Re: [qubes-users] Re: Slow network speed outside netvm

On Wed, 31 Jan 2018 05:23:19 -0800 (PST) Jarle Thorsen wrote: > Ilpo Järvinen: > > Please also check that GSO (generic-segmentation-offload) is on at > > the sending appvm eth0 (I don't remember if the depency logic > > causes it to get toggled off when SG was off'ed

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 08:00:33 -0800 (PST) Shashank wrote: > I am using dell XP’s 15 9560, I set the SATA option to ahci > Instead of RAID and boot into qubes. Qubes 3.2 worked with above > options perfectly. Is there a way I set legacy mode explicitly? I > couldn’t find

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 08:29:08 -0800 (PST) Shashank wrote: > I found it!! > I have a couple of questions before I change to legacy. Do you use > legacy and uefi? So the last time I was trying to install(ona diff > machine) I had switched to legacy and installed qubes rc3.

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 05:37:05 -0800 (PST) Shashank wrote: > Hi I’ve been trying to install qubes 4.0 rc4 in my dell xps15 > But I am not able to get the installation done. > > After I boot through the USB: > > *starting graphic installer > *if installer doesn’t start

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 06:45:00 -0800 (PST) Shashank wrote: > Hi > > The installation does not take me to the options for selecting > > Initially there is a long list of loading that happens > > And immediately after that it’s the screen that I’ve posted above > >

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 07:25:41 -0800 (PST) Shashank wrote: > Yes I am doing the same thing, in fact I had qubes 3.2 earlier > Now switching to 4.0. But I am getting this error. > > I enter the bios boot menu by hitting F12 (one time boot menu) > And then select the usb

Re: [qubes-users] 4.0-rc4 Install Help

On Sat, 3 Feb 2018 09:22:08 -0800 (PST) Shashank wrote: > I guess I’ll not jump into booting into legacy mode and having to > mess up all the boot options again. If you do find a way to install > it in uefi mode like 3.2 please do post the solution. > HI again. Well

Re: [qubes-users] New laptop install R4rc5 fresh install, X startup failed.

On Fri, 23 Feb 2018 05:50:40 -0800 (PST) Michael MENG wrote: > I bought new Dell i5577 with GTX1050 for R4, however, it shown X > startup failed when install, I got the same screen below. how can I > install R4? > >

Re: [qubes-users] HCL - Dell XPS 15 9560

On Wed, 27 Dec 2017 22:18:24 -0800 (PST) placeholderda...@gmail.com wrote: > Hey Mike, > > I am having the same issue as you described. Attempting to install > 3.2 or 4.0 on a usb and it fails to start X. On 3.2 it just straight > fails to start, on 4.0 it starts but then goes into a 'soft

Re: [qubes-users] High spec laptop for Qubes OS

On Sun, 25 Feb 2018 01:11:16 + a...@adammccarthy.co.uk wrote: > > > I'm going to buy a new laptop with a higher spec which should > hopefully handle things well. The following laptops are my final five > contenders. They all have a discrete GPU, which I'm hoping to > passthrough to a VM

Re: [qubes-users] Unsupported hardware detected

-d On Mon, 10 Sep 2018 13:16:59 +0200 Marc Ballesteros wrote: > Hello. > I am trying to install qubes os 4 on my computer, but I receive the > "Unsupported hardware detected" message (Missing features: > HVM/VT-x/AMD.V, IOMMU/VT/) > I verified the CPU compatibility with lscpu and I see the

Re: [qubes-users] Re: Security questions (templates and kde)

On Wed, 7 Mar 2018 12:54:17 -0800 (PST) Yuraeitha wrote: > > > I would love to hear how you divide your VMs up. I was looking for > > examples online, but I couldnt find any; aside from an (ITL?) essay > > I read last year. But starting easy and growing is good advice. >

Re: [qubes-users] New laptop install R4rc5 fresh install, X startup failed.

On Sun, 11 Mar 2018 06:51:35 -0700 (PDT) Michael MENG wrote: > On Tuesday, February 27, 2018 at 10:27:21 PM UTC+8, Yuraeitha wrote: > > On Tuesday, February 27, 2018 at 3:18:56 PM UTC+1, Michael MENG > > wrote: > > > Yes. I did , but still no luck. Also googled. I did

Re: [qubes-users] Re: control boot line in installer?

On Thu, 8 Mar 2018 10:46:31 -0500 Nathan Myers wrote: > On 3/8/18 1:19 AM, Nathan Myers wrote: > > I am trying to install on an ASUS ZenBook UV501 (Skylake, HD530, > > NV960M, NVME SSD). The installer kernel OOPSes because it loads the > > nouveau driver module, and gets

Re: [qubes-users] Qubes 4.0 on Dell XPS 13 9360 no longer boots anything!

> > Hey Mike, > > If you could find that email that would be fantastic. I have a > similar problem on my Dell XPS 13 9343 as described later in this > thread: > https://groups.google.com/forum/#!topic/qubes-users/G6lMHyD16xc > > Basically, I can only get Qubes 4.0 installed using Legacy boot,

Re: [qubes-users] Qubes 4.0 on Dell XPS 13 9360 no longer boots anything!

On Wed, 4 Apr 2018 10:46:04 -0700 (PDT) Scott B wrote: > I decided over the long weekend to install Qubes 4.0 on my laptop > after realizing that I could set up a dual-boot. I know this isn't > very security conscious, but I was more concerned whether the > hardware would

Re: [qubes-users] USB Device Question

On Sun, 15 Apr 2018 15:34:20 -0400 Stuart Perkins wrote: > I have the following setup: > > Qubes 3.2, xfce4 interface > sys-usb > > I want to be able to connect my Android phone to a vm and rsync its > contents. I can connect the phone and "qvm-usb -a" it to the VM,

Re: [qubes-users] suspend to ram, r8169, networking in sys-net not working after resume

On Sat, 21 Apr 2018 14:20:02 +0200 (CEST) wrote: > >> My issue: > >> > >> On qubes version r4.0 after resuming from suspend networking isn't > >> working. On qubes r3.2 this wasn't an issue. > >> > >> > >> After resuming from suspend to ram, networking on sys-net isn't >

Re: [qubes-users] Updates broke an HVM qube

ommand worked (it ran for a while, then > shut down), the problem still persists. > Hmm. Did you try resizing the terminal window by dragging a corner? I've a vague memory of seeing something like this in the past, but not on Qubes. Mike. > On Fri, Oct 26, 2018 at 6:39 AM Mike Keehan

Re: [qubes-users] Updates broke an HVM qube

On Thu, 25 Oct 2018 10:47:33 -0700 (PDT) drogo wrote: > I recently updated a fedora 28-based qube that I have running in HVM > mode. I also updated dom0 at about the same time. So I'm not sure > which update caused the issue. > > Now when I attempt to start the qube, the terminal for the

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

On Thu, 17 Jan 2019 16:42:28 -0800 (PST) scott.lewis.engin...@gmail.com wrote: > Hello, I apologize in advance if this has already been addressed but > searching for "sys-net" & "libxl" give many confusing results, I > don't see any that match both not working, and I'm completely new to > Qubes.

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

Ah, afraid I've run out of ideas now. I was hoping it was just the iommu not being enabled, but not starting any vm at all is not something I've seen before, as long as there is enough memory. 16Gb is fine. Sorry, out of inspiration now, Mike. -- You received this message because you

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

; > > > firewall failing to start. > > > > > > > > > On Fri, Jan 18, 2019, 07:22 Mike Keehan > > > > > > On Thu, 17 Jan 2019 16:42:28 -0800 (PST) > > > > scott wrote: > > > > > > > > > Hello,

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

On Fri, 18 Jan 2019 08:14:43 -0800 (PST) Bryce wrote: > On Friday, January 18, 2019 at 11:11:00 AM UTC-5, Mike Keehan wrote: > > Ah, afraid I've run out of ideas now. > > > > I was hoping it was just the iommu not being enabled, but not > > starting any vm at all

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

On Fri, 18 Jan 2019 11:55:14 -0800 (PST) Bryce wrote: > On Friday, January 18, 2019 at 11:42:32 AM UTC-5, Bryce wrote: > > > That's odd. You say you are installing 4.01, yet the qubes > > > manager shows that fedora is only release 26. I thought that > > > Qubes 4.01 had Fedora 29 in it. > > >

Re: [qubes-users] Account

On Mon, 21 Jan 2019 20:44:30 +0100 (CET) wrote: > I signed up for an account with Qubes and got the confirmation, and > here I am.  But when I go to post a reply, I am not recognized.  Does > anyone know why that is? > > Thank  you. > Your reply has to go via the gmail server. I had the same

[qubes-users] Backup stops when the backup file reaches 3Gb

Hi, I'm using Qubes Backup to save some of my qubes into another VM. The backup VM has 18 Gb of storage available, but whenever the backup file reaches 3Gb, the backup process just hangs. No CPU usage, no error messages, just stops. The backup window shows 40% complete, but never moves any

Re: [qubes-users] sys-net & sys-firewall fail to start, new install

On Tue, 22 Jan 2019 12:26:00 -0800 (PST) Bryce wrote: > On Saturday, January 19, 2019 at 6:37:47 AM UTC-5, Mike Keehan wrote: > > > > Ah, what a shame. It does seem as if your iommu is a problem. > > > > Without any other ideas, the only thing I can suggest is

Re: [qubes-users] password style

On Thu, 13 Dec 2018 03:43:33 -0800 (PST) pulpw...@gmail.com wrote: > no user login is possible. are there any unallowed chars in it? maybe > too long? > > the password was: > +jSyq@12_0rRwY7G&/mBAQ=|?{\#53Ouw8910q@3201i+./\nFVsc > Backslash character might be a problem, especially \n Maybe

Re: [qubes-users] alternative to bloated templates for faster work and minimal boot time/resources used

On Thu, 13 Dec 2018 20:31:29 +0100 799 wrote: > Hello Chris, > > On Wed, 12 Dec 2018 at 22:52, Chris Laprise wrote: > > > But here's how you could start the loop: > > qvm-ls --running -O name | (read line; while read line; do qvm-run > > -p $line 'your vm command goes here'; done) > > [...] >

Re: [qubes-users] [R4.0] CPU Freq Scaling, or "Why am I stuck at 2.1 Ghz?"

On Thu, 6 Dec 2018 15:54:17 -0800 (PST) Eric Duncan wrote: > Finally received my new Thinkpad X1 Yoga 3rd gen. > > i7-8650U up to 4.2 Ghz Turbo > > How can I debug/check that my CPU governor/frequency is scaling > correcting under Qubes R4? > > So far, the only thing I've found is xentop/xl

Re: [qubes-users] Domain qube1 has failed to start: Not enough memory to start domain 'qube1'

On Thu, 3 Jan 2019 05:29:15 -0800 (PST) mike wrote: > Hi All, > > Sometimes I cannot start any qube with a popup message as in Subject, > or when I run qvm-start I get: > > $ qvm-start qube1 > Not enough memory to start domain 'qube1' > > I have 16GB RAM and I am running just a few qubes, so

Re: [qubes-users] Backup stops when the backup file reaches 3Gb

On Thu, 24 Jan 2019 11:27:00 -0500 Chris Laprise wrote: > On 01/24/2019 06:29 AM, unman wrote: > > On Thu, Jan 24, 2019 at 01:00:15AM -0500, Chris Laprise wrote: > >> On 01/23/2019 08:15 PM, js...@bitmessage.ch wrote: > >>> Mike Keehan: > >>>

Re: [qubes-users] Backup stops when the backup file reaches 3Gb

On Fri, 25 Jan 2019 13:52:55 + Mike Keehan wrote: > On Thu, 24 Jan 2019 11:29:50 + > unman wrote: > > > On Thu, Jan 24, 2019 at 01:00:15AM -0500, Chris Laprise wrote: > > > On 01/23/2019 08:15 PM, js...@bitmessage.ch wrote: > > >

Re: [qubes-users] X events going to wrong VM?

On Thu, 28 Mar 2019 13:13:17 -0500 Daniel Allcock wrote: > Hello, > > Something peculiar happens occasionally on my qubes 4.0 system. I run > claws-mail in one VM, and mousing over the message list shows tooltips > as intended (not very useful; they just repeat the text that is under > the

Re: [qubes-users] Re: Blank Screen Trying To Install

On Sun, 24 Mar 2019 02:07:10 -0400 Yushatak wrote: > Machine has no legacy mode. > > On Sat, Mar 23, 2019, 11:32 PM Gaijin wrote: > > > On 2019-03-24 02:41, Yushatak wrote: > > > On Thursday, March 21, 2019 at 8:57:09 PM UTC-4, Yushatak wrote: > > >> When I boot the Qubes installation

Re: [qubes-users] Re: Blank Screen Trying To Install

On Sun, 24 Mar 2019 14:39:12 -0700 (PDT) Yushatak wrote: > On Sunday, March 24, 2019 at 3:36:10 PM UTC-4, awokd wrote: > > Mike Keehan wrote on 3/24/19 3:36 PM: > > > On Sun, 24 Mar 2019 02:07:10 -0400 > > > Yushatak wrote: > > > > > >> Machi

Re: [qubes-users] X events going to wrong VM?

Argh, I meant mouse events, not keyboard. On Fri, 29 Mar 2019 21:41:33 + Mike Keehan wrote: > On Fri, 29 Mar 2019 11:42:39 -0500 > Daniel Allcock wrote: > > > Thanks Mike, > > > > Your experience sounds even stranger than my own. I'm not sure > > w

Re: [qubes-users] X events going to wrong VM?

> events being sent to dom0 sounds like a way to make dom0 do things > possibly against user intent. > > btw, you wouldn't be the Mike Keehan that I worked for in Summer 1991 > at Shell? > > Daniel > Hi Daniel, I don't think it is events being sent to to dom

Re: [qubes-users] Hardware support

On Mon, 4 Mar 2019 12:41:23 + "'Robin Murison' via qubes-users" wrote: > My hardware suppliers are sure my desktop supports IOMMU and yet when > I try to install Qubes 4 the installation says it does not. My basic > question is that error reported based on a white list or on the actual >

Re: [qubes-users] Qubes - Critique (long)

On Fri, 15 Mar 2019 21:31:02 -0500 John Goold wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA256 > > *A Critique of Qubes* > Hi John, What a nice read, thank you. I have a very similar background, and age, so I was very interested to read your story. I've been using Qubes now for a

Re: [qubes-users] dispvm browser retains information

On Tue, 12 Mar 2019 08:35:04 + Jon deps wrote: > Hello, in Thunderbird when I do open-in-vm and check firefox it has > retained bookmarks from a previous session, > > I believe this is Not how DVMs are supposed to work ? > > > If so how would I troubleshoot and/or remove old DVM data

Re: [qubes-users] not enough memory to start domain "xyz"

On Sat, 16 Feb 2019 18:56:39 +0100 evo wrote: > On 2/16/19 1:10 PM, Johannes Graumann wrote: > > On Sat, 2019-02-16 at 11:21 +0100, evo wrote: > >> > >> On 2/16/19 11:17 AM, Johannes Graumann wrote: > >>> On Sat, 2019-02-16 at 11:08 +0100, evo wrote: > Hey! > > I got the

Re: [qubes-users] Backup stops when the backup file reaches 3Gb

On Thu, 24 Jan 2019 11:29:50 + unman wrote: > On Thu, Jan 24, 2019 at 01:00:15AM -0500, Chris Laprise wrote: > > On 01/23/2019 08:15 PM, js...@bitmessage.ch wrote: > > > Mike Keehan: > > > > Hi, > > > > > > > > I'm using

Re: [qubes-users] Fedora-26 template unable to update

On Fri, 25 Jan 2019 02:47:50 -0800 edalva...@riseup.net wrote: > I've been struggling to update my Fedora-26 template for a while. So > far none of the various bug-reports I've found on the issue seem to > help. > > I've checked that all URL's in /etc/yum.repos.d/qubes-r4.repo use > https as

Re: [qubes-users] Re: why mail-list?

On Fri, 01 Feb 2019 16:24:22 -0500 kitchm wrote: > I think that it is far more helpful for someone who has > actually done it to clearly and carefully explain the steps > involved to use the mail list (or google group postings or > whatever you call them) in Thunderbird and other e-mail >

Re: [qubes-users] Suggestion about an UI detail

On Tue, 5 Feb 2019 13:58:17 +0100 Nicklas Avén wrote: > Hi > > > I am a new happy Qubes user. Getting almost everything to work on a > Dell 7530 with xeon 2186 and Nvidia P3200. Qubes 4.01 made things > quite easy :-) > > > I find Qubes very intuitive to work with, but I have a suggestion >

Re: [qubes-users] Backup stops when the backup file reaches 3Gb

On Thu, 24 Jan 2019 11:27:00 -0500 Chris Laprise wrote: > On 01/24/2019 06:29 AM, unman wrote: > > On Thu, Jan 24, 2019 at 01:00:15AM -0500, Chris Laprise wrote: > >> On 01/23/2019 08:15 PM, js...@bitmessage.ch wrote: > >>> Mike Keehan: > >>>

Re: [qubes-users] Qubes backup UI stalls badly

On Tue, 16 Apr 2019 12:21:54 -0400 Ryan Tate wrote: > Today I went to backup my machine using Qubes backup GUI and near the > end (?) the progress bar was at 100% but the Finish button was not > clickable. I waited maybe half an hour, an hour, and tried closing > the window. I got an error

Re: [qubes-users] Re: desktop suspend breaks sys-usb/ CPU bug present

On Thu, 13 Jun 2019 19:28:38 + "'awokd' via qubes-users" wrote: > Mike Keehan: > > > There has been a thread on the Linux Kernel mailing list recently, > > discussing the need to re-enable the SMT chips during resume else > > something breaks, and then tu

Re: [qubes-users] has any one get fully worked archlinux template?

On Sat, 15 Jun 2019 07:31:18 -0700 (PDT) travorfirefuel...@gmail.com wrote: > subj > yes -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [qubes-users] Re: desktop suspend breaks sys-usb/ CPU bug present

On Thu, 13 Jun 2019 07:14:47 + "'awokd' via qubes-users" wrote: > Jon deps: > > On 6/12/19 8:14 AM, Jon deps wrote: > > >> Jun 12 07:52:01 dom0 kernel: MDS CPU bug present and SMT on, data > >> leak possible. See > >> https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html >

Re: [qubes-users] Full proper backup of Dom0 possible?

On Wed, 12 Jun 2019 10:29:54 -0400 Chris Laprise wrote: > On 6/11/19 6:50 PM, Chris Laprise wrote: > > I think the best solution for a safe and comprehensive dom0 backup > > is to have Qubes simply snapshot the root lv at boot time, before > > its mounted as read-write. It shouldn't take more

Re: [qubes-users] Re: desktop suspend breaks sys-usb/ CPU bug present

On Thu, 13 Jun 2019 19:28:38 + "'awokd' via qubes-users" wrote: > Mike Keehan: > > > There has been a thread on the Linux Kernel mailing list recently, > > discussing the need to re-enable the SMT chips during resume else > > something breaks, and then tu

Re: [qubes-users] Re: CPU overheating issues, pulsating fan, recommendations?

On Wed, 19 Jun 2019 18:57:52 + Jon deps wrote: > On 6/18/19 11:39 AM, Mike Keehan wrote: > > On Tue, 18 Jun 2019 04:44:04 + > > omerta-3q9s2cxqgw4kltdg6p0...@public.gmane.org wrote: > > > >> Hey all, > >> > >> Over the last week I've n

Re: [qubes-users] Problem with Wireless connection after reinstalling Qubes 4.0.1

On Sun, 23 Jun 2019 08:31:45 -0700 (PDT) Anhangá wrote: > Hi, > > I'm quite new using Qubes and I've never been so fond with Linux but > this changed last year so sorry for newbie questions in advance. > > I installed Qubes 4.0.1 using only wifi connection and it was working > 100% with wifi

Re: [qubes-users] CPU overheating issues, pulsating fan, recommendations?

On Tue, 18 Jun 2019 04:44:04 + ome...@firemail.cc wrote: > Hey all, > > Over the last week I've noticed my laptops CPU keeps peaking @ 80-85 > every now and then, even when I'm not doing any resource intensive > tasks. > > I run 11-12 VMs @ a time which barely scratches the 34GB RAM on a

Re: [qubes-users] Edit Dom0 conf.

Files in /etc are owned by the user 'root', so you need to use sudo to be able to change them. "sudo vi /etc/. ". Be carefull, these files are essential for correct operation of the system. You would be best advised to make a backup of any file you want to edit! Mike. On Tue, 09 Jul 2019

Re: [qubes-users] bottlenecks during qvm-backup

On Tue, 23 Apr 2019 21:58:17 +0100 lik...@gmx.de wrote: > Hi, > > is there a possibility to find the bottlenecks during a qvm-backup? A > backup of ~100GB with compression takes several hours. During the > time the (4) cpu cores (xentop) are not used well and the harddisk > (iotop) is also

Re: [qubes-users] Qubes Installation freeze

On Sun, 21 Apr 2019 11:52:32 -0700 (PDT) Blue wrote: > I've so far been unable to get qubes 4.0.1 to install on my Dell > laptop, it keeps freezing of file 909/1042 kernel-qubes-vm.x86_64. > Its a nvme drive if that makes a difference. > > I've verified the ISO of qubes and that matches, I

Re: [qubes-users] request : add to dom0 FFmpeg libraries and codecs h264/h265/libavcodec/libfdk_aac/libmp3lame/libopus/libvpx

On Sun, 11 Aug 2019 03:47:14 -0700 (PDT) john due wrote: > Hello, Dear Qubes users and devs! > > Can you add please FFmpeg libraries and codecs to dom0 repos? > Because it impossible to add RPMfusion repo to Dom0 and synchronize > it with dnf/qubes-dom0-update mechanism. > it required

Re: [qubes-users] Resizing partitions in QVMs

On Sat, 16 Nov 2019 02:44:24 - zenandart via qubes-users wrote: > Hi, > > I recently ran out space of xvdb on a QVM (while I still had plenty of > space on xvda), so I gave 10GB or so in Qubes Settings to the VM. But > all the new space went to xvda, and the space of xvdb didn't change. >

Re: [qubes-users] Time sync isn't working

On Mon, 09 Dec 2019 14:46:50 + "'Oli Sturm' via qubes-users" wrote: > On Monday, December 9, 2019 2:40 PM, Mike Keehan > wrote: > > > I suspect you need to investigate systemd's timesyncd stuff. Good > > luck! > > I believe I would just need to

Re: [qubes-users] Time sync isn't working

On Mon, 09 Dec 2019 14:04:10 + "'Oli Sturm' via qubes-users" wrote: > Hi, > > I'm running 4.0 with all current updates. I'm trying to figure out > why I don't get synchronized time anywhere in the system. I have > found various old issues and discussions about similar problems, but >

Re: [qubes-users] wipe released diskspace of a disposable VM's

On Thu, 12 Dec 2019 16:58:41 +0100 "josefh.maier via qubes-users" wrote: > Hello list, > > I heard that a Qubes-user was forced to hand over the Qubes-password, > and that a forensic examiner was able to restore artifacts of a > deleted disposeable form the harddisk... > > Is this story

Re: [qubes-users] Easiest way to redirect USB to a VM?

On Sun, 6 Oct 2019 22:04:05 -0700 (PDT) Guerlan wrote: > I tried to create sys-usb, and my keyboard stopped working. I then > rebooted and couldn t use keyboard to put my LUKS password. I had to > reinstall qubes entirely. > > Is there an easier way to pass USB from dom0 to a VM? I don' t want

Re: [qubes-users] Easiest way to redirect USB to a VM?

e USB from dom0 directly to another VM. I can't create a > sys-usb because I will be left without keyboard > > On Monday, October 7, 2019 at 9:06:50 AM UTC-3, Mike Keehan wrote: > > > > On Sun, 6 Oct 2019 22:04:05 -0700 (PDT) > > Guerlan > wrote: > > >

Re: [qubes-users] Obtaining genuine Qubos installer

On 3/5/20 2:40 PM, Mark Fernandes wrote: On Thu, 5 Mar 2020 at 13:30, Mike Keehan <mailto:m...@keehan.net>> wrote: On 3/5/20 12:31 PM, Mark Fernandes wrote: > I want to get a genuine copy of Qubos, from here in the UK (United Kingdom). > > The

Re: [qubes-users] No boot after dom0 kernel update

On 2/24/20 7:17 PM, ncmy...@gmail.com wrote: Thank you for your kind attention. I want to make clear that in each case, the new kernel has worked fine once I persuaded my BIOS to boot it. The problem is always that, after each kernel upgrade, the BIOS no longer recognizes any bootable

Fwd: Re: [qubes-users] Re: AppVms being killed on resume due to clock skew too large

Should have replied to the list! Forwarded Message Subject: Re: [qubes-users] Re: AppVms being killed on resume due to clock skew too large Date: Sat, 1 Feb 2020 11:49:29 + From: Mike Keehan To: mmo...@disroot.org On 2/1/20 10:27 AM, mmo...@disroot.org wrote: Same

Re: [qubes-users] Re: AppVms being killed on resume due to clock skew too large

On 1/31/20 1:11 PM, mmo...@disroot.org wrote: Hi everyone! Is anyone experiencing this issue on resume (VMs being killed randomly apparently due to clock skew that generates kernel panic) ?? This is happening very often and it makes suspend useless. I'm using a Lenovo T480s. Any ideas are

Re: [qubes-users] New user - network qubes vms

On 2/4/20 11:26 AM, Douglas Giovani Oechsler wrote: Hello All! How are you? I am starting use Qubes. At my scenario we have PFsense with no DHCP network. Inside qubes how can switch qubes vm internal IP? I am reading official documentation but, still lost about thiis. Please, how can I fix

Re: [qubes-users] Wifi connected but does not work

On 2/20/20 9:20 AM, hazon.sass...@gmail.com wrote: Hi I have a fresh qubes install on my laptop. The wifi is connected and works on other devices but can't ping google and can't open a web page on firefox. What information do you need me to share to you to be able to help me ? Thanks What

Re: [qubes-users] How to set the screensaver to either show keyboard language or not to lock screen ?

On 2/13/20 8:10 PM, A E wrote: tor. 13. feb. 2020 kl. 18.48 skrev Mike Keehan <mailto:m...@keehan.net>>: On 2/13/20 5:27 PM, A E wrote: > tor. 13. feb. 2020 kl. 11.11 skrev A mailto:anneeyr...@gmail.com> > <mailto:anneeyr...@gmail.com <mai

Re: [qubes-users] Grayscale display settings

On Sun, 19 Jan 2020 19:46:58 +0100 max.nichtsodringl...@posteo.de wrote: > Hey there, > > what is the best way to switch my whole display to black and white / > grayscale? > > I found this thread: > https://askubuntu.com/questions/443335/how-can-ubuntu-be-made-grayscale/443346#443346 > > But

Re: [qubes-users] Fedora kernel for VM

On Tue, 14 Jan 2020 03:09:48 -0800 (PST) Asad Manzur wrote: > Hi > I've been searching around but I can't find any documentation on how to > install fedora vanilla kernel for a VM. Can anyone guide me in the correct > direction please. I am wanting to use vanilla Fedora kernel so that I can >

Re: [qubes-users] Fedora kernel for VM

On Tue, 14 Jan 2020 03:09:48 -0800 (PST) Asad Manzur wrote: > Hi > I've been searching around but I can't find any documentation on how to > install fedora vanilla kernel for a VM. Can anyone guide me in the correct > direction please. I am wanting to use vanilla Fedora kernel so that I can >

  1   2   >