[Repeater-Builder] GE Mastr II Power Supply Parts Needed.

Hi to all; I just purchased a GE Mastr II Power Supply and i am in need of the Fuse Holder and Metal Cover. Thank You, Bill N8LXM Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Re: [Repeater-Builder] GE MVS as remote base

Hi Ken, I'll go along with that except ! There is no accessory plug on the MVS that I have. I could use the mic plug for PTT and audio in and volume control pot for the audio out and that leaves the COR. Have any ideas for a COR point ? Bill ---Original Message--- From: Repeater

[Repeater-Builder] GE Mastr II Power Supply.

Hi to all! I have a GE Mastr II Power Supply For Sale! It has the Battery Back-up Kit installed with factory cables. I am in Cleveland, Ohio if someone in the area is interested for pick-up or i can ship! but it is very heavy! Thanks, Bill N8LXM 443.125 Yahoo! Groups Links * To visit your

Re: [Repeater-Builder] GE Custom MVP manual wanted

Hi Andrew; I have a original GE UHF MVP manual for sale, It is in GREAT condition! $25.00 Plus shipping. Thanks, Bill N8LXM kc2eus wrote: I'm looking for a source for a GE Custom MVP manual UHF version. Thanks Andrew KC2EUS / GM1YMI Yahoo! Groups Links Yahoo! Groups

Re: [Repeater-Builder] 1.2 ghz repeater

ICOM! Russ wrote: who makes 1.2 ghz equipment for repeater usage , im drawing a blank and web searches arnt proving helpful either ... Russ N3TIH Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to:

[Repeater-Builder] GE Mastr II Amp. Parts Needed!

I am Looking For GE Mastr II Station Heat Sinks Or Complete Damaged Cages. Please Respond To [EMAIL PROTECTED] Thank You, Bill N8LXM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send

Re: [Repeater-Builder] FOR SALE: GE MASTR II 800/900Mhz PA

Hi Dave; Sorry for the delay, I was called out of town! Do you still have this amp? And is it still $40.00 including shipping? Thanks, Bill PS: Please forward me your PayPal address for payment! Dave wrote: I have a clean GE MASTR II PA for sale: P/N 19D430488G2 Rev D 851 to 870Mhz 35W Has

Re: [Repeater-Builder] Controller Problems

Thanks, I reset the band to 4800 then back to 9600 and all worked great. Thanks to everyone on the list who helped solve my problems. Bill - Original Message - From: Mathew Quaife [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, December 26, 2004 12:10 PM Subject: Re

[Repeater-Builder] Motorola Tone Reeds.

I have a LARGE number of Motorola Tone Reeds for sale. E-Mail me direct with Model number and Frequency needed. Bill N8LXM Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email

[Repeater-Builder] GE Mastr II UHF Amateur Repeater FOR SALE

is on the Air in Cleveland, Ohio on 443.125 / 131.9 PL If Interested Call Bill Sebastian (440) 336-1619 or E-Mail [EMAIL PROTECTED] Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send

[Repeater-Builder] GE Mastr II Station

Hi! Does anyone have repeater conversion info on the newer style GE Mastr II stations with the all in one controller, metering and speaker (19B234871). I have a VHF station I wish to convert but I would like to keep the local station controls, speaker, mic and metering. Thanks! Bill N6YMZ

[Repeater-Builder] Need Help... where can I buy a DSL-Internet repeater...?

I live in a remote area, where I can receive DSL service in my office via phone company, but not in my home (which is about 2 miles away). Is there something I can buy to send DSL wireless signal to my house?? Thanks, Bill in Mexico

[Repeater-Builder] Mastr II Station Power Supply Problem?

power supply for the station. I don't have my spectrum analyzer at the moment so I can't tell if the power amp is spurring although station metering shows below rated current on transmit. Any clues? Bill...

Re: [Repeater-Builder] GE Tone module needed

Hi John; I may have it. I will check and get back to you. Bill N8LXM John J. Riddell [EMAIL PROTECTED] wrote:I'm looking for a couple of 131.8 HZ , part number PL19B205280-G14 GE tone module's for a GE Exec or Mastr Pro. These are the red modules with a 7 pin plug on one end

RE: [Repeater-Builder] looking for stuph.....???!?!?!?!?

Hi Mark; I know of someone that has several 900 MHz duplexers. I believe he has a rack mount TX RX. I will check with him and get back to you if you are interested. Bill N8LXM n9wys [EMAIL PROTECTED] wrote: Hey Ted!! Yes, I am looking for some stuph, as a matter of fact... Might you

Re: [Repeater-Builder] GE Mastr II UHF Complete PLL Repeater For Sale!

Hi Group; Sorry I forgot to add that I am in the Cleveland, Ohio area. Thanks, Bill N8LXM George Henry [EMAIL PROTECTED] wrote: QRZ says that Bill is in Cleveland 73, George, KA3HSW / WQGJ413 --- Mike Morris WA6ILQ [EMAIL PROTECTED] wrote: At 08:09 PM 07/15/08, you wrote

Re: [Repeater-Builder] Mastr II Channel Guard

Hi Joe; I had the same problem and found the the dipswitch module was bad. We found another module and it worked great. Check each switch with a VOM. Bill N8LXM kb5vjy [EMAIL PROTECTED] wrote: Small problem that I'm sure will bring out a chuckle to the experienced repeater builders

[Repeater-Builder] Hum on MSR200 Receiver

is 3364. Any input would be helpful. Jim K5VPW monitors the machine and runs the IRLP node so he may be listening and is willing to assist. Bill N5ZTW

[Repeater-Builder] MSR2000 Hum solved

I re-seated the Squelch Gate board. Problem gone. I wish they were all this easy. Thanks for all the advice. Bill N5ZTW

[Repeater-Builder] Micor TPN1110 Filter Cap replacement.

them installing new smaller sized ones from the top without major machine shop work or soldering with open flame? Are there any tricks out there? Bill N5ZTW

[Repeater-Builder] Re: msf5000 trip alarms

Need more info about which unit and what alarms. . bill --- In Repeater-Builder@yahoogroups.com, gueorgui g gueor...@... wrote: does anybody know how to adjust the msf5000 trip alarms trough the software?

[Repeater-Builder] Quantar-Nuc paging transmitter GURU

out of them. I know I know wheels have already been invented. Bill . w4oo . atlanta .

[Repeater-Builder] Quantar-Nuc paging transmitter GURU

out of them. I know I know wheels have already been invented. Bill . w4oo . atlanta .

[Repeater-Builder] Re: MSF-5000 VCO problem

There was a guy at the stone mtn hamfest with several for 10.00... I think he is in the atlanta area...wb9dbd I think. . bill . --- In Repeater-Builder@yahoogroups.com, hl31943 hles...@... wrote: I have a CXB UHF repeater and can't get the receive VCO to lock properly. I get

[Repeater-Builder] Re: Motorola Spectra 900's

. . Bill w4oo jawjabill-- bellsouth- net . --- In Repeater-Builder@yahoogroups.com, James Adkins adkins.ja...@... wrote: I've done quite a bit with the Spectras; hacked the software, re-tuned the VCO after modifying, re-capped them, etc. I think they're great radios. Just thought since it's difficult

[Repeater-Builder] Re: Motorola Spectra 900's

standard or ham units. The rx front end is the worst and most time consuming part because of it's tuning requirements. And after reading you qrz history, Mike, I plan to reincarnate as a butterfly so I may follow you as you enjoy life. . Bill w4oo . --- In Repeater-Builder@yahoogroups.com, Mike

[Repeater-Builder] Re: MSF5000 internal 14.4MHz osc.

operate at 15 to 18 volts. . bill atlanta . --- In Repeater-Builder@yahoogroups.com, sjs1005 sjs1...@... wrote: Hello all, I hope someone can help me out with a couple of msf5000s (UHF r3) I brought these 2nd hand from a govt department, thay are in good order. They are the CXB type

[Repeater-Builder] Re: Motorola Spectra 900's

i plan for a quantar cage to msf vhf 350 watt pa (quantro idea). Could be entertaining. . bill w4oo . --- In Repeater-Builder@yahoogroups.com, James Adkins adkins.ja...@... wrote: Which brings up another interesting question: We are already using a 75w MSF-5000. Could a Motorola Nucleus II

[Repeater-Builder] Re: Motorola Spectra 900's

Well, you have me curious also, maybe I took the dark path for tuning the front end filters. I had to resort to silver paint (not cheap), a grinder, and a little blood and guts to tune those puppies. What's your story.. . bill w4oo . . --- In Repeater-Builder@yahoogroups.com, Mel Swanberg

[Repeater-Builder] Re: Motorola Spectra 900's

opportunities, now I sound like a politician. I now shoot weddings hoping for a few pennies. The spectra also has a plug in module, no depotting required. . . jawjabillatl---bellsouth--net . bill . --- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ wa6...@... wrote: At 07:41 PM 11/22/09

[Repeater-Builder] Re: Motorola Spectra 900's

You and I need to talk (I type too slow). I too have wanted a spectra on 220 mhz. Had not thought about the 1 pf cap trick. . bill . jawjabillatl---bellsouth---net . . --- In Repeater-Builder@yahoogroups.com, Mel Swanberg wa6...@... wrote: Well, maybe I've actually managed to do something

[Repeater-Builder] WTB Motorola VHF Quantar repeater

I am looking to buy a quantar in either vhf range...p-25 working condition. Willing to spend up to $1900.00. I heard there were some selling at $1800.00 but do not know where or who is selling. Thanks Bill in Atlanta 404 325-8992 jawjabillatl at bellsouth dott net . .

[Repeater-Builder] TFC-6030a Motorola receive module from Nucleus paging transmitter

. Bill w4oo .

[Repeater-Builder] Re: FS: Speaking of 200 watts on a repeater transmitter.....

You say the amp was retuned,,are there tuning caps or how was it retuned and do you know if the Glenayre vhf amps are the same way of retuning to ham freqs. . thanks . Bill . --- In Repeater-Builder@yahoogroups.com, Ken Arck ah...@... wrote: I have for sale a Glenayre Series 90 250 watt

[Repeater-Builder] Re: D-Star Was: Molotora Gontor

proof before tackling the varables of installation. The hardware (and firmware) seems only now taking the quantum leaf out of betaville. I am watching with baited breath.. . Bill Atlanta w4oo . . --- In Repeater-Builder@yahoogroups.com, Doug Bade k...@... wrote: I would be glad

[Repeater-Builder] Re: 220 equipment

on the Mississippi River. Where are you located... . Bill Atlanta w4oo . . . . --- In Repeater-Builder@yahoogroups.com, NORM KNAPP nkn...@... wrote: I came across some 220mhz equipment and was wondering if it was good for anything... I got 3 Intech Incorporated COM 218 repeaters (?). Are these ACSB

[Repeater-Builder] Re: 220 equipment

They are useable for ham IF they are what I think you have described..The synth must be reverse engineered to get to ham freqs... I have begun this but not finished.we should talk offline... . bill --- In Repeater-Builder@yahoogroups.com, NORM KNAPP nkn...@... wrote

[Repeater-Builder] Re: 220 equipment

Yes, I definatly want them, just thinking of ways to get together with the units . Bill Atlanta . . . . --- In Repeater-Builder@yahoogroups.com, NORM KNAPP nkn...@... wrote: I have (had) 4 if them. I was going to give them to Bill in Atlanta. I have not yet. I don't know

[Repeater-Builder] Re: Help Identifying a Motorola PA

It appears to be the 25 watt driver pa to the 350 watt pa in purc and msf5000 vhf base and repeaters... . . bill atlanta . . . --- In Repeater-Builder@yahoogroups.com, nativeMT kc7...@... wrote: The number on the yellow sticker is: TRN7088a200b8 --- In Repeater-Builder

[Repeater-Builder] Re: MSF-5000 information needed

the llpa to a given power out. . . Bill Atlanta . . . . --- In Repeater-Builder@yahoogroups.com, Ralph S. Turk w7...@... wrote: Looking for more information on the Control Head. I have several CXB's without PA's. I will be using a Micor PA with external circulator. Looking for information

[Repeater-Builder] Re: Low Band Syntor X9000

jawjabillatl at bellsouth dot net I sent you an email--- some arrive --- some don't bill . . --- In Repeater-Builder@yahoogroups.com, JOHN MACKEY jmac...@... wrote: Is there anyone in the group who is familar with Low band Syntor X 9000 radios? I would like to go off line in e

[Repeater-Builder] Re: Moving a MSF5000 from 800 to 900 Ham

I have move the800 mhz chunk to 900 ham operation wide dev. I have not had time to test the pa's to see how happy they can be tricked to efficient operation. The chunk is the easy part, getting those 150 and 75 watt 800 pa's may result in a lot of hair on the floor. . Bill Atlanta

[Repeater-Builder] Re: Moving a MSF5000 from 800 to 900 Ham

to tackle this project I will work with you from afar. . Bill Atlanta --- In Repeater-Builder@yahoogroups.com, Mark n9...@... wrote: Don't think it'll go that far... the articles at R-B will tell you for certain. I guess the easiest way is to read the station programming and see where it is now

[Repeater-Builder] Re: Dissasembly of msr 2000 continuous duty amp. How?

.. don't touch it with fingers or arms. This technique also lowers possibility of cracking the ceramics. I usually lay out everything that has to be done in advance with extra planning. Hey, I didn't say it was going to be quick... . Bill Atlanta . . --- In Repeater-Builder@yahoogroups.com, wd8chl

[Repeater-Builder] Re: UHF Isolator Wanted

How many do you needI have several to handle up to 300 watts in a triple config with 300 watt dummy loads . bill w4oo . --- In Repeater-Builder@yahoogroups.com, K5IN k...@... wrote: Ok, one last try. I need a UHF isolator and thought I would ask here again. Brian, K5IN

[Repeater-Builder] Re: Msf5000 Low Power alarms

Ok, I'll ask the easy question, why not let it be happy with the proper input to the sscb input for the pa...I think it may be only one wire. . bill w4oo . . --- In Repeater-Builder@yahoogroups.com, jimmylpowell jpow...@... wrote: I originally posted this on the MSF5000 board

[Repeater-Builder] Re: Unidentified part in msf5000 vhf station

My guess is that it is the harmonic filter, with the left coax leading to the pa or circulator if it has one... . bill w4oo . . --- In Repeater-Builder@yahoogroups.com, wb5oxq wb5...@... wrote: I just aquired a second msf5000 to make a 2 meter repeater our of and it has a part

Re: [Repeater-Builder] NOAA Weater alerts

Alerts. It's just that I feel the current rules prohibit that practice. As the Co-chair of the southern NV, Inyo County CA Emergency alert committee (Las Vegas Area), and co-vice chair for the State of NV committee, I'd love to see more ways for the alerts to get out. But Legally Bill Croghan

Re: [[Repeater-Builder] Ever so slightly off topic ... but ...]

So how come we don't have a yahoo group for the exchange of crystals and channel elements? BillWB0KSW - Original Message - From: JOHN MACKEY [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 16, 2003 1:43 PM Subject: Re: [[Repeater-Builder] Ever so

Re: [Repeater-Builder] Off topic questions

no longer use the reel to reels, you might find some of the plugs in the local radio station's junk boxes. Can't hurt to ask. I'll check my junk boxes at work Monday. Bill Croghan, CPBE, WB0KSW Chief Engineer, KOMP/KXPT/KENO/KBAD Lotus Broadcasting, Las Vegas, NV - Original Message - From

Re: [Repeater-Builder] Fuses on power cords

Hi budd, Another thought, when I was in Tucson, My brother in law was helping me jump start my Jeep one day, and before I could get my radios turned off, he attached the jumpers backwards. A fuse in the negative lead, might have saved the three radios he smoked that day! Bill WB0KSW

Re: [Repeater-Builder] Re: Z Matcher

Here's that repeater group I get so much info from. Bill http://groups.yahoo.com/group/Repeater-Builder/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED

[Repeater-Builder] RE: [Repeater-Builder}GROL

look at such things as EMT's, HAZMAT Responders, and various non electronics certificates to show a well rounded person willing to go to the trouble of learning skills. Bill Croghan WB0KSW GROL, CPBE etc. Chief Engineer, Lotus Broadcasting, Las Vegas KOMP/KENO/KXPT/KBAD Lt. Col. CAP Las Vegas, NV

[Repeater-Builder] Experiences With Link At 927-928

monitors? Wireless cameras? Whatever? Thanks in advance, Bill - WB1GOT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups

[Repeater-Builder] Remote Receiver PL

. Central site selectively passes remote audio based on presence of PL signal to the voter. Is there an accepted / commercial solution or will this become a project? Thanks in advance, Bill - WB1GOT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group

[Repeater-Builder] Ferritronics Controller

I have a Ferritronics RP03 controller and I'm looking for a diagram for hookup and the controller inside. It has a rs232 on the back and have no idea what it does. Any info would be great Cheers BillVE3BNW _The Ham Technet www.hamtechnet.com The Ham

[Repeater-Builder] Help Identifying a Motorola FM Radio

. The receiver is all solid state, the transmitter is solid state except a 7551 driver and a 5894 final. I believe the is a low-band VHF set which can be converted to 10 meters? 73, Bill, NJ7P Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group

[Repeater-Builder] Re: Help! Need information

Subject: Help! Need information Tony, You can download both the user and service manuals from the Alinco web site: http://www.alinco.com/pdf.files/Instruction/dr135_435ins.pdf http://www.alinco.com/pdf.files/Service/dr135_235_435ser.pdf Bill - WB1GOT I'm in need of some help. I have ordered

Re: [Repeater-Builder] Digest Number 2996

: 3RP1A - $30.00 plus shipping: 1-5 tubes $5.00 Great on the fone, great and spdy service. Bill - WB1GOT Message: 19 Date: Sun, 27 Feb 2005 21:48:41 - From: hwingate [EMAIL PROTECTED] Subject: OT- Cushman CE5 The CRT display in my old CE5 has gotten

Re: [Repeater-Builder] Digest Number 2997

When the time comes, there will be LEDs going in and NOT light bulbs. They're nice units and VERY repairable but I swear that Cushman must have employed elves on the assembly line and had a sadist as the engineer. Bill - WB1GOT Message: 7 Date: Sun, 27 Feb 2005 17:55:25 -0800

[Repeater-Builder] OT- SM Scope Tubes

RECOMMEND calling Roy Rogalski at Radio Electric Supply http://vacuumtubes.net Bill - WB1GOT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED

[Repeater-Builder] E.F. Johnson LP Repeater

- 461.7625Mhz. Am wanting to convert this unit to Amateur operation in the 440 band. Does anyone have any experience working with this device? Any tips would be appreciated. Regards; -- Bill Cole KG4CXY Carolina Helping Hams www.hampublicservice.org

[Repeater-Builder] Johnson LPI System

Greetings; Looking for the Programming Interface Cables/software/adapter for a Johnson LPI Repeater 242-3450-105. Any tip would be appreciated. Regards; Bill Cole KG4CXY Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder

[Repeater-Builder] Re: IOTA Switched Power Supply and Noise?

. Second best $$ I ever invested. Bill - WB1GOT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http

[Repeater-Builder] Sinclair Duplexer Replacement Capacitor

the capacitance range / voltage its a little difficult to guess. The manual says nothing and Sinclair does not answer emails and so far has been inpenetrable as far as phone calls. Any help you can give would be much appreciated. 73 de Bill WB0VHW Yahoo! Groups Links * To visit your

[Repeater-Builder] 900 mhz question

Looking for info on building a 900 mhz ham repeater. Bill N2XKO Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups

[Repeater-Builder] Mount on the Flat Side?

structures and then, over 5' away. And, of course, I'd very much like the pattern to be as omni as possible. Perhaps I need to find someone to model this for me. Bill - WB1GOT Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder

Re: [Repeater-Builder] Digest Number 3626

value (don't remember) cap to provide just a touch ( 1 sec) of hang. Bill - WB1GOT On 19 Feb 2006 22:53:03 -, you wrote: Message: 5 Date: Sun, 19 Feb 2006 11:41:08 -0500 From: [EMAIL PROTECTED] Subject: RE: Alinco Ham Repeater?? Should be simple. RX audio out, TX Audio

[Repeater-Builder] Johnson LPI Repeater

Greetings; Looking to buy the Remote Programming Interface and Programming Cable for an EF Johnson LPI Repeater 242-3450-105. Please reply direct. Thanks! Regards; -- Bill Cole KG4CXY Carolina Helping Hams www.hampublicservice.org Yahoo! Groups Links * To visit your group

[Repeater-Builder] Re: service and parts manual for IFR 1100S

www.yourmanualsource.com. I rented it for a week for $25, copied the 8-1/2 x 11 pages myself and took the foldouts (50 or so?) to officemax. I ended up with quite a bit of labor and near $80 into the whole process but it was better than the $250 or so the manuals were going for on ebay at the time. 73 de Bill

[Repeater-Builder] Re: how to build a very simple repeater controller

I'm very happy with the ID-O-Matic - hard to beat for $20! http://www.hamgadgets.com/product_info.php?products_id=64 Bill - WB1GOT --- In Repeater-Builder@yahoogroups.com, skipp025 [EMAIL PROTECTED] wrote: Re: how to build a very simple repeater controller How about using good ol' op

[Repeater-Builder] 4W EM Remote

and consolodate the current mess into something simple. Ideally, I can hack together a simple pushbutton operated panel: push to select a particular repeater. Think of the old office phones. Anyone out there doing this? Suggestions? Traps? Thanks in advance, Bill - WB1GOT

[Repeater-Builder] Re: 4W EM Remote

repeaters and 2 remote base stations. I'm also looking at the possibility of remoting packet as well. Bill - WB1GOT I'll maintain backup access via radios but they'll be shared with other use and no longer dedicated to repeater operations. 3) --- In Repeater-Builder@yahoogroups.com, Mike Morris

[Repeater-Builder] Re: 4W EM Remote

remote PTT). Sounds like another job for a good old relay! After 35 years with ATT, you would have thought I would have remembered my roots all by myself. Thanks! Bill - WB1GOT --- In Repeater-Builder@yahoogroups.com, Jim B. [EMAIL PROTECTED] wrote: Bill Powell wrote: I have an opportunity

[Repeater-Builder] Re: 4W EM Remote

in-place and available for re-use - 1 0r 2 possibly for RACES. Bp --- In Repeater-Builder@yahoogroups.com, Ryan [EMAIL PROTECTED] wrote: Your DMR are they simulcast with EM option ? if your county can flip the bill why not do a simulcast system. www.simulcastsolutions.com use one rpt pair

RE: [Repeater-Builder] GE Mastr II Station

and will your mod's still work with this setup? Regards, Bill... -Original message- From: Ralph Hogan [EMAIL PROTECTED] Date: Wed, 20 Dec 2006 16:19:46 -0800 To: Repeater-Builder@yahoogroups.com Subject: [Spam] RE: [Repeater-Builder] GE Mastr II Station Hey Bill, I pull one

[Repeater-Builder] Re: audio equalizers for repeater audio

) | | 0 ground The .2 uf capacitor takes the highs to ground. Some people like to use a 6.8K series resistor, but a 15K provides perfect roll off on highs. Play with this value if you want to tweak it. Bill Hudson W6CBS

[Repeater-Builder] Re: audio equalizers for repeater audio

components, and how I chose to de-emphasize radios, of all manufacturers. Right or wrong, I make it my standard. The nice thing about standards is that there are so many to choose from! Bill Hudson W6CBS BEGIN:VCARD VERSION:2.1 N:;W6CBS FN:W6CBS ORG:Hudson Sports Productions

RE: [Repeater-Builder] Re: audio equalizers for repeater audio

Good description Eric Bill - W6CBS _ From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon Sent: Saturday, December 30, 2006 4:18 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Re: audio equalizers for repeater

RE: [Repeater-Builder] Re: audio equalizers for repeater audio-circuit correct??

before, after, or splitting them with 7.5K resistors on both sides, I will send you a crisp one hundred dollar bill ($100) in the mail. I've never done it - but where I went to school, it shouldn't matter. Let us all know what you find. If you find a difference, I'll send you $100. Of course

RE: [Repeater-Builder] Re: audio equalizers for repeater audio-circuit correct??

@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Doug Zastrow Sent: Saturday, December 30, 2006 6:23 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: audio equalizers for repeater audio-circuit correct?? Bill, What source and load impedance are you looking

[Repeater-Builder] audio equalizers for repeater audio-circuit correct??

of the circuit, either before, after, or (I added this opportunity) even split into two resistors, makes a difference in the EQ output like they say, Ken get's a crisp $100 bill. The slope of the De/Pre-Emphasis isn't what is important here, as that won't change in a 2 component circuit, what

[Repeater-Builder] MSR-2000 Help.

card. We have tried multiple combinations with no luck. Thanks, Bill W4RVN

[Repeater-Builder] MSR200 Edge connectors

Does anyone have the cross reference or part numbers and a source for the PCB edge connectors on MSR2000 Repeater control cards, SQL Gate, etc. (PN 9-83497F01)? Thanks in advance! ..Bill - W4RVN

RE: [Repeater-Builder] Hand Held radios as repeaters

Check this out. This may be of help. http://www.arrowantennas.com/uconrtoller.html Bill Bill Collins KG4BKO EC Toombs County [EMAIL PROTECTED] http://home.cybersouth.com/wdcollins Vidalia, GA 146.625(-) 442.500(+)88.5 - --- [This E-mail scanned for viruses by your Internet Service

RE: [Repeater-Builder] Glenayre 900 MHz T8500

The F connector is a satellite dish input for satellite control and data input for the synchronization, delay, and control of the transmitter. CBS Bill W6CBS _ From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of N9WYS Sent: Wednesday, January

RE: [Repeater-Builder] FCC Test/Tower fall

Here it is http://www.youtube.com/watch?v=Iac1xt0dMx4 http://www.youtube.com/watch?v=Iac1xt0dMx4NR NR CBS Bill W6CBS _ From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of WD7F - John in Tucson Sent: Thursday, February 01, 2007 2:43 PM

RE: [Repeater-Builder] Mastr II Station Power Supply Problem?

. Bill Hudson W6CBS Subject: RE: [Repeater-Builder] Mastr II Station Power Supply Problem? I'm setting up a Mastr II VHF station for a 2 meter repeater and when I got to the power amp to check everything I can only get about 86 watts . . . BEGIN:VCARD VERSION:2.1 N:;W6CBS FN:W6CBS

[Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem?

Hi Jeff! Thanks for the reply. The no load voltage is about 14.1 volts. Bill... -Original message- From: Jeff DePolo [EMAIL PROTECTED] Date: Mon, 05 Feb 2007 16:28:07 -0800 To: Repeater-Builder@yahoogroups.com Subject: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem

[Spam] Re: [Repeater-Builder] Mastr II Station Power Supply Problem?

PROTECTED] Date: Mon, 05 Feb 2007 22:14:09 -0800 To: Repeater-Builder@yahoogroups.com Subject: [Spam] Re: [Repeater-Builder] Mastr II Station Power Supply Problem? On 2/5/07, Bill Hudson [EMAIL PROTECTED] wrote: If you have the high current model, it has a BUSS NON-35 AMP one-time FUSE (Class

RE: [Repeater-Builder] HF Remote Base?

-comm.com/wiki/index.php?title=Remote_Base_Kenwood_TS-2000 That's all the help I can give. Most folks do not believe I'm talking on a UHF handie talkie - the audio is that good. Tell me if you want a demo. I'll fire it up and talk to you anywhere you want. Bill Hudson W6CBS

RE: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem?

on the higher range but then again unknown capacitance. Anyone know where I can get a new cap like this?? Bill... -Original message- From: Jeff DePolo [EMAIL PROTECTED] Date: Mon, 05 Feb 2007 22:12:09 -0800 To: Repeater-Builder@yahoogroups.com Subject: RE: [Spam] RE: [Repeater-Builder] Mastr II

RE: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem?

I found a 7uf 660vac from Allied part no #591-7040 will that work? -Original message- From: Jeff DePolo [EMAIL PROTECTED] Date: Fri, 09 Feb 2007 16:18:00 -0800 To: Repeater-Builder@yahoogroups.com Subject: RE: [Spam] RE: [Repeater-Builder] Mastr II Station Power Supply Problem? I'm

[Repeater-Builder] MSF-5000 external PA

Has anyone interfaced a PA other than a MSF5000 PA to a MSF5000 CXB? What is required? Will a MSR2000 VHF PA work? What are the connections needed? Where can teh connections be tapped? Thanks, Bill -W4RVN

[Repeater-Builder] Re: Looking for Info on EF Johnson LR-MT-22 220-222 MHz Radios

Nope - Moto makes FM mobiles and handhelds. Have an HT1250-LS+ (H25MDF4) I'm tryinig to move up into the ham bands. Is a narrow band FM unit but CPS says the upper band limit is 216 and nobody knows how to move it up - or isn't saying how. . . Bill - WB1GOT --- In Repeater-Builder

Re: [Repeater-Builder] MSF5000 help? (hey, it's a repeater, right?)

the voltage in. Hope This helps. *** As a note I have the VHF CXB version. Note sure if there is a difference in function from the UHF version. ...Bill Ken Arck wrote: Can anyone give me a hand with some preliminary questions regarding a UHF repeater (still waiting - after a week

RE: [Repeater-Builder] Re: Replacement of an older Repeater

I remember the 7 year support rule too, but I don’t know why… Bill From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of N9WYS Sent: Saturday, April 14, 2007 8:35 PM To: [EMAIL PROTECTED] Subject: RE: [Repeater-Builder] Re: Replacement

RE: [Repeater-Builder] Spectrum Communications RUN! Don't WALK!

Does anyone know about Spectrum Communications? Joel ~ RUN - and get your money back quickly. Do not walk. BEGIN:VCARD VERSION:2.1 N:;W6CBS FN:W6CBS ORG:Hudson Sports Productions TITLE:Broadcast Engineer TEL;WORK;VOICE:1-650-595-5566 TEL;PREF:1-650-595-5566

RE: [Repeater-Builder] Re: Spectrum Communications

Did I miss it - or has anybody asked him what band he wants this receiver on ? CBS Bill ___ BEGIN:VCARD VERSION:2.1 N:;W6CBS FN:W6CBS ORG:Hudson Sports Productions TITLE:Broadcast Engineer TEL;WORK;VOICE:1-650-595-5566 TEL;PREF:1-650-595-5566 ADR;WORK:;1-650-595-5566;P O Box

[Repeater-Builder] Re: 3 minute timeout. FCC regulation or myth

communications or signals, or transmit as the station call sign, any call sign not authorized to the station. Nothing about timeout though. Perhaps a friendly E-Mail to Riley asking if he'd bust you for it? In any event, a 3 minute time out timer is simply good practice and might save an expen$ive final. Bill

  1   2   3   >