[Repeater-Builder] Glenayre 900 MHz T8500

2007-01-31 Thread N9WYS
Well, gang, I brought this puppy home today! Even has a "receiver" in the cabinet, but I'm not sure just WHAT kind of receiver it is. There are **two** antenna connections on left side of the cabinet: One is a 50-ohm "N" connection which I assume is the transmitter output. The other appears

RE: [Repeater-Builder] Glenayre 900 MHz T8500

2007-01-31 Thread N9WYS
#x27;m meeting another ham tomorrow who says he has some of the bibles on this monster. Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Mike Morris The "F" connector is probably for the cable from the LNA on a satellite dish antenna. Many pa

RE: [Repeater-Builder] Re: New article on Channel Element/ICOM stability - W3KKC

2007-02-03 Thread N9WYS
Neither would I... I've used them several times in the past year to re-rock some UHF Motorola elements, and I have no complaints at all. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Fred Flowers I don't remember Dave's probl

RE: [Repeater-Builder] Where to send Cushman service monitors for repair?

2007-02-07 Thread N9WYS
r and calibrate the service monitors for the guys at my county's radio lab, along with those of the local Motorola repair shop... Their ad in the 01/07 issue of "Mission Critical Communications" (Page 205) says: "NEW LOWER RATES" Mark - N9WYS -Original Messa

RE: [Repeater-Builder] Statistics

2007-02-15 Thread N9WYS
m every so often, and with having subscriptions to over 40 groups, it's a real PITA to go in and reset each one after "un-bouncing" my address. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Mike Morris WA6ILQ Recently I did some r

RE: [Repeater-Builder] Antenna cleaning solvent ???

2007-02-15 Thread N9WYS
before you use this product. It is a liquid, and MAY seep between items. I do not know whether this product could cause the parts to become insulated from each other. might want to contact the manufacturer before with questions. 73! Mark - N9WYS _ From: Repeater-Builder@yahoogroup

RE: [Repeater-Builder] Re: 2M Power Amp

2007-02-15 Thread N9WYS
FWIW - I have a Crescend UHF PA in operation on my 444.550 machine with absolutely NO complaints. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Jim B. Maire-Radios wrote: > Well I think there are 8 or 9 Vocom/Cresend amps I have in service > a

RE: [Repeater-Builder] Statistics

2007-02-19 Thread N9WYS
material, and I actually LEARN from the posts. (When I feel I have a little information of worth, I contribute also...) Congratulations to Mike and all who own/administer this group. 3400 members says a LOT about your efforts!! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@ya

RE: [Repeater-Builder] Repeater Time Out Award

2007-02-19 Thread N9WYS
is was presented at their annual awards banquet... Needless to say the incident - or any similar - was not repeated for quite some time. ;-) Mark - N9WYS

RE: [Repeater-Builder] Re: Antenna gain specs

2007-02-19 Thread N9WYS
... gain vs Isotrpoic or gain vs Dipole. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Laryn Lohman Yup, Paul, you've caught on. Diamond must be good; very good. They've bent the laws of physics again. Diamond's 18 ft. long antenna

RE: [Repeater-Builder] Repeater Time Out Award

2007-02-19 Thread N9WYS
I got 138,000 results when I Googled "Purple Crystal"... "Purple Xtal" came back with 0 (zero). Most were about jewelry. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] > "Jim B." wrote: > Loo

RE: [Repeater-Builder] Wanted: Mitrek channel elements (UHF)

2007-02-28 Thread N9WYS
George, I have a KXN1086 on what appears to be 47x.8625. (Can't tell the exact freq - the label is pretty beat-up). If this is of any use to you, it's yours for the asking... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of George Henry Sen

RE: [Repeater-Builder] Wanted: Mitrek channel elements (UHF)

2007-03-04 Thread N9WYS
OK - no sweat. Just figured I'd offer it to you if you could use it... Good luck with your project! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of George Henry Thanks. Turns out one of the guys in the local ham club had a box of them i

RE: [Repeater-Builder] Re: A Daily Laugh

2007-03-06 Thread N9WYS
My question exactly. ;-) BTW - Does he yell "Yabba-Dabba-Do!" ? Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Jim B. Stephen Reynolds wrote: > On the North Fulton ARS Repeater (145.47) in North Atlanta we have > Fred Flintstone an

RE: [Repeater-Builder] Antenna Mounting Question

2007-03-06 Thread N9WYS
on for investigation. I'm sure there are others here more familiar with the construction of the antenna, and will offer their suggestions. 73 de Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Jamey Wright I'm sure this has been covered here before bu

RE: [Repeater-Builder] Another TKR-820 Question

2007-03-08 Thread N9WYS
To paraphrase a hymn; "Go put it on the mountain!" Maybe you have the ultimate critic's approval! Sorry - I just couldn't resist. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of WD7F - John in Tucson snip If it

RE: [Repeater-Builder] Re: Micor receiver below 440?

2007-03-12 Thread N9WYS
. but then I'd need to fix the Frankfort one anyway, if I get the opportunity to install a RX in Crete at Jay's tower... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Chris Huber Sent: Monday, March 12, 2007 12:01 PM To: Repeater-Builder@

RE: [Repeater-Builder] Re: Micor receiver below 440?

2007-03-12 Thread N9WYS
Sorry - this was supposed to go direct to someone else... But I will accept any replies on-list. I have a Micor RX that is half deaf... Sensitivity about .6 or .7 µv at 449.550. I've re-tuned this thing until I'm blue in the face. Mark - N9WYS -Original Message- From

RE: [Repeater-Builder] Re: Flat Audio

2007-03-14 Thread N9WYS
at if I provided him with repeater output audio direct-wired through Sennheiser studio-quality headphones that he'd still complain. Let him try HF SSB just once... For now... 73 de Mark - N9WYS (Also GROL) -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of mc

RE: [Repeater-Builder] Repeater Controller Recommendations

2007-03-19 Thread N9WYS
’t been able to determine that via the manual…) Mark – N9WYS Repeater Trustee, WW9AE/R (444.550 PL114.8) _ From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] Question for the gurus: I am tuning up and donating an E.F. Johnson CR1100 repeater to the local Ham

RE: [Repeater-Builder] Re: Moto GM300's Used With External Controller - Blank Frequency Entry

2007-03-21 Thread N9WYS
help your situation, but it sounds like you were doing what you needed to. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of skipp025 While you guys are on the subject of Motorola Mobile Radios made into repeaters... The factory frequency programm

RE: [Repeater-Builder] LMR feedline revisited and revised!

2007-03-22 Thread N9WYS
s for cars...) Of course this process won’t work with PL-259s, but I thought I'd add my 1.5¢ worth to the discussion... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of DCFluX The only real way to bond aluminum is with a TIG welder. And when you ge

RE: [Repeater-Builder] LMR feedline revisited and revised!

2007-03-22 Thread N9WYS
True, but I don't think she was constant impedance, either... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Fred Flowers I think she could take any size pin. Fred Sorry couldn't resist. -Original Message- From: Repeat

RE: [Repeater-Builder] MSF5000 Manual

2007-03-24 Thread N9WYS
Dan, For the most part, they pop up from time to time on e-Pay. I can't say whether some of the prices (Buy It Now) are good or not. Also - have you tried Motorola parts? I don't know whether they are NLA from the factory. Mark - N9WYS _ From: Repeat

RE: [Repeater-Builder] Repeater Builder language

2007-03-25 Thread N9WYS
Easy, Fred - you'll stroke out. Hehehehe Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Fred Flowers BECAUSE IT'S A PAIN IN THE ASS TO READ. Fred N4GER Have a nice day.

RE: [Repeater-Builder] OT- Motorola NTN4633B Charger for NiMH batteries

2007-03-28 Thread N9WYS
Bob, I just bought 2 NiMH batteries for my MT1000's... Same packs (and probably the same charger) as yours. Once you've completed the engineering, could I impose upon you for a copy? No sense in both of us chasing the same rabbit. Thanks! Mark - N9WYS -Original Message

RE: [Repeater-Builder] Re: OT- Motorola NTN4633B Charger for NiMH batteries

2007-03-28 Thread N9WYS
Thank you, Sir!! Much appreciated! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of sgreact47 No need to "chase the same rabbit" I allready caught him!! Problem is the tempature VS resistance curve of the thermistor in the Non O

RE: [Repeater-Builder] 2 Micor Uhf receivers to trade

2007-03-28 Thread N9WYS
Gervais, Is the receiver you're looking for low band or high band VHF? I have a low band VHF receiver (39 MHz) that I'd gladly exchange for your UHF ones... I'm using a SpectraTAC system with remote UHF receivers, so I can always use receiver boards on UHF. 73 de Mark - N9WYS

RE: [Repeater-Builder] Re: OT: anyone a member of the MSF5000 group?

2007-03-30 Thread N9WYS
whatever reason - to become a member of said group. Sorry for the tirade/rant. This subject struck a sensitive chord with me. I also apologize to this group's moderator for my off-topic comments. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Doug W

RE: [Repeater-Builder] 2 Micor Uhf receivers to trade

2007-04-02 Thread N9WYS
OK, Gervais Looks like what I have is not what you need... Best luck on getting your repeater going! 73 de Mark – N9WYS From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of va2dq Mark thanks for your reply, i received 3

RE: [Repeater-Builder] Poor Mans Repeater Project anyone?

2007-04-11 Thread N9WYS
) employing a different mobile unit, certainly! I'd just hate to reinvent the wheel. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of KD5SFA Sounds like fun to me. In fact I've been tasked to help with just that sort of thing for a group. Prob

RE: [Repeater-Builder] Poor Mans Repeater Project anyone?

2007-04-12 Thread N9WYS
ue to rise... 73 de Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of Nate Duehr On 4/11/07, skipp025 <[EMAIL PROTECTED]> wrote: > Re: Poor Mans Repeater Project anyone? I'd be interested in reading along and learning, but I'm not sure how much I c

RE: [Repeater-Builder] Poor Mans Repeater Project anyone?

2007-04-12 Thread N9WYS
Wouldn't that be: /KT/R, /AG/R AND /AE/R ??? Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of DCFluX They will have to identify with /KT, /AG, and /AE accordingly. On 4/11/07, Ken Arck <[EMAIL PROTECTED]> wrote: > At 03:50 PM 4/11/2007, you wrote: >

RE: [Repeater-Builder] Re: Zetron - Kenwood???

2007-04-13 Thread N9WYS
I was thinking more along the lines of ZEN-WOOD. U... U... There - I'm SO mellow now ;-p Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of Mike Morris WA6ILQ Kenwood buying Zetron? <http://www.eetimes.com/news/latest/showArtic

RE: [Repeater-Builder] Re: Mastr II mobile in repeater service Noise in receiver

2007-04-14 Thread N9WYS
nk the peace of mind was worth the added expense. Just my 2¢ worth... 73 de Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of Dan I find this very interesting. This repeater ran on Belden 9913 for 7 years with no problems. Same duplexer, same power, same antenna. Plea

RE: [Repeater-Builder] Re: Replacement of an older Repeater

2007-04-14 Thread N9WYS
I thought manufacturers were required by some obscure law (federal?) to be able to supply parts for any item marketed for 7 years after it's sale... or maybe I was dreaming. ??? Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of skipp025 Back in days of old...

RE: [Repeater-Builder] Re: Replacement of an older Repeater

2007-04-15 Thread N9WYS
o reference a 4- to 7-year support cycle, so maybe I'm all wet... Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] On Behalf Of skipp025 Probably a condition of sale (terms of a contract) to a Government Agency or large customer carried over into the consumer market as a prom

RE: [Repeater-Builder] Re: Replacement of an older Repeater

2007-04-15 Thread N9WYS
Not to worry, Ken. There are PLENTY of purveyors of parts for the Vette... The primary one that comes to mind for me is Mid America Corvette. Of course, they're only about a 3 hour drive from my house. And then there's Ecklers, and Corvette Central, and. I own a '74 coupe. (Yes, **another*

RE: [Repeater-Builder] Mini - UHF Connector

2007-04-18 Thread N9WYS
I stay away from Radio Shack connectors whenever possible. I had a PL-259 on a jumper that stripped out when I was tightening it HAND-TIGHT onto an SWR meter once. a real piece of crap. R/S overall quality has REALLY suffered over the years. Shame, too, since the other local electronics supply h

RE: [Repeater-Builder] Repeater Dream List

2007-04-22 Thread N9WYS
. This machine is a cooperative effort between Will County EMA and Plainfield Radio League. Contact me off-list if you desire more information: n9wys ameritech net Mark - N9WYS Repeater Trustee - WW9AE/R Asst Chief - Operations, Will Co EMA _ From: Repeater-Builder

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-23 Thread N9WYS
icky. Also - Jordan, if you're looking to unload any of those... I could use one or two more. Contact me direct if this might be the case. Mark - N9WYS n9wys () ameritech () net -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Bob M. Sorry, but while the chassis

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-24 Thread N9WYS
12dB SINAD. I'm wondering if this mod will help even though the receiver is operating close to factory specs, or if I should just chuck this receiver board in the crapper in favor of a better one, or... Any ideas? Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.c

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-25 Thread N9WYS
Larry, The element was re-rocked/calibrated/compensated/etc by ICM… This is why I was wondering if it might be worth the effort to do the cap change to the receiver board. Mark – N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of larryjspammenot Who did you order

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-25 Thread N9WYS
was being tuned up in the 450-470 range. My MICOR UHF Receiver was pretty deaf until I sent it to ICM and had them make a crystal to replace the other one from the other company. LJ -Original Message- From: N9WYS Sent: Apr 25, 2007 5:23 PM To: Repeater-Builder@yahoogroups.com Subject

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-26 Thread N9WYS
#x27;re both working great (transmit and receive elements) in the repeater now (it's just down the hall about 10 feet away. I live on a tall hilltop). LJ Original Message- From: N9WYS You sent the whole receiver section? (Sounding like "Bluto" Blutarski in Aminal House.)

RE: [Repeater-Builder] Micor RX frequency ranges?

2007-04-26 Thread N9WYS
aybe its better that the main site is a tad bit deaf - gives the remotes a better chance of being voted. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Bob M. Since the caps are in the multiplier section, I doubt you'll gain sensitivity by r

RE: [Repeater-Builder] Tone remote setting question

2007-04-27 Thread N9WYS
one that measures in dB, I believe. Thanks! Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Dan Blasberg Most of the radio circuits that i remotely test and we (Verizon) engineer are 0, -16 circuits, meaning that the from the telecom interface we a

RE: [Repeater-Builder] Tone remote setting question

2007-04-27 Thread N9WYS
Sorry - I believe it also needs to be able to measure the frequency of the audio tone on the line... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of N9WYS My "helper" told me that I need to start looking for test equipment - he's tak

RE: [Repeater-Builder] Motorola R100 repeater

2007-04-27 Thread N9WYS
John, Did you get my previous off-list reply to this message? Haven't heard a reply - so I'm just checking... I think I can help you with everything you need. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Mr John Lloyd I have acquired

RE: [Repeater-Builder] Help me in selecting a GMRS repeater antenna

2007-04-27 Thread N9WYS
nds. I drilled through the single rafter that the one leg mounted above to allow for the cross-beam. The other two legs fell between rafters... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Preston Moore Anyone have any suggestions on an antenna for GM

RE: [Repeater-Builder] Tone remote setting question

2007-04-27 Thread N9WYS
That's what I'm looking for!! Thanks, Steve! Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Steve Bosshard (NU5D) I use a TIMS Meter - transmission impairment measuring system - Halcyon, Convex, NT, even Helper Instruments made a nice $300 box

RE: [Repeater-Builder] New repeater Motorola or MA/COM

2007-04-30 Thread N9WYS
Tim, Now THAT'S a loaded question. hehehehe Be prepared - now you'll get responses from Motorola fans, GE/Ericsson/MA-Com/Tyco fans, Kenwood, et al. So now it becomes a question of: new vs. old equipment; what purpose of usage (commercial vs. ham); etc. Ad Nauseum Ma

RE: [Repeater-Builder] New repeater Motorola or MA/COM

2007-04-30 Thread N9WYS
ame problems. Supposedly a factory rep form Johnson wasn't even able to resolve the issues. YMMV. Mark - N9WYS Asst Chief - Operations, Will County (IL) EMA / Field Services Division _ From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] I'll tak

RE: [Repeater-Builder] New repeater Motorola or MA/COM

2007-05-01 Thread N9WYS
Here's my 2¢ worth... I'm running a 150W Crescend PA behind my Kenwood TKR-820 repeater - absolutely NO complaints!! Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Jim B. Sent: Tuesday, May 01, 2007 8:01 AM To: Repeater-Builder@yahoo

RE: [Repeater-Builder] shark frenzy on ebay for 500 watt vhf amplifier

2007-05-02 Thread N9WYS
$405.00 Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Steve Bosshard (NU5D) Well OM, what did it go for??? Paid $1100 for a used Commander II with a good tube a year or so ago - old amp but sure works nicely. Steve NU5D On 5/2/07, skipp025 <[EM

RE: [Repeater-Builder] TS-32 story

2007-05-02 Thread N9WYS
okie dough". FWIW - I bought a TS-64DS and installed it on my 444.550 repeater. Working like a charm. 73 de Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] In a message dated 5/2/2007 9:51:34 A.M. Pacific Daylight Time, [EMAIL PROTECTED] wr

RE: [Repeater-Builder] r100 - eeprom memory map?

2007-05-06 Thread N9WYS
Barry, What are you trying to do - program this without RSS? Or modify the RSS to work in the ham band? I have some experience with the R-100 repeater... and might be able to save you some hair and time (not necessarily in that order). Mark - N9WYS -Original Message- From: Repeater

RE: [Repeater-Builder] Re: r100 - eeprom memory map?

2007-05-07 Thread N9WYS
OK, Barry - sounds like you're well on your way, then. I have one tuned to 444T5500 and it runs like a champ! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Barry Buelow Well I was tryingn to stumble through RSS without much luck.

RE: [Repeater-Builder] Quasi-Simulcast?

2007-05-10 Thread N9WYS
Those signals are usually only generated near the Cathedral of Notre Dame… Mark – N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of radio5000 While reading this article: HYPERLINK "http://mrtmag.com/mobile_voice/radio_big_signals_small/"http://mr

RE: [Repeater-Builder] OT: Anyone watching "Deadliest Catch" on Discovery Channel?

2007-05-21 Thread N9WYS
for use”, along with the SSB stuff for ocean-going vessels. My guess is you won’t see a frequency, but rather a 2-digit display for the marine channel they’re operating on at the time… The keypad allows direct entry for the channel number. Mark – N9WYS I also did some searching, and

[Repeater-Builder] Stupid question

2007-05-21 Thread N9WYS
nal from the TP-3200? The Audio IN + ?? Or do I need to designate another pin on the GTX connector for this purpose? Thanks, Mark – N9WYS No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.7.6/814 - Release Date: 5/21/2007 2:01 PM

RE: [Repeater-Builder] Stupid question

2007-05-22 Thread N9WYS
I believe it does - but that is only one connection, and I need to be able to bring in flat audio from the as well... I think what I'm going to do is use the PL generating properties of the GTX itself for now. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroup

RE: [Repeater-Builder] Stupid question

2007-05-22 Thread N9WYS
elf. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of mch It doesn't have both flat audio and mic audio for TX? Joe M. N9WYS wrote: > > I believe it does - but that is only one connection, and I need to be able > to bring in flat audi

RE: [Repeater-Builder] Re: Remote Base/Repeater Question From a Newbie

2007-05-23 Thread N9WYS
Kerry, If you decide to go with the PAC-RT, let me know. I have a VHF unit right now in my shack - it's on 154.920, IIRC. We can "talk". :-) 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of kdf9511 I think you may be right.

RE: [Repeater-Builder] DStar Repeater Pics

2007-05-24 Thread N9WYS
panels (like one for TX, another for RX, one for PL detect, possibly one for SWR within limits, a multi-digit display for forward power out, etc, etc, for our systems, so they look more "interesting" to others... :-) Mark - N9WYS -Original Message- From: Repeater-Builder@yahoo

RE: [Repeater-Builder] Multimeter

2007-05-24 Thread N9WYS
. Here's a link: http://shop3.outpost.com/{iLa171Q+M3RUgogrVMfHsg**.node1}/product/2957425;js essionid=iLa171Q+M3RUgogrVMfHsg**.node1?site=sr:SEARCH:MAIN_RSLT_PG 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Doug W7FDF I have need of a battery o

RE: [Repeater-Builder] Multimeter-Found!!

2007-06-01 Thread n9wys
I'm sure you won't be sorry with your decision, Doug!! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Doug Fitts Many thanks to all who responded to my query on what might be the best multimeter to purchase. I went with the Fluke mod

RE: [Repeater-Builder] paging system

2007-06-02 Thread n9wys
Hey - don't wrap me up in this, simply because I **am** "one To-many"... 73 de Mark TOMANY - N9WYS Sorry - couldn't resist a bit of weird humor... hi hi -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of [EMAIL PROTECTED] 97.201 (e): An a

RE: [Repeater-Builder] Re: paging system

2007-06-03 Thread n9wys
mes illegal. (And I'd hate to have to count all the net control stations who do >that< on a weekly basis.) But then again, I'm not a lawyer, or an FCC regulator... 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Christopher Hodgdon

RE: [Repeater-Builder] Re: paging system

2007-06-03 Thread n9wys
Good catch, Laryn! I think this supports my previous assertion, too. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Laryn Lohman 97.3 Definitions (10) Broadcasting. Transmissions intended for reception by the general public, either direct or

RE: [Repeater-Builder] My FIRST repeater!

2007-06-14 Thread n9wys
e to the larger metro areas do. Sorry if I rained on your parade some - I just don't want to see you spend money on equipment only to find out you can't use it as you originally planned. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECT

RE: [Repeater-Builder] ctcss and dcs at same time?

2007-07-02 Thread n9wys
he current technology being employed for this purpose, the tendency will be more toward "not working" for just the reason you cited below. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of mch If they are far enough apart in frequency and

RE: [Repeater-Builder] Hello...

2007-07-03 Thread n9wys
this subject. Pick and choose the information and tailor it to your needs / objectives. Most of us here have accomplished exactly what you are setting out to do, so be sure to ask questions first and save yourself the headaches! And most of all, try to have FUN with it. 73 de Mark - N9WYS -

RE: [Repeater-Builder] Acronyms-a little OT

2007-07-07 Thread n9wys
Thanks, Mike. I had to bookmark that page! One I use occasionally is which stands for Big $h!% Eating Grin. H... Wonder why it didn't make the list there. HAHAHA Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Mike Morris WA6ILQ A

RE: [Repeater-Builder] MSR2000 pl tone card???

2007-07-26 Thread n9wys
Never mind - I should have read further down the list. Sorry for the extra bandwidth. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of n9wys Sent: Thursday, July 26, 2007 4:05 PM To: Repeater-Builder@yahoogroups.com Subject

RE: [Repeater-Builder] MSR2000 pl tone card???

2007-07-26 Thread n9wys
Gervais, I have one at the garage - will be there later tonight and will check for you. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of gervais hi well i need to install a pl tone card in my MSR 2000 vhf anyone knows the part number of this slot

RE: [Repeater-Builder] Rohn 25g Tower

2007-07-29 Thread n9wys
Don, I put up my tower first, then mounted the bracket and affixed the tower to it - THEN poured the concrete base. (I buried 4' of tower.) Makes certain the tower it straight that way! Mark - N9WYS Disclaimer: Not affiliated with any other N9WYS that you may know or might

RE: [Repeater-Builder] Rohn 25g Tower

2007-07-29 Thread n9wys
Nope - 190 feet, that way he doesn't have to content with FAA registry. ;-p Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Chuck Kelsey Forget the Rohn 25G and house bracket... Get a 200' Rohn SSV free-standing tower and live in a t

RE: [Repeater-Builder] Need An IFR Service Center

2007-08-01 Thread n9wys
Paul, try here: Cardinal Electronics, Inc. 1631 N. Evergreen Ave. Arlington Heights, IL 60004-3806 Phone: (847) 797-7820 http://www.cardinalelec.com/ I have no pecuniary interest in this company, but do know they have en excellent reputation here it the Midwest. Mark - N9WYS

RE: [Repeater-Builder] Need An IFR Service Center

2007-08-01 Thread n9wys
Sorry for the fat fingers. What I meant to say was: "...they have an excellent reputation here in the Midwest." Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of n9wys Paul, try here: Cardinal Electronics, Inc. 1631 N. Evergreen Ave.

RE: [Repeater-Builder] tone encoder/decoder board

2007-08-06 Thread n9wys
at $59.95. http://www.com-spec.com/price.htm Maybe a call to Com Spec would help you identify a source - or maybe they'd just sell direct to you... I own two of their products (a TP-3200 repeater panel and a TS-64DS tone board) and have been very happy with both. Mark - N9WYS -Original Me

RE: [Repeater-Builder] Re: tp-3200 reset board...

2007-08-06 Thread n9wys
now it has User ID and System ID, and I have tried turning each off independently -- to no avail. Thanks! Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of skipp025 Anyone with a tp-3200 needs to inspect it for the additional reset timer daughterboard.

RE: [Repeater-Builder] Line conditioner

2007-08-18 Thread n9wys
ntial market" might be for this item. It's not doing me any good, so I think I'll try to turn it into some profit to use to build my 900 MHz repeater station.Again, if anyone knows of someone who might be interested in this item, please point them my way. Many thanks

[Repeater-Builder] Uniden MRS-915 Repeater

2007-08-22 Thread n9wys
o configure a control head set-up. I also need a key in order to be able to open the drawer units. Ideas... or is this truly a boat anchor?? Mark - N9WYS

RE: [Repeater-Builder] Singer Gertsch repair

2007-08-23 Thread n9wys
John, I never saw a guitar that doubled as a sewing machine before... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of JOHN MACKEY Sent: Thursday, August 23, 2007 3:12 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Singer Gertsch

RE: [Repeater-Builder] Duplexers

2007-08-27 Thread n9wys
that VSWR is *one* reason that cabling on a duplexer must be a function of length, based upon a fraction of the characteristic frequency. But not being a "duplexer person" I'm not all that familiar with the precise engineering behind their interconnecting cabling. Mark - N9WYS

RE: [Repeater-Builder] Duplexers

2007-08-27 Thread n9wys
a profession, so I don't work with this stuff on a day-to-day basis - therefore my memory may be a bit foggy regarding this phenomenon. Now putting on my flame-proof underwear. ;-) 73 de Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of R. K. Brumback

RE: [Repeater-Builder] CTCSS decoder/encoders

2007-09-03 Thread n9wys
Jesse, I use this: http://www.com-spec.com/ts64.htm $54.95 list. Available from Tessco, Hutton and other purveyors... ;-) I have no pecuniary interest in Com-Spec, Tessco, Hutton, etc... just a happy user. Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On

RE: [Repeater-Builder] CTCSS decoder/encoders

2007-09-03 Thread n9wys
te: Oh ya we've used these at work, a fellow tech had one wired into a package, cool thx. On 9/3/07, n9wys <[EMAIL PROTECTED]> wrote: Jesse, I use this: http://www.com-spec.com/ts64.htm $54.95 list. Available from Tessco, Hutton and other purveyors... ;-) I have no pecuniary

RE: [Repeater-Builder] RE: [Motorola-Radius] Re: Radius R100 DPL to PL Change

2007-09-09 Thread n9wys
ong it will take before I can resurrect my computer at home... Thanks! Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Eric Lemmon Sent: Sunday, September 09, 2007 10:14 AM To: [EMAIL PROTECTED] Subject: [Repeater-Builder] RE: [Motorola-Radius] Re: Rad

RE: [Repeater-Builder] Re: Radius R100 DPL to PL Change

2007-09-09 Thread n9wys
OK - if someone can provide him with the interface sheets or the R100 manual he should be able to connect it just fine, then. I only wish I could.. Thanks for the info Eric! Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Eric Lemmon Mark, The

RE: [Repeater-Builder] Re: Celwave Stationmaster part identification help needed - RFS is useless

2007-09-10 Thread n9wys
the document? Just curious - looks like a very valuable document to have it the library... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Mike Morris WA6ILQ It's called "passive intermodulation"... Read this excellent writeup by Narda C

FW: [Repeater-Builder] Re: Celwave Stationmaster part identification help needed - RFS is useless

2007-09-10 Thread n9wys
Never mind... I went to the page itself, and I See that many of the sheets referred to in the bookmarks are no longer available at NARDA... Mark- N9WYS -Original Message- Mike, FWIW - I tried to move back and forth through the bookmarks that opened to the left of this document. Each

[Repeater-Builder] FW: [AR902Mhz / Repeater-Builder] Antenna building

2007-09-10 Thread n9wys
ou. I hope you and your associates stay safe! We at home ARE proud of all your efforts over there! Mark - N9WYS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Naber, Benjamin L. SPC Sent: Monday, September 10, 2007 12:40 PM To: [EMAIL PROTECTED] Subject

RE: [Repeater-Builder] Micor crystals

2007-09-11 Thread n9wys
Robert, What I have done in the past is send in my old elements with a letter detailing what it was I needed to have done. (i.e. re-crystal and fully compensate) When they came back they were exactly what I needed... If I remember correctly, cost was about $55 for each element. Mark - N9WYS

FW: [Repeater-Builder] Slick Identifier

2007-09-20 Thread n9wys
Hi, Gran http://www.com-spec.com/id8.htm http://www.com-spec.com/index1.htm I believe they sell direct. if not, you can buy it from Tessco - once they establish an account for you. Try also AES in Milwaukee - they may carry it, too, but I haven't verified this. Mark -

RE: [Repeater-Builder] Making room - testing DSTAR

2007-09-20 Thread n9wys
, and electronics experts." [Part 97.1(d)] OK, flame-proof suit on... You may fire when ready, Gridley! 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Steve S. Bosshard (NU5D) Sent: Thursday, September 20, 2007 1:53 PM To: Repeater-Builde

RE: [Repeater-Builder] Making room - testing DSTAR

2007-09-20 Thread n9wys
s. I haven't personally played around with any of the D-Star systems/radios... yet. Who knows, maybe 10 years from now we'll be calling D-Star "old technology" too. Yep - old habits die hard. Hehehehe 73 de Mark - N9WYS -Original Message- From: Repeater-Builder@yahoo

RE: [Repeater-Builder] Slick Identifier

2007-09-21 Thread n9wys
Gran - go direct to Com Spec. Their price is currently listed as $69.95 - and nothing on their (Com Spec's) page says anything about it being discontinued. 73 de Mark - N9WYS _ From: Repeater-Builder@yahoogroups.com On Behalf Of Gran Clark If you look at the price list is

RE: [Repeater-Builder] Call Sign and Sounds like a Ham, NOT

2007-09-26 Thread n9wys
as he on? SARA, CFMC? I'd be interested in listening to hear this guy some time... Maybe I'd even query him on his callsign. Hehehehe Moderator note: Sorry for the OT thread... Mark - N9WYS -Original Message- From: Repeater-Builder@yahoogroups.com On Behalf Of Don Sent: Wednesday,

  1   2   3   4   5   >