definitely start using it.
To get your site in some indexes anonymously you might want to create a throw
away identity on FMS and post to the 'sites' (no quotes) board.
- Volodya
P.S. Unfortunately i see a lot more pro-censorship folks on 0,7 then use to be
on 0,5. I d
mounted to and the subdirectories on it.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
http://freenetproject.org/ The Free Network project
"None of us are free until all of us are free."~ Mihail Bakunin
st
the identity's trust list, then you will automatically trust that the identity
will mark other identities correctly.
Go to the following page:
http://localhost:8080/peertrust.htm
Search for Volodya, you should find the identity like this "VolodyA! V
Anarhist at sD-X.." that is
e message board?
The comments are just something for you (and for others if you publish you
list)
to remember why you have set somebody the way you did.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarcho
mounted to and the subdirectories on it.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
http://freenetproject.org/ The Free Network project
"None of us are free u
st
the identity's trust list, then you will automatically trust that the identity
will mark other identities correctly.
Go to the following page:
http://localhost:8080/peertrust.htm
Search for Volodya, you should find the identity like this "VolodyA! V
[EMAIL PROTECTED]" that is
e message board?
The comments are just something for you (and for others if you publish you
list)
to remember why you have set somebody the way you did.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarcho
> I have sent a message to the "test" board, but I only see a message from some
> eliza*, which says the ackbot has received my message, but my message is
> not on the board - what am I supposed to do to get my real message on the
> board (I cannot understand the peer trust/acknowledge thing
> I have sent a message to the "test" board, but I only see a message from some
> eliza*, which says the ackbot has received my message, but my message is
> not on the board - what am I supposed to do to get my real message on the
> board (I cannot understand the peer trust/acknowledge thing
> I then went to the "visit" page, but I did not insert anything in the
> "Domain"
> line as I do not know what to insert?
Anything you want. For example if you want for your mail to be
User at TheCoolDomain.freemail put 'TheCoolDomain' there.
>> For more help about Freemail and other Freenet
> I then went to the "visit" page, but I did not insert anything in the
> "Domain"
> line as I do not know what to insert?
Anything you want. For example if you want for your mail to be
[EMAIL PROTECTED] put 'TheCoolDomain' there.
>> For more help about Freemail and other Freenet applications
bqz69 wrote:
> Anybody know how to install freemail - I have downloaded Freemail-0.1-11.jar
> but get no *.jar file.
>
> Instead I get a zip file, and when I decompress it, I get no *.jar file, but
> 4
> directories without any *.jar file?
>
> I am not a programmer, so please do not answer too
bqz69 wrote:
> Anybody know how to install freemail - I have downloaded Freemail-0.1-11.jar
> but get no *.jar file.
>
> Instead I get a zip file, and when I decompress it, I get no *.jar file, but
> 4
> directories without any *.jar file?
>
> I am not a programmer, so please do not answer too
bqz69 wrote:
> When you use http://dark-code.bulix.org/ to make your reference node, you see
>
> 30 links below on the same site, each containing a ref node of somebody else.
>
> When you then go to http://www.bulix.org/ you see on the left side of this
> page, some 26 lines down following:
>
bqz69 wrote:
> When you use http://dark-code.bulix.org/ to make your reference node, you see
>
> 30 links below on the same site, each containing a ref node of somebody else.
>
> When you then go to http://www.bulix.org/ you see on the left side of this
> page, some 26 lines down following:
>
> BTW, is there a board there or somewhere where
> I can get involved in discussions like digital gold and such forth.
Try politics board.
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
http://freenet
robert fallis wrote:
> I,ve got freenet up and running on kubuntu 8.04, I now need a newsgroup
> reader etc, should I use frost or thaw which is better for linux
>
> bob
While personally i prefer frost, you should keep in mind that it is being DOSed
at the moment, and most boards cannot be publi
nowledge who has
purchased a ticket with a credit card. This information was spread to make them
labelled as thieves in the public eyes.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowl
> BTW, is there a board there or somewhere where
> I can get involved in discussions like digital gold and such forth.
Try politics board.
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
http://freenet
robert fallis wrote:
> I,ve got freenet up and running on kubuntu 8.04, I now need a newsgroup
> reader etc, should I use frost or thaw which is better for linux
>
> bob
While personally i prefer frost, you should keep in mind that it is being DOSed
at the moment, and most boards cannot be publi
nowledge who has
purchased a ticket with a credit card. This information was spread to make them
labelled as thieves in the public eyes.
- Volodya
--
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowl
ng link i think:
>>When everything is OK, restart a fresh install by clicking on this link
>> http://downloads.freenetproject.org/alpha/installer/mac/freenet.jnlp
That's /mac/ at the end of the path there, he says he uses Kubuntu.
Or it can be something completely different...
gt;When everything is OK, restart a fresh install by clicking on this link
>> http://downloads.freenetproject.org/alpha/installer/mac/freenet.jnlp
That's /mac/ at the end of the path there, he says he uses Kubuntu.
Or it can be something completely different...
- Volod
information without the possibility of
censorship (even you cannot take it down).
This makes me believe that you simply tried to do something with Freenet that
it
wasn't designed to do, hence it didn't "work". But then what do i know, i boil
the water for tea in a s
information without the possibility of
censorship (even you cannot take it down).
This makes me believe that you simply tried to do something with Freenet that
it
wasn't designed to do, hence it didn't "work". But then what do i know, i boil
the water for tea in a s
abdussalam Mansoor wrote:
> Dear Sir,
> thank you very much for your quick replay .
> i traied to open the links
> http://127.0.0.1:/alerts/#6783657
> http://127.0.0.1:/alerts/#14111765
> http://127.0.0.1:/alerts/#port-forward:9977237
> but all links "
>
>
>the page cannot be disp
abdussalam Mansoor wrote:
> Dear Sir,
> thank you very much for your quick replay .
> i traied to open the links
> http://127.0.0.1:/alerts/#6783657
> http://127.0.0.1:/alerts/#14111765
> http://127.0.0.1:/alerts/#port-forward:9977237
> but all links "
>
>
>the page cannot be disp
;s not
sun-java, then you will need to do
sudo update-alternatives --config java
and then set sun-java as the default.
Hope this helps.
- Volodya
--
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Kn
;s not
sun-java, then you will need to do
sudo update-alternatives --config java
and then set sun-java as the default.
Hope this helps.
- Volodya
--
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Kn
> 1. Can I search the net for messages (for instance smallsis.PGPKEYID.*)
> so that the correct client can retrieve the messages of the network for
> them selves if they are new. Is this possible at all (through an index
> or a certain way of storing it?);
All the data is being passed in the en
> 1. Can I search the net for messages (for instance smallsis.PGPKEYID.*)
> so that the correct client can retrieve the messages of the network for
> them selves if they are new. Is this possible at all (through an index
> or a certain way of storing it?);
All the data is being passed in the en
richard hepplewhite wrote:
> Hi!
>
> Could anybody explain in simple words which steps to take to start up Frost
> in ubuntu? So far I didn't succeed.
>
> Thanks!
>
> Richard
The problem may be that Ubuntu uses GNU java, not Sun Java. You will need to do
the following:
in the terminal window
richard hepplewhite wrote:
> Hi!
>
> Could anybody explain in simple words which steps to take to start up Frost
> in ubuntu? So far I didn't succeed.
>
> Thanks!
>
> Richard
The problem may be that Ubuntu uses GNU java, not Sun Java. You will need to do
the following:
in the terminal window
switching over to 0,7. There were some messages on FMS
recently suggesting that an individual is a 0,5-traitor.
- Volodya
--
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
"None of us are free until all of us are free."~ Mihail Bakunin
installed the node on the same computer where you are running frost?
- Volodya
P.S. You can also try FMS, although i think it's not as good as Frost, but it
is
more resistant to DoS attacks, and most boards on Frost are currently under
attack. You can get FMS at
/USK at
0npnMrq
switching over to 0,7. There were some messages on FMS
recently suggesting that an individual is a 0,5-traitor.
- Volodya
--
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
&qu
installed the node on the same computer where you are running frost?
- Volodya
P.S. You can also try FMS, although i think it's not as good as Frost, but it
is
more resistant to DoS attacks, and most boards on Frost are currently under
attack. You can get FMS at
/[EMAIL PROTECTE
> I hope this is the right forum to do this on but I'm trying to see what
> freenet offers in the way of privacy/anonymity. I've been exploring Tor
> for sometime which seems to have an incredible system of security via
> the circuit. The only 2 vulnerabilities that I see being: bad exit
> no
> I hope this is the right forum to do this on but I'm trying to see what
> freenet offers in the way of privacy/anonymity. I've been exploring Tor
> for sometime which seems to have an incredible system of security via
> the circuit. The only 2 vulnerabilities that I see being: bad exit
> no
something that
happens at start-up/shut-down that is at fault.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
"None of us are free until all of us a
something that
happens at start-up/shut-down that is at fault.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
"None of us are free until all of us a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Martin Nyhus wrote:
> On Monday 04 February 2008 14:45:31 Ermanno Baschiera wrote:
>> IMHO that's a problem of process priority. Anybody knows how to rise
>> the priority of freenet? (or JVM, I don't know which one)
>> (My CPU isn't too slow for Freene
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Martin Nyhus wrote:
> On Monday 04 February 2008 14:45:31 Ermanno Baschiera wrote:
>> IMHO that's a problem of process priority. Anybody knows how to rise
>> the priority of freenet? (or JVM, I don't know which one)
>> (My CPU isn't too slow for Freene
rrent frost dir most of the time, for example.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
"None of us are free until all of us are free."~ Mihail Bakunin
rrent frost dir most of the time, for example.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal
"None of us are free until all of us are free."~ Mihail Bakunin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> I googled a little on the subject and found below link:
>
> http://www.urban75.org/legal/rights.html
>
> http://en.wikipedia.org/wiki/Legal_rights
>
> My conclusion about secret words etc was:
>
> Be CONSTANTLY "Deaf and dumb" - Do Not Talk ?
Ot
e
privately on the Internet.
The reason why 0.7's data packets are encrypted and not immediately recognised
as Freenet's is exactly for the reasons you've described. Reasons for the
"Secure mode" are also the same.
I hope i didn't come through as b
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> I googled a little on the subject and found below link:
>
> http://www.urban75.org/legal/rights.html
>
> http://en.wikipedia.org/wiki/Legal_rights
>
> My conclusion about secret words etc was:
>
> Be CONSTANTLY "Deaf and dumb" - Do Not Talk ?
Ot
e
privately on the Internet.
The reason why 0.7's data packets are encrypted and not immediately recognised
as Freenet's is exactly for the reasons you've described. Reasons for the
"Secure mode" are also the same.
I hope i didn't come through as b
your star-up time will also grow... the problem (from
what i've
been seeing on my computer) isn't as bad with 0,7 as it use to be with 0,5
but i guess
there's nowhere you can go to escape that.
- Volodya
- --
http://freedom.libsyn.com/ Vo
your star-up time will also grow... the problem (from
what i've
been seeing on my computer) isn't as bad with 0,7 as it use to be with 0,5
but i guess
there's nowhere you can go to escape that.
- Volodya
- --
http://freedom.libsyn.com/ Vo
.
I think that recently (relatively recently) the new ability was added that
forced the peer
to remove you when you removed that peer... could this be a result of that?
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence
.
I think that recently (relatively recently) the new ability was added that
forced the peer
to remove you when you removed that peer... could this be a result of that?
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence
the node that you are running than HTL is decremented, if it's
worse it's
restarted from the max (i think it's 10)...
There must be more stuff going on, but i'm not quite sure what it is.
- Volodya
- --
http://freedom.libsyn.com/ Voice
the node that you are running than HTL is decremented, if it's
worse it's
restarted from the max (i think it's 10)...
There must be more stuff going on, but i'm not quite sure what it is.
- Volodya
- --
http://freedom.libsyn.com/ Voice
t to spy on your communications. If you are
desperate
and have nobody else to exchange with you want to join #freenet-refs on
Freenode IRC network.
I hope this helps.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/
t to spy on your communications. If you are
desperate
and have nobody else to exchange with you want to join #freenet-refs on
Freenode IRC network.
I hope this helps.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/
hanks.
>
> MrFlibble
I have these all the time, with and without power cuts. Delete database-X
directory
and start the node... it will take a long time, but it will rebuild it.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
htt
works for a minute or two,
> and then I get the same error again (on the same block) and the service
> stops.
>
> What can I do to stop this error?
> Hopefully I don't have to erase my database.
> Thanks.
>
> MrFlibble
I have these all the time, with and without
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Victor Hahn wrote:
> no ideas...?
>
> On Monday 09 April 2007 04:12, Victor Hahn wrote:
>> Hi,
>>
>> I tried installing Freenet (without the new installer) which got me the
>> following errors:
>>
>> $ bin/1run.sh
>> Enabling the auto-update feature
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Victor Hahn wrote:
> no ideas...?
>
> On Monday 09 April 2007 04:12, Victor Hahn wrote:
>> Hi,
>>
>> I tried installing Freenet (without the new installer) which got me the
>> following errors:
>>
>> $ bin/1run.sh
>> Enabling the auto-update feature
>
tly this will only give you some access for complete control over the
node from a
separate machine you need allowedHosts *and* allowedHostsFullAccess. Note that
Fproxy and
FCP aren't encrypted, so the channel must be secure enough for you.
- Volodya
- -
tly this will only give you some access for complete control over the
node from a
separate machine you need allowedHosts *and* allowedHostsFullAccess. Note that
Fproxy and
FCP aren't encrypted, so the channel must be secure enough for you.
- Volodya
- -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andreu Correa Casablanca wrote:
> Hello, I have a little problem with Freenet site...
>
> In Spain the Ya.Com ISP block the access to this page, I could access to
> the page through a webproxy, but I can't download the files with
> diferent extensions
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andreu Correa Casablanca wrote:
> Hello, I have a little problem with Freenet site...
>
> In Spain the Ya.Com ISP block the access to this page, I could access to
> the page through a webproxy, but I can't download the files with
> diferent extensions
enable the total
access if
you want to be able to do everything remotely, otherwise you are protected from
somebody
messing up your node from the different ip.
This change really should have been announced specifically.
- Volodya
- --
http://freedom.libsyn.com/
enable the total
access if
you want to be able to do everything remotely, otherwise you are protected from
somebody
messing up your node from the different ip.
This change really should have been announced specifically.
- Volodya
- --
http://freedom.libsyn.com/
ot;.
> Is there a way for creating a master node for starting my own freenet
> network?
>
> Thanks in advance
> Manuel
I have one node that is connected only to stuff on LAN and i know that it
works. Have you
made sure to follow instructions on both ends of each conn
ot;.
> Is there a way for creating a master node for starting my own freenet
> network?
>
> Thanks in advance
> Manuel
I have one node that is connected only to stuff on LAN and i know that it
works. Have you
made sure to follow instructions on both ends of each conn
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Manuel Montini wrote:
> Hello,
> I'm a newbie as for Freenet and I'd like to know if it is possible to
> start Freenet inside a LAN, without going out on internet. Is it
> possible to create a master node to start with? If yes, how can I do it?
>
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Manuel Montini wrote:
> Hello,
> I'm a newbie as for Freenet and I'd like to know if it is possible to
> start Freenet inside a LAN, without going out on internet. Is it
> possible to create a master node to start with? If yes, how can I do it?
>
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Volodya wrote:
> I've updated to the newest freenet-ext.jar by manually downloading from
> http://downloads.freenetproject.org/alpha/freenet-ext.jar and now i'm getting
> this:
>
> INFO | jvm 2| 2007/03/18 15:38:51 |
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've updated to the newest freenet-ext.jar by manually downloading from
http://downloads.freenetproject.org/alpha/freenet-ext.jar and now i'm getting
this:
INFO | jvm 2| 2007/03/18 15:38:51 | Exception in thread "main"
java.lang.NoClassDefFound
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Volodya wrote:
> I've updated to the newest freenet-ext.jar by manually downloading from
> http://downloads.freenetproject.org/alpha/freenet-ext.jar and now i'm getting
> this:
>
> INFO | jvm 2| 2007/03/18 15:38:51 |
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I've updated to the newest freenet-ext.jar by manually downloading from
http://downloads.freenetproject.org/alpha/freenet-ext.jar and now i'm getting
this:
INFO | jvm 2| 2007/03/18 15:38:51 | Exception in thread "main"
java.lang.NoClassDefFound
ine, it would
break this
sort of structure, and popular but new content would find it harder to compete
with the
old. I am not making judgement here as to what content is actually important,
but i think
that what you describe is perhaps very close to Frost's insert on demand. Which
a
ine, it would
break this
sort of structure, and popular but new content would find it harder to compete
with the
old. I am not making judgement here as to what content is actually important,
but i think
that what you describe is perhaps very close to Frost's insert on demand. Which
a
gain, i don't know how technical of an answer were you waiting for, so i
apologise
if i kept it too simple.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/ Self-defence wiki
http://www.kingstonstudents.
gain, i don't know how technical of an answer were you waiting for, so i
apologise
if i kept it too simple.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/ Self-defence wiki
http://www.kingstonstudents.
simple, that's what stops me
from releasing
the fucking freekiwiki, i can't insert the bloody edits of the articles.
- Volodya
(your local anarchist)
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
ht
simple, that's what stops me
from releasing
the fucking freekiwiki, i can't insert the bloody edits of the articles.
- Volodya
(your local anarchist)
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
ht
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matthew Toseland wrote:
> In a nasty centralised way of course, but with the current state of
> technology and deployment ALL social networking is nasty centralized
> crap - partly because of NATs, partly because of business models, and
> partly becaus
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Matthew Toseland wrote:
> In a nasty centralised way of course, but with the current state of
> technology and deployment ALL social networking is nasty centralized
> crap - partly because of NATs, partly because of business models, and
> partly becaus
ll
have "freenet
connection" option there, to allow people that are already in your network to
connect to
each other. This would have to be Ian's and toad's wet dream, since it would
generate the
proper f2f network.
- Volodya
- --
http://freedom.libsyn.co
ll
have "freenet
connection" option there, to allow people that are already in your network to
connect to
each other. This would have to be Ian's and toad's wet dream, since it would
generate the
proper f2f network.
- Volodya
- --
http://freedom.libsyn.co
seednode for the dark net?
>
> Wilfried
The point is that there is no seednodes for DarkNet, that's exactly the point,
there is no
way to get the list of all the people who run freenet now.
I wanted to give you a link to Freenet's wiki, but the site seems to be down
again.
seednode for the dark net?
>
> Wilfried
The point is that there is no seednodes for DarkNet, that's exactly the point,
there is no
way to get the list of all the people who run freenet now.
I wanted to give you a link to Freenet's wiki, but the site seems to be down
again.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Possibly. But perhaps it's just "backoff sucks". Several of the simulations
> seemed to
> suggest this!
What do you mean here, please.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Possibly. But perhaps it's just "backoff sucks". Several of the simulations
> seemed to
> suggest this!
What do you mean here, please.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freed
nk i could achieve such speeds on the dead-net. However, those breathe
periods between
back-off are far and few in between, so over-all, inserts are quite slow for me
now. I
think in the past 24 hours i've managed to insert around 15-20MiB.
- Volodya
- --
ht
000. I was just
interested if
somebody put the more than sign in the place of less than somewhere in the code.
Also it's very weird that it only started to happen after 1010 and doesn't as
of yet go
away, so it's not a temporary problem due to the change, but rather (imho)
somethin
nk i could achieve such speeds on the dead-net. However, those breathe
periods between
back-off are far and few in between, so over-all, inserts are quite slow for me
now. I
think in the past 24 hours i've managed to insert around 15-20MiB.
- Volodya
- --
ht
000. I was just
interested if
somebody put the more than sign in the place of less than somewhere in the code.
Also it's very weird that it only started to happen after 1010 and doesn't as
of yet go
away, so it's not a temporary problem due to the change, but rather (imho)
somethin
oftware.wrapper.WrapperManager$12.run(WrapperManager.java:2788)
> jvm 1| Closing database due to shutdown.
> [...]
>
> What can I do?
>
> Regards
> Claus
I don't know the answer, but i'll try anyhow. Check your freenet.ini, and see
what is the
port that is us
oftware.wrapper.WrapperManager$12.run(WrapperManager.java:2788)
> jvm 1| Closing database due to shutdown.
> [...]
>
> What can I do?
>
> Regards
> Claus
I don't know the answer, but i'll try anyhow. Check your freenet.ini, and see
what is the
port that is us
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> What is your input and output rate? 1011 runs fine for me, the node
> finally uses the allowed output capacity:
>
> # Output Rate: 12.2 KiBps (of 14.0 KiBps)
> # Input Rate: 15.8 KiBps (of 56.0 KiBps)
>
> Maybe your output rate is reaching 30K/s an
with freenet code, but
that is
simply impossible.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/ Self-defence wiki
http://www.kingstonstudents.org/ Kingston University students' forum
"None of u
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> What is your input and output rate? 1011 runs fine for me, the node
> finally uses the allowed output capacity:
>
> # Output Rate: 12.2 KiBps (of 14.0 KiBps)
> # Input Rate: 15.8 KiBps (of 56.0 KiBps)
>
> Maybe your output rate is reaching 30K/s an
with freenet code, but
that is
simply impossible.
- Volodya
- --
http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast
http://freeselfdefence.info/ Self-defence wiki
http://www.kingstonstudents.org/ Kingston University students' forum
"None of u
#x27;t exist
then it's possible that you are running your commands from a wrong directory.
Make sure
that you change your directory to whereever you've installed your Freenet to.
If the
filesize is somehow 0, then something was wrong with your download/install
process. Try again.
101 - 200 of 330 matches
Mail list logo