Hello,
Axel and i had the same bug, and we noticed that when explicitely select the
wall source at the export lox command, the issue is solved ("export model -o
out.lox -wall-source maps").
Personally i would assume this is a bug, because when i select datasets i would
want the remaining data t
I just recompiled and can confirm that my problem indeed was the same
and is gone with therion 5.5.6+5208297 (2021-01-19)
Good work!
Thank you!
Am 2021-01-19 22:00, schrieb Benedikt Hallinger:
Hello,
Axel and i had the same bug, and we noticed that when explicitely
select the wall source at
Wookey, when is this expected to appear in testing?
I would test it
> Am 24.01.2021 um 13:57 schrieb Wookey :
>
> On 2021-01-23 11:34 +0100, Stacho Mudrak wrote:
>> Hi Axel,
>> these big numbers are just NaNs in fact. It does not affect any output -
>> it just means the map has no altitude
I just did apt-get update, and see 5.5.6ds1-5
That is the old version, right? I do wait for 5.5.6ds1-6 ?
Am 2021-01-26 16:16, schrieb Wookey:
On 2021-01-24 14:40 +0100, Benedikt Hallinger wrote:
Wookey, when is this expected to appear in testing?
I would test it
It's there now.
W
e the altitude band according to the actual min/max values
of the selected dataset.
$ therion -v
therion 5.5.6 (2020-12-27)
- using Proj 7.2.1, compiled against 7.2.1
But: therion compile cdf201b5bf921 has the same behaviour.
Am 2021-01-27 8:59, schrieb Benedikt Hallinger:
I just did ap
aven .3d export?
It would be great if we could find this bug before therion goes to
debian release.
S.
On Mon, 1 Feb 2021 at 10:17, Benedikt Hallinger
wrote:
Checked it, looks good for me (data selection, and pdf map printout
with
people showing up again), with one exception:
- I source a
Yes, the scraps are like this (s=station:)
[good scrap: s1 s2 s3]
joined
[bad scrap: s3 ..only walls]
Am 2021-02-01 20:19, schrieb Martin Sluka via Therion:
1. 2. 2021 v 20:10, Benedikt Hallinger :
Probably it's caused by artifacts, see screenshot.
Thats an old bug, and caused by
minimalistic
sample?
Thanks, S.
On Mon, 1 Feb 2021 at 20:10, Benedikt Hallinger
wrote:
Hi, thanks for responding,
i have the problem only tested with the lox.
The red box fits nicely my selected data.
The survex file also is OK.
Probably it's caused by artifacts, see screenshot.
Thats a
data (2.4 km).
Am 2021-02-01 21:37, schrieb Benedikt Hallinger:
I try to boil it down
Am 2021-02-01 21:12, schrieb Stacho Mudrak:
Hmmm, even scraps extending far beyond a known station could cause a
problem - usually, it is the case with steep passages. In your case,
it looks like some outline
not a
perfect algorithm and in your case, there is some issue. Placing a
point dimension close to the station should override this calculation.
HTH, S.
On Mon, 1 Feb 2021 at 23:10, Benedikt Hallinger
wrote:
It's hard to isolate.
The structure is like this:
Hirlatzhoehle/Zubringer/,
where
ea created something
as infinite vertical chimney.
I had to comment one scrap in time from that part of cave and checked
the result. Than I shorted one of those particular scraps and added
correct join.
HTH
Martin
2. 2. 2021 v 9:48, Benedikt Hallinger :
Hm, that didn't help, unfortunately.
checked the result. Than I shorted one of those particular scraps
and added correct join.
HTH
Martin
2. 2. 2021 v 9:48, Benedikt Hallinger :
Hm, that didn't help, unfortunately.
in the meantime I also tried coloring the PDF by altitude, this is
not affected and working like expected.
M
An option could be to overwrite the symbols with empty metapost ones
> Am 07.02.2021 um 17:51 schrieb Tarquin Wilton-Jones via Therion
> :
>
> Hi David,
>
>> Does anyone know how to remove the lines that appear between survey
>> stations used for surveying around surface features?
>
> symbol-
Hi there,
if you measure the altitude with a barometric device, you do not get the
altitude above the ellipsoid. You have to account for that at the input
of your data.
With the "cs" command you define your input data to be in a specific
coordinate system, and also your altitude has to be giv
.com [2]
On Fri, Feb 19, 2021 at 9:18 AM Benedikt Hallinger
wrote:
Hi there,
if you measure the altitude with a barometric device, you do not get
the
altitude above the ellipsoid. You have to account for that at the
input
of your data.
With the "cs" command you define your input dat
# Hungarian EOV
fix 0 647151 242509 262
kml:
19.00961011626948,47.52649337576407,291.08568208889801
291-262 = 29 m = 44m geoid height - 15m Proj4 error
[2]
Mentes a vírusoktól. www.avg.com [2]
On Fri, Feb 19, 2021 at 11:06 AM Benedikt Hallinger
wrote:
Isn't EGM84 the refe
o length compass clino
extend right
0 1 10.00 180.0 -90.0
1 2 10.00 0.0 0.0
2 3 10.00 90.0 0.0
units left right up down meters
data dimensions station left right up down
endcenterline
endsurvey
[3]
Mentes a vírusoktól. www.avg.com [3]
On Fri, Feb 19, 2021 at 11:49 AM Benedikt Hallinger
wrote:
As far as i understood, when you tag your data to be in a certain coordinate
system that should include all three data points when the coordinate system
defines them.
If you want an altitude offset, i would expect that we must manually convert.
As an example: i tag my data to be wsg89, which def
Good morning,
while debugging https://github.com/hbeni/therionsurface2survex/issues/1
i stumbled upon a format question i did not give tought until yesterday.
With the "grid" command you specify coordinate origin and size of a
surface grid:
grid
Until now i assumed that:
a) these d
to be from west to east and south to north, thus always positive.
row and cols count cannot be zero or negative for obvious reasons.
Stay safe!
kind regards, Beni
Am 2021-02-24 8:18, schrieb Benedikt Hallinger:
Good morning,
while debugging
https://github.com/hbeni/therionsurface2survex/issues
Hello,
as some of you already know, the therionsurface2survex tool can generate
surface meshes for aven out of therion surface or gdal grids. This allows for
example to display a 3d-grid in loch and aven, and to take measures between
cave and surface in aven.
Today i enhanced the tool so it ca
See here: https://github.com/therion/therion/issues/239
Am 2021-03-09 11:41, schrieb Xavier Robert:
Hello,
For my Therion’s projects, I wrote a global config file (Config.thc)
where I defined all the user defined symbols. In my thconfigs, I call
this config file at the beginning of the file wit
, Benedikt Hallinger a
écrit :
See here: https://github.com/therion/therion/issues/239
Am 2021-03-09 11:41, schrieb Xavier Robert:
Hello,
For my Therion’s projects, I wrote a global config file (Config.thc)
where I defined all the user defined symbols. In my thconfigs, I call
this config file
Hi,
just wanted to drop a note that I just managed to compile the
therionsurfac2survex tool also for mac now.
You can use it to generate a surface mesh (legs with -flag surface) out
of GDAL or therion surface files.
This is useful if you for example want to measure distances from cave to
surfac
Hi,
We might also differentiate the route finding symbols into two line types: one
for the main junctions and one for the route in between. This way we can select
if we just want to show the main junctions or all the route.
Is there a way of defining custom symbol groups? This way we might creat
Another idea would be to have an -constraint option, that can appear multiple
times let therion avoid certain passages for the route calculation, like
passage height or crossing of a pit; much like avoiding toll roads in a car
navigation unit
> Am 13.06.2021 um 21:49 schrieb Bruce Mutton :
>
>
What is the advantage of digitizing a morphed sketch over just let therion
morph the raw digitized sketch?
I usually just digitize the raw paper sketch and get good results.
> Am 27.06.2021 um 12:43 schrieb Torsten Schnitter via Therion
> :
>
>
> Hi
>
> As I read some of the last mails I ca
This is really a fine piece of software and a good project.
Thank you all for all the ongoing effort over all those years!
btw. my mapping project of the hirlatz cave is approaching to cross the
70km mark soon :)
Am 2021-09-17 8:42, schrieb Bruce Mutton:
thanks a lot for finding out and rep
Hello,
I currently play around with the layer feature.
Currently it is so, that each "select"ed map goes in its own layer,
which is fine.
In my data there are nested maps however. They get collated into one big
layer.
I don't know PDF specifics, but it would be very handy to have "nested"
la
Hi metapost wizards,
I try to fill a label with the page background.
thfill ((bbox lab)) scaled (sc * basescale * 1.5) withcolor
;
For i tried "label_fill_color", which however may be a
different background.
I also tried "background", but that yields the cave passage background
colour.
n:
On 23/11/2021 15:08, Benedikt Hallinger wrote:
I don't know PDF specifics, but it would be very handy to have
"nested" layers, i.e. submaps as separate layers in the main layer.
That would be very useful, don't know if it is possible
If sublayersa re not possible, it w
reviews (from 164-Grundriss) and also the
offsets defined in 164-Hauptplan.
I also tried "select 164-Grundriss -map-level basic" with the same
result.
Am 2021-11-23 17:01, schrieb Andrew Atkinson:
On 23/11/2021 15:49, Benedikt Hallinger wrote:
es, exactly, when i use "select&
Great, that works as intended!
Thank you very much!
Am 2021-11-23 21:35, schrieb Martin Budaj:
On Tue, Nov 23, 2021 at 4:34 PM Tarquin Wilton-Jones via Therion
wrote:
> In which variable do i access the page's background color (the one set
> wit the layout option "map-bg")?
Fun fact ... you
Hi there,
i would want to get some advanced statistics regarding lengths in a very big
cave (130km/Hirlatz).
Basicly i want to supply two stations and get the following data for the
shortest path:
- length of shots
- cumulated height for shots going upwards
- cumulative depth for shots going dow
Havin that native in some related software would be awesome.
I think aven would be a good candidate for that, as well as loch.
Am 2021-11-28 22:33, schrieb Tarquin Wilton-Jones via Therion:
I implemented such functionality (not the visualization) a while ago
as a little exercise in Python. If y
/Loch models.
Bruce
-Original Message-
From: Therion On Behalf Of Olly Betts
Sent: Sunday, 28 November 2021 07:57
To: Benedikt Hallinger
Cc: therion@speleo.sk
Subject: Re: [Therion] Get shortest route
On Fri, Nov 26, 2021 at 05:10:18PM +0100, Benedikt Hallinger wrote:
i would want to get
th:", length / 100, "m")
print("Cumulated height going upwards:", upwards / 100, "m")
print("Cumulated depth going downwards:", downwards / 100, "m")
Cheers,
Thomas
On Sat, Nov 27, 2021 at 8:25 PM Olly Betts wrote:
On Fri, Nov 26, 202
Some Metadata could be derived from the scraps we have in therion.
That will not be 100% accurate, of course, but for ecample if a
centerline shot crosses some pit, this could provide useful routing
information (because we can infer that we need rope and climbing gear
for this leg). Or from the
Thank you Martin, for clarification!
> Am 30.11.2021 um 20:49 schrieb Martin Budaj :
>
> On Tue, Nov 23, 2021 at 4:42 PM Andrew Atkinson wrote:
>>> On 23/11/2021 15:08, Benedikt Hallinger wrote:
>>>
>>> I don't know PDF specifics, but it would be ver
Hello,
I currently experiment with creating a nice overview map of a fairly
complex part of the Hirlatz cave. The dataset spans about 8km in passage
lengths in variuous levels with lots of over-/underlaying passages.
The data is organised in surveys, where each survey defines at least a
"Hauptm
om survey selection is feasible
> without any negative side effects. I am just not sure, how much work would it
> be to implement it.
>
> S.
>
>
>
>> On Thu, 9 Dec 2021 at 10:37, Benedikt Hallinger wrote:
>> Hello,
>> I currently experiment with crea
Hi,
no specific info on the exact project, but generally you could open a issue
ticket there and ask your very question. Each project may have its own rules.
But most commonly it works this way:
- you clone the repo at github (so its public)
- you make a new branch and do your stuff
- you then op
Hi there,
is there a way in which I can stretch the scallop symbol? I have some
need for a streched version, but ideally this should probably be an
option to the already existing symbol, shouldn't it?
___
Therion mailing list
Therion@speleo.sk
https:/
I'm not sure, but I somehow remember something about some script that
did the caluclation.
Never run it so far, however.
And I don't remember the name.
Would be cool if such a function would be integrated in therion itself
and printed to the log...
(maybe do both: just use LRUD data and another
Let not forget muPDF which renders also pretty fast on linux.
Am 2022-02-23 13:16, schrieb Bill Gee:
I agree that Adobe Reader defines what it means to be "compatible".
However, for those of us running Linux Adobe Reader is not a viable
option. I used to have an rpm file for a 32-bit Adobe Read
Besides that, I cant compile due to missing deps.
Does someone already have info on what debian packages i need to
install?
g++ -DIMG_API_VERSION=1 -Wall -DTHLINUX -O2 -DPROJ_VER=9 -I/usr/include
-Iextern -Iextern/shapelib -Iextern/fmt/include -std=c++14 -o ./therion
therion-main.cxx ./thdat
Yes, seems excessive. Why ldap?
> Am 26.04.2022 um 14:40 schrieb Wookey :
>
> On 2022-04-26 12:40 +0200, Benedikt Hallinger wrote:
>> Besides that, I cant compile due to missing deps.
>> Does someone already have info on what debian packages i need to install?
>
Another idea might be to export as .sql database, load that with sqlite
("sqlite> .read cave.sql") and query the coordinates of the station.
See THBook, . 62 for details of the tables, but the stations table has
xyz cooridnates to query.
That aproach can be easily automated via shell scripting,
Hm, I'm not sure this will not trigger alot of false positives in some
of my projects, where structure is heavily divided into smaller files
which are inputted to form a whole complete.
But I want to second you: the error message shown is very not-intuitive
to find the root cause.
So maybe we
Hello,just a random comment from me;but wouldn‘t it be important that map readers clearly see „danger“?I am using a sinple warning sign everywhere and clarify using text.So even non-cavers or people not familiar with specific map symbols are clearly pointed at „watch out!“.The droplet proposed here
Hi there, here the updated version.
Am 2016-11-10 18:15, schrieb Benedikt Hallinger:
Oops, yes, thank you for spotting this!
It must read 0.125 of course!
Am 2016-11-09 15:21, schrieb Footleg:
This looks potentially very useful, but I have not yet explored defining
sd settings in my survey
... i made a github pull request to make incorporation easy.
https://github.com/therion/test/pull/6
Howevr, i do not know if that repository is the projects central main code
base?
Greetings,
Beni
Am 2016-11-25 22:17, schrieb Benedikt Hallinger via Therion:
Hi there, here the updated
More extensively, in the centerline block use:
fix R84 10481.661 19219.410 115.967
In addition to that you can tell therion in which system those coordinates
are (again in the centerline block), because unless you do that, therion
operates in an "anonymous" local system. Using cs allows for f
Hello, and merry christmas!
I currently try to correct some old surveys without altering the original
data.
The manual proposes the "revise" command to accomplish this, at least i
interpreted it like this.
The problem with the old data is, that the declination setting is wrong but
i dont ha
Hello,
i get gray hair with metapost while i want to make a line symbol for
ladders, so i can nicely draw them in my maps as the cave have alot of them.
The basic idea i had was, t define a symbol of one "rung" segment (rung and
a little of either sides, like the letter "H") as a symbol pictur
draw rectangle and to add
the parameter as number of steps.
Odesláno z iPhonu
24. 1. 2017 v 23:51, Benedikt Hallinger via Therion :
Hello,
i get gray hair with metapost while i want to make a line symbol for
ladders, so i can nicely draw them in my maps as the cave have alot of
them.
The basic i
Hello again,
my idea somewhat worked... see attached picture.
The ladder segments are overlapping, this is still hacky.
However it gives me the desired result and also works with curved lines.
An optimisation cold be to draw the outer sides just as a single line
following the Path slope, howeve
Hello, thank you for your elobaration on the steps.
The difference to "line:*-ladder" is, that steps are not ladders ;)
this has influences on the legend, for example, as well as that with
"line:steps" it is not correctly tagged in the data (for example if someone
would want to list all scraps
would assume, when each centerline has a date
specification.
The main issue here is, that we have surveys which were taken in the 1950s
and extended with an additional centerline in 2000s.
Am 2017-02-17 23:26, schrieb Olly Betts:
On Fri, Feb 17, 2017 at 07:08:48PM +0200, Benedikt Hallinger via
?
Am 2017-02-18 23:24, schrieb Olly Betts:
On Sat, Feb 18, 2017 at 10:20:54AM +0200, Benedikt Hallinger via Therion
wrote:
If therion calculates the average position of all fixed points this is
fine.
the cave spans about 5km w/e and about 3km n/s.
Ah, the 100km is total passage length not extent
Clay trees are small treelike structures consisting of clay.
Its called "Lehmbäumchen" in german.
Am 2017-02-21 17:16, schrieb Rodrigo Severo via Therion:
Hi,
Im making a small revision on the translations I did yesterday. Im not
entirely satisfied with some of them.
Whats a "clay-tree" poin
MUNICAÇÃO
NUMA COMBINAÇÃO PERFEITA
2017-02-21 14:09 GMT-03:00 Guy Demars via Therion :
And called « sapins d’argile » in french.
Guy
Benedikt Hallinger via Therion
mardi 21 février 2017 17:54
List for Therion users
Benedikt Hallinger
Re: [Therion]Translation doubt: what's a "clay
I am able to export fixed stations and entrances with therion 5.3.15.
They are nicely visible once the button is activated in the aven viewer.
Am 2017-02-22 23:34, schrieb Footleg via Therion:
Therion strips most of the data apart from staions and legs out of 3D
files it generates. Colour by er
I do not think this is a bug.
The way i understand (and use) is that with select/unselect you can define
the data to export for one particular run of the compiler.
So you can say "export all of this map, but exclude xyz".
However, it would definitely be more comfortable to have it like discusse
would be great if it would work in one compiler file.
Am 2017-03-03 14:26, schrieb Martin Sluka via Therion:
You are right, Rodrigo, "unselect" doesn't work in any way.
Martin
On Mar 03, 2017, at 12:59 PM, Rodrigo Severo via Therion
wrote:
2017-03-03 4:52 GMT-03:00 Ben
Hello,
i currently have the following immutable centerline:
- immutable.th
survey immutable
centerline -id zug_1
date 2014.11.15
team "Some One" notes
team "Some Other"
team "PersonWhoDidNot Attend"
endcenterline
input extensions.th
endsurvey
--
:07 +0200, Benedikt Hallinger via Therion wrote:
Hello,
i currently have the following immutable centerline:
- immutable.th
survey immutable
centerline -id zug_1
date 2014.11.15
team "Some One" notes
team "Some Other"
team "PersonWhoDidNo
Hello,
i try to generate a PDF with the whole cave rendered with LRUD centerline
data only.
The goal here is to generate a complete picture of the cave (>100km) with
walls generated from LROU data, because i still have very few scraps at this
time.
However therion aborts with an error.
How ca
Hello again,
i try to export some lists and want the titles to appear in german.
for this i added "language de" to my export definition ("de_DE" is not
accepted...).
However, it does not do anything, the text appears still in english.
What am i doing wrong?
Or is the translation still missin
r thconfig file?
m.s.
10. 3. 2017 v 20:27, Benedikt Hallinger via Therion :
Hello again,
i try to export some lists and want the titles to appear in german.
for this i added "language de" to my export definition ("de_DE" is not
accepted...).
However, it does not do anyth
Odesláno z iPhonu
9. 3. 2017 v 22:43, Benedikt Hallinger via Therion :
Hello,
i try to generate a PDF with the whole cave rendered with LRUD centerline
data only.
The goal here is to generate a complete picture of the cave (>100km) with
walls generated from LROU data, because i still
Same result.
I dont know much C, however if i peek into thexptable.cxx, it seems that
there are only fixed strings put into the output. It seems the
translate-method is not invoked, thus no language settings/translations can
be applied.
If someone would add the needed calls, i would happily
, Benedikt Hallinger via Therion :
Same result.
I dont know much C, however if i peek into thexptable.cxx, it seems that
there are only fixed strings put into the output. It seems the
translate-method is not invoked, thus no language settings/translations can
be applied.
If someone would add the
eed to dig into this deeper, but regarding the mailing list, this
issue can be considered done.
Thank you everybody for help, private and public!
You are amazing!
Am 2017-03-11 22:29, schrieb Benedikt Hallinger via Therion:
Hello,
this did not work unfortunately.
However i got a solution.
informations.
Again, may I help you screen to screen?
There is no any chance to steal your data!
Martin
Originalnachricht
Betreff: Re: [Therion] How to render very big cave with centerline and
LROU only? + screenshot
Datum: 2017-03-18 12:53
Absender: Benedikt Hallinger
What is the different between "point dimensions" and "point passage-height"?
If i understand the therion book correctly:
- dimensions is ONLY for the 3D-tube generation and invisible in rendered
maps
- otherwise behaves as if "point passage-height [+ -] would have
been given.
Or are there any
When i do this, i add an -author for the original paper plan and another one
for myself in the scrap.
I feel the original plan author should be mentioned because its his work the
digitalization is widely based on. Here, several persons work on one scrap
(possible at least) and i would add my nam
May i suggest, when altering the rotation speed, please make it
customizable. Do not enforce a static compile time min or max value but
introduce a factor setting so each user may compensate for himself.
Am 2017-03-31 10:34, schrieb Bruce Mutton via Therion:
Now this is getting picky I know.
Fri, Mar 24, 2017 at 3:34 PM Benedikt Hallinger via Therion
wrote:
Hello,
in my loch model i get some strange artefacts.
It seems that the further-away objects are rendered in front of the
nearer-in-front objects.
I would expect that the passages far away would be covered by those in
the
front
on of
Therion.
On windows 10, as perfect a lox file as I’ve ever seen!
Maybe it is an Debian 5.3.15 thing?
Bruce
-Original Message-
From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Benedikt
Hallinger via Therion
Sent: Saturday, 1 April 2017 9:46 AM
To: Footleg
Cc: Ben
bably caused by some older mixing of
stable/testing; just wanted you to know in case you want to dig into it. I
upgraded to debian stretch, where i could install all libs and compile
without trouble)
Am 2017-03-31 22:46, schrieb Benedikt Hallinger:
Hello,
sorry for not responding a while, i
Hello,
when compiling my project, i get an cavern error:
therion: warning -- cavern exit code -- 256
Everything seems to be fine in the map, but what does this exit code mean?
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/lis
trance location was measured by public service
against official grid by theodolite and as such is "perfectly correct".
How can i give this information? Am i forced to use some minimal positive
fraction? (eg. "0.1"?)
If yes, could this be an cavern bug?
Am 2017-04-0
Thank you very much!
I corrected all my fixes to the right syntax now and it works fine.
Am 2017-04-05 20:02, schrieb Olly Betts:
On Sun, Apr 02, 2017 at 11:49:54PM +0200, Benedikt Hallinger via Therion
wrote:
The source giving causing it is:
>fix 1.0 x y z 0 0 0
If i remove
Can't wait to see it in debian testing :)
Am 2017-04-05 21:22, schrieb Martin Sluka via Therion:
On Github!
No any 1th April!
m.s.
5. 4. 2017 v 20:02, Olly Betts via Therion :
On Sun, Apr 02, 2017 at 11:49:54PM +0200, Benedikt Hallinger via Therion
wrote:
The source giving causing
Hello,
i have a bunch of Lox files here, that i want to combine with surface data.
I also want to combine all this into one new lox to investigate the caves
relationships.
Is there any possibility to do that without the source therion data, similar
to the survey use method for survex 3D files
files, if anyone is ever tinkering with Loch.
Bruce
-Original Message-
From: Therion [mailto:therion-boun...@speleo.sk] On Behalf Of Benedikt
Hallinger via Therion
Sent: Thursday, 13 April 2017 8:23 AM
To: therion@speleo.sk
Cc: Benedikt Hallinger
Subject: [Therion] Combining several lox
could also be just an arbitary string in the compiler
file.
Am 2017-04-21 12:39, schrieb Graham Mullan via Therion:
Benedikt Hallinger said:
" the last problem now is, that the surface lox is in a different
coordinate system than the caves (EPSG:31468 vs. lat-long) :/ I hoped loch
Hello,
i wonder why i can produce altitude lines in projected elevation, but not in
extended elevation.
How can i enable the depth lines in xelev output?
(grid-command and friends did nothing)
With best regards,
Beni
___
Therion mailing list
Therion@
Hi,
let me add that imtoo have issues with the proprietary nvidia drivers.
I was not able to debug this, but all info is on the mailing list.
Probably here is something with the proprietary drivers.
Am 2017-05-22 15:00, schrieb Bjørn Egil Johansen via Therion:
I have a fairly fresh Debian 9 Str
Hello,
is it possible to give a specific bounding box in therion thconfig and to
produce a map clipped by that borders?
With best regards,
Beni
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
I am supporting this proposal from my experience.
Am 2017-08-11 15:09, schrieb Footleg via Therion:
Having finally got around to updating my install to 5.4.1 I was trying to
work out how the line colours had appeared in the official builds (Im on
Windows). I see the ini file entries in both xt
Hi there,
i currently draw a very narrow floor meander that has some places where the
walls spread wide open.
Is there a way i can tell line:floor-meander to render on just one side?
The reason i ask is, that i need a differentiation in the dataset between
floor-meander and floor-step for colo
The option to use "alias names" for fixes instead of directly numbers would
be good, this would allow to ship standards with therion and allow the user
to to define custom ones, just like in grade definitions.
Why not extend the grades definition to allow specification of fix std
deviation the
No, i meant the following:
currently one has to give std-dev explicitely:
fix 1.2a 0.5 0.5 0.5
it would be nice to use instead:
fix 1.2a gps
where the term "gps" is some predefined accuracy, like in grade definition
Am 2017-09-11 10:08, schrieb Bruce Mutton via Therion:
Benedikt wrote
The
Jesus!
Am 2017-09-16 11:19, schrieb Martin Sluka via Therion:
3DS MODEL FROM LOCH:
M.S.
___
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
This could be achieved by some perl or bash.
Maybe also php PEAR::File_Therion is also already capable of doing this.
Maybe you could also just comment the scrap command in the to-be-included
file and place an import statement in the sourcing scrap.
Am 2017-10-08 20:17, schrieb Martin Sluka vi
Hello,
i think the upside-down notation is actually more natural and intuitively to
understand.
Am 2017-11-02 11:05, schrieb Bruce Mutton via Therion:
I've just noticed that the latest development snapshot 5.4.1+4369eea seems
to have messed with the altitude legend.
You can see from the scre
Hello,
i agree, the old behavior of sorting is the one i prefer. Sorry k7xed old
euth new behaviour.
Am 2017-11-08 20:02, schrieb Bruce Mutton via Therion:
I'll just post the image again.
We are dealing with absolute altitudes, height above sea level, here, as
per the established Therion imp
Hello,
i have a scrap containing a pit signature that is in the wrong place.
How can i move the pit line to a new x/y-position without changing shape or
m8ving all points msnually individually?
___
Therion mailing list
Therion@speleo.sk
https://mailman
101 - 200 of 227 matches
Mail list logo
