Man in a van wrote:
> Have you installed
>
> Install and Enable additional FileSystems
>
>
>
>
>
>
>
> It is on the LMS page tab, two boxes above the network disk mount
> settings
yes I have
Have you installed
Install and Enable additional FileSystems
It is on the LMS page tab, above the samba settings
Man in a van's Profile:
Hi Guys,
I am still using PCP 3.2 and have recently ran out of disc space on my
attached usb drive. Rather than buying another drive I figured I should
learn how to share a folder on my always on Windows 10 pc that still has
plenty of drive space. I have set up a shared folder that I can see
Now I need to try again the IR remote usb receiver
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
paul- wrote:
> There is a reset button in the pcp web interface jivelite secion on the
> tweaks page.try that.Paul, as always, you Rock!!! ;) Thanks
sdiesel77's Profile:
There is a reset button in the pcp web interface jivelite secion on the
tweaks page.try that.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
Please 'donate'
I can't access this screen. The screen goes black straight after the
logo Picoreplayer
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread:
sdiesel77 wrote:
> Something weird is happening tonight with my PCP player.
> I bought a just boom IR remote and a Flirc USB IR receiver. And since I
> plugged the IR receiver into the player I have a display issue even with
> the usb receiver removed.
> Basically, the player starts as normal,
Something weird is happening tonight with my PCP player.
I bought a just boom IR remote and a Flirc USB IR receiver. And since I
plugged the IR receiver into the player I have a display issue even with
the usb receiver removed.
Basically, the player starts as normal, shows the Picoreplayer logo
that works, thanks!
Luxman L550aii, MA PL300, SB Touch, MDAC
killie99's Profile: http://forums.slimdevices.com/member.php?userid=8337
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
Network discovery is absolutely crazy in Win 10. Sometimes it doesn't
show anything, then days later everything shows no problem!
Try this, right-click the windows logo bottom left of PC screen, select
"Run", type in "\\192.168.1.178" (without quotes, and replace with IP
address of your Pi).
paul- wrote:
> /mnt/FLAC will point to the root directory of your USB drive. If you
> have a folder on the USB drive called FLAC that you want to start in.
>
> Set LMS music directory to /mnt/FLAC/FLAC
ah yes, that was obvious now that you've pointed that out! thanks.
Luxman L550aii, MA
/mnt/FLAC will point to the root directory of your USB drive. If you
have a folder on the USB drive called FLAC that you want to start in.
Set LMS music directory to /mnt/FLAC/FLAC
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
I'm in the process of moving my LMS server from my HPMicroServer to a
Pi3 running 3.22 but I've ran in to 2 problems.
1. I cannot get the correct USB mount point. On my USB drive I have a
FLAC folder in the root directory but I also have other folders in the
root directory which contain the same
Thx Michael, I'll check today and will let you know if other issues
[emoji41]
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread:
Since yesterday I'm getting really big delay from times to times to
access my library or spotty (via Synology DS216+II) on my player Pi3
PCP.
Spotty was having issues yesterday:
https://twitter.com/SpotifyStatus
--
Michael
___
unix mailing list
Likely a NAS/server problem. Get some server logs and post in the
server pages
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
Please 'donate'
Hi Guys,
Since yesterday I'm getting really big delay from times to times to
access my library or spotty (via Synology DS216+II) on my player Pi3
PCP.
Any idea what it could be?
I tried rebooting both player and NAS, solved the issue for 10min and
back again :(
Btw, love this page, so many knowledgeable people [emoji41]
And love PCP, after trying MoOde and Volumio I can really say PCP is so
so Much better IMO [emoji14]
sdiesel77's Profile:
paul- wrote:
> First go to the "Settings->piCorePlayer". Enable the option "Enable
> Power On Button when Powered Off
> Then in "Settings->Screen->Screensaver" There should be a "Display
> Off" optionThat worked !!! Paul, you rock [emoji41]
sdiesel77 wrote:
> In a setup with a 7'touchscreen, Is there a way in PCP to have the
> screen switching off completely after a certain time of inactivity?
> At the moment, the only option I found is to have the screen going black
> when no song is played however I can still see the backlight of
Already selected. It only switch off the screen when I switch off the
unit with the remote button, not following inactivity time
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this
Under Settings then Screen Settings... When Off select the last item
"Off".
Bests,
Howard
sdiesel77 wrote:
> In a setup with a 7'touchscreen, Is there a way in PCP to have the
> screen switching off completely after a certain time of inactivity?
> At the moment, the only option I found is to
sdiesel77 wrote:
> In a setup with a 7'touchscreen, Is there a way in PCP to have the
> screen switching off completely after a certain time of inactivity?
> At the moment, the only option I found is to have the screen going black
> when no song is played however I can still see the backlight of
In a setup with a 7'touchscreen, Is there a way in PCP to have the
screen switching off completely after a certain time of inactivity?
At the moment, the only option I found is to have the screen going black
when no song is played however I can still see the backlight of it.
Thanks Jeff07971
That explains it!
regards
Greg
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
UPDATE
Its a windows "feature"
https://www.google.co.uk/search?q=windows+10+tries+to+mount+and+format+ext4+patitons=utf-8=utf-8=firefox-b_rd=cr=0=Kxe0Wp37BZPZ8AeV56f4Bg
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLiteX,PiCorePlayer
x3,Wandboard
*Server:* LMS Version: Latest Nightly on
Greg Erskine wrote:
> Hi Jeff,
>
> Windows 10.
>
> On Windows 7 and Windows 10, until recently, windows would only ever see
> the first FAT32 partition. Somewhere along the line, my Windows 10
> started seeing the second ext4 partition and prompting to format it. I
> don't know if that is a
Jeff07971 wrote:
> What windows do you use Greg ?
>
> Before 10 I never had to format but now I Think I do (Not 100%)
>
> Jeff
Hi Jeff,
Windows 10.
On Windows 7 and Windows 10, until recently, windows would only ever see
the first FAT32 partition. Somewhere along the line, my Windows 10
What windows do you use Greg ?
Before 10 I never had to format but now I Think I do (Not 100%)
Jeff
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLiteX,PiCorePlayer
x3,Wandboard
*Server:* LMS Version: Latest Nightly on Centos 7 VM on ESXi 6.5.0U1 on
Dell T320
*Plugins:*
TomAmes wrote:
> Thanks guys. I am up and running!
>
> Thank you particularly for the link for the SD formatter as Windows was
> giving me error messages and not allowing me to format "normally." And
> thanks to both of you for steering me to an SD card problem rather than
> a networking one.
>
bucketbiochemist wrote:
> I would greatly appreciate advice on how to get iperf running on the
> picoreplayer + pi3. I've managed to do it on my vortexbox server, but
> I'm not skilled enough to get it to work on the pi. I looked around
> and found references to people using it, but not
I would greatly appreciate advice on how to get iperf running on the
picoreplayer + pi3. I've managed to do it on my vortexbox server, but
I'm not skilled enough to get it to work on the pi. I looked around
and found references to people using it, but not sufficient
instructions to enable me
Man in a van wrote:
> Windows will only read the fat partition on the sd card and not the
> linux partition, that's is why it gives the format message.
>
> If you check "This PC" you will see only one partition (after format and
> before burning the image).
>
> 24769
>
> After you burn the
ah! OK, that is exactly what I was seeing. Thanks.
TomAmes's Profile: http://forums.slimdevices.com/member.php?userid=27792
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
Windows will only read the fat partition on the sd card and not the
linux partition, that's is why it gives the format message.
If you check "This PC" you will see only one partition (after format and
before burning the image).
24769
After you burn the image.
24767
24768
paul- wrote:
> Tom,
>
> If the Pi is getting a dhcp address, then there is not much else that
> could be holding it up. Hooking up a monitor and keyboard to the RPi is
> the easiest way to diagnose what is going on.
Man in a van wrote:
> @TomAmes
>
> If you are using Edge browser it often
@TomAmes
If you are using Edge browser it often needs > http:// before the IP address.
Maybe clear the browser cache
Try Chrome or Firefox and if they don't work, reformat the card using
https://www.sdcard.org/downloads/formatter_4/
If it is a fresh download of pCP did you use a checksum
Greg Erskine wrote:
> Have you tried the shairport LMS plugin?
>
> From what I have heard it is a better solution than using shairport of
> pCP. I haven't tried it myself.
>
> regards
> Greg
Since I have two pi's, a server (LMS) and a player (pCP), I figured
shairport needs to run on the
Tom,
If the Pi is getting a dhcp address, then there is not much else that
could be holding it up. Hooking up a monitor and keyboard to the RPi is
the easiest way to diagnose what is going on.
paul-'s Profile:
I need a bit of troubleshooting help. If this is not the right spot for
that, please point me to it.
I just got a Rpi 3B and hifiberry DAC+ pro. Imaged pCP 3.22 on a microSD
card (after formatting FAT32) and fired it up. The pCP has not appeared
on my LMS. My router (Asus AC86) recognized the
Have you tried the shairport LMS plugin?
>From what I have heard it is a better solution than using shairport of
pCP. I haven't tried it myself.
regards
Greg
Greg Erskine's Profile:
paul- wrote:
> Shairport will change the Digital volume of the card. If you do this
> often, you should look at setting the ALSA volume control (-V option) on
> the squeezelite page.
>
> Put "Digital" (Without the quotes) in that field, then squeezelite will
> adjust the volume with the
Shairport will change the Digital volume of the card. If you do this
often, you should look at setting the ALSA volume control (-V option) on
the squeezelite page.
Put "Digital" (Without the quotes) in that field, then squeezelite will
adjust the volume with the Hardware vs Software control.
Greg Erskine wrote:
> hi randytsuch,
>
> I think this happens as a result of shairplay altering ALSA volume and
> leaving it low after you restart Squeezelite.
>
> Try [ Squeezelite Settings ] > [ Card Controls ] and check the output
> level. It should be 100% or 0dB.
>
> Thanks for the
hi randytsuch,
I think this happens as a result of shairplay altering ALSA volume and
leaving it low after you restart Squeezelite.
Try [ Squeezelite Settings ] > [ Card Controls ] and check the output
level. It should be 100% or 0dB.
Thanks for the thanks.
regards
Greg
Hi guys
I recently installed PCP on a pi zero w with a hifiberry dac+ pro hat.
The DAC feeds a powered speaker.
LMS is running on a pi2 that's hardwired into my router.
I also enabled shairplay in PCP so my family can airplay into the
speaker from their iphones.
All of this working fine :D
My
hi mcduman,
The routine "pcp_user_commands" only handles 3 user commands. :(
Modifying the code yourself will probably cause you pain in the future
because an upgrade will wipeout your edits. I recommend just calling a
script containing multiple commands from one of the user commands as
Greg Erskine wrote:
> hi mcduman,
>
> [Main Page] in [Beta] mode > [Diagnostics] > [Boot] will show you the
> boot process.
>
> User commands are called from #10. do_rebootstuff.sh towards the end.
>
> Numbers #10 and #16 are piCorePlayer, the rest are standard piCore.
>
> regards
> Greg
hi mcduman,
[Main Page] in [Beta] mode > [Diagnostics] > [Boot] will show you the
boot process.
User commands are called from #10. do_rebootstuff.sh towards the end.
Numbers #10 and #16 are piCorePlayer, the rest are standard piCore.
regards
Greg
Jeff07971 wrote:
> If they are all to run at the same time just write it into a script and
> put it in /home/tc, call the script from a user command.
> Remember to back it up and make it executable
>
> Jeff
Thanks, that is a good idea. I am also interested in knowing how user
commands work in
> 2. I need a few more "user commands" under config.cfg. To turn off the
> leds etc. I tried creating user command 4&5 but it did not work.
If they are all to run at the same time just write it into a script and
put it in /home/tc, call the script from a user command.
Remember to back it up and
Hi,
1. I must have deleted some extensions. While the player is very stable
as usual, I cannot see the pi temparature under diagnostics. Which
extension do I need to install to read the cpu temperature?
2. I need a few more "user commands" under config.cfg. To turn off the
leds etc. I tried
All good Greg, I found the answer there and yes there is a plugin
available ;)
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fforums%2Eslimdevices%2Ecom%2Fshowthread%2Ephp%3Ft%3D107180_tid=107180_fid=813_type=t
Thanks
Steph
Another question, is there an option to turn on or something to install
in order to play DSD files?
There's a plugin called PlayDSD.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
hi sdiesel77,
I believe it is possible. I don't have any DSD files myself so I have
never tried. (I should at least have a couple of examples for
testing!!)
You can search back in the pCP threads or wait for a kind person to
respond.
I know Paul has added more DSD functionality in the next
Greg Erskine wrote:
> Maybe the LMS setting > Player > Audio > "Power On Resume" may be what
> you are after (not pCP).
>
> Personally I have never played with it. :confused:Perfect! Thx Greg
Another question, is there an option to turn on or something to install
in order to play DSD files?
At
Maybe the LMS setting > Player > Audio > "Power On Resume" may be what
you are after (not pCP).
Personally I have never played with it. :confused:
Greg Erskine's Profile:
kidstypike wrote:
> That looks like the same case as mine.
>
> Mine is a hifiberry DAC+, the pi screen has it's own 5v power in socket,
> I use 2 x 2.5amp power supplies one for the pi, one for the screen
> (arrowed in pic below), but you could use a "Y" splitter cable (which I
> do in my
sdiesel77 wrote:
> How do you install the Digione board in a 7" touchscreen case? It seems
> that some pins are already used to power the screen board
That looks like the same case as mine.
Mine is a hifiberry DAC+, the pi screen has it's own 5v power in socket,
I use 2 x 2.5amp power supplies
paul- wrote:
> It doesn't use USB. It uses the RPI i2s output.How do you install the
> Digione board in a 7" touchscreen case? It seems
that some pins are already used to power the screen board
[image:
https://uploads.tapatalk-cdn.com/20180308/31c44ad12faaf81767122497fc5f7810.jpg]
paul- wrote:
> It doesn't use USB. It uses the RPI i2s output.Ok fair point
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread:
sdiesel77 wrote:
> What would be better with the hifiberry digi+ or a Allo Digione than the
> Luckit WaveIo?
It doesn't use USB. It uses the RPI i2s output.
paul-'s Profile:
What would be better with the hifiberry digi+ or a Allo Digione than the
Luckit WaveIo? According to the specs, the WaveIoIt seems to be doing
the same or even better (16 to 32 Bit-transparent reproduction / 44.1 to
384 kHz standard sample rates supported?
sdiesel77 wrote:
> Hi Paul
> I've been recommended to use it with my DAC. As"apparently" the RPI USB
> port is not the best in direct for audio. Same for my DAC (Chord Qute
> Ex) it seems that the Coax has better audio quality.
> At the moment, it does work but the sound quality is not as good
Hi Paul
I've been recommended to use it with my DAC. As"apparently" the RPI USB
port is not the best in direct for audio. Same for my DAC (Chord Qute
Ex) it seems that the Coax has better audio quality.
At the moment, it does work but the sound quality is not as good as my
Squeezebox Touch. :(
Not sure why you would use this on a Rpi. No idea if it would even
work.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
Thx Jeff
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
unix mailing
sdiesel77 wrote:
> Thx Jeff. Sorry I m really begging with all these.
>
> So what should I do with this text? I copied it on a notepad and saved
> it (under name lircd.conf) on a USB key but when I try in Linux Infrared
> Remote Control (LIRC) to click on custom it says it doesn t find the
>
Thx Jeff. Sorry I m really begging with all these.
So what should I do with this text? I copied it on a notepad and saved
it (under name lircd.conf) on a USB key but when I try in Linux Infrared
Remote Control (LIRC) to click on custom it says it doesn t find the
file.
Sorry if the question
sdiesel77 wrote:
> Hi All,
> Apologies if the question was already asked but is there a way to use
> the Justboom Smart Remote (USB) with PCP?
>
> Thx
http://forums.slimdevices.com/showthread.php?106755-Announce-piCorePlayer-3-10=905935=1#post905935
*Players:* SliMP3,Squeezebox3
Hi All,
Apologies if the question was already asked but is there a way to use
the Justboom Smart Remote (USB) with PCP?
Thx
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread:
Not sure if this is a jivelite request or not, bit would love to see
this information on tjr Now Playing screens and elsewhere... Similar to
Squeeze Ctrl on Android.
kbeast's Profile:
Not sure where this falls, if its a jivelite thing or not. But was
wonderinv if possible to add bot depth and sample rate info onto the now
playing screens/vu metera
kbeast's Profile:
Got my Picoreplayer back up and running now that sourceforge is back up.
Made sure both Simple mixer controls were checked, didn't have the .80
checked before. For now left DSP filter at FIR setting, I'll see what
the others do tomorrow. Also got alsa mixer installed, but haven't
changed anything
paul- wrote:
> We are all stuck with the Sourceforge issues. I've been working on the
> new kernel trees since Christmas, but the kernel was only recently
> stable. We have the new version prepared, but have been unable to do
> any significant testing. And if we just released as is, you
edwardthern wrote:
> Yes V3.22 is very stable, been running it at various places around the
> house with no problems.
>
> With that said, any news on a version bump? The Kernel and Firmware
> both have progressed quite a bit since last Sept.
We are all stuck with the Sourceforge issues.
Setting the password can be a little confusing.
1) Install Samba
2) Set server name, workgroup and shared name/directory
3) Make sure server is running
4) Set password.
When you connect to the share, you will need to specify the username as
"tc" with the password you just set.
paul- wrote:
> You have to have a password defined.
Hi,
Thanks for the replies!
I have tried with a password set first of all (I only tried without, to
see if it would make a difference), still without success. Thanks.
Regards,
Toonie.
Toonie wrote:
>
>
> The mounted USB stick is formatted NTFS, and the NTFS file system is
> installed, and I play from it fine. From my Linux PC (Linux Mint 17.3) I
> can see the server name, but it always times out if I try and connect to
> it. From a Windows PC (Windows 10) I can get a little
Toonie wrote:
> Hi,
>
> Another plea of help I'm afraid :-( I've been running PCP V3.22 since
> it was released, and generally I've very happy. Certainly very stable.
> So very well done!!
>
> Toonie.
Yes V3.22 is very stable, been running it at various places around the
house with no
Hi,
Another plea of help I'm afraid :-( I've been running PCP V3.22 since
it was released, and generally I've very happy. Certainly very stable.
So very well done!!
I have a Pi 2 B+ connected via ethernet, with fixed IP addr which has
the LMS server running, as well as 3 Pi Zero Ws connected
paul- wrote:
> So GPIO 13/ pin 33 is used to toggle the power. We could use the
> python scripts to do this, but then we need to install python...
>
> I'm thinking that SqueezeButtonPi Daemon
>
Greg Erskine wrote:
>
>
> We are waiting to release the next version of piCorePlayer before we do
> any more code changes.
so can you tease us with what is new? and when can we expect it assuming
SF is up and running
Stoker wrote:
> There is the ALSA 10 Band Equalizer which is available from the 'Tweaks'
> tab of the webUI (need to be in advanced or beta mode, available at
> bottom of browser window). I've only played with it myself but it does
> work.
>
> However, if the vocals really are that 'low'
Thanks Greg. I can do that.
Main system - Rock Solid with LMS 7.9 on WHS 2011 - 2 Duets and
Squeeseslave
Portable system - Rock solid with LMS 7.9 on Win10 Pro - 1 Duet and
Squeezeslave
w3wilkes's Profile:
w3wilkes wrote:
> Dumb question... I told picoreplayer to update squeezelite. It failed
> because sourceforge is down. Now my picoreplayer has no squeezelite. Any
> remedy other than waiting on sourceforge?
Hi w3wilkes,
I found this issue as well. The extended SourceForge outage has
aphonia wrote:
> Thanks for checking, it's a pitty. I went through the related
> discussions at the element14 Community (e.g. here: 'Pi Desktop - control
> power by button'
> (https://www.element14.com/community/thread/62468/l/pi-desktop-control-power-by-button))
> and found out that there are
Dumb question... I told picoreplayer to update squeezelite. It failed
because sourceforge is down. Now my picoreplayer has no squeezelite. Any
remedy other than waiting on sourceforge?
Main system - Rock Solid with LMS 7.9 on WHS 2011 - 2 Duets and
Squeeseslave
Portable system - Rock solid
Racerx1977 wrote:
> Hi all,
>
> anyone else experiencing problems with the connection to the sourceforge
> repository?
>
>
> Thanks for any hints...
>From the Sourceforge status page
"The sourceforge.net website is temporarily in static offline mode.
Only a very limited set of project pages
w3wilkes wrote:
> I built a PiCorePlayer using a Raspberry Pi 3 model B and Hifiberry DAC+
> Pro. Went together without a hitch. Installed Picoreplayer 3.22 (not
> audio) and that went well. I've now got it all working on my wifi
> network, but I have an audio problem. For the most part it's
Hi all,
anyone else experiencing problems with the connection to the sourceforge
repository?
Did the path change, because i can browse it from the browser, but pcp
doesn't find it
24639
Thanks for any hints...
+---+
I built a PiCorePlayer using a Raspberry Pi 3 model B and Hifiberry DAC+
Pro. Went together without a hitch. Installed Picoreplayer 3.22 (not
audio) and that went well. I've now got it all working on my wifi
network, but I have an audio problem. For the most part it's great (by
this I mean the
aphonia wrote:
> https://www.element14.com/community/docs/DOC-83477
>
That package at this link is just some python scripts that mostly wont
apply to pCP. There is nothing in the source that describes how the
power button is connected.
aphonia wrote:
> It would be appreciated Paul, especially to enable the Pi Desktop On/Off
> power switch button to be utilized to perform the implemented "soft"
> shutdown ("button pressed for approx. 2 seconds" according to the User
> manual) and not only to force shutdown ("button pressed for
Howard Passman wrote:
> Still.Amazing.
>
> Probably a stupid question, but is there a mirror repository for the
> picoreplayer files?
>
> Thanks,
>
> Howard
Unfortunately no.
paul-'s Profile:
Still.Amazing.
Probably a stupid question, but is there a mirror repository for the
picoreplayer files?
Thanks,
Howard
Can I go home now?
Howard Passman's Profile:
It is $80 US dollars, and it doesnt come with an msata card..so
its a bit much for me to buy. But Ill help With packaging extra
drivers if needed.
paul-'s Profile:
paul- wrote:
> The Real time clock stuff should not be a problem, we already provide a
> rtc kernel module package. I'm not sure what driver/software is used
> for that mSata card usb card, but likely is already included in pCP.
>
> So the only thing left is a simple power on/off GPIO
d6jg wrote:
> Apologies if this has already come up recently but I just spotted this
> https://thepihut.com/products/raspberry-pi-3-desktop-kit#fo_c=1889_k=84067d9f1c931c1a393ca0bb4d08e44a_s=fbplagb
>
> Any chance piCorePlayer could be made to support the addon card and
> associated SSD drive?
1 - 100 of 1340 matches
Mail list logo
