hi sbp,
I've been using your piCorePlayer for a couple of weeks and it is a
perfect fit for me (DIY audio). I have been very impressed considering I
am using a very cheap USB DAC (using SPDIF out) that I bought only to
experiment with. Surprisingly this basic and cheap piece of hardware
produces
Hi Steen,
On your news page you describe version 1.15e but say try 1.15c.
May 7 2014
Hi Now I think we have nailed the problem with the latest
USB-development. In piCorePlayer*1.15e* the USB audio is now as good as
with piCorePlayer1.15c and the I2S-audio cards problems and the analog
hi schreijr,
When you run top you should see something like the following near the
top of the list.
/mnt/mmcblk0p2/tce/squeezelite-armv6hf -n YourpiCorePlayerName
regards
Greg Erskine's Profile:
schreijr wrote:
With your help and a bit more trouble shooting I may have found the
issue. When looking at the top command I would see what you described
and it would go away right after I switched to the I2S-audio Digi
(HifiBerry I2S Digi) option. Well as it turns out...I don't have that
garrettwp wrote:
I do not see this option in my configs.
NAME=Office
OUTPUT=hw:CARD=MicroII,DEV=0
ALSA_PARAMS=80:4::
BUFFER_SIZE=
CODEC=
PRIORITY=
MAX_RATE=
UPSAMPLE=
MAC_ADDRESS=XX:XX:XX:XX:XX:XX
SERVER_IP=XXX.XXX.XXX
LOGLEVEL=
LOGFILE=
DSDOUT=
VISULIZER=
OTHER=
AUDIO=USB
nr002541 wrote:
Seems i spoke too soon. Does anyone else have any ideas why one of my
players wont show up/ i have tried changing mac adress in the settings
hi nr002541,
I can't give you an answer, but I have multi piCorePlayers running OK. I
just create a fresh SD card, change Output (press
werewolf_fr wrote:
Hello all
No help to my little problem !? I would just know how to set a default
also mixer volume, much more high (100%) than the current one...
Everytime i start the picoreplayer I need to go to SSH and set alsa
mixer volume... I would just need to make it permanent.
CyberDannen wrote:
very good project, helps a lot. But I had a feature request. Is it
possible to use a radio transmitter on autostart directly from the start
playback? I use squeezy, but can not be installed in the PicoPlayer
unfortunately. https://code.google.com/p/squeezy/
Hi
Hi all,
I was wondering if there was a way to determine which LMS server
Squeezelite has connected to when it has used autodiscovery.
I couldn't see an option in the help and I checked for an environment
variable.
I am using telnet to control Squeezelite and it would be nice if I could
hi rederikus,
Have you tried setting the MAC address on the Squeezelite Settings page
(second tab)?
Squeezelite Settings - Change Squeezelite settings - MAC address.
Press the [Submit] button to update your configuration. Restart
Squeezelite from the Main page.
You can use the command ps -ed
rederikus wrote:
Hi Greg,
Thanks for your help. That worked perfectly. I had been using PuTTY to
set the MAC address and could not make it work. Once I tried using the
web interface IP:8077/ I was able to cut and paste the MAC address with
no problem. As you suggested, a quick reboot
steffen wrote:
Now with the version 1.16 i checked again my Sony Playstation Pulse
Headset (Wireless Headset with USB-Dac) and now it works fine.
Seems that there are new Drivers. *hrray*
I have a small issue and a question.
1. i have to launch squeezelite manually in the browser
When you do a ./squeezelite -? you get this:
Code:
-c codec1,codec2 Restrict codecs to those specified, otherwise load
all available codecs; known codecs: flac,pcm,mp3,ogg,aac,wma,alac,dsd (mad,mpg
for specific mp3 codec)
Refer
spedinfargo wrote:
One other quick question: if I added an IR Receiver to my RPI board
would I be able to get Squeezelite to respond to it? I've done some
custom IR stuff through LMS before - mainly looking at quick access to
presets, volume, next track, etc.
Hi spedinfargo,
This may be
hi MillmoorRon,
I did this last week. Here's a snippet of code.
$LMSIP is the IP address of your LMS server. You need to preface each
command with the player MAC address if you have multiple Squeeze
devices.
Code:
# $LMSIP, the LMS server ip address, needs to be
.
In an ideal world, there would be a way to send commands to squeezelite
-- which already knows all this information -- and have it send the
appropriate protocol messages to LMS.
Has anyone else tackled this? Any suggestions on how to proceed?
Good question. I am doing the same thing.
Greg
larsks wrote:
I have uploaded some patches to squeezelite here:
https://code.google.com/r/larsks-squeezelite/source/list?name=feature%2Fwrite-metadata
These changes introduce a new -D filename option which, when
specified, will cause squeezelite to write out information to the named
alnames wrote:
This is my first time and I'm having difficulty installing piCorePlayer
1.6. During the start up it hangs on Starting Squeezelite right after
Starting OliWeb and won't proceed any further. I've also tried v1.6a
with the same results. I am attempting to install this on a RPi
alnames wrote:
Update: I got piCorePlayer working on a RPi B+ by following Greg's
example. Thanks for the help.
Good news. Thanks for letting us know. This should give Steen a good
lead to get things going on the Raspberry Pi B+.
hi tfec,
That is a really neat solution.:D
It is recommended that the i2s cables be as short as possible but I
think it will make little difference. If you get the urge to do a little
rewiring I'd be interested in your impressions.
regards
JackOfAll wrote:
Yes, does seem to be more to it. I updated a 1.16 image to 1.16a and
moved it to a B+. Didn't boot. Was going to take a look, plugged 3 wire
serial to USB into the header, expecting a serial console as a starting
point. Damn, no serial console! No time to look at this
alnames wrote:
Well, the exact chain of events was to reboot on the 'B' (on ethernet)
while connected to a TV via HDMI and making sure the info on the TV
showed Starting Squeezelite without errors. Then I would verify I
could stream music to it from LMS (with output via HDMI). Then I
JackOfAll wrote:
Just a heads-up, on the kernel side... You might want to make sure you
have this patch for the DIY I2S junkies to have working I2S output from
GPIO 18-21 on the B+ main header. 'Configure GPIOs for I2S based on
revision/card settings'
sbp wrote:
Hi Greg
We (bmarkus or me) compile our own kernel from the raspberry github, and
as far as I understand it the B+ model needs the newest kernel in order
for the USB and LAN to function, but actually I think that these changes
have been in the kernel for a long time, and
Chluz wrote:
Hi,
I've had picoreplayer working flawlessly on a raspberry pi with
TL-WN725N v2 wifi adapter, 4GB SD card from kingston and 1200mA power
adapter.
I then bought a new raspberry pi, with all the same hardware (the sd
card came from a twin pack with the old).
I'm having
Chluz wrote:
Ok, after testing with all my power adapters, both branded and
unbranded, the best I could get was 4.80V (with the power adapter I had
bought specifically for the pi and which works fine on the other pi as
well)
With that power adapter I still get wifi dropouts.
Using a USB
JackOfAll wrote:
Interestingly, the B+ does seem to have resolved the USB hotplug
crashes. And an external (but powered by USB bus) USB drive is now
possible. Used to have to use a powered hub for that before..)
Hi JackOfAll,
Yes, I have stopped using a hub on the model B+ and the PSU that
ballin wrote:
First off fantastic product, I love it, but one question
I want to install motion alongside so I can use this player as a
security camera. I cannot find how to do this though, and it doesn't
show up when I use tce.
Is it possible?
Hi ballin,
I think this is a Tiny
Steve Agnew wrote:
After struggling to get wireless working on my network using a Comfast
WU715N USB adaptor, I finally got it to work by using the s: syntax for
my WEP password thanks to an earlier poster.
Steen do you think it is worth mentioning the s:Password prefix on the
Wireless
Xarfay wrote:
Hi again,
is it possible to let the picoplayer auto-start the playback (maybe a
pre-defined playlist or stream) directly after the boot process?
I'm not familiar with the whole tinycore architecture. But I guess I can
modify a startup script somewhere?
Cheers
hi Xarfay,
I
minscof wrote:
Hi,
I use picoreplayer v1.16a (but it displays v1.16 only) and I have
trouble to get stereo sound with the *analog audio* output
I don't understand why it is not stereo (I confirm that audio is only
mono on the right channel) , can you help me ?
Thanks
Minscof
Hi
Wirrunna wrote:
Thank you Steen Greg for the update. Works fine.
Thanks Wirrunna for the report.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
hi Howardyiu,
Can I just confirm that you are new to LMS and the Squeezeboxs in
general?
Have you used LMS with other devices? Is it working?
regards
Greg Erskine's Profile:
Howardyiu wrote:
hi steen!
i m fine with controlling via the web-gui, confi and everything, also i
hv updated to 1.17a, but also showing 1.17 only.. i may try to re-burn
the 1.17a image again and report if there is any problem. and i m using
MAC OS then can't use the putty...
if i
alnames wrote:
Update to my earlier post. I was able to enter the LMS IP:Port on each
Pi (one at a time) and retain basic functionality. However, once the Pi
was rebooted it was no longer recognized by the LMS. I could still
access each Pi's Web Server and was able to restore each Pi back to
SamS wrote:
Steen, just FYI, I can never do the web upgrade. Even after a complete
reformat/re-image. What could be causing this?
I get all the correct prompts through the interface, files download and
it says success. I get all the way to Reboot and you will have 1.17a.
When I reboot,
nietgiftig wrote:
Witch partition is to small, the FAT32 or the rootfs ?
The piCore image makes a 20 mB fat32 partion and an ext3 partition on
the card, the rootfs partition can be expanded to sd card size.
If the file is downloaded to the linux partion of the card, then you
must expand
Murphyprecht wrote:
I have a feeling my linux nobbishness is the thing holding me back.
I've sudo vi bootlocal.sh and used 'o' to insert the line then ':x' to
save it.
I've then sudo filetool.sh b and it still disappears.
I feel I'm so close guys what am I doing wrong?
hi Murphyprecht,
coacharnold wrote:
First, let me just say how awesome I think this little OS is
AMAIZING!
Ive got everything working perfect except the WEB GUI.
I'm missing something stupid I know, Ive searched for the answer in the
forum, I didn't see it..
Ive got the most recent build
MikeDaPsych wrote:
Steen, Greg,
Running an in-situ upgrade from 1.17 to 1.17a today, I noticed a couple
of issues:
1) All config was lost, forcing me to re-enter all my settings from
scratch :( This wasn't the case when performing an in-situ upgrade from
1.16 to 1.17.
2) Whilst
coacharnold wrote:
DOes Pi-core have the right stuff to output info from squeeze light to
small LCD via the GPO???
sorry if this is an old topic ... I didn't see it anywhere.
T
Hi coacharnold,
This thread might shed some light.
CommanderROR wrote:
Exactly. I wonder why the functionaly broke and was never fixed...
Hi CommanderROR,
What piCorePlayer version worked for you?
piCorePlayer just starts Squeezelite during the boot process. As far as
I know there was no special code in piCorePlayer to make Squeezelite
work
Linvincible wrote:
Hello,
I added an IR card capable of starting and cutting the power to the pi.
it's from http://www.msldigital.com/ and they provide sh scripts for
other releases here http://www.msldigital.com/pages/more-information/ ,
that I tried
I get the error: can't open
Hi CommanderROR,
I have been testing this for most day, very exciting!!! I had the LMS
web interface viewing what was streaming.
Results with the latest (beta) piCorePlayer.
1. If you pull plug and reconnect within a couple of minutes the
playlist resumes at the beginning of track.
2. If you
Hi Linvincible,
Linvincible wrote:
Hi Greg thanks for your answer,
I can save the scripts in tc's home directory they'll be saved when I
use the Backup utility, I tested that ;o)
piCorePlayer overwrites mydata.tgz during an unpgrade so backup your
scripts somewhere as well.
Then I can
CommanderROR wrote:
@Greg Erskine
Thanks for your research. So LMS is cutting off the playlist after a
while then. Hmmm...
Maybe we should ask Michael for help?
Possibly. It's probably been discussed before I just couldn't narrow
down a search to find the answer. :confused
mcdudeabides wrote:
Man in a van wrote:
I think it may be possible to start something from the command line once
the PiCP powers up. If the following snippet could be introduced in the
startup logic after squeezelite is alive:
Code:
{ echo
alephnull wrote:
mcdudeabides wrote:
I see what that does, but I'd rather not have to enable telnet I
hoping the thread will get someone to put a simple fix in - especially
if this fuctionailty was there orginally.
hi alephnull,
We are already using telnet so it
Linvincible wrote:
back at it
I scripted what''s necessary I think, I have a permission problem
Even if I place the script in tc home directory and give exec rights on
the script (irswith below) I can''t execute
tc@piCorePlayer:~$ ls -l
total 28
-rwxrwxrwx1 tc staff
Linvincible wrote:
Hi, yes I did change the first line to #!/bin/sh
I thought the error message came from rights on the script itself but
they didn't : it was the rights on files accessed inside that mattered.
Weired, usually it says error at line x in these cases...
Anyway I changed the
themystical wrote:
Steen
When you get piCorePlayer working with I2S on the B+, can you please
also advise the pins for I2S on the B+?
My understanding is:
Pin 12 - BCK
Pin 35 - LRCK
Pin 39 - GND
Pin 40 - DATA
but I am not sure.
Hey Steen I forgot to ask if you are using the right
AndyBeevers wrote:
I have purchased the new Pi along with PIDAC+ from hifiberry. Loaded
picoreplayer onto a 4GB card but as soon as I select the HiFiBerry card
the system stops working. I can't even telnet into it. I haven't
connected up a screen yet to see if there are any messages yet. Do
Hammer wrote:
Hi, I just assembled my first piCorePlayer using the B+ hardware and I
am unable to access the web setup page using port 8077. I can putty
into the player and see the command line options and so it appears to be
working. Any thoughts? Listing the alsa devices I see my USB
Linvincible wrote:
hello,
I installed the latest 7.9 LMS build for readynas and my squeezebox
Touch and transporter are recognized, but PiCorePlayer isn't any more!
how can I debug this?
PCplayer status: piCorePlayer v1.17a | piCore v5.3 | Squeezelite v1.6.4
LMS build:
AndyBeevers wrote:
Going back to the hifiberry dac+ please could you let me know when
kernel 3.16 version will becoming out. Or could someone let me know how
I could upgrade it ?
Thanks
Hi AndyBeevers,
Steen has been working on it :) , so it will probably be easier for you
to wait just a
jimzak wrote:
Thank you.
I guess the website needs an update :)
https://sites.google.com/site/picoreplayer/home/how-to-1
J
Oooops. Sorry for the inconvenience.
Hi jimzak,
Steen did put a notice in the News section
https://sites.google.com/site/picoreplayer/home/news and it has been
mudlark wrote:
If problems occur due to issues with how-tos/FAQs, i would suggest a
gentle request for an update.
Trying to get going with some of these devices is often a bit of a
minefield, but remember many of the developers work on their projects
part time and often have several bugs
Everglase wrote:
Hi guys,
I just loaded picoreplayer 1.17a on my Raspberry Pi B and I can not for
the life of me get the analogue 3.5 audio out to work. According to the
picoreplayer website it should work out of the box. I can get the audio
over hdmi to work but I would really like the
Everglase wrote:
So after a bit more playing around I figure out that even though I
select the 3.5m outlet it won't output through it while the HDMI is
plugged in on my original Pi B but works fine on the B+.
Not too sure what was going on there but thanks for the help :)
Jeff
Thanks
SamS wrote:
Ya, the built-in audio is junk, and I plan to get a HiFiBerry Digi+ or
DAC+ soon enough. But I would still like to know understand what exactly
is causing this, and if it can be fixed.
Hi SamS,
I often used Analogue out (into a set of ear buds) while I'm working on
piCorePlayer.
libelah wrote:
Thanks for your reply.
The ssid consists of regular alphanumeric Chars only - like 'mySsid'. No
Umlauts or any other special characters. The PSK currently has a ! and a
$ in it. The rest consists of alphanumeric chars, again no (german)
Umlauts or accents. Like
nietgiftig wrote:
I had to change my pw because of the special chars.
Reading this thread back there were problems, some probably in the web
interface, which did not cope well with some special chars.
I eventually gave up (a pity because i use a long password, and have
lots of devices
magicteddy wrote:
Hi,
Many thanks for your great work and especial for that point above ;)
My Cubi with the LMS once sends a command as soon as the player in the
bathroom is connected after a disconnect:
Code:
echo Bad favorites playlist play item_id:10 |
CommanderROR wrote:
Hi CommanderROR,
I thought we added this autostart option because LMS forgets what the
previous stream was after about 5 minutes.
regards
Greg
Greg Erskine's Profile:
CommanderROR wrote:
@Greg Erskine
Not really. It remembers, but forgets to start the stream when the
Player comes online again. At least that's the way I see it.
Ot forgets it's state, playing or paused and always resumes the
players as paused
Hi CommanderROR,
If that is the case
CommanderROR wrote:
Hmmm... I tried it with play in the lms autostart section under
tweaks but it doesn't seem to work. I'll keep trying...
magicteddy wrote:
Hi Greg,
Many thanks for testing, the playlist is set but does not start :mad:
-andreas
Hi guys,
Have you set Squeezelite server
CommanderROR wrote:
OK, I entered the Server IP, and now I get options to start, stop,
volume and so on. However, they don't actually do anything. I'll try to
find some logs.
The start, stop, volume and so on buttons will only work if there is an
active playlist. Did you have an active
sbp wrote:
Sorry, I can't get it to work either - maybe Greg has an idea.
But is definitely something we need to look into. Also I gave you wrong
info, in order for the simple controls to work, I needed to remove the
port number again.
Steen
My advice to everyone is NOT to use port
Hi All,
I just did another Auto start LMS test using production
piCorePlayer1.18
Initial conditions: playing random playlist
Expected reboot conditions: streaming radio station ABC
Ok
Typed 192.168.1.101 into Squeezelite server IP (no port number, do not
type quotes)
Clicked [Submit]
Cut
johtem wrote:
Hi Greg,
It also works for me! :)
Yeah team! :D
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=97803
w1ntermute wrote:
Just tried pcp 1.18 and it's working out of the box with the above
pinout.
best o/
Good news. Thanks for letting us know. :o
Greg Erskine's Profile:
w1ntermute wrote:
I am using a homebrew hat for the B+ containing an I2S DAC (5102-based,
hifiberry compatible), IR-transceiver and a Mono poweramp (class-D)
which can be switched on/off via GPIO. It all is working fine using the
latest Raspian image, but not yet (of course) on picore.
To
probedb wrote:
Yeah, ideally I want to set a static IP on the player. Getting an
address assigned by DHCP and telling it to keep it isn't the same. It's
just I like the keep certain address ranges for certain component/device
types on my network.
Hi probedb,
I'm a bit old school as well
SamS wrote:
Confirmed, I had the same issue. Removing the spaces did fix.
+1
I have found where the problem is but it's not a simple fix.
You can use underscores _ instead of spaces for the time being. They
seem to work properly.
regards
Greg
johtem wrote:
While my orginal squeezeboxes can play perfect in sync, my picoreplayer
with hifiberry DAC is always slightly out of sync. It's really a
fraction of a second, but noticeable . Is somebody else experiencing
this?
Is there a way to fix it?
LMS 7.7.3, Picoreplayer 1.18,
ralphy wrote:
Perhaps it would be better to use -N /path/to/file/with/player/name
instead of -n playername for squeezelite?
Doing so would fix the problem with spaces and using -N allows server
defined name changes to be shared between servers which is not supported
with -n.
Hi ralphy,
johtem wrote:
After an overnight shutdown of my NAS the picoreplayer will not
automatically reconnect to LMS. Only when i peform a restart of
squeezelite or a reboot of my Picoreplayer it is recognized again.
Is this normal? Is there a way to solve this?
Hi johtem,
I just rebooted my
probedb wrote:
So very easy to get going!!
Thanks to everyone for doing this project. I'll donate when I've been
paid :) My only comment as yet is more to do with the analogue out of
the RPi vs a SB3 in that the SB3 output is louder at Fixed Volume.
However I'm going to get a HifiBerry
muggo wrote:
I'm having trouble getting my new external DAC to work reliably. When
it does work, it won't stream 192kb files.
I think the issue is to do with PiCorePlayer configuration.
I've been advised to post my thread here.
Perhaps my query has already been covered, but with 188 pages
w1ntermute wrote:
..
(BTW, Greg: scp did not work out of the box on latest pcp because
dbclient was not found in the expected path. Linking it fixed the
problem, at least until the next reboot.)
Hi w1ntermute,
This looks like an issue with dropbear or the dropbear extension.
dbclient
bitflusher wrote:
While I am still setting up my system (just moved and new house needed
gadgets) I already love Picoreplayer. There are currently three PI B+
boards hovering around my house. Some with better speakers than others.
Now I am experimenting with multiple instances on one pi.
w1ntermute wrote:
...Greg: are the sources available?
Hi w1ntermute,
piCore source (Tinycore Linux for the pi) is available via ..
couldn't find it. :confused:
sorry
Greg
Greg Erskine's Profile:
mudlark wrote:
Hi, sadly I have to report that my set up will only play up to 24/48 on
both 24/96 and 24/192 files. There are no clicks
Reverted to 1.16 and 24/192 works fine.
Very odd. The player is fine on wired ethernet, but not on wi-fi.
Any ideas chaps?
Bummer mudlark.
ebivan wrote:
Hey Guys,
I just started using LMS in my house. I successfully set up LMS on a
computer, installed XSqueeze on my HTPC running XBMC. So far everything
works fine between these two. Audio and Meta information play instantly
on my HTPC.
Next thing I did was to write an SD
bitflusher wrote:
What i am doing is running two squeezelite instances on one pi.
This is indeed to be able to controll two music streams. a low quality
bathroom player does not have to run all the time but only when people
are in it. It might be a synced stream or something different (a
ebivan wrote:
Hey thanks for the advice. After doing that, the controls in the top bar
of the webgui diappear, so i guess it needs the server adress to find my
server..?
And of course, still only noise...
Hi ebivan,
A completely clean rebuild should work. No settings are required to be
set
lomdar67 wrote:
Anyone else having problems with m4a files and version 1.18/1.18a? Tried
a completeley new installation with 1.18a and after that with 1.18. both
won't play any m4a files. A fresh installation with 1.17 plays the same
files without any problems!
Michael
Hi lomdar67,
Only
probedb wrote:
Sorry for taking so long to get back about this. What commands do I need
to use once SSHed into piCorePlayer to check the volume?
Edit: Using alsamixer it says the volume is at 86% for PCM even though
LMS says it's at 100%.
Edit: ...again, I used the up/down cursor keys
probedb wrote:
Indeed :)
What is the difference with something like the HifiBerry that is I2S and
a USB DAC? Is I2S a different bus in the RPi?
The RPi has 4 audio options:
1. Analog thru headphone jack
2. HDMI (I think I2S may be available thru HDMI)
3. USB
4. I2S thru GPIOs
All (well
JackOfAll wrote:
Greg, forgive me for being pedantic, but I2S is 3 wire, master (MCLK)
isn't part of the spec. ;)
:o You are correct, but MCLK is reasonably important and is often
the 4th connection with the 3 I2S connections between Receiver chip and
DAC chip.
ctbarker32 wrote:
At the risk of angering the powers that be, I was wondering if anyone
could postulate if the Wolfson DAC Pi add-on board will ever be directly
supported by Picoreplayer?
This is about my third request for a response on this subject.
Thank you so much.
hi ctbarker32,
SamS wrote:
If you're using I2S, then getting a coax/optical SPDIF output via
something like a HiFiBerry Digi/+
I would say that is the exception to the rule. Most of the pi I2S boards
have a DAC chip on them. I2S straight into the DAC chip then analog
out.
Yes, if you have an external
JackOfAll wrote:
Greg,
I wasn't aware of that thread. And having read it, on another subject,
having looked in the modules tar ball for the tiny core 3.17.2 kernel
build mentioned in that thread
*Big, fat, hairy warning.* Use the upstream rtl8192 driver at your
peril! Patch back in
TrophyJem wrote:
I am struggling to change the hostname I have used the Tweaks page but
the name reverts to PiCorePlayer
I have also changed the hostname in /opt/bootsync.sh but after reboot it
changes back.
Any ideas what I am doing wrong please?
Hi TrophyJem,
Do you see the message
probedb wrote:
Well it does. It doesn't say that it affects it in anyway. But it does
have to go through a couple of extra steps before it gets to the DAC.
That's all. Nowhere does it say this is bad and detrimental to the
sound.
There are no specs on that DAC so there could be anything
Netzwerkplayer wrote:
Hello,
I have a RPi B with the latest software 1.18b of the Picore-Player.
Sometimes it works without any problem, but sometimes after reboot, the
Logitech Media Server does not regognize the piCore-player. After 2 or 3
reboot trials, sometimes it works and sometimes
c64emulator wrote:
Hi Ralphy,
I'm looking for a picoplayer with a small gui (like this:
http://www.crazy-audio.com/2014/11/a-squeezebox-replacement-based-on-the-hifiberry-dac-and-the-raspberry-pi/)
I have seen that you have made all possible Squeezebox client builds
available. How about
dafiend wrote:
By 'design' work, you mean software design??
No hardware. I design my own circuits and PCBs for amps, power supplies
and soon DACs.
Again, I may be wrong here, but shouldn't a class-compliant USB DAC
actually be less work? For many class-compliant USB DACs, you got
chicamaxi wrote:
Hello, I'm a very happy user of picoreplayer on my raspberry pi's. I'm
using currently 3 pi's in combination with 2 squeezebox radios (were
smart ue before, but reverted to squeezebox [emoji4] ).
I wonder if I can use the squeezebox in the same room as my pi's:
-audio
RoBra81 wrote:
Hello,
first of all: great work and I'm happy that the HifiBerry amp is
supported now!
I have two things/wishes:
1. I want to use google TTS with piCorePlayer but that doesn't work (at
least with the HifiBerry AMP) - is there anything I could do?
2. Would it be possible
1 - 100 of 1928 matches
Mail list logo
