Cited from 5 jpegs taken Six Voltage Meter Triangulation Tests for Time
Distortion Jpegs may also be viewed from commentary on this video if article
shows problems of access.Published on Dec 17, 2015I am beginning to understand
the principles involved with reactive magnifications of energy. If
Axil--
It’s rare that I agree with you, but I do on this one. Especially if the
E-Cat-X make electricity as Rossi suggests, it is a natural for electric cars,
and maybe even back-fitting the electrics of today...Elon take note
Bob Cook
From: Axil Axil
Sent: Friday, February 05, 2016 3:27
Robin--
I think the reaction chamber is in a vacuum. The figure of the machine
depicts a vacuum system. Plasmas generally like vacuums.
Bob Cook
-Original Message-
From: mix...@bigpond.com
Sent: Friday, February 05, 2016 2:54 PM
To: vortex-l@eskimo.com
Subject: Re: [Vo]:BLP demo vi
In reply to David Roberson's message of Fri, 5 Feb 2016 12:34:07 -0500:
Hi,
[snip]
>The document referred to by Axil show that the energy holding capacitors are
>wired up in series/parallel so that they can only deliver an open circuit
>voltage of a bit greater than 5 volts. The design reminds
I think the car examples are because they are easy to communicate.
No serious investor will make that in itself a major factor in an
investment decision, We are talking millions and that is a lot of money
even for the super rich.
Best Regards ,
Lennart Thornros
lenn...@thornros.com
+1 916 436 18
In reply to Ludwik Kowalski's message of Fri, 5 Feb 2016 15:08:48 -0500:
Hi,
>Yes indeed. Experimental data reported by Karabut and his coworkers (from
>Lutch laboratory in Russia) were spectacular, as summarized in:
>
>http://pages.csam.montclair.edu/~kowalski/cf/10lutch.html
>
>and in their l
In reply to Bob Higgins's message of Fri, 5 Feb 2016 09:03:44 -0700:
Hi,
[snip]
>Thank you, Axil, for this link. It is slide 49, in particular to which I
>am making reference. In this slide you can see the soft x-ray set of lines
>around 20-60nm, and another set of deep UV lines from 120-300nm.
In reply to Russ George's message of Fri, 5 Feb 2016 07:24:04 -0800:
Hi Russ,
>I would argue that the present context Mills work better supports a
>philosophical as opposed to scientific discussion. Its much the same as
>Rossis work. The data is lacking so what is there to talk about other tha
I believe that the LENR reaction can be adjusted to provide an output that
is more well suited for the auto market. Both Mills and Papp generate a
large amount of XUV and x-ray EMF, but papp added xenon (Xe) and other
noble gases to his fuel mixture. These additions convert XUV and x-rays
into clu
Here is a nifty data browser for electricity net generation:
http://www.eia.gov/electricity/data/browser/?src=home-f1
It shows the rise of gas and wind energy, and the fall of coal. It shows
wind overtaking hydro.
This is actual net generation, not capacity.
Move the cursor to the graph lines t
Bob--
Thoria melts at about 3600 K. It would erode pretty fast at 5000 K. So the
time that is pretty fast would be seconds to minutes for a reasonable thick
block of thoria.
Iridium Oxide or just iridium melt at a lower temperature. Not may substances
have a melting point above 3500 K.
B
In reply to David Roberson's message of Fri, 5 Feb 2016 01:50:14 -0500:
Hi,
[snip]
>I suppose the question is; How inefficient does the solar cell array become
>when the device is throttled back significantly? Since all the power
>eventually becomes radiated, the black body temperature must be
The amount and wide range of nuclear activity is what I had seen as
speaking against the Hydrino chemical only model.
On Fri, Feb 5, 2016 at 4:43 PM, Jones Beene wrote:
> *From:* Axil Axil
>
>
>
> Ø The Karabut experiment also undercuts the Mill's Hydrino conjecture.
>
>
>
> More like reinforc
From: Axil Axil
Ø The Karabut experiment also undercuts the Mill's Hydrino conjecture.
More like reinforces. In fact, Mills would likely say the predicted emission
spectra supports his theory since it corresponds to a deep Rydberg level.
Interesting to me is that the emission peak
Bob Cook wrote:
> The idea of making the device good for a car to justify its rapid
> introduction commercially was just a pipe dream for gullible investors in
> my mind.
>
Yes. Cold fusion researchers, "over unity" energy researchers and others
are mesmerized by the automobile market. They have
The Karabut experiment also undercuts the Mill's Hydrino conjecture.
On Fri, Feb 5, 2016 at 3:08 PM, Ludwik Kowalski <
kowals...@mail.montclair.edu> wrote:
> Yes indeed. Experimental data reported by Karabut and his coworkers (from
> Lutch laboratory in Russia) were spectacular, as summarized in
Hi,
On Fri, Feb 5, 2016 at 10:26 AM, Russ George wrote:
Well we can only hope… I think when he looks as I have he will see which
> silver isotope is peculiar. Whether that adds insight or confusion is
> another question.
In your own case, what isotope changes have you seen in silver?
Eric
On Fri, Feb 5, 2016 at 9:09 AM, Bob Higgins
wrote:
If there was any evidence that Mills was producing something other than
> resistive plasma heating, *perhaps* the spectrum was some evidence.
>
This is a question I'm interested in -- (a) for the latest prototype, are
there regularly spectra wit
Yes indeed. Experimental data reported by Karabut and his coworkers (from Lutch
laboratory in Russia) were spectacular, as summarized in:
http://pages.csam.montclair.edu/~kowalski/cf/10lutch.html
and in their later ICCF reports. Their apparatus was quite simple.
Unfortunately, I am not aware
>From what I took away from the Mills demo, Mills says that he uses
fluorescence to convert and downshift the XUV and X-ray EMF into the
visible spectrum. I don't recall exactly, but Mills says that he is using
some sulfate to do this light frequency downshifting. He must do this to
get the EMF int
My take on the curves shown after slide 49 is that they were showing
evolution of the spectrum. As the machine and Ag vapor gets hotter and
hotter, the spectrum will begin to be dominated/overwhelmed by blackbody
radiation. What is heated to those temperatures is Ag vapor. I am not
sure exactly
a lot to read,see and think over. Or through.
it is here
http://egooutpeters.blogspot.ro/2016/02/feb-5-2016-lenr-and-hydrino-energy-info.html
peter
--
Dr. Peter Gluck
Cluj, Romania
http://egooutpeters.blogspot.com
The document referred to by Axil show that the energy holding capacitors are
wired up in series/parallel so that they can only deliver an open circuit
voltage of a bit greater than 5 volts. The design reminds me of a rail gun
where the conductive silver fuel drops act as a switch that allows th
Bob--
Look at slides that follow #49—like about 57 and 60 or so. The first is a
multi-colored spectrum of some different runs I believe in Nano meters up to
about 500. And the second is a calculated spectrum for a black body for 5000 D
Kelvin. Note that the multi-colored graph shows each r
Bob,
I am sure you realize I am speculating about this subject. Logic would suggest
that the plasma can be heated to very high temperatures by current flowing
within its mass. It would seem to me that the application of additional power
would result in a higher temperature regardless of the so
Bob and Dave--
I was surprised by Mill’s lack of any input power statement. He seemed to
avoid the issue with only discussion of amps of current during, I assumed each
millisecond cycle. The exact timing of the voltage at 10 volts vs the
amperage at the same time would be more instructive.
Well we can only hope… I think when he looks as I have he will see which silver
isotope is peculiar. Whether that adds insight or confusion is another question.
From: Axil Axil [mailto:janap...@gmail.com]
Sent: Friday, February 5, 2016 7:35 AM
To: vortex-l
Subject: Re: [Vo]:BLP demo video
Thank you, Axil, for this link. It is slide 49, in particular to which I
am making reference. In this slide you can see the soft x-ray set of lines
around 20-60nm, and another set of deep UV lines from 120-300nm. What I
was saying is that the band from 120-300nm is explain-able from the 10V
sour
From: Bob Higgins
* Even still, Mills provided NO EVIDENCE for excess heat at all - zero,
zip, nada. This doesn't mean he is not realizing excess heat, he simply
provided no evidence for it.
Yes. This was my main complaint in an earlier posting about the failings of
this demo. The enti
Dear Russ,
Mills wll never give isotopic data because that info would undercut the
hydrino theory in preference for the LENR theory. Hydrinos have no nuclear
impact whereas LENR does.
On Fri, Feb 5, 2016 at 10:24 AM, Russ George wrote:
> I would argue that the present context Mills work better
Sorry, Bob rather than Dave
On Fri, Feb 5, 2016 at 10:31 AM, Axil Axil wrote:
> Dear Dave,
>
> This may help
>
>
> http://brilliantlightpower.com/wp-content/uploads/pdf/TechnicalPresentation1.8.16.pdf
>
> These are the slides used in the demo
>
> Slide 53 and/or 57 are what you might need to see
Dear Dave,
This may help
http://brilliantlightpower.com/wp-content/uploads/pdf/TechnicalPresentation1.8.16.pdf
These are the slides used in the demo
Slide 53 and/or 57 are what you might need to see what you want.
On Fri, Feb 5, 2016 at 10:24 AM, Bob Higgins
wrote:
> Dave,
> I am not sure wh
Dave,
I am not sure what you say is entirely true. The 10V source can provide
direct heating to a certain temperature, and can create a plasma from
electron impact. A plasma is comprised of ionized gas. However, the ions
don't need to be bare nuclei, and typically are not for anything but a
hydr
I would argue that the present context Mills work better supports a
philosophical as opposed to scientific discussion. It’s much the same as
Rossi’s work. The data is lacking so what is there to talk about other than
appearances. For me Mill’s engine core is such a perfect facsimile to
Roddenbe
In the presentation, Mills showed the spectrum from Ag plasma. It included
a soft x-ray band of lines and a UV band of lines. The spectrum did not
look blackbody. If there was any evidence that Mills was producing
something other than resistive plasma heating, *perhaps* the spectrum was
some evi
Dave wrote:
"If my above thought process is accurate then a 1 volt source would be
capable of initiating 10 eV radiation if it can supply enough local heat to
the system and that energy of radiation is possible when the ion
recombines. Perhaps we should not be too concerned about the source
voltag
36 matches
Mail list logo