The red is simply 2 channels of F/H with only one message in each. The blue is
2 channels each having 2 messages.Therefore they are both F/H. MSHV does not
do F/H. They do multi-channel single message which is compatible with standard
FT8.
de Mike W9MDB
On Friday, March 22, 2019,
But...assuming I'm reading the code correctly...
if m_nFoxReq == 601 then nfreq = 301 -- right on top of the Fox freq.
On Tuesday, March 19, 2019, 10:01:17 AM CDT, Joe Taylor
wrote:
On 3/19/2019 10:43 AM, Black Michael W9MDB via wsjt-devel wrote:
> There's a possible bug in the
There's a possible bug in the Hound moving logic where TX3 gets shifted.
Shouldn't the m_nFoxFreq>600 be n_nFoxFreq>900??
if (m_nSentFoxRrpt==2 and m_ntx==3) { // move off the
original Fox frequency on subsequent tries of Tx3 int
nfreq=m_nFoxFreq + 300;
Seems that we need a warning popup if you try and transmit < 1000 offset while
Hound.Seeing numerous trying to do that who obviously didn't read and/or
understand the directions.
de Mike W9MDB
___
wsjt-devel mailing list
connecting to
antennas. Thanks for the reply.
On Thu, Mar 14, 2019 at 8:35 PM Black Michael via wsjt-devel
wrote:
Do you still get rig control errors when you use minimum (or no) power?
I suspect RFI showing up on 30M causing the problem. Chokes on the USB cables?
Ethernet cables? All cables
You didn't show enough of a screenshot so we can see if you are in Hound mode...
Are you?
de Mike W9MDB
On Friday, March 15, 2019, 7:59:45 AM CDT, Alessandro Graziani
wrote:
Since I installed the new version (WSJT-X v2.0.1 7ddcb7) seems that on FT8
DXpedition mode (Hound) the
Do you still get rig control errors when you use minimum (or no) power?
I suspect RFI showing up on 30M causing the problem. Chokes on the USB cables?
Ethernet cables? All cables?
de Mike W9MDB
On Thursday, March 14, 2019, 6:33:24 PM CDT, Lester Sousley
wrote:
I am using WSJT-x
It's probably people who have their rig audio as the default audio device.You'd
hear all the computer sounds..Frequently the Microsoft updates reset all the
USB devicessighand you have to reset your default devices away from
your rig.
Do you have a wav file that you've saved with such
It's only in the source code in NetworkMessage.hpp
And, as for Laurie's question...it's a new feature.
* Logged ADIF Out 12 quint32 *
Id (unique key) utf8 * ADIF text
utf8 * * The logged ADIF
n 3/9/19 9:59 PM, Black Michael via wsjt-devel wrote:
What rig do you have?
If you run rigctld-wstjx with 5 v's you can see what it's doing and let us
see it too when it gets the error.
rigctld-wsjtx -r com1 -s 9600 -v
de Mike W9
What rig do you have?
If you run rigctld-wstjx with 5 v's you can see what it's doing and let us see
it too when it gets the error.
rigctld-wsjtx -r com1 -s 9600 -v
de Mike W9MDB
On Saturday, March 9, 2019, 8:32:58 PM CST, Dave J Barnes
wrote:
Linux Ubuntu 18.04.2 AMD64
You most certainly can share the rig amongst several programsas long as the
program isn't actively trying to do anything with the rig which I haven't found
one yet that conflicts.
Now you have 3 ways to do this.
FlRigrigctld-wsjtxrigctlcom-wsjtx
It all depends on what your ham application
Double-clicking on GW0TSM here does not work. Nothing happens.
de Mike W9MDB___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
s:
http://aa4m.com/links/Flatten_Off.jpg
That's definitely not the fix!
73
On 2019-03-04 06:39:47, Black Michael via wsjt-devel wrote:
What does it look like with Flatten turned off?
de Mike W9MDB
On Monday, March 4, 2019, 7:36:18 AM CST, Bill Mull
What does it look like with Flatten turned off?
de Mike W9MDB
On Monday, March 4, 2019, 7:36:18 AM CST, Bill Mullin
wrote:
I have "dead space" running from about 1300 - 1700 on all bands:
http://aa4m.com/links/Problem.jpg
This screen capture shows that this dead space is in
-A is the active VFO; VFO-B does not get set with a band
change until you transmit.
I just hit WSJT-X's "Tune" button for a second when switching bands. Works fine
on the IC-7300 with tune-on-PTT enabled.
73 Paul K6PO
On Sun, Mar 3, 2019 at 12:56 PM Black Michael via wsjt-devel
wro
Also when switching bands should set VFO-B too for split operation if
appropriate.
Mike
On Sunday, March 3, 2019, 2:56:29 PM CST, Black Michael via wsjt-devel
wrote:
Found an undesirable behavior that I think can be easily fixed.
On ICOM rigs hamlib assumes split is always on VFOB
Found an undesirable behavior that I think can be easily fixed.
On ICOM rigs hamlib assumes split is always on VFOB to cover rigs without
status commands...as does FLRig (and perhaps others).
If VFO-B is the active VFO and you switch bands on WSJT-X only VFOB gets
set...VFOA does not change...so
Friend of mine saw this.CO2VDD replied to WA1SXK R+07 but then decided to
finish a QSO with IZ6AAW and WJST-X then decided to send TX1 when it should
have sent TX3 again.
de Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Nick...would like to know if this code change allows WSJT-X to work with your
system.
If it does I can make this a permanent change to hamlib
In netrigctl.c change this block len = sprintf(cmd, "\\chk_vfo\n"); ret =
netrigctl_transaction(rig, cmd, len, buf); if (ret <= 0) return (ret < 0) ?
Run that with 5 v's.
rigctl -m 105 -r /dev/ttyUSB0 -s 4800 -v
de Mike W9MDB
On Saturday, February 23, 2019, 11:40:33 PM CST, Shane Stroud
wrote:
Here's something interesting. I don't think it's an issue with wsjt. Below
is the result of my tinkering with rigctl. Every time
Last link was broken
https://www.dropbox.com/s/58xc154fg0gjdus/wavfiles.patch?dl=1
On Tuesday, February 12, 2019, 2:19:19 PM CST, Black Michael via wsjt-devel
wrote:
I updated this patch to process and clear the entire killFileQueue when
called.After running a few hours
I updated this patch to process and clear the entire killFileQueue when
called.After running a few hours it was behind in clearing files for some
strange reason as thought the timer didn't fire.
https://www.dropbox.com/s/58xc154fg0gjdus/wavfiles.patch?dl=1
de Mike W9MDB
I normally save all WAV files but did some testing last night with
"None".Overnight 31 files were not deleted (and nothing going on in the
computer).
I changed the killFile logic to use a QQueue and it's behaving perfectly now
with no errors.Could probably clear the queue at shutdown too.
This
since running 8 instances to
take load off the disk.
Thanks anyway for the suggestions.
73;
Bill W2PKY
On Mon, Feb 11, 2019 at 5:19 PM Black Michael via wsjt-devel
wrote:
Windows 10 has Defender by default. You need to exclude the WSJT-X directory
where the supports files
and W.D. is off.The Production Version does not save any
files.I run a small RAM Disk for the wav file directory since running 8
instances to take load off the disk.Thanks anyway for the suggestions.
73;Bill W2PKY
On Mon, Feb 11, 2019 at 5:19 PM Black Michael via wsjt-devel
wrote:
Windows 10 has
beyond the
start of the program.Thanks for the debugging version.
Bill W2PKY
On Mon, Feb 11, 2019 at 4:46 PM Black Michael via wsjt-devel
wrote:
That patch has (i.e. should have) no effect on wav files being saved at all.
I would suspect something else is wrong is you have wav files being saved
PM CST, Bill Barrett
wrote:
Hi Mike-
Tried your patch version, seems to be saving many wave files even though the
save none option is checked.
Bill W2PKY
On Mon, Feb 11, 2019 at 12:01 PM Black Michael via wsjt-devel
wrote:
This patch shows audio catchups and dropouts and is otherwise
on Pi , any
chance?
David M Montee kO3O
Sent from my iPhone
On Feb 8, 2019, at 23:21, Black Michael via wsjt-devel
wrote:
Carefully read the directions here.
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.0.0.html#INSTALL_WIN
de Mike W9MDB
On Friday, February 8
Carefully read the directions here.
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.0.0.html#INSTALL_WIN
de Mike W9MDB
On Friday, February 8, 2019, 10:18:25 PM CST, David Montee
wrote:
New to the group and need some help. I am running Windows 7 Home using
I can reproduce this problem. This appears to be a bug in SmartSDR. When
sending TX, then RX with transmit inhibited SmartSDR has a long delay in
responding causing a timeout.
This sequence using rigctld-wsjtx with TX Inhibit causes the Flex to respond
slowly at the "T 0" command.It appears
skills and the effort you put into the project.
73,Steve
On Wed, Feb 6, 2019 at 23:39 Black Michael via wsjt-devel
wrote:
There's actually another problem going on.I worked with Al a bit this afternoon
using rigctld.Al is the 2nd person I'm working with on the same
problemafter
On 07/02/2019 04:36, Black Michael via wsjt-devel wrote:
> There's actually another problem going on.
> I worked with Al a bit this afternoon using rigctld.
> Al is the 2nd person I'm working with on the same problemafter
> this sequence hamlib just loops around the n
the priority of DAX and AUDIODG.exe were elevated
to REALTIME the dropouts still interrupted the audio stream.There so either
AUDIODG.exe is in a loop or something "undiscoverable" is holding up that
process.Would like to have your test version. Thanks;Bill W2PKY
On Wed, Feb 6, 201
If any of you are seeing one of these symptoms.
#1 No decodes when signals are present on the waterfall...decode button will
just "flash". This indicates no WAV file was saved.#2 During decode having to
click Enable Tx or such to get decodes to start working.#3 Any audio glitches
or other
Testing this I do see some more decodes. Good job Iztok.
But on my I5 4-core 8-proc 2..8Ghz it takes almost the full 15-second period to
finish decoding and it' s not using 100% CPU.
This needs to be multi-threaded if possible which seems like it should be
possible.
de Mike W9MDB
Here are some
What rig driver are you using in WSJT-X?
Mike
On Thursday, January 31, 2019, 2:04:49 PM CST, berger...@aol.com
wrote:
FLEX 6700 using DAX audio, WIN 10 ver 1803 OS build 17134.523 HP I7 computer,
SSDR 2.4.9 and WSJT-x V2.0.0
In a message dated 1/31/2019 13:55:26 Eastern Standard
What is your rig and audio setup?
de Mike W9MDB
On Thursday, January 31, 2019, 12:51:07 PM CST, bergeracb--- via wsjt-devel
wrote:
I have been fighting this problem for months so I don't know if it is a
Microsoft update or not.When it strikes me nothing I do to either SSDR or
I guess it was deliberate to include the JT9 frequencies in the FT8 frequency
list for 20M and 40M?
{14074000, Modes::FT8, IARURegions::ALL}, {14076000, Modes::JT65,
IARURegions::ALL}, {14078000, Modes::FT8, IARURegions::ALL},
{14078000, Modes::JT9, IARURegions::ALL},
Here's a patch which adds audio debug to the Band Activity window.I would also
add a patch to the Settings/Audio tab for a checkbox to enable this but since I
don't have access to current source code it's a waste of my time to submit a
patch for that. Perhaps one of the team with code access
I built a special version with some added debug to make seeing the dropouts
easier and observe the behavior. Might be useful to include this in WSJT-X as
a checkbox in the Audio tab.
We determined the audio was buffering OK at startup...several fast events
catching up on the audio buffer. But
It is coded that way. When you start with --rig-name it knows to expect
multiple instances. Without --rig-name it assumes you're running only one and
kills the jt9 process...but doesn't kill the wsjtx process...which seems wrong.
I suppose it's possible to make that check a bit better to allow
9, 5:22:36 PM CST, Bill Somerville
wrote:
On 24/01/2019 23:07, Black Michael via wsjt-devel wrote:
> And where does this serialization take place? Are you saying it's a
> default condition of Qt to serialize across event boundaries?
>
> de Mike W9MDB
>
Mike,
you need to read
And where does this serialization take place? Are you saying it's a default
condition of Qt to serialize across event boundaries?
de Mike W9MDB
On Thursday, January 24, 2019, 4:05:37 PM CST, Bill Somerville
wrote:
On 24/01/2019 21:07, Black Michael via wsjt-devel wrote
SPLIT: off; PTT: off)
On Thursday, January 24, 2019, 4:05:37 PM CST, Bill Somerville
wrote:
On 24/01/2019 21:07, Black Michael via wsjt-devel wrote:
If appears to me that the new_state variable is passed by reference to the
update event and it may be losing scope before being handled.
I'm working with a user who was running a Flex and split=Fake It.
The last line of his debug log showed this:[20190124 06:32:15.061 Eastern
Standard Time D] C:\JTSDK-Tools\tmp\wsjtx\EmulateSplitTransceiver.cpp:41 -
EmulateSplitTransceiver::handle_update: from wrapped:
It's a bug in the 2.0.0 version where the "Retain" checkbox is not being
honored.
It's been fixed for the next version.
de Mike W9MDB
On Wednesday, January 23, 2019, 2:07:38 PM CST, Lorin Hollander
wrote:
Hi Bill, Mike and the others who kindly answered my question and addressed
I can confirm "CQ DX WA1PGB/6" works in 1.9.1 but not 2.0.0...you're solution
right now is to drop the "DX" and the grid. The grid doesn't work either and
drops the suffix. In 1.9.1 it dropped the grid and kept the suffix.
C:\WSJT\wsjtx\bin>ft8code.exe "CQ WA1PGB/6 EM49" Message
and advice.
And as to where I should enter station snd personal information so that this
will be included as autofill in the Log Window fields? Where do I enter that
data?
Thanks again
Lorin
Sent from my iPhone
On Jan 23, 2019, at 7:45 AM, Black Michael via wsjt-devel
wrote:
The error
The error tells you -- that record has no call sign. Edit the log file and
remove the record.
The ADIF parsing has been relaxed for the next version but not sure what it
will do a record like this.
Perhaps Bill knows.
de Mike W9MDB
On Wednesday, January 23, 2019, 9:40:35 AM CST, Lorin
Patch to install new hamlib utility rigctlcom for WSJT-X build
https://www.dropbox.com/s/tl33ry57djle9ik/rigctlcom.patch?dl=1
de Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
We need some more information.
What rig?What settings?What error? There is a a Details button on the WJST-X
error box that can be helpful.
The most likely cause of random failures is RFI in the shack. USB cables are
notoriously noisy and need chokes.
de Mike W9MDB
On Tuesday, January
This is actually fixable. WSJT-X (in FT8 mode) depends on 50 data frames from
the sound card. If it doesn't get 50 it doesn't record the wav file. You
can't miss more than about 600ms of audio
This could be changed to always record the WAV file at the end of the transmit
period for the mode
is needed for that?
73
Bill
G4WJS.
On 13/01/2019 16:07, Black Michael via wsjt-devel wrote:
I can add that capability. But I think we need both ATU On/Off and Tune
On/Off
So maybe TUNE 0/1 ATU 0/1
or TUNE 0/1 TUNER 0/1
One being a verb and one being a noun. So TUNE actually sta
I had a test session with one user who can easily reproduce the audio dropouts.
Latency testing shows his system more than capable of handling realtime
audio.I got some timings from the dataSink.The Good plot is a normal/good
decode. One high time period is corrected on the next iteration.The
We need to add one statement here probably
void MainWindow::on_dxCallEntry_textChanged (QString const& call){ m_hisCall =
call; statusChanged(); statusUpdate ();}
Tovoid MainWindow::on_dxCallEntry_textChanged (QString const& call){ m_hisCall
= call; statusChanged(); statusUpdate ();
I need some testers for a new hamlib program I'm calling "rigctlcom". It is a
TS-2000 emulator that will allow programs that don't know FLRig or rigctld to
talk to those two programs.
App->COMX->COMY->rigctlcom->rig
This will allow you to run, for example, N1MM and WSJT-X both accessing your
Sorry...this email was not meant for this list and this link has been removed.
Mike
On Thursday, January 10, 2019, 11:29:37 PM CST, Black Michael
wrote:
Here's a debug version with a few statement that may help pinpoint this
problem.
Unzip this where you want...it will create an
Here's a debug version with a few statement that may help pinpoint this problem.
Unzip this where you want...it will create an "install" directory and need to
run "install\bin\wsjtx"
This will create a file c:\users\[username]\AppData\Local\Temp\WJST-X trace.log
That's what I need with the time
I've worked with two different people today. One on Windows 10, one on Mac OS
10.14.2, one with a K-3, the other with a IC7300 or IC7100 (both have same
problem).
Both have "Save All" enabled. And both have the same problem where the WAV
file is not being saved. For the Window dude it
Try changing the power plan to maximum performance. Sounds like the machine is
slowing down the CPU and affecting the clock. I've seen that problem many
years ago on the first power saving motherboards.
And try Meinberg NTP since it will actually learn your clock driftbut it
can't
You probably don't want to do Fox/Hound for a special event. It's really
designed for DXExpeditions.You're more likely to get people calling you if you
just stick to the normal bands and procedure since nobody will know you are on
the air in some other place.
de Mike W9MDB
On Thursday,
Did you set the contest mode in N1MM to Digital?
See 5.8
herehttp://n1mm.hamdocs.com/tiki-index.php?page=WSJT-X+Decode+List=N1MM+Logger+Documentation
de Mike W9MDB
On Monday, January 7, 2019, 8:24:07 AM CST, Bob VanFossen
wrote:
The logging to N1MM for the RU failed to include the
Paul..would you happen to be on one of the fast rings for Windows 10?
I never had this problem until I reinstalled Windows 10 and it's driving me
batty (not being able to figure out what's going on). But I haven't turned on
the fast ring updates yet.
de Mike W9MDB
On Thursday, January 3,
Err
i3.n3
1. CQ LOTW DG2YBC JO42 CQ LOTW DG2YBC JO42
1. Standard msg
de Mike W9MDB
On Thursday, January 3, 2019, 7:31:47 AM CST, Bill Somerville
wrote:
On 03/01/2019 13:24, Black Michael via wsjt-devel w
Hmmm..I can confirm that it does work from TX6...but not from jt9code where it
shows as free text.
(QT-5.5) C:\WSJT\wsjtx\bin >jt9code.exe "CQ LOTW DG2YBC JO42" Message
Decoded Err? Type
That sounds a lot like RFI. Usually happens on specific bands and certain
power levels.
Check your audio devices in the sound control panel when it happens to see if
audio is going to a different device.
de Mike W9MDB
On Wednesday, January 2, 2019, 10:00:21 PM CST, bergeracb--- via
Couple of ideas
#1 You can actually use speaker/mic to do it so no RF is involved at all.
#2 You can run one computer with two big monitors and run 4 or 5 copies of
WSJT-X all on virtual audio cables.
You can do your own test that way to learn the Fox side a bit better.
de Mike W9MDB
May I suggest the 7.5 reference of an empty hash < . . . > be change to remove
the spaces? Most people won't think to add spaces when searching for this in
the manual.
de Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Right-click Windows icon in lower leftDevice ManagerGo to each USB controller
and each device -- some but not all will have a "Power Management" tab.
Disable the "Allow the computer to turn off this device to save power" option.
Additionally, in the Power & Sleep settings you can go into the
I had to reinstall my Windows 10 system and I see this problem now where I
didn't see it before. I was doing the bleeding edge updates but haven't
re-enable that yet so I was running V2.0 on a more recent Windows builds before
without problem.
If my computer idles for a while the audio output
Version 2.0 is out and you need to upgrade for FT8 and MSK144 as it's no longer
backwards compatible.The pre-2.0 crowd is disappearing fast and 90% have
already converted.
de Mike W9MDB
On Monday, December 31, 2018, 10:47:19 AM CST, Mike Bush
wrote:
Version: v1.9.1
Worked fine for
I got a Pixel Pro 1B antenna and it gave me 7dB more sensitivity over my dipole.
I was doing measurement with another op in my area and could clearly see his
7dB advantage on all bands which disappeared with the loop.
de Mike W9MDB
On Saturday, December 29, 2018, 4:31:40 PM CST, Simon
Known bug. Already fixed in next version.
de Mike W9MDB
On Thursday, December 27, 2018, 6:36:41 AM CST, VE3FBZ
wrote:
Begin forwarded message:
From: VE3FBZ
Date: December 26, 2018 at 12:50:54 PM EST
To: wsjtgr...@yahoogroups.com
Subject: Bug report - non urgent- WSJT-X V2.0.0
Shouldn't your grid and frequency be the log QSO popup?Seems to me all the
information.that goes int the ADIF log should be in the popup.
de Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
Double-clicking does not work on a message when the 1st call is an empty hash.
e.g.<...> W9MDB R-17
Does work OK as long as the hash tags contain a callsign on either call.
de Mike W9MDB
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
I'll mention that I'm working on a new program for hamlib I'm calling rigctlp
that will allow a virtual COM port passthru as a TS-2000 emulator.That way any
program (e.g. N1MM) can set up a TS-2000 on a virtual COM port...which in turn
can talk to FLRig for example which can handle multiple
Q_ENUM was introduced in Qt5.5 and Q_ENUMS
deprecatedhttps://woboq.com/blog/q_enum.html
And I do believe 5.5 is the minimum targeted version.
de Mike W9MDB
On Tuesday, December 18, 2018, 11:00:47 PM CST, Greg Beam
wrote:
Hi Bill,
Source:
What OS are you on? If Windows 7 place keep reading section 3.1 of the manual
to download the 2013 runtime libraries.
de Mike W9MDB
On Monday, December 17, 2018, 12:14:14 PM CST, Scotty W7PSK
wrote:
Yes, Downloaded the exact version numbers and ran twice. Still get the
message.
the software thinks it
should be receiving but the transmitter remains activated...Gary KO3F
On Dec 16, 2018, at 3:50 PM, Black Michael via wsjt-devel
wrote:
I'll add a a ditto to this too...seen this a couple of times now on 2.0.0
de Mike W9MDB
On Sunday, December 16, 2018, 2:47:48 PM CST
Way too many dependencies for what would be a simple URL request as is already
used for the LOTW user file.
All the team needs to do is put a simple file containing a version# and an
optional message on the WSJT-X site.
The version number is just a an integer representation like 200 for the
What do you mean "cat command to both instances"? I guess you mean both
instances controlling the rig? If you're doing different bands that makes no
sense.On the other hand if you use FLRig you can have multiple instances of
WSJT-X all talking to the rig.
de Mike W9MDB
On Friday,
Yes...I guess you have multiple rigs or a Flex?
You can copy the shortcut for WSJT-X on your desktop and modify the target like
this:
C:\WSJT\wsjtx\bin\wsjtx.exe -r rig2
You can call it "rig2" or whatever you'd like (no spaces please).
You will have two separate instances of WSJT-X with two
I think Bill's answer is more likelybut you should only see one file for
every time you close WSJT-X.
But if the virus scanner has the file open for reading when WSJT-X tries to
delete it the delete will silently fail.
Mike
On Thursday, December 13, 2018, 8:32:59 AM CST, Lahra
Everybody should make sure you exclude the WSJT-X configuration directory from
your virus scanner. Otherwise it can be reading files and causing such problem
and just slowing down your system scanning ALL.TXT and such.
Your virus scanner may be causing this problem.
de Mike W9MDB
On
where some frustration
has been noted where people don't search the list or read the manual)
de Mike W9MDB
On Thursday, December 13, 2018, 7:04:44 AM CST, Bill Somerville
wrote:
On 13/12/2018 12:42, Black Michael via wsjt-devel wrote:
> May I suggest that if the LOTW color
May I suggest that if the LOTW color coding option is not checked (and it looks
like it defaults to off) that WSJT-X not download the lotw user file.
Otherwise this question about the SSL error is going to go on forever for every
new user that downloads WSJT-X.
Then...when it's enabled pop up a
Friend of mine had problems with the new V2.0His ADIF log was not properly
formatted and got an error that only lasted 1 or 2 seconds and WSJT-X shut down.
Perhaps a better error message, maybe alllowing renaming of ADIF file?
Here's the beginning of the ADIF file.
WSJT-X ADIF
Same here on Windows on both 1.9.1 and 2.0rc5...so not just you :-)
de Mike W9MDB
On Monday, December 10, 2018, 12:17:48 AM CST, Saku wrote:
F3 shortcut keys help says:
That is not true if cursor is
here:
or here:
Then selection list opens with F4
To summarize isn't it safe to say:
"As long most of your DT times are less than 1 second you will be able to
decode everybody else who is less than +/-1 second. WSJT-X allows 2.5 seconds
of difference so if both sides are off by 1 second in opposite directions that
would be 2 seconds of DT and
He's talking about a button, one for +60 and one for -60
de Mike W9MDB
On Wednesday, December 5, 2018, 12:50:55 PM CST, Bill Somerville
wrote:
On 05/12/2018 18:42, Bobby Chandler wrote:
It would be good if there is a way to easily put a tick box on the main
page, maybe near
I can duplicate this problem on RC5. I'm running Windows 10 preview release
but I've seen this problem for a long time.
There have been numerous Qt bug reports about text not fitting in tooltips,
comboboxes, and such and I've seen it a lot on tooltips in WSJT-X.
de Mike W9MDB
On
e why I am not on the logs received... I submited and got the robot
anser with acknowledgement.
maybe I'll show up later.
On Mon, Dec 3, 2018 at 11:26 AM Black Michael via wsjt-devel
wrote:
No...you can name the file with any base name.
de Mike W9MDB
On Monday, December 3, 2018, 10:05:46 AM CST,
No...you can name the file with any base name.
de Mike W9MDB
On Monday, December 3, 2018, 10:05:46 AM CST, Bill Pence
wrote:
Same for me.Is the log required to be .cbf?
On Mon, Dec 3, 2018, 10:55 AM Carey Fisher
wrote:
I saved as the default .cbr but then changed the extension
You can copy the shortcut on your desktop and change the Target to include the
--rig-name value.
de Mike W9MDB
On Sunday, December 2, 2018, 1:54:43 PM CST, Paul Kube
wrote:
Frank -- The only way I know to do this is from the command line.
See
You will have to reset the colors when switching between them.Other than that
nobody has reported any problems flipping back and forth.
de Mike W9MDB
On Sunday, December 2, 2018, 6:53:25 AM CST, Claude Frantz
wrote:
Hi all,
After having used the RC5 version with the same config
What frequency are you on?
On Saturday, December 1, 2018, 10:33:56 PM CST, Dave Barr
wrote:
During the FT8 Roundup, I am decoding only a fraction of the signals I
can hear and see on the water fall. RX selectivity is wide. RF gain
has been lowered. The rx level bar hovers
DId you put your state in the Advanced settings for the RTTY Roundup?
de Mike W9MDB
On Saturday, December 1, 2018, 2:49:09 PM CST, Edfel Rivera
wrote:
Hi All:
For those getting annoyed for the popuo telling invalid QSO, you just have to
fill Rcp Sent and Exc Sent. Nothing more
What's confusing is how people interpret the button.
It's a data-flow indicator showing the direction of data travel - it's not a
button which some seem to interpret as pointing to the thing you want to change.
It takes a bit of getting used to if you have the 2nd interpretation but
eventually
Check the Save Directory path in your TEST1 Settings/AudioI was unable to
reproduce your problem so I suspect you have the same path in both instances
de Mike W9MDB
On Friday, November 30, 2018, 5:13:56 PM CST, David Bean (KC2WUF) via
wsjt-devel wrote:
I just started a new
801 - 900 of 1443 matches
Mail list logo
