now...
Regards,
Derek
On 28/06/15 09:16, Ralf Reköndt wrote:
No, they aren't Hard Devices. Martin has developed an idea from me a s
follows:
I had quite a few games on one flp. And I wanted to put them in a kind
of directory, say Game1_, Game2_ and so on. That was long before TT's
hard
as I know I only have the files which are on the Sinclair QL
Homepage - certainly I can't see anything on my hard disk!
Rich
On 28/06/2015 10:51, Ralf Reköndt wrote:
Rich Mellor has the complete package, as has George Gwilt. So maybe one of
them can send this to Dilwyn.
Cheers...Ralf
I have read the few demo pages at Amazon and find it a bit circumstancially
to use this version as a serious book. I have the native one, and this is a
lot better to flip from page to page and to search for special things.
Cheers...Ralf
- Original Message -
From: Geoff Wicks
As I state: The native printed one is a lot better.
Cheers...Ralf
- Original Message -
From: George Gwilt grggw...@gmail.com
To: ql-us...@q-v-d.com
Sent: Tuesday, November 04, 2014 8:28 PM
Subject: Re: [Ql-Users] OUT NOW!
On 4 Nov 2014, at 19:10, Ralf Reköndt ralf.rekoe...@t
Mayby Dilwyn reminds our venue during Britain in 1995. I have never met such
nice people (using BB and Camping) before. And they all have understand me.
Cheers...Ralf
- Original Message -
From: Dilwyn Jones dil...@evans1511.fsnet.co.uk
To: ql-us...@q-v-d.com
Sent: Friday, October 10,
- Original Message -
From: Ralf Reköndt ralf.rekoe...@t-online.de
To: ql-us...@q-v-d.com
Sent: Friday, October 10, 2014 6:34 PM
Subject: Re: [Ql-Users] QLis30 attendees
Mayby Dilwyn reminds our venue during Britain in 1995. I have never met
such nice people (using BB and Camping
Well, I have tried QLPUI and I can say it is a Brainsmasher. I know, that
TT had a similar one in mind for the QL in the first place but that was
abandoned and after all the FLRUN and DP and whatsoever software it had been
a problem. There had never been an ICE and GIGAmouse and PE, if his
Oh my dear...$75 are GBP 125? Phhh...where are we now...
- Original Message -
From: Dave Park
Sent: Tuesday, October 07, 2014 7:13 PM
Subject: Re: [Ql-Users] QLis30 pledge...
Thanks Mark! I sent £75 (which turned out to be $125)... The funds
reported
they will be available
As you said, having an STE, there only was the way of using the QVME Card.
What have you used up until now? The monochrome software-only version or do
you have an QVME?
Cheers...Ralf
- Original Message -
From: Michael Grunditz
Derek,
Thats what I do now with a ancient SMSQ/E. But
Is there no recent SMSQ/E for Q40? And why do you need an STE? I have
assumed you have one...
Cheers...Ralf
From: Michael Grunditz
Ok
I can see now that I need a MegaSTE or a TT for VME cards.
This makes me miss my working Q40 ..
On 12 August 2014 18:02, Ralf Reköndt wrote:
Yes, it does
Ok, so get Breakfast...;-)
- Original Message -
From: Tobias Fröschle
Italian and Chinese can be had just about everywhere in the world - British
food (maybe for one or the other good reason ;) ) only in the UK.
As a foreign visitor, I’d vote for the local food.
Hi Rich,
I think, I miss my password and username for the Wiki but got no success in
sending it to me.
Cheers...Ralf
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Ok, Floppy image...how?
Folder icon in QPC? Have I missed something? Still using QPC 3.34.
- Original Message -
From: Wolfgang Lenerz
Hi,
How did you do THAT???
just select a floppy file image as flp1_ (use the folder icon next to
the flp field)
Wolfgang
How did you do THAT???
Cheers...Ralf
- Original Message -
From: Wolfgang Lenerz
When I set an *image file as flp* under QPC, it works there.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
I once had a kind of Mini-PC case, where I fitted a powersupply, an issue 5
board and a kind of backplane (with 6 plugs), unpowered with a separate left
whole in the case to plug a QEP III into it (connected with a separate
cable). The backplane was fitted with an SQB 513k plus an QFlash 64k
So we should start a Crowdfunding so someone (TT or MK) can write the
suitable things...?
Cheers...Ralf
- Original Message -
From: Peter Graf
On 21 Mar 2014 at 15:30, John Alexander wrote:
This is certainly a good way to go
Not so certain. I think I spent 7 years or so
I just read in QL-World 08/88 a review from Simon Goodwin about a Microfair,
where he have seen a prototype of Sandy's Megaboard. So I think, it has
materialized in some way.
Does anybody (Dave?) know, what happened with the board or with this anyway?
Cheers...Ralf
What may be of interest to me: Can someone explain, how the original Medic
software was? Say, what kind of Toolkit, devicename and so on? Maybe Urs, as
I am sure he own one.
Cheers...Ralf
- Original Message -
From: Rich Mellor (RWAP)
I don't have Tony Tebby's email address - could
I think, I have a Spy, Master or not, I will look.
Cheers...Ralf
- Original Message -
From: Rich Mellor (RWAP)
Richard Howe has provided a license to add the former ARK software titles
to the
QL Homepage -
Does anyone have a copy of these please:
Spy v3
MasterSpy v3.3
Mailfile
I have a disk labelled JVC Scanner v2.0. I will look what I can do...
Cheers...Ralf
- Original Message -
From: Rich Mellor
Does anyone have the software for the Jurgen Falkenberg QL Scanner ?
A user has contacted me who has the hardware, but his floppy disk is
corrupt!
--
Rich
OK, files sent to you.
- Original Message -
From: Ralf Reköndt
I have a disk labelled JVC Scanner v2.0. I will look what I can do...
Cheers...Ralf
- Original Message -
From: Rich Mellor
Does anyone have the software for the Jurgen Falkenberg QL Scanner ?
A user has
What kind of OS is there? Would be nice to have it running with Minni. Any
chance to run it under Windows XP?
Cheers...Ralf
- Original Message -
From: Marcel Kilgus
Due to popular (= one) demand, the full version of QPC1 has now been
released, too. It's available from my web site
As Home Finance is written in MC, I do not really understand, why the author
do not change it, so it may be run with more memory. Or simply make the
source code available. The program is very good (I have used it in early
times a lot) but has a few things like lower case printing.
Well, I think, the most problem is that, the Level 2 subdirectory names are
part of the filename. It would be interesting to know, how this was done
with the first hardisk systems (like Quest or similar). I think, a device
can use its own way to manage this, as long as the OS can know, where to
Hmm, I think I have sent this to you. You will find this in RAMTOOL_ASM,
starting at the Label chgdev (as far as I remember).
The whole thing was an idea of mine, Martin just ;-)) realised it. I just
wanted to put all my QL-Games in separate TK2 subdirectories on my FLP, e.g.
Cavern
...
Just SBasic. The TK3 extension was.
Cheers...Ralf
- Original Message -
From: Tobias Fröschle
Ralf,
your description is pretty close to the „dev“ device, but I’m still missing
long filename support?
Tobias
Am 11.02.2014 um 18:04 schrieb Ralf Reköndt ralf.rekoe...@t-online.de:
Hmm
Hmm, I just remind SQBs with a 7805 voltage regulator. Even my latest Mouse
version had it.
Cheers...Ralf
- Original Message -
From: Dave Park
That was why we changed the design to have a
switching power supply.
___
QL-Users Mailing
Ah I remeber. Mine had an orange one. Which means what???
Cheers...Ralf
- Original Message -
From: Stephen Usher
On 31/01/14 14:11, Dave Park wrote:
All versions used the Sinclair-style case (we thought they looked neat,
and
Sinclair was almost giving them away).
Does it have a
As I said. These were the best venues (for me).
Cheers...Ralf
- Original Message -
From: François Van Emelen
QL2004... Those were the days. There were many visitors and well attended
workshops.
I think more people would attend QLis30 if organised in Eindhoven,
Regards,
François Van
Hmm, I have an old beta version (got from TT) and this worked without
problems. But with no GD2.
Cheers...Ralf
- Original Message -
From: Michael Grunditz michael.grund...@gmail.com
To: ql-us...@q-v-d.com
Sent: Wednesday, January 08, 2014 6:59 PM
Subject: Re: [Ql-Users] SMSQ on the
Unfortunately no sources, only binary.
- Original Message -
From: Wolfgang Lenerz
Sent: Thursday, January 09, 2014 12:15 AM
Subject: Re: [Ql-Users] SMSQ on the Atari
Hi Ralf, Michael,
Hmm, I have an old beta version (got from TT) and this worked without
problems. But with no GD2.
Oh, 1998, my respect!
Cheers...Ralf
- Original Message -
From: pjwitte pjwi...@online.no
To: ql-us...@q-v-d.com
Sent: Tuesday, January 07, 2014 7:06 PM
Subject: Re: [Ql-Users] How to label a (fresh) (QXL.)WIN
On 07/01/2014 16:46, Urs Koenig (QL) wrote:
Thanks for the fast response
OK, I would prefer Eindhoven.
- Original Message -
From: Dave Park d...@sinclairql.com
To: ql-us...@q-v-d.com
Sent: Sunday, January 05, 2014 7:39 PM
Subject: [Ql-Users] QLis30 pledge...
I offer to sponsor £150 towards the cost of any organized 'QL is 30'
show. If others would like to
OK, I take one.
- Original Message -
From: Dave Park d...@sinclairql.com
To: ql-us...@q-v-d.com
Sent: Wednesday, November 27, 2013 7:08 PM
Subject: Re: [Ql-Users] Reverse Engineering a QDisk floppy disk interface
A small run of Sandy SuperQBoards (Issue 4) will be made available in
No Problem. I'll take a 512k one.
- Original Message -
From: Dave Park d...@sinclairql.com
To: ql-us...@q-v-d.com
Sent: Wednesday, November 27, 2013 8:46 PM
Subject: Re: [Ql-Users] Reverse Engineering a QDisk floppy disk interface
Be patient :) I am just gradually gathering the
I would prefer Eindhoven. Ok, there were the best venues of my my QL-Life,
my fault ;-). But I think, it would be best for all (except Sjef...;-)) to
have a place to travel.
Cheers---Ralf
- Original Message -
From: jms1
SQLUG could probably find a location and maybe pay for the
OK, I think, Eindhoven is good for that.
- Original Message -
From: Geoff Wicks
Sent: Wednesday, November 06, 2013 7:43 PM
Subject: Re: [Ql-Users] Ql is 30
On 06/11/2013 14:22, Wolfgang Lenerz wrote:
Hi,
Just out of idle curiosity, does anybody have a reasonable guestimate
at how
As I said.
- Original Message -
From: G WICKS
Having said that the Netherlands would be a good location because it is
accessible from many other countries.
I think there is far more chance of an event on the continent than in the
UK. Quanta has no desire to run a QLis30 event and
Hmm, I have ever used the GST Macro Assembler even with PE and have never
found a bug. What was the need to enhance/correct it?
And ... had Phil the sources?
Cheers...Ralf
- Original Message -
From: Derek Stewart
I have both GST and Quanta, I would prefer the Quanta Assembler, as
- Original Message -
From: Norman Dunbar
I remember a program I wrote for Dilwyn some years ago (I can't remember
the name of it though!) which opened a full-screen window for some
reason, which effectively disabled using the pointer to pick the other
running programs.
Same with
From: Wolfgang Lenerz
I don(t know hox Structuerd Superbasic does it, the Baic linker does the
following:
It collates and numbers the source files, saving them as a normal basic
file.
then it calls a parser to parse that file and generate a _sav file.
This reminds me of the SMS2 parser
From: Wolfgang Lenerz
From Ralf Reköndt
This reminds me of the SMS2 parser program, which was a standalone
program from TT in early times (still working). Is this the same?
Maybe.
I can't remember.
It's quite probable, though.
I think, Jochen can bring up a bit light here...(if he
Well, I once built a QL board in a case with a simple expansion PCB for
connecting an SQB, a QFlash EPROM board and a QEP III programmer outside to
a separate connector. No separate power supply and no capacitors and all
worked well the whole time. I am a bit unsure why it should take such
Hi Dilwyn,
a little correction for your site:
The font used by Sinclair for their adverts was not
Saxony-Serial-Regular is a font which was used in QL advertising and
documentation
In fact, the font used was Syntax, a Linotype font. The
Saxony-Serial-Regular seems to be a derivat with
...@lists.q-v-d.com] On Behalf Of Ralf Reköndt
Sent: 03 March 2013 10:37
To: ql-us...@q-v-d.com
Subject: [Ql-Users] Fonts
Hi Dilwyn,
a little correction for your site:
The font used by Sinclair for their adverts was not
Saxony-Serial-Regular is a font which was used in QL advertising
From: Wolfgang Lenerz
Thanks, but I'm not sure I understand - the loader program works from a
ram disk? It doesn't here.
I hope, Marcel and you are using the same version...;-)
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
From: Geoff Wicks
LineDesign gives a QLib error message:
Can't find PWS library in ProWesS
--
As far as I know...LineDesign is written in C. the program you've mentioned
must be an other program ;-)
Cheers...Ralf
From: SMSQE
Not as quick as QPC2, but very acceptable speed and (better than QPC2) it
handles the keyboard without a problemmeaning I have access to # and
other characters I can't easily get under QPC2!
I never had (and have) problems with the keyboard with QPC2...???
Cheers...Ralf
Seems, that QemuLator suffers from a Sandy virus.;-)
Cheers...Ralf
- Original Message -
From: Dilwyn Jones dil...@evans1511.fsnet.co.uk
To: QL Users List ql-us...@q-v-d.com
Sent: Friday, September 28, 2012 6:43 PM
Subject: [Ql-Users] qxl.win on Q-emuLator
Does anyone know if
-Users] qxl.win on Q-emuLator
What is a Sandy virus?
Dilwyn
-Original Message-
From: Ralf Reköndt
Sent: Friday, September 28, 2012 5:57 PM
To: ql-us...@q-v-d.com
Subject: Re: [Ql-Users] qxl.win on Q-emuLator
Seems, that QemuLator suffers from a Sandy virus.;-)
Cheers...Ralf
From: Dilwyn Jones
2. Spectrum microdrives would not format cartridges on a QL, though you
could usually read and write OK. I think there was a bit of a speed
difference IIRC, that Sinclair made changes to make QL drives work at
higher capacity.
I have discovered this, when I have built my
From: Tony Firshman
Ralf Reköndt wrote, on 23/Aug/12 18:18 | Aug23:
BTW: If you put a germanium diode in the MDV select pin, you can access
both mdv1_ and mdv2_ with one drive Was very good in a small dektop
case.
Fun if you try to copy form mdv1_ to mdv2_ (8-)#
Tony
--
Hehe
From: Dilwyn Jones
Standard: PCL5e, Epson GL/2
Option: EpsonScript Level 2 (Postscript® Level 2 Compatible)*1, IBM mode,
ESC/P2, FX*2One of *1, *2 can be supported
Ok, it seems to be a bit different to my old EPL 5200. This supports the
above modes plus Epson LQ and ESC/P2.
Here today.
- Original Message -
From: thorsten herbert
Not here in Germany...8-(.
I'm in Germany (northern part of Bavaria) too and got it already ...
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Not here in Germany...8-(.
- Original Message -
From: peet vanpeebles
Mine arrived today, I liked the little joke on the front cover! :)
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Seems to be on Marcel's site...?
- Original Message -
From: Dilwyn Jones dil...@evans1511.fsnet.co.uk
To: QL Users List ql-us...@q-v-d.com
Sent: Friday, June 08, 2012 3:16 PM
Subject: [Ql-Users] Easyptr manual
Before I reinvent the wheel and OCR my Easyptr manual to use on my eBook
RETurn ferr
12560 END DEFine file_test
I set the data_default to , so I really know, if the file exists or not.
Cheers...Ralf
- Original Message -
From: Ralf Reköndt ralf.rekoe...@t-online.de
To: ql-us...@q-v-d.com
Sent: Saturday, April 21, 2012 6:50 PM
Subject: Re: [Ql-Users] Quanta
I think, that wasn't the question. Don't confuse this with QLiberator's
option Line Numbers.
As far as I know, QLiberator does not need line numbers, but this is not
possible via the interpreter. It is in fact possible with the QD5 Thing to
compile source code without line numbers.
I think,
Yes, but always from a loaded SuperBASIC program... ;-)
Turbo compiles from the tokenised SuperBASIC program.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Hmm, but the TK2 Manual states about OPEN_DIR, so, apart from Level 2, it
should be possible. But what kind of directory, if not Level 2? Perhaps just
the root one.
Section 10 Open and Close
The standard QL channel OPEN commands are redefined by Toolkit II
to use the data directory. In
Yes.
From: Tony firshman
(Fom TK2 manual...)
CLOSE #channelsclose channels
What is the syntax?
close #2,#3 ?
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Library Guide
Op Sat, 21 Apr 2012 16:10:15 +0200 schreef Ralf Reköndt
ralf.rekoe...@t-online.de:
Hmm, but the TK2 Manual states about OPEN_DIR, so, apart from Level 2, it
should be possible. But what kind of directory, if not Level 2? Perhaps
just the root one.
Section 10 Open and Close
Ah, thank you. I wasn't aware (after such a long time doing it) that the
FORMAT just creates the QXL.WIN ;-)
Cheers...Ralf
- Original Message -
From: Wolfgang Lenerz w...@scp-paulet-lenerz.com
To: ql-us...@q-v-d.com
Sent: Thursday, April 19, 2012 8:43 AM
Subject: Re: [Ql-Users] SMSQE
BTW: How do I create a fresh QXL.WIN...?
- Original Message -
From: Wolfgang Lenerz
create a fresh qxl.win file and unzip the sources onto it and be able to
make that dev8_.
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Yes, even the QRAM Manual states mdv2_. (never tried)
- Original Message -
From: Tobias Fröschle
Ralf, Rich,
the manual says different (From the Trump card manual):
FORMAT ram1_mdv2 loads an image of mdv2 into RAM Disk 1
The RAM Disk can even load a Microdrive with a
As far as I know.It only works with mdv1_.
- Original Message -
From: Rich Mellor r...@rwapservices.co.uk
To: ql-us...@q-v-d.com
Sent: Sunday, April 15, 2012 6:09 PM
Subject: [Ql-Users] FORMAT ram1_mdv2 Oddities
I have an issue 6 QL (JS ROM), and have plugged a Super Gold Card
BTW: Does anybody knows, if this Tyche-ROM is a complete new QDOS? And
what are the differences? Faster? Better...? Things that do not run?
Chreers...Ralf
- Original Message -
From: Rich Mellor
It works on MG ROM, and even Tyche ROM and a TB ROM (not sure what that
one is).
Ah, thank you. I had a quick look through the code. There seems to be a
backup routine and a few unknown keywords like TODIR, UPDIR, seems a bit
like DNEXT of TK2.
Would be interesting to know, if there is code for hard directories.
Cheers...Ralf
- Original Message -
From: Rich
The original QLOAD extension from Liberation Software gave strings like
x Extension missing, if used extensions were not loaded before loading
a QSAVEd program.
The rewritten version of QLOAD in SMSQ/E does not do this. Does anbody know,
why Tony has ommitted this?
Cheers...Ralf
No, he does not mean a printer code, he is reading a native .doc from
PC-Quill.
From: Bryan Horstmann
Sent: Thursday, March 29, 2012 4:42 PM
Subject: Re: [Ql-Users] Anyone know what this is for
On 29/03/2012 02:02, Norman Dunbar wrote:
I'm slightly amending QStripper to read Quill
. Wonder why...?
Thanks to all.
Cheers...Ralf
From Rich Mellor
On 15/03/2012 19:04, Dilwyn Jones wrote:
Ralf Reköndt wrote:
as it is not possible to format a QL DD or HD disk under QPC2/Windows
XP:
Does anyone know a QL program, which writes a suitable map on a PC
formatted disk, so
Ok, in fact it was flp1_name*H
;-)
- Original Message -
From: Rich Mellor r...@rwapservices.co.uk
To: ql-us...@q-v-d.com
Sent: Saturday, March 17, 2012 1:40 PM
Subject: Re: [Ql-Users] Disk format QPC2
On 17/03/2012 11:59, Ralf Reköndt wrote:
Hi all,
At least, I had a successful HD
...@rwapservices.co.uk
To: ql-us...@q-v-d.com
Sent: Saturday, March 17, 2012 1:40 PM
Subject: Re: [Ql-Users] Disk format QPC2
On 17/03/2012 11:59, Ralf Reköndt wrote:
Hi all,
At least, I had a successful HD Format.
I used Format a: /FS:FAT under XP DOSbox, then FORMAT flp1_name*D
under QPC2 as suggested
From: Bob Spelten
---
As far as I know SMSQ/E 2.91 was the last version to reliably access DD
floppies.
In later versions writing to the disk froze SMSQ/E on my Aurora, so does
format.
I prefer to rely on good old QDOS to read old DD's.
---
Oh, it works for me but not tried often yet to write to
Evening,
as it is not possible to format a QL DD or HD disk under QPC2/Windows XP:
Does anyone know a QL program, which writes a suitable map on a PC formatted
disk, so that it is usable as a QL disk?
Cheers...Ralf
___
QL-Users Mailing List
Hmm, a bit confusable, I think. I have the complete SB source of DP
Professional Publisher here and this is a bit more than 120k. And this
program was successfully compiled with Turbo. Guess how this was done...?
Cheers...Ralf
- Original Message -
From: Michael Bulford
Does anybody know a recent email address from Freddy Vaccha?
Cheers...Ralf
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Good day,
does anyone know, how the early WIN devices (Quest, CST, Medic) handles the
subdirectories (if any) on the QL? Would be interesting for me to know, if
there were real hard (say...DOS kind) or soft (say...TT kind...just like
now) kind of directories.
Also:
Jürgen Falkenberg states
Hmm, the same as with the Schön standard keyboard? Christopher Smith also
sold an anti-bounce 8049, which had the same problems
Cheers...Ralf
From: Tony Firshman
The *only* good things about it were the the look and feel.
It suffered from keybounce. They produced a replacement chip for
From: Dave Park
The only aspect of the QXT-640 I dealt with was that all the cards had
the 7805 regulators removed and links inserted as the boards were
given a clean 5v supply. It was a trap and bane of my existence that I
had to carefully check any card I worked on to see if it had been
From: Peter Graf
---
Ralf Reköndt wrote:
As I have written a few times: Using PE from SBasic is too
complicated for a lot of people (including me). QPTR is too
complicated (I have used it!). And I fear, Turbo_PTR is a similar
thing, ok, never tried.
Have you seen the QLPUI demo?
http
From: Marcos Cruz
- Beside my personal use, I see no motivation for writing software for a
- commercial system (SMSQ/E) that people actually and practically cannot
use.
- There are too many free alternatives out there...
I think, the problem is, that a few very good programmers have given us
From: Tony Firshman
On Dec 6, at 15:57 | Dec6, Bryan Horstmann wrote:
On 20/11/2011 10:17, Dilwyn Jones wrote:
QaLendar 2012
My annual offering of the QaLendar (QL themed calendar) is now available
to download free from my website. Filled with QL themed pictures, it is
available in two
It seems, a way like in SMS2 would do it. SMS2 for Atari ST machines just
had a CLI to make such things like EXEC, DIR, FORMAT.
But SMS2 let you EX Qlib and other jobs. SuperBasic programming was just
possible via QD and a QD plug-in for compiling and QLib. So there was a kind
of Basic table
From: Rich Mellor
Does anyone have a QIMI manual that they can scan in - from memory it
was only a couple of pages.
It is missing from Dilwyn's site!
I have one (as far as I know) I will send it to Dilwyn (give me a bit...)
Cheers...Ralf
___
From Geoff Wicks
Quanta is being very shy at the moment. If you are curious go to the
penultimate item of the Just Words! news page.
www.gwicks.net/justwords.htm
Remember where you heard it first!
You shouldn't open PDF files in your own frame. Let them open in a new,
separate browser
Urs Koenig (QL) wrote:
Today the Marvel Studio movie THOR premieres in theatres around Europe.
While this motion picture is from the studio that brought you Iron Man,
the Iron Man himself brings you an exclusive unseen scene. Enjoy!
http://www.youtube.com/watch?v=Qo62g-ZAbxw
;-)
Cheers, Urs
From: Marcel Kilgus
Miguel Angel Rodriguez Jodar wrote:
Until now, I present to you a demo of the read speed achieved with a
white-brand
SD card, and a 640KB (should work on an unexpanded too) QL with Minerva
1.98 .
http://www.youtube.com/watch?v=78xtsEKW4Lw
That is frigging cool,
Bob Spelten wrote:
To Sleep I use the following line:
ERT HOT_THING('$','Button_Sleep')
Well, I think, he just meant (as I do) a few simple SB commands, to do
several things in a program. The above is afaik just a kind of top set
command, not a real PTR command. Ir works, but I think,
Bob Spelten wrote:
He indicated using Qpac2, this is a simple way to use its Button Frame on
any job window.
I think, he means easy creation of pull downs etc.
That would mean using Qptr, EasyPtr or TurboPtr.
But the question was:
...a 'simple' way to make an SBasic job work with the PE -
Urs Koenig (QL) wrote:
Amstrad and Sinclair computers got married! :-(
Exclusive resurrected video:
http://www.youtube.com/watch?v=sxw-fV4gG3M
Not available in my country because of music content 8-(
___
QL-Users Mailing List
Dilwyn Jones wrote:
3rd picture seems to be an interface for the EPROM slot, but no idea
what it is.
AFAIK it is the ABC keyboard I/F. See the DIN-socket at the left. Worked
good but suffered from bad connection.
Pic 11 ist the Schoen keyboard I/F (I had one), as is Pic 22.
Picture 22 is
Urs Koenig (QL) wrote:
Ralf Rekoendt wrote:
And I still have an old advert letter from Commander.;-)
Oh dear. Those were crazy days!
What was it all about? Patching and repacking a pirated copy of a dead-end
product? Like pirating an already pirated copy or so? At least some QLers
Rich Mellor wrote:
Simple: It was Martin Berndt's Turbo-Xchange, patched with a special
screen accelerator for use on a QL and freed fom Thor's watermark
check. One of the best things he ever does (beside MG-ROM and
freeing PCB 1 and Tankbusters).
He freed PCB 1?
Does anyone have a copy of
Tony Firshman wrote:
Ralf Reköndt wrote, on 10/Mar/11 18:37 | Mar10:
Does anyone have a manual for a Medic I/F to scan in and send to Dilwyn?
An EPROM dump for examining would also a be good idea...;-)
Medic circuit diagram (in two scanned A4 parts which need stitching!):
http
Adrian Ives wrote:
Try these:
http://img135.imageshack.us/i/medicinterfacecircuitdi.png/
http://img153.imageshack.us/i/medicinterfacecircuitdi.png/
-Original Message-
From: ql-users-boun...@lists.q-v-d.com
[mailto:ql-users-boun...@lists.q-v-d.com] On Behalf Of Ralf Reköndt
Sent: 13
I see, that the Medic I/F supports four drives (four drive select lines).
Does anybody know a bit more about the software?
Cheers...Ralf
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Rich Mellor wrote:
Here's an interesting little challenge - according to The Designer
program from Pyramide, there is a bug in the French MG ROM which it
patches -
see http://www.qlforum.co.uk/viewtopic.php?f=2t=116
Anyone have any suggestions as to what this patch does?
I just know abozt
Any idea about the dead http://www.bergbland.info/ ?
Cheers...Ralf
___
QL-Users Mailing List
http://www.q-v-d.demon.co.uk/smsqe.htm
Tobias Fröschle wrote:
Am Samstag, den 12.03.2011, 13:04 +0100 schrieb Ralf Reköndt:
Any idea about the dead http://www.bergbland.info/ ?
Cheers...Ralf
Well,it works for me?
Tobias
Not here.
___
QL-Users Mailing List
http://www.q-v
101 - 200 of 451 matches
Mail list logo
