On 31 Dec 2003, at 12:32, David Hoffman wrote:
Since upgrading my G4 to system 10.3.2 (from 10.2.8) I can no longerHave you tried running it alone into the scsi card. My Microtek 4000t only likes operating this way and has done for 4 years and still does now I'm running the same OS version as you.
connect to my scsi Microtek Artixscan 1100 scanner with Vuescan 7.6.72 or
any other software. I have an Adaptec scsi card 2906 & Adaptec advised
removing the Adaptec78XXSCSI.KEXT but this hasn't helped.
The device is on the same chain as a backup tape which was working after
the upgrade yesterday (although the Retrospect schedule no longer worked)
but is not running now and if I run ioreg in terminal both scsi devices
are seen.
HTH Patrick.
http://www.patrickbaldwin.com
020 8891 2516
07802 408 638
A member of The Association of Photographers
=============================================================== GO TO http://www.prodig.org for ~ GUIDELINES ~ un/SUBSCRIBING ~ ITEMS for SALE
