I also have this problem - on multiple machines (IBM and HP) with
different video cards and drivers.

I run Win2k with an S3 video card (32M) on the IBM; Win2k with an Elsa
Gloria II video card (64M) on the HP

John Haddy

> -----Original Message-----
> From: Brad Velander [mailto:[EMAIL PROTECTED]]
> Sent: Friday, 14 September 2001 2:37 AM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Mechanikal Layers are disappearing
>
>
> Joop,
>       as I have stated, I experience the same problem as Waldemar. In my
> case this issue has been consistent across two machines I've had
> and several
> other company machines. The machines are usually similar but have had
> several different video cards/drivers.
>       In both of my machines the video cards were 32MB cards, the present
> card is (as far as I can determine without opening the box):
> An Asus Nvidia (NV5) clone with 32MB RAM. I run it at 1280 x
> 1024, 72 Hertz,
> True color and small fonts.
>       I am running NT4 with P99SE SP6 and that would be the common OS
> across all the systems we have run until just very recently. We
> are changing
> to W2K and I should have a W2K machine within the week. At least
> one system
> which is already W2K is acting in exactly the same manner, as I might have
> expected from our experiences thus far.
>
> Brad Velander,
> Lead PCB Designer,
> Norsat International Inc.,
> #300 - 4401 Still Creek Dr.,
> Burnaby, B.C., V5C 6G9.
> Tel. (604) 292-9089 direct
> Fax (604) 292-9010
> website www.norsat.com
>
>
> > -----Original Message-----
> > From: Joop Reekers [mailto:[EMAIL PROTECTED]]
> > Sent: Thursday, September 13, 2001 8:57 AM
> > To: Protel EDA Forum
> > Subject: Re: [PEDA] Mechanikal Layers are disappearing
> >
> > I often use Mech Layers 5-16 and I do NOT see the described effect.
> > I'm using P99SE+SP6, WIN2K on AMD K6-2-350 with only 128MB RAM and an
> > Intel740 PCI video card.
> > Could it be caused by (lack of) memory or by your video card
> > or its driver,
> > or may be by the color settings (I use High Color (16 bit))?
> >
> > Have a nice day!
> >
> > Joop Reekers
> > Semecs bv, Almelo NL
>

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to