Re: [WISPA] Insurance / Service Plan Offerings
i like that idea. have the contract read that replacement of the equipment for whatever reason incurs a minimum trip charge of $75 or buy insurance @ $4 a month. Peter R. wrote: The DISH network actually charges for replacement. I had a DVR go bad and it cost me $50 for replacement. Ain't much, but it ain't free. What about charging a maintenance fee? It could be a surcharge to your service like the RBOCs add DSL fees and inside wire maintenance. Has anyone looked into getting asset insurance? Thank you. Regards, Peter RAD-INFO, Inc. - NSP Strategist We Help ISPs Connect & Communicate 813.963.5884 http://4isps.com ISP Expo in Tampa, Dec. 9 & 10 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 900Mhz Grid vs Yagi
http://www.pacwireless.com/products/GD9-15_datasheet.pdf I paid about $75 through CTI... -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brian Rohrbacher Sent: Monday, November 14, 2005 11:58 PM To: WISPA General List Subject: Re: [WISPA] 900Mhz Grid vs Yagi Whats the cost comparison on these three? Travis Johnson wrote: > Hi, > > I just looked on Pac Wireless' website, as well as Wisp-router and I > don't see the 900mhz grid. Do you have a part number or direct link? > > Travis > Microserv > > Rick Smith wrote: > >> Tom, >> >> Check out the newer 15 dbi grid from Pac - it's the same grid as the >> 2.4 parabolic, but with a 900 mhz horn. >> >> It ROCKS in comparison to many other antennas, and I've used 'em all. >> >> I'm usin this particular one with Canopy - 12 miles out and -74 >> through thick trees on the CPE end. 7 jitter! >> >> R >> >> >> -Original Message- >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >> On Behalf Of Tom DeReggi >> Sent: Monday, November 14, 2005 8:09 PM >> To: WISPA General List >> Subject: [WISPA] 900Mhz Grid vs Yagi >> >> >> PacWireless makes a 900Mhz 18 dbi Parabolic grid antenna. >> M2 makes a 900Mhz 17.5 dbi Yagi antenna. >> >> We had found that 900 was very particular to placement, even a few >> inches in one direction or the other can make big differences in link >> quality. Has anyone used both antenna types for a specific link, to >> compare the properties of each of the designs. The thought is whether >> the wider surface area of the parabolic antenna would make it better >> to survive signal obstruction from swaying trees in forests. The >> prabolic is a monster at 3 ft dia, s othe Yagi would clearly be a >> better choice for a roof top chimney install based on cosmetics. But >> wondering from a performance perspective the comparison. >> >> Tom DeReggi >> RapidDSL & Wireless, Inc >> IntAirNet- Fixed Wireless Broadband >> >> -- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Insurance / Service Plan Offerings
Title: Insurance / Service Plan Offerings Hrmm, what about getting subs to pay for the installation cost for the replacement trip ? Bill 'em $75 or so for the service call to replace it - that'd go somewhere toward paying some of the CPE off. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of CliffSent: Tuesday, November 15, 2005 12:29 AMTo: WISPA General ListSubject: RE: [WISPA] Insurance / Service Plan Offerings We also retain ownership to the CPE and replace at our cost when not due to customer misuse or abuse (which has happened and I charged for the replacement). Also, all of my service contracts AUTO-RENEW. Therefore, if I do not receive a cancel request in writing within 30 days of contract fulfillment, it will auto-renew under the same terms and conditions as the original. This has worked to our advantage a few times. It is totally up to you to enforce, negotiate a settlement or just relieve sub from fulfillment. The auto-fulfillment is another reason I don’t mind replacing the CPE when needed. - Cliff From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis JohnsonSent: Monday, November 14, 2005 9:47 PMTo: WISPA General ListSubject: Re: [WISPA] Insurance / Service Plan Offerings Hi,We retain ownership of the CPE, so when it goes bad, we replace it free of charge. If they are out of contract, we have them sign a new 12 month contract and they get it for free.TravisMicroservJohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
The DISH network actually charges for replacement. I had a DVR go bad and it cost me $50 for replacement. Ain't much, but it ain't free. What about charging a maintenance fee? It could be a surcharge to your service like the RBOCs add DSL fees and inside wire maintenance. Has anyone looked into getting asset insurance? Thank you. Regards, Peter RAD-INFO, Inc. - NSP Strategist We Help ISPs Connect & Communicate 813.963.5884 http://4isps.com ISP Expo in Tampa, Dec. 9 & 10 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Insurance / Service Plan Offerings
Title: Insurance / Service Plan Offerings We also retain ownership to the CPE and replace at our cost when not due to customer misuse or abuse (which has happened and I charged for the replacement). Also, all of my service contracts AUTO-RENEW. Therefore, if I do not receive a cancel request in writing within 30 days of contract fulfillment, it will auto-renew under the same terms and conditions as the original. This has worked to our advantage a few times. It is totally up to you to enforce, negotiate a settlement or just relieve sub from fulfillment. The auto-fulfillment is another reason I don’t mind replacing the CPE when needed. - Cliff From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson Sent: Monday, November 14, 2005 9:47 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings Hi, We retain ownership of the CPE, so when it goes bad, we replace it free of charge. If they are out of contract, we have them sign a new 12 month contract and they get it for free. Travis Microserv JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900Mhz Grid vs Yagi
Whats the cost comparison on these three? Travis Johnson wrote: Hi, I just looked on Pac Wireless' website, as well as Wisp-router and I don't see the 900mhz grid. Do you have a part number or direct link? Travis Microserv Rick Smith wrote: Tom, Check out the newer 15 dbi grid from Pac - it's the same grid as the 2.4 parabolic, but with a 900 mhz horn. It ROCKS in comparison to many other antennas, and I've used 'em all. I'm usin this particular one with Canopy - 12 miles out and -74 through thick trees on the CPE end. 7 jitter! R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 14, 2005 8:09 PM To: WISPA General List Subject: [WISPA] 900Mhz Grid vs Yagi PacWireless makes a 900Mhz 18 dbi Parabolic grid antenna. M2 makes a 900Mhz 17.5 dbi Yagi antenna. We had found that 900 was very particular to placement, even a few inches in one direction or the other can make big differences in link quality. Has anyone used both antenna types for a specific link, to compare the properties of each of the designs. The thought is whether the wider surface area of the parabolic antenna would make it better to survive signal obstruction from swaying trees in forests. The prabolic is a monster at 3 ft dia, s othe Yagi would clearly be a better choice for a roof top chimney install based on cosmetics. But wondering from a performance perspective the comparison. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
So your subs own the CPE? Brian JohnnyO wrote: That is what the insurance plan would prevent - They will have a choice to "opt out" - but if they do - they will be responsible for the "cost" of a new CPE. If it were only 1 CPE a month - I wouldn't sweat it - but 6 months out of the year - it's almost 8 per month ! I was thinking charging $3.95/mo - if I could get half of my Customer base to pay it - that would be almost $500.00/mo in revenue generated to help offset the expense. Would prevent us from having to go through a rate increase which would be much harder to swallow for a customer I think. Cellular companies / Satellite companies / pager companies - they all have service plans to offset the costs of replacing equipment for a customer - was thinking - why not a WISP ? JohnnyO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Blair Davis Sent: Monday, November 14, 2005 10:12 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings What George wrote. It can be annoying to replace equipment, but, the hassle of trying to talk the customer into replacing it is just not worth it. With 200 subs, I am replacing an average of 1 radio a month. Not too bad at all -- Blair Davis West Michigan Wireless ISP 269-686-8648 George wrote: JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
I feel for ya JohhnyO, seriously. I've changed out every Smart bridge I ever installed except two and dittto for tranzeos. The EZ Bridges were great for a while, but going past 2 years now with them and we're starting to replace them as well. I'm not sure how many rados I've replaced this year, but it seems lately it's more and more. At almost 700 subs, the replacement rate grows, but then again the revenue does as well. I bet I have a couple hundred dead or upgraded cpes in my collection. George JohnnyO wrote: George - that may work in your neck of the woods and I have been doing the same since day 1. This past year - we replaced over $8,000 worth of CPEs - that is almost a full months revenue for us Mind you - we dealt with hurricanes and severe lightning - but - - - we can no longer as a company sustain those types of hits That is 8k in equipment costs - not the additional 5k worth of labor for the trips to the CPE. I am In an area that will constantly have severe lightning issues, hurricanes, wicked thunderstorms and high winds. How many CPEs did you replace in the last 12 months ? I have tracked and count 43 here. JohnnyO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Sent: Monday, November 14, 2005 11:03 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Insurance / Service Plan Offerings
That is what the insurance plan would prevent - They will have a choice to "opt out" - but if they do - they will be responsible for the "cost" of a new CPE. If it were only 1 CPE a month - I wouldn't sweat it - but 6 months out of the year - it's almost 8 per month ! I was thinking charging $3.95/mo - if I could get half of my Customer base to pay it - that would be almost $500.00/mo in revenue generated to help offset the expense. Would prevent us from having to go through a rate increase which would be much harder to swallow for a customer I think. Cellular companies / Satellite companies / pager companies - they all have service plans to offset the costs of replacing equipment for a customer - was thinking - why not a WISP ? JohnnyO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: Monday, November 14, 2005 10:12 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings What George wrote. It can be annoying to replace equipment, but, the hassle of trying to talk the customer into replacing it is just not worth it. With 200 subs, I am replacing an average of 1 radio a month. Not too bad at all -- Blair Davis West Michigan Wireless ISP 269-686-8648 George wrote: > JohnnyO wrote: > >> We're coming into our 3rd year of operation soon. I am curious how >> others are doing combat against the replacement / repair / service >> call costs associated with having to replace CPE end equipment. >> >> I was thinking about offering a service plan like DirecTV / Cellular >> Companies etc, but not sure how to introduce or impiliment this. >> >> Help and suggestions would be appreciated. >> >> Regards, >> >> JohnnyO >> > > I am eating it. > I bet if I told every customer who's radio died that they had to pay > for a new one, we'd have less subs. > > I own all the radios and accept the responsibility. > > another way I look at it, it's cheaper to give an existing sub a > 100.00 radio and get 500 for the next 12 months than it is to go > without revenue and have to pay for advertising to get new subs to > replace the one that I just lost. > > But, it's the way I do this in this market. > > George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
What George wrote. It can be annoying to replace equipment, but, the hassle of trying to talk the customer into replacing it is just not worth it. With 200 subs, I am replacing an average of 1 radio a month. Not too bad at all -- Blair Davis West Michigan Wireless ISP 269-686-8648 George wrote: JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
I'm curious about this too.. Are you using off-the-shelf stuff? Can you sell an insurance policy to customers to offset the replacement costs? JohnnyO wrote: George - that may work in your neck of the woods and I have been doing the same since day 1. This past year - we replaced over $8,000 worth of CPEs - that is almost a full months revenue for us Mind you - we dealt with hurricanes and severe lightning - but - - - we can no longer as a company sustain those types of hits That is 8k in equipment costs - not the additional 5k worth of labor for the trips to the CPE. I am In an area that will constantly have severe lightning issues, hurricanes, wicked thunderstorms and high winds. How many CPEs did you replace in the last 12 months ? I have tracked and count 43 here. JohnnyO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Sent: Monday, November 14, 2005 11:03 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Insurance / Service Plan Offerings
George - that may work in your neck of the woods and I have been doing the same since day 1. This past year - we replaced over $8,000 worth of CPEs - that is almost a full months revenue for us Mind you - we dealt with hurricanes and severe lightning - but - - - we can no longer as a company sustain those types of hits That is 8k in equipment costs - not the additional 5k worth of labor for the trips to the CPE. I am In an area that will constantly have severe lightning issues, hurricanes, wicked thunderstorms and high winds. How many CPEs did you replace in the last 12 months ? I have tracked and count 43 here. JohnnyO -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of George Sent: Monday, November 14, 2005 11:03 PM To: WISPA General List Subject: Re: [WISPA] Insurance / Service Plan Offerings JohnnyO wrote: > We're coming into our 3rd year of operation soon. I am curious how > others are doing combat against the replacement / repair / service call > costs associated with having to replace CPE end equipment. > > I was thinking about offering a service plan like DirecTV / Cellular > Companies etc, but not sure how to introduce or impiliment this. > > Help and suggestions would be appreciated. > > Regards, > > JohnnyO > I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] 900Mhz Grid vs Yagi
Hi, I just looked on Pac Wireless' website, as well as Wisp-router and I don't see the 900mhz grid. Do you have a part number or direct link? Travis Microserv Rick Smith wrote: Tom, Check out the newer 15 dbi grid from Pac - it's the same grid as the 2.4 parabolic, but with a 900 mhz horn. It ROCKS in comparison to many other antennas, and I've used 'em all. I'm usin this particular one with Canopy - 12 miles out and -74 through thick trees on the CPE end. 7 jitter! R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 14, 2005 8:09 PM To: WISPA General List Subject: [WISPA] 900Mhz Grid vs Yagi PacWireless makes a 900Mhz 18 dbi Parabolic grid antenna. M2 makes a 900Mhz 17.5 dbi Yagi antenna. We had found that 900 was very particular to placement, even a few inches in one direction or the other can make big differences in link quality. Has anyone used both antenna types for a specific link, to compare the properties of each of the designs. The thought is whether the wider surface area of the parabolic antenna would make it better to survive signal obstruction from swaying trees in forests. The prabolic is a monster at 3 ft dia, s othe Yagi would clearly be a better choice for a roof top chimney install based on cosmetics. But wondering from a performance perspective the comparison. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
Title: Insurance / Service Plan Offerings Hi, We retain ownership of the CPE, so when it goes bad, we replace it free of charge. If they are out of contract, we have them sign a new 12 month contract and they get it for free. Travis Microserv JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Insurance / Service Plan Offerings
JohnnyO wrote: We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO I am eating it. I bet if I told every customer who's radio died that they had to pay for a new one, we'd have less subs. I own all the radios and accept the responsibility. another way I look at it, it's cheaper to give an existing sub a 100.00 radio and get 500 for the next 12 months than it is to go without revenue and have to pay for advertising to get new subs to replace the one that I just lost. But, it's the way I do this in this market. George -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Insurance / Service Plan Offerings
Title: Insurance / Service Plan Offerings We're coming into our 3rd year of operation soon. I am curious how others are doing combat against the replacement / repair / service call costs associated with having to replace CPE end equipment. I was thinking about offering a service plan like DirecTV / Cellular Companies etc, but not sure how to introduce or impiliment this. Help and suggestions would be appreciated. Regards, JohnnyO -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Packet Aggregation
I know that Packeteer does it but it's a bit on the expensive side. I'm surprised there isn't a FreeBSD or Linux package out there that does it :( -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Harnish Sent: 15 November 2005 02:25 To: 'WISPA General List' Subject: RE: [WISPA] Packet Aggregation Sure Paul, its called Karlnet, no wait YDI, no wait, Terabeam, no wait, Proxim, yeah that what it is this week, Turbocell on 802.11a Atheros. You can find the information on the www.karlnet.com, nope that's gone now, www.ydi.com, nope that's gone now, www.terabeam.com, oops that just got forwarded to www.proxim.com website. Your only task now is to find someone to sell it to you, then your next task is to find someone that will support it for you. Whew, that was a lot of work! Good Luck Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: Monday, November 14, 2005 7:02 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] Packet Aggregation I've posted a couple of times on the forum but no responses. Is there an alternative out there? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 14 November 2005 23:57 To: WISPA General List Subject: Re: [WISPA] Packet Aggregation In my experience, the guys at MikroTik are quite responsive to user requests. Have you asked them about this? -- Blair Davis West Michigan Wireless, ISP 269-686-8648 Paul Hendry wrote: >Because a lot of traffic crossing our network is in packets smaller than >1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller >packets together. Throughput wise this seems to work very well and we see a >big improvement on the amount of data we can pass over our wireless >backhaul. The problem is that M3P adds about 15ms of delay in each direction >so you are adding 30ms of delay to most none UDP streams. This is the amount >of time that M3P waits to fill the 1500 byte. > >Does anyone know of an alternative system or open source software that does >packet aggregation but is a little more configurable? Ideally I would like >to be able to change the amount of time that the aggregator waits to fill >it's payload and therefore reduce the overall delay. > >Cheers, > >P. > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Atheros speed WRAP vs RB532
Will do. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Harnish Sent: 15 November 2005 02:13 To: 'WISPA General List' Subject: RE: [WISPA] Atheros speed WRAP vs RB532 Paul, Send me the coordinates of the link and pictures from antenna height at both ends looking down the path and I can give you a pretty good idea..ok, here is where a disclaimer goes :P Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: Monday, November 14, 2005 2:08 PM To: 'WISPA General List' Subject: RE: [WISPA] Atheros speed WRAP vs RB532 Just as a rough guide, would it be likely that you could get half the rated throughput on the Orthogon units over 2k through very lite trees? The problem I have is that I haven't been able to complete a site survey but have been told that they had a link during last winter which dropped once leaves grew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: 14 November 2005 15:53 To: WISPA General List Subject: Re: [WISPA] Atheros speed WRAP vs RB532 For the profile, I use RadioMobile and export the path to a text file. I then put the first 2 columns into the second tab on the spreadsheet. Works great. On Nov 13, 2005, at 2:03 PM, Dylan Oliver wrote: > Paul, > > I haven't tried the Spectra yet but am planning some links with the > Link Estimator. Are you familiar with this tool? You may have to > attend a training session to get access to the partner site and > profile generator. However I'd be happy to generate a path report > for you .. the tool is quite good, and at least the sales people > will tell you it's very accurate - if it says 99.999% reliability, > that's what you'll get. Trees and other obstructions can be added > to the profile manually. The single biggest factor is antenna > gain .. you just won't get 200 Mbps over 40 km without 4' dishes on > both sides. > > Best, > -- > Dylan Oliver > Primaverity, LLC > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Packet Aggregation
Sure Paul, its called Karlnet, no wait YDI, no wait, Terabeam, no wait, Proxim, yeah that what it is this week, Turbocell on 802.11a Atheros. You can find the information on the www.karlnet.com, nope that's gone now, www.ydi.com, nope that's gone now, www.terabeam.com, oops that just got forwarded to www.proxim.com website. Your only task now is to find someone to sell it to you, then your next task is to find someone that will support it for you. Whew, that was a lot of work! Good Luck Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: Monday, November 14, 2005 7:02 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] Packet Aggregation I've posted a couple of times on the forum but no responses. Is there an alternative out there? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 14 November 2005 23:57 To: WISPA General List Subject: Re: [WISPA] Packet Aggregation In my experience, the guys at MikroTik are quite responsive to user requests. Have you asked them about this? -- Blair Davis West Michigan Wireless, ISP 269-686-8648 Paul Hendry wrote: >Because a lot of traffic crossing our network is in packets smaller than >1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller >packets together. Throughput wise this seems to work very well and we see a >big improvement on the amount of data we can pass over our wireless >backhaul. The problem is that M3P adds about 15ms of delay in each direction >so you are adding 30ms of delay to most none UDP streams. This is the amount >of time that M3P waits to fill the 1500 byte. > >Does anyone know of an alternative system or open source software that does >packet aggregation but is a little more configurable? Ideally I would like >to be able to change the amount of time that the aggregator waits to fill >it's payload and therefore reduce the overall delay. > >Cheers, > >P. > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Atheros speed WRAP vs RB532
Paul, Send me the coordinates of the link and pictures from antenna height at both ends looking down the path and I can give you a pretty good idea..ok, here is where a disclaimer goes :P Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Office 260-307-4000 Cell 260-918-4340 VoIP www.oibw.net [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: Monday, November 14, 2005 2:08 PM To: 'WISPA General List' Subject: RE: [WISPA] Atheros speed WRAP vs RB532 Just as a rough guide, would it be likely that you could get half the rated throughput on the Orthogon units over 2k through very lite trees? The problem I have is that I haven't been able to complete a site survey but have been told that they had a link during last winter which dropped once leaves grew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: 14 November 2005 15:53 To: WISPA General List Subject: Re: [WISPA] Atheros speed WRAP vs RB532 For the profile, I use RadioMobile and export the path to a text file. I then put the first 2 columns into the second tab on the spreadsheet. Works great. On Nov 13, 2005, at 2:03 PM, Dylan Oliver wrote: > Paul, > > I haven't tried the Spectra yet but am planning some links with the > Link Estimator. Are you familiar with this tool? You may have to > attend a training session to get access to the partner site and > profile generator. However I'd be happy to generate a path report > for you .. the tool is quite good, and at least the sales people > will tell you it's very accurate - if it says 99.999% reliability, > that's what you'll get. Trees and other obstructions can be added > to the profile manually. The single biggest factor is antenna > gain .. you just won't get 200 Mbps over 40 km without 4' dishes on > both sides. > > Best, > -- > Dylan Oliver > Primaverity, LLC > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] 900Mhz Grid vs Yagi
Tom, Check out the newer 15 dbi grid from Pac - it's the same grid as the 2.4 parabolic, but with a 900 mhz horn. It ROCKS in comparison to many other antennas, and I've used 'em all. I'm usin this particular one with Canopy - 12 miles out and -74 through thick trees on the CPE end. 7 jitter! R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Monday, November 14, 2005 8:09 PM To: WISPA General List Subject: [WISPA] 900Mhz Grid vs Yagi PacWireless makes a 900Mhz 18 dbi Parabolic grid antenna. M2 makes a 900Mhz 17.5 dbi Yagi antenna. We had found that 900 was very particular to placement, even a few inches in one direction or the other can make big differences in link quality. Has anyone used both antenna types for a specific link, to compare the properties of each of the designs. The thought is whether the wider surface area of the parabolic antenna would make it better to survive signal obstruction from swaying trees in forests. The prabolic is a monster at 3 ft dia, s othe Yagi would clearly be a better choice for a roof top chimney install based on cosmetics. But wondering from a performance perspective the comparison. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] 900Mhz Grid vs Yagi
PacWireless makes a 900Mhz 18 dbi Parabolic grid antenna. M2 makes a 900Mhz 17.5 dbi Yagi antenna. We had found that 900 was very particular to placement, even a few inches in one direction or the other can make big differences in link quality. Has anyone used both antenna types for a specific link, to compare the properties of each of the designs. The thought is whether the wider surface area of the parabolic antenna would make it better to survive signal obstruction from swaying trees in forests. The prabolic is a monster at 3 ft dia, s othe Yagi would clearly be a better choice for a roof top chimney install based on cosmetics. But wondering from a performance perspective the comparison. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Packet Aggregation
I've posted a couple of times on the forum but no responses. Is there an alternative out there? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 14 November 2005 23:57 To: WISPA General List Subject: Re: [WISPA] Packet Aggregation In my experience, the guys at MikroTik are quite responsive to user requests. Have you asked them about this? -- Blair Davis West Michigan Wireless, ISP 269-686-8648 Paul Hendry wrote: >Because a lot of traffic crossing our network is in packets smaller than >1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller >packets together. Throughput wise this seems to work very well and we see a >big improvement on the amount of data we can pass over our wireless >backhaul. The problem is that M3P adds about 15ms of delay in each direction >so you are adding 30ms of delay to most none UDP streams. This is the amount >of time that M3P waits to fill the 1500 byte. > >Does anyone know of an alternative system or open source software that does >packet aggregation but is a little more configurable? Ideally I would like >to be able to change the amount of time that the aggregator waits to fill >it's payload and therefore reduce the overall delay. > >Cheers, > >P. > > > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Packet Aggregation
In my experience, the guys at MikroTik are quite responsive to user requests. Have you asked them about this? -- Blair Davis West Michigan Wireless, ISP 269-686-8648 Paul Hendry wrote: Because a lot of traffic crossing our network is in packets smaller than 1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller packets together. Throughput wise this seems to work very well and we see a big improvement on the amount of data we can pass over our wireless backhaul. The problem is that M3P adds about 15ms of delay in each direction so you are adding 30ms of delay to most none UDP streams. This is the amount of time that M3P waits to fill the 1500 byte. Does anyone know of an alternative system or open source software that does packet aggregation but is a little more configurable? Ideally I would like to be able to change the amount of time that the aggregator waits to fill it's payload and therefore reduce the overall delay. Cheers, P. -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] New Tower Installation - Check out these towers!
Not suppose to climb them, I guess. Tom DeReggi wrote: I'd be scared to climb one of those, with the section of the tower weighing less than I do. I wonder how strong they are from the perspective of climbing safety. For example if a fall takes a direction jult to the cross member tied off to? Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband - Original Message - From: Brian Rohrbacher To: [EMAIL PROTECTED] ; WISPA General List Sent: Friday, November 11, 2005 8:33 AM Subject: Re: [WISPA] New Tower Installation - Check out these towers! Still have to call about the 90 footers. Brian Webster wrote: Here is the price list http://www.isotruss.com/met-towers.asp Thank You, Brian Webster www.wirelessmapping.com Free World Dialup #481416 -Original Message- From: Brian Rohrbacher [mailto:[EMAIL PROTECTED]] Sent: Friday, November 11, 2005 12:19 AM To: WISPA General List Subject: Re: [WISPA] New Tower Installation - Check out these towers! Just came across these. They look pretty neat. http://www.isotruss.com/wifi-towers.htm http://www.dslreports.com/forum/remark,14765077 http://www.dslreports.com/forum/remark,8672279?hilite=isotruss If I get a chance I am going to see what a 90 footer costs. If anyone else calls before I do, post it here so we can all see the price on these bad boys. Brian Matt Larsen - Lists wrote: Hello all, I'm getting ready to put up my first tower (finally found a place where there weren't any existing towers available) and would like to get some comments from others about whether I am doing the right things. My goal is to mount a 2' PacWireless 5Ghz dish, a 3' PacWireless 5Ghz dish and 13db PacWireless H-pol Omni antenna at the 80 foot level. The tower site used to have a very large radio tower on it, so the base and guy points are all still in place. The base has a single pin in the center, and the guy anchors are 90' out at 120 degree intervals. My intention is to put up a Rohn 45 equivalent tower - 8 sections and a 5' base section for a total of 85' of tower; two sets of guy points - one at 40' and another at 80'. The antennas will mount right above the guy wires. Here are some of the questions that I have: 1) Should I use a flat base or an angled base (single pin) There is already a pin in place from the old tower, but I don't know whether it makes sense to use it or just put a flat base with new anchors in. 2) Does it make sense to put a hinged base at the bottom, assemble the tower and raise it with a winch -- or should I use a gin pole to put it together? 3) I have not ordered my tower pieces yet. New costs look to be about $3200 for 8 10' sections, base, 2 guy brackets, 1000' of guy wire, guy wire ground kit and 6 turnbuckles. Am I missing anything on this list? Does anyone have this sort of thing laying around that they would like to sell? I'm just looking for some recommendations as to whether this is the right price range. Thanks for your assistance guys! Matt Larsen [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.12.8/165 - Release Date: 11/9/2005 No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] New Tower Installation - Check out these towers!
I'd be scared to climb one of those, with the section of the tower weighing less than I do. I wonder how strong they are from the perspective of climbing safety. For example if a fall takes a direction jult to the cross member tied off to? Tom DeReggiRapidDSL & Wireless, IncIntAirNet- Fixed Wireless Broadband - Original Message - From: Brian Rohrbacher To: [EMAIL PROTECTED] ; WISPA General List Sent: Friday, November 11, 2005 8:33 AM Subject: Re: [WISPA] New Tower Installation - Check out these towers! Still have to call about the 90 footers.Brian Webster wrote: Here is the price list http://www.isotruss.com/met-towers.asp Thank You, Brian Webster www.wirelessmapping.com Free World Dialup #481416 -Original Message- From: Brian Rohrbacher [mailto:[EMAIL PROTECTED]] Sent: Friday, November 11, 2005 12:19 AM To: WISPA General List Subject: Re: [WISPA] New Tower Installation - Check out these towers! Just came across these. They look pretty neat. http://www.isotruss.com/wifi-towers.htm http://www.dslreports.com/forum/remark,14765077 http://www.dslreports.com/forum/remark,8672279?hilite=isotruss If I get a chance I am going to see what a 90 footer costs. If anyone else calls before I do, post it here so we can all see the price on these bad boys. Brian Matt Larsen - Lists wrote: Hello all, I'm getting ready to put up my first tower (finally found a place where there weren't any existing towers available) and would like to get some comments from others about whether I am doing the right things. My goal is to mount a 2' PacWireless 5Ghz dish, a 3' PacWireless 5Ghz dish and 13db PacWireless H-pol Omni antenna at the 80 foot level. The tower site used to have a very large radio tower on it, so the base and guy points are all still in place. The base has a single pin in the center, and the guy anchors are 90' out at 120 degree intervals. My intention is to put up a Rohn 45 equivalent tower - 8 sections and a 5' base section for a total of 85' of tower; two sets of guy points - one at 40' and another at 80'. The antennas will mount right above the guy wires. Here are some of the questions that I have: 1) Should I use a flat base or an angled base (single pin) There is already a pin in place from the old tower, but I don't know whether it makes sense to use it or just put a flat base with new anchors in. 2) Does it make sense to put a hinged base at the bottom, assemble the tower and raise it with a winch -- or should I use a gin pole to put it together? 3) I have not ordered my tower pieces yet. New costs look to be about $3200 for 8 10' sections, base, 2 guy brackets, 1000' of guy wire, guy wire ground kit and 6 turnbuckles. Am I missing anything on this list? Does anyone have this sort of thing laying around that they would like to sell? I'm just looking for some recommendations as to whether this is the right price range. Thanks for your assistance guys! Matt Larsen [EMAIL PROTECTED] -- WISPA Wireless List: wireless@wispa.orgSubscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wirelessArchives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message.Checked by AVG Free Edition.Version: 7.1.362 / Virus Database: 267.12.8/165 - Release Date: 11/9/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Packet Aggregation
Because a lot of traffic crossing our network is in packets smaller than 1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller packets together. Throughput wise this seems to work very well and we see a big improvement on the amount of data we can pass over our wireless backhaul. The problem is that M3P adds about 15ms of delay in each direction so you are adding 30ms of delay to most none UDP streams. This is the amount of time that M3P waits to fill the 1500 byte. Does anyone know of an alternative system or open source software that does packet aggregation but is a little more configurable? Ideally I would like to be able to change the amount of time that the aggregator waits to fill it's payload and therefore reduce the overall delay. Cheers, P. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
RE: [WISPA] Atheros speed WRAP vs RB532
Just as a rough guide, would it be likely that you could get half the rated throughput on the Orthogon units over 2k through very lite trees? The problem I have is that I haven't been able to complete a site survey but have been told that they had a link during last winter which dropped once leaves grew. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Petermann Sent: 14 November 2005 15:53 To: WISPA General List Subject: Re: [WISPA] Atheros speed WRAP vs RB532 For the profile, I use RadioMobile and export the path to a text file. I then put the first 2 columns into the second tab on the spreadsheet. Works great. On Nov 13, 2005, at 2:03 PM, Dylan Oliver wrote: > Paul, > > I haven't tried the Spectra yet but am planning some links with the > Link Estimator. Are you familiar with this tool? You may have to > attend a training session to get access to the partner site and > profile generator. However I'd be happy to generate a path report > for you .. the tool is quite good, and at least the sales people > will tell you it's very accurate - if it says 99.999% reliability, > that's what you'll get. Trees and other obstructions can be added > to the profile manually. The single biggest factor is antenna > gain .. you just won't get 200 Mbps over 40 km without 4' dishes on > both sides. > > Best, > -- > Dylan Oliver > Primaverity, LLC > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Atheros speed WRAP vs RB532
For the profile, I use RadioMobile and export the path to a text file. I then put the first 2 columns into the second tab on the spreadsheet. Works great. On Nov 13, 2005, at 2:03 PM, Dylan Oliver wrote: Paul, I haven't tried the Spectra yet but am planning some links with the Link Estimator. Are you familiar with this tool? You may have to attend a training session to get access to the partner site and profile generator. However I'd be happy to generate a path report for you .. the tool is quite good, and at least the sales people will tell you it's very accurate - if it says 99.999% reliability, that's what you'll get. Trees and other obstructions can be added to the profile manually. The single biggest factor is antenna gain .. you just won't get 200 Mbps over 40 km without 4' dishes on both sides. Best, -- Dylan Oliver Primaverity, LLC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Marlon not awake
Hey Marlon, I asked you for the contact information of the person in Ottawa. (damn it is hard to get good help these days) >:o You getting so famous it is hard trying to talk to you. Maybe I should make like I am as famous as you. :-P Just trying to get the ball rolling up here in the Frozen North. But we are little concerned, we have had no snow in our area yet, so to the person who has been hi-jacking our snowstorm, can we have it back, before you used it. :-$ It is Monday I thought I would start the week right ;-) -- You have a Good Day now, Carl A Jeptha http://www.airnet.ca office 905 349-2084 Emergency only Pager 905 377-6900 skype cajeptha -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/