I am currently using FreebSD 7.2 and I have just installed and configured
Fedora 11 on an external
hard drive so I can do some printing and other things. I was wondering how can
I get full access
to the Desktop (GUI) on FreeBSD for Fedora 11 on my external hard drive? Any
ideas?
___
Anyone have this all-in-one functioning correctly under FreeBSD?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
Hi, I am in the process of building a new PC and I am building this
machine (one of three... second will be OpenBSD Firewall for FreeBSD and a
third one for Windows.. you know games and all that stuff) and I am wondering
if I will have any problems with this motherboard amd its chipset. North Brid
>
> > Erik
> >
> > On Sat, Sep 19, 2009 at 09:16:36PM -0500, Bryan Cassidy wrote:
> > > Here is a little about my setup
> > >
> > > uname -a
> > > FreeBSD mail.comcast.net 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
> > > 08:49:1
Here is a little about my setup
uname -a
FreeBSD mail.comcast.net 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1
08:49:13 UTC 2009 r...@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
i386
Mutt 1.4.2.3i
Output from df -h
Filesystem SizeUsed Avail Capacity Mounted on
/dev/
Hello. My ISP is through Bellsouth FastAccess DSL and
I am trying to get my connection to stay up without
disconnected and having to run /etc/netstart everytime
it disconnects. I am very confused about how
connections are in general. I think it is a PPPoE. I
have to use a user name and password to
Running 4.10. I ran a 'make index' in /usr/ports just
now and i get the following error
Generating INDEX - please wait..tkscanfax-1.02:
"/usr/ports/japanese/tk80" non-existent -- dependency
list incomplete
===> comms/tkscanfax failed
*** Error code 1
1 error
Thanks
___
Hello. This is my setup.
I have installed Postfix and in my rc.conf I have the
following (not sure if some of the things I will post
to the list but why not just in case. The problem I am
having is this. I can download my e-mail using
fetchmail, filter it through procmail and read it with
Mutt jus
Hello. Running FreeBSD 4.10. I am using Mutt as my MUA
and want to use Postfix as my MTA. I have the
following in my /etc/rc.conf (This is everything
related to my network settings)
hostname="bsdjunky.homeunix.org"
ifconfig_xl0="inet my.ip.address netmask
255.255.255.0"
pccard_ifconfig="inet my.ip
Hello. Running FreeBSD 4.10. After I reboot with my
new ipfw.rules I can't load any webpages. I didn't try
by IP address cause I can't remember any off top at
the moment. Here is my following setup
In my kernel I have
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=
I havent posted to any of the freebsd mailing lists in
a few days/weeks and I tried to post a test e-mail to
the -test list and my e-mail never gets sent to the
list. This happened before, never figured it out.
Using Postfix/Mutt.
Thanks.
___
Just went and got an extra NIC card, and ordered static ip address and upgraded my
service. I have a quick question. If I am changing from dhcp to static is there
anything that I need to do in order to take advantage of static or to setup static?
Always had dhcp up until now. Not sure if I have
IC in this machine or do I move it to the machine that
will be acting as a firewall/router/gateway? How do I set this up? Still confused on
this part.
On Tue, May 11, 2004 at 12:26:59AM -0500, Micheal Patterson wrote:
>
>
> - Original Message -----
> From: "Bryan Cassid
Hello. I am currently running FreeBSD 4.9-RELEASE p-7. I am pretty comfortable with
FreeBSD for the most part and really enjoy using it on a day to day basis. This is my
thoughts. I have an older NEC PC that I would like to put to some use. First off I
don't know if I need any 'extra' hardware.
here ya go
CPUTYPE=p3
CFLAGS= -0 -pipe
CXXFLAGS+= -fmemoize-lookups -fsave-memoized
NOPROFILE= true
USA_RESIDENT= yes
NO_LPR= true
On Mon, May 10, 2004 at 04:33:19PM -0400, Joe Marcus Clarke wrote:
> On Mon, 2004-05-10 at 17:27, Bryan Cassidy wrote:
> > Sorry, I don't get wh
Sorry, I don't get what you mean by "use default cflags"?
On Mon, May 10, 2004 at 04:12:48PM -0400, Joe Marcus Clarke wrote:
> On Mon, 2004-05-10 at 17:09, Bryan Cassidy wrote:
> > I've had a few problems on my FreeBSD 4.9-RELEASE p-7 and did a re-install and
> &
I've had a few problems on my FreeBSD 4.9-RELEASE p-7 and did a re-install and fixed
everything I messed up. I just got done installing www/mozilla and did a chow -R
user:user .mozilla and ran 'mozilla' from the command line and I get the following
error
No running window found.
/usr/libexec/ld
0, Petre Bandac wrote:
> first portupgrade, then make deinstall/make reinstall, and at last - make install :-)
>
> petre
>
> On Mon, 3 May 2004 09:14:26 -0500 Anno Domini, the honourable Bryan Cassidy wrote
> using one of his keyboards:
>
>
> > What is the command you
I have installed the Nvidia drivers for my system and now when I exit fluxbox, kde,
window maker or any other wm/desktop environment it freezes on me with weird lines
going accross the screen and the only way to stop it is to ctr+alt+deleteand im
getting tired of doing this. the problem just sta
Hello. Been trying to download 4.9 so I can put it on my other box but
when downloading the iso (from any mirror) I get a error saying there
isnt enough space to download 49ebcty7.exe to /tmp. Whats going on? I
have the space. Here is the output from df -H
> df -H
FilesystemSize Used Avail
Hello there
On Sun, Feb 15, 2004 at 05:23:31AM -0600, Bryan Cassidy wrote:
>OK. That problem fixed. Now when I 'startx' It hangs when Loading
>Peripherals and then the splash screen goes away and it just sits there
>making me have to do a Control+Alt+Backspace. Any ideas?
>
OK. That problem fixed. Now when I 'startx' It hangs when Loading
Peripherals and then the splash screen goes away and it just sits there
making me have to do a Control+Alt+Backspace. Any ideas?
On Sun, Feb 15, 2004 at 10:48:39AM +0200, Andy Fawcett wrote:
>On Sunday 15 February 2004
This should get you going
ports/arabic
ports/chinese
ports/french
ports/german
ports/hebrew
ports/hungarian
ports/japanese
ports/korean
ports/polish
ports/portuguese
ports/russian
ports/ukrainian
ports/vietnamese
doc/da_*
doc/de_*
doc/el_*
doc/es_*
doc/fr_*
doc/it_*
doc/ja_*
doc/nl_*
doc/no_*
doc/
I am running FreeBSD 4.9 and have just installed KDE 3.2 from the ports
without any errors. I know for a fact I have X configured so it couldnt
be that. I added exec startkde to my .xinitrc file and ran 'startx' and
I get the following
There was an error setting up inter-process communications for
Just wondering if people wouldn't mind sharring their /etc/make.conf
settings with others.
Here's mine:
CPUTYPE?=p3
CFLAGS= -O -pipe
CXXFLAGS+= -fmemoize-lookups -fsave-memoized
NOPROFILE= true
USA_RESIDENT= yes
SUP=/usr/local/bin/cvsup
SUPFLAGS= -g -L 2
SUPHOST=cvs
I have a bunch of mp3s and I want to burn them onto a cd so I can play
them in my car cd player. Is there any recomendations on how to go about
doing this? Would greatly appreciate it.
pgp0.pgp
Description: PGP signature
Hi. I have been using mutt + procmail + fetchmail for a while now and
have pretty much all my filters working but a few. Here is my .muttrc
file
set folder=~/Mail
set hostname=bellsouth.net
set realname="Bryan Cassidy"
set hostname=bellsouth.net
set beep_new=yes
set abort_nosubject=a
pgp0.pgp
Description: PGP signature
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
as
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Just bought a Pioneer DVD drive. I hook the DVD drive
up, go to the bios and set everything to *defaults*
and make sure that *ATAPI CD-ROM drive* is set to the
first bootable device. I don't know why it says
ATAPI-CD-ROM drive. Shouldn't it say DVD cause I
replaced the cdrom with the dvd-rom? Well,
When I launch http://localhost:631/admin after installed and setting up
CUPS with these instructions
http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325&highlight=cups
and I get the following error after entering the following information
Request Entity Too Large The request is
Is there anyway when viewing your folders inside of Mutt to view the
amount of e-mails instead of the size of the total e-mails?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail t
I am using FreeBSD 4.8 with Mutt 1.5 and Procmail 3.22 and have setup
some filters. In my .procmailrc I have the following
:0: * [EMAIL PROTECTED] FreeBSD_Questions :0: * ^TO_questions
FreeBSD_Questions
:0: * .* Default
And in my .muttrc file I have the following
subscribe freebsd-questions su
Hello. Fresh install of FreeBSD 4.8. I also installed
mutt-devel + fetchmail. I setup a simple .fetchmailrc
file with
poll mail.isp.net
proto pop3
username "usrname"
password "passwd"
and when I first opened Mutt it asked if I wanted to
created ~/Mail and I said yes. When I run 'fetchmail'
I don'
OK. I've added that to my .procmailrc but when I load Mutt it
still doesn't show any group called freebsd-questions. Do I
have to create a ~/Maildir/freebds-questions directory? I am
using Postfix + Courier-IMAP + SquirrelMail + Procmail so I'm
using Maildir.
On Thu, Dec 18,
I have just started using Mutt again. I would rather use Mutt
if I can just setup my filters like I have in Sylpheed. I don't
know if this is what Procmail filtering is suppose to do but
this is what I want and I am very confused about setting up
mail filters in Mutt. Have no clue where
Hello. I'm using FreeBSD 4.8 with my Logitech QuickCam (I think
it's a quick cam, kinda old.) Here is the output from dmesg |
grep ugen
ugen0: Logitech Camera, rev 1.00/1.00, addr 2
I would really like to get my camera configured and whatever
else needs to get done so I can take some pictures wit
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello. I'm using FreeBSD 4.8 p14 and have a USB Web Cam that I would
like to use. I have the following in my /etc/rc.conf file
usbd_load="YES"
and the following in /boot/loader.conf
usb_load="YES"
ums_load="YES"
umass_load="YES"
Not sure if these
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
How does one go about configuring and using a usb wecam? I want to take
a couple of pictures but not sure how to go about doing this. Here is
the output from dmesg for my webcam
ugen0: Logitech Camera, rev 1.00/1.00, addr 3
Thanks
-BEGIN PGP SIGN
OK. The PC I am using now is the one I like to do all my work
on but want to get a router. I was told to find a older PC and
set it up as a router. Well, I have the extra PC now and I
just need to set it up. My main PC runs apache webserver, php,
squirrelmail, courier-imap, cups and a few other thi
DSL cable.
Plus what into what? Kinda confused here. I run these services on my
box. Thanks for the help.
Bryan
CUPS
Apache
PHP
COURIER-IMAP
POSTFIX
SquirrelMail
On Thu, 04 Dec 2003 03:15:38 -0500
Scott W <[EMAIL PROTECTED]> wrote:
> Bryan Cassidy wrote:
>
> >-BEGIN PGP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello everyone. Hows everyone doing tongith/today? Well, I'm taking a
week off of work and thought I would read up on Security/Networking and
anything else to do with making my system/webserver secure. I am going
to Best Buy (ya i know, but it's the on
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Of course you need apache installed. It will print out on the screen after you get
done with a make install clean on ddclient but after you copy the appropriate files
just edit /usr/local/etc/ddclient.conf Here I have attached my ddclient.conf file
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
What about formating the zip drive? Is there anything in the ports for
for formating a zip drive?
On Tue, 2 Dec 2003 08:13:06 +1100
"DG" <[EMAIL PROTECTED]> wrote:
> Greetings,
>
> I have a 5.1-RELEASE installation with an IDE Zip drive (amongst ot
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Gaim running perfect on FreeBSD 4.8-RELEASE p14
On 01 Dec 2003 11:33:19 -0500
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> David Gerard <[EMAIL PROTECTED]> writes:
>
> > Gaim requires perl 5.8 or higher just to be installed - its 'l33t++
> > custom c
s.
On Mon, 1 Dec 2003 03:53:00 +0100
Melvyn Sopacua <[EMAIL PROTECTED]> wrote:
> On Monday 01 December 2003 04:39, Bryan Cassidy wrote:
>
> > Well, I take that back. It worked on 1 file and then ir started
> > erasing the contents of the file.
> >
> > On Sun, 30
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Well, I take that back. It worked on 1 file and then ir started erasing
the contents of the file.
On Sun, 30 Nov 2003 21:29:13 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> S
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sorry about sending you a e-mail directly. The tr -d '/r' < name >
newname worked perfect. Thanks.
On Sun, 30 Nov 2003 19:17:46 -0700
Robin Schoonover <[EMAIL PROTECTED]> wrote:
> On Sun, 30 Nov 2003 21:16:02 -0600, Bryan Ca
I've downloaded a couple of .xhtml files and they have ^M characters
all through it. I tried the col -b < name > newname command on these
files but when I do that it erases the whole document. Any ideas?
___
[EMAIL PROTECTED] mailing list
http://lists.fre
bsdsys:bsdsys default/ without any luck though.
On Sat, 29 Nov 2003 22:23:36 -0500
Joe Marcus Clarke <[EMAIL PROTECTED]> wrote:
> On Sat, 2003-11-29 at 23:24, Bryan Cassidy wrote:
> > If I try to start mozilla 1.5 with 'mozilla' and I select the
> > profile which is
If I try to start mozilla 1.5 with 'mozilla' and I select the profile
which is default for now and click Start Mozilla I get the following
error
Component returned failure code: 0x80004005 (NS_ERROR_FAILURE)
[nslProfileInternal.currentProfile]
I checked the file permissions on mozilla and they we
Trying to install www/phpbb. I get a Checksum mismatch error for
phpBB-2.0.6.tar.bz2. Don't know how to fix Checumsum mismatch
errors. Thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, se
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Might want to check the handbook on printing and read this how-to on
setting up CUPS
http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325
On Fri, 28 Nov 2003 20:46:07 -0800
"Alex Wu" <[EMAIL PROTECTED]> wrote:
> Hi, I am fairly new t
hitexample cvsup5.FreeBSD.org.
> save changes and exit file(s)
> cvsup -g -L 2 ports-supfile
> cvsup -g -L 2 standard-supfile
>
> Just a few of my thoughts. Good luck.
> Pat
>
> On Wed, 2003-11-26 at 03:04, David Gerard wrote:
>
> > On 11/26/03 01:52, Bryan
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Why not just use the ports? Works fine on my end with FreeBSD
4.8-RELEASE
On Tue, 25 Nov 2003 22:06:27 +
David Gerard <[EMAIL PROTECTED]> wrote:
> We're trying to install gaim on a 4.8-RELEASE box, and it's
> acting like the package is broken.
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I got a quick question (just one for this minute).
I was told I should add a hostname. (my domain name maybe?
bsdjunky.dyndns.org? Will that do?) He said I should put an entry in
/etc/hosts that maps the IP of your box to the hostname you gave it.
The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I'm sorry. Not Procmail I meant Postfix. Sorry about that
On Tue, 25 Nov 2003 16:07:12 +0100
Massimiliano Stucchi <[EMAIL PROTECTED]> wrote:
> On Tue, 25 Nov 2003 06:44:12 -0800 (PST)
> bryan cassidy <[EMAIL PROTECTED]> wro
iano Stucchi <[EMAIL PROTECTED]> wrote:
> On Tue, 25 Nov 2003 06:44:12 -0800 (PST)
> bryan cassidy <[EMAIL PROTECTED]> wrote:
>
> > Just a quick question. Bellsouth FastAccess DSL (not
> > lite) is my ISP. I use my [EMAIL PROTECTED] for
> > pretty much all my e-
Just a quick question. Bellsouth FastAccess DSL (not
lite) is my ISP. I use my [EMAIL PROTECTED] for
pretty much all my e-mails. It used POP3 to recieve
mail. Is this correct? Kinda new to POP,POP3, IMAP,
SMTP etc. I think the protocol for sending is SMTP.
Can I use SquirrelMail + Procmail to send/
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Here's the current setup that I have came up with. I think I would be pretty happy
with it as long as I don't have any problems in FreeBSD. If I have problems I want
them to beable to be fixed ya know?
Antec PLUSVIEW1000AMG Chassis
AMD Tyan S2466 (
fer from the oepnssh system
> binary? I have looked all through the handbook and faq's but could not
> find a definitive answer.
>
> Thanks
> Kevin McKay
>
> - Original Message -
> From: "Bryan Cassidy" <[EMAIL PROTECTED]>
> To: "Kevin
I don't know anything about using sysinstall for security
patches/upgrades etc. WHat your looking for I think is cvsup. Please
read the handbook on Using CVSUP to get the latests source updates,
security patches for your release and even updating to a different
RELEASE or -CURRENT or -STABLE.
On W
I don't know anything about using sysinstall for security
patches/upgrades etc. WHat your looking for I think is cvsup. Please
read the handbook on Using CVSUP to get the latests source updates,
security patches for your release and even updating to a different
RELEASE or -CURRENT or -STABLE.
On W
I've never used sysinstall for anything but installing the operating
system. I'm sure what you want is cvsup. Use the
/usr/share/examples/cvsup/standard-supfile for updating source then
follow instructions in handbook on make world to update the system.
On Tue, 18 Nov 2003 21:09:03 -0800
"Kevin Mc
DVD-Rom/CD-Rom
PIONEER DVR-106BK DVD-Recordable (Black Bezel) DVD-R DVD-RW DVD+R
DVD+RW
Put all this in a Antec PLUS1080AMG Chassis
On Tue, 18 Nov 2003 17:58:23 -0800 (PST)
Dan Strick <[EMAIL PROTECTED]> wrote:
> On Mon, 17 Nov 2003, Bryan Cassidy wrote:
> >>
> > I suc
I got these when doing a 'make install clean' in kde3 myself but the
port installed. is the install stoping or are you just seeing these
messages and the install is still going? If it stops the install then
give us the actual error message. I'm sure this isn't a error. If so,
then my install with i
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Oh no. I must have explained myself wrong. $400.00 is just for starters.
I know for a fact I'm gonna buy that case so that leaves me with say
$300.00 to be on the safe side. Besides the case I would like the
motherboard to be the first actual piece of
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I suck when it comes to hardware. I know so little about hardware. My
dad said he is gonna get me about $400.00 worth of computer parts for
Christmas/Birthday sence they are so close so I can start building a new
custom PC. I have already picked out th
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
uname -mrs
FreeBSD 4.9-RELEASE i386
using mplayer when this happens
Nov 17 07:48:23 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST
asc=0x6f ascq=0x04 error=0x04
Nov 17 07:48:23 bellsouth /kernel: acd0: REPORT_KEY - ILLEGAL REQUEST
asc=0x2c
Have you read the Handbook on printing? Might wanna check this out for
installing cups
http://www.freebsdforums.com/forums/showthread.php?s=&threadid=15325
HTHs
On Sat, 15 Nov 2003 21:03:34 -0500
Barry Skidmore <[EMAIL PROTECTED]> wrote:
> I am using FreeBSD-4.9-RELEASE on an i386 machine with
Kinda new to this. Had to remove the ~/.gnupg dir and re-run gpg
--gen-key as 'user' and it works fine now as you can see. Thanks for the
response though. I appreciate it.
On Sat, 15 Nov 2003 09:04:37 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> This is what I get when I
'm wrong but I think you have to generate
> your key AS the user you want to use it under. Looks like maybe you
> created a gpg key for ROOT, not Bryan Cassidy.
>
> gpg --list-keys
>
> ...should help clarify/confirm this.
>
>
>
>
> On Fri, 14 Nov 2003 18:4
So, sorry to post so early. For some reason the cups port didn't install
cups-lpr. Sorry everyone.
On Sat, 15 Nov 2003 00:43:44 -0600
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> I really need to get printing working on FreeBSD 4.9. Let me say that
> again. I got FreeBSD to
I really need to get printing working on FreeBSD 4.9. Let me say that
again. I got FreeBSD to print with my HP OfficeJet T 45 through CUPS.
The test page from the admin on cups. How do I print my documents? I
really need to get this working tonight if anyway possible. Thanks in
advance.
___
I used FreeBSD 4.8 without any problems with GPGME + Sylpheed. This last
time using 4.8 I didn't install/configure gpgme + sylpheed but I did a
update to 4.9 and set this up but I get an error in Sylpheed saying
"Error could not find any key associated with currently selected key id
Is there a stand-alone dictionary port? I would like to have one on the
pc cause im gettin tired of goin online. thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL
I am currently using FreeBSD 4.8-RELEASE and I did a cvsup
/usr/share/examples/cvsup/standard-supfile to a RELENG_4_8. I haven't
done a build/install world and finished the update of the system. What
I'm wondering is sence I did a cvsup to the latest security patches etc
for 4.8 should I go on and
I am currently using FreeBSD 4.8-RELEASE and I did a cvsup
/usr/share/examples/cvsup/standard-supfile to a RELENG_4_8. I haven't done a
build/install world and finished the update of the system. What I'm wondering is sence
I did a cvsup to the latest security patches etc for 4.8 should I go on a
Thanks. Just what I was looking for.
On Wed, 12 Nov 2003 23:12:30 +0100
Jakob Breivik Grimstveit <[EMAIL PROTECTED]> wrote:
> On Thu, 2003-11-13 at 00:01, Bryan Cassidy wrote:
>
> > Trying to figure out how to find out the size of a file.
>
> Try...
>
Trying to figure out how to find out the size of a file.
thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I get these in my log (messages) when I play DVDs. The movie plays fine, without any
problem what so ever.
Nov 9 20:16:46 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL
REQUEST asc=0x30 ascq=0x02 error=0x04
Nov 9 20:17:17 bellsouth /kernel: acd0: READ_DVD_STRUCTURE - ILLEGAL
REQUEST asc
Here is the output from dmesg on my DVD
acd0: DVD-ROM at ata1-master PIO4
Using FreeBSD 4.8
When I play a DVD with mplayer (usually with these options)
mplayer -brightness 9 -autosync 30 -dvd 1 /dev/dvd
I can play the DVD without ANY problems what so ever. The problem is
this. Say I just boot
Well, I did that and when I try mplayer -vo dga -dvd 2
/dev/dvd I get the following error
dev/dvd I get the following error
Reading config file
/usr/local/share/mplayer/mplayer.conf: No such file or
directory
Reading config file /home/bsdsys/.mplayer/config
Reading /home/bsdsys/.mplayer/codecs.co
I just bought a cheap ATAPI/IDE DVD drive from best
buy. It's a Digital Research DRDVD1640. The box didn't
say it was missing anything and I checked the box and
there wasnt a IDE cable in there. It wasn't suppose to
be one cause it didn't come with one. So, I was like
thats fine for now I guess. So
th your powerful key:" -info "Whatever" -validate "Checking your
>key..." -invalid "Message"
Unmatched ".
>
Did I forget something?
On Wed, 22 Oct 2003 19:26:26 +0200
roland Mathieu <[EMAIL PROTECTED]> wrote:
> Bryan Cassidy ([EMAIL PROTECTED]
Yes, please provide the error message u get when you try to 'make
install clean' on the bash2 port.
On Wed, 22 Oct 2003 14:03:08 -0700
Kris Kennaway <[EMAIL PROTECTED]> wrote:
> On Wed, Oct 22, 2003 at 09:43:56AM -0500, Pratt, Benjamin E. wrote:
>
> > When I run "make install clean", in the /usr
Have u tried make reinstall in the bash2 port dir?
On Wed, 22 Oct 2003 09:43:56 -0500
"Pratt, Benjamin E." <[EMAIL PROTECTED]> wrote:
> Hello everyone -
>
> I recently decided to give FreeBSD 5.1 a try (I've only been running 4.8
> for a little bit) so I chose to do a minimal install and build w
cd /usr/ports//port/
make deinstall
On Wed, 22 Oct 2003 12:55:59 +1000
"Chris Richards" <[EMAIL PROTECTED]> wrote:
> Hi Everyone,
>
> I have installed 2 packages which inturn installed a bunch of
> dependencies... They are "imageindex-1.0.6" and "gallery-1.4.0.1" I was
> seeing which one I like
I've already fixed the problem. Thanks anyways.
On 21 Oct 2003 09:05:08 -0400
Lowell Gilbert <[EMAIL PROTECTED]> wrote:
> please. top-post, Don't
>
> Bryan Cassidy <[EMAIL PROTECTED]> writes:
>
> > I had a big problem yesterday with the PC. Don&
Tried this
$su
password:
#cd /dev
#sh MAKEDEV snd0
reboot.
I know FreeBSD 5.x is suppose to add those devices in automatically but I had the same
problem in FreeBSD 5.1 when i used it..
HTH
On Wed, 22 Oct 2003 08:54:19 +0800 (CST)
stevens root <[EMAIL PROTECTED]> wrote:
> Hi!
> I have inst
I've read through the man page for xlockmore and xautolock and cant
figure out (must be over looking it or something) but can't figure out
how to setup a .rc file for the two and how to setup xlockmore to
interact with xautolock.. So any help would be apprecited even if its
from the man page it's s
On Mon, 20 Oct 2003 05:04:38 -0500
Bryan Cassidy <[EMAIL PROTECTED]> wrote:
> I dont want to get into why I had to do a reinstall but I did. Now
> that I have mplayer installed and xmms installed I can play cds on
> xmms but can't play streaming audio from live365.com *any
I dont want to get into why I had to do a reinstall but I did. Now that
I have mplayer installed and xmms installed I can play cds on xmms but
can't play streaming audio from live365.com *anymore*. I use to be able
to play them. Which was yesterday. I can play videos in mplayer but I
don't have any
emand/aug03/prodigy90_med.mpg
The vid plays fine but no sound at all this time..
On Sat, 18 Oct 2003 14:57:27 +0530
Shantanoo Mahajan <[EMAIL PROTECTED]> wrote:
> +-- Bryan Cassidy [freebsd] [18-10-03 06:17 IST]:
> | I get this when trying to play movies in mplayer.
> |
> |
> On Mon, 2003-09-29 at 03:51, Bryan Cassidy wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > I was just wondering what people on the list thought. I don't want
> > to know any details on which is better or whatever just in general
I get this when trying to play movies in mplayer.
audio_setup: Can't open audio device /dev/dsp: Device busy
AO: [arts] can't connect to aRts soundserver
/dev/dsp: Device busy
AO: [esd] esd_open_sound failed: Resource temporarily unavailable
ao_nas: init(): Can't open nas audio server -> nosound
S
I'm trying to set the environment variable $XRACER_HOME to
/usr/local/share/xracer and don't know how. In the handbook it says
setenv ??? /path/ so I tried bothsetenv $XRACER_HOME
/usr/local/share/xracer and setenv XRACER_HOME /usr/local/share/xracer
and nothing works. Guess I don't get how to set
All this talk about vim made me wonder something.. BTW, I love vim
compared to vi. Don't know what it is yet but I felt very comfortable
and confident using it. I was just wondering. Is there a way to print
with a command "inside" vi? Sometimes I would just like to print the
file and don't want to
Thanks for all the replies. I'm gonna read up on some of the
things everyone told me but in the mean time I think I'm gonna
take garys advise and try vim.
On Wed, 8 Oct 2003 10:19:14 -0500 "Gary
Hi Bryan, > > On Wednesday, October 8, 2003, 6:22:45 AM, you
wrote: > > B> I want to know is there a w
I want to know is there a way to wrap the text in vi? In emacs you can
just hit Esc+q and it will wrap the text. How about vi?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
1 - 100 of 164 matches
Mail list logo
