Hi,
They're standard for whatever their interface is at the drive end:- ATA for
ATA/IDE, SATA for SATA etc., but the other end might vary between systems,
depending on the motherboard/adapter connection.
Ted
From: Avid_Fan spe...@gmail.com
To: G-Group
From: Dan dantear...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Monday, 30 January 2012, 5:06
Subject: Re: G4 PowerBook can't boot from Tiger Install DVD
At 10:35 PM -0500 1/29/2012, Barry Levine wrote:
So have we decided it's OK to share info about
My G5 ran happily with an ethernet router (DSL) and the Apple USB modem plugged
into a USB port.
Worked OK without any glitches...
Ted
From: ah...clem boneheads...@gmail.com
To: G-Group g3-5-list@googlegroups.com
Sent: Monday, 21 November 2011, 7:08
Hi all,
All of a sudden, Toast 10 has been unwilling to load of a friend's iMac. It was
(apparently) working a few weeks ago.
I asked him to send me any messages from the log, and I was provided with the
following. The console message reads:-
Jun 19 13:57:08 Macintosh
Loads of 'em.
Have added postmas...@fusenet.com to my Blocked addresses list so they
won't even reach my inbox
Ted
From: Jonas Ulrich jonasulrich3...@gmail.com
To: g3-5-list g3-5-list@googlegroups.com
Sent: Saturday, 11 June 2011, 20:43
Subject: Bounced mail?
I meant of course postmas...@fuse.net
From: Ted Treen ted.tr...@btinternet.com
To: g3-5-list@googlegroups.com g3-5-list@googlegroups.com
Sent: Saturday, 11 June 2011, 22:06
Subject: Re: Bounced mail?
Loads of 'em.
Have added postmas...@fusenet.com to my
From: Dan dantear...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Sunday, 5 June 2011, 19:22
Subject: Re: Power Mac G4 (AGP graphics)?
At 1:05 PM -0400 6/5/2011, John Callahan wrote:
My G4 works flawlessly while I am using it but if I leave it running it
From: Wayne Garrett groge...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Tuesday, 17 May, 2011 3:41:47
Subject: G5 1.8mhz spinning pinwheel
I tried 10.4 Tiger and it boots fine. I tried disk repair and am
getting incorrect # of threads It has tried
From: Wayne Garrett groge...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Tuesday, 17 May, 2011 3:11:56
Subject: G5 1.8mhz spinning pinwheel
My G5 mac (pci dual 1.8 2mgs ram 10.5.8 Has the mac chime, then the
pinwheel hash marks. Next, the fans get faster
snip
I did try saving the entire file as .jpg and opening in PhotoShop and I get the
message:
Could not open attachment6.jpeg because JPEG marker segment length is too
short (file may be truncated or incomplete).
Snip
I've had this message before in
Baldassare Guzzo wrote:
Same here.
On Apr 19, 2011, at 9:30 PM, Dan Palka turboda...@gmail.com
mailto:turboda...@gmail.com wrote:
I've received like 20 bounced emails today, some dating from years
ago, from a user on this group trinettejohn...@fuse.net
mailto:trinettejohn...@fuse.net
Has
Bruce Johnson wrote:
On Apr 1, 2011, at 2:40 PM, JoeTaxpayer wrote:
On Apr 1, 4:37 pm, Bruce Johnsonjohn...@pharmacy.arizona.edu wrote:
...something everyone who works with computers should have in their kit...
http://www.sparkfun.com/products/10622
I'm buying a bunch!
John Carmonne wrote:
On Mar 11, 2011, at 8:30 PM, Anne Keller-Smith wrote:
OK, went to Staples today cuz I was passing it, a waste of time. They
only
had USB drives. Did some googling and it looks like with an Intel Mac
any
Firewire will do, and most USB will work but that's not optimum.
From: Dan dantear...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Wednesday, 9 March, 2011 4:23:05
Subject: Re: spills wireless keyboard
At 4:29 PM -0700 3/8/2011, Bruce Johnson wrote:
On Mar 8, 2011, at 2:57 PM, michaelangelo wrote:
If I accidentially
From: Charles Lenington macso...@brightok.net
To: g3-5-list@googlegroups.com
Sent: Wednesday, 9 March, 2011 14:48:31
Subject: Re: wireless signal theft
On 3/9/11 8:34 AM, Yersinia wrote:
On 3/9/11 8:53 AM, Charles Lenington wrote:
I hope everyone with
From: John Carmonne carmo...@aol.com
To: g3-5-list@googlegroups.com
Sent: Thursday, 3 March, 2011 1:46:26
Subject: G5 PPC to Mac Pro?
Hi All
I tried to post this to the Mac Pro list but I see no life there for many
months, hopefully I don't get kicked outta
FAO Dan
(and anyone else interested)
Spark (v 3.0b9) seems happy in 10.6.6 on 2009 Mac Pro.
Spark Daemon reports as Intel in activity monitor, 0.21 CPU time, 2.9MB Private
Mem, 27.4MB Shared Mem 60.6 Virt Mem - so it's not a resource hog.
Ted
--
You received this message because you are a
Dan wrote:
I'm sitting here with only my QS running Tiger, so I can't test...
Does Spark work on Leopard? on Snow Leopard? on Lion?
http://www.shadowlab.org/Software/spark.php
Thanks!
- Dan.
Hi Dan
Just tried it on my G5 dual2.0 with 10.5.8.
Works a treat.
Thanks for making me aware
Norm Rowe wrote:
When I restart my G4 Mac it now goes to the secondary drive unless I
hold down the C key and tell it to use the main drive. How do I fix this?
Norm
System Preferences - Startup Disk
then select the one you want. Choice is stored in PRAM, so if it's
constantly forgetting,
vacputer wrote:
My Yosemite G3 300 is failing to boot. The unit's power light comes
on, the hard disk spins up, and nothing else happens. No chime, no
video.
I have tried everything I can. I have removed all SIMMs and replaced
them with the original 64MB Apple SIMM. No joy. I have pushed the
The only bad things about leaving your monitor in standby mode are:-
1) Your electricity costs will be a little higher.
2) With ANY electrical item left unattended in standby mode, there is a
slightly
increased risk of fire.
Other than those two minor points, there shouldn't be any problems.
Hi All,
Asking here as there seems to be very little activity on the MacPro
list, and I stay on this list for my G5 Dual 2,.0.
I also have an 2009 Mac Pro (bought in April 2010), and I would like to
add an optical drive with Lightscribe into the lower optical bay which
is currently empty.
From: jason yoinkma...@yahoo.com
To: G-Group g3-5-list@googlegroups.com
Sent: Thursday, 3 February, 2011 23:08:18
Subject: Re: 1.8 ghz g5 tower
A couple of things have popped up. I have the radeon 9600 card, it
starts up when I press the power button in
Jane, (Portland, OR) wrote:
On Jan 20, 1:34 pm, Tina K.penguir...@gmail.com wrote:
On 2011/01/20 19:04, Jane, (Portland, OR) so eloquently wrote:
I have heard of LogMeIn, but it looks like you have to pay for it. I
don't know how well it works, either. Can any of you recommend a
Paul Twiddy wrote:
(\0/)
/_\
On Dec 25, 2010, at 10:10 AM, Fluxstringer wrote:
Christmas cheer to all.
Laying down the hatchets for a day cannot hurt.
(\0/)
/_\
Nice.
Nice sentiment.
Thanks
Ted (in UK)
--
You received this message because you are a member of G-Group, a
Tom wrote:
Yeah, I don't know why the drivers for this rather common video card
were left out of Leopard, but obviously they were. Somebody at Apple
goofed?
Ted, are you sure it was the card that was bad, or only the driver?
I'm pretty sure it was the card, as it was OK when booted from
DLC wrote:
Quick Update;
I had my daughter reset the motherboard - so far, it worked. Still
curious about the splash screen - I can send anyone a pict if you're
at all curious yourself.
Thanks,
Dana
On Dec 18, 12:43 pm, DLCdlcatft...@frontier.com wrote:
Greetings all,
I little help in
From: Bruce Johnson john...@pharmacy.arizona.edu
To: g3-5-list@googlegroups.com
Sent: Friday, 17 December, 2010 0:23:57
Subject: Re: The Attack of the Giant Pixels
On Dec 16, 2010, at 5:07 PM, Tom wrote:
Then I took off the 23 Cinema Display and hooked up
I spent a little more on a set of Logitech Z-323, and have been
pleasantly surprised at the quality of output from a £35 purchase.
That equates to around US$55, but I'd bet they're a damn sight cheaper
in the US than in the UK.
Everything else is...
Ted
Baldassare Guzzo wrote:
Thanks. Im
Tina K. wrote:
On 2010/12/12 13:05, Wallace Adrian D'Alessio so eloquently wrote:
Several tries in different ways could not find anything with a URL of
facebook.net http://facebook.net or www.facebook.net
http://www.facebook.net.
That is strange, I rechecked Little Snitch and the connection
From: James Therrault jetas...@netzero.com
To: g3-5-list@googlegroups.com
Sent: Friday, 3 December, 2010 2:19:22
Subject: Re: Ungrateful Apple abandons older Mac service
On Dec 2, 2010, at 7:10 PM, Yersinia wrote:
On 12/2/10 7:54 PM, James Therrault
From: Tina K. penguir...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Tuesday, 30 November, 2010 0:23:15
Subject: Re: DVD, Webcam, Pix, and Images: why are they s different
On 2010/11/29 16:07, Bruce Johnson so eloquently wrote:
You left off:
The really, truly final Directors 20th
Showing you're a nice guy is nothing to apologise for.
Best
Ted (in the UK)
From: Dana Collins dlcatft...@frontier.com
To: g3-5-list@googlegroups.com
Sent: Friday, 26 November, 2010 1:37:43
Subject: Re: How should a family of five share one computer?
On
Digital Audio (G4), I
found that ADC-DVI adapters cost almost the same as upgrading to an
ATI Radeon 9000 card having simultaneous ADC and DVI output.
Ted Treen wrote:
looking for an ADC-DVI adaptor at the moment.- Hide quoted text -
- Show quoted text -
--
You received this message because
Trickster wrote:
Hi Everyone,
Have a Powermac g5, running 10.5, 7 gigs of ram, 2x1B drives. Is my
primary machine, and an upgrade just isnt in the cards at the
moment. Want to add dual monitor support, but am looking for an ADC-
DVI adaptor at the moment. Can anyone point me in the right
From: Tina K. penguir...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Monday, 8 November, 2010 7:32:38
Subject: Re: G5 Shutdown issues
On 2010/11/07 19:49, DLC so eloquently wrote:
I have two G5 towers in our lab (1.8GHz DP-late 2004 models) running
From: Tina K. penguir...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Monday, 8 November, 2010 7:32:38
Subject: Re: G5 Shutdown issues
On 2010/11/07 19:49, DLC so eloquently wrote:
I have two G5 towers in our lab (1.8GHz DP-late 2004 models) running
Gottick International wrote:
This is one of the older ones. Pre-intel.
All G5 computers are pre-intel.
Which G5 model is it?
On Nov 7, 2010, at 6:59 AM, AndersFager wrote:
I'm trying to get this iMac G5 to start from an installer disc in
order to format the new drive. And now I have a
Gottick International wrote:
OK - this drive has jumpers. As had the old one. In a iMac G5. What
about jumper settings?
On SATA drives the jumpers generally aren't used.
The old one had a jumper. ;-) And I put it in the same spot on the new
drive. Can anyone give me a definitive on this?
On Oct 31, 2010, at 2:48 PM, Tina K. wrote:
On 2010/10/31 12:03, Dan so eloquently wrote:
Nice fandom article with no real facts. *shrug*
Sorry, no OS is a must have for me. Unless it's going to make me breakfast in
the morning and then go to work for me while I shop, and clean my house
Bruce Johnson wrote:
On Oct 21, 2010, at 9:24 AM, James Therrault wrote:
Some years back, Michael Dell made an utterance to the effect, We are now in
Chapter X of computing and when Chapter Xx is written, Apple won't be in it. If
one follows stocks at all, Dell's been languishing in the
From: R 2 gpride1...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Tuesday, 19 October, 2010 4:57:07
Subject: Just purchased used g5 mac
Hello all-
I just bought a used g 5 mac! It has Leopard os, lists as 7.3? (what's this
mean) with 2 GB Ram and dual ppcs at 2.0 Ghz. Also,2 HDDs with 250
From: Heather Cotter heather.cot...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Thursday, 14 October, 2010 6:49:54
Subject: Re: VGA video card for Power Mac G3?
Out of curiosity, what IS the max RAM it can handle? I've heard up to
768MB, but some sites say
From: Dana Collins dlcatft...@frontier.com
To: g3-5-list@googlegroups.com
Cc: Dana Collins dncoll...@tayloru.edu
Sent: Monday, 11 October, 2010 3:43:13
Subject: Re: How to burn VIDEO_TS
On 10/10/10 8:21 PM, Arnel Tuazon of a.tua...@gmail.com sent
On
*From:* Ted Treen ted.tr...@btinternet.com
*To:* g3-5-list@googlegroups.com
*Sent:* Mon, October 11, 2010 12:41:33 AM
*Subject:* Re: How to burn VIDEO_TS
*From:* Dana Collins dlcatft...@frontier.com
*To:* g3-5-list
James Morgan wrote:
I bought one MDD G4, found I needed a second one, bought the
second one a couple or three months later. Thereafter I used them
both, side by side, rather heavily. So both received virtually the
same use and they are almost the same age.
I put in new battery
Paul Cefola wrote:
I have some questions regarding a Power Mac G3/266 machine. Is this
the correct group to ask the questions to?
Paul
Certainly is: Fire away.
Ted
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with
Original Message
Subject:Re: Question about Power Mac G3/266 tabletop
Date: Sun, 26 Sep 2010 16:43:36 +0100
From: Ted Treen ted.tr...@btinternet.com
Reply-To: ted.tr...@btinternet.com
To: Paul Cefola paulc...@buffalo.edu
Paul Cefola wrote:
Gents,
I
From: Arnel Tuazon a.tua...@gmail.com
To: G-List g3-5-list@googlegroups.com
Sent: Thursday, 23 September, 2010 5:31:38
Subject: RE: External Fax Modem for G5
Hey folks,
I have a late 2005 2.3GHz dual core G5. I wanted to get a fax modem for it
and was told that my only option was for an
Are they all the same model/processor speed? I think some machine
specific disks are that specific.
No, they are not tied to a machine's serial number.
Len
When I bought them they were all IMACG5 20/2.0GHZ/512/250 (Straight
off the receipt from
James Morgan wrote:
Thanks for all the replies concerning the liquid cooled g5's. They
were very helpful. I have a g5 and, turns out, it is air cooled.
However, I am thinking of buying an air cooled 2ghz g5 to replace my
1.25 ghz MDD g4. Does anyone know if I can simply take the hard drives
On Sep 3, 2010, at 3:14 AM, ainsies wrote:
G'day to all
Have recently learned that repairing permissions on Tiger takes 48
seconds, on the same machine Leopard takes 56 minutes, can anyone let
me know of the reason for tthe huge difference in times ?
I have an iMag G5, 20 inch, 2.0GB
From: John Martz zjo...@yahoo.com
To: g3-5-list@googlegroups.com
Sent: Thursday, 26 August, 2010 6:33:08
Subject: G4 with no chime but instead folder with ?
On Aug 25, 2010, at 8:33 PM, Robert Long texasche...@hotmail.com wrote:
Hello group, I got a G4 and
Gus wrote:
The Chime usually comes up pretty early in the P.O.S.T. Long before it
goes out and checks for the system. I would start to wonder if there
wasn't an audio issue You can try reseting the pram and listing
for additional chimes and see if you here them.. I would suspect that
if
From: Geke gevangaste...@googlemail.com
To: G-Group g3-5-list@googlegroups.com
Sent: Monday, 16 August, 2010 12:40:33
Subject: Re: Sawtooth replacement
I do think a MDD will last you at least two years, but you’re the only
one who can decide... Here a few thoughts:
- MDDs support harddisks
ah...clem wrote:
On Aug 12, 9:31 pm, Midnight ridercoolmar...@gmail.com wrote:
Don't ever plug in a monitor bigger than 17 in a card that is less than
32MB, because you won't like the performance at all, and it might freeze.
That used to happen to me when I had my 23 dell plugged into my
Midnight rider wrote:
dude! 256MB ATI Radeon 9650! Show me where I could get that!
--
Sent from my PM G4 Sawtooth
It's anyway, anyhow, anywhere you choose it. -Me
Can't say:- I bought this early 2005 G5 dual 2.0 about 2 years ago, and
all I've done is upped the RAM to 4GB, replaced the
Les wrote:
Hi,
I just received a PowerPC G5 1.8 DP desktop tower running OS X
10.4.11. I would like to run some old Apps like Hypercard and Final
Cut Pro 2.0 on this machine. Do I need to install OS 9? Is this possible?
Thanks
Yes,
10.4 will support OS9 classic (10.5 won't) so you'll need
pdimage wrote:
On 20/7/10 08:19, Gusgusr...@comcast.net wrote:
BUT!!! I am smart enough to know that I don't know everything. Is
there something I am missing with this G4 - G4 swap?
Thanks.
For grins, I did drop the system clock from 400.. then up to 500 No
change with the 500 mhz
Wallace Adrian D'Alessio wrote:
Metered service? Who has metered service? The UK? If that is the only
thing available that is what you go with but then why bother at all. A
phone call would be preferable. And hopefully the post office is still
around.
Most of us in the UK are on ADSL or
From: Daniel Stewart daniel.stewart...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Wednesday, 30 June, 2010 7:45:02
Subject: Re: CPU Temp?
I tried this. This app and every other one I have tried do not give
CPU temp for my Quicksilver, only HDD temp.
On
Dan wrote:
At 7:01 AM -0700 6/23/2010, John Carmonne wrote:
I have a movie that's a .mkv file 4.46 GBs I want to burn it to a
DVD but I can't get Toast 10 to see it as an image I also tried Toast
8 and 6 still no cigar. Is this spometing I can do?
An easier but probably longer way way to
Looks like new toys coming...
Ted
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at
From: Wallace Adrian D'Alessio fluxstrin...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Tuesday, 15 June, 2010 11:56:34
Subject: Re: Apple Store closed for update
On Tue, Jun 15, 2010 at 9:45 AM, Ted Treen ted.tr...@btinternet.com wrote:
Looks like
From: Wallace Adrian D'Alessio fluxstrin...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Monday, 14 June, 2010 4:45:38
Subject: Re: Will PowerPC be forever obsolete?/ RICH Text
On Sun, Jun 13, 2010 at 9:24 PM, Dennis Myhand dmyh...@suddenlink.net wrote:
Volume:MacHD
Boot Mode:Normal
Computer Name:TedsG5
User Name:Ted Treen (tedtreen)
Time since boot:26 minutes
I use Opera as my default browser:-
About Opera reports:-
*About Opera
Version information*
Version10.53
Build8343
Mark Sokolovsky wrote:
I know Apple decided to trust it's users, but the thing is, If they
only provide one license when you buy a DVD (let's say it's OS X SL),
why does it still allow you to install even though the license was
only supposed to be used once?
Pray tell me how in God's name
Find someone with an old OS9 system who also has a copy of Adobe Streamline,
import the picture, and then tidy it up in Illustrator.
(Unless you fancy loading image into Illustrator, opening a new layer, then
tracing it. Doesn't like like it would be too much of a job.
Ted
View from the UK, FWIW.
Given a choice, I'll stick with the email format. I do visit certain forums,
and participate therein; but the format of; the people belonging to; and the
education received from this list greatly exceeds the value of all the forums
put together.
Just my two
Mark Sokolovsky wrote:
I happen to also have a Graphite g3 iMac 600Mhz, so I can help here.
If the program is quitting unexpectedly, try making sure that you
aren't running too many programs at once. Also, update safari to
version 4.0.3 using the software update program in system preferences.
Stewie de Young wrote:
The Radeon 9800 series are about the best value for money.
The nvidias are faster ( 6800 and 7800s ) but also quite a bit more
expensive too.
I have a MDD with a flashed 9800XT - 256mb and while a hot running
card , it is a good performer.
If you go this route , remove
Hi All,
On my G5 Early 2005 Dual 2.0, 4GB RAM, 10.5.8, an odd message has
recently appeared in the System Log (after Startup) , viewed through
Console.
Message is repeated many times (between 6 and 20+ ish) and reads:-
Mar 21 16:29:37 TedsG5 kernel[0]: { 41 910440}
Dan wrote:
At 4:35 PM + 3/21/2010, Ted Treen wrote:
G5 Early 2005 Dual 2.0, 4GB RAM, 10.5.8
Message is repeated many times (between 6 and 20+ ish) and reads:-
Mar 21 16:29:37 TedsG5 kernel[0]: { 41 910440}
UniNEnet::restartReceiver
Is this indicative of a problem I should
John Carmonne wrote:
On Feb 19, 2010, at 6:10 AM, Ted Treen wrote:
John Carmonne wrote:
On Feb 19, 2010, at 5:45 AM, Trickster wrote:
Hey guys,
Everyone was a big help on my last post about moving a hard drive,
thank you much for everything. Wanted to get peoples opinions
From: Kris Tilford ktilfo...@cox.net
To: g3-5-list@googlegroups.com
Sent: Tuesday, 16 February, 2010 23:09:35
Subject: Re: New keyboard verses Old Tiger
On Feb 16, 2010, at 4:33 PM, Bruce Johnson wrote:
There's been firmware updates for these keyboards,
From: Stewie de Young stewies...@hotmail.com
To: g3-5-list@googlegroups.com
Sent: Monday, 1 February, 2010 23:57:05
Subject: RE: Some smarter people than I comment about Flash...
Date: Mon, 1 Feb 2010 22:55:57 +
From: ted.tr...@btinternet.com
To:
Bruce Johnson wrote:
On Jan 31, 2010, at 4:52 PM, Mark wrote:
SVG, OGG, MP4, Mozilla
Bruce Johnson wrote:
Two Johns: Gruber and Welch take on the Flash issue, both germane to
discussions we've had here recently regarding crappy online video...
OMG WTF??!! YGAC, ROFL
YGAC???
From: Kasey Smith kasm...@gmail.com
To: g3-5-list@googlegroups.com
Sent: Friday, 22 January, 2010 13:40:55
Subject: Re: shut down pop-up
On Jan 22, 2010, at 6:39 AM, Bill Connelly wrote:
On Jan 21, 2010, at 4:56 PM, Bill Connelly wrote:
On Jan 21,
Sorry, I came late to this thread.
Original question - Why are you (still) using PowerPC-based Macs?
Multiple answer(s):
1) Wife won't let me buy a Mac Pro - she thinks things like housing, food etc
are a priority.
2) Even if wife were in agreement with idea, bank manager wouldn't be.
3)
Jonas Lopez wrote:
System: G4 tower with X= 10.4 and 10.2 and 9 for that matter.
Decided to run using safe mode by using Apple+S at start up.
At command line after the # entered /sbin/fsck -y ran just fine in 10.4 but had
this problem in 10.2:
.
.
Checking Extended Attributes file
Invalid
Bruce Johnson wrote:
On Jan 11, 2010, at 9:24 AM, Dan wrote:
Data is like gas. It expands to fill all available space! YA! If
there's room, I try to fill it! heh. A proper carrier is best, but
in a pinch -- I use cardboard separators between the drives, to
create an air flow gap, and
Clark Martin wrote:
Hal wrote:
Hi all.
I'm new to the group, but have been a member of some of the other LEM
groups for a while.
I've been having a problem with my G5 Quad that I hope I can get some
insight on.
It's running 10.5.8, though this problem has been consistent across OS
Jorge Quiroz wrote:
Ok, your mac can go up to 10.4, but you'll need a retail disk (not an
specific machine disk)
you can put any standard IDE DVD ROM in your Power Mac( mine has a LG
SuperMulti DVD Burner with dual layer support), you can get a WiFi PCI
Card to connect to wifi networks,
glen wrote:
- Original Message
From: Cliff Redigerredicl...@yahoo.com
ject: Photo printing problem ?
MiniG4
Tiger 10.4.11
Epson Artisan50
Adobe InDesign CS2
I recently purchased an Artisan50 Epson color printer,
Designed some holiday cards in InDesign
yersi...@cybernex.net wrote:
Hi Listers,
Google was unable to help me find an OLDER version of Onyx. I need one
to run on my G4 Mac Mini, which is and needs to stay on 10.4.2. The
earliest Onyx I was able to find for Tiger required 10.4.3 minimum. I
have Onyx 1.7.5 running on my Quicksilver,
I believe you'll find Tiger somewhat more responsive, but do watch for S/W
(apps/utilities) requirements etc.
Enjoy it
Ted
--- On Mon, 7/12/09, mythmaker18 mythmake...@yahoo.com wrote:
From: mythmaker18 mythmake...@yahoo.com
Subject: Leopard or Tiger?
To: G-Group g3-5-list@googlegroups.com
Bruce Johnson wrote:
snip
That is a joystick.
Yes.
A joystick ON a mouse.
Even Dr. Moreau would declare this an experiment too far.
ROFLMAO
Thanks Bruce, your last sentence really brightened a dull day...
(I'm stuck at home getting over swine flu but still tele-working...)
Keep the
iJohn wrote:
On Wed, Nov 25, 2009 at 11:34 PM, Kasey Smithkasm...@gmail.com wrote:
I would go with the 7200RPM, going from a 5400 to a 7200 even with an
IDE drive is a big difference.
It used to make a bigger difference than it does now with the newer,
higher bit density
Hi All,
I have an early 2005 G5 dual 2.0, maxed out at 4GB RAM. I want to put
some huge drives in it, and am looking at Samsung F3 1TB 7200rpm drives.
There are places (in the UK) where I can get the Samsung F2 1.5TB drive
for not a lot more, although it's only a 5400rpm drive.
I'd be
Bruce Johnson wrote:
On Nov 15, 2009, at 8:50 AM, Charles Lenington wrote:
Is anyone else getting the acknowledgement message for all messages
that
nestami...@gmail.com
sends to the list?
I have not been getting these, so it's not everyone.
Ive been getting them in the
--~--~-~--~~~---~--~~
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide
Hey Ralph,
Right click??? Are you using a PC??? How do you right click on an Apple
computer??? What you are talking about here sounds really great!!! But I can't
right click... CoolKat
Kat,
(Or can I call you Cool?)
Use any old PC USB mouse you can assign the right-hand button
Hi All,Has anyone any knowledge if there's any restriction of disk capacity for Early 2005 G5 Dual 2GHz towers?TIATed
Alexander MacLeod wrote:
On Thu, Sep 24, 2009 at 10:52 AM, Ted Treen ted.tr...@btinternet.com wrote:
Hi All,
Has anyone any knowledge if there's any restriction of disk capacity for
Early 2005 G5 Dual 2GHz towers?
TIA
Ted
None at all. My first generation PowerMac G5 has
From: Swigart, Kurt A [NTK] kurt.a.swig...@sprint.com
Subject: Question regarding non-mac monitors/display
Hello,
Quick question, request for advice. I was wondering what are some of the pros
and cons and/or pieces ( cables/etc…) that I would need to
From: d p xolmu...@gmail.com
To: G3-5 List g3-5-list@googlegroups.com
Sent: Wednesday, 26 August, 2009 9:27:55 AM
Subject: Re: Apple G4 CPU upgrade options
Does nayone have any experience between these two:
1. Mercury Extreme G4/1.2GHz w/2MB L3 Cache. (I'm
Hi All,
Possibly OT - in which case I humbly apologise to the Nannies, but I use CS3,
and have a .swf (and its .fla) which I am trying to convert to .flv.
Flash CS3 doesn't seem to have an export to .flv - or if it does, I
can't find it in the program or in Flash Help.
Any Flash-experienced
Out now.
Ted
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs.
The list FAQ is at
Lodewijk wrote:
I bought a Sonnet Tech Encore ZIF G4 Processor Upgrade Card for my
Power Mac G3, but it (the power mac) crashed. I'm planning to buy a
Power Mac G4 AGP graphics to replace my old G3. My question is: does
my Sonnet Card work with this computer?
In a word, no.
The G4 does
t was true back then. Problem was all the old 68k code in the old
MacOS. Back in '98 a mac with Linux felt like flying compared to the
macos crawling.
The argument had absolutely nothing to do with the OS running on the
system. The industry comparisons between RISC and CISC were made on
1 - 100 of 145 matches
Mail list logo