Re: [AFMUG] Laptop Keyboards

That's the keyboard I still type on! On Wed, Apr 4, 2018 at 1:38 PM, Dave wrote: > +1 > I used to clean and restore the old IBM selectric's .. So yes keyboard is > by preference. > > > On 04/04/2018 01:19 PM, Bill Prince wrote: > > Yes. You HAVE to touch it. Keyboards are

Re: [AFMUG] OT Raspberry PI

Your other option would be to find a way to setup an internal DMA controller to trigger off of an external input. From your clock source, you would trigger individual DMAs from a static buffer to GPIO connected to some sort of circuit to invert the Mark bits. The DMA controller would loop over the

Re: [AFMUG] OT Raspberry PI

This calls out for an FPGA solution. On Thu, Feb 22, 2018 at 10:45 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote: > You can get a fpga board which might be suitable for this project (after > adding appropriate clocks) for around $20 anymore. One example: >

Re: [AFMUG] AF24 link that won't pass an RFC2544 test at 500 Mbps

You could try turning off inband mangement if you have not already done so. On Mon, Jan 15, 2018 at 11:27 AM, Eric Kuhnke wrote: > Same results for sequence errors either with or without flow control > enabled on the radios, and switch ports that connect to them. > > > >

Re: [AFMUG] Older AF5 from first productions runs (not AF5X) 24VDC?

AF5 and AF5U units always shipped with 50V PoE blocks. The issue to which you refer was AF5X only. Chuck On Mon, Dec 4, 2017 at 12:06 PM, Mathew Howard wrote: > No, as far as I know all Integrated AF5 are 48v only (I'm pretty sure they > won't even run on 24v). > > On

Re: [AFMUG] Powering an Airfiber 5x

If your mac address is in the range 04:18:d6:e3:00:00 to 04:18:d6:e3:08:e9 you are 24 volt only. All others are 48 volt enabled. Chuck On Fri, Nov 17, 2017 at 11:22 AM, Adair Winter wrote: > unless they have been sitting on the shelf for two years, It shouldn't be

Re: [AFMUG] Ben Moore, ubnt, fix your documentation of basic things!

Hi, Just to be official about is, all airFIber radios support transport of Jumbo packets sizes of 9000+ bytes. The currently supported packet size is 9600. There is no configuration required - they just do it. I am an Ubiquiti employee :) Chuck On Thu, Sep 28, 2017 at 3:35 PM, Josh Reynolds

Re: [AFMUG] Back to the original list meaning LOL

+1 On Sun, Jul 9, 2017 at 2:47 PM, Craig House wrote: > https://youtu.be/ITKfr1qOZ0w >

Re: [AFMUG] the solution

; I guess Chuck Macenski was the first to point out my error. > > *From:* ch...@wbmfg.com > *Sent:* Friday, March 10, 2017 9:47 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] the solution > > Ok due to brain fart yesterday, everything was wrong. Voltage drop does *not >

Re: [AFMUG] Fw: the solution

Ok, doing software apparently has erased some important stuff from my brain. Hard to know what else I lost. Having said that, why is Vr = I**2 * R? Wouldn't Vr = I * R? On Thu, Mar 9, 2017 at 9:59 PM, Chuck McCown wrote: > > As you can see, I actually arrived at the solution

Re: [AFMUG] Ohms law

Your not going to derive it for us? On Thu, Mar 9, 2017 at 9:50 PM, Chuck McCown wrote: > I should say, the current is the third root. > > *From:* Chuck McCown > *Sent:* Thursday, March 09, 2017 8:46 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Ohms law > > The solution is

Re: [AFMUG] Wispapalooza highlights

We are the fine bottle of wine, right? On Thu, Oct 13, 2016 at 11:03 PM, Ken Hohhof wrote: > Why would you choose those radios to use with $6600 worth of dishes. > That seems like opening an expensive bottle of wine to drink with a peanut > butter and jelly sandwich. > > > > >

Re: [AFMUG] airFiber error correction

That should read does not do DSCP Darn keyboard errors... On Sat, Sep 10, 2016 at 2:22 PM, Chuck Macenski <ch...@macenski.com> wrote: > AirFiber prioritizes traffic based on the 802.1 VLAN tag priority bits. > Each of the priorities is sorted into unique MAC queues with

Re: [AFMUG] airFiber error correction

AirFiber prioritizes traffic based on the 802.1 VLAN tag priority bits. Each of the priorities is sorted into unique MAC queues with the highest priority queues supplying data first to the over-the-air multiplexed data stream. That stream is then sent using a selective repeat ARQ mechanism - the

Re: [AFMUG] UBNT AF-2X Problems... Where Do You Go For Help?

Who ya gonna call? Call AFMUG!!! Hit me offlist at ch...@ubnt.com and we will get you a software update. Seems the software rules surrounding lower gain antennas are in error. We should be able to put a fix together early next week. Out of curiosity, did you post anything on the ubnt.com

Re: [AFMUG] UBNT CPE being used for Abusive actions?

acenski’s email address all of a > > sudden was a Mimosa domain > > > > From: Chuck Macenski > > Sent: Thursday, May 05, 2016 12:36 PM > > To: af@afmug.com > > Subject: Re: [AFMUG] UBNT CPE being used for Abusive actions? > > > > I don't mean to be

Re: [AFMUG] UBNT CPE being used for Abusive actions?

on it. > > On Thu, May 5, 2016 at 11:17 AM, Chuck Macenski <ch...@macenski.com> > wrote: > >> I hate it when people lump airFiber into these things. I know of no >> security holes in airFiber that don't require you to already be logged into >> the unit (where y

Re: [AFMUG] UBNT CPE being used for Abusive actions?

m> > *Sent:* Thursday, May 05, 2016 10:53 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] UBNT CPE being used for Abusive actions? > > Chuck M will come to your house and put legos in all your shoes if you > badmouth the airfiber :-) > > On Thu, May 5, 2016 at 10:17 AM, Chu

Re: [AFMUG] UBNT CPE being used for Abusive actions?

I hate it when people lump airFiber into these things. I know of no security holes in airFiber that don't require you to already be logged into the unit (where you can change the configuration until your heart's content). AirFiber also supports a very simple to configure management VLAN (I don't

Re: [AFMUG] [OT] [POLITICAL DATA] The rise of partisanship in the US House 1949-2011

I do not believe that is a coincidence. On Thu, Mar 31, 2016 at 2:11 PM, Josh Reynolds wrote: > Interesting note about 1983.. that year marked the start of real > partisan tv news networks. > > On Thu, Mar 31, 2016 at 2:10 PM, Jeff Broadwick - Lists >

Re: [AFMUG] OT Apple

WIthout taking a public position one way or the other, this need to be settled in the courts so that we all have some idea of what rights we do or do not have; we should not be required to guess about what the government can and can't do; if we can't be trusted to know what the government can do,

Re: [AFMUG] Airfiber Management Priority?

Hi, Actually, airFiber does prioritize packets based on 802.1p (VLAN header priority). If you aren't using this, then, everything is at the same prioirity. Chuck On Fri, Feb 12, 2016 at 11:46 AM, Josh Reynolds wrote: > This is very very wrong. > > AirFiber does not

Re: [AFMUG] Airfiber Management Priority?

the management IP of the radio on the other side of the link as > well, correct? > > > > > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck Macenski > *Sent:* Friday, February 12, 2016 11:13 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Airfibe

Re: [AFMUG] Airfiber Management Priority?

<geo...@cbcast.com> wrote: > What about DiffServ? I suppose priority really only comes into play when > the link is near saturation. Probably overkill on the AF24. However, DSCP > based QoS would be useful on the AF5 and AF-X > > On 2/12/2016 12:12 PM, Chuck Macenski wrote:

Re: [AFMUG] To strong of a signal?

I would vote for -50 On Wed, Dec 9, 2015 at 3:34 PM, John Babineaux wrote: > Thanks everyone for the info!!! > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *That One Guy > /sarcasm > *Sent:* Wednesday, December 09, 2015 3:21 PM > *To:* af@afmug.com

Re: [AFMUG] OT Ebay

Member since: Feb-13-98 On Sun, Nov 29, 2015 at 3:09 PM, Chuck McCown wrote: > Member since: Dec 23, 2000 > > Who has the oldest ebay account? >

Re: [AFMUG] OT - Extend POTS via IP

Ugh... On Nov 10, 2015 2:17 PM, "Chuck McCown" wrote: > The importance of the NID and ground rod: > > A Kansas farm wife called the local phone company to report her > telephone failed to ring when her friends called and that on the few > occasions, when it did ring, her dog

Re: [AFMUG] Fw: important message

AOL of course! On Wed, Oct 14, 2015 at 4:45 PM, Bruce Robertson wrote: > So how does spam get into this list? > > On 10/14/2015 12:12 PM, Af wrote: > > Hello! > > � > > *Important message, please read* http://immugen.com/until.php > > > �

Re: [AFMUG] AirFiber 5x Frequencies

> > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck Macenski > *Sent:* Tuesday, October 13, 2015 2:49 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] AirFiber 5x Frequencies > > > > Hi, > > > > Yes, those are only intended for DFS fallback

Re: [AFMUG] AirFiber 5x Frequencies

Hi, Yes, those are only intended for DFS fallback at the moment. If you are not using DFS frequencies, you can select the split frequency mode and freq 2 and 3 will be replaced by an rx and tx frequency selection. The scanning algorithm has a number of changes coming in future releases so stay

Re: [AFMUG] Amazon bans Apple TV and Chromecast

As big as Amazon is, aren't they using their dominant market position to suppress competition? When I was at Motorola, they used to teach us to be very careful about that as it might violate anti-trust laws. On Sun, Oct 4, 2015 at 5:38 PM, Keefe John wrote: > It is a free

Re: [AFMUG] Don't Update Chrome

OH 45373 > > On Sat, Sep 5, 2015 at 11:34 AM, Chuck McCown <ch...@wbmfg.com> wrote: > >> God Bless You! >> >> *From:* Chuck Macenski <ch...@macenski.com> >> *Sent:* Saturday, September 05, 2015 9:16 AM >> *To:* af@afmug.com >> *Subject:*

Re: [AFMUG] Don't Update Chrome

Hi, We are working to get rid of Java as quickly as we can. At the time airView was written (before my time here), it was really the only practical choice for cross-browser integration. Chuck On Sat, Sep 5, 2015 at 9:11 AM, Ken Hohhof wrote: > It’s not like any radio

Re: [AFMUG] worthless Zuckerberg post about lasers from the sky

Aren't airplanes allergic to lasers? On Thu, Jul 2, 2015 at 11:15 AM, Ken Hohhof af...@kwisp.com wrote: It would make more sense if the lasers are between balloons/drones, not to earth stations (and certainly not to end users). One would also think if communications drones are the next big

Re: [AFMUG] worthless Zuckerberg post about lasers from the sky

:09 PM, Bill Prince part15...@gmail.com wrote: Airplanes probably don't care much one way or the other. Ask a pilot though... bp part15sbs{at}gmail{dot}com On 7/2/2015 2:06 PM, Chuck Macenski wrote: Aren't airplanes allergic to lasers? On Thu, Jul 2, 2015 at 11:15 AM, Ken Hohhof af

Re: [AFMUG] AirFiber24HD MIB

Hi, It is here: https://www.ubnt.com/downloads/firmwares/airfiber/v2.2/UBNT-MIB.txt To find it on the web page, you need to click on a specific code release for AF24-HD (as if you want to download the .bin file). That will expand the code download section which includes a link to the MIB file

Re: [AFMUG] test

I didn't see it On Fri, Jun 19, 2015 at 3:05 PM, t...@nwohiobb.com wrote: test can anybody see the email?

Re: [AFMUG] SAF: Daniel White Resignation Letter

I think we all need to watch the movie Primer on Netflix to better understand all of the trade offs regarding time travel. It is more complicated than it appears. On Mon, Jun 15, 2015 at 1:06 PM, Bill Prince part15...@gmail.com wrote: You can always come back and feed key information to your

Re: [AFMUG] SAF: Daniel White Resignation Letter

Hey, that sounds a lot like corporate speak for I am late for a meeting :) On Mon, Jun 15, 2015 at 2:14 PM, Bill Prince part15...@gmail.com wrote: I love temporal anomalies. bp part15sbs{at}gmail{dot}com On 6/15/2015 12:13 PM, Mathew Howard wrote: only if you give it to yourself before

Re: [AFMUG] AF5 vs AF5X

The Rx and Tx Channel ranges are the same Chuck On Mon, May 4, 2015 at 10:47 PM, Jon Langeler jon-ispli...@michwave.net wrote: In Ubiquiti's version of FDD, is it different channel range for the Rx? The risk there is anyone else sees that channel as clear. Sent from my iPhone On May

Re: [AFMUG] AF5 vs AF5X

mode, given that it is using separate antennas rather than a diplexer. *From:* Chuck Macenski ch...@macenski.com *Sent:* Tuesday, May 05, 2015 9:49 AM *To:* af@afmug.com *Subject:* Re: [AFMUG] AF5 vs AF5X The Rx and Tx Channel ranges are the same Chuck On Mon, May 4, 2015 at 10:47

Re: [AFMUG] AirFiber drop ethernet on minimum modulation

Hi, We ARE doing that for a near term release - we plan to use the capacity numbers and it works across all airFiber units. If you want feature additions for airFiber, I suggest you post them on the airFiber forum on the Ubiquiti website. Chuck On Mon, May 4, 2015 at 12:49 PM, Shayne Lebrun

Re: [AFMUG] AirFiber drop ethernet on minimum modulation

True enough... On Mon, May 4, 2015 at 1:20 PM, Chuck McCown ch...@wbmfg.com wrote: Yeahbut this is the official place to hang out... *From:* Chuck Macenski ch...@macenski.com *Sent:* Monday, May 04, 2015 12:04 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] AirFiber drop ethernet

Re: [AFMUG] AirFiber drop ethernet on minimum modulation

For which radio; AF24? On Mon, May 4, 2015 at 1:50 PM, Shayne Lebrun sleb...@muskoka.com wrote: Any timeframe on that? As an aside, that response was from an email to supp...@ubnt.com. *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck Macenski *Sent:* Monday, May 4, 2015 2

Re: [AFMUG] UBNT AF5X snmpwalk?

Yup Sent from my Moto X Gen 2 On Apr 7, 2015 7:47 PM, Josh Reynolds j...@spitwspots.com wrote: There is an AF MIB on the ubnt download page... On 04/07/2015 04:43 PM, e...@kuhnke-international.com wrote: Ben, Chuck, do you guys have a numeric snmpwalk of an af5x live link you could copy

Re: [AFMUG] airFiber 5X POE voltage range

a DC-DC converter to ensure that sensitive equipment does not let the smoke out (UBNT is on my shit list as being mostly sensitive). I like keeping my POPs simple, but I also do not like to let the smoke out. bp part15sbs{at}gmail{dot}com On 3/22/2015 11:53 AM, Chuck Macenski wrote: Hi

Re: [AFMUG] Force 110 Issue

fiber? On Tue, Mar 24, 2015 at 4:24 PM, Colin Stanners cstann...@gmail.com wrote: Ubiquiti product name generator: [air / nano / pico / power / rocket][fiber / beam / bridge / grid / station / dish / MAX] airbeam airbridge airgrid airstation airdish nanofiber nanogrid nanodish

Re: [AFMUG] airFiber 5X POE voltage range (was: splain the AC ubnt line)

Hi, I do not know the voltage spec off the top of my head; we really only support the included 24V PoE. I do know that 48V is too high and will not work. At 24V, I believe the power draw is under 15 Watts; that consumption goes up if the supplied voltage drops significantly below 24V. Chuck On

Re: [AFMUG] More ePMP gripes

argh... On Wed, Mar 18, 2015 at 1:07 PM, Chuck McCown ch...@wbmfg.com wrote: Code writers live in their cube, fed pizza all night, no families, no bathing. What personal life? *From:* Adam Moffett dmmoff...@gmail.com *Sent:* Wednesday, March 18, 2015 12:03 PM *To:* af@afmug.com

Re: [AFMUG] Angry landlord over Roof mount antenna

I am not a lawyer and have never played one on TV. This is just a question. If I hire someone to cut down a tree, I would seem to be implicitly saying to the cutter that I have the right to ask them to cut the tree down. If they cut the tree down but don't have permission of the owner, it would

Re: [AFMUG] Nanobeam still no DFS?

AirFiber 5X can use U-NII-1. I don't know the rest of the line well enough to add any others to the list Chuck On Sun, Mar 15, 2015 at 3:24 PM, Ken Hohhof af...@kwisp.com wrote: Thanks for the clarification. So right now if I want to operate in U-NII-2 or 3, it’s NS5M Loco or

Re: [AFMUG] quick Air Fiber 5X question

On Thu, Mar 12, 2015 at 5:13 PM, Chuck Macenski ch...@macenski.com wrote: Hi, There are no plans for airFiber dynamic framing at the moment. It could be done if you didn't care about having multiple units synced together (as the framing would be changing). I don't know how much more in one

Re: [AFMUG] quick Air Fiber 5X question

... Is there a need for this? Chuck On Thu, Mar 12, 2015 at 3:28 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Will there be? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Mar 12, 2015 at 4:23 PM, Chuck Macenski ch...@macenski.com wrote

Re: [AFMUG] quick Air Fiber 5X question

Hi, No. Currently we support 50/50, 75/25, and 67/33 (either master to slave or slave to master). Chuck On Thu, Mar 12, 2015 at 3:04 PM, Kurt Fankhauser li...@wavelinc.com wrote: I'm talking half duplex, sorry. Kurt Fankhauser Wavelinc Communications P.O. Box 126 Bucyrus, OH 44820

Re: [AFMUG] A note on ePMP 2.4 PTP mode

Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 11, 2015 9:21 PM, Chuck Macenski ch...@macenski.com wrote: You know you want one! All airFiber 5X radios come with GPS sync (we even include a GPS antenna and mount in the box). Chuck On Wed

Re: [AFMUG] A note on ePMP 2.4 PTP mode

You know you want one! All airFiber 5X radios come with GPS sync (we even include a GPS antenna and mount in the box). Chuck On Wed, Mar 11, 2015 at 7:50 PM, George Skorup (Cyber Broadcasting) geo...@cbcast.com wrote: The only reason to use it right now is because of the GigE interface and

Re: [AFMUG] UBNT OET action

Yeah, but we are able to get some pretty AWESOME Grizzlies seats :) On Fri, Mar 6, 2015 at 12:59 PM, Mathew Howard mhoward...@gmail.com wrote: I think Chuck's time is better spent making good stuff. :P On Fri, Mar 6, 2015 at 12:20 PM, Rory Conaway r...@triadwireless.net wrote: So the AF5X

Re: [AFMUG] still reading....ya'll may have posted this already

Seems a bit ironic given Verizon is the party most responsible for all of this mess... Chuck On Thu, Feb 26, 2015 at 10:35 PM, CBB - Jay Fuller par...@cyberbroadband.net wrote: but just hitting facebook (not the dress) verizon replies to fcc. ... ... in MORESE CODE.. lol

Re: [AFMUG] Air fiber lockup

-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Feb 25, 2015 10:38 PM, Chuck Macenski ch...@macenski.com wrote: Hi, I don't really have enough details to help here yet. We do not see lock-ups...if that is what is happening, I would like to know about it. Chuck On Wed, Feb 25, 2015

Re: [AFMUG] Mimosa B5 with DFS

Hi, According to my handy dandy link calculator, with a single 40 MHz channel at 5490 and an EIRP of about 26dBm, you would expect ACTUAL DATA THROUGHPUT of just over 300 Mbits/Sec using an AF5 or AF5X. Chuck On Thu, Feb 26, 2015 at 9:46 AM, Rory Conaway r...@triadwireless.net wrote: I

Re: [AFMUG] Air fiber lockup

Hi, I am confused...do you have any problem with airFiber radios? Chuck On Wed, Feb 25, 2015 at 9:19 PM, Brett A Mansfield br...@silverlakeinternet.com wrote: Thanks guys. I'll check the voltage and if it's good I won't worry about it. I only two links of af24's, so I doubt I'll see this

Re: [AFMUG] Air fiber lockup

Hi, I don't really have enough details to help here yet. We do not see lock-ups...if that is what is happening, I would like to know about it. Chuck On Wed, Feb 25, 2015 at 10:15 PM, Jaime Solorza losguyswirel...@gmail.com wrote: Sounds like line conditioning might make sense for Air Fibers?

Re: [AFMUG] airfiber 24 collocation

You should not have any problems with that. Chuck On Thu, Feb 19, 2015 at 9:51 PM, Andreas Wiatowski andr...@silowireless.com wrote: We are deploying our first ever Af24 on a water tower. We will be aiming due north…. There is an AF24 about 10ft away aimed east. Will we have any

Re: [AFMUG] There goes the neighborhood, right?

I can quit whenever I want. I just don't want to :) On Thu, Feb 19, 2015 at 8:50 PM, Tyler Treat tyler.tr...@cornbelttech.com wrote: True story. ___ Mangled by my iPhone. ___ Tyler Treat Corn Belt Technologies, Inc.

Re: [AFMUG] AF-X + Beehive

The Dishes or airFiber X? On Thu, Feb 5, 2015 at 10:40 AM, Jaime Solorza losguyswirel...@gmail.com wrote: So those who beta tested these can you chime in? Are they shipping and who has stock? Thx Jaime Solorza On Feb 4, 2015 5:26 PM, Nate Burke n...@blastcomm.com wrote: When can we see

Re: [AFMUG] FW: Introducing airFiber X

showtime? On Tue, Feb 3, 2015 at 9:48 PM, Chuck Macenski ch...@macenski.com wrote: Hi, Catch-up with me tomorrow at Animal Farm and I will tell you all about it :) Chuck On Tue, Feb 3, 2015 at 8:59 PM, Mathew Howard mhoward...@gmail.com wrote: No fair... I missed out on the leakrd

Re: [AFMUG] Af5

radios or are their noise floor estimates be different since they are different chipsets? -Ty On Tue, Jan 13, 2015 at 9:06 AM, Chuck Macenski ch...@macenski.com wrote: Hi, I should learn to sleep at night and email during the day. The tl;dr should have read: Sensitivity for a Modulation

Re: [AFMUG] Af5

floor )-Sensitivity So, every dB of noise floor == 2dB of RX signal. Have I got this right Chuck? *From:* Chuck Macenski ch...@macenski.com *Sent:* Monday, January 12, 2015 11:25 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] Af5 tl;dr...the natural noise floor for the band minus

Re: [AFMUG] Af5

The clean noise floor number is the thermal noise floor... On Tue, Jan 13, 2015 at 9:06 AM, Chuck Macenski ch...@macenski.com wrote: Hi, I should learn to sleep at night and email during the day. The tl;dr should have read: Sensitivity for a Modulation Rate at a given bandwidth (from

Re: [AFMUG] Af5

Hi, I believe the number you are looking for is the sensitivity per modulation rate minus the base noise floor for a given bandwidth (see Matt's earlier post). This gives you the required signal over the noise floor. If the noise floor goes up, the effective sensitivity goes up accordingly. What

Re: [AFMUG] Af5

are on a 50MHz Channel BW with a signal of -58 you need a noise floor of -97 to maintain 1024QAM. So, if the noise floor is -75 we are 22db off so you can add that to -58 and figure -80, or QPSK. Is this the correct math? On Mon, Jan 12, 2015 at 8:44 PM, Chuck Macenski ch...@macenski.com wrote: Hi

Re: [AFMUG] Af5

1024QAM. So, if the noise floor is -75 we are 22db off so you can add that to -58 and figure -80, or QPSK. Is this the correct math? On Mon, Jan 12, 2015 at 8:44 PM, Chuck Macenski ch...@macenski.com wrote: Hi, I believe the number you are looking for is the sensitivity per modulation

Re: [AFMUG] double emails

Maybe you need to turn off local echo? JJuusstt aa tthhoouugghhtt.. On Tue, Jan 6, 2015 at 5:36 PM, Ken Hohhof af...@kwisp.com wrote: Not me. You must be special. *From:* Erich Kaiser er...@northcentraltower.com *Sent:* Tuesday, January 06, 2015 4:57 PM *To:* af@afmug.com

Re: [AFMUG] OT: The Interview to be shown here...

You hit the nail on the head; the price of oil coupled with government spending...budget deficit verses surplus. http://www.economist.com/blogs/graphicdetail/2014/10/daily-chart-7 Chuck On Wed, Dec 24, 2014 at 10:20 AM, Ken Hohhof via Af af@afmug.com wrote: It’s also an economics lesson for

Re: [AFMUG] For Cambium

Why not Zoidburg (airFiber)? On Mon, Nov 24, 2014 at 1:24 PM, Sean Heskett via Af af@afmug.com wrote: i would go licensed gear from SAF (or your favorite licensed PTP vendor). we keep all the unlicensed bands available for PMP...we use licensed for PTP. the difference between a wifi

Re: [AFMUG] For Cambium

uh Zoidberg that is... On Mon, Nov 24, 2014 at 2:28 PM, Chuck Macenski via Af af@afmug.com wrote: Why not Zoidburg (airFiber)? On Mon, Nov 24, 2014 at 1:24 PM, Sean Heskett via Af af@afmug.com wrote: i would go licensed gear from SAF (or your favorite licensed PTP vendor). we keep all

Re: [AFMUG] For Cambium

in some applications where an AF24 won't reach far enough (8-9km and 99.999% max modulation over one year). On Mon, Nov 24, 2014 at 12:28 PM, Chuck Macenski via Af af@afmug.com wrote: Why not Zoidburg (airFiber)? On Mon, Nov 24, 2014 at 1:24 PM, Sean Heskett via Af af@afmug.com wrote: i

Re: [AFMUG] AF5/24 errors

You also have issues when connected to Microtik? On Fri, Nov 7, 2014 at 9:58 AM, Bill Prince via Af af@afmug.com wrote: Same thing happens on version 1.5. bp On 11/6/2014 2:59 PM, George Skorup (Cyber Broadcasting) via Af wrote: Found this interesting. I have some AF24's on 2.0 and AF5's

Re: [AFMUG] AF5/24 errors

@SkylineBroadbandService On 11/7/2014 8:44 AM, Chuck Macenski via Af wrote: You also have issues when connected to Microtik? On Fri, Nov 7, 2014 at 9:58 AM, Bill Prince via Af af@afmug.com wrote: Same thing happens on version 1.5. bp On 11/6/2014 2:59 PM, George Skorup (Cyber Broadcasting

Re: [AFMUG] AF5/24 errors

It was just a question... On Thu, Nov 6, 2014 at 9:08 PM, timothy steele via Af af@afmug.com wrote: Is there a bug with microtik switches? — Sent from Mailbox https://www.dropbox.com/mailbox On Thu, Nov 6, 2014 at 5:59 PM, George Skorup (Cyber Broadcasting) via Af af@afmug.com wrote:

Re: [AFMUG] Wifi for large houses

Smart meters certainly can shut you off remotely. That is a huge safety benefit to the power companies - it turns out that turning the power off to a customer that has not paid their bill is not always a pleasant experience. Chuck On Wed, Nov 5, 2014 at 11:18 AM, Ken Hohhof via Af af@afmug.com

Re: [AFMUG] Wifi for large houses

On Wed, Nov 5, 2014 at 11:37 AM, Chuck Macenski via Af af@afmug.com wrote: Smart meters certainly can shut you off remotely. That is a huge safety benefit to the power companies - it turns out that turning the power off to a customer that has not paid their bill is not always a pleasant

Re: [AFMUG] questions about filters

Hi, There are many questions (explicit and implicit) in your question. Focusing on the tx side only (since we are talking about band edge), the filters you are talking about are electromechanical. Do a wikipedia search on SAW filters and you will get a sense for what you are dealing with. There

Re: [AFMUG] questions about filters

Hi again, Another factor that causes expense is the linearity of the final stage output amplifiers...these puppies are linear for most modern radios and more linearity = more cost and higher power consumption. I will stop now... Chuck On Sun, Oct 26, 2014 at 10:47 AM, Chuck Macenski ch

Re: [AFMUG] Holy Grail

Actually...CDMA techniques (PN modulation) re-channel a band based on time rather than frequency. In a multi point environment, this allows multiple people to share a frequency bandwidth in a not terribly inefficient way when all of the simultaneous communication paths are considered. On Sat, Oct

Re: [AFMUG] Holy Grail

this what ATT is pushing in commercial about Picocells? Jaime Solorza On Oct 25, 2014 2:43 PM, Chuck Macenski via Af af@afmug.com wrote: Actually...CDMA techniques (PN modulation) re-channel a band based on time rather than frequency. In a multi point environment, this allows multiple people