Re: [Bacula-users] VirtualFull and correct volume management...

On 5/9/24 10:02, Marco Gaiarin wrote: I've setup some backup jobs for some (mostly windows) client computer; i mean 'client' as 'not always on'. ... 2) There's some way i can get the 'jobs in volume X'? I can query jobs for volume, but i've not found a way to query volumes for jobs I use

Re: [Bacula-users] advice about tape drives

Why not migrate the LTO-2 volumes to disk, then install whatever version of tape drive you wish and migrate the disk volumes to the new LTO tapes? On 4/22/24 11:29, Gary R. Schmidt wrote: On 23/04/2024 00:58, Alan Polinsky wrote: I have used Bacula for many years, since version 5. In the

Re: [Bacula-users] Any suggestions for fail2ban jail for Bacula Director ?

Nothing against fail2ban, which is quite good at mitigating brute force and dictionary attacks against password protection, but for opening Dir to the public internet, I would most definitely suggest looking into using TLS certificates issued by your own private CA instead. On 4/2/24 19:05,

Re: [Bacula-users] Again vchanger and volumes in error...

I have found the problem. See below. On 4/2/24 05:33, Marco Gaiarin wrote: Mandi! Josh Fisher via Bacula-users In chel di` si favelave... This is the Easter weekend in italy, so backup will fail in most of my sites; i'm enabling debug for sites, i'll come back here on monday... When

Re: [Bacula-users] Again vchanger and volumes in error...

On 3/28/24 09:30, Marco Gaiarin wrote: I can't explain that, unless the volumes that are in changer, those assigned to a slot > 0, are not getting their current slot set to zero when the magazine is ejected. Exactly. This is the Easter weekend in italy, so backup will fail in most of my

Re: [Bacula-users] Again vchanger and volumes in error...

On 3/21/24 16:36, Marco Gaiarin wrote: Mandi! Josh Fisher via Bacula-users In chel di` si favelave... 'Log Level = LOG_DEBUG' in the vchanger.conf file. That will log everything 'log level = 7', do you mean, right? Yes. The configuration parser will also understand "LOG_DEBUG&q

Re: [Bacula-users] Again vchanger and volumes in error...

On 3/19/24 08:31, Marco Gaiarin wrote: Mandi! Josh Fisher via Bacula-users In chel di` si favelave... This Looks like the volume is marked as being in a slot in the bacula catalog, but the RDX cartridge containing that volume is not actually mounted. This can happen if a cartridge

Re: [Bacula-users] Again vchanger and volumes in error...

On 3/18/24 14:36, Bill Arlofski via Bacula-users wrote: This is in response to Josh... In my experience, with RDX, the docking bay itself shows up as a device... (/dev/usbX or /dev/sdX, I forget) But plugging/unplugging an RDX cartridge does not notify the kernel in any way, so udev

Re: [Bacula-users] Again vchanger and volumes in error...

On 3/15/24 12:28, Marco Gaiarin wrote: Following the hint on: https://gitlab.bacula.org/bacula-community-edition/bacula-community/-/issues/2683 i (re)post here, seeking feedback. Situation: bacula 9.4 (debian buster), using RDX cassette/disks for backup, using the wonderful

Re: [Bacula-users] LTO tape performances, again...

On 1/24/24 12:48, Marco Gaiarin wrote: My new IBM LTO9 tape unit have a data sheet performace of: https://www.ibm.com/docs/it/ts4500-tape-library/1.10.0?topic=performance-lto-specifications so on worst case (compression disabled) seems to perform 400 MB/s on an LTO9 tape.

Re: [Bacula-users] Having difficulty mounting curlftpfs on bacula : "Device is BLOCKED waiting for mount of volume"

On 11/29/23 05:47, MylesDearBusiness via Bacula-users wrote: Hello, Bacula experts. Due to message length limitations of this mailing list, I have been unable to post the majority of necessary details, which is why I was using my github gist system to store, apologies for the confusion or

Re: [Bacula-users] fd lose connection

On 11/8/23 13:32, Martin Simmons wrote: On Wed, 8 Nov 2023 11:09:44 -0500, Josh Fisher via Bacula-users said: On 11/7/23 19:26, Lionel PLASSE wrote: I’m sorry but no wi-fi nor 5G in our factory, and don't use my phone too to backup my servers :) . I was talking about ssh (scp) transfer just

Re: [Bacula-users] fd lose connection

st regards PLASSE Lionel | Networks & Systems Administrator 221 Allée de Fétan 01600 TREVOUX - FRANCE Tel : +33(0)4.37.49.91.39 pla...@cofiem.fr www.cofiem.fr | www.cofiem-robotics.fr -Message d'origine----- De : Josh Fisher via Bacula-users Envoyé : mardi 7 novembre 2023 18:01 À 

Re: [Bacula-users] fd lose connection

On 11/7/23 04:34, Lionel PLASSE wrote: Hello , Could Encryption have any impact in my problem. I am testing without any encryption between SD/DIR/BConsole or FD and it seems to be more stable. (short sized job right done , longest job already running : 750Gb to migrate) My WAN connection

Re: [Bacula-users] Progressive Virtual Fulls...

On 9/29/23 06:07, Marco Gaiarin wrote: Mandi! Josh Fisher via Bacula-users In chel di` si favelave... I'm really getting mad. This make sense for the behaviour (the first VirtualFull worked because read full and incremental for the same pool) but still the docs confuse me. https

Re: [Bacula-users] Progressive Virtual Fulls...

On 9/26/23 12:48, Marco Gaiarin wrote: Mandi! Rados??aw Korzeniewski In chel di` si favelave... Because of this. To make Virtual Full Bacula needs to read all backup jobs starting from Full, Diff and all Incrementals. Your Full (as volume suggests) is stored on Obito_Full_0001 which has

Re: [Bacula-users] Slow spooling and hashing speed

On 9/14/23 15:35, Rob Gerber wrote: Bacula is transferring data at a fraction of the available link speed. I am backing up an SMB share hosted on a fast NAS appliance. The share is mounted on the bacula server in /mnt/NAS/sharename. I have dedicated 10gbe copper interfaces on the NAS and the

Re: [Bacula-users] Restore job forward space volume - usb file volume

On 8/25/23 12:06, Martin Simmons wrote: On Thu, 24 Aug 2023 15:51:18 -0400, Josh Fisher via Bacula-users said: Probably you have compression and/or encryption turned on. In that case, Bacula cannot simply fseek to the offset. It has to decompress and/or decrypt all data in order

Re: [Bacula-users] Restore job forward space volume - usb file volume

On 8/24/23 05:32, Lionel PLASSE wrote: Hello, For usb harddrive and file media volume, when I do a restore job I get a long waiting step : "Forward spacing Volume "T1" to addr=249122650420" I remember I managed to configure the storage resource to quickly restore sdd drives. Should I

Re: [Bacula-users] compression with lto?

On 5/17/23 14:14, Phil Stracchino wrote: On 5/17/23 12:52, Marco Gaiarin wrote: I've LTO tape that work in very dusty environment by at least 6 years. Istead of dust, i've found that setting properly spooling and buffers prevent the spinup/spindown effect, that effectively can be very

Re: [Bacula-users] Bacula, Autochangers, insist on loading 'not in changer' media...

I would add that this problem appears to occur when all in-changer tapes are unavailable due to volume status AND the job's pool does contain available tapes, but those tapes are not in-changer. Bacula will attempt to load a tape that is not in-changer, where it should send an operator

Re: [Bacula-users] Virtual Full backups where nextpool is a different sd

On 3/22/23 13:29, Bill Arlofski via Bacula-users wrote: On 3/22/23 10:23, Mark Guz wrote: Hi, I'm trying to get virtual full backups working.  I'm running 13.0.2. The differentials are being backed-up to a tape library in 1 location which is not usually manned, so I'm trying to get the

Re: [Bacula-users] SD stalled?!

On 12/19/22 04:55, Marco Gaiarin wrote: Mandi! Josh Fisher In chel di` si favelave... Does the firewall on sdpve2.sd.lnf.it allow connections on TCP 9103? Is there an SD process on sdpve2.sd.lnf.it listening on port 9103? You can try to 'telnet sdpve2.sd.lnf.it 9103' command from

Re: [Bacula-users] SD stalled?!

On 12/15/22 04:37, Marco Gaiarin wrote: Mandi! Josh Fisher via Bacula-users In chel di` si favelave... Also, you have tried using 'umount' and 'update slots' in bconsole, but did you try the 'mount' command? It is the mount command that would cause bacula-dir to choose a volume and invoke

Re: [Bacula-users] SD stalled?!

On 12/12/22 10:47, Marco Gaiarin wrote: I'm using 'vchanger' script defining some virtual changer. I don't see that Dir is reporting any errors invoking vchanger, no timeouts or vchanger errors, but are there any vchanger processes still running? The vchanger processes should be very short

Re: [Bacula-users] VirtualFull, file storage, rsnapshot-like...

On 11/2/22 14:13, Marco Gaiarin wrote: Mandi! Marco Gaiarin In chel di` si favelave... Pool definition: Pool { Name = VDMTMS1FilePool Pool Type = Backup Volume Use Duration = 1 week Recycle = yes # Bacula can automatically

Re: [Bacula-users] Bacula Client Behind NAT

On 10/18/22 17:51, Bill Arlofski via Bacula-users wrote: Hello Josh (everyone else too), I can confirm that if the FD --> DIR connection is opened, then the Director does use this socket to communicate to the FD. Excellent! However, the "Connecting to Client..." message does not change,

Re: [Bacula-users] Bacula Client Behind NAT

On 10/17/22 20:09, Bill Arlofski via Bacula-users wrote: On 10/17/22 13:14, Rodrigo Reimberg via Bacula-users wrote: > Telnet from DIR to FD on port 9102 not ok, I’m using ConnectToDirector parameter. Hello Rodrigo, Of course this will not work. The client is behind NAT, and the Director

Re: [Bacula-users] VirtualFull, file storage, rsnapshot-like...

On 10/16/22 12:21, Marco Gaiarin wrote: Mandi! Radosław Korzeniewski In chel di` si favelave... ... I do not understand your requirements. What is an "initial backup" you want to make? Are you referring to the first Full backup which has to be executed on the client? Exactly. VirtualFull

Re: [Bacula-users] Bacula Client Behind NAT

On 10/16/22 11:44, Rodrigo Reimberg via Bacula-users wrote: Hello, Can someone help me? I did the configuration of the client behind nat. The client is communicating with the director as there is no error in the "working" directory. When I access bconsole in the director and run the

Re: [Bacula-users] best practices in separating servers support Bacula processes

On 10/12/22 15:10, Robert M. Candey wrote: I've been using Bacula to back up many servers and desktops to a tape library since early on, but always had one server running all of the Bacula processes except for the individual file servers. I'm setting up a new tape library and have new data

Re: [Bacula-users] Problem Importing Tapes Into Catalog

The volumes have been purged from the catalog, so thecatalog needs to be rebuilt using the bscan utility. See https://www.bacula.org/13.0.x-manuals/en/utility/Volume_Utility_Tools.html#SECTION00172 On 9/9/22 07:02, Charles Tassell wrote: Hello Everyone,   I'm having a problem

Re: [Bacula-users] LTO via USB

I don't think it can be done by USB. The SAS-to-USB chips operate in "mass storage" mode, suitable for SAS hard drives. The LTO drive will need an adapter that operates in SCSI emulation mode. I don't know of any adapters that aren't strictly for hard drives, but maybe there are. Another

Re: [Bacula-users] bsmtp from within a container

On 8/2/22 16:46, Justin Case wrote: The container uses the container ID as hostname. nothing I can do about it with DNS. I will retire the Synology mail server at somepoint but that is months in the future. I disabled authentication for local networks, but still: 504 5.5.2 <3422f1072002>:

Re: [Bacula-users] bacula-dir: 13, crash on stackoverflow (FreeBSD)

. The crash is happening in the director, but find_one_file is called in the client. __Martin On Mon, 18 Jul 2022 08:33:30 -0400, Josh Fisher said: So, v. 13.0 calls alloca() in the following source files: findlib/mkpath.c findlib/find_one.c lib/bnet_server.c lib/parse_conf.c tools/bsmtp.c

Re: [Bacula-users] bacula-dir: 13, crash on stackoverflow (FreeBSD)

So, v. 13.0 calls alloca() in the following source files: findlib/mkpath.c findlib/find_one.c lib/bnet_server.c lib/parse_conf.c tools/bsmtp.c tools/bsmtp.c win32/compat/compat.h win32/compat/compat.cpp win32/compat/compat.cpp win32/libwin32/statusDialog.cpp and that list is unchanged from the

Re: [Bacula-users] bacula-dir: 13, crash on stackoverflow (FreeBSD)

On 7/17/22 06:10, Andrea Venturoli wrote: On 7/16/22 19:07, Larry Rosenman wrote: msg=0x88ac6d34f "stack overflow detected; terminated") at /usr/src/lib/libc/secure/stack_protector.c:130 #2  0x00088ad66010 in __stack_chk_fail () at

Re: [Bacula-users] Q: Bacula for TrueNAS Core?

On 6/20/22 06:35, Justin Case wrote: Thats right. Such a plugin is something like a wrapper/installer that creates a jail environment for an existing application and hopefully provides a nice interface. So in the case of Bacula it would be a jail where all components are installed, so that

Re: [Bacula-users] Q: ConnectToDirector not working as documented for FD Director directive

, you will have to upgrade to version 11.x on all clients and Director and Storage daemons. On 6/17/22 17:35, Justin Case wrote: That is the normal debian package “bacula-client”. Which other package would I use instead? On 17. Jun 2022, at 21:08, Josh Fisher wrote: You must have an old

Re: [Bacula-users] Q: ConnectToDirector not working as documented for FD Director directive

have attached the config file there). On 17. Jun 2022, at 14:16, Josh Fisher wrote: Did you follow the error message's suggestion? "Perhaps you left the trailing brace off of the previous resource" (or A previous resource in the bacula-fd.conf file) We would need to see the ent

Re: [Bacula-users] Q: ConnectToDirector not working as documented for FD Director directive

Did you follow the error message's suggestion? "Perhaps you left the trailing brace off of the previous resource" (or A previous resource in the bacula-fd.conf file) We would need to see the entire bacula-fd.conf file in order to help. On 6/15/22 22:36, Justin Case wrote: Hi there, I

Re: [Bacula-users] Q: regarding bconsole.conf on Bacula client machines

On 6/15/22 08:12, Justin Case wrote: Hi all, when installing the bacula-client packageon Debian I end up i /etc/bacula with bacula-fd.conf and bconsole.conf I have 2 questions, that are still open although I searched through the main documentation and read the chapters containing

Re: [Bacula-users] Beta Release 11.3.4

On 6/8/22 11:56, Eric Bollengier via Bacula-users wrote: Hello, On 6/8/22 17:47, Bill Arlofski via Bacula-users wrote: On 6/6/22 07:37, Josh Fisher wrote: Why does this choice happen only at job start? I have always thought it should occur at each volume selection, which might alleviate

Re: [Bacula-users] Beta Release 11.3.4

On 6/3/22 14:34, Bill Arlofski via Bacula-users wrote: On 6/3/22 09:51, Josip Deanovic wrote: Could you please say few words about "Job Storage group support" feature. What exactly is that? I tried to search for it on the net, including the documentation but couldn't find anything that would

Re: [Bacula-users] Different copy jobs and in which pool to be the target

les one for each catalog... because as you see... the catalog is part of the name of the pool and... that was really the question if I could specify the next pool in the own archival jobs... creating one for each archival job.... As always many thanks mates :) Cheers!! __

Re: [Bacula-users] Different copy jobs and in which pool to be the target

regards, El 2022-05-25 16:38, Josh Fisher escribió: ATENCION ATENCION ATENCION!!! Este correo se ha enviado desde fuera de la organizacion. No pinche  en los enlaces ni abra los adjuntos a no ser que reconozca el remitente y sepa  que el contenido es seguro. On 5/25/22 08:12, egoitz--- via Bacula

Re: [Bacula-users] Different copy jobs and in which pool to be the target

On 5/25/22 08:12, egoitz--- via Bacula-users wrote: Good morning, I have question for whom I have not find a possible answer in the net or my kindle Books of Bacula... I wanted to have two different pools with different retention periods for full copied jobs. In that pools I would like

Re: [Bacula-users] Question about scratch pool

On 5/24/22 06:51, Heitor Faria wrote: Still unsupported... Sorry. You are right. It is not needed for scalability purposes, but one Director can have many different Catalogs as desired. And each catalog will have its own unique Scratch pool. In fact, all of the pools (and all other

Re: [Bacula-users] Remote FD cannot authenticate to local LAN SD

On 2/14/22 11:24, JD Atkinson wrote: I have a SD system on a local LAN, that can back itself up, and backup another server on the LAN no problem. Across a routed network, is an FD that tests fine for "bconsole status client". In none of my configurations will you find "localhost", and IP

Re: [Bacula-users] Virtual tapes or virtual disks

subnets and multiple Bacula Storage Daemons. It just depends on the environment. Josh Fisher escreveu em qui., 27/01/2022 às 18:50 : On 1/26/22 12:42, dmitri maziuk wrote: > On 2022-01-26 11:06 AM, Peter Milesson via Bacula-users wrote: >> > ... >> Your

Re: [Bacula-users] Virtual tapes or virtual disks

On 1/26/22 12:42, dmitri maziuk wrote: On 2022-01-26 11:06 AM, Peter Milesson via Bacula-users wrote: ... Your way of explaining the reasoning of why to use smaller file volumes, is very appreciated. ... The only thing I haven't found out is how to preallocate the number of volumes

Re: [Bacula-users] Virtual tapes or virtual disks

On 1/25/22 03:31, Lionel PLASSE wrote: I’ve made a rotation system like this With one Bacula storage “backup” corresponding one Bacula device “Backup”<=> root directory /pool-bacula/ automounted by udev. And 3 pool full, diff, incr attached to this device I have 8 usb disk xfs formatted

Re: [Bacula-users] Fast drives for use as Bacula spool

On 1/10/22 11:04, Philip Pemberton via Bacula-users wrote: Hi all, I'm using Bacula to back up a pair of servers (my firewall and NAS), backing up to an LTO6 drive. This requires a sustained data rate of around 150MB/sec with on-drive compression disabled, or more with compression. I

Re: [Bacula-users] "Airgapping" USB drives used for backup?

On 12/22/21 12:47, Phil Stracchino wrote: On 12/22/21 09:03, Neil Balchin wrote: I’ve been down that road,  yes bacula can certainly be configured to handle that at least on a ’nix system.  Before your get too far though, you should do your own research on the reliability of spinning disk

Re: [Bacula-users] Distributed Bacula daemons

On 12/21/21 07:19, Heitor Faria wrote: Hello Yateen, We need to host bacula-dir, bacula-sd and PostgreSQL on different servers, what is an efficient architecture amongst the two options given below: 1. Hosting bacula-dir and PostgreSQL together on one host, bacula-sd

Re: [Bacula-users] New Bacula Server with multiple disks

of dynamically creating the symlinks needed to use N filesystems as one large store, rather than N disks as one filesystem. Cheers, Josh Fisher ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo

Re: [Bacula-users] New Bacula Server with multiple disks

On 12/16/21 06:19, Josip Deanovic wrote: On 2021-12-16 10:44, mac-eduki2.co.uk wrote: Good day I hope this message finds you all well. I have been running a small Bacula server with a single disk for a number of years now and it has become a vital part of our small business. I setup our

Re: [Bacula-users] Bacula Client Behind NAT

On 12/2/21 11:46, Eric Bollengier via Bacula-users wrote: Hello Wanderlei, On 12/2/21 15:56, Wanderlei Huttel wrote: I'm trying to configure the new feature in in Bacula, but manual is not clear about it.

Re: [Bacula-users] Bacula Client Behind NAT

On 12/2/21 09:56, Wanderlei Huttel wrote: I'm trying to configure the new feature in in Bacula, but manual is not clear about it. https://www.bacula.org/11.0.x-manuals/en/main/New_Features_in_11_0_0.html#SECTION00230 In the company have some employees that sometimes are working

Re: [Bacula-users] Packet size too big (NOT a version mismatch)

On 11/22/21 10:46, Stephen Thompson wrote: All, I too was having the issue with running a 9x client on Big Sur.  I've tried compiling 11.0.5 but have not found my way past: This might be due to a libtool.m4 bug having to do with MacOS changing the major Darwin version from 19.x to 20.x.

Re: [Bacula-users] Can't resume failed restore job

On 11/10/21 05:49, Samuel Zaslavsky wrote: Hello everyone, I created a restore job that failed because of no more space on the targeted hard drive. I changed the hard drive, remounted it, etc, and tried a resume command, but this causes an error : /Could not get pool record for

Re: [Bacula-users] Slow transfer rate - MS Win 2019

, Josh Fisher Thanks, Andras On Thu, Nov 4, 2021 at 1:12 PM Jose Alberto wrote: Client:                .  11.0.5 (03Jun21) Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 (build 7601), 64-bit,Cross-compile,Win64 Rate:                   26497.7 KB/s

Re: [Bacula-users] back up RHEL 8 server from Centos 7

On 10/28/21 10:54, Clouse, Raymond [JT4 LLC] wrote: After much trial and tribulation I've finally got Bacula working with our tape autochanger and backing itself up and another remote server on our air gapped development network. Problem is, our autochanger is not compatible with RHEL 8 yet

Re: [Bacula-users] Slow transfer rate - MS Win 2019

On 10/16/21 17:37, Andras Horvai wrote: Dear List, Recently I faced to the following problem what I cannot solve: I would like to backup a file server. It is a physical machine with Windows 2019 operating system. This bacula sd is on the same vlan as this server (sd and dir is on the same

Re: [Bacula-users] Storage Daemon stopped with NFS mounted storage

instead of NFS. At the moment bacula-dir & bacula-sd run on a single host. The disk space from the filer is used through NFS mounts on the bacula host. Yateen *From:*Josh Fisher *Sent:* Monday, October 4, 2021 8:27 PM *To:* bacula-users@lists.sourceforge.net *Subject:* Re: [Bacula-u

Re: [Bacula-users] Storage Daemon stopped with NFS mounted storage

On 10/2/21 2:52 AM, Shaligram Bhagat, Yateen (Nokia - IN/Bangalore) wrote: Hi All, We are using Bacula 9.4.4 with PostGreSQL for disk based backeup. Disk space is available to Bacula storage daemon as an NFS mount from a remote ZFS based filer that has RAID configured disks. Recently one

Re: [Bacula-users] How to continue after a Failed job ?

On 9/2/21 9:50 AM, Dan-Gabriel CALUGARU wrote: Hello everybody, I would like to ask for your help to continue the backup of space of around 300 TB. I'am using Bacula 9.6.7 version. I was able to divide this work into several jobs of about 15-20 TB (one week for each job) to be able to

Re: [Bacula-users] Encrypted restore fails with openssl errors

On 8/6/21 6:46 PM, Robert Earl wrote: OK Bacula Pros: So I looked into the link provided about openssl and discovered that I had reversed the order in my .pem file, putting the public CERT first and the private KEY second. I noticed that another client fdhadnot been victim to the same error.

Re: [Bacula-users] Encrypted restore fails with openssl errors

It looks like the bacula-fd has the wrong key. Are you restoring to the correct client machine? On 8/6/21 7:30 AM, Robert Earl wrote: Greetings, Bacula User Types! Long time no see! Because I am in the throes of doing many dangerous maintenance tasks on my server, I took the liberty of

Re: [Bacula-users] Doing backup and restore simultaneously on two device setups

On 7/20/21 2:53 PM, William Muriithi wrote: Hello We are using bacula version 9 and we have been happy with it. We have 2 quantum superloader 3 we use to offload the data, one for Linux system and the other one for Windows systems. In short, the two storage devices don't have any

Re: [Bacula-users] Which OS is best for bacula ?

On 7/11/21 5:10 PM, Josip Deanovic wrote: On Sunday 2021-07-11 18:31:24 Kern Sibbald wrote: Hello Sven, Yes, I am aware of the FHS policy, which is perfectly fine for 99.9% of all installed programs, but not ideal for Bacula. Hello, There is nothing special about Bacula in that regard. I

Re: [Bacula-users] Which OS is best for bacula ?

I'm pretty sure Centos 7 isn't EOL until 2024. It was Centos 8 that was cut off. AFAIK, Red Hat has made no mention of shortening the Centos 7 life cycle. I have been moving Centos 8 installs to Rocky Linux without any problems. Bacula RPMs for el8 install and run fine on Rocky. Rocky is a

Re: [Bacula-users] Bacula & Multiple Tape Devices

On 4/24/21 6:37 PM, William Muriithi wrote: Hello. I have two QUANTUM media changer and currently, I have been unable to use them with bacula concurrently. I have googled and attempted multiple changes on configuration, no luck. I have also attempted to separate the hardware as much as

Re: [Bacula-users] Bacula For Mac Clients

On 2/24/21 5:14 AM, Radosław Korzeniewski wrote: Hello, wt., 23 lut 2021 o 21:29 David Brodbeck > napisał(a): On Mon, Feb 22, 2021 at 11:50 PM Radosław Korzeniewski mailto:rados...@korzeniewski.net>> wrote: The newest Bacula Clients should use

Re: [Bacula-users] Bacula For Mac Clients

On 2/15/21 2:14 PM, Martin Simmons wrote: On Fri, 12 Feb 2021 17:47:52 -0500, Josh Fisher said: On 2/12/21 12:53 PM, Martin Simmons wrote: I don't understand the comment about "refactor" or "all instances" unless there are other errors as well. By refactor, he means th

Re: [Bacula-users] Bacula For Mac Clients

On 2/12/21 12:53 PM, Martin Simmons wrote: On Thu, 11 Feb 2021 13:28:31 -0800, jmaness said: On Thu, Feb 11, 2021 at 12:54 PM Josh Fisher wrote: On 2/11/21 12:40 PM, jman...@engineering.ucsb.edu wrote: Hello! About two years ago our Bacula client package stopped working

Re: [Bacula-users] Bacula For Mac Clients

On 2/12/21 5:26 AM, Radosław Korzeniewski wrote: Hello, czw., 11 lut 2021 o 22:29 <mailto:jman...@engineering.ucsb.edu>> napisał(a): On Thu, Feb 11, 2021 at 12:54 PM Josh Fisher mailto:jfis...@jaybus.com>> wrote: On 2/11/21 12:40 PM, jman...@engin

Re: [Bacula-users] Bacula For Mac Clients

On 2/11/21 12:40 PM, jman...@engineering.ucsb.edu wrote: Hello!      About two years ago our Bacula client package stopped working in Catalina. We've figured out that the binaries were compiled for PPC and i386 Macs and I suspect the issue is that we need a client for x86_64 or ia64.      

Re: [Bacula-users] Catalogue backups

On 2/8/21 5:10 PM, Robert Adesam wrote: Dear Bacula users, after each nightly backup session I run a catalogue backup job making a full backup of the catalogue. A single full catalogue backup is now about 15GB and increasing... As of today I estimate I in total have 1.4TB of catalogue backups.

Re: [Bacula-users] Improving Bacula backup performance

On 12/18/20 4:26 PM, Philip Pemberton via Bacula-users wrote: Hi all, I'm trying to improve the performance of my Bacula backups. I have a configuration with two machines: - "A" - a small server running a few web services. (Intel Celeron J1800 2.4GHz dual-core) - "B" - a 9TB NAS with

Re: [Bacula-users] Bacula windows backup really slow

9-8030 Celerium Office: 703-418-6315 www.celerium.com <http://www.celerium.com/> <https://htmlsig.com/t/01EWFY3Y> <https://htmlsig.com/t/01ETVPF1> <https://htmlsig.com/t/01EP3BJ4> On 12/16/20, 9:09 AM, "Josh Fisher" wrote: The message has or

Re: [Bacula-users] Bacula windows backup really slow

<https://htmlsig.com/t/01EP3BJ4> On 12/16/20, 8:42 AM, "Josh Fisher" wrote: The message has originated from an External Source. Please use caution when opening attachments, clicking links, or responding to this email. I'm late answering this, but I suggest trying agai

Re: [Bacula-users] Bacula windows backup really slow

I'm late answering this, but I suggest trying again with some TCP offloading features disabled on the interface used by SD. /sbin/ethtool -K ethX tso off gso off gro off There are indeed buggy drivers that fail to properly support the (virtual?) hardware offload features, including at least

Re: [Bacula-users] How to change which drive is used by default

On 11/19/20 1:32 PM, byron wrote: I'm running version 9.0.6 on debian stretch I have a tape library with two drives configured as follows in bacula-sd.conf.  I run 10 jobs every night and they always all run on Drive-1.  I'm now having a problem with that Drive and would like to force all

Re: [Bacula-users] ERR=20:"unable to get local issuer certificate"

On 11/10/20 2:11 PM, David Newman wrote: Director: FreeBSD 12.2, bacula-server-9.6.6 from pkgs Client: OpenBSD 6.8, bacula-client-9.6.5 from pkgs After upgrading a bacula client's OS from OpenBSD 6.7 to 6.8, nightly backups run successfully but throw this warning: ERR=20:"unable to get local

Re: [Bacula-users] Backup from client with deduplication

On 10/8/20 5:00 AM, Radosław Korzeniewski wrote: Hello, śr., 7 paź 2020 o 13:59 Рукавцов Дмитрий Геннадьевич mailto:m...@santel-navi.ru>> napisał(a): "Enable VSS = no" as i said not solving this problem, and i dunno why, i don't care about locks. Bacula can't just copy files?

Re: [Bacula-users] performance challenges

On 10/6/20 3:45 AM, Žiga Žvan wrote: I believe that I have my spooling attributes set correctly on jobdefs (see bellow). Spool attributes = yes; Spool data defaults to no. Any other idea for performance problems? Regard, Ziga The client version is very old. First try updating the client to

Re: [Bacula-users] performance challenges

On 10/5/20 9:20 AM, Žiga Žvan wrote: Hi, I'm having some performance challenges. I would appreciate some educated guess from an experienced bacula user. I'm changing old backup sw that writes to tape drive with bacula writing  to disk. The results are: a) windows file server backup from a

Re: [Bacula-users] Newly added clients timing out

On 9/24/20 5:43 PM, Brendan Martin wrote: Greetings. I need to revisit a topic I saw a little over a year ago that didn't get any response. I have added several clients to a new director.  Of those added so far, I have two to which the director is unable to connect.  They both report

[Bacula-users] Solution for a strange network error affecting long running backups

Thought I would share my experience debugging a strange problem affecting long running backups. A particular job was failing with a "network send error to SD" at between 90-120 minutes after 100s of GB were written. Enabling heartbeat on Dir, SD, and client had no effect and the problem

Re: [Bacula-users] initialize backup from client

On 7/16/2020 8:56 AM, Adam Weremczuk wrote: Hi all, As some of my remote users haven't been to the office for months no backups of their laptops have been taken. The reason is VPN is configured one way. Remote users can access internal resources but no internal systems are aware of their

Re: [Bacula-users] 9.6.5 compiles on Debian 10, but does not run

On 6/25/2020 8:10 AM, r0...@nxlplyx.com wrote: Hi Rad, Apparently Bacula does not like localhost, changing it to 127.0.0.1 worked. Most likely localhost is resolving to the ::1 IPv6 address. Generally, if a name has both an IPv4 and IPv6 address, then the resolver will return the IPv6

Re: [Bacula-users] Data spooling failing with Permission Denied

On 6/17/2020 11:35 PM, Ryan Sizemore wrote: Hi, I have a Job that I want to use data spooling with. The Job reads from a locally-mounted NFS share, and writes to an LTO-4 tape. Since writing to tape will be faster than reading over the network, I want to spool the data locally. However,

Re: [Bacula-users] areas for improvement?

On 6/10/2020 8:04 AM, Kern Sibbald wrote: Hello, ... Now on the fact that line drops cancel jobs: First Bacula was designed with the concept that it would have a stable communications line as is supposed to be provided by TCP/IP, which Bacula uses.  This was a correct design based on

Re: [Bacula-users] areas for improvement?

On 5/29/2020 5:23 AM, Radosław Korzeniewski wrote: Hello Alan, śr., 27 maj 2020 o 17:02 Alan Brown > napisał(a): Database connections are _supposed_ to be stateless. I'm very surprised about the above statement as I cannot imagine such functionality already

Re: [Bacula-users] Understanding virtual autochanger default config

On 5/14/2020 7:23 AM, Alberto Bortolo wrote: Hello, I'm completely a newbie with Bacula: I'm studying all the guides and just few days ago I've been able to us it! Success! But I still cannot understand how the virtual autochangers work: I touched very little from the default config and I

Re: [Bacula-users] Vchanger 1.0.3 Released

committed the code? Best regards *Wanderlei Hüttel* Em ter., 12 de mai. de 2020 às 18:12, Josh Fisher <mailto:jfis...@jaybus.com>> escreveu: Vchanger 1.0.3 was released today. This is mostly a bug fix release, correcting the number of slots reported by SIZE/LIST

[Bacula-users] Vchanger 1.0.3 Released

. Bugs Fixed: 17 SIZE/​LIST commands return wrong number of slots 18 Compilation fails on FreeBSD 13 (head) Enjoy! Josh Fisher ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo

Re: [Bacula-users] Compilation Errors of Bacula 9.6.3 on Ubuntu 18.04

On 5/11/2020 7:38 AM, Kern Sibbald wrote: Hello Sven, I share your concerns, but here are a few mitigating factors: 1. I am not aware of any other C/C++ S3 library that will do the same job and is well maintained.  I have to admit I have not looked recently, so any suggestions would be

Re: [Bacula-users] Multithreaded backups?

On 4/28/2020 5:05 AM, Mark Dixon wrote: Hi David, Running two jobs on a client takes the FD's CPU utilisation from 100% to 200%, so it does look multi-threaded. Yes. I believe the client is multi-threaded in that multiple commands can be issued and they will each be handled in a

  1   2   3   4   5   6   7   8   >