[darktable-user] DT 4.6 crash on copy & import
Before you upgrade from Darktable 4.4 to 4.6.0 please switch *off* the option "/recursive directory/" in the import-dialog window. If this option is on, DT will freeze when attemting to copy & import. If you have already upgraded you can't switch it from the gui, because the option is in the window that freezes. Then edit "~/.config/darktable/darktablerc" and change "ui_last/import_recursive=TRUE" to "FALSE". -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Installing darktable 4.6 in Ubuntu 22.04.3 why is it so hard?
Am 27.12.23 um 14:04 schrieb Andrew Greig: ... I would like to install 4.6 because I purchased an Olympus TG-7, and DT can open the .orf files. Andrew It isn't hard. Type into terminal: sudo add-apt-repository ppa:ubuntuhandbook1/darktable sudo apt update sudo apt upgrade -- Frank https://fotodrachen.de darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Tags in xmp files
Am 01.01.23 um 22:43 schrieb Dieter Faulbaum: Bruce Williams writes: Is there a way to get dt to read the tags from the xmp files and add those tags to whatever database file they should live in? I would prefer NOT to have to enter all the tags again if I can avoid it! There is an option in the storage part 'look for updated XMP file on startup'. Is it enabled on your Linux system? Maybe this will help? No, this Option works every time at the start of Darktable and compares all imported pictures for changes (from an other instance?). This is not necassary when importing *new* pictures (without or with .xmp) into the system. There is no old version to compare. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Darktable on xubunbu 22.04 / wayland / nvidia: Recommended or not?
Am 13.07.22 um 14:04 schrieb Šarūnas: ... I wish to be wrong, but color management in Wayland may still have a long way to go [1]. ... 1. https://gitlab.freedesktop.org/wayland/weston/-/issues/467 Now I get an idea, what the reason for my problems may be. Because Ubuntu 20.04 on my mashine had some problems on startup, last week I decided to do the LTS-upgrade earlier then 22.04.1 is released on 4th August. I got DT 4.0 from PPA "unbuntuhandbook". After upgrade to some new nvidia-drivers, the openCL-Support in DT was fixed. But one of my displays (EIZO) seemed to be out of calibration, it looks a bit too green after the upgrade. I found, that DisplayCAL (3.8.x) is not longer in the sources in 22.04 because of the dependencies to python 2, with is not longer supported. But there is a new projekt "DisplayCAL-PY3" porting the code to python 3. It can be installed with "pip install DisplayCAL" which gives you a version 3.9.6, still in progress but works. The calibration of my new ASUS-display was done in half an hour. But the calibration of my older EIZO (has run more then 8000 hours), takes 2 days with many attempts. Each run with other results, some lookes green, some looked magenta, some had bad messages. Sometimes even the hardware-defined RGB-start-point drifted from one attempt to the next. Each time the result was different, the colors seemed to be "unstable". I worried, the last days of my diplay has come. At least (after a dozen tries) I got a icc-profile that seems to work. May this problems result from an unstable implementation of colormanagement in wayland in Ubuntu 22.04? Or should I begin to save some money for a new display? Why does Ubuntu do an upgrade to a system without a stable colormanagement? Hardware: NVidia GeForce GTX 1060 6GB, ASUS VA24E, EIZO FORIS FS2333, XRite colormunki Smile. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Setting up darktable newly from scratch
Hallo Peter, a new setup and a new import will take long time and maybe the result is nearly the same as before because database and xmp-files "should have" the same content. But you will loose your preferences, styles, preview-cache, ... > some things were .. not copyed You can use "preferences / storage / look for updated xmp files on startup" to synchronize the database with the xmp's. Changes on pictures, done with a second system (laptop/desktop) will be imported. Switch to "on", restart darktable, switch "off" after sync for a quicker start. > a lot of unnecessary things have accumulated in the database. Have a look at "history stack" / "compress history". This will delete all iterations and attempts and reduce the stack to the final result. (This compression will not happen with a re-import.) To clean up you can manually delete unused styles or unused tags (assigned to 0 pictures). Frank Am 09.07.22 um 07:24 schrieb Peter Schlaufer: Hello and thank you Sorry, I did not write it correctly, since I was copyig the config and cache folders between laptop and desktop backwards and forwards and in one of these operations some things were (presumably) not copyed and I get the full informations on xmp's. But I do have a full copy of some ten days ago. Anyway thank you for the help Regards Peter Schlaufer Am 08.07.22 um 15:53 schrieb Willy Williams: I, like Maurizio, would prefer to understand what you term "unnecessary things". If you're going to do a clean install of darktable 4.0, on which operating system, Windows, Linux or Mac? The locations will vary with the O/S. To address your specific questions: * Is this a good idea? - Don't know since you haven't been more specific. * As the xmp files are also stored on the external drive with the files, do they automatically fit in the new import? - If you tell darktable where to look for the files, it will also find the sidecar files associated with the image files, if they're maintained in the same folder as the images. * Do I have to delete the config and cache folders manually? - If you're uninstalling a prior version of darktable, first back up all your darktable user config and library files (on Windows - C:\Users\[username]\AppData\Local\darktable), then delete the folder in Windows before doing the delete/reboot/installation. * Off course I can then only import, what I want to have in the new setup. - This is YOUR option when it comes to importing. * Does anyone have a recommenation? - See the above four responses. Willy Williams ** On 7/8/2022 at 5:29, Peter Schlaufer wrote: Hello everybody I am with darktable since three years, in this time a lot of unnecessary things have accumulated in the database. For this reason I am thinking about setting up the program completely new an I think the new darktable 4.0 woul be a good time to do this.. My data are on a external ssd drive. Of course I woul make a saving of these data before deleting the existing application. I am aware, that I would have to import all the pictures again, now my questions: * Is this a good idea? * As the xmp files are also stored on the external drive with the files, do they automatically fit in the new import? * Do I have to delete the config and cache folders manually? * Off course I can then only import, what I want to have in the new setup. * Does anyone have a recommenation? I appreciate your help -- Kind regards from Switzerland Peter Schlaufer pe...@schlaufer.ch darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Change size in left column
Am 23.02.22 um 21:30 schrieb Michael Rasmussen: lighttable has shrunk to only display one line ... and I cannot expand it to show more lines. Can anybody help? Mouse over the module. Ctrl. + Mouse-Wheel Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] LUA AutoGrouper
Am 19.02.22 um 18:15 schrieb Patrick Shanahan: * Frank J. [02-19-22 12:07]: Does the Lua-Script "AutoGrouper" work with DT 3.8.1? (on Linux Ubuntu 20/04) I used AutoGrouper with DT 3.6. Just found, that the "Auto Group"-Tab is missing in the Lighttable in DT 3.8.1. ... my AutoGrouper.lua on master is dtd 1 Sept ... Master has changed on 31 Aug 2021: https://github.com/darktable-org/lua-scripts/blob/master/contrib/AutoGrouper.lua This Version ist installed, but it does'nt work for me. Is there an additional config to show the tab? Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] LUA AutoGrouper
Am 19.02.22 um 18:15 schrieb Patrick Shanahan: * Frank J. [02-19-22 12:07]: ... AutoGrouper is very usefull to put all pictures of a focus-stacking series into one group (gap = 1 sec.). do you not pull all of a focus-stacking series into one directory? simply group on the single directory, no lua necessary. fwiw: that is my workflow. I import the pictures of one day in one directory. For grouping manually OR for moving groups of pictures into other dirs you have to analyse the time. Sometimes the series are very similar, only some parameters have changed like the focus-step-width or the number of pictures in a series. The time-gab inside a series is mostly less then 1 second and the time gap from one series to another is "some seconds". Lua does this job very well and much faster then I. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] LUA AutoGrouper
Does the Lua-Script "AutoGrouper" work with DT 3.8.1? (on Linux Ubuntu 20/04) I used AutoGrouper with DT 3.6. Just found, that the "Auto Group"-Tab is missing in the Lighttable in DT 3.8.1. ~/.config/darktable/luarc has a line -- require "contrib/AutoGrouper" -- There is a file: ~/.config/darktable/lua/contrib/AutoGrouper.lua I searched for new version with: cd ~/.config/darktable/lua/ git pull There is no message when starting with darktable -d lua What's going wrong? AutoGrouper is very usefull to put all pictures of a focus-stacking series into one group (gap = 1 sec.). Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Go to folder from image
Am 28.01.22 um 22:16 schrieb Christian Birzer: ... Is there any way to open the folder in the collections panel where a image is located? I mean something like right click on the thumbnail in lighttable and "go to folder" which opens the folder view in collections and get me to the right folder. ... Thanks in advance! Christian I think, non of the answers really hit this question. I don't have the answer but let me try to the ask the question again. The collections-module is set to tagging (for example) and filters some pictures from different folders. You select one of the tag-filtered pictures and switch the collection-module to "folders" (left part) while taking the folder-path of the selected picture as the value (right part). Yes, that may be useful in some cases. The menue-item may be "show all pictures in this folder". But also ".. from this camera", ".. with this lens", -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Imported images are always way too dark
On Thu, 13 Jan 2022 at 01:42, bwh vanBeest wrote: > Thanks for all the reactions to my posting. I initially thought something > was wrong with my camera-DT-combination, but now I learned otherwise. I > have now learned what to do. Still, somehow it is unsatisfactory that a > picture of which you know is exposed correctly is initially displayed in DT > as underexposed. > > Regards > Bertwim What Darktable is actually showing you is that your images are underexposed, and you can expose farther to the right and still have highlights that are not blown. You will come to appreciate this if you have the patience. You cannot trust your in camera histogram for exposure, this is a fact. I have edited the exposure preset to apply +2 stops on import, this is about right for my Olympus cameras darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] DT can't access files on external hdd with special software
Am 13.01.22 um 22:27 schrieb hieke.vanhoogda...@gmail.com: ... The software that I bought should make it possible to *read* the ntfs-formatted disk ... I don’t know why dt doesn’t support that too. Hartelijke groet, Hieke van Hoogdalem Hallo Hieke, what's about *write*-access to ntfs? DT tries to write sidecars (*.xmp) in the folder of the raw-files. Generally your problem seems not to be a issue of darktable but an issue of the Mac-OS with the Windows-Filesystem; bad mix. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Imported images are always way too dark
Am 10.01.22 um 22:12 schrieb bwh vanBeest: Hi, When I import a series of images straight from the camera (Nikon D850, Nikon nef format) in Darktable (scene-referred workflow), the images invariably show up as way too dark, as if they are underexposed. The histogram shows a big unexposed part on the highlights. I am pretty sure though that when I took the pictures the exposure is about right (according to the camera histogram). The camera-generated jpg is also ok. What can be the cause of this and what can I do about it? Kind Regards, Bertwim Same effect here. I use Olympus-cameras, RAW only, correction +/- 0 EV in the Camera. After importing in DT the default in module "exposure" is "+0.5 EV" but this is too dark for nearly all pictures. I need to use a correction between +1.5 and +2.5 EV for the best look. This is not new in DT 3.8 but in 3.6 (or 3.4?) with the change to scene-referred workflow. I never compared with camera JPG. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Logitech mouse for DT
Has anybody managed to configure the Logitech-mouse "MX Master" to control darktable on Linux (via logiops or solaar)? For example: Use the thumb-wheel for exposure-slider. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] sharpening with "deep sky" methods?
Am 12.11.21 um 09:17 schrieb Dr. A. Krebs: Dear all: I just came across a potentially new sharpening procedure on "Profifoto" magazine: <https://www.profifoto.de/neuheiten/software/2021/11/02/schaerfung-mit-deep-sky-methoden/> . (in German language) According, it is transferred into a PS plugin. Maybe it is possible to adapt it for darktable? Axel Hi, where is the sourcecode and what is the licence? When it is not open source code and no open licence then the darktable-developers can't adapt the plugin to darktable. But the developers auf the sharpener-code had do adapt it for DT. PS is running on windows only. Will the code work well on Linux and Mac? -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Kodak GC 400 film
Am 06.11.21 um 02:11 schrieb David Vincent-Jones: Looks like I will have to do the scanning myself Darktable ist optimized für the development of raw-pics. Scanning (film, slides, ..) need other skills like reconstruction of original colors and detecting and removing dust on the film with a infrared-channel-scan. This is handled in software for scanning like VueScan. DT has no functions to read the 4th channel (IR) from scanner-raw for dust-removal. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] How to validate ?
Am 10.10.21 um 09:51 schrieb Remco Viëtor: On dimanche 10 octobre 2021 09:22:43 CEST Pierre Couderc wrote: Beginner question : I go in darkroom, and crop module. My image is fine : how do I validate ? I see no button, and if I turn back in lighttable image is not croped... Thanks for help. PC There is no explicit validation, crop should be applied when you leave the module, Remco Thats true for the Module "crop". But the module "crop an rotate" has a bug: When you go back to the lighttable directly after cropping in the picture the result is not applied. You have to click on on top of the "crop and rotate" tab to close it, then go to lighttable. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Thumbnail without original files
Am 03.04.21 um 12:46 schrieb Thomas Werzmirzowsky: That's the behaviour for my big image collection. But I cannot reproduce this behaviour in a small test collection that I created as an example for the bug report. So I guess it is somehow related to my specific collection. I'll do some more testing. On 03.04.21 12:29, Bernhard wrote: Thomas, have a look at these configurations: https://darktable.gitlab.io/doc/en/cpugpumemory.html Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Color Labels
Am 24.03.21 um 20:20 schrieb David Vincent-Jones: ... Currently the different colors have no different value. A red and a blue are simply labels and there is no ordering preference. I think that it would be helpful to me if each color contained a value which would keep colored images together in the label sorting. ... It's possible to sort by color label. https://darktable.gitlab.io/doc/en/filtering_and_sort_order.html 'Images in the lighttable view can be displayed in different sort orders, depending on ..., “color labels”, ..' So they must have a kind of value. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Deselect images in filmstrip
Am 12.02.21 um 23:44 schrieb Bruce Williams: Hi all, I vaguely recall that there is an odd quirk about how you de-select images in the filmstrip OF THE MAP PAGE. Would someone please remind me of what that is? A single click on a non-selected image doesn't do it. Ctrl+click doesn't do it. Shift+click doesn't do it. Thanks in advance! Cheers, Bruce Williams Hi Bruce, I learned a lot from your videos, proud to be able to give back a little bit. Ctrl+A = select all the pictures of the filmstrip Ctrl+Shift+A = unselect all images Found in Chapter 3.3.11.8 https://darktable.gitlab.io/doc/en/darkroom_bottom_panel.html#darkroom_filmstrip Works also in Map-View. At the begin of the strip, a single left-click into the empty space does it. My workflow: Filter "collext images" / "narrow down search" / "metadata - geotagging" / "not tagged" reduces the strip to a "To Do-List" and pics get unselected automaticly when they got a position. Frank Germany darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Geo Location Question
Am 30.01.21 um 18:40 schrieb David Vincent-Jones: Yes, it looks like the GPS coordinates are not correct within the image. Possibly a startup problem that I need to investigate. When a GPS-device has been switched off, moved to another location and switched on it needs some minutes to fix all "visible" sattelites and reach a good precision. When a GPS-devices has not been switched on for a longer time, it needs to "download" some long term data (almanache) from the sattelites. This may take some time. https://de.wikipedia.org/wiki/Almanach_%28GNSS%29 en ? Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] history / Filmic RGB random reversions & resets
I can confirm the "disappearing" adjustments on MacOS. I'm running a very modern machine on Catalina and version 3.0.2 I notice at times that when I use filmic, color balance and local contrast, things become unstable. I sometimes see the multiple instances of modules mentioned, even though I absolutely have not duplicated the instance, and if I try to go back one step and compress, the "new" instance will not go away. More disturbing is that when the darkroom module gets in this unstable mode, if I click farther down on the history stack to see where I was before adjustments, boom, all adjustments disappear without clicking compress history OR making any other adjustments. I haven't been able to figure out how to force this to happen, so I also haven't filed a bug report or captured a screencast. I know some of these modules are under heavy work so I'm just hoping that it is something that will work it's way out through bug fixes darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Focus Stacking
Am 19.04.20 um 20:48 schrieb J. Paul Bissonnette: Is focus stacking possible in darktable 3.0.2? I am using an Olympus OM D E-M5 mark 2 with the latest firmware. The reason I am asking is that the stacked jpg made by the camera is so much clearer than the stacked dng file from darktable. I maybe doing this all wrong I am assuming that focus stacking is a form of HDR and used the Create HDR button. Hallo Paul, I do focus-stacking with the following workflow: 1. Export minimal pre-processed pictures of the stack from darktable into a folder. 2. Align the stack with control-points 3. Compose the final picture from sharp parts 4. copy exif-tags to the result (time, camera) 5. re-import the result into darktable for final processing Examples: 1. You can crop the pictures but all must habe the same size. Use copy history stack for all pictures. You can use 16bit TIFF for better quality. 2. align_image_stack -v -m -a algn 20200420_0001.tif 20200420_0002.tif 20200420_0003.tif Without "-a " the dt-exports are overwritten with aligned versions. With "-p file" a *.pto is created. That is a hugin-Projekt for manual interaction. 3. enfuse "$@" --exposure-weight=0 --saturation-weight=0 \ --contrast-weight=1 --hard-mask --contrast-window-size=5 \ --compression=92 --output=stacked.jpg algn*.tif Hugin can be used as a GUI to manually define some inclusion-/exclusion-masks for step 3. But most stacking is well done without hugin. Step 3 can be done from hugin-gui. There is a LUA-Script "enfuse professional" to assist you in this workflow. It can be found at: https://www.multimedia4linux.de/index.php/bildbearbeitung/darktable/darktable-plugin-enfuse-professional But this LUA-Script will not work for a stack from your "Olympus OM-D E-M5 Mk.III" in some cases. The reason is: Olymus has two modes for focus-stacking A. Focus-BKT ON, but Focus-Stacking OFF B. Focus-BKT ON, and Focus-Stacking ON Mode A will take a set auf RAW-Pictures. Beginning with the focussed point, moving to the background. This will work with LUA "enfuse professional". Mode B will take a set of RAW and JPG and will process the stacked picture in the camera as JPG, as you described. The first picture will be taken at the focussed point. Then the focus jumps nearer and then stepwise to the back. Before processing this stack with "align_image_stack" in step 3 you have to *sort this pictures by focus-point*. "align_image_stack" compares the pictures pair-wise in the given order to find the control-points. The first taken picture will not match with the second (nearest). The position of the first picture will be skipped. It is possible that the two pictures before and after this position don't have overlapping sharp areas when this area is very small. When using the LUA-Script "enfuse professional" you have no chance to manually sort the pictures by "fucus-point" without renaming the pictures. Therefore I dont use "enfuse professional" but small shell-scripts (*.sh) on my Linux-System. A correction with hugin is not possible when using "enfuse professional". The aligned files are in /tmp and will be deletet. No chance for taking them for a hugin-project. Take care not to use lens-correction twice, in darktable and in the LUA-Script. The results auf "align_image_stack" + "enfuse" are better then the internal stacking of the camera. I got some results on stacks where the camera fails to stack. Good luck. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] cryptic icons
Am 13.03.20 um 09:00 schrieb Dr. A. Krebs: ... 3.) From there, I regularly move the oldest folders to NAS which serves a archive. So, my procedure is systematic against the capabilities, darktable provides. Hi, I have a similar workflow. Import an development of the RAWs happens on a fast SSD, which has limited space. Older projects are moved to a slower HDD as archive. There are two levels to optimize: 1. Move all images from a folder to a new folder in the archive from WITHIN darktable. DT will remove the empty folder. 2. When accidently a folder is moved or renamed from outside DT, then the foldername in "collect images"/"folders" is stroked thru. There is a context (right mouseclick) "search filmroll" for a dialog to show DT the new location. This will heal the database-entries for all pictures in the folder. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Troubles with grouping
DT 3.0.0 - MacOS I'm having trouble with grouping behavior and specifically selecting the image to be used as the thumbnail. When I select a set of images and GROUP, I see the G symbol at the top of each image. However if I click the G symbol in the header to "close" the group, then click it again to "open" the group, the G symbol on the thumbnails disappears, making it impossible to select the "key" image for the group. I find the interaction of the group command and the G toggle to be confusing. If the G toggle is ON (collapse groups) and I select images and choose the GROUP command, I get a yellow box around then all and the G symbol on each, but they remain OPEN (not collapsed). If I then click the G toggle, they remain open and surrounded with a yellow box, but the symbol disappears. If I click the G toggle again, they collapse and I see a G symbol on the key image. Any time I toggle groups open or collapsed after this and I do not see the G symbol when open, making it impossible to select the key image. darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] All black image with some modules
I have noticed this same behavior on MacOS. I have NOT re-ordered the modules As an example I was working on an image using tone equalizer, then opened color balance to change saturation. When I started to try and adjust individual sliders in HSL or RGBL the image went completely black. Resetting the module still left everything black. I turned the module off and the image returned to normal, as soon as I turn it on the image goes black, even without making any adjustments. Similarly, using local contrast had the same effect. It was fine then suddenly while making adjustments everything went black, not I can't even turn it on without the image going black. I have found if I switch to bilateral grid it works, but local laplacian does not. Frank Hi, > I don't know if I am doing something wrong, but from time to time I find > that some modules render the entire image all black. > Yesterday I've seen this with with the "filmic rgb", but I had this once > or twice before. Am I using it wrong (after all, I just turned it on), > or is this some bug? > Any help would be appreciated. I can of course provide the respective > photo files and perform further investigation. > Thanks, Michael darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Monitor
Am 10.01.20 um 14:16 schrieb Jesus Arocho: ... would like to know what setup darktable users have, best performance/price. EIZO Foris FS2333 23" IPS 1920x1080 Pixel 16:9 100% RGB Costs 289 EURO in 2014. This model is not available any more Calibration with "DisplayCAL" (Software) and "x-rite colormunki Smile" (Hardware). Test: https://www.chip.de/test/Eizo-Foris_FS2333-23-Zoll-TFT-Monitor-Test_139889620.html -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] OpenCL questions
Hey, I can provide some experience with a testsystem running manjaro and darktable 2.6.2 with opencl activated: I have no issues and installation is straightforward using: https://aur.archlinux.org/packages/opencl-amd/ According to the description: "OpenCL userspace driver as provided in the amdgpu-pro driver stack. This package is intended to work along with the free amdgpu stack." To install the package execute the following (I am writing this from memory maybe you need additionally install base-devel) pamac build opencl-amd Good luck, Frank Am 08.10.19 um 19:55 schrieb darkta...@911networks.com: DT 2.6.2 on Manjaro How do I install OpenCL. I have amdgpu (the open source). My hardware doesn't qualify for rocm2. I have an FX-8350 (8-cores). Has somebody already done it? Any good write up? When I was searching, everything pointed to amdgpu-pro but it's for ubuntu/debian, centos and sles not for arch/majaro darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Tag hierarchy
Niranjan is right, August is right, but I'm also right. They talk about "tags". I'm talking about "folders": DT 2.6.2 Ubuntu 18.04 collect images/tags: a group includes sub-items only when you use wildcards (..|%). collect iamges/folders: a root-folder includes sub-folders without wildcards. Frank Am 21.09.19 um 19:19 schrieb Bernhard: no - unless this has changed in recent versions of dt. In dt 2.4.4. it is as Niranjan described and has to be used as August explained. -- regards Bernhard https://www.bilddateien.de Frank J. schrieb am 21.09.19 um 18:02: Don't be confused: The behavior of tag hierarchy is different to the bevavior in "collect images / folders". If you select a root-folder you also see the images from the sub-folders without needing a wildcard. Frank Am 20.09.19 um 04:58 schrieb August Schwerdfeger: If you select a tag from the hierarchical view, it will only collect images with the exact tag that was selected ('family' in this case). If you want to show images from more than one tag at a time, you have to type a wildcard ('family|%' in this case) into the text box. -- August Schwerdfeger ... On 9/19/19 9:15 PM, Niranjan Rao wrote: ... If I have tag structure like family|member1 and family|member2, if I select member1 or member2 I see corresponding images. However if I was selecting family, I was expecting to see union of member1 and member2 set - or all the photos under family node. It does not show anything as all the images are hierarchical in this case. ... Niranjan darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Tag hierarchy
Don't be confused: The behavior of tag hierarchy is different to the bevavior in "collect images / folders". If you select a root-folder you also see the images from the sub-folders without needing a wildcard. Frank Am 20.09.19 um 04:58 schrieb August Schwerdfeger: If you select a tag from the hierarchical view, it will only collect images with the exact tag that was selected ('family' in this case). If you want to show images from more than one tag at a time, you have to type a wildcard ('family|%' in this case) into the text box. -- August Schwerdfeger ... On 9/19/19 9:15 PM, Niranjan Rao wrote: ... If I have tag structure like family|member1 and family|member2, if I select member1 or member2 I see corresponding images. However if I was selecting family, I was expecting to see union of member1 and member2 set - or all the photos under family node. It does not show anything as all the images are hierarchical in this case. ... Niranjan darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Leica d-lux 7 RWL files and starting up
Am 11.09.19 um 23:12 schrieb Georges: ... I also have a Leica d-lux 7, but cannot open, ... ... Seems, that "Leica D-LUX 7" isn't supported. https://www.darktable.org/resources/camera-support/ -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Problems when Opening Fujifilm X-T30 raw files
Am 15.08.19 um 21:21 schrieb nikted: Hello, I am using the latest Darktable for Windows version. I have a Fujifilm X-T30 camera. When try to open any photo on raw format, i get a message saying : It can't read the white balance and it fails to load the photo. Is this a known problem? Any suggestions on how to resolve it? .. Nick Hallo, you can find supported cameras on https://www.darktable.org/resources/camera-support/ I see Fujifilm X-T20, X-T3, X30, ... but no "Fujifilm X-T30". -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Customize panels?
I would like to simplify the appearance of the panels to only show the modules I actually use or, at least, move them around so my preferred modules are at the top and I can ignore the rest. For example, I never use the Metadata Editor, so how can I get rid of it? Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Problem with Import from camera (MacOS)
Darktable will not recognize my Olympus EM1 when I connect it to my iMac, but has no problem when connected to my MacBook air. Both running same version of DT. At one point I tried to get weathering to work on my iMac and messed around with gphoto2 and I suppose that could have something to do with it. gphoto2 will recognize the camera on the iMac when I enter --summary but darktable refuses to see it. I don't import directly from the camera, but I would like to understand why this does not work. I am teaching a workshop in in case someone has a similar problem... Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Lens correction setting
Am 21.02.19 um 14:09 schrieb fht233: ... This setting could be active by default (in my opinion) or not. I dont know if this would have some negative effect in some cases. I think that other software and even some cameras do it by default to produce the jpg. +1 I put on "Lens Correction" manually for nearly every single picture. It would be an improvement to have a global option like "Apply lens correction by default" - on new pictures while importing When - Camera can be detected - Lens can be detected - Focus length can be detected. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Quickly switch between photos while keeping 100% zoom
Am 08.01.19 um 19:17 schrieb Germano Massullo: In darktable I need to quickly switch between pictures, while keeping a certain zoom level, like when you zoom in darkroom mode and you change image. Is there a way to do that in lighttable mode? If not, what would you suggest me to do? Have a look at the shotcuts: https://www.darktable.org/usermanual/en/shortcuts.html "z" zooms to "full" (picture = screen). Thats ~25% (depending on camara and screen), but not 100%. "cntr + z" adds focus-detection to this. While holding "z" the arrow-keys (<-- -->) can be used to go to the next picture without loosing the full-mode. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Profiled Denoise Changes
Hey Johannes, I was kind of surprised when seeing your screenshot, been using darktable for more than a year and tested especially the noise modules BUT I cannot access that adjustment that you and David describe. darktable 2.4.4 on ubuntu 18.04.1 LTS from: http://ppa.launchpad.net/pmjdebruijn/darktable-release/ubuntu Fujifilm X100S How can I unlock(?) that feature? Thanks, Frank P.S. Also want to express my gratefulness for such a high professional open source project and the efforts the developers and the community put into it!! Am 26.11.18 um 09:41 schrieb johannes hanika: > heya, > > i can still do that with the exact same combo box as before (first > entry in the module, see screenshot below). > > does that look any different for you? > > cheers, > jo > On Sun, Nov 25, 2018 at 12:01 AM David Vincent-Jones > wrote: >> >> Is the new version of 'denoise (profiled)' still related to the camera/ISO >> profiles that were created? There does not appear to be any way to adjust >> the means through the ISO value as was previously available for push process. >> >> David >> >> >> >> darktable user mailing list to unsubscribe send a mail to >> darktable-user+unsubscr...@lists.darktable.org > > > darktable user mailing list > to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Lenscorrection with known lens not working
Am 21.11.18 um 18:29 schrieb Jean-Luc Lacroix: Your Mint version of the package liblensfun-bin that include lensfun-update-data was probably up to date but not the lens database. That's exactly what lensfun-update-data is for: update the lens *database* Cheers. Jean-Luc On 21/11/18 09:50, kneops wrote: .. I'm always keen on keeping all software up to date, therefore always update immediately as soon as Linux Mint Software Updater mentions there is an update available. But lensfun doesn't seem to be part of that. Jack I never before called "lensfun-update-data" manually. Just did it and got: "No newer database was found for last installed Lensfun." I mention, in Ubuntu software AND database are kept actual by apt. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Easy way to remove imported presets?
Am 30.09.2018 um 14:53 schrieb J Albrecht: Can’t all of this command line gobley-gook nevertheless be done in DB Browser for SQLite? In order to “kill the orphans” (ugghh) one must simply hit a couple of GUI buttons to conveniently delete the necessary rows in both tables, right? If you use the GUI, you will get no orphaned rows. The SQL in my previous Mail will not kill the orphanes but avoid getting orphanes when using the DB-Browser. To kill the orphanes after deleting in table "styles" with DB-Browser use SQL: DELETE FROM style_items WHERE NOT EXISTS (SELECT id FROM styles s WHERE s.id = styleid); -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Easy way to remove imported presets?
Am 25.09.2018 um 17:37 schrieb dt-l...@stefan-klinger.de: ... If only some of the data is deleted from a database, it might end up in an inconsistent state. Depending on the assumptions the application makes about the DB's state, this may break later. To avoid inconsistences it is possible to use functions of the database. For this case "N items related to 1 style" I suggest to add a "foreign key contraint" to ~/.config/darktable/data.db SQL: -- At first we need an index: CREATE UNIQUE INDEX styles_idx ON styles (id); -- Second we need a foreign-key-constraint: -- The easy way - like in postgreSQL - does not work in SQLite: ALTER TABLE style_items ADD FOREIGN KEY (styleid) REFERENCES styles (id) ON DELETE CASCADE; -- So we have to go the harder way: -- https://sqlite.org/lang_altertable.html PRAGMA foreign_keys=OFF; BEGIN TRANSACTION; -- SELECT type, sql FROM sqlite_master WHERE tbl_name='style_items'; CREATE TABLE new_style_items ( styleid INTEGER, num INTEGER, module INTEGER, operation VARCHAR(256), op_params BLOB, enabled INTEGER, blendop_params BLOB, blendop_version INTEGER, multi_priority INTEGER, multi_name VARCHAR(256), FOREIGN KEY(styleid) REFERENCES styles(id) ON DELETE CASCADE ); INSERT INTO new_style_items (styleid,num,module,operation,op_params,enabled, blendop_params,blendop_version,multi_priority,multi_name) SELECT styleid,num,module,operation,op_params,enabled, blendop_params,blendop_version,multi_priority,multi_name FROM style_items; DROP TABLE style_items; ALTER TABLE new_style_items RENAME TO style_items; COMMIT TRANSACTION; PRAGMA foreign_keys=ON; -- SQL End The result: Deleting a row in Table "styles" will also delete all related items in table "style_items". No orphaned rows will be left there. I did not test this change whith my primary database and darktable software, but only with a copy auf "data.db". -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] ... new Ubuntu version Bionic
Am 10.05.2018 um 23:53 schrieb Аl Воgnеr: I had big problems with Ubuntu 16.04, but now with Ubuntu 18.04 it is getting more worse. ... ..., then I changed to ppa:pmjdebruijn/darktable-unstable which is the same at the moment. ... Which experiences did you make with Bionic? Al Hi, any other experiences? I'm ready to upgrade Ubuntu 16.04 LTS to 18.04 LTS, using DT from ppa.launchpad.net/pmjdebruijn/darktable-release/ubuntu (not from unstable) Stop me, if I'm running into a trap. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] exFAT-Filesystem on SDXC-card supported?
Am 23.04.2018 um 04:37 schrieb junkyardspar...@yepmail.net: On Sun, Apr 22, 2018, at 00:34, Frank J. wrote: ... After installing "exfat-fuse" and "exfat-utils" linux can read the exfat-filesystem. But darktable still shows in the import-tab: "no supported devices found" I copied the RAW-files to a folder and imported the folder into darktable. An import directly from the card with move to a folder is not possible. Assuming your system is auto-mounting the card reader or camera, did you try pointing darktable to the mount point? -- jys The system mounts the card with a card reader. Pointing DT to the mount point is only possible with "import folder". This will leave the fotos on the card and write the moint-point-path to the database and write sidecars on the card. I would like to move the fotos from the temporarily mounted card to the ssd/hdd-part of my filesystem. This is not possible from within darktable. I have to use linux to create a folder and copy the pictures. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] exFAT-Filesystem on SDXC-card supported?
Hallo, is the exFAT-Filesystem supported by darktable? In the past I used SD-Cards up to 16 GB which are formatted whith a FAT-filesystem. My new card is a SDXC-card with 64 GB space. My camera (Olympus) formatted the card with an exFAT-filesystem. On the first import linux (Ubuntu 16.04) and Darktable (2.4.2) can't read this filesystem. After installing "exfat-fuse" and "exfat-utils" linux can read the exfat-filesystem. But darktable still shows in the import-tab: "no supported devices found" I copied the RAW-files to a folder and imported the folder into darktable. An import directly from the card with move to a folder is not possible. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Re: Mouse sensitivity
Thanks, that is very helpful. I have no idea how my computer even functioned for the last 6 years. Of course Macs are also unusable pieces of crap so that probably explains it. On Thu, Mar 1, 2018 at 8:57 AM, Henkka <henri.turpeen...@gmail.com> wrote: > Why even use the magic mouse. It's totally unusable piece of crap. > > Frank kirjoitti 1.3.2018 klo 4.36: > > 2.4.0 was never available for Mac, went straight to 2.4.1. Mouse was fine > under all previous versions. > > On Wed, Feb 21, 2018 at 2:18 PM, Frank <synapse...@gmail.com> wrote: > >> Since the upgrade to 2.4.1, I find my mouse scrolling (Apple Magic Mouse) >> to be virtually unusable. I cannot use it in darkroom panels and even >> scrolling in lighttable is so jumpy it is frustrating. Is there any >> solution other than changing my system wide mouse scroll speed? As I said, >> this is ONLY since 2.4.1 >> > > > > darktable user mailing list to unsubscribe send a mail to > darktable-user+unsubscr...@lists.darktable.org > > > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Re: Mouse sensitivity
2.4.0 was never available for Mac, went straight to 2.4.1. Mouse was fine under all previous versions. On Wed, Feb 21, 2018 at 2:18 PM, Frank <synapse...@gmail.com> wrote: > Since the upgrade to 2.4.1, I find my mouse scrolling (Apple Magic Mouse) > to be virtually unusable. I cannot use it in darkroom panels and even > scrolling in lighttable is so jumpy it is frustrating. Is there any > solution other than changing my system wide mouse scroll speed? As I said, > this is ONLY since 2.4.1 > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Mouse sensitivity
Since the upgrade to 2.4.1, I find my mouse scrolling (Apple Magic Mouse) to be virtually unusable. I cannot use it in darkroom panels and even scrolling in lighttable is so jumpy it is frustrating. Is there any solution other than changing my system wide mouse scroll speed? As I said, this is ONLY since 2.4.1 darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] darktable 2.4.0 released
Am 02.01.2018 um 22:50 schrieb Tobias Ellinghaus: > Am Dienstag, 2. Januar 2018, 20:07:08 CET schrieb Frank J.: >> Am 02.01.2018 um 11:33 schrieb Tobias Ellinghaus: >>> Am Montag, 1. Januar 2018, 14:33:50 CET schrieb Frank J.: >> ... >> >>>> Hallo, >>>> I tried to clean my cache with >>>> >>>> https://github.com/darktable-org/darktable/blob/master/tools/purge_from_cache.sh ... > > Thank you for reporting this. I believe the bug is fixed now. > >> Frank > > Tobias > > PS: Your script was up to date. I broke it. Sorry for that. > Thank you Tobias, It works now and it finds a lot of unused thumbs in the cache. PS. The second script 'purge_non_existing_images.sh' worked fine. It grabbed some Photos that are shown as scull. I removed them manually with darktable. It grabbed also some entries in the database that are not visible in darktable. Maybe my database was corrupted in a crash? I removed them with parameter "-p". Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
RE: [darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org
Hi Patrick, I have manually deleted the file from the virus chest in Avast, as well as all reference to where I had installed on the D: drive. Re-downloaded the Darktable install file, updated again the Avast program, engine and virus definitions. I have now tried re-installing to a different location with a different name. As I initially used d:\Program Files\Darktable 2.4.0\to which I have changed to d:\Program Files\Darktable\ Funnily enough the "error opening file..." Dialog box has disappeared and now the program fully installs without error. Maybe Avast has rectified something in their virus definitions but even with a file, directory and whole PC virus scan No errors or virus signature comes up. I have seen nothing else in the forums either, so, obviously it's something with me. With no errors and no virus, I guess it's very safe to say that it must have been a false positive. I am sorry to trouble you, and thanks for the advice. Regards, Frank From: Frank [mailto:frich...@dodo.com.au] Sent: Tuesday, 2 January 2018 4:28 PM To: 'Patrick Shanahan'; 'darktable-user@lists.darktable.org' Cc: 'frich...@dodo.com.au' Subject: RE: [darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org Importance: High Hello Patrick. Thank you for helping me. I went to this URL: https://www.darktable.org/install/and chose of course the Microsoft Windows option. There is no checksum that I could see from this URL. Have I missed it somewhere? The file location is listed below: https://github.com/darktable-org/darktable/releases/download/release-2.4.0/d arktable-2.4.0-win64.exe After executing the install near the end my Avast popped up a dialog box with the error code / virus as listed below. I had found something in another forum: "Thank you for letting us know the status. IDP generic means that the detection was detected by an Identity Protection detection component and it is a generalized file that got detected. This can either be a false positive as well which happened due to an out dated definitions and got fixed after updating AVG." I had initially thought it might have been a false positive, and so just required clarification. I have re-downloaded Darktable and have tried to re-install (after uninstalling previous one) but with the following error: Thanks. Kind Regards, Frank -Original Message- From: Patrick Shanahan [mailto:ptilopt...@gmail.com] On Behalf Of Patrick Shanahan Sent: Tuesday, 2 January 2018 3:01 PM To: darktable-user@lists.darktable.org Subject: Re: [darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org * Frank < <mailto:frich...@dodo.com.au> frich...@dodo.com.au> [01-01-18 22:47]: > Hi guys, > > I would like to have something clarified please, in regards to having just installed the 64bit Darktable v2.4.0 for PC. I assume by "PC" you refer to darktable v2.4.0 for "windows" ??? > My AVAST antivirus program had placed the file: libgio-2.0-0.dll into the Virus chest as it was detected as having the " IDP.Generic " virus. > > Please confirm status or advise further. if you downloaded from " <https://www.darktable.org/install/#windows> https://www.darktable.org/install/#windows;, I would say your antivirus is wrong, but I don't know what " IDP.Generic " virus is. I guess you will have to make a decision. Other people are using dt successfully, <https://www.dpreview.com/news/2776812471/free-lightroom-alternative-darktab le-is-now-available-on-windows> https://www.dpreview.com/news/2776812471/free-lightroom-alternative-darktabl e-is-now-available-on-windows was there a file signature or checksum included? did you check it? gud luk, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri <http://en.opensuse.org> http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri Registered Linux User #207535@ <http://linuxcounter.net> http://linuxcounter.net Photos: <http://wahoo.no-ip.org/piwigo> http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode darktable user mailing list to unsubscribe send a mail to <mailto:darktable-user+unsubscr...@lists.darktable.org> darktable-user+unsubscr...@lists.darktable.org --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
RE: [darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org
Hello Patrick. Thank you for helping me. I went to this URL: https://www.darktable.org/install/and chose of course the Microsoft Windows option. There is no checksum that I could see from this URL. Have I missed it somewhere? The file location is listed below: https://github.com/darktable-org/darktable/releases/download/release-2.4.0/d arktable-2.4.0-win64.exe After executing the install near the end my Avast popped up a dialog box with the error code / virus as listed below. I had found something in another forum: "Thank you for letting us know the status. IDP generic means that the detection was detected by an Identity Protection detection component and it is a generalized file that got detected. This can either be a false positive as well which happened due to an out dated definitions and got fixed after updating AVG." I had initially thought it might have been a false positive, and so just required clarification. I have re-downloaded Darktable and have tried to re-install (after uninstalling previous one) but with the following error: Thanks. Kind Regards, Frank -Original Message- From: Patrick Shanahan [mailto:ptilopt...@gmail.com] On Behalf Of Patrick Shanahan Sent: Tuesday, 2 January 2018 3:01 PM To: darktable-user@lists.darktable.org Subject: Re: [darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org * Frank < <mailto:frich...@dodo.com.au> frich...@dodo.com.au> [01-01-18 22:47]: > Hi guys, > > I would like to have something clarified please, in regards to having just installed the 64bit Darktable v2.4.0 for PC. I assume by "PC" you refer to darktable v2.4.0 for "windows" ??? > My AVAST antivirus program had placed the file: libgio-2.0-0.dll into the Virus chest as it was detected as having the " IDP.Generic " virus. > > Please confirm status or advise further. if you downloaded from " <https://www.darktable.org/install/#windows> https://www.darktable.org/install/#windows;, I would say your antivirus is wrong, but I don't know what " IDP.Generic " virus is. I guess you will have to make a decision. Other people are using dt successfully, <https://www.dpreview.com/news/2776812471/free-lightroom-alternative-darktab le-is-now-available-on-windows> https://www.dpreview.com/news/2776812471/free-lightroom-alternative-darktabl e-is-now-available-on-windows was there a file signature or checksum included? did you check it? gud luk, -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri <http://en.opensuse.org> http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri Registered Linux User #207535@ <http://linuxcounter.net> http://linuxcounter.net Photos: <http://wahoo.no-ip.org/piwigo> http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode darktable user mailing list to unsubscribe send a mail to <mailto:darktable-user+unsubscr...@lists.darktable.org> darktable-user+unsubscr...@lists.darktable.org --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] FW: Confirm subscription to darktable-user@lists.darktable.org
Hi guys, I would like to have something clarified please, in regards to having just installed the 64bit Darktable v2.4.0 for PC. My AVAST antivirus program had placed the file: libgio-2.0-0.dll into the Virus chest as it was detected as having the " IDP.Generic " virus. Please confirm status or advise further. Thank you. Regards, Frank --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] darktable 2.4.0 released
Am 26.12.2017 um 19:28 schrieb Tobias Ellinghaus: > we're proud to finally announce the new feature release of darktable, 2.4.0! ... > ## New Features And Changes > - darktable got two new helper scripts (those are not installed by default, > grab them from [the sources](https://github.com/darktable-org/darktable/tree/ > master/tools)) > - One to purge thumbnails that no longer have an associated image in the > database, Hallo, I tried to clean my cache with https://github.com/darktable-org/darktable/blob/master/tools/purge_from_cache.sh It doesn't work for me because it didn't find my cache directory. A variable part of the path is processed with 'echo "${library}" | sha1sum' in line 84. This calculates not the cache-path used from darktable. Ubuntu 16.04 Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Issue with timestamp on export - solved
Am 15.09.2017 um 20:34 schrieb Tobias Ellinghaus: > Am Freitag, 15. September 2017, 19:24:58 CEST schrieb Frank J.: >> I found, that I have to set for example >> $ exiv2 -M"set Exif.Image.DateTimeOriginal '1978-09-01 00:00:00'" \ >>dia_f037_b0[1-9].jpg >> BEFORE I import the scanned JPGs into DT. >> ... >> How can I use the values from the database-column >> "images.datetime_taken" for the filename on export? > > There is only that one source of information, so if that's not being used > then > something is wrong. Do you see your 1978 timestamp in the image information > module on darktable's left side? If yes, please upload one such image file > for > me to try. .. > Tobias Hi Tobias, yes I see the timestamp. I did some additional tests and found out what I did wrong. The separator in the date-part of the timestamp should be ":" and not "-". When I change the "Exif.Image.DateTimeOriginal" in the source-file again, then remove from DT and re-import, then the timestamp is not only visible and sortable but also translated to the german date-format. And: It is used for the $-templates on export. Sorry for the noise! My mistake. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Issue with timestamp on export
Hi, for sorting the exported JPGs by year and month, I want to include the timestamp, when the picture was taken, into the filename on export. The templates "$(EXIF_YEAR)_$(EXIF_MONTH)_$(EXIF_DAY)" from http://www.darktable.org/usermanual/ch02s03s12.html.php seemed to be right for this. This works fine for pictures (RAW, JPG) that were taken with digital cameras. But my DT-archive includes 40 years of work since I scanned all my old slides with a NIKON Coolscan 4000 ED. I found, that I have to set for example $ exiv2 -M"set Exif.Image.DateTimeOriginal '1978-09-01 00:00:00'" \ dia_f037_b0[1-9].jpg BEFORE I import the scanned JPGs into DT. Not "Exif.Image.DateTime" but only "Exif.Image.DateTimeOriginal" sets the right timestamp in the database-column "images.datetime_taken" on IMPORT. But for this scanned pictures the templates "$(EXIF_YEAR)" etc. on EXPORT do not work. It seems "import" and "export" use different exif-time-values. How can I use the values from the database-column "images.datetime_taken" for the filename on export? -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Leica D-Lux typ 109, lens correction
Am 28.07.2017 um 13:50 schrieb GianLuca Sarto: > Hello All, > > this small camera needs a strong lens correction: while out-of-camera > JPGs are fairly correct, the RAW files are appalling. > > The Lens Correction menu says "lens not found". > > Is there a way to trick DT to use Panasonic's LX100 lens correction, if > available, since it should be in many ways a clone? > > thanks for your attention, > > -Gian Hi, try to edit the lensfun-data in "/usr/share/lensfun". In file "compact-panasonic.xml" the entry Panasonic DMC-LX100 panasonicDMCLX100 2.21 Points to: panasonicDMCLX100 Add a new -File (or edit in compact-leica.xml?). Copy model "DMC-LX100" as model "Leica D-Lux typ 109" into the new file. Copy panasonicDMCLX100 into the new file. The model must match exactly the text from the exif-Data. Your changes will be erased with the next update of lensfun. Make a copy. If it works, give a ticket to the lensfun-projekt. For a while the name of my new mft-lens did not match excatly between lensfun-data and exif-data. Editing this files helped my using lens-correction in darktable until the error was fixed in lensfun. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Images edited in the last month
Am 12.07.2017 um 05:11 schrieb darkta...@911networks.com: > DT 2.2.5. > Is there a way of searching for the images edited in the last month > (date range). > ... > Any suggestion? There's no internal data to answer this question. But after editing an image the *.xmp-sidecar-file is written. Try the Linux "find"-command with search für file-date. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] tagging groups of images
Am 24.06.2017 um 21:32 schrieb Lars Kotthoff: > Hi all, > when I apply a tag to selection that contains groups of images, only the image > that is shown in the lighttable is tagged, not the entire group. Is there an > option to enable this, or is this a feature that will be supported in the > future? > Thanks, > Lars Hi, I'm a simple user, not a developer. So I don't really know, what is planned for the future. But I think the rule is very simple: As in every other programm with a Graphical User Interface (GUI) actions from mouse-clicks or shortcuts are targeted to SELECTED objects. So show the images in lighttable (icon "G" right on top of lighttable) and select them. Then apply your tag to them. Assigning tags to images, which are not selected and not even visible in the gui would lead to unattended results. It may be usefull to have different tags on the images of a group. How can this be done when all images of a group gets always (silent in the background) identical tags? Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Reset of all settings of a user
Am 10.06.2017 um 22:27 schrieb Аl Воgnеr: > How can I reset all the settings a user has made, "Settings"? You mean Program-settings? Delete or rename the file ~/.config/darktable/darktablerc > eg by deleting directories? Directories with pictures? Deleted in the filesystem or only removed from Darktable? Deleting directories is more then "settings". Restore the deleted directories from a backup. Restore also the darktable-Database from backup: ~/.config/darktable/library.db ~/.config/darktable/data.db If only removed from darktable and *.xmp still there, try import/directory. > > Al Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] I need to learn darktable.
Am 28.05.2017 um 16:02 schrieb Michael: > Is there an instruction book somewhere out there that will take you > through most or all of the modules? I found a book bu it is for a MUCH > earlier version. I would go through tutorials but I prefer the written > word. Plus I have NO idea which version is in use. > > -- > :-)~MIKE~(-: Hi Mike you know the User manual? http://www.darktable.org/resources/ PDF. Version 2.2 English, Frenc, Italian. Last program-release is 2.2.4 http://www.darktable.org/news/ -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Flickr export still Frobbed
I previously reported this in DT 2.0 series and it was supposed to be fixed in 2.2. This is still broken on the Mac in DT 2.2.4.6 >I'm getting the "Invalid Frob" error when trying to log into Flickr with > Darktable. This seems to be a problem that has been around for a long time > but I don't see a solution anywhere. Mac OS 10.12.1, Safari, DT 2.0.6 Yes, flickr yet again broke their api. the fix is in 2.2.0rc, 2.0.x will not receive any further updates and do not have the fix, darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Printing Problem Epson ABW Mode
Not Darktable specific, but useful info With special thanks to David Vincent-Jones I think I have figured out how to make printing from Darktable useful on the Mac The secret is that you need to go into the CUPS server page by pointing your browser to http://localhost:631 Once there, you can find your printer and under the menu that says Administration you will find “set default options” Within these options I found all the various quality and paper type settings from my driver. By setting these IN ADVANCE and then printing, results were as I would expect. If you try to set the options and get a message about web administration not enabled, the error message will give you a command that you simply need to cut and paste into a terminal window and execute. Hope this is helpful. I can now get acceptable prints out of DT without exporting first On Thu, Mar 16, 2017 at 2:09 PM, David Vincent-Jones <david...@gmail.com> wrote: > 'Set Default Options' in CUPS brings up 6 tabs of output variables that > can be preset ... very elaborate .. this may be what you are seeing from > your sysyem! > > On 03/16/2017 10:23 AM, Frank wrote: > > > > On Wed, Mar 15, 2017 at 12:48 PM, Pascal Obry <pas...@obry.net> wrote: > >> >> Frank, >> >> > You are correct, in the background MacOS uses CUPS so one might think >> > it would be simple, however the system GUI provides an interactive >> > tool to control all the print quality settings, paper size, etc. This >> > system print dialog never comes up on a mac when printing from DT >> >> Correct. >> >> > and when calling the CUPS options in DT, >> >> How do you call CUPS option from dt? This is not possible. >> > > OK this is strange, I cannot find this, but I know for certain that I > previously > got access to a long list of printing variables where individual > parameters > could be set by changing the value. I do not remember how I accessed > this... > Maybe that was inside Scribus when I was trying to print my Chap Book? > >> >> > the user gets a VERY long list of variables with 1-0 values which is >> > not much help. If the DT print process just handed off to the core >> > system print resources and let the print dialog function as normal, >> >> What is normal? :) >> > > Haha, fair enough! > >> >> But I'm a bit lost here. You're printing fine using another software by >> adjusting the CUPS options, correct? >> >> So, why can't you go to CUPS server, create a queue (say: dt-print), >> select the same settings that are working fine with the other software. >> > > And this is where you will lose the vast majority of Mac users. > This is no doubt possible, but I have no idea how to go about it > and none of this has any part in typical printing workflow on the Mac > >> >> Then on dt just select this print queue (dt-print) that should be 100% >> equivalent, no? >> >> > Epson only provide ICC profiles for certain high end printers. >> >> Right. And in other printer it is quite difficult to have correct >> prints. >> >> Regards, >> >> -- >> Pascal Obry / Magny Les Hameaux (78) >> >> The best way to travel is by means of imagination >> >> http://www.obry.net >> >> gpg --keyserver keys.gnupg.net --recv-key F949BD3B >> > > > > darktable user mailing list to unsubscribe send a mail to > darktable-user+unsubscr...@lists.darktable.org > > > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Printing Problem Epson ABW Mode
On Wed, Mar 15, 2017 at 12:48 PM, Pascal Obry <pas...@obry.net> wrote: > > Frank, > > > You are correct, in the background MacOS uses CUPS so one might think > > it would be simple, however the system GUI provides an interactive > > tool to control all the print quality settings, paper size, etc. This > > system print dialog never comes up on a mac when printing from DT > > Correct. > > > and when calling the CUPS options in DT, > > How do you call CUPS option from dt? This is not possible. > OK this is strange, I cannot find this, but I know for certain that I previously got access to a long list of printing variables where individual parameters could be set by changing the value. I do not remember how I accessed this... Maybe that was inside Scribus when I was trying to print my Chap Book? > > > the user gets a VERY long list of variables with 1-0 values which is > > not much help. If the DT print process just handed off to the core > > system print resources and let the print dialog function as normal, > > What is normal? :) > Haha, fair enough! > > But I'm a bit lost here. You're printing fine using another software by > adjusting the CUPS options, correct? > > So, why can't you go to CUPS server, create a queue (say: dt-print), > select the same settings that are working fine with the other software. > And this is where you will lose the vast majority of Mac users. This is no doubt possible, but I have no idea how to go about it and none of this has any part in typical printing workflow on the Mac > > Then on dt just select this print queue (dt-print) that should be 100% > equivalent, no? > > > Epson only provide ICC profiles for certain high end printers. > > Right. And in other printer it is quite difficult to have correct > prints. > > Regards, > > -- > Pascal Obry / Magny Les Hameaux (78) > > The best way to travel is by means of imagination > > http://www.obry.net > > gpg --keyserver keys.gnupg.net --recv-key F949BD3B > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Printing Problem Epson ABW Mode
You are correct, in the background MacOS uses CUPS so one might think it would be simple, however the system GUI provides an interactive tool to control all the print quality settings, paper size, etc. This system print dialog never comes up on a mac when printing from DT and when calling the CUPS options in DT, the user gets a VERY long list of variables with 1-0 values which is not much help. If the DT print process just handed off to the core system print resources and let the print dialog function as normal, there would be no problem, but I guess this is also not so simple... Epson only provide ICC profiles for certain high end printers. For consumer printers this information is, I suppose, embedded in the driver software and is not available to be used independently (I have examined the package contents and not been able to find any ICC profiles). I have used an ICC profile from another paper supplier designed for epson printers and this did allow me to get soft proofing but did not help the printing situation measurably. On Wed, Mar 15, 2017 at 10:26 AM, Pascal Obry <pas...@obry.net> wrote: > > Hello Frank, > > > This may not be true on Linux, but on the Mac it is definitely the > > case currently. > > Certainly working for me on GNU/Linux. Now there is something I don't > understand. When you print from other software on Mac you're using > CUPS, right? AFAIK CUPS is the default printing queue in Mac, in fact > CUPS is maintained by Apple if I'm not mistaken. > > So, why is dt not working for Mac? The current implementation does a a > pdf out of the image and send it as-is to CUPS as any other software > should do, no? > > Most importantly I also feel (but I'm not a Mac user so I cannot be > sure) that the .ICC for the paper that are delivered by the paper maker > should be usable on Mac, no? > > Anyway, if I'm wrong what dt should do to fix this issue? > > Regards, > > -- > Pascal Obry / Magny Les Hameaux (78) > > The best way to travel is by means of imagination > > http://www.obry.net > > gpg --keyserver keys.gnupg.net --recv-key F949BD3B > darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Printing Problem Epson ABW Mode
I am also on a Mac, and I have had no success in printing from DT. I've waded into the CUPS parameters, but without a table of settings and how they correspond to the "normal" driver settings (which I cannot find anywhere) I find it impossible to get results I am satisfied with. This is a significant drawback, but I have simply added a step to my workflow where I export a copy with all adjustments then either import this into Apple Photos for printing and sharing on social media, or print it directly from Preview or other image editing software. This uses additional storage and also creates a situation where the JPEG and processed RAW are out of sync. I've resigned to the fact that DT is strictly for raw processing (which it does extremely well) and browsing/cataloging (which is does adequately). This may not be true on Linux, but on the Mac it is definitely the case currently. darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Lighttable usability
Am 26.02.2017 um 18:05 schrieb Mikhail Trishchenkov: > Hello all. > ... > 1. Automatic film rolls: ... > 2. Rolls navigation: ... Hallo, most the time I'm working with "collect images / *folders*" rather then "collect images / film roll". That works better for me. Maybe also for you? There is an GUI option "number of folder levels to show in list" to includes some sub-folders (with your HDR ...). But there is a bug, that DT merges folders when one foldername is the beginning of another one. Example: ~/pictures/dt/2017/ ~/pictures/dt/2017_A/ If you select "2017" you also see the pics in "2017_A". I like to collect with *multiple criteria*, Example: To see wich files need to get coordinates "folder = ABC" exclude images "geotagging = tagged". Then I see only the pictures to drop on the map. I like to use *wildcards*, Example: My scanned slides are named "slide_f999_p99.jpg". Where f=Film and p=Picture in film and 99 = numbers. To find all scanned slides from one film: Collect Images: "filename = slide_f123_%". Then I "select all" and tag filmtype and camera-model, which is not in the exif-data of the scans. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] thumbnails do not match file
Am 16.01.2017 um 07:22 schrieb I. Ivanov: ... > Anybody seen this? ... > > Regards, > B Maybe you changed a lot af pictures and then ended DT before the background-processes had time to build new thumbs. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] thumbnails do not match file
Am 16.01.2017 um 18:59 schrieb I. Ivanov: ... > ... - I would remove them from there, move them on NAS > (it is actually a USB drive connected to the router) and re import the > images from this "archive" location. ... > Regards, > B I also move from SSD-Workroom to HDD-Archiv when the work is done. But I use "Selected / Move" (ausgewählte Bilder / verschieben) and not remove/reimport. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Flicker authentication problem
I'm getting the "Invalid Frob" error when trying to log into Flickr with Darktable. This seems to be a problem that has been around for a long time but I don't see a solution anywhere. Mac OS 10.12.1, Safari, DT 2.0.6 darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
[darktable-user] Activate OpenCL for AMD FirePro D300 in Ubuntu
Hallo, I installed Ubuntu 16.04 LTS on an "ashtray" [1]. This hardware has 2 powerfull GPUs. But DT did'nt find a device for "OpenCL". Which drivers must I install to get OpenCL-Support for Darktable? "radeon" ist installed now. "amdgpu-pro" is not installable, it has some conflicts. -- Frank [1] http://www.apple.com/de/mac-pro/ darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] GPS tags issue
Am 30.10.2016 um 18:32 schrieb Eildert Groeneveld: ... > > I am currently running 2.0.7 from the deBruins ppt (thanks btw) > > eg@eno:/tmp/$ exiftool L1049311.DNG|grep -i gps > GPS Version ID : 2.3.0.0 > GPS Latitude: 52 deg 33' 35.42" > GPS Longitude : 9 deg 28' 51.91" > GPS Altitude: 70.62148071 m > GPS Position: 52 deg 33' 35.42", 9 deg 28' 51.91" > > any idea of what might be going on? > > cheers > > Eildert Hallo, I set the position in the Map in Darktable. After export as JPEG your command "exiftool xxx.jpg | grep GPS" shows: GPS Version ID : 2.2.0.0 GPS Latitude : 53 deg 58' 22.08" N GPS Latitude Ref : North GPS Longitude: 14 deg 8' 47.19" E GPS Longitude Ref: East GPS Position : 53 deg 58' 22.08" N, 14 deg 8' 47.19" E Visible difference is: In your version "E" and "N" (East and North, or West and South?) is missing. lat/lon-Koordinates not even need a value, but also a direction. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] tag list
Am 14.10.2016 um 16:40 schrieb darkta...@911networks.com: > On Fri, 14 Oct 2016 11:13:21 +0200 ... > so I'd like to browse the tags. As far as I figured out, ist is not possible in Module "tagging". But typing also searches for part of the text, not only the begin. To browse the tags go to lighttable / collect images / tag. First you see the grouped tags (group|sub-group|tag). Last group is "uncategorized" where you find single-tags (without "|" ). Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Re: darktable 2.0.x library
Am 21.09.2016 um 20:00 schrieb Pascal Obry: .. > Strange since some of us have far more than 50k images. It was even > reported by a user that he had 100k images IIRC. > > Maybe he reached an issue with the "old" mipmap cache? > > Not sure, but to me dt is fast for everything. > I have nearly 50K on my system. I've no problems with watchching or developing my photos. Export or creating thumbs is a bit slow because it's only an i3 with graphics on board, no GPU. A'm working to change this soon .. Slowest part, I think, is the tagging. Maybe I'm tagging too much: place, persons, event, ... For my old slide-scans I tag also film-type and camera-model, cause they have no exif-data. DT try to give my some intelligent suggestions while tagging. For example: when I tag (the german word for) "house-cleaning", DT suggests to tag also the name of my wife ;-) - really! DT trys to analyse "pairs of tagging". The database-table "tagxtag" has 2.2 Million entries for my 45K pictures. Typing in the tag-mask seems to freeze the programm. I have to wait many seconds. I would like to switch this feature off for faster work. -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Moving darktable database to another machine
Am 18.09.2016 um 09:47 schrieb Bruce Williams: > ... > but I'm not sure where the database lives. Hi, on my Ubuntu-Linux the configurations are in ~/.config/darktable/ The Database: ~/.config/darktable/library.db The Thumbnail-Cache in /~/.cache/darktable/ will be build new when first looking at a picture. It is also possible to build all thumbs with a terminal-command: $ darktable-generate-cache -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] 360 degree panoramas
Am 15.09.2016 um 09:08 schrieb Tomas Sobek: > ... I had my bracket custom made by a friend. > It's not perfect but does the job for what I need. I started making panoramas freehand from a hill, (far away) landscape only. Then use a tripod on a place in town, with no near objects. Next I build a primitive bracket, which does it's job for a year or two. See bottom of: http://www.fotodrachen.de/nodal.htm (german text). At last I got a professional one ... But we're a bit "off toppic" here in the darktable-list ;-) -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] text too tiny to be at all readable, osx el capitan
Am 04.09.2016 um 05:25 schrieb Spinach Williams: > i don’t know what to do with this or about this but i’d really love to > be able to do a thing at all in darktable. Hi, maybe the text-size is defined in CSS - like a website. Look at file (in Ubuntu): /usr/share/darktable/darktable.css Try to replace this file from a fresh installation or from https://redmine.darktable.org/projects/darktable/repository/revisions/master/entry/data/darktable.css.in -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Few points
Am 24.07.2016 um 13:52 schrieb Kirjavainen Tero: ... > > Some why darktable using 54% of my cpu time when browsing lighttable. > First time when browsing lighttable after import, thumbs of different sizes are generated. They are cached, second time is much faster. You can seed the cache from terminal. Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] Migration from Shotwell (Ubuntu) to darktable (Mac OS 10.11.5)
Am 04.06.2016 um 18:16 schrieb Michael Hendry: .. > I had downloaded a simpler script when first looking at making the transfer, > and it crashed when there was a hierarchical tag involved. I think it was > written by Antoine Beaupré. That was my start-point. Look at line 6 of my script: # Based on an idea of Antoine Beaupre http://redmine.darktable.org/issues/9461 I think I made it a bit more comfortable. > You’re probably right, but I have found that darktable can handle a hierarchical tag and a simple tag at the same time. Yes, sure it can handle multiple *different* tags. Klick on first tag *OR* second tag finds the same picture. But importing the hierarchy from Shotwell means same tags, not different tags. Example: Shotwell seems to search with "equal". Tags are: "/persons" + "/persons/friends" + "/persons/friends/John Do" Klick on "friends" searches: WHERE tags = '/persons/friends' Darktable seems to search with SQL-"like". Tag is "persons|friends|John Do". Klick on "friends" searches: WHERE tags LIKE '/persons/friends%'. The Wildcard % includes "John Do". Wrong import: "|persons" + "|persons|friends" + "|persons|friends|John Do" The SQL-LIKE-Search find more then one Tag pointing to the same set of pictures. You have to use "SELECT DISTINCT .." to get every picture only once. > ... try to find anomalies in the tags. Ideas: - Do Ubuntu and Mac have the same coding (UTF-8)? In Germany we have some special Characters (ä,ö,ü,ß) that can cause some trouble. In Scandinavia they have some characters that I cant find on my keyboard. When transferring the SQL-file (txt) from one system to another you may use "save as ... UTF-8" in your editor. Sometimes that is a problem when copying files from Windows (ANSI) to Linux (UTF-8). Sometimes it is no Problem with characters like a-z,A-Z,0-9 but often with special/national characters. - Do you have characters in the tag, that are used in SQL: % ; ' " \ Darktable may handle this when typing it in the screen. But you put it directly into the database. > .. are you using darktable on a Mac now, or have you simple transferred from > Shotwell to darktable in a Ubuntu environment? My System is Ubuntu 14.04 LTS (waiting for Upgrade to 16.04 LTS). Shotwell and Darktable in the same environment. > Regards, > > Michael Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org
Re: [darktable-user] CreatedDate
Am 30.04.2016 um 16:56 schrieb Tobias Ellinghaus: > Am Samstag, 30. April 2016, 16:45:21 schrieb Darktable: .. >> I've corrected the all times / dates of my pictures to an hour later >> with exiftool. >> Darktable still uses the older Times / Dates. >> Is there anybody who is able to tell me what can I do to correct the >> times / dates >> or why darktable ignores the date / time correction. ... > You have to remove the files from darktable's library and reimport them. > Otherwise the changes to the original files won't be picked up. > >> Thanks to all. > > Tobias > There are different "times" in Exif. You have to change the field "DateTimeOriginal". I'm scanning my old slides and import them to darktable. The scanning-software sets the date of scanning. Before I import the files I set the date with commands like: exiv2 -M"set Exif.Image.DateTimeOriginal '1991-06-18 00:00:00'" dia_f232_b2[2-7].jpg -- Frank darktable user mailing list to unsubscribe send a mail to darktable-user+unsubscr...@lists.darktable.org