Anybody,
Why confuse a geezer?
The event times shown all over anything published by SynHak are very
confusing and hard to understand.
My ten year old went into a silent daze when she tried to tell me when the
Open House was happening.
Please translate the following data to something readable
If one or more of the SYNHAK overlords thinks it would be a good idea to
have a high resolution digital scan of the BJ article, I will be happy to
create one tomorrow and email it to the organization's designated librarian.
The scan will be in PDF format.
A reply with either a *yes, good idea*
or myself.
On Mon, Oct 28, 2013 at 8:34 PM, Philip P. Patnode ppatn...@gmail.comwrote:
If one or more of the SYNHAK overlords thinks it would be a good idea to
have a high resolution digital scan of the BJ article, I will be happy to
create one tomorrow and email it to the organization's designated
.
Does SYNHAK have a designated librarian or media drone?
PPP
--
TWIMC -- to whom it may concern
On Mon, Oct 28, 2013 at 9:45 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Chris,
OK.
I'll add your email address [ch...@chrisegeland.com] to my list of usual
suspects
-- Andrew Buczko,
The rumor swirling around is that the secret to normal, human-readable time
in all SYNHAK publications and messages is held by Torrie Fischer.
The timestamp fix in Cheetah is very easy, if one has any programming
talents.
Perhaps a bribe is in order?
Cheeseburgers are always
AB
http://www.cheetahtemplate.org/
PPP
On Wed, Oct 30, 2013 at 11:23 AM, Andrew Buczko a4s...@dsprototyping.comwrote:
Cheetah? what the hell is cheetah? I thought it was all done in C and PHP.
On Wed, Oct 30, 2013 at 8:31 AM, Philip P. Patnode ppatn...@gmail.comwrote:
-- Andrew Buczko
.
On Wed, Oct 30, 2013 at 12:01 PM, Philip P. Patnode ppatn...@gmail.com
wrote:
Justin,
What are the requirements for membership?
1. $35/month
2. living human being
3. ?
4. ?
5. ?
Thanks,
Philip
On Wed, Oct 30, 2013 at 11:59 AM, Justin Herman just
and borg cube. Then we had to different end videos
where in one, the death start was destroyed and in the other, the borg cube
was destroyed.
If you go to their web page, you can find it.
You should come down to the space sometime!
On Wed, Oct 30, 2013 at 4:31 PM, Philip P. Patnode ppatn
available at fine retailers -
[image: Inline image 1]
On Fri, Nov 1, 2013 at 7:36 AM, Ben Lippincott
benji.lippinc...@gmail.comwrote:
I wish I could upvote that, Torrie.
On Thu, Oct 31, 2013 at 8:54 PM, Torrie Fischer
tdfisc...@hackerbots.netwrote:
On Thursday, October 31, 2013
you're not doing it right ---
[image: Inline image 1]
On Wed, Nov 13, 2013 at 12:23 PM, Craig Bergdorf mm1...@gmail.com wrote:
On Wed, Nov 13, 2013 at 12:02 PM, Ben Lippincott
benji.lippinc...@gmail.com wrote:
Hey guys, the best thing about UDP jokes is that I don't care if you get
Merely a suggestion, but has anyone considered a chat room on the SH
webpage?
Check out this link for an example of a open chat session that can appear
on synhak.org at no cost to the org.
Link = http://chatango.com/creategroup?html5ts=001009234112500
Might be a good place for all off-topic
TWIMC and Torrie Fischer,
As an outsider and non-member, who is considering SYNHAK as a place to
spend some time, meet some new people, learn some new skills, and work on
my pet projects, I want to state that I fully support Torrie Fischer's
reaction to the astonishing email from BL containing an
://docs.google.com/spreadsheet/ccc?key=0Ahw1KFspeHRrdHZDYjZVYmZ1S2txTmh1RUdadjJhN2cusp=sharing
and an old Shopping list
https://docs.google.com/spreadsheet/ccc?key=0Ahw1KFspeHRrdEZHbUFMQ1ZjTW1vcVlMcVotaEs1Vmcusp=drive_web#gid=0
On Wed, Nov 20, 2013 at 11:28 AM, Philip P. Patnode
ppatn
at 10:14 AM, Philip P. Patnode ppatn...@gmail.comwrote:
@Torrie
The soldering unit is not very big. Bigger than a breadbox, smaller than
a 19in CRT TV.
It was used for many years by a certified mad lab assistant to repair
metal frames and an occasional wonky phaser weapon.
[image: Inline
Chris Alex Omar and anybody else that has an interest in a bigger
refrigerator -
If SH is willing to wait, I can probably obtain a full size refrigerator
for FREE, sometime in the near future.
Could be anytime from next week to a day in the next few months.
I have access to a location where
@Omar
Attached are a few photos of the soldering machine that is available to SH.
They have been re-sized to allow attachment to this message and not exceed
the 120 KB size restriction at SH. If you want larger images, send me your
personal email address and I will send you much bigger images.
misunderstanding, the soldering unit is definitely an interest
in having. Did anyone ask about the rack-mounts? If they are rack mounts
for servers, then yes we would like those too. Does anyone here have a
truck/van to pick these up, my car has no brakes.
On Mon, Nov 25, 2013 at 2:54 PM, Philip P
@Joe
Maybe the Principal Overseer should appoint one or two member minions to
screen items for donation.
PPP
On Mon, Nov 25, 2013 at 3:55 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Omar,
Many thanks for your prompt response and positive decision about the
soldering machine.
I
, Nov 25, 2013 at 8:10 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Monday, November 25, 2013 16:21:33 Philip P. Patnode wrote:
@Omar,
Just to be clear, you *do want* the soldering machine and both rack mount
shelves to be donated and delivered tomorrow night at/about/near 6.30pm
Torrie -
What time does the building open for the meeting tonight?
I am coming down on the bus and will be walking from wherever the bus stops
to the building.
Trying to plan my arrival so that when I get there I can come inside rather
than begin the transition from human to popsicle outside in
Torrie,
Please add my name to the list.
I am now at Level 1: I can turn the power on and I can spell l.i.n.u.x.
Would like to get to Level 5 by the end of the course.
Should I plan to over-bill a client to pay for a book or course expendables?
Keep me informed.
Philip
On Wed, Nov 27, 2013
several dressings. and utensils as well.
I'm not sure about the weenie soup, others may disagree here though.
But thats alot of lemon jello. Enough for a party of this size.
D.
--
*From:* Philip P. Patnode ppatn...@gmail.com
*To:* SYN/HAK discussion list
, November 27, 2013 7:15 PM, Philip P. Patnode
ppatn...@gmail.com wrote:
@Devin
My personal choice would be 01, a tossed salad.
Torrie gets to choose *only one from the list* , but I am sure she is
open to suggestions and majority opinion.
No need for any special utensils to deal
To all -
Let me add my personal greetings to all members, visitors, guests, and the
mysterious observer at SYNHAK for a memorable Thanksgiving Day 2013.
I hope all of you are with family and friends, having a very good meal and
sharing memories of the good times you have had over the past year.
Torrie,
As much as I enjoy casual writing, you can count me in as a contributor
and/or generic volunteer. Pick a task and point me in the right direction.
Of course, I will serve at your whim and can disappear in a moment's
notice if you are not please with my efforts.
Send me a wave and let
@Andrew
Are you saying I get a *patient* if I start the funding part of a new
product/invention process?
Sign me up for a Hawking clone, please.
This will be so cool!
On Thu, Nov 28, 2013 at 12:35 AM, alex kot alexk...@yahoo.com wrote:
I bought a Starter Kit made by OSEPP from microcenter,
the location
on their phones.
--
*From:* Philip P. Patnode ppatn...@gmail.com
*To:* SYN/HAK discussion list discuss@synhak.org
*Sent:* Thursday, November 28, 2013 9:13 PM
*Subject:* [SH-Discuss] synhak on facebook
TWIMC
Who is responsible for creating
Beth,
Alert the media - salad is coming to SH!
Send me a number that corresponds to the number carbon units who will
attend the festivities and I will fill up the required number of empty
paint cans with what should pass for salad, when viewed by the casual
observer.
As previously noted, all
TWIMC
Somebody make a FINAL decision on the day/date/time - please.
I was planning on delivering a group salad next Thursday evening, December
5th.
Now the dinner may be on Friday, December 6th?
Send a wave to all and don't back down.
Hope nobody shows up on the wrong evening because they did
and reference
material points to our facebook page. There is no need for us to hunt down
another page that so far has only served to promote us at best, does us no
harm at worst.
On Fri, Nov 29, 2013 at 2:30 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Bethany,
Will send you screen prints
Torrie,
I am in Fairview Park, just finishing up a very fine meal with some old
friends.
My apologies for not asking the right question about your proposal to meet on
a friday night from your email two days ago.
Never really dawned on me that you might be referring to THIS Friday night.
I
Suggestion -
Next time, use a conference mic and document the meeting.
The note taker can refer to the recording to make sure the minutes are
accurate and complete before posting them in an email or on the website.
PPP
On Sat, Nov 30, 2013 at 10:08 PM, Steve Radonich IV
Beth,
Salad!
I will thaw out the salad cube tomorrow (frozen solid, 1 cubic foot of
fresh lettuce, carrots, purple cabbage, and other unknown goodies) and have
it ready for delivery on Thursday at 6pm.
The cube has a net weight of 48 oz or about 1.36078 kilograms. It should
feed about 16
Beth,
Saw something I liked at the last meeting, hiding in a corner, under a
paisley sheet.
I would like to claim the vintage transporter before you toss it in the
dumpster, assuming the owner does not come and get it before the deadline.
[image: Inline image 1]
Philip
On Mon, Dec 2, 2013
All at SH,
Just sent an email to Torrie, Devin, Chris, and Omar of items available for
donation to SH this week. They got photos, you didn't.
Contact one of them if you think you might be interested in any of the
items available. Ask them to forward the photos to you.
The offer expires at 5pm
album:
http://imgur.com/a/UMb5R
Chris
On 12/2/2013 9:59 PM, Philip P. Patnode wrote:
All at SH,
Just sent an email to Torrie, Devin, Chris, and Omar of items available
for donation to SH this week. They got photos, you didn't.
Contact one of them if you think you might be interested
at
a mutually convenient time.
If anybody reading this has any questions about any of the items still
available, please send me an email and I will try to answer them promptly.
Philip
On Tue, Dec 3, 2013 at 11:47 AM, Philip P. Patnode ppatn...@gmail.comwrote:
Beth,
Yes, it is made of wood
with a note on it Claimed by
Beth M/SH.
I will bring it down to you at SH on Thursday.
Have a good evening.
PPP
On Tue, Dec 3, 2013 at 5:45 PM, Bethany Munyan beth.mun...@gmail.comwrote:
Are you bringing the box today?
On Tue, Dec 3, 2013 at 5:24 PM, Philip P. Patnode ppatn
Devin,
To solve the problem of the vibrating/moving bench grinder, I am bringing a
small cabinet to SH tonight.
The cabinet will be an ideal addition to the tool room when the bench
grinder is bolted to the top.
The cabinet is on casters and it has a full-width drawer and a large
storage area
re - rice pickup + one warm body
I will call the number now and see if I can make the pick up on my way to
SH.
Hold your breath, wait for the update...
PPP
On Thu, Dec 5, 2013 at 4:28 PM, Edward Bowen ebo...@kent.edu wrote:
Or if anybody could pick me up a little bit later, call me! (phone
To all who attended and all who brought food to the 2013 SYNHAK
Space-Giving Dinner last night -
I would like to thank everybody involved in the planning and staging of the
space-giving turkey dinner at SH last night, especially Andrew, Beth, Devin
and a few others whose names I don't know.
Since SYNHAK is now a legal 501(c)(3) org, the SketchUp Pro software may be
available as a grant from Trimble!
SketchUp Pro is the most intuitive way to design, document and communicate
ideas in 3D.
Check out this link = http://www.sketchup.com/products/sketchup-pro
The program is normally
*Suggestions for consideration by SYNHAK members -*
*To avoid confusion, disappointment, and wasting time on projects that will
never happen, I suggest that the JUNK PILE (clearly marked with a sign,
usage policy established) be separated from the RECENT DONATIONS PILE (not
marked, no policy) and
the coat
rack at the space, feel free to say otherwise.
Chris
Sent from my iPhone
On Dec 6, 2013, at 20:45, Philip P. Patnode ppatn...@gmail.com wrote:
I have a large, old (circa 1950), but still very usable, clothes rack
available for donation *and* delivery to SYNHAK.
The all-metal rack
usable for a bigger
space, I'll happily accept it.
Chris
Sent from my iPhone
On Dec 6, 2013, at 20:45, Philip P. Patnode ppatn...@gmail.com
wrote:
I have a large, old (circa 1950), but still very usable, clothes rack
available for donation and delivery to SYNHAK
, December 06, 2013 14:54:16 Philip P. Patnode wrote:
*Suggestions for consideration by SYNHAK members -*
*To avoid confusion, disappointment, and wasting time on projects that
will
never happen, I suggest that the JUNK PILE (clearly marked with a sign,
usage policy established) be separated
If Omar or anybody else at SH wants to start selling stuff on Craigslist
and eBay Classifieds (both free, both local) on a regular basis for the
benefit of SH, I will be happy to get involved and help them. I can donate
at least 4 hours a week, maybe more to the ongoing project. Properly
managed
.
On Wed, Dec 11, 2013 at 8:21 PM, Philip P. Patnode ppatn...@gmail.comwrote:
If Omar or anybody else at SH wants to start selling stuff on Craigslist
and eBay Classifieds (both free, both local) on a regular basis for the
benefit of SH, I will be happy to get involved and help them. I can
discouraged.
On Wed, Dec 11, 2013 at 9:25 PM, Philip P. Patnode ppatn...@gmail.comwrote:
You can have my warm body to use in evaluating the next batch of computer
equipment to be donated by Justin.
I will be happy to assist Omar in checking the stuff out. No problem
with gofer/asst status
I agree with Devin Wolfe that ALL donations, of any description and from
any source, should be considered as SH property by default.
IMO, all donations should follow this path =
1. *acceptance* (with documentation, if necessary)
2. *isolation* (moved to a location at SH or elsewhere (ie
Torrie, Byron, and others,
At the time I posted the comment about no hackercam in operation at SH,
about 2.25pm, there was no hackercam in operation at SH.
At least it was not showing up on my system, even if I am running Win95
with 256 MB RAM in a rusty case with a Pentium 1 chip.
Yes, the
!
On Mon, Dec 16, 2013 at 4:30 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Blame it on the marauding horde of downtown zombies.
Post an update, if it opens up tonight.
Thanks!
On Mon, Dec 16, 2013 at 4:24 PM, Bethany Munyan
beth.mun...@gmail.comwrote:
So the space should be openwhy
It may be wise to add a clause to the lease that specifically obligates the
landlord to maintain the roof and basement in good order and promptly
mitigate/repair any water leaks or water damage due to roof leaks or water
seepage through the basement walls or a main drain blockage or backup.
Also,
risk.
V/R
Tim Seeley
*From:* discuss-boun...@synhak.org [mailto:discuss-boun...@synhak.org] *On
Behalf Of *Philip P. Patnode
*Sent:* Friday, December 20, 2013 9:08 AM
*To:* SYN/HAK discussion list
*Subject:* Re: [SH-Discuss] roof and basement test opportunity
It may be wise to add
Tonight, on Christmas Eve, will there be a regular weekly meeting at 7pm?
How about next Tuesday at 7pm, New Year's Eve?
If no to both, when is the next meeting?
Happy holidays to all!
Philip
___
Discuss mailing list
Discuss@synhak.org
*Does anybody know how to repair broken cast iron?*
Can cast iron be welded?
Can cast iron be repaired with an adhesive?
Details =
I recently acquired a broken Thunderbird 20-qt commercial dough
maker/mixer. It is a table top appliance that is used in a commercial
bakery to make dough or mix
Devin,
Thanks for your prompt reply.
Welding the broken pieces will be Plan B.
You can have a shot at it, if I must get it welded. Success will earn you
a steak dinner (or whatever your brain demands as food). Failure will
require re-education and discipline in the form of 20 lashes out in
...
Today's Topics:
1. cast iron repair (Philip P. Patnode)
2. Re: cast iron repair (degerov...@yahoo.com)
3. Re: cast iron repair (Philip P. Patnode)
4. Open Hours? (Bethany Munyan)
5. Re: Open Hours? (Tiki Mclemore)
6. Re: Open Hours? (Bethany Munyan)
7. Re: Open Hours
be
room for it and it could go with the guitar that's already at the space. I
personally have no interest in it but if others do, moving day would be the
day for them to pick it up as we'd have a big truck available that day.
On Wed, Jan 1, 2014 at 9:19 PM, Philip P. Patnode ppatn
To be clear on the matter of the piano I can donate, it is available to any
person or any organization on Planet Earth.
The first entity to (1) confirm acceptance *and* (2) give me a specific day
and time to pick it up will be the lucky recipient of the piano.
I can't hold it for anybody on the
,
I know we talked about this a couple weeks ago. I can make room in my
storage unit when this snow let's up and come get it to hold for SH. I will
get back to you asap.
-Steve
--- Original Message ---
From: Philip P. Patnode ppatn...@gmail.com
Sent: January 2, 2014 2:39 PM
To: SYN/HAK
*Where is Nicole, the sheet metal jewelry maker?*
I lost the scrap of paper with Nicole's email address on it. Would like to
contact her about a small tripod I have for her. Will give it to her to
use when she photographs her jewelry creations.
If anybody at SH knows how to contact Nicole,
All at SH,
I will be happy to volunteer my time on the 18th to help pack and move
stuff.
Will bring my camera and help document the occasion with some pics over the
course of the day.
At my advanced age, I can't lift (load or unload) anything that is heavier
than about 50 lbs, but I am really
Devin,
If all goes well this weekend, and I am not abducted by the neighborhood
zombies, I will show up at 48 Summit St to help do things.
If needed/wanted, I have a Milwaukee Screw Gun available, assuming you plan
to use drywall screws to hang the board.
If needed/wanted, I have a Milwaukee
Is the SNY/HAK logo available as a PSD or JPG or PNG or AI or PDF or TIFF
file ?
If yes, please upload it somewhere and post the link.
Thanks!
On Fri, Jan 10, 2014 at 6:16 PM, Andrew Buczko a4s...@dsprototyping.comwrote:
Cool, We can have the Syn/Hak, We Make Akron moto in it too
On Fri,
TF
Thank you!
PPP
On Sat, Jan 11, 2014 at 10:01 PM, Torrie Fischer
tdfisc...@hackerbots.netwrote:
On Friday, January 10, 2014 20:54:03 Philip P. Patnode wrote:
Is the SNY/HAK logo available as a PSD or JPG or PNG or AI or PDF or TIFF
file ?
If yes, please upload it somewhere and post
TF
If you can't find a working scanner at SH, I will be happy to scan the
lease to a single PDF file. I have the software to combine scanned pages
into one file.
Will be at the new SH location tomorrow afternoon, if you want to drop off
a copy of the lease for me.
The scan can be done on
TWIMC @ SYNHAK
Was it a practical joke by SH or just a lack of common courtesy and
punctuality?
This morning, I left my apartment at 10.30am, met a friend of mine - a
retired, union-shop electrician with 35 yrs experience in commercial
electrical work - at Panera Bread in Fairlawn for coffee and
TF,
You might want to consider a programmable thermostat to control the furnace
at 48 Summit St.
Once the move has been made and a regular schedule has been re-started, the
thermostat can be set to very low temperatures during the many hours that
nobody is expected. If someone shows up, the
FYI
I have at least 10 desktop computers available for donation to SH, with
some specific conditions attached to the offer.
All were in operating condition when removed from service and replaced with
new computers.
All are Pentium 4 Class systems in a desktop tower form.
Most are generic
and these machines.
However, I may be interested in the monitor if it is a flat-panel, one
of our flat panels just went down (the Sony) and we would need to
replace/repair it, I haven't had time to look at it yet so I don't know if
it can be repaired or not.
On Mon, Jan 13, 2014 at 10:27 PM, Philip P
to offer you on your project.
PPP
On Wed, Jan 15, 2014 at 2:50 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Tuesday, January 14, 2014 17:30:04 Philip P. Patnode wrote:
All of the above,
An internet connected, programmable thermostat with buttons, a serial
connection, and auto
Just like the label on the kegs say - MOLSON.
It's Canadian!
On Wed, Jan 15, 2014 at 9:43 PM, J. F. Corner j...@5n4k3.com wrote:
The free kind!
On 1/15/2014 21:42, Steve Radicchio IV wrote:
What kind of beer is it?
--- Original Message ---
From: Philip P. Patnode ppatn
How can you resist FIVE gallons of FREE Canadian beer?
First warm body to commit to a pickup day and time gets the beer.
On Wed, Jan 15, 2014 at 9:46 PM, Steve Radonich IV nesfr...@outlook.comwrote:
Sorry didn't look at the pictures.
--- Original Message ---
From: Philip P. Patnode ppatn
SH
What is the schedule for tomorrow?
Need to know when the activity starts and if a real human will be on site
at or before that time.
Besides a warm body, what else to bring?
Please post details so I can arrange my life accordingly.
May have to cancel morning cartoons or afternoon bingo, if
Good luck!
I left my notepad with important numbers and some blank quad paper on a
table at a weekly meeting a few weeks ago and have not seen it since.
Of course, I neglected to put my name on the pad, like I used to do in
kindergarten/elementary school.
Who ever has my stuff, I hope you make
B
Give them a hint of what may be coming to encourage a reply.
P
On Fri, Jan 17, 2014 at 5:13 PM, Becca Salchak blsalc...@yahoo.com wrote:
Is any one at the new space?
___
Discuss mailing list
Discuss@synhak.org
Synhak calls the Analog Contact List. Its just a
piece of paper with people's numbers listed in case they're needed, I think
everyone on that list is a keyholder. People add themselves to the list if
they wish, there is no maintainer for it.
On Fri, Jan 17, 2014 at 5:14 PM, Philip P. Patnode
, Jan 15, 2014 at 10:24 PM, Joshua Csepegi
joshcsep...@gmail.com wrote:
Can i have the kegs our dullest one
On Jan 15, 2014 9:36 PM, Philip P. Patnode ppatn...@gmail.com
wrote:
Help!
I am in possession of two, 5.16 gallon, stainless steel beer kegs
and I don't know what to do with them
Anybody at SH who can make a decision about a rental truck -
If a rental truck is necessary to complete the move from 21 to 48, I will
be happy to send a firm quote tomorrow for a 24ft truck for use next
weekend.
The truck can picked up on Friday afternoon, used on Friday, Saturday, and
Sunday,
a day
between Sunday and Thursday, we'll get 25% off of $30 per day $0.79 per
mile 16' truck from the Budget rental place on W. Market street.
On Mon, Jan 20, 2014 at 10:02 AM, Philip P. Patnode ppatn...@gmail.com
wrote:
Decision Makers at SH,
Just received the quote from Penske Truck
:
Hey Phillip this is slightly off-topic but do you take the #1 bus from
Fairlawn? I live in Highland Square and work in Fairlawn, that's the bus I
take. I'm wondering if it goes all the way down and where you get off?
On Mon, Jan 20, 2014 at 5:17 PM, Philip P. Patnode ppatn...@gmail.comwrote
In the interest of safety, I strongly suggest that nobody is ever alone in
the space, day or night.
The *buddy system* works for divers, climbers, soldiers, and bar hoppers.
Working at SH with at least one other person on the property will increase
the level of safety for all involved.
It is
,
details wound into the walls and nailed to the ceiling, in a week
everything we leave is gone.
On Thu, Jan 23, 2014 at 10:58 PM, Philip P. Patnode ppatn...@gmail.comwrote:
In the interest of safety, I strongly suggest that nobody is ever alone
in the space, day or night.
The *buddy system
Sorry, damn keyboard!
Link = http://www.1000bulbs.com/product/8156/FC23-P3841OD.html
Only $8.34 each, in quantities of 6 or more.
On Thu, Jan 23, 2014 at 11:26 PM, Philip P. Patnode ppatn...@gmail.comwrote:
CFL flood lamp blubs are available for under $10 each.
Link =
On Thu, Jan 23
BTW, I was careful to make a suggestion, not create a policy.
On Thu, Jan 23, 2014 at 11:37 PM, Philip P. Patnode ppatn...@gmail.comwrote:
On the subject of working alone, being safe.
I knew a dentist who cut off his left hand while using a table saw,
working alone in his garage
their business.
SH is not a like a zoo, where the occupants are on display.
IMO, a peephole is far superior to a pane of glass.
On Thu, Jan 23, 2014 at 11:38 PM, Philip P. Patnode ppatn...@gmail.comwrote:
BTW, I was careful to make a suggestion, not create a policy.
On Thu, Jan 23, 2014 at 11:37 PM
Torrie is doing what she needs to do in the face of the continuing
bickering, deal making, personal agendas, ego-driven land grabs, and the
subtle obstructionism shown by some members over the floorplan.
In the face of complete chaos and a looming deadline, form a committee.
Yes, I am serious.
JH
Was that notice of a job opening?
How much does it pay and what are the hours?
Will start working on my CV while I wait for your reply.
In this economy, any job is a good job.
PPP
--- if you are referring to the appliance, then never mind
On Thu, Feb 6, 2014 at 12:25 PM, Justin Herman
;
* Subject: * Re: [SH-Discuss] another zoning proposal
* Sent: * Thu, Feb 6, 2014 7:07:38 PM
Id like to volunteer myself for the committee
On Feb 6, 2014 1:24 PM, Torrie Fischer tdfisc...@hackerbots.net wrote:
On Thursday, February 06, 2014 12:31:45 Philip P. Patnode wrote:
Torrie is doing what
into compliance.
regards,
Andrew L
On Feb 7, 2014 12:36 PM, Philip P. Patnode ppatn...@gmail.com wrote:
Andrew L
Devin and I discussed the bathrooms last night.
Nothing I am doing will interfere with future modifications to either
bathroom.
Considering that an ADA-compliant bathroom requires a 60in
Now about 6.15pm.
Too late to catch the last stagecoach to downtown and still have time to
get something done before the 8.40pm return time.
Maybe tomorrow?
Would like to continue working on the bathrooms.
On Fri, Feb 7, 2014 at 12:58 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Andrew L
...@gmail.com
wrote:
Right here for #5
On Feb 6, 2014 2:58 PM, Philip P. Patnode ppatn...@gmail.com
wrote:
So, who is going to be #5?
Torrie @ 1324
Becca @ 1407
Justin @ 1408
Devin @ 1440
#5 @ ?
Good to see that some of the members are interested
Griesacker mgriesac...@gmail.com
wrote:
I'll look for my springloaded briefcase.
On Sun, Feb 9, 2014 at 12:10 PM, Becca Salchak blsalc...@yahoo.comwrote:
I think the 7 that have stepped up is a great group. Good
representation of our needs and membership
On Feb 9, 2014 11:57 AM, Philip P
Craig,
I just missed the 5.23pm bus but will be on the 5.53pm bus to downtown.
Should arrive at SH at/about/near 6.20pm.
See you soon...
Philip
On Fri, Feb 14, 2014 at 3:54 PM, Craig Bergdorf mm1...@gmail.com wrote:
i'll be at the space at 5
On Fri, Feb 14, 2014 at 1:06 PM, Philip P
Need paint and supplies to complete the renovation of the two bathrooms.
2 - gallon, paint, white, semi-gloss (final coat for both bathrooms)
1 - roller, 9in, smooth (for final coat)
1 - roller, 2in, smooth (for trim work - primer and final coat)
1 - roller, 4in x 1in, smooth (for trim work -
If any SH member with a key plans to be at SH on Sunday (8am to 7pm ) or
Monday (8am to 9pm) or Tuesday (8am to 6pm), please post the hours in this
thread.
I can come to SH any or all three days to continue and complete the
painting in both bathrooms.
Would like to have both bathrooms finished
I will arrive about 1.20pm.
PPP
On Sun, Feb 16, 2014 at 11:33 AM, Craig Bergdorf mm1...@gmail.com wrote:
That's all, running about an hour late.
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo/discuss
...@gmail.com wrote:
If someone is there to open it I can be there till 4:00 to help.
From
Adam
On Thu, Feb 20, 2014 at 7:30 AM, Philip P. Patnode ppatn...@gmail.comwrote:
Who is coming to SH this afternoon or evening?
What time period will the the building be open and occupied?
Lots of work
after I get her home and fed. As soon as we get hours we can work
something out.
Cheers
Adam
On Thu, Feb 20, 2014 at 6:03 PM, Philip P. Patnode ppatn...@gmail.comwrote:
TWIMC
On second thought, I am not going to take the 7.04pm bus from Wallhaven
to SH because the work period will be too
1 - 100 of 250 matches
Mail list logo
