[Elecraft] FS: Built W2 with 1.8 to 54MHz 2KW Directional Coupler

I would like to sell my built W2 power meter. I find I just don't use it. Includes the 1.8 to 54MHz 2KW Directional Coupler, serial update cable, remote sensor cable, and manual. $185 shipped USPS CONUS. Price is firm. Respond off-list. Thanks Doug -- KØDXV __

Re: [Elecraft] rather provocative advert from Kenwood

I completely agree with you on the TS-830 and TS-850 - both excellent rigs and nothing Kenwood has done since comes close. I kind of liked the TS-480 but eventually sold it. I would think the TS-590 might be pretty good. It will be interesting though to see what the price comes out as. Do

Re: [Elecraft] Heil 4-pin XLR pinout

The 4-pin XLR can be obtained from cheapham.com. On 7/2/2010 5:25 PM, Joe Subich, W4TV wrote: > > But what I'm trying to find online is a place that gives the pinout > > for Heil's 4-pin XLR mic's... > > Try: http://homepage.ntlworld.com/rg4wpw/date.html > > > I'm also trying to find a

Re: [Elecraft] OT--A Suggestion About Printers

Its worth noting that a huge secondary market for ink cartridges has developed over the years. I but my cartridges off eBay for about $8 a pop. Some people (especially the printer manufacturers) claim these are inferior and may damage your printer. This is the casting of F.U.D. (Fear, Uncert

[Elecraft] K2: Problem Setting AGC Threshold

Hi Folks, I'm very leisurely building K2 6798. I've reached page 48 where I am performing "Setting the AGC Threshold". I have a confusing situation. Pin 5 of U2 reads 7.85 volts and this value does not change when R1 is adjusted. I don't see any incorrectly placed components. All solder c

Re: [Elecraft] speakers

These look really good and you can't beat the price. No we just need stereo amplifier so we can drive them from the line level output. 73, Doug -- K0DXV ac...@aol.com wrote: > Here's the Best Buy webpage for these speakers: > > _http://www.bestbuy.com/site/olspage.jsp?skuId=7314523&type=produ

Re: [Elecraft] K3: Speakers

I use a set of small Pyle speakers that I bought from buy.com for around $29 the pair. They sound great and have very good power handling for their size. Model PCB4BK. I also have the Radio Shack speaker mentioned by others as well as some Minimus 0.5 Radio Shack speakers that sound great an

Re: [Elecraft] K3 EZ and .NET

Wouldn't it be a lot simpler to just turn automatic updates off when your not in a good location? Doug -- K0DXV rfenab...@gmail.com wrote: > Ok, the reason for me not wanting the .NET software is as follows: > 1. The program will run "off line for a limited time" and then want to go to > Micros

Re: [Elecraft] Firmware Loading!

Dick, This is a common problem with applications accessing serial ports. It is very driver dependent. Doug -- K0DXV (Senior Programmer -IBM) Dick Dievendorff wrote: > I'll look into this. My intent us to Close the serial port in all exit > paths. But Close calls driver-specific routines. Is thi

[Elecraft] First K3 PSK31 Contact: VK2VFV

Very cool. After a few CQs VK2VFV returned my call. This is the first time I've tried PSK31 with the K3 and the first time in maybe 5 years I've been on PSK31. After getting some good guidance, the K3 is actually very easy to hookup and use on digital modes. Considering the poor band conditio

[Elecraft] Tips on setting transmit drive for PSK31

I'm trying to get my K3 running on PSK31. Everything seems fine so far. I'm using line in/line out into mic and headphone on my laptop. Copy is very good. Transmit drive is touchy and I'm wondering if anyone has any tips on setting the correct amount of audio drive. My power is set to 20 watt

[Elecraft] LC Back lighting & location of new K3 mods

Where would I find the details for the mods that are required for the new firmware? Also, what is the source of the LCD panel back lighting? I hope the answer is LEDs. I like to just let the K3 stay on all day and I'm hoping I'm not running down the back lighting bulbs. If they're LEDs then i

[Elecraft] KX1 problems

Just finished my KX1. Unfortunately, it won't produce any output on transmit. Receive is excellent. Toroids are solid. Board was carefully inspected with good magnifier. All solder joints are solid and clean. I get the following voltages in "tun" mode: Q6: B=0v C=12.67v E=0v Q5: C=12.67v B=1.0

Re: [Elecraft] "Standard" paddle settings

I've been operating left-handed with dots on the fore-finger since the early 60's when my dad built a tube based Heathkit keyer. I can comfortably send 25 WPM without even thinking about what my fingers are doing. I'm sure there's a point to encouraging newbies to learn the "right" way. But i

[Elecraft] K3/P3 feature: PSK31

Lot's of great ideas on the P3 feature list. My personal preference would be a plugin keyboard and the ability to operate PSK31 (and possibly other modes) using the K3/P3. I hate turning a computer on next to my gear and the monitor takes up a lot of room. 73, Doug -- K0DXV Kjeld Holm wrote: >

Re: [Elecraft] P3 high-quality photos to be posted tonight ( from Elecraft)

Eric, Beautiful. Everything I could ever want. Sign me up. I can't wait. Doug -- K0DXV Eric Swartz -WA6HHQ, Elecraft wrote: > Here's a larger shot of the P3 and K3 we took in the room tonight. (You > may need to resize it in your browser.) > > http://www.elecraft.com/K3/pics/P3%20w%20K3%20a.J

Re: [Elecraft] QSK options inquiry

Who sells the Acom 1010? Can't find any dealers with a google search. Sure looks nice. Doug -- K0DXV Rick Tavan N6XI wrote: > Dunno about the 1010 but the ACOM 1000 works beautifully with my K3 on full > QSK. I think but am not sure that the 1010 is just a recent update of the > 1000. At any ra

Re: [Elecraft] P3 Info!

Wayne, I would vote for an included internal speaker since this would add minimal cost and make available an optional power supply. Doug -- K0DXV Gordan Hribar wrote: > From: wayne burdick <[EMAIL PROTECTED]> > Date: April 28, 2007 11:25:51 AM PDT > To: Elecraft Reflector > Subject: K3 and its

[Elecraft] Calibrating K3 Wattmeter

On page 49 of the K3 Owners there is a procedure for calibrating the K3's watt meter. The 6th step reads "Hold TUNE; adjust menu parameter for a reading of 5.0 on the external watt meter". My question is adjust WHAT to adjust the menu parameter. Certainly not the main tuning like how every ot

Re: [Elecraft] Off-Topic: CW sending vs. receiving speed

I sure can relate to that. I can send wonderful code at 25 WPM but simply cannot copy anywhere near that. I'm trying a new technique. I'm going to copy received code by typing it on my computer. I can type an easy 60-70 WPM so I'm hoping that by putting down the pencil and banging on the keyb

Re: [Elecraft] Off-Topic: CW sending vs. recieving speed

Not sure I agree. I can send 25 WPM with a decent straight key and 30-35 with a good iambic paddle. However, I can only comfortably copy 15 WPM. I have a lot of trouble with stations that just need to send at 20 WPM. I just can't quite manage that speed. Doug -- K0DXV k8dd. wrote: > dw wrot

Re: [Elecraft] Dilemma: K1 or KX1 - I can't decide

negligible. > > What do I miss on the K1? The primary thing is 15 meters. I wish I could > get that on the KX-1, but I think I will build a MFJ Cub to cover that band. > > At any rate, you will have fun building and operating the rig no matter > which way you go.

[Elecraft] Dilemma: K1 or KX1 - I can't decide

While I hang around the recovering from my back surgery and a nasty case of pneumonia, I've run out of projects that require melting solder. This of course means its time to order another kit. After spending hours (I have lots of time) researching kits, I, naturally, arrived back at Elecraft

Re: [Elecraft] Magnetic Loop antenna...off Elecraft topic

All I can say is: WOW. Doug -- K0DXV Augie Hansen wrote: > Stan Jacox wrote: > >> ... >> I found a small plumbing shop open late and bought 4 meters of 1/2in copper >> tubing and made a loop this evening. I had no high voltage capacitors so cut >> various lengths of RG-58A to use as coax caps

Re: [Elecraft] K3 and SM-20 mic

I use an SM-8 which is similar. I get wonderful audio reports and I'm very pleased with its operation. I'm sure the SM-20 will work well. Doug -- K0DXV Michael M. Raskin wrote: > Anyone using the K3 and the ICOM SM-20 mic? What desk mic is good to use > with the K3? Anyone try different comb

Re: [Elecraft] Magnetic Loops

Just for fun once, I decided to make the smallest possible antenna and see if I could make any contacts. I wound about 30 week of #12 solid insulated wire around a 3/4" PVC pipe. Parallel to it and electrically in series, I created a tunable tubular capacitor using copper pipe and a threaded br

Re: [Elecraft] Magnetic Loops

I have an old AEA loop in my garage attic. It functions very effectively. The bandwidth on 20 is no more than 10Khz or less. But signal reports and reception are only slightly lower than my full-size dipoles. When you get the feel for using it you can retune in seconds using just your ear an

Re: [Elecraft] PowerSDR-IF/IQ

Standard 15" LCD monitors with a resolution of 1024 x 768 are available on eBay for next to nothing ( less than $50 shipped). Your next best choice would be a modern 15.6" monitor with a resolution of 1366 x 768. My local Walmart carries a decent one for only $98. Consumer tastes are leanin

[Elecraft] New K3 Running beautifully

I'm happy to report that K3/100 #3294 is running superbly. This is my second K3 - the first was #77. The 756Pro3 is now back it its box and in the storage room. I must say, though, that the spectrum display on the pro is excellent. I feel sort of blinded without it. Being able to actually

Re: [Elecraft] Curious problem after installing KPA3 and KAT3

I removed the KAT3 and reinstalled the KANT3. SWR now normal. Doug -- K0DXV > > > > At 22:59 07/27/2009, you wrote: >> Hi Folks, >> >> Installing the KPA3 and KAT3 is pretty straight forward. That's why I >> don't understand what's wrong. Looks like ANT1 and ANT2 are both open. >> I can see the

Re: [Elecraft] Curious problem after installing KPA3 and KAT3

Yes, of course. And verified the dummy load was working correctly with an MFJ 259. N5GE wrote: > Doug Person wrote: >> Hi Folks, >> >> Installing the KPA3 and KAT3 is pretty straight forward. That's why >> I don't understand what's wrong. Looks li

[Elecraft] Curious problem after installing KPA3 and KAT3

Hi Folks, Installing the KPA3 and KAT3 is pretty straight forward. That's why I don't understand what's wrong. Looks like ANT1 and ANT2 are both open. I can see the leads physically connected in the right order to the KAT3. The KAT3 is enabled in the menu, as is the KPA3. But when I tried

Re: [Elecraft] Adieu

I've built a K1, a KX1, 2 K2's and 2 K3's. Between each build was a period of interest in other rigs. I just now finished my second K3. I always come back. There's something about an Elecraft rig on the desk that provides a kind of satisfaction that somehow can't be easily defined nor easily

Re: [Elecraft] WD6DBM Builds for the Cycle

I can relate to that. A few weeks ago I had a complicated spinal procedure performed. Recovery is a slow process and the outcome will not be clear for a few more weeks. Last weekend the proper solution to my post-operative doldrums solidified in my head and I quickly ordered a K3 kit along w

Re: [Elecraft] For All CW Enthusiasts...

Wow. She's really amazing. On your point Grant, to each, his/her own approach... What ever makes you happy and most efficient. Being a professional computer programmer, I see as art good code that can accurately decode the broad variety of "fists" - be they electronically computer generated

Re: [Elecraft] LP-Pan vs K3 unit

I think having all these features can only be economically implemented with an external computer. For me, I only wish for a real panoramic display in color with adjustable bandwidth. Having the ability to "see" the band offers such a significant advantage that I feel quite blind without it.

Re: [Elecraft] K3 and amplifiers such as ALS-600

Monty, Actually, I have a new one. And I have an MFJ-994B auto-tuner in front of it. My current main rig is an Icom IC756Pro3 - which I love. I had an early K3 and when the economy tanked I had to sell it. Now that I'm back on a more even footing I decided I can't live without another K3.

Re: [Elecraft] KAT3 Specs

Thanks for the input Ron. The open-wire fed antenna has really captured my interest. I have not had any luck get the 90' antenna to load on 80/75 meters. My balun us switchable between 1:1 and 1:4. I just switched it to 1:1 after reading about baluns on the DX Engineering website. Perhaps

[Elecraft] K3 and amplifiers such as ALS-600

I was wondering if anyone has used the K3 with the Ameritron ALS-600. Any issues, gotchas, etc? Doug -- K0DXV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] KAT3 Specs

I was looking for the specs for the KAT3 tuner option for the K3. Just wondering what the tuning range is and if it will fully replace the LDG AT-200 I'm currently using. After years of coax fed dipoles I finally got around to experimenting with open wire fed dipoles. I'm quite impressed wit

Re: [Elecraft] Pro11/111 vs K3

Current price of the Icom IC756ProIII is 2699.00. And what's wrong with discussing price/performance comparisons of the K3 VS: other mainstream and popular rigs? Sure beats the constant debate on Elecraft's ability to meet shipping schedules. Doug -- K0DXV Dave G. wrote: First let me sta

Re: [Elecraft] PRO II vs K2

Four times?? A K2 with enough options to make it comparable to an IC-756ProIII is $1861.00. The current best price on the IC-756ProIII is 2695.00 - that's not even twice, its only 30% more. Considering the the time invested in building one - the K2 is not even close to an economical radio. The

[Elecraft] Open to Offers for K3/100 #77

I am open to offers for K3/100 #77 with KAT3 and KFL3A-500 filter. The K3 is flawless - everything works perfectly - no marks - like new. Latest firmware updates. I can provide photos to those interested. I am facing considerable medical expenses in the very near future. Doug -- K0DXV __

Re: [Elecraft] K3 VOX

The cool part is that I can plug my $8 computer headset into the K3, switch to VOX and sit back in my chair and not touch a thing. My contacts have stated that my cheap headset does not have quite the sound quality of my Heil #5, but that it sure is decent enough for a rag chew. I agree. The V

[Elecraft] Key Paddle Kits

Thanks for everyone's comments. The Black Widow seems like a great deal so I ordered one. I have collection of keys none of which I'm very happy with. Most are on ebay right now and not getting much attention. I hope to end up with a nice, light compact key with good action and heavy one tha

Re: [Elecraft] Key paddle kits?

How can you beat that price? ($69) and you get to *build* it!! tnx & 73, Doug -- K0DXV Jim Wilson wrote: Try www.w5jh.net Jerry makes a nice paddle kit called the "Black Widow" . An interesting and inexpensive design. jim, wtmhl At 05:36 PM 1/24/2008, you wrote: Doe

[Elecraft] Key paddle kits?

Does nayone recall a company that makes keyyer paddle kits? I recall a flurry of comments on various paddles and one that I looked over was actually a kit for a very reasonable price. I can't seem to turn it up on a google search. tnx, Doug -- K0DXV _

Re: [Elecraft] So you think your K3 got special treatment?

Eric, Your Cessna looks pretty new. Can you share some details on its vintage and options? Fellow Cessna lovers would like to know these details... 73, Doug -- K0DXV Eric Swartz - WA6HHQ, Elecraft wrote: The in-flight photo was taken by a pilot friend and professional photographer, Dan Daw

Re: [Elecraft] Re: build rate?

Regarding the amps, I gave up, at least temporarily, and bought an Ameritron ALS-600. I expect to sell it on ebay when the Elecraft amps are released. Not pushing or trying to start another firestorm, but sure would love to hear what the status is on them. Doug -- K0DXV David J Windisch wro

Re: [Elecraft] Shipping,second receivers etc, etc

My sentiments as well. Your choices are clear. Be patient or find something else to obsess over. Doug -- K0DXV Nick Henwood wrote: Dear critics,believers,pious preachers,flag wavers etc. Sure there are others like me who have a view but are now bored to death with this reflector. Please give

[Elecraft] Contemplating new power supply

I've been clearing the store room of the decades of accumulated radio-related items. I've done well on eBay. And now its time to replace a few critical items. I'm wondering what you guys think is about the best power supply for the money for my K3/100. Right now I'm thinking the Alinco DM-3

Re: [Elecraft] K2/100 + KAT100 + Cushcradt R8 Vertical

Phil and all, Sorry, I was thinking of the R7 - the R8 is still in production. 73, Doug -- K0DXV Phil Kane wrote: I am contemplating replacing my B&W Wideband Folded Dipole with a Cushcraft R8, the successor to the R7, as my "main" HF antenna. The B&W is best described as a resistor wit

Re: [Elecraft] K2/100 + KAT100 + Cushcradt R8 Vertical

Phil, The R8 has been discontinued for some time so I assume you have a line on a used one. There has been some issues with getting parts for the older Cushcraft verticals. I've had most of the so-called no-radial verticals and the Cushcraft is more or less the middle of the pack. I found th

Re: [Elecraft] FS: Astron 4 AMP Linear Power Supply

The Astron power supply has been spoken for. Thanks, Doug -- K0DXV Doug Person wrote: I'm cleaning out my shack. Many things are going out on eBay. This power supply is perfect for the K2 QRP version (as wells as the K1 and KX1) so I thought I would posted it here before listing it. 4

[Elecraft] FS: Astron 4 AMP Linear Power Supply

I'm cleaning out my shack. Many things are going out on eBay. This power supply is perfect for the K2 QRP version (as wells as the K1 and KX1) so I thought I would posted it here before listing it. 4 amps continous, 5 amps peak. Old-fashioned transformer-based power supply. Very well made and

Re: [Elecraft] Happy New Year

Happy New Year to all from the chilly west slope of the Rocky Mountains in Colorado. 73, Doug -- K0DXV Dave Wilburn wrote: Don Wilhelm wrote: I know this is 3 hours early for those on the left coast, but we greeted 2008 a few minutes ago here in North Carolina. Best wishes for a Happy and

[Elecraft] Switching requirements of SB-200?

Is anyone familiar with the SB-200 and its switching requirements? Is it something the K3 can handle? Thanks & 73, Doug -- K0DXV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (

Re: [Elecraft] Which Heil Prosets should we carry?

I get glowing reports on my K3 audio with the HC5 element. It would be very nice to have a K3-compatible plug-n-play desk mic with the HC5 element. Also, I've had a bit of trouble finding 8-pin foster mic plugs. This might be a nice thing for Elecraft to stock. 73, Doug -- K0DXV Eric Swartz

[Elecraft] For Sale: Unbuilt KDSP2

Brand new, unbuilt KDSP2 direct from Elecraft. After working with my K3 I decided not to go with the KDSP2 in the K2. US$200 shipped USPS Priority Mail. PayPal preferred to [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net

[Elecraft] FS: Unbuilt KDPS2

Since I got my K3, I'm not inclined to build the KDSP2 for my K2 (which I may soon sell as well). Offering my unbuilt KDSP2 kit for $200 shipped CONUS via USPS PriorityMail. Tnx, 73, es Merry Christmas Doug -- K0DXV ___ Elecraft mailing list Post to:

Re: [Elecraft] On a more technical note.....

I must admit I placed a dab of thermal grease on each of the LPA final transistors. I couldn't help myself. Probably doesn't need it. But I certainly feel better knowing that the thermal transfer will be just a tad more efficient. Doug -- K0DXV K3/100 #77 Ron D'Eau Claire wrote: Another O

[Elecraft] A nice serial cable for the K3

All Electronics ( www.allelectronics.com ) catalog # SRC-1. Only $4.00. A very nicely made serial cable. Works perfect with the K3. Has RFI ferrites on both ends. Doug -- K0DXV ___ Elecraft mailing list Post to: E

Re: [Elecraft] Thoughts on additional K3 feature

speculation at this point. :-) We -do- plan to allow users to use the 'KY' serial command to send text to the K3's PSK encoder in a future K3 f/w release. 73, Eric WA6HHQ _..._ Doug Person wrote: Too bad they didn't use the same standard mini-din used on virtually all pc ke

Re: [Elecraft] Thoughts on additional K3 feature

ected to the K3 :-) On 28/11/07 16:36, "Doug Person" <[EMAIL PROTECTED]> sent: One thing I would like to see is a way to send text to the K3 that is then sent as PSK31. Currently you can do this by sending morse with a key. But, being able to send text directly through the se

[Elecraft] Thoughts on additional K3 feature

One thing I would like to see is a way to send text to the K3 that is then sent as PSK31. Currently you can do this by sending morse with a key. But, being able to send text directly through the serial port would allow simple keyboard operation from a terminal program. Doug -- K0DXV K2/100 #

Re: [Elecraft] K3 Curious behavior

OFF Thanks to Gary from Elecraft for this info ! After that you will be able to adjust mic gain. Thomas, DM7TN #78 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Person Sent: Tuesday, November 27, 2007 12:28 AM To: Elecraft Discussion List Subject:

[Elecraft] K3 Curious behavior

When in mode LSB Mic doesn't adjust mic gain. VFO B displays "TN1 x.x" when I turn the Mic pot. Seems odd. Doug -- K0DXV K3/100 #77 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber I

Re: [Elecraft] Choosing headset

Any good quality headset made for computer use will work just fine. You literally can plug-and-play into the jacks on the back of the rig. I hooked up a foot switch and alternate between that and vox with ease using a very inexpensive set of headphones I bought from AllElectronics. Doug -- K0

Re: [Elecraft] Heil mic question

Ken, My Heil is working with the K3 just fine. No problems getting enough drive. Doug -- K0DXV K3/100 #77 Ken Kopp wrote: I have made an adapter cable for connecting my several ICOM mics to my K3 and they all work well. I have a Heil GM-4/5 "Goldline" desk mic and I have an uneasy feeling tha

[Elecraft] Computer-based PSK31 with K3

Has anyone tried to use DgiPan or WinPSK with the K3? I'm in Data Mode A, PTT set to DTR and RTS, input to line-in. Clicking transmit on either program - the K3 will not go into transmit mode. Both programs configured to use RTS and/or DTR to key the rig. Ocasionally, I see the transmit LED fl

[Elecraft] Computer type headsets with the K3

On my last order to my favorite computer parts vendor I added an inexpensive ($9.00) computer-type headset with mic. These turned out to be somewhat cheaply made - but not bad, with good sound quality and are reasonably comfortable. I plugged them into the K3, set the appropriate parameters a

Re: [Elecraft] K3 - Noise reduction gone in v1.42 firmware update?

Dave, I made the same observation yesterday after loading the new firmware. I press NR and get N/A in the display. 73, Doug -- K0DXV K3/100 #77 Dave G4AON wrote: I don't know if it's something I've done, or if it's the latest firmware, but somehow I've lost my noise reduction function! Can

Re: [Elecraft] K3 #77 yet another problem

calbration on all bands? For me, that was the problem. Also check the MIC SEL setting for r.H instead of r.L if you need more mic gain. Leigh/WA5ZNU On Thu, 22 Nov 2007 1:36 pm, Doug Person wrote: Again, maybe I missed something - but this seems pretty straightforward. Plugged a mic into the back mic

[Elecraft] K3 #77 yet another problem

Again, maybe I missed something - but this seems pretty straightforward. Plugged a mic into the back mic jack, set bias, vox gain and anti-vox. All seems correct. and the vox kicks transmitter on perfectly. If I hit tune button I get full 100 watts out. But if I speak into the mic I get maybe

Re: [Elecraft] K3 #77 KPA3 Problem

Dave- you are "'da man" (to use a quaint American expression). Yes, that is an easy mistake to make and a quick twist past all the other options brought me to the other "PA nor". Thanks so much es 73, Doug -- K0DXV K3/100 #77 Dave G4AON wrote: Further to Wayne's reply, make sure it's not "PA

[Elecraft] K3 #77 KPA3 Problem

I installed the KPA3 thins morning. Everything looks right but I can't adjust power output beyond 12.0. Has anyone installed a KPA3? Could I be missing something? KPA3 CONFIG option is set to "nor". I get a distinct click when I switch the option to "tst" and the fans work fine. Doug -- K0

Re: [Elecraft] K3 assembly photos

Nice pics. Nice station. Hopefully the Icom will move to the side and the K3 will take center-stage. here is my 'contribution' to the assembly photos http://albums.photo.epson.com/j/ViewPhoto?u=1771119&a=32611738&p=75992458 ___ Elecraft m

[Elecraft] K3 #77 Status

K3/100 #77 has made it to the power-on test. The nice amber glow of LCD display was very gratifying. Hopefully, I'll finish up tomorrow and put it on the air. Doug -- K0DXV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subs

[Elecraft] Serial Number 77 now underway in Clark, Colorado

K3/100 s/n 77 Status: I couldn't have asked for a better serial number. Guess I'll be up late tonight. I can hear my boss now saying "You got a K-what? and that's more important than your project?". "Yup. I'll need the next couple of days off..." Doug -- K0DXV

[Elecraft] K3 Arrived in Clark CO

Its here - but haven't yet figured out where the serial number is. Can someone give me a hint? tnx - Doug -- K0DXV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change,

Re: [Elecraft] Transmission line loss

The bigger difference between RG-8X and 9914 is power handling capacity. Also, there are some low-loss RG-8X cables out there that cut the loss difference by half again. I bought a 500' spool at a hamfest some years ago. It's double shielded. I've used short runs to UHF antennas for satelli

Re: [Elecraft] Can a R5 vertical be ground mounted??

The R5 can be ground-mounted. It will exhibit very acceptable SWR across all of its 5 bands when mounted close to the ground. However, my experience has been that elevation increases its effectiveness proportionate to its height. Going from ground height to 25 feet improved signals by about

Re: [Elecraft] OT: pwr rating of RG6, etc

Actually, I've found Icoms to be much more tolerant of SWR issues then Yaesu. When you consider that most (90% or more?) recent rigs have built in antenna tuners that can match up to 150 ohms minimum, the idea of 72 VS: 52 seems trivially unimportant. Mike S wrote: At 10:16 AM 11/13/2007, S

Re: [Elecraft] Co-ax for the K2

use the cable jacket that is rated for UV protection. 73, Don W3FPR Doug Person wrote: There are many types of cable designated RG-6 and RG-59. Many are not designed to handle rf voltages typical of ham transmissions. My suggestion is to be *careful* what you select. Good quality RG-59, t

Re: [Elecraft] Co-ax for the K2

e not talking about what the cable companies are using - we're talking about what you can buy at Wal-Mart or Home Depot. Doug -- K0DXV Mike Fatchett W0MU wrote: HUH??? So cable companies are not transmitting down those lines? RG-6 cable can handle about 800 watts at 50mhz. On 11/12/07 6:00

Re: [Elecraft] Co-ax for the K2

I would be very careful about only using coax that is rated for RF transmission. TV/CATV type RG-6 and RG-59 are designed for VHF/UHF reception only. Doug -- K0DXV Kenneth E. Harker wrote: On Mon, Nov 12, 2007 at 03:50:14PM -0800, Art Horne wrote: Greetings, Can anyone recommend a W

Re: [Elecraft] Re: K3 text-to-terminal details

turned in "chunks" within a "TT" report (e.g. TT[a string of N characters];)? 73, ... Joe, W4TV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Tuesday, November 06, 2007 9:13 PM To: Doug Person Cc: elecraft@mai

Re: [Elecraft] K3: An Observation for Struggling Brass-Pounders

I'm curious - does the K3 send the decoded text through the serial port where it might be displayed in a terminal program? Doug -- K0DXV Ron D'Eau Claire wrote: Today I had a few minutes to scan 20 meters with the K3. I heard a slow, hesitant fist calling CQ on 14057, so I grabbed my trusty J-

[Elecraft] K2 Experience with SM-8 and Heil HM-I Microphones

I'm just about complete with KSB2. I'm thinking of setting the K2 up for either the Icom SM-8 or the Heil HM-I mics. Looking at the chart on page18 of the assembly manual - neither are listed. Does anyone know if the setup for these mics is the same as the other Icom mics shown in Table 2?

Re: [Elecraft] K3 in the marketplace

And then there are those of use who are professional usability engineers... Having met and talked at length with both Wayne and Eric on several occasions, I suspect that they both know what they're doing. Being "intuitively obvious" is always the goal but rarely achieved in practice. And oft

Re: [Elecraft] Attaching Anderson PowerPole connetors (WAS: K2 power cables source)

I maintain my own fleet of radios as well as those of the fire department in which I am the Safety and Comm Officer. The wildland fire fighting vehicles probably subject the equipment and connections to the worst case scenario for vibration. I've learned to use a small butane torch to solder t

Re: [Elecraft] Spilling the HF beans .....

Bill Gates has written lots of code. He is (or at least was) a truly outstanding programmer. Years ago he was known to review code, find something he didn't like and call up the programmer and give 'em hell. MS Programmers have also been known to suddenly receive bonuses as stock options bec

Re: [Elecraft] Contest Reflections

To some degree there is a bit of speed snobbery out there. I too am comfortable as 13-15 wpm. Too often, someone will return on my cq at about 20. I do my best but it just isn't fun. I can't copy in my head and I have arthritis in my hands and can't write faster than about 15. The best solu

Re: [Elecraft] SMT & Possible K1 Filter Board Combinations

Based on the apparent success of the K3, the future may hold many tantalizing prospects. Perhaps a similar SMT approach to the K1 might manifest itself as a K1A with full 80 (or even 160?) to 10 coverage. Personally, I would love to see a 5 or 10 watt multiband SSB and digital mode transceive

Re: [Elecraft] K3 no-soldering kit: response to several comments

Speaking for myself, I'm very pleased with the approach you've taken. While my soldering skills are excellent and I enjoy the building process very much, SMD's are out of the question for me. In the case of the K3, I save a few hundred $ doing the mechanical assembly - which is great - glad t

Re: [Elecraft] 73 Mag

Doug, Ah, how well I relate. I wrote 4 articles for 73. It took a year to get payment for the first two and then only because Wayne wanted my next two. These last two I never got a dime for because 73 folded. I figure I made about $5 and hour for my articles. Hardly worth it. There was a

Re: [Elecraft] RE:MARS

Interesting to see some old Navy Mars call signs. Been a long time... Doug - K0DXV - Ex-Navy Mars N0EOC Bob Nielsen wrote: The MARS callsigns have changed a bit over the years. At one time they used prefixes which are now allocated to amateur radio. Bob, N7XY ex- AF6SWE - Air Force Mars (

[Elecraft] Roofing filters

Pardon my ignorance... I'm not completely clear on what a roofing filter is. I understand traditional filters that control the passband and DSP that also controls the passband through software means. But what exactly is meant by a roofing filter? How is it different then say the crystal CW

Re: [Elecraft] PC Anywhere...

ron wrote: [EMAIL PROTECTED] wrote: Hello Everyone, Perchance has anyone on the list tried remote control of his/her K2 (e/w a KIO2 accessory) using PC Anywhere as described in the April, 2007 QST? I tried to run PC anywhere ver 11 but it won't run on my vista. I need to splurge 200 b

Re: [Elecraft] W3FPR- Super Don

This is the kind of attitude that expresses the very best of the spirit of ham radio. Building and then operating a K2 is a truly rewarding activity. Being a member of a world-wide community that provides a endless supply of support, encourage and recognition provides the lesser experienced a

<    1   2   3   4   5   >