Hi,
Yes - I have read some of the previous threads but am still confused re Split
working...
I need to monitor the FSK441 calling frequency of 144.370 on my K3 / tvtr
combo. Then, when I see on the ON4KST chatroom that the other station is
monitoring say 144.380 to be able to set the rig up to
Peter,
Turn on SPLIT - you will see that the little TX arrow to the right of
the display now points to VFO B (It was pointing at A before engaging
SPLIT).
That arrow tells you which VFO will be used for transmit.
Turn the VFO B knob to the frequency you want to use for transmit.
If you have
Someone made what I thought was a really good suggestion. I think it got lost
in the noise. I wish I could remember who made it.
Fix not being able to change modes while in split. How about it Wayne?
73, Mike NF4L
__
Elecraft mailing
WB6PSE has it right--the op should pay more attention and learn the use of the
K3.
And, power poles are fine when assembled correctly.
Enough, please!
73, Steve, K4FJ
k3 #290 and #7155
__
Elecraft mailing list
Home:
It never cease to amaze me how you learn something new about our radios
everyday. I always used a sound card previously and always thought split was
disabled in data a!
Tom
On Nov 12, 2014 9:30 PM, Jim Brown j...@audiosystemsgroup.com wrote:
John said:
Elecraft K3 remembers the MODE per
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the equalization stuff and
would allow WSJT to do split as needed.
jim ab3cv
__
Elecraft mailing list
Home:
On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller j...@jtmiller.com wrote:
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the equalization stuff and
would allow WSJT to do split as needed.
... about setting Transceiver to
Thanks!!!
73
jim
ab3cv
On Wed, Nov 12, 2014 at 8:50 PM, John Nogatch jnoga...@gmail.com wrote:
On Thu, Nov 13, 2014 at 1:45 AM, Jim Miller j...@jtmiller.com wrote:
Is there a technical reason why split isn't available in DATA-A?
It would be nice to use since DATA-A nukes all the
Jim,
Since most soundcard data applications will allow the TX frequency and
the RX frequency to be different on the waterfall, there is usually no
need to put the K3 into split mode unless the offset is greater than the
2.7 kHz bandpass. Check your WJST software to see if it can lock the TX
John said:
Elecraft K3 remembers the MODE per VFO; when it says SPLIT N/A, it
is because VFO A is in MODE=DATA, but VFO B is in some other MODE. To
fix it: switch VFO_A/B, change MODE to DATA, switch VFO_A/B, then hold
SPLIT.
A much easier way to do it is hit A-B twice in succession, which
I'm not sure what I am doing wrong.
WSJTX does not seem to be setting
VFO B frequency with the K3 in split
mode and with WSJTX in split mode.
Many web pages sat that in split mode
WSJTX moves the split fequency around
in 500 Hz increments so that WSJTX
can cover the 4K Hz width of the combined
I use DXLabs Commander as the CAT controller for WSJTX
https://picasaweb.google.com/k5oai.sam/Digital#6013677746237592786
you have to set the K3 into Split
as well as check the WSJTX software for [ ] Split TX
On 5/15/2014 8:16 AM, Larry Lopez wrote:
I'm not sure what I am doing wrong.
WSJTX
Thank you for helping.
I have set K3 to split, the TX arrow points down.
I have set WSJTX for Split in the configuration check box.
I have no controller, WSJTX talks to K3 directly
using elecraft USB serial cable (from elecraft elivered Monday).
WSJTX cat control gets and sets frequency correclty
to get to their Help file either hit F1, or tselect Online Helo from the
drop down Help menu
from the WSJTX Online Help
http://www.physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-toc2.html#TUT_MAIN
under Transceiver Setup:
Bandwidth and Frequency Setting
Many SSB transceivers have a
I just set mine up like yours using the K3 CAT
https://picasaweb.google.com/k5oai.sam/Digital#6013717488489012674
here's the sequence I use to make it work for me:
Set K3 to TX DATA DATA A
tune VFOA to say 14.076
double tap AB (to set VFO A B to all the same settings)
now HOLD AB (to get
I'll try it tonight.
I bet it's because I haven't been setting the frequency on the VFO B !!!
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-split-mode-apparently-not-working-with-WSJTX-JT9-tp7589127p7589153.html
Sent from the Elecraft mailing list archive at
I needed to clone A- B
I needed to go to DATA A mode.
Thank you very much !!!
Larry
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-split-mode-apparently-not-working-with-WSJTX-JT9-tp7589127p7589157.html
Sent from the Elecraft mailing list archive at Nabble.com.
I needed to clone A- B
I needed to go to DATA A mode.
Thank you very much !!!
Larry
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-split-mode-apparently-not-working-with-WSJTX-JT9-tp7589127p7589159.html
Sent from the Elecraft mailing list archive at Nabble.com.
I can not get my K3 to TX in split mode for CW.
What is the magic setting, I put it in split mode and change the frq to
1k up but it still does TX on RX frequency.
There has to be something simple to do this.
~73
Don
KD8NNU
FH#4107
-.- -.. ---.. –. –. ..-
Hi Don,
Perhaps the problem is that VFO-B is in a different mode (maybe SSB or
DATA). The simplest step to avoid this problem is to tap the A-B button (#3)
twice. The double tap transfers ALL parameters from VFO-A to VFO-B. Then you
can hold the same button to enter SPLIT and rotate the VFO-B
On 12/22/2012 11:21 AM, gold...@charter.net wrote:
I can not get my K3 to TX in split mode for CW.
What is the magic setting, I put it in split mode and change the frq to
1k up but it still does TX on RX frequency.
There has to be something simple to do this.
There is:
1. Put VFO A on the
-.- -.. ---.. -. -. ..-
-Original Message-
From: Fred Jensen
Sent: Saturday, December 22, 2012 3:31 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Split in CW
On 12/22/2012 11:21 AM, gold...@charter.net wrote:
I can not get my K3 to TX in split mode for CW.
What is the magic setting
Howdy K3' people:
I tried out my new K3 attempting to jump into the ZL9HR melee on 40m.
I set VFO-B for my TX freq, way-up from his xmit.
I set VFO-A to listen to the ZL.
I set QSK-full VOX .
Sometimes I wanted to Rx on MY Xmit freq to see if I was 'maybe' close
to where he was currently
Bob,
That is the way it is supposed to work if you do not have a SubRX in
your K3. Actually with the subRX it works the same way, but there is no
need to use it since you can listen to your TX frequency in one ear and
the RX frequency in the other ear.
So, I do not understand your why
To supplement what Don has just said: The REV button is a
momentary-contact version of A/B. That is, instead of pressing REV for x
seconds, you can achieve the same result by tapping A/B, waiting x
seconds, and then tapping A/B to restore the initial situation. If the
VFO A display switches to
On Thursday Wilhelm used a Straight-Key to send:
-Original Comment---
Bob,
That is the way it is supposed to work if you do not have a SubRX in
your K3.
Ah, but I do have a Sub-Rx and likely no clue how to make use of it yet.
Also, I was not using the Cans but rather just
Hi Bob,
That should not happen. The problem could be related to your computer
software refreshing VFO A while you are holding the REV button. What
software are you running?
73,
Mike K2MK
KD7YZ Bob wrote
Howdy K3' people:
I tried out my new K3 attempting to jump into the ZL9HR melee on
I don't know if mine is the effect you're seeing but for K3 #642,
tapping the buttons too lightly [to keep the radio from moving] will
often beep but nothing happens, and much less often, will cause some
other function to occur. Once I secured the radio with that double
stick moulding tape on
Bob,
Look at the Split Mode with the Sub receiver: portion of the manual
As typical in split mode, you will transmit on VFO B and receive on VFO A.
Do not fall into the trap of mentally associating VFO A with the main
and VFO B with the sub. It is sometimes that way, but not always -
: [Elecraft] {K3} Split when changing bands?
OK...I got this figured out.
I have SPLT SV set to on in the CONFIG/TECH MD menu.
As long as I change bands with the K3 and NOT by clicking on a spot in the
logging software, the K3 operates like it's supposed toNOT turning off
split and remembering
to the original band the split setup should change.
Pete, W1RM
-Original Message-
From: Gary K9GS [mailto:garyk...@wi.rr.com]
Sent: Friday, November 16, 2012 11:47 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] {K3} Split when changing bands?
OK...I got this figured out.
I have
OK...I got this figured out.
I have SPLT SV set to on in the CONFIG/TECH MD menu.
As long as I change bands with the K3 and NOT by clicking on a spot in
the logging software, the K3 operates like it's supposed toNOT
turning off split and remembering the split setting by band.
However, if
On the K3say you're on 160M with split activated and the sub
receiver turned on. Then you change bands to, say 80M. A few minutes
later you go back to 160M.
The K3 goes back to the original VFO A and VFO B frequencies as before
but the SPLIT deactivates. I thought that by turning SPLT
I recently assembled the K3 with just the ATU as an added option no sub rcv.
In trying to run in SPLIT mode SSB I set the VFO A for my RCV of the DX
station I am trying to work and VFO B to the frequency I need to transmit
on. I seem to be transmitting on the VFO B frequency and I hear the DX
Hi Joe:
Sounds like you have tapped the DISP button so that the VFO
B freq is NOT shown on the display. If you tap the DISP
button, the VFO B freq will be displayed and if you are in
split mode, the TX arrow will be pointing to B indicating
that is the freq that you will transmit on. The VFO A
Thanks Ken, yes I hit the DISP button and I see the VFO B displayed as when I
initially set it. I guess I got accustomed to using rigs that when you keyed
the mic in SPLIT mode the frequency you were transmitting on came up as the
main display. This will wok it's just different to me and not what
I must set up a macro in N1MM for SPLIT. The number of times
instead of holding the button to select or cancel SPLIT I just pressed
it and made VFO B = VFO A !! G !!
It's the only something I really HATE about my K3.
Why not use the NOR/REV button hold instead ?
73
Stewart G3RXQ
If I remember correctly, this can be made to do BA - I guess you could ask for
an option to switch BA to go to AB in place of SPLIT and put SPLIT as hold REV
to me it's just a case of learning to tap or hold correctly!
Having said that, the one thing I do find annoying is VOX, since I use it so
, just type it in.
73, Ted W4NZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]On Behalf Of Stewart
Sent: Monday, October 31, 2011 4:56 AM
To: John Oppenheimer; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SPLIT+2
I must set up
]On Behalf Of Stewart
Sent: Monday, October 31, 2011 4:56 AM
To: John Oppenheimer; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SPLIT+2
I must set up a macro in N1MM for SPLIT. The number of times
instead of holding the button to select or cancel SPLIT I just pressed
it and made VFO B = VFO
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]On Behalf Of Stewart
Sent: Monday, October 31, 2011 4:56 AM
To: John Oppenheimer; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SPLIT+2
I must set up a macro in N1MM for SPLIT
on that frequency.
73, Ted W4NZ
-Original Message-
From: Stewart [mailto:stew...@twinwood.me]
Sent: Monday, October 31, 2011 8:10 AM
To: Stewart; Ted Bryant; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SPLIT+2
Tried it, works a treat !
73
Stewart G3RXQ
On Mon, 31 Oct 2011 11:48
-Original Message-
From: Stewart [mailto:stew...@twinwood.me]
Sent: Monday, October 31, 2011 8:10 AM
To: Stewart; Ted Bryant; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SPLIT+2
Tried it, works a treat !
73
Stewart G3RXQ
On Mon, 31 Oct 2011 11:48:35 GMT, Stewart wrote:
Hi Ted
G3RXQ wrote:
Why not use the NOR/REV button hold instead ?
What NOR/REV button are you talking about, Stewart?
What some other radios call NOR/REV is called ALT on the K3 - it's a
hold of the left end of the MODE button. I don't think that's what you mean.
There is a button labelled REV on
SPLIT+2 is my second favorite MACRO
PF1 = SPKR+PH # Very useful if using the back panel phone jacks.
PF2 = SPLIT+2
The SPLIT+2 is so valuable, why is it not a standard front panel
setting? Maybe AB triple hit. Or a new option for the AB double hit to
also do the +2 and SPLIT on. And free up PF#
If you use DXLab's Commander rig control program, it has buttons to do quick
splits up or down 1, 2, 5, and 10 kHz. http://www.dxlabsuite.com/
Another technique is to set VFO B on the DX station and tune the pileup with
the larger VFO A knob with split turned off.
I plug a Radio Shack stereo
Hi,
It works fine for me. Make sure both VFO's are in FM mode. Press the AB
*twice* to ensure this. I tried this, tuned B a few kHz away and it
transmits fine in split.
AB2TC - Knut
Randy Cook wrote:
This afternoon, I saw T32C on 10M FM, 29.580.. They were running split
(actually several
This afternoon, I saw T32C on 10M FM, 29.580.. They were running split
(actually several split frequencies over the time I was listening). The
signal was a solid 59 for a while in Northern California. I tried to set to
Split mode with the transmit frequency high, and got a Split N/A
Are both VFO's in FM mode?
Rob
NV5E
From: crc...@pacbell.net
Date: Sat, 15 Oct 2011 17:24:32 -0700
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 split on FM
This afternoon, I saw T32C on 10M FM, 29.580.. They were running split
(actually
Just a wild guess
You might try setting the repeater offset so that the input matches their QSX
frequency. I've never tried it but it might work.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 15 Oct 2011 17:24:32 -0700, Randy Cook
Just a thought in the config menu ( FM MODE ) is it set to on ?
Ed K7WIA
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-split-on-FM-tp6896771p6896828.html
Sent from the Elecraft mailing list archive at Nabble.com.
Apologies,I'm sure this has already been dealt with before.
When operating split, sometimes VFO B will track VFO A, sometimes it
doesn't.
For example I change to from VFO B to A, QSY a little and find VFO B has
also changed, ie its kept the same spacing between VFO's.
This is very irritating
On Wed, Sep 21, 2011 at 9:55 PM, Iain g4...@justfans.co.uk wrote:
Apologies,I'm sure this has already been dealt with before.
When operating split, sometimes VFO B will track VFO A, sometimes it
doesn't.
For example I change to from VFO B to A, QSY a little and find VFO B has
also changed,
Iain,
This is because the VFOs are linked You link/unlink the VFOs with a
long hold of the SUB button.
The setting is per band, so you can have it on one band and not on
another.
73,
Don W3FPR
On 9/21/2011 5:55 PM, Iain wrote:
Apologies,I'm sure this has already been dealt with before.
Many thanks guys.
I hadn't read that part of the manual as I don't have a sub receiver.
Silly me.
Iain. G4SGX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Doug -
Try downloading K-Keys from the Elecraft software downloads area.
Assigns function keys and ctrl key combinations to k3 functions.
Easy to use and user programmable. Developed by a friend of mine KE3C
exactly in response to the hovering the finger challenge you mentioned...
73 de
Friends,
I am getting into trouble when checking ST0R on other bands and then
returning back to my original band. If listening to ST0R on 80M and
changing bands to see how they are progressing on 40M when changing back to
80M the K3 is no longer operating split. My mind does not function
Doug,
In the config menu change SPLT SV to YES. The split will be memorized per
band. Vy useful when chasing DXpedition
73 Val LZ1VB
- Original Message -
From: Doug Turnbull turnb...@net1.ie
To: elecraft@mailman.qth.net
Sent: Sunday, July 31, 2011 1:39 PM
Subject: [Elecraft] [K3
I liked the pod that I had when I had an OMNI VI.
I find it easier to use a logging program for sending CW messages rather
than using the K3's M1-M4 buttons. I think all of the logging programs have
that capability. My general logger is the DXLab Suite
(http://dxlabsuite.com/) which has that
@mailman.qth.net
Subject: Re: [Elecraft] [K3] Split, changing bands and ST0R
Doug,
In the config menu change SPLT SV to YES. The split will be memorized per
band. Vy useful when chasing DXpedition
73 Val LZ1VB
- Original Message -
From: Doug Turnbull turnb...@net1.ie
To: elecraft@mailman.qth.net
McDonald
Sent: 31 July 2011 13:16
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Split, changing bands and ST0R
I liked the pod that I had when I had an OMNI VI.
I find it easier to use a logging program for sending CW messages rather
than using the K3's M1-M4 buttons. I think all
Now if [LOCK] was memorized per band it would be even more helpful.
--- On Sun, 7/31/11, Val v...@vip.bg wrote:
Doug,
In the config menu change SPLT SV to YES. The split will be memorized per
band. Vy useful when chasing DXpedition
73 Val LZ1VB
...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim McDonald
Sent: 31 July 2011 13:16
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] Split, changing bands and ST0R
I liked the pod that I had when I had an OMNI VI.
I find it easier to use a logging program
I ran into the exact same thing this weekend. I have also noticed several
times if I change bands the P3 will not follow the new frequency of the K3.
A power cycle resolves this but.
When I get a chance I will try to establish the exact conditions of when
this occurs.
Doug
KF4VTT
--
Doug,
There had been an issue with the P3 not receiving band update
information from the K3 under certain conditions (e.g. when K3 bands
were turned off with the band map) but that was fixed several revisions
ago in K3 firmware.
Also, a new version of K3 beta firmware (4.14) has just been
In chasing PJ4B on CW on 20m, I put the K3 in Split. I was trying to find
the station he was just working with the VFO B cursor and that worked
fine.
However if I pressed REV to listen, then the VFO B cursor became frozen; I
could change VFO B's frequency, but the cursor would no longer
There was a firmware fix for this posted earlier today (or maybe yesterday?).
4.14 for the K3.
Grant/NQ5T
On Oct 11, 2010, at 3:31 PM, vidi wrote:
I have the same experience and could get out of the problem by turning on
and off the P3
Vidi - ZS1EL
In chasing PJ4B on CW on 20m, I put the K3 in Split. I was trying to find
the station he was just working with the VFO B cursor and that worked fine.
However if I pressed REV to listen, then the VFO B cursor became frozen; I
could change VFO B's frequency, but the cursor would no longer move. And
Hi people
Need help. My split function to tx on VFOB. Not function on cw. Works ok on
SSB
VFO B frequency shows a + sign after and when press split says N/A QRQ
Any ideas of what may have gone wrong
Thanks
Norm VK4NP
__
Elecraft
Norm,
Split is not available if QRQ is set on. RIT/XIT do not work in QRQ
mode either, but Wayne has promised a limited range RIT sometime in the
future. The SHIFT will not function either - see the firmware release
notes for version 4.03.
Go to CONFIG: CW QRQ in the menu and set it to
To: Norm Shirley Greenaway nw...@bigpond.com
Cc: elecraft@mailman.qth.net
Sent: Thursday, September 23, 2010 1:27 PM
Subject: Re: [Elecraft] K3 Split function
Norm,
Split is not available if QRQ is set on. RIT/XIT do not work in QRQ
mode either, but Wayne has promised a limited range RIT
I wonder what other K3 users think about having this SPLIT option available
on the K3. Like many K3 users, chase DX stations and DXpeditions. Many of
them working split, listening on a different frequency. With many radios
that I have used, when a band switch is made, not only are both the 'A'
That option to save the split state per band is already there. Turn
SPLT SV to YES.
73, Ted, W2ZK
On 4/7/2010 12:01 PM, Richard Zwirko wrote:
I wonder what other K3 users think about having this SPLIT option available
on the K3. Like many K3 users, chase DX stations and DXpeditions. Many
Zwirko
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Split option idea
That option to save the split state per band is already there. Turn SPLT SV
to YES.
73, Ted, W2ZK
On 4/7/2010 12:01 PM, Richard Zwirko wrote:
I wonder what other K3 users think about having this SPLIT option
G'Day,
I have been changing back and forth between split and normal use without any
difficulty today.
Seems like I have been doing it the same way for over a year now and still see
no problem with the way it works.
I don't have the 2nd RXer by the way.
I don't use cross mode split at all so
. oktober 2009 22:40
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Split reminder
There is just so much any manufacturer can do to protect an operator
from him or herself. The K3 already has the delta f light, the SPLIT
indicator on the display (TU W2ZK - I'd forgotten that) and frequency
This has to be one of the silliest threads EVER! I think the indications that
you are working split are clear enough, but if you go back and read the
original post that started it, the OP complained that he had FORGOTTEN to
engage split several times and suggested that a clearer indication of
What about a menue item that will activate split automaticly when the DX says
up and will bring the operator a beer or a coffe when the DX says QRX 5?
;-)
Sorry couldn't resist, don't beat me up -(
73 de Roland, DC1RS
-
K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K,
Snip
This has to be one of the silliest threads EVER! I think the indications that
you are working split are clear enough, but if you go back and read the
original post that started it, the OP complained that he had FORGOTTEN to
engage split several times and suggested that a clearer indication
Speaking of SPLIT
how about SPLITTING this thread to PRIVATE EMAILS.
Enough bandwidth has been wasted on it already.
de K2GN/Larry
K3 - S/N 3278
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Guys - I ended this thread yesterday.
Thanks again for all the input!
73, Eric WA6HHQ
Elecraft moderator
DC1RS wrote:
What about a menue item that will activate split automaticly when the DX says
up and will bring the operator a beer or a coffe when the DX says QRX 5?
;-)
This thread was officially ENDed yesterday.
73, Eric WA5HHQ
Elecraft moderator
Larry - K2GN wrote:
Speaking of SPLIT
how about SPLITTING this thread to PRIVATE EMAILS.
Enough bandwidth has been wasted on it already.
de K2GN/Larry
K3 - S/N 3278
On Tue, 20 Oct 2009 05:53:27 -0700 (PDT), Julian, G4ILO
julian.g4...@gmail.com wrote:
This has to be one of the silliest threads EVER!
[snip]
Thet's fer shore!
Tom, N5GE
n...@n5ge.com
K3 #806, K3 #1055, PR6,
XV144, XV432, KRC2,
W1 and other small kits.
2 W2's on order
1 K144XV on order
On Tue, 20 Oct 2009 10:21:24 -0400, Larry - K2GN k...@comcast.net
wrote:
Speaking of SPLIT
how about SPLITTING this thread to PRIVATE EMAILS.
Enough bandwidth has been wasted on it already.
de K2GN/Larry
K3 - S/N 3278
[snip]
Amen, Larry!
I have just finished writing the kill filter for this
You guys are beating a dead horse again
Every radio has it's differences!!
Some you like, some you don't.
If they were all the same we'd be talk about how all our
Wa-cha-ma-call-its Radio looks and does evwerything the same!!
If you like the way, your brand X(Not wanting to pick on
I also like the idea of an initial offset for use with LP-PAN. When turning
on Split, the panadapter would then clearly show both passbands in a
predictable way. With A=B, one is hiding behind the other. With no preset,
one could be off the screen.
73,
Larry N8LP
Ian White GM3SEK wrote:
Wow, Alan, Eric and Wayne, This is a great suggestion for future k3/P3
software:
Snip
I also like the idea of an initial offset for use with LP-PAN. When turning
on Split, the panadapter would then clearly show both passbands in a
predictable way. With A=B, one is hiding behind the other. With
There is just so much any manufacturer can do to protect an operator
from him or herself. The K3 already has the delta f light, the SPLIT
indicator on the display (TU W2ZK - I'd forgotten that) and
frequency
readout for both VFOs. As one who has made his share of errors with
the K3 and
For my part I'm contented with the way AB and Split works.
Maybe it's also that I'm used to it this way because all of my previous rigs
worked like this.
I don't see the need to change this. As for the quick split feature, it is
nice to have but I
never used it because a lot of DX-Stations use
I don't want to contradict but tapping AB once already copy frequency AND
mode to VFO B...
Just turned on the radio and tried again to be 100% sure.
73 de Roland, DC1RS
-
K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K, KFL3A-400,
KAT3
--
View this message in
Am I the only person who got this?
Mike wrote:
Is it possible to have A and B VFO's on different modes? (no sub) If so,
what controls the B mode?
How about having the B VFO automagically go to the same band as A, when
entering split ?
Thanks,
Mike NF4L
No, you're not the only one.
Some people use off-band split, so auto conformance of TX band to RX would
break that. Since a double press of AB brings B on band very quickly, it
does not appeal to me as a great step saver. The logging programs set the
split explicity by writing the
Hi Mike:
I have a SUB RX so it is possible that my comments below might not fully
apply if you don't have a SUB RX.
VFO A and B can be on separate modes. When you hold the A/B (1) button
you'll see b SET on the top display. From there you can change modes, fiddle
with filters, preamp, NR,
On Fri, Oct 16, 2009 at 9:36 PM, Mike nf4l_no_s...@nf4l.com wrote:
Is it possible to have A and B VFO's on different modes? (no sub) If so,
what controls the B mode?
B SET (hold the 1 button), then change mode.
How about having the B VFO automagically go to the same band as A, when
entering
Thanks, Guy -
I'm not sure what you mean by off-band split. I was just wondering if
there was a setting I didn't know about.
I think you mean my first question. Pressing B SET I can set B to a
different mode.Then when I go into split, the B mode blinks above the A
mode, and the pointer to B
Thanks, Michael -
Since I don't have the SUB RX, and B is always the xmit VFO, I'm not
sure why B SET even works, except maybe for modes.
I had the same scenario as you, and it took me longer to figure out! I
dunno how the mode got set differently on B. The double tap is a good tip.
Mike
Thanks Ian -
Mike
Iain MacDonnell - N6ML wrote:
On Fri, Oct 16, 2009 at 9:36 PM, Mike nf4l_no_s...@nf4l.com wrote:
Is it possible to have A and B VFO's on different modes? (no sub) If so,
what controls the B mode?
B SET (hold the 1 button), then change mode.
How about
Snip(:-))
Egads. All the riga-marole! Turn on the sub and put it on his transmit freq.
Tune the A which will be your transmit to where the other guys are hollering at
him. I use a headset and track the calling mob with the A ear and listen to
when he's transmitting with the B ear. Why
I noticed when I was jumping between bands chasing K4M that when returning
to a band where I had split frequency enabled that the split was disabled
and
then by misstake I started to transmit on their transmitting frequency.
How to keep the K3 splitoperation enabled when jumping around
Is it possible to have A and B VFO's on different modes? (no sub) If so,
what controls the B mode?
How about having the B VFO automagically go to the same band as A, when
entering split ?
Thanks,
Mike NF4L
__
Elecraft mailing list
1 - 100 of 185 matches
Mail list logo
