FWIW, I did find I can use a virtual port
with it # "10" If I assign any other
numerical value it will not work. Won't
work with Win 7, I tried for hours but
with this computer & Win 10, WSJT-X works
on virtual port 10. All the other software
works on whatever virtual port I tell it
to work on.
Without getting into the middle of this, I would make one
suggestion. Download WSJT-10 and see if your problems go away.
WSJT-X is Joe Taylor's (with other developers) attempt to make WSJT
usable for all bands and uses; it is fairly new and being revised to
solve issues, so if you are a user
ccurs with various transceivers in multiple locations.
> >>
> >> Bert N8NN
> >>
> >> -Original Message-
> >> From: Don Wilhelm [mailto:donw...@embarqmail.com]
> >> Sent: Monday, November 13, 2017 3:17 PM
> >> To: n...@earth
cations.
>>
>> Bert N8NN
>>
>> -Original Message-
>> From: Don Wilhelm [mailto:donw...@embarqmail.com]
>> Sent: Monday, November 13, 2017 3:17 PM
>> To: n...@earthlink.net; g...@ka1j.com; Elecraft@mailman.qth.net
>> Subject: Re: [Elecraft]
To add to my previous post-
I have the problem, home made interface for serial port ptt. This
problem is NOT a MicroHam problem, or Elecraft problem.
I have had the problem on my IC-7000 and ANAN-10E (which I no longer use
split on, not needed there) I have not seen the problem when NOT using
.@ka1j.com; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx
Bert and Gary,
Have you looked for a computer problem? Such as having both PTT via command
and via an RS-232 signal line? Do you have both VOX on and another means of
keying the transceiver?
73,
Don W3FPR
On 11/13/2017 11:21 PM, Gary Smith wrote:
> When I first started with WSJT-X I asked
> on the WSJT-X reflector and was told quite
> clearly if I want to use it, I had to run
> it directly to the port for the K3, no
> other control software should be running
> at the same time and if I wanted to
On 13/11/17 23:10, Don Wilhelm wrote:
> The proper place to cure "RF in the shack" problems is in your antenna
> system. A good common mode choke (many call it a balun) in the antenna
> feedline and running the feedline at right angles to the radiator
> (assuming a dipole) to keep the feedline
Hi Joe,
>
>
> On 11/13/2017 9:01 PM, Gary Smith wrote:
> >
> > The only way I can reproduce the problem
> > every time ( And FWIW, PTT-Key is set to
> > off-off) is to go into the WSJT-X
> > settings, select Radio, click on test PTT
> > and it creates this exact condition. If I
> > exit
On 11/13/2017 9:01 PM, Gary Smith wrote:
>
> The only way I can reproduce the problem
> every time ( And FWIW, PTT-Key is set to
> off-off) is to go into the WSJT-X
> settings, select Radio, click on test PTT
> and it creates this exact condition. If I
> exit settings without clicking on Test
: Gary Smith
Sent: Monday, November 13, 2017 2:12 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] WSJT-X K3/K3s hanging as Tx
For those using WSJT-X, sometimes I find
the K3s is locked as transmit but there is
no RF being sent and no Rx from the K3.
Looking at the P3 I see a jitter on the
upper
Folks,
I seem to have ignited a fire-storm that
was not at all what I was trying to
accomplish, I was just stating an issue
and asking if others had experienced this
and it seems like the topic has taken on
legs.
I am a novice at WSJT-X but I can't help
but feel that it is a program that
Thank you Joe for going public with that instead of private email!
I will not respond other than this.
73,
Don W3FPR
On 11/13/2017 7:46 PM, Joe Subich, W4TV wrote:
> Use software PTT in the applications while W4TV figures out what is
> going on with the MicorHam gear.
Damn it Don! *DON"T
> Use software PTT in the applications while W4TV figures out what is
> going on with the MicorHam gear.
Damn it Don! *DON"T TELL USERS HOW TO USE MICROHAM PRODUCTS*
The microHAM instructions are very clear - *NEVER USE CAT FOR PTT*
YOU HAVE NO BUSINESS HANDING OUT INSTRUCTIONS THAT VIOLATE
-05:00) To: donw...@embarqmail.com,
g...@ka1j.com, Elecraft@mailman.qth.net Subject: Re: [Elecraft] WSJT-X K3/K3s
hanging as Tx
The CAT and PTT are on different COM ports, per the installation instructions
for the microKEYER II when using WSTJ-X. And it's not a stray RF problem as I
ha
>
>
> The roofing filter may have a fair amount of group delay inequality at
> the edges of the passband, which can lead to inter-symbol interference
> on digital modes. I
WSJT-X can run split. In split mode, it will adjust the Tx frequency so
that the audio tones are always near the middle of
net, g...@ka1j.com,
Elecraft@mailman.qth.net Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx
Bert and all,
Use software PTT in the applications while W4TV figures out what is
going on with the MicorHam gear.
Are all those having a similar problem using MicroHam something? or does
it occur with
Bert and all,
Use software PTT in the applications while W4TV figures out what is
going on with the MicorHam gear.
Are all those having a similar problem using MicroHam something? or does
it occur with other interfaces.
73,
Don W3FPR
On 11/13/2017 7:00 PM, Bert Garcia N8NN wrote:
The CAT
Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx
Bert and Gary,
Have you looked for a computer problem? Such as having both PTT via command
and via an RS-232 signal line? Do you have both VOX on and another means of
keying the transceiver?
73,
Don W3FPR
On 11/13/2017 3:07 PM, Bert Garcia
Not necessarily true. If, for example, equipment in the shack is not
properly bonded together, an antenna close to the shack will put a lot
of RF in the shack, which will induce RF onto cables connected to
equipment, and is likely to couple into equipment. If an antenna is
working as an
Richard and all,
The proper place to cure "RF in the shack" problems is in your antenna
system. A good common mode choke (many call it a balun) in the antenna
feedline and running the feedline at right angles to the radiator
(assuming a dipole) to keep the feedline from picking up radiation
On 13/11/17 20:18, Jim Brown wrote:
> On 11/13/2017 11:12 AM, Gary Smith wrote:
>> For those using WSJT-X, sometimes I find
>> the K3s is locked as transmit but there is
>> no RF being sent and no Rx from the K3.
>
> I've been using WSJT-X since it was first introduced several years ago,
> and
On 13/11/17 19:12, Gary Smith wrote:
> For those using WSJT-X, sometimes I find
> the K3s is locked as transmit but there is
> no RF being sent and no Rx from the K3.
>
> Anyone experience this and figure out how
> to prevent it?
I've seen this occasionally too. I've had a number of odd
Ptt for everything. 73
Tom Va2fsq.com
Sent from my Samsung Galaxy smartphone.
Original message From: Jim Brown <j...@audiosystemsgroup.com>
Date: 2017-11-13 3:18 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re:
[Elecraft] WSJT-X K3/K3s hanging as Tx
On 11/13/2017 11:12
, 2017 3:34 PM
To: j...@audiosystemsgroup.com ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx
Using hardware PTT using Dtr or RTS is technically fine but many software
packages will default to having them on with the consequence that the
transmitter is in transmit
th.net Subject:
Re: [Elecraft] WSJT-X K3/K3s hanging as Tx
On 11/13/2017 11:12 AM, Gary Smith wrote:
> For those using WSJT-X, sometimes I find
> the K3s is locked as transmit but there is
> no RF being sent and no Rx from the K3.
I've been using WSJT-X since it was first introduced se
<g...@ka1j.com> Date:
2017-11-13 2:12 PM (GMT-05:00) To: Elecraft@mailman.qth.net Subject:
[Elecraft] WSJT-X K3/K3s hanging as Tx
For those using WSJT-X, sometimes I find
the K3s is locked as transmit but there is
no RF being sent and no Rx from the K3.
Looking at the P3 I see a
Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith
Sent: Monday, November 13, 2017 2:13 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] WSJT-X K3/K3s hanging as Tx
For those using WSJT-X, sometimes I find the K3s is locked as transmit
On 11/13/2017 11:12 AM, Gary Smith wrote:
For those using WSJT-X, sometimes I find
the K3s is locked as transmit but there is
no RF being sent and no Rx from the K3.
I've been using WSJT-X since it was first introduced several years ago,
and I've never had this problem. I've always used VOX
Bert and Gary,
Have you looked for a computer problem? Such as having both PTT via
command and via an RS-232 signal line? Do you have both VOX on and
another means of keying the transceiver?
73,
Don W3FPR
On 11/13/2017 3:07 PM, Bert Garcia N8NN wrote:
This problem is not unique to the
it, the lockups will start again.
Bert N8NN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith
Sent: Monday, November 13, 2017 2:13 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] WSJT-X K3/K3s hanging as Tx
For those using WSJT-X, sometimes I find
the K3s is locked as transmit but there is
no RF being sent and no Rx from the K3.
Looking at the P3 I see a jitter on the
upper half of the screen as if there was a
tiny output but no Rf is seen on any of
the three SWR meters in line (K3s, AP3 &
32 matches
Mail list logo
