Elliott Laboratories Inc. is a world-class EMC and Product Safety
compliance engineering service provider specializing in product design
evaluations to meet regulatory requirements, state-of-the-art laboratory
testing, and global product submittals and certifications. Currently we
have the
From: a-...@tcp-ip.or.jp
Subject: re: Certification of Product Safety Personnel
Thanks for all of the replies so far. While my first letter mentioned
qualifying product safety personnel during an assessment, let's forget about
that. It was a poor choice of words and the situation
On Tuesday, June 25, 1996, Santa Clara Valley Chapter of the Product Safety
Technical Committee is sponsering a presentation of the U.S. Consumer Product
Safety Commission. The meeting will be held at Hewlett Packard, Santa Clara.
The
presentation involves 'consumers product safety'
: RE: EMC and product safety split? (Document link not converted)
Paul, Please post my comments to the PSTC listserver.
I vote for splitting EMC & PSTC and promoting an IEEE Product Safety Society.
I am a member and past-president of the Northeast Product Safety Society
(non-IEEE) chapter of
I was asked by Dell to post this. I also had a head hunter
contact me about it today. If you would like to work through a
head hunter send me a note and I will forward the head hunter
information. Otherwise follow the Dell link information.
Product Safety Manager
Dell Requisition
Dear colleagues, Gateway has an exiting opening for a Senior Product Safety
Engineer at its main Engineering facility in North Sioux City (rural
location on Missouri River on the border of Iowa and South Dakota).
The Senior Product Safety Engineer will be responsible for providing product
We are looking for ways to qualify our Personnel for product safety. As the
largest independent agent in Japan, we have our own in-house training set up,
which we believe is effective in training our personnel. However, when it
comes down to assessment time, the topic "How do you know
Friends and Colleagues,
If anyone in the product safety world could be considered a celebrity,
it would be Rich Nute. Please join us in welcoming Rich for what will
be a very interesting presentation you won't want to miss.
SNACKS AND BEVERAGES PROVIDED!
IEEE Product Safety Engineering So
forwarding for Robert. Jim
Reply Separator
Subject:Job Posting - Senior Product Safety Engineer
Author: "Loop; Robert"
List-Post: emc-pstc@listserv.ieee.org
Date: 11/20/00 2:14 PM
Hi Jim,
I've been asked to help post this
Ladies and Gentlemen,
There is one other medium of product safety information besides
this great email forum. It is the Product Safety Newsletter. This
quarterly publication is published by the Product Safety Technical
Committee of the IEEE EMC Society. The newsletter includes technical
articles
Greetings All,
The EMC Technical Committee 8 (TC-8, Product Safety) is proud to announce that
we have three fine speakers for this year's TC-8 Product Safety Workshop
(PSW). The workshop is being held on Friday, August 12, 2005 during the EMC
Symposium in Chicago. For those EMC engineers
http://www.ieee-pses.org/symposium
http://www.emc2004.org/
Greetings All,
For those who are interested in Product Safety, Technical Committee 8 (TC-8,
Product Safety TC in the EMC Society) is hosting a technical workshop. The
workshop is part of the 2004 IEEE EMC Symposium that is
Safety Professionals,
The next Santa Clara Valley Chapter of the Product Safety Technical Committee
will be held at Hewlett Packard, Santa Clara. The month's topic revolves
around 'consumers', so feel free to bring your friend(s) or family member(s):
List-Post: emc-pstc@listser
251 Volts they now need 12 mm of creepage, or that 1 layer of tape is
not acceptable in a medical transformer.
I don't want to make them experts in Product Safety, after all that is how
I make my living! However, it would be nice for them (pedigreed engineers)
to understand where we (pr
Graco Inc., due to growth and my upcoming retirement, now has two open Product
Safety Engineer positions at our Minneapolis office:
Product Safety and Compliance Engineer II
https://graco.wd5.myworkdayjobs.com/en-US/Graco_Careers/job/Minneapolis-Minnesota-USA-Tech-Center/Product-Safety-and
Here's the field of interest statement straight out of the Constitution for
the new society.
"The field of interest of the Society shall be the theory, design,
development and implementation of product safety engineering for equipment
and devices used in the scientific, engineering,
To Gabe Roy, Leo Heiland and PSTCers.
For access to updates on product safety, check out the Safety Link, an
online resource for product safety professionals. It can be found at:
http://www.safetylink.com
and contains the Web's most comprehensive collection of links to product
safet
reporting to the Department Manager. The responsibilities include consulting,
evaluating, testing and certification of Beckman Coulter hardware products.
This
includes supervising Product Safety Engineers and Product Safety Technicians.
This individual will also play a major role in expanding our
From: Doug Massey [mailto:dmas...@acstestlab.com]
Sent: Thursday, May 13, 2004 1:57 PM
To: Sam
Subject: FW: Product Safety Manager, Contact Andrea Robinson
Do me a favor and post this to the IEEE forum –
Thanks
_
From: Andrea Robinson [mailto:arobin...@lovetts.com]
Sent: Thur
My 2 cents: I agree, it would make my life easier in compliance engineering
if the EE's & ME's would have a little basic understanding of the concepts
of product safety. It seems that they have a general knowledge of EMI/RFI
but the product safety side is still missing.
-Or
All renewing IEEE members and those considering membership in the IEEE
who have an interest in Product Safety have a new society to consider,
the Product Safety Engineering Society (PSES). Visit the PSES web site
at www.ieee-pses.org.
This new Society includes the theory, design, development
Howdy all,
I agree, there needs to be a curriculum available to teach product safety
basics at the University level. However, to truly look at product safety the
curriculum needs to focus on the application of engineering fundamentals to
the design and analysis of provably safe products, not a
I don't know if they still do, but USC, Univ of Washington, and Univ of
Cincinnati used to have some courses in system safety and hazard analysis.
I know that this isn't product safety per se but it does address the issues of
identifying, understanding, and mitigating hazards in
Dan,Rich Dick,Dirk and group.
I would also aggree. years ago I served an apprenticeship with a major computer
manufacturer and for my final year and a half chose to work in product safety.
At the end of the apprenticeship I decided that I wanted to go to university and
get a degree and I set out
your category and class
of equipment after classroom discussions covering the physics of test standard
requirements.
Brian
From: John Allen [mailto:jral...@productsafetyinc.com]
Sent: Friday, May 04, 2018 10:57 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Product Safety Testing and
Dan/Rich/Dick-
My two pence: I agree, too, that a module of some
basic power electronics courses could be a product
safety lesson. We have hired new college graduates
that had little inkling of what was of concern for
product safety; often times they have a modicum of
intuitive feel for products
All,
NOTE - The NORTHEAST PRODUCT SAFETY SOCIETY has a new web address –
WWW.NEPSS.NET. Please make sure you change your shortcuts and links or
you will miss out on all we have to offer!
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on
All,
NOTE - The NORTHEAST PRODUCT SAFETY SOCIETY has a new web address –
WWW.NEPSS.NET. Please make sure you change your shortcuts and links or
you will miss out on all we have to offer!
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on
nding the
Product Safety Engineering Society (PSES) annual Symposium this month that John
recommended. It's a fantastic method to network and learn.
Curt
The opinions expressed are my own and do not necessarily reflect those of my
real.
Jim
Paxar Corp.
FYI...
Reply Separator
Subject:TC-8 activities at 2001 IEEE EMC Symposium
Author: murlin.e.ma...@us.ul.com
List-Post: emc-pstc@listserv.ieee.org
Date: 7/11/01 9:48 AM
Announcement/Reminder
The Product Safety Technical Commi
Sr. Team Lead/Sr. Supervisor
Category: Product Safety, EMC, Reliability
Type: Employee
Description: Job Summary WMS world wide Product Safety, EMC & Reliability
compliance and investigations. They provide leadership to a team of Product
Safety, EMC & Reliability Engineers.
Qualifications
Apologies if this is a duplicate but I dont think the original went through
yesterday. We are currently looking to fill a Senior Product Safety Engineer
position within the fast paced consumer/business IT industry.
Senior Product Safety Engineer will be responsible for providing product
Safety
I think it is better to keep EMC and Product Safety issues posted
together.Otherwise I would have to monitor two separate mailboxes.
Also, some of the engineers dealing with one of the issues have a knowledge
on the second one.
Regards, Israel Yeshurun
There is an open position for a product safety engineer at Microsoft. More
information is here.
Product Safety Engineer in Redmond, Washington, United States | Hardware
Engineering at
Microsoft<https://careers.microsoft.com/us/en/job/1298678/Product-Safety-Engineer>
Regards,
Ted
Req 130468
Safety Engineer
Location: San Diego, CA
Position Summary:
This position is for a Product Safety Engineer within the Platform
Hardware Development group. This position is responsible for the
planning, testing, working with safety agencies and achieving product
safety certifications for
Hello from San Diego:
I would like to encourage my emc-pstc product safety
colleagues to consider presenting a product safety
paper to the IEEE EMC Symposium under TC-8, Safety.
In the field of product safety, we need to improve the
level of both individual professionalism and the product
In my previous employ (telecom) I dealt with JATE, and product safety was
part of the JATE approval
process.
In a 'nutshell' how is ITE product safety handled?
John Juhasz
Fiber Options
Bohemia, NY
List Members,
The IEEE Product Safety Engineering Society would like to announce two upcoming
workshops presented by the PSES.
On Friday, June 22nd in the Atlanta area:
Join your Atlanta area colleagues at Intertek's Duluth, GA lab. You'll have a
chance to learn about LED t
Engineering Position: Product Safety Engineer
Desired Start Date: ASAP
Lucent Technologies, in Denver CO, is looking for a Product Safety Engineer to
join the Denver Regulatory Compliance Lab (DRCL). The DRCL is a self-directed,
highly motivated team that prides itself on strong customer
The Product Safety Engineering Society's web site has been updated with
some news items pertaining to the new society as well as a convenient
applet to log you into the IEEE Communities site to access EMC-PSTC
archives (use the EMC-PSTC Email Forum link in the sidebar). Visit the
PSES web
Fellow EMC-PSTC members:
The Product Safety Technical Committee (PSTC) working group of TC-8
(Technical Committee #8 of the IEEE EMC Society) wish to solicit those who
are interested in starting a local product safety chapter, or increasing
membership for their existing chapter to read on.
The
I am posting the following for Dan Modi ( dan.m...@alconlabs.com ). Please
contact him direct. Do not forget to mark the 2002 IEEE EMC Symposium on your
calander to attend and by all means do not miss the Product Safety Workshop (or
the other TC-8 Sessions). Rich Nute is willing to provide
Greetings All,
Now that the Product Safety Engineering Society is officially getting members,
we need to collect names to start a petition for a Product Safety Chapter in
Colorado. To start a petition the following is required:
"signed by not less than twelve (12) Section members,
Dear EMC/Product Safety professionals,
As a result of the merger of Digital Equipment Corporation and Compaq Computer
Corporation I have found myself in a career transition. For the last 11 years I
had been involved with product safety incident management. I was involved
primarily with Listed
I echo Tania's point of view. From a product safety standpoint, I have
found several "EMC" topics of discussion in this forum which were of use
since there are at times, impacts to product safety.implement an EMC
fix...create a safety concern..besides it's my belief t
All,
There will be a Northeast Product Safety Society / CNEC
Product Safety Engineering Society meeting on Wednesday, March 28th, at the
Holiday Inn, Boxborough MA. A social hour
with light refreshments will begin at 7:00 PM and the technical meeting will
start at 7:30 PM. Bob Johnson ill
All,
There will be a Northeast Product Safety Society / CNEC
Product Safety Engineering Society meeting on Wednesday, March 28th, at the
Holiday Inn, Boxborough MA. A social hour
with light refreshments will begin at 7:00 PM and the technical meeting will
start at 7:30 PM. Bob Johnson
All,
There will be a Northeast Product Safety Society / CNEC
Product Safety Engineering Society meeting tomorrow, March 28th, at the Holiday
Inn, Boxborough MA. A social hour with
light refreshments will begin at 7:00 PM and the technical meeting will start
at 7:30 PM. Bob Johnson ill be
cc:
owner-emc-pstc@majordoSubject: IEEE Product
Safety Engineering Society
m
As part of our regular review of our corporate Product Safety Policy, I would
like to do a quick high level benchmarking what others are doing regarding
product safety in their companies.
1. Do you have a company Product Safety policy, approved at Sr. Management
lever?
2. Do you have a product
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow, February 24th, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00
PM and the technical meeting will start at 7:30 PM. Tom Savino, Senior
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, February 24th, at the Holiday
Inn, Boxborough MA. A social hour with light refreshments will begin at
7:00 PM and the technical meeting will start at 7:30 PM. Tom Savino,
Senior
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow, June 22nd, at the Holiday Inn, Boxborough
MA. A social hour with light refreshments will begin at 7:00 PM and the
technical meeting will start at 7:30 PM. Anton (Tony
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, June 22nd, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Anton (Tony
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, June 27th, at The Holiday Inn,
Boxborough MA. A social networking with light refreshments will begin
at 7:00 PM and the technical meeting will start at 7:30 PM. Michael
Stolicny
I have a job opening for a Product Safety Engineer here at Bose...minimum
3- 5 years product safety experience preferred, must have thorough knowledge
of IEC/UL60065 or similar standards 950, 1010 etc, have handled Agency
submittals, and be willing to get your hands dirty doing testing
, October 05, 2009 10:57 AM
To: emc-p...@ieee.org
Subject: Product Safety Engineer Position in San Diego
Req 130468
Safety Engineer
Location: San Diego, CA
Position Summary:
This position is for a Product Safety Engineer within the Platform
Hardware Development group. This position is responsible for the
An interesting question, "How does one know that their product safety personel
are qualified".
I do not believe that a certificate from an independent body is the answer.
Do the assessors also ask the same question of other personel in the
organization such as managers, vice
Last year, sometime, reference was made about the possible creation of a
University program to teach Product Safety. I was wondering if anybody has
heard anything further about this program?
Daniel W. Mitchell
Product Safety Engineer
Condor DC Power Supplies, Inc.
P: (805) 486-4565 x323
F
Compaq Computer Corp in Houston Texas is looking for a product safety
engineer to support a broad range of information technology products from
handheld products to rack systems. Candidates should have BSEE or equivalent
technical degree and a minimum of 2 years of experience working in the ITE
Esteemed colleagues,
Is there any type of award or recognition for product safety either at a
product level or at a company level? Do any of the industry design awards
include product safety as part of their evaluation criteria? If not, is this
an area that the IEEE Product Safety
To all Product Safety Engineers:
I know many of you are looking for information regarding " Russian GOST
Approval ".
This is your golden opportunity for you to come to the meeting and find out
all the
information you need. Mr. Grant Schmidbauer will be the speaker on April 6,
1999,
Hewlett-Packard has 3 product safety jobs available.
Requisition Position Location
number
--- -
711022Safety EngineerVancouver, Washington
713386Regs/Safety Engineer Vancouver, Washington
713501
Still better, only important chatter should be posted. I have just violated
my suggestion.
Dave
-Original Message-
From: John Coyle [mailto:jco...@norsat.com]
Sent: 10 March, 2000 5:15 PM
To: 'Robert Legg'; 'IEEE EMC-PSTC Forum'
Subject: RE: EMC and product safet
I found the following website http://ergo.human.cornell.edu/
at Cornell that is reasonably close to describing some of the areas of interest
for the typical product safety professional.
Site includes the following text.
"CUErgo presents information from Ergonomics research studies and
rants.
2) TC-8 Product Safety Workshop: Friday August 13, 2004, 8am to 12pm (Noon).
Open to all EMC and PSES registrants. The new IEEE Product Safety
Engineering Society is having their first symposium starting right after our
product safety workshop. For those PSES registrants, the TC-8 workshop is
group, and sincerely hope that you are able
to join us!
About the Presentation:
Although not all EMC Engineers are directly exposed to Product Safety
Compliance on a day-to-day basis, the EMC and Product Safety fields are so
closely related that any Product Safety Knowledge comes in handy for EMC
Greetings All,
As Chair of Technical Committee 8 of the EMC Society, I am calling for those
interested in presenting a product safety workshop paper at the next EMC
Symposium in
2008. TC-8 is planning to sponsor a Product Safety Workshop (PSW) at the 2008
EMC
Symposium. The 2008 EMC Symposium is
'Rich Nute'
Cc: 'emc-p...@ieee.org'
Subject: RE: Product Safety Certification School
My 2 cents: I agree, it would make my life easier in compliance engineering
if the EE's & ME's would have a little basic understanding of the concepts
of product safety. It see
product
safety standard. They are great to attend to really get going on that
particular subject matter, but if you don't have a bit of working safety
knowledge before going into those courses, the subject matter might go right
over your head. I have seen it go over the heads of a lot o
If you have been thinking about joining one of the virtual chapter
meetings, June IS the perfect month to do so. We are inviting you to our
June presentation, where Bob Griffin will be covering 'Product Safety and
the new IoT'.
Join us on Thu June 20th at 12 noon, New York time. I
I agree with Rich on the moral obligation a
company has to avoid injury to those who
use its products.
Every year I give a lecture on Product Safety
to manufacturing engineering students at our
local university. This is what I say in answer to
Why have Product Safety ? -
As well as the
This is a multi-part message in MIME format.
Don, Elwood, Art, et al,
If you are an IEEE member, please look at this petition to create a
Product Safety Society within the IEEE. I attended the TC-8 meeting at
the IEEE EMC Symposium last August, where this was discussed. I thought
that having
I read in !emc-pstc that Tania Grant wrote (in
) about 'Sometimes product
safety just isn't enough', on Fri, 14 Dec 2001:
>And we have strayed here from the subject matter (although I don't
>mind!). Just how much does a product designer and a product
>
Forwarded for John Lindstrom:
-Original Message-
From: Linstrom, John (IndSys, GEFanuc, CDI)
[SMTP:john.linst...@cdynamics.com]
<mailto:[SMTP:john.linst...@cdynamics.com]>
Sent: Monday, March 06, 2000 12:48 PM
To: 'Lacey,Scott'
Subject: RE: Product Safe
> >If the product safety engineer does his job,
there will
> be no test
> >failures.
>
> But between the first model assessment and the
final
> 'pass' there will be costly design changes and
disputes
> between the safety experts and the designers.
That ca
http://www.ieee-pses.org/symposium
http://www.emc2004.org/
The discount for early registration to the First Annual IEEE Product Safety
Engineering Symposium ends July 1, 2004, which is just days away. See the
Symposium web page for more details at: http://www.ieee-pses.org/symposium
The IEEE's Product Safety Engineering Society is creating a new,
peer-reviewed journal
for original work that advances the theory and practice of product safety
engineering.
Help us launch this much-needed resource for the Product Safety and related
professions!
Abstracts and papers and
rom: John Allen [mailto:jral...@productsafetyinc.com]
Sent: Friday, May 04, 2018 10:57 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Product Safety Testing and Evaluation training.
Hi Kevin,
The Product Safety Engineering Society (PSES) is having our annual Symposium
this month. Many Pro
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow, October 26th, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Tam Savino
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting next Wednesday, October 26th, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Tam Savino
All,
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on Wednesday, October 26th, at the Holiday Inn,
Boxborough MA. A social hour with light refreshments will begin at 7:00 PM and
the technical meeting will start at 7:30 PM. Tam Savino
Thanks Bob,
I personally have no need for a commercial investigator today but
I appreciate your effort compling this resource list.
I'll ask at the next Northeast Product Safety Society meeting if the
Society would like maintain and update this information. There was
some prelim
Hi Kevin,
The Product Safety Engineering Society (PSES) is having our annual Symposium
this month. Many Product Safety and Certification subjects are on the program.
Including a 62368-1 Open forum with the guys that created it, implemented it
and use it daily!!
Here's the link -
All,
NOTE - The NORTHEAST PRODUCT SAFETY SOCIETY has a new web address –
WWW.NEPSS.NET. Please make sure you change your shortcuts and links or
you will miss out on all we have to offer!
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting tomorrow
All,
NOTE - The NORTHEAST PRODUCT SAFETY SOCIETY has a new web address –
WWW.NEPSS.NET. Please make sure you change your shortcuts and links or
you will miss out on all we have to offer!
There will be a Northeast Product Safety Society / CNEC Product Safety
Engineering Society meeting on
Add to this list:
South Africa
--
> From: WOODS, RICHARD
> To: bbu...@apcc.com; emc-p...@ieee.org
> Subject: RE: Where is Product Safety Mandatory
> Date: Friday, August 08, 1997 1:05 PM
>
> United States (some states, counties, and cities)
> Canada
> Saudi Ara
ot all EMC Engineers are directly exposed to Product Safety
Compliance on a day-to-day basis, the EMC and Product Safety fields are so
closely related that any Product Safety Knowledge comes in handy for EMC
Engineers. Charlie's presentation will discuss mandatory Safety
certifications, the Eur
; emc-p...@majordomo.ieee.org
Subject: Re: Product Safety Certification School
I found the following website http://ergo.human.cornell.edu/
at Cornell that is reasonably close to describing some of the areas
of interest
for the typical product safety profess
fyi.
Sent: Friday, August 05, 2005 8:00 AM
Subject: 2005 PSES Symposium: Early bird registration extended to Aug. 31,
2005
Early bird discounts for registration to the 2005 IEEE Product Safety
The early bird registration has been extended to August 31, 2005. So it is
not too late to take
Reminder: The "Intent to present and topic" for your paper to be presented at
the 2004 IEEE SYMPOSIUM ON PRODUCT SAFETY ENGINEERING is to be e-mailed by
April 1, 2004, so time is running out. You have only a few days left to come
up with a topic and let us know your desire to present it
---forwarded-message>
Feb 24 15:07 1998
To:'emc-p...@majordomo.ieee.org' (BNR400)
From: Nathan Belsher:0H32(BNR) BNRTP BNR
Subject: Nortel Job Opportunities in EMC & Product Safety
Nortel (Northern Telecom), a leading globa
iety
The First Annual IEEE Symposium on Product Safety Engineering, will be
held August 13-15, 2004 in the Santa Clara Convention Center, Santa
Clara, California. The PSES Symposium will immediately follow
the IEEE Electromagnetic Compatibility Society's (EMC) Annual
Symposium, at
Greetings,
Washington Laboratories, an Engineering and Testing Firm located
approximately 20 miles northwest of Washington, D.C., has the following
career opportunities:
1. Product Safety Technician
2. Product Safety Engineer
3. EMC Test Engineer
Product Safety Technician
Summary:
Assist
Greetings colleagues.
To further my career "credentials" (and +20 year experience) as a
product safety engineer I plan on taking the iNARTE PS certification
test and thus have a couple questions.
1.) Do you feel being iNARTE certified is beneficial to you and your
career? Your employ
List Members,
The 2007 IEEE Symposium on Product Compliance Engineering sponsored by
the IEEE Product Safety Engineering Society will be held on 22-23
October 2007 in Longmont, Colorado (Denver area). We have a record
number of authors presenting this year, see
<http://www.ieee-pses.
Dear EMCS-PSTC list member,
The 2007 IEEE Symposium on Product Compliance Engineering, sponsored by
the
IEEE Product Safety Engineering Society, will be held on 22-23 October
2007 in
Longmont, Colorado (Denver area). We have a record number of authors
presenting
this year, see <http://www.i
Engineering Position: Product Safety Engineer
Desired Start Date: ASAP
Horner Advanced Products Group, in Indianapolis, IN, is looking for a
Product Safety Engineer to join the Qualifications Department. We provide
EMC/EMI, Product Safety, FCC Part 15 and product functional qualification
sonable salary!
Hans
__ Reply Separator _____
Subject: Re: Product Safety Positions in NC
Author: Non-HP-owner-emc-pstc (owner-emc-p...@majordomo.ieee.org) at
hp-boise,shargw2
List-Post: emc-pstc@listserv.ieee.org
Date:01/27/97 04:45 AM
Anyone else tired of
Ladies and Gentlemen,
The on-line Product Safety Newsletter has recently been updated to include
Murlin Mark's latest Chairman's Message and to add a petition for the
formation of the Product Safety Society. Please stop by the site at
http://www.ewh.ieee.org/soc/emcs/pstc/index
1 - 100 of 43846 matches
Mail list logo