On Wed, 19 Nov 2014, kqt4a...@gmail.com wrote:
Date: Wed, 19 Nov 2014 13:52:36 -0600 (CST)
From: kqt4a...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] i guess i need a new motherboard for
On Mon, 17 Nov 2014, John Prentice (FS) wrote:
Date: Mon, 17 Nov 2014 20:25:19 -
From: John Prentice (FS) j...@castlewd.freeserve.co.uk
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
On Wed, 29 Oct 2014, p...@wpnet.us wrote:
Date: Wed, 29 Oct 2014 11:33:42 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76
I've
On Wed, 29 Oct 2014, Pete Matos wrote:
Date: Wed, 29 Oct 2014 13:05:35 -0400
From: Pete Matos petefro...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Wed, 29 Oct 2014, Pete Matos wrote:
Date: Wed, 29 Oct 2014 13:18:49 -0400
From: Pete Matos petefro...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Wed, 29 Oct 2014, p...@wpnet.us wrote:
Date: Wed, 29 Oct 2014 12:29:53 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76
On Wed, 29 Oct 2014, p...@wpnet.us wrote:
Date: Wed, 29 Oct 2014 12:45:20 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76
I think
found is the sentence
or two on pg.18 of the 7i76man.pdf you pointed out. Surely there is a more
detailed explanation of this somewhere?
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Wed, 29 Oct
is getting in ok
but I'm still not getting any axis movement.
if it does not count beyond 0,1 that indicates that either A or B is not
being seen (either a wiring or level issue)
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc-users
the
counts since the last read?
A likely culprit is this:
The MPG common must connect to the field power ground
(the counter will not be reset unless you specifically clear it)
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc
The encoder is powered from TB3 pin 21 and 23 since it's 5V and field power
is 24V. Is it safe to tie the grounds together?
Yes, its safe but possible undesirable as it makes the PC 5V and field power
ground common so you lose the 24V IO isolation
--Original Mail--
From: Peter C. Wallace p
The encoder is powered from TB3 pin 21 and 23 since it's 5V and field power
is 24V. Is it safe to tie the grounds together?
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Wed, 29 Oct 2014 12:45:32 -0700 PDT
On Tue, 28 Oct 2014, Viesturs L?cis wrote:
Date: Tue, 28 Oct 2014 14:18:30 +0200
From: [UTF-8] Viesturs L?cis viesturs.la...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
On Mon, 27 Oct 2014, p...@wpnet.us wrote:
Date: Mon, 27 Oct 2014 15:35:04 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76
The 7i76
On Mon, 27 Oct 2014, andy pugh wrote:
Date: Mon, 27 Oct 2014 20:47:39 +
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Lathe
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Mon, 27 Oct 2014 13:39:46 -0700 PDT
Subject: Re: [Emc-users] Lathe conversion with Mesa 5i25 / 7i76
...
The 7I76 provides one high speed encoder counter
On Sun, 19 Oct 2014, C. SB wrote:
Date: Sun, 19 Oct 2014 19:35:15 +0200
From: C. SB beltoi...@email.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Emc-users Digest, Vol 102, Issue 54
On Sat, 4 Oct 2014, sam sokolik wrote:
Date: Sat, 04 Oct 2014 16:00:47 -0500
From: sam sokolik sa...@empirescreen.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
On Wed, 1 Oct 2014, John Alexander Stewart wrote:
Date: Wed, 1 Oct 2014 22:14:16 -0400
From: John Alexander Stewart ivatt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
On Thu, 25 Sep 2014, John Alexander Stewart wrote:
Date: Thu, 25 Sep 2014 20:56:33 -0400
From: John Alexander Stewart ivatt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
On Thu, 18 Sep 2014, p...@wpnet.us wrote:
Date: Thu, 18 Sep 2014 11:20:16 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help...
the counter mode
to verify thats it indeed set true (1 is technically not correct ist shoud be
set true)
man hostmot2 for details
--Original Mail--
From: Peter C. Wallace p...@mesanet.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Thu, 18 Sep 2014
On Thu, 18 Sep 2014, p...@wpnet.us wrote:
Date: Thu, 18 Sep 2014 15:56:32 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help...
Sorry troubleshooting link is:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?TroubleShooting
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
()_() signature to help him gain world domination.
On Thu, 18 Sep 2014, p...@wpnet.us wrote:
Date: Thu, 18 Sep 2014 16:52:05 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help...
On Thu, 18 Sep 2014, p...@wpnet.us wrote:
Date: Thu, 18 Sep 2014 19:29:43 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help...
On Wed, 17 Sep 2014, Kasey Matejcek wrote:
Date: Wed, 17 Sep 2014 09:56:47 -0500
From: Kasey Matejcek ka...@lkm.bz
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Wed, 17 Sep 2014, p...@wpnet.us wrote:
Date: Wed, 17 Sep 2014 09:50:39 -0500
From: p...@wpnet.us
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help...
On Tue, 16 Sep 2014, Gene Heskett wrote:
Date: Tue, 16 Sep 2014 12:34:09 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Can
On Wed, 17 Sep 2014, Axel Zöllich wrote:
Date: Wed, 17 Sep 2014 01:26:26 +0200
From: Axel [ISO-8859-1] Zöllich fa...@zoellich.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 5i25 detected, but not
but practically
speaking you will have implement your own protocol for communication with the
remote device.
On Sat, 13 Sep 2014 14:10:13 -0700 (PDT)
Peter C. Wallace p...@mesanet.com wrote:
On Sat, 13 Sep 2014, Karlsson Wang wrote:
Date: Sat, 13 Sep 2014 21:44:26 +0200
From: Karlsson
On Sat, 13 Sep 2014, Karlsson Wang wrote:
Date: Sat, 13 Sep 2014 21:44:26 +0200
From: Karlsson Wang nicklas.karls...@karlssonwang.se
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] 7i80 with ethernet,
On Tue, 9 Sep 2014, TJoseph Powderly wrote:
Date: Tue, 09 Sep 2014 21:06:10 -0500
From: TJoseph Powderly tjt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re:
Subject: Re: [Emc-users] Mixing BLDC and brushed motors
Greetings to anyone who compiles Mesa bitfiles
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
On Thu, 4 Sep 2014, John Prentice (FS) wrote:
Date: Thu, 4 Sep 2014 22:44:13 +0100
From: John Prentice (FS) j
On Thu, 4 Sep 2014, John Prentice (FS) wrote:
Date: Thu, 4 Sep 2014 13:50:23 +0100
From: John Prentice (FS) j...@castlewd.freeserve.co.uk
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Mixing BLDC and brushed motors
Peter thank you
-Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Yes you can look at the 7i39 as 6 individual 1/2 bridges and drive 3 DC
motors from one 7i39. if a brushed motor was connected to half bridges
On Sat, 30 Aug 2014, Gene Heskett wrote:
So in the most recent 2.6.2, hal_scope seems to be in need of some TLC.
So now I am going to have to concoct some sort of a way to see if I can
capture this startup dir twiddling on a non-storage scope. Doing it 10x a
second, I may be able to get
-users] 5i25 - 7i7x maximum cable length?
On 8/26/2014 10:12 AM, Peter C. Wallace wrote:
15 ft is possible (~4.5M) depending on how electrically noisy your
environment is. These cables are standard IEEE-1284 compatible male/male
printer cable extensions.
Use high quality, round, shielded cable
On Tue, 26 Aug 2014, Axel Zöllich wrote:
Date: Tue, 26 Aug 2014 17:42:19 +0200
From: Axel [ISO-8859-1] Zöllich fa...@zoellich.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] 5i25 - 7i7x maximum cable
On Sun, 24 Aug 2014, John Alexander Stewart wrote:
Date: Sun, 24 Aug 2014 15:34:59 -0400
From: John Alexander Stewart ivatt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
On Sat, 16 Aug 2014, Drew Rogge wrote:
Date: Sat, 16 Aug 2014 19:32:51 -0700
From: Drew Rogge d...@dasrogges.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Thu, 14 Aug 2014, Gene Heskett wrote:
Date: Thu, 14 Aug 2014 20:06:20 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users]
On Wed, 13 Aug 2014, Gene Heskett wrote:
Date: Wed, 13 Aug 2014 19:08:44 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users]
On Sun, 10 Aug 2014, Schooner wrote:
Date: Sun, 10 Aug 2014 16:19:56 +0100
From: Schooner schoone...@tiscali.co.uk
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] 5i25 GPIO mapping
Hi
Dipping my
On Sun, 10 Aug 2014, John Alexander Stewart wrote:
Date: Sun, 10 Aug 2014 12:52:19 -0400
From: John Alexander Stewart ivatt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
-31 17:48, Peter C. Wallace wrote:
On Thu, 31 Jul 2014, Marius Liebenberg wrote:
Date: Thu, 31 Jul 2014 17:07:57 +0200
From: Marius Liebenberg mar...@mastercut.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users
with 7i76
On 2014-08-08 17:01, Peter C. Wallace wrote:
On Fri, 8 Aug 2014, Marius Liebenberg wrote:
Date: Fri, 08 Aug 2014 16:54:20 +0200
From: Marius Liebenberg mar...@mastercut.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users
On Thu, 31 Jul 2014, Marius Liebenberg wrote:
Date: Thu, 31 Jul 2014 17:07:57 +0200
From: Marius Liebenberg mar...@mastercut.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
On Mon, 28 Jul 2014, Ralph Stirling wrote:
Date: Mon, 28 Jul 2014 20:46:39 +
From: Ralph Stirling ralph.stirl...@wallawalla.edu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net emc-users@lists.sourceforge.net
Subject:
On Mon, 28 Jul 2014, Ralph Stirling wrote:
Date: Mon, 28 Jul 2014 21:36:06 +
From: Ralph Stirling ralph.stirl...@wallawalla.edu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
halcompile and it compiles fine for me)
From: Peter C. Wallace [p...@mesanet.com]
Sent: Monday, July 28, 2014 3:16 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] question on 5i25+(2)7i76
On Mon, 28 Jul 2014, Ralph Stirling wrote:
Date
On Fri, 25 Jul 2014, John Thornton wrote:
Date: Fri, 25 Jul 2014 05:36:58 -0500
From: John Thornton bjt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Fri, 25 Jul 2014, Ralph Stirling wrote:
Date: Fri, 25 Jul 2014 17:10:24 +
From: Ralph Stirling ralph.stirl...@wallawalla.edu
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject:
look at a standard parallel port config for thread
setup etc)
Another option is to use 5I25 hardware stepgens on P2 so you only need one 1
KHz thread
On 2014-07-24 21:23, Peter C. Wallace wrote:
On Thu, 24 Jul 2014, andy pugh wrote:
Date: Thu, 24 Jul 2014 20:17:04 +0100
From: andy pugh
On Fri, 25 Jul 2014, Marius Liebenberg wrote:
Date: Fri, 25 Jul 2014 21:07:31 +0200
From: Marius Liebenberg mar...@mastercut.co.za
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Stepper driven A
On Thu, 24 Jul 2014, andy pugh wrote:
Date: Thu, 24 Jul 2014 20:17:04 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Thu, 24 Jul 2014, Gene Heskett wrote:
Date: Thu, 24 Jul 2014 16:13:22 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] joint
On Thursday 24 July 2014
On Thu, 17 Jul 2014, a k wrote:
Date: Thu, 17 Jul 2014 02:12:50 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] integrator manual
On Wed, 16 Jul 2014, a k wrote:
Date: Wed, 16 Jul 2014 11:32:33 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] integrator
On Wed, 16 Jul 2014, Peter C. Wallace wrote:
Date: Wed, 16 Jul 2014 11:42:23 -0700 (PDT)
From: Peter C. Wallace p...@mesanet.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re
On Wed, 16 Jul 2014, a k wrote:
Date: Wed, 16 Jul 2014 12:30:48 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] integrator
On Sun, 13 Jul 2014, a k wrote:
Date: Sun, 13 Jul 2014 02:12:26 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Homing?
i
On Sun, 13 Jul 2014, a k wrote:
Date: Sun, 13 Jul 2014 13:47:04 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Homing?
so,
On Sun, 13 Jul 2014, a k wrote:
Date: Sun, 13 Jul 2014 15:43:40 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Homing?
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 11:26:33 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Where to get latest PncConf?
On
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current configurations pinout
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive/master.zip
IOW Peter, I'll have to rip up the current BOB wiring. I was
?
On Friday 11 July 2014 11:36:20 Peter C. Wallace did opine
[...]
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive/master.zip
The archive subdir does not exist from either this machine, or the
lathes machine, I tried both Firefox and git. ??
I didnt use git, I
?
On Friday 11 July 2014 14:45:45 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
I can do that without a lot of problems I think.
to read your current configurations pinout
Here's the latest mesaflash source:
https://github.com/micges/mesaflash/archive
?
On Friday 11 July 2014 15:04:08 Peter C. Wallace did opine
And Gene did reply:
On Fri, 11 Jul 2014, Gene Heskett wrote:
Date: Fri, 11 Jul 2014 14:57:32 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users
On Mon, 7 Jul 2014, John Thornton wrote:
Date: Mon, 07 Jul 2014 08:20:31 -0500
From: John Thornton bjt...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
On Thu, 12 Jun 2014, Rene Hopf wrote:
Date: Thu, 12 Jun 2014 12:31:22 +0200
From: Rene Hopf reneh...@mac.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Mesa 5I25
are reversed
On Sun, Jun 8, 2014 at 9:15 PM, Peter C. Wallace p...@mesanet.com
wrote:
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 21:08:26 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine
On Mon, 9 Jun 2014, a k wrote:
Date: Mon, 9 Jun 2014 13:52:55 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
On Sun, 8 Jun 2014, andy pugh wrote:
Date: Sun, 8 Jun 2014 20:06:49 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed
the input connections (P2)
On Sun, Jun 8, 2014 at 12:21 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 8 Jun 2014, andy pugh wrote:
Date: Sun, 8 Jun 2014 20:06:49 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
:15 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sun, 8 Jun 2014, a k wrote:
Date: Sun, 8 Jun 2014 21:08:26 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users
On Sat, 7 Jun 2014, Marius Alksnys wrote:
Date: Sat, 7 Jun 2014 10:49:17 +0300 (EEST)
From: Marius Alksnys marius.alks...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] How to use Mesa
On Fri, 6 Jun 2014, Gene Heskett wrote:
Date: Fri, 6 Jun 2014 13:50:05 -0400
From: Gene Heskett ghesk...@wdtv.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Either
Cordialement,
Moustapha Elhima
+33 6 09 99 21 97
P Penser à préserver l'environnement avant d'imprimer ce message. Merci
Le Jeudi 5 juin 2014 21h41, Peter C. Wallace p...@mesanet.com a écrit :
First can you move this to the EMC users list as the EMC developers
list is not and appropriate place
On Thu, 5 Jun 2014, Marius Alksnys wrote:
Date: Thu, 05 Jun 2014 14:39:51 +0300
From: Marius Alksnys marius.alks...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] How to use Mesa 7i90HD ?
On Thu, 5 Jun 2014, ELHIMA Moustapha wrote:
Date: Thu, 5 Jun 2014 01:47:43 -0700 (PDT)
From: ELHIMA Moustapha melh...@yahoo.com
To: emc-users@lists.sourceforge.net emc-users@lists.sourceforge.net,
emc2 emc-develop...@lists.sourceforge.net
Subject: [Emc-users] Step motor in closed loop
to use Mesa 7i90HD ?
On 5 June 2014 14:00, Peter C. Wallace p...@mesanet.com wrote:
It may be that for now (until
IDROM V4) that the HM2 driver needs to be patched so that if a UART is
fount
it uses hardwired stride, with maybe a complaint rather than and abort
I will try to do
First can you move this to the EMC users list as the EMC developers
list is not and appropriate place for configuration and setup information
On Thu, 5 Jun 2014,
Moustapha
Elhima wrote:
Date: Thu, 5 Jun 2014 21:19:55 +0200
From: Moustapha Elhima melh...@yahoo.com
Reply-To: EMC developers
On Tue, 3 Jun 2014, andy pugh wrote:
Date: Tue, 3 Jun 2014 17:07:45 +0100
From: andy pugh bodge...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] How to
On Tue, 3 Jun 2014, a k wrote:
Date: Tue, 3 Jun 2014 11:16:22 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Feed control
On Tue, 3 Jun 2014, Sebastian Kuzminsky wrote:
Date: Tue, 03 Jun 2014 19:45:24 -0600
From: Sebastian Kuzminsky s...@highlab.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] How to use Mesa 7i90HD ?
On 06/03/2014 10:40 AM, Peter C. Wallace
, 2014, at 5:12 PM, Peter C. Wallace p...@mesanet.com wrote:
On Fri, 23 May 2014, a k wrote:
Date: Fri, 23 May 2014 14:45:06 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users
?
On Sat, May 24, 2014 at 8:47 PM, a k pccncmach...@gmail.com wrote:
i can jog machine with 0.1 increment with P =8 i=0 d=0
now i want to make hal scop to work to i can set i and d.
slowly but i am moving.
thanks for all help!
On Sat, May 24, 2014 at 8:38 PM, Peter C. Wallace p
AM, Peter C. Wallace p...@mesanet.com
wrote:
On Fri, 23 May 2014, a k wrote:
Date: Fri, 23 May 2014 04:16:59 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC)
emc-users
On Sat, 24 May 2014, a k wrote:
Date: Sat, 24 May 2014 18:55:57 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] emc2--2.5
scale factor must be 163840 because it is simple arithmetic
8192x4x5= 163840
is this right?
Yes
On Sat, May 24, 2014 at 7:17 PM, Peter C. Wallace p...@mesanet.com wrote:
On Sat, 24 May 2014, a k wrote:
Date: Sat, 24 May 2014 18:55:57 -0700
From: a k pccncmach...@gmail.com
Reply
i do now?
there was reason that i like emc2.2
On Thu, May 22, 2014 at 12:15 PM, Peter C. Wallace p...@mesanet.comwrote:
On Thu, 22 May 2014, a k wrote:
Date: Thu, 22 May 2014 11:32:08 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users
snip--
I assume the memory pokes are non persistent, if I mess up I can remove
anything I've added then do a powerdown restart of the machine and it
should clear what I've done?
Thanks again for your time,
JHC
The
Subject: Re: [Emc-users] 5i24?
2014-05-21 0:31 GMT+03:00 Peter C. Wallace p...@mesanet.com:
(blink red light at power up and then no lights)
Yes, exactly - CR6 (red color) blinks, when power button is pressed to turn
on the computer and then there are no lights at all.
Is there any way
problem but something
else.
How i can do that --their EEPROM
data updated to the current---?
i am not complaining. thank you for all help. maybe it consumer reflex -
when thing is working it switch happiness On/Off.
On Fri, May 23, 2014 at 5:54 AM, Peter C. Wallace p...@mesanet.com wrote
On Thu, 22 May 2014, JHC wrote:
Date: Thu, 22 May 2014 13:56:40 +0100
From: JHC gd-syst...@ntlworld.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Different PWM frequencies re HostMot2 pwmgen on
On Thu, 22 May 2014, a k wrote:
Date: Thu, 22 May 2014 11:32:08 -0700
From: a k pccncmach...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] emc2--2.5
: Re: [Emc-users] 5i24?
2014-05-20 0:17 GMT+03:00 Peter C. Wallace p...@mesanet.com:
On Mon, 19 May 2014, Viesturs Lâcis wrote:
Date: Mon, 19 May 2014 18:17:07 +0300
From: [ISO-8859-13] Viesturs Lâcis viesturs.la...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users
Subject: Re: [Emc-users] 5i24?
2014-05-20 16:44 GMT+03:00 Peter C. Wallace p...@mesanet.com:
What you said before is that you could not set the PWM enables low and
suggested that there was a problem with the configuration. I verified that
the same configuration was able to conttrol the enables
On Tue, 20 May 2014, Florian Rist wrote:
Date: Tue, 20 May 2014 17:49:03 +0200
From: Florian Rist fr...@fs.tum.de
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users]
801 - 900 of 1866 matches
Mail list logo
