this would fit in with displays such as Axis and with
kinetics modules but suspect that these could work at the lower level
motion commands.
If adding plugins is already possible please excuse my ignorance and
point me to how that is possible.
Thanks
Alan
understand about function bloat and would accept
the argument that emc should be left to its core essentials( sorry have
I just contradicted myself!!).
I still think plugins are a great idea.
Alan
--
Try before you buy = See
or advice would be much appreciated.
Alan
--
Try before you buy = See our experts in action!
The most comprehensive online learning library for Microsoft developers
is just $99.99! Visual Studio, SharePoint, SQL - plus
that on the vfd I
have I would have to keep manually changing input mode on the vfd to
switch between pendant and serial input. I was hoping that I could do
this via an external switch or something similar on a different model.
Alan
application as I want to see the whole xz plane
rotated around the y axis. I am willing to have a go at modifying the
display if anyone can point me in the direction of some useful
documentation.
Thanks
Alan
-
This SF.Net email
questions
Thanks
Alan
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great prizes
Grand prize is a trip for two to an Open Source
, but it loads ok.
Alan
On Tue, 2008-09-30 at 19:48 -0500, Jeff Epler wrote:
Alex Joni has uploaded a new version of the kernel package which
includes the ftdi_sio driver. If you can, please try the new kernel
package by downloading
http://www.linuxcnc.org/hardy/dists/hardy/base/binary
a programmer for many years.
Thanks
Alan
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great prizes
Grand prize is a trip for two
got experience using pc/104 ?
So really my query is also about the future. Where will emc go if
parallel ports become a thing of the past?
Alan
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
On Thu, 2008-10-30 at 20:30 -0500, Jim Coleman wrote:
alan, have you considered replacing the fan? this seems like the cheapest
solution to me :-D and you could probably find a complete heatsink with fan
for your laptop on ebay, people part out laptops alot on there.
I took it to a local
I should know better, but I have just upgraded to ubuntu 8.1. Tried emc
and got an error. The message is below, is there a quick fix?
Alan
Print file information:
RUN_IN_PLACE=no
EMC2_DIR=
EMC2_BIN_DIR=/usr/bin
EMC2_TCL_DIR=/usr/share/emc/tcl
EMC2_SCRIPT_DIR=
EMC2_RTLIB_DIR=/usr/realtime-2.6.24
Sasa,
I would suggest using the Sound Logic THC.
They have both a cabinet and rack mount unit.
http://soundlogicus.com/Default.aspx
I've heard of several other EMC2 users who really like it.
I'll be going with one of these as soon as my table is ready too.
Alan
-Original Message-
From
it will be all that much longer.
Alan
-Original Message-
From: Sasa Vilic [mailto:sasavi...@gmail.com]
Sent: Friday, March 27, 2009 7:55 PM
To: alano...@att.net; Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] THC Systems for plasma?
I already have one. It's good, but it has
Yeah, I got bitten by going the 'bob' route too. Never again!
What I like are what http://www.vectric.com/ have to offer and their prices
are good compared to the ease of use and number of features they have.
They have a trial software download to test run it first which is nice.
Alan
p.s
are going for.
Alan
-Original Message-
From: richard_pr...@att.net [mailto:richard_pr...@att.net]
Sent: Tuesday, December 22, 2009 5:55 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] servo wiring
Let me fix the typo... I just need the pin-OUT,
Sorry folks
Gary,
No, that is not the card.
I do have one of the cards I'm talking about, but do not have a URL to point
to so you can see.
Alan
-Original Message-
From: Gary Corlew [mailto:gcor...@carolina.rr.com]
Sent: Wednesday, December 23, 2009 6:49 AM
To: alano...@att.net; 'Enhanced Machine
Don, it's worth checking out QCAD: http://www.qcad.org/
I like using it.
Thanks,
Alan
-Original Message-
From: Don Stanley [mailto:dstanley1...@gmail.com]
Sent: Wednesday, September 01, 2010 4:23 PM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] I need a CAD for Linux, free
. I've never
used their CAM or converter packages, but if they are like their CAD
offering I am sure they will work just fine.
Alan
-Original Message-
From: Igor Chudov [mailto:ichu...@gmail.com]
Sent: Wednesday, September 01, 2010 4:41 PM
To: alano...@att.net; Enhanced Machine Controller (EMC
.
Thanks
Alan
Fragment of dmesg output below
[ 253.284336] bone-capemgr bone_capemgr.8: part_number
'BB-LCNC-BEBOPRBR', version 'N/A'
[ 253.293924] bone-capemgr bone_capemgr.8: slot #7: generic override
[ 253.300511] bone-capemgr bone_capemgr.8: bone: Using override eeprom
data at slot 7
On 22/10/2013 22:12, Condit Alan wrote:
Thanks Charles,
One step forward. My monitor supports multiple inputs for HDMI (HDMI AV and
HDMI PC). I changed to HDMI PC and that fixed the overscan.
Now I will try to get the Wireless to work or try building from the cloned
git file. Does
have for creating a polar version of the goto and move functions.
Thanks
Alan
//
/* Code to produce wheels paths */
/* Using GCMC Compiler */
/* Author: Alan Battersby
On 09/11/2013 20:22, Bertho Stultiens wrote:
On 11/09/2013 07:40 PM, alan wrote:
I also think this is a good idea.
To test it I have quickly rewritten my g-code wheels program see
attached file.
It currently works only for paths cut in XY plane using XY movements. I
cannot check
reliability usefulness etc? As an alternative I am thinking
of getting a mesa 5i25 + 2 7i78 daughter cards would this be the better
option?
thanks
Alan
--
Live Security Virtual Conference
Exclusive live event will cover all
What about EMCNC?
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online
on
with making LinuxCNC the best CNC controller software on the planet (assuming
that it isn't already that???).
I used to practice law and my general opinion is that lawsuits generally
benefit no-one but the lawyers (win or lose). That is not the way that I would
choose to spend my time.
Alan
On Jan 23, 2012, at 2:17 AM, andy pugh bodge...@gmail.com wrote:
Does anyone else indent their loops and subs in G-code?
me
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
invalid code.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online learning
.
--
atp
Gee, I bet that news would surprise Kernigan and Ritchie. I've been using
strings in 'C' since 1977.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
video card/driver for LinuxCNC?
2012/2/19 Alan Browning ajbrowning2...@yahoo.com:
I'm in the beginning stages of planning a DIY CNC machine using Ubuntu and
LinuxCNC. The Problematic Hardware section of the doc says that onboard video
is problematic.
I think that the statement about onboard
I'll take your advice. I can afford investments of my time more than
investments of my money at this point.
Alan
From: Viesturs Lācis viesturs.la...@gmail.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Sunday, February 19
.0.pin-15-in ??
axis.0.pos-lim-sw-in or what?
Thanks in advance for any help,
Alan
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
) and I don't see anything that tells emc2 to set that pin.
Help!!
Alan
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions
I have read the part of the manual on gcode, and can't find anything
that describes the meaning of the L2 when using the G10 code. Can
some one tell me what it means?
Thanks,
Alan
-
Take Surveys. Earn Cash. Influence
,
Alan
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT business topics through brief surveys-and earn cash
http
and in the process trashed linux, so right now I am
in the process of a total reinstall.
Is dpkg -i what I should use?
Thanks,
Alan
---
On Mar 17, 2007, at Mar 17, 2007--2:08 PM, emc-users-
[EMAIL PROTECTED] wrote:
Message: 10
Date: Sat, 17 Mar 2007 16:08:45 -0500
From: Chris Radek [EMAIL PROTECTED
the interpreter would be great.
Now I have to figure out how to set the origin (0,0) at a different
location temporarily.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
On Apr 18, 2007, at Apr 18, 2007--9:58 AM, emc-users-
[EMAIL PROTECTED
I am always impressed by how quickly and knowledgeably John answers
peoples questions. (Not that he alone carries the load.) I am very
grateful to all those who help everyone that is just getting started.
My thanks,
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acondit
O100 CALL [#512] [#514] (pass the variables or values that you want
to use as local parameters)
Good luck,
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
On Aug 16, 2007, at Aug 16, 2007--3:23 PM, emc-users-
[EMAIL PROTECTED
of time debugging. I also know their limitations,
so if I need to do something new and unique I can decide whether it
should be generalized as a modification to my starter file or just a
quick and dirty routine for that job.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email
no parallel
ports). USB or ethernet look like the most likely prospects. The
solution may be to use something like G100 or ARC100 at the machine
and axis running remote but, we can always dream that someone will
find a solution to allow EMC2 to operate over USB or ethernet.
Alan
---
Alan
I would really like to do is to run Axis on the
Mac. Is it feasible to provide nml messaging extensions (or some
other mechanism) that would allow Axis or other gui interfaces to
talk remote to EMC2.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home
. Is there some config/setup
information I have not put in somewhere?
Alan
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01
G03X1.0303Y1.3I0.0J0.375
G02X2.5Y2.5I1.4697J-0.3
G01X6.5Y2.5
G02X7.9697Y1.3I0.0J-1.5
G03X8.3371Y1.0I0.3674J0.075
G01X9.0Y1.0F50.0
X9.0Y0.0
X7.0Y0.0
X7.0Y0.5
G03X6.0Y1.5I-1.0J0.0
G01X3.0Y1.5
G03X2.0Y0.5I0.0J-1.0
G01X2.0Y0.0
X0.0Y0.0
G00Z3.0
G40
m02
Thanks,
Alan
to draw the correct tool path and it runs OK on the
simulator.
The reason that I put the whole program in was that I hoped someone
could run it (cutting air) and show me what I am doing wrong.
Alan
Alan Condit wrote:
Hi all,
I am trying to figure out Cutter radius compensation
Chris,
Chris Radek [EMAIL PROTECTED] writes:
On Wed, Oct 10, 2007 at 11:42:55AM -0700, Alan Condit wrote:
Well, I tried it again this morning and it worked. The only thing I
did different was to move the G40 ahead of the G01 on the one line
and move the G41 D4 ahead of the G01
Alan Condit [EMAIL PROTECTED] writes:
I read the article in the wiki that SWP pointed out recently. It generated a
question. What file does one find the variables steplen, stepspace, dirsetup
and dirhold in?
Alan
with the ini files from my router.
I assume this means I need to clear out the stuff related to seeking home
switches for this to work?
Alan
-
SF.Net email is sponsored by: The Future of Linux Business White Paper
from Novell
to a particular location (may be
different for each different part) and set that location to be X0Z0. How do I do
that?
Alan
-
SF.Net email is sponsored by: The Future of Linux Business White Paper
from Novell. From the desktop
encoders but they don't have an index. Can I use a
single pulse wheel that is mounted on my lathe spindle with an optical switch
(functions as a tach) as the source of the index signal?
Alan
-
SF.Net email is sponsored
Kirk Wallace [EMAIL PROTECTED] writes:
Alan, can you provide more information on what lathe you have and what
you have done as part of the conversion?
Kirk,
My lathe is a piker compared to yours. I have a 9x20 Grizzly. You can see some
stuff about my conversion on my website. http
candcnc_pinout.hal as it uses slightly
different pinouts for things like charge pump/enable, estop, home and limits.
This might help anyone else using a CandCNC BOB to get running quicker.
Thanks,
Alan
-
SF.Net email is sponsored by:
Check
. In that it
appears to be correct.
My working ini and hal files are derived from stepper_in.ini and
xylotex_pinout.hal and those files are considerably different from the files
generated by stepconf. On the hal files diff basically doesn't find any common
lines to anchor on.
Alan
working config, to match the acceleration in the stepconf files that
are not working, and everything runs fine with my working config files. So that
is not what is causing the problem.
Alan
-
SF.Net email is sponsored
Y working but
I haven't been able to identify what causes y to work.
I have the enables for all three axii drive enables tied to pin 17.
The other thing that I notice is that stepspace is set to zero but that is also
true for all three axii.
Do you have any ideas?
Alan
as close as I can get
them.
Can anyone see what is keeping the x axis from running???
Thanks,
Alan
-
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
Chris Radek [EMAIL PROTECTED] writes:
On Tue, Dec 11, 2007 at 05:43:42PM +, Alan Condit wrote:
Can anyone see what is keeping the x axis from running???
Well what did you do that fixed Y?
Chris,
I rebooted the machine. Honestly, one time when I would start it up Y would work
15 or twenty
seconds).
Alan
-
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy
Alan Condit [EMAIL PROTECTED] writes:
After reading the documentation, I believe that I had mis-interpreted the
meaning of dirsetup and dirhold.
I tried these parameters for my drives:
steplen = 25000
stepspace = 25000
dirsetup = 2000
dirhold
to run linux/emc2.
I decided I would rather spend my time learning gcode than ppc assembly code.
I now have an Intel Mac but still use a cheap pc box for my EMC2/linux.
Alan
-
This SF.net email is sponsored by: Microsoft
Chris Radek [EMAIL PROTECTED] writes:
Since emc 2.2, it's been possible to build sim on a mac. I do this
on mine, but I think mine's a G3, not a G4.
Chris,
You are talking about building sim on linux on the mac, not OS X right?
Alan
addf parport.0.write base-thread -1
addf parport.1.write base-thread -1
Any help greatly appreciated.
Alan
-
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything
with the various addresses.
Help please.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
-
Check out the new SourceForge.net Marketplace.
It's the best place
the whole list of ports on both connectors without any
luck when I had left the 0x378 in the config statement as the second
port (without adding the necessary reads and writes).
Can anyone explain why that won't work? And what does the 1 or
-1 after the read or write command mean?
Alan
---
Alan
need add the port
address to the hal_parport config statement and to add read and write
functions to the appropriate thread (since I am running steppers it
was the base-thread). Then you need to add the pin and signal
connections to do what ever provoked the need for a second port.
Alan
.write base-thread -1
# The following two lines are needed if you are running Double step
addf parport.0.reset base-thread
addf parport.1.reset base-thread
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
On Jun 12, 2008, at Jun 12
aaron Moore [EMAIL PROTECTED] writes:
Alan
Thanks for reply.
I am using steppers, so do I add my read and writes to the servo thread or the
base
thread?
My .hal file still has all the original configuration lines in, which I know
work... will
it run once I make these changes
saw that last year there was some discussion that usb to
parallel connectors were unsuitable. Can someone confirm if this is
still the case please.
Thanks
Alan
-
This SF.Net email is sponsored by the Moblin Your Move
or a symlink within one of the existing
distribution directory setups to the other repository? Or does this
also run afoul of the technical details of debian package archive
signing.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
this should be added to
the documentation.
Thanks,
Alan
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK win great prizes
Grand prize
the screw is 4 tpi, is it a single start or 2
start thread?
These would not get you to 1250 scale but would get you to ~1417.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- [EMAIL PROTECTED]
Home-Office (503) 982-0906
use Firefox on the
Mac and have never seen those kind of problems. I am suspicious of
Hotmail doing something strange, but since I don't use Safari, I
can't vouch for it either.
Alan
--
This SF.net email
parallel port card in my PCI slot, so adding a separate
video card is not a desireable option.
Any other suggestions.
Alan
--
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story
...@lists.sourceforge.net
On Mon, Jan 12, 2009 at 08:05:53PM -0800, Alan Condit wrote:
OK, I finally got my machine hooked up to the web for long enough to
do all the updates and got EMC2-2.2.8 running. Now I am still getting
the venetian blinds. I tried all the fixes that I could find, but no
joy in Mudville. My
From: Chris Radek ch...@timeguy.com
Date: Monday2009January 12 Monday2009January 129:07:21 PM PST
On Mon, Jan 12, 2009 at 08:05:53PM -0800, Alan Condit wrote:
OK, I finally got my machine hooked up to the web for long enough to
do all the updates and got EMC2-2.2.8 running. Now I am still
many people who contribute and have contributed, that a
board couldn't function with all of them on it.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
I had a 7” LCD cape on order from Mouser for several months and finally gave up
and cancelled the order.
Does anyone have any suggestions for a good 7” LCD touch screen to use with the
BBB and LinuxCNC?
Alan
--
Learn
for velocity mode. Does this require encoders on the steppers?
Thanks in advance,
Alan
--
Slashdot TV. Video for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gampad/clk?id=160591471iu=/4140/ostg.clktrk
?
Thanks in advance,
Alan
--
Slashdot TV. Video for Nerds. Stuff that Matters.
http://pubads.g.doubleclick.net/gampad/clk?id=160591471iu=/4140/ostg.clktrk
___
Emc-users mailing list
? With the appropriate hal
connections (and possibly support circuitry) one could use the dir line to
control a DPDT relay.
Alan
From: andy pugh bodge...@gmail.com
Subject: Re: [Emc-users] 7i43 to control spindle speed
Date: September 26, 2014 at 5:09:03 AM PDT
To: Enhanced Machine Controller (EMC
something in the middle of a thread where
someone was setting up a closed system and I missed the part about closed loop.
I don’t have encoders for my steppers (yet). So I will initially set up
position mode.
Alan
On Sep 26, 2014, at 5:44 AM, andy pugh bodge...@gmail.com wrote:
From: andy pugh
these codes in a file and load.
What am I doing wrong?
Thanks
Alan
--
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using
help.
Thank you,
-Alan Kilian (bobodyne.com)
--
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http
, but unfortunately I using opensuse 11 at present
so have not got immediate access to emc2. So my final question, is it a
big job to compile emc2 under opensuse,? If not I will download from svn
and have a go or has someone already done it?
Thanks,
Alan
+ years ago and did some then, but have spent
the last 25+ years in computing.
Hope that someone here will offer an opinion and I apologize in advance
if you think this post is off topic.
Alan
--
Stay on top of everything
be equally important to me.
Thanks
Alan
--
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM) conference, June 2-5, 2009, San
...
axis_manualtoolchange.hal:1: execv(hal_manualtoolchange) failed
axis_manualtoolchange.hal:1: hal_manualtoolchange exited without
becoming ready
Shutting down and cleaning up EMC2...
Cleanup done
Can some tell me what to do to remove this problem.
Thanks
Alan
axis_manualtoolchange.hal:1: hal_manualtoolchange exited without
becoming ready
Shutting down and cleaning up EMC2...
Cleanup done
Can some tell me what to do to remove this problem.
Thanks
Alan
--
Stay on top of everything
but jeff your
magic touch obviously works across the internet.
Thanks
Alan
--
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM
the
motion.motion-inpos error and then it froze. So next I tried running
stepconf on an existing config and when I tried to load emc2 again
the system froze. Finally, I ran stepconf and built a new config from
scratch, but when I started emc2 it still froze.
HELP!!!
Alan
---
Alan Condit
From: Alex Joni alex.j...@ro... - 2009-05-16 22:33
Alex wrote:
Was there another version that ran ok on that machine?
If yes, what kind (OS version, emc2 version etc)
Regards,
Alex
Alex,
I was running EMC2 2.2.8 on Dapper (6.06).
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn
work on my other box but it worked on this one.
Thanks again,
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
On May 16, 2009, at May 16, 2009--7:30 PM, emc-users-
requ...@lists.sourceforge.net wrote:
From: Alex Joni alex.j
Hi ,
I am trying to generate gcode automatically but seem to have a problem.
Can anyone tell me why I get the error message
near line 27 bad character '*' used
in this code running on axis on emc 2.4.0 simulator
thanks
Alan
()
(Date: 27/05/2009 00:00:00
moves to miss
clamps or the like, having them blended could be dangerous.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Crystal Reports - New Free Runtime
under some circumstance, I would definitely consider it to be
a bug.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Crystal Reports - New Free Runtime
doesn't show any preview
of the code.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Crystal Reports - New Free Runtime and 30 Day Trial
Check out
but the change that breaks it has me stumped for the
minute.
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
--
Crystal Reports - New Free Runtime and 30 Day
of the
subroutine to be called).
oCallSubSub call [CutOutside] [-0.1161] [-0.0062]
Is this a bug? Is there a work around (using named o-words) at the
moment?
Alan
---
Alan Condit
1085 Tierra Ct.
Woodburn, OR 97071
Email -- acon...@ipns.com
Home-Office (503) 982-0906
.
Thanks
Alan
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
this ( probing the surface that
is). Any suggestions or help would be appreciated.
Thanks
Alan
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net
.
Thanks
Alan
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
1 - 100 of 260 matches
Mail list logo