Barry Skidmore writes:
OS: 5.1-RELEASE
FreeBSD 5.1-CURRENT #0: Tue Oct 21 23:17:38 EDT 2003
UPS: Back-UPS 650, serial interface
Back-UPS Pro 650, serial interface
Cable: 940-0020B
940-0095A
With the above setup apcupsd detects a power failure, but not a
return of
Juan...I need helpful info on how to install the xfree...I have no clue as how to do
this...
I have a laptop with the 340m and need drivers to improve its performance..what isthe
xfree and how exactly does it work??
thank you...hope u can help
Ian Cole
dallas tx
I need help installing (and understanding) the xfree patch for my 340m...ok im a dodo
but i nd help!!
perhaps a simple step by step if you dont mind,,
what is the xfreeand how does it work..where to download etc.
im desperate to improve the performance of this dam laptop.
plase
Dear sir'
I want to control users per ip accounting. Now I using FreeBSD 5.0 and
IPFW2. How I enable IPACCT and how configure.
Best regards
Doloonkhuch.A
___
[EMAIL PROTECTED] mailing list
Hello Mihail,
Try to re-burn your netcard. Disable PnP and set up I/O port and IRQ
properly. For instance, I/O range assign to 220h-etc... in that way
not to conflict with other hardware on your system of course. I had
the same problems with Intel netcards. Re-burning and getting rid of
PnP shit
Thanks list,
I'm happy to say that my nic problem
is now resolved. Thank you for your
help. After I disabled PnP everything
worked well.
Thanks,
Mihail
-
Hot Mobiil - helinad, logod ja piltsõnumid!
http://portal.hot.ee
Hi Tony,
I would use cvsup to update your ports tree.
You can use %make buildworld, to reinstall system
perl. Look in /etc/make.conf for NOPERL var to
unset accordingly to if you want to build it
or not.
You can also try to install perl from ports. Then
you can use %use.perl ports, or
On Mon, 8 Dec 2003, Michael A. Alestock wrote:
What does this message mean??...
No debugger in kernel
Dec 8 17:40:05 bsd /kernel: No debugger in kernel
I hope it isn't anything serious???
I haven't changed or altered anything in a long time.
It probably means you accidentally typed the
Hello,
The folowing is a fragment of my rc.firewall which must allow all
traffic in and out of my named.
ipfw add 4100 allow udp from me to any 53 keep-state
ipfw add 4200 allow udp from any to me 53
ipfw add 4300 allow udp from me 53 to any
---
This is a fragment from my kernel
${fwcmd} add allow udp from any 1024-65535,53 to any 53
${fwcmd} add allow udp from any 53 to any 1024-65535
- Original Message -
From: Gregory Edigarov [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 5:32 PM
Subject: ipfw keep-state (ASAP anwser need)
Hello,
I would suggest
ipfw add 4100 allow udp from me to any 53 keep-state
ipfw add 4200 allow udp from any to me 53 keep-state
which allows either side to initiate the connection. You will also need TCP
versions of these rules (DNS uses both).
If you use ipfw2, which is the default in 5.x,
On Mon, 8 Dec 2003, Tony Jones wrote:
Hi.
Over time I've got into the habit of either using packages or building
directly from the source. Last time I tried this (Postfix) and asked a Q
here, I was rapped over the knuckles :-) and told to use the Ports.
Right now I'm trying to build
Hi all,
has anyone got a radeon 7000 to work with dual head?
This card is the one with 2 15 pin d9 shell size connectors.
I'm running Freebsd 4.9 and have upgraded X to the pre release version
XFree86 4.3.99.12.
All the examples I have got off the net dont work, I keep getting
screen0 doesn't
Hi,
I have been using FreeBSD for some time now, and kind of figured out how
the ports system functions.
In order to administrate my system I am using portupgrade, which works
very well for me.
However lately I have also used Perl CPAN to install some perl modules.
When I get a list of
the
short:
Yes.
long:
You must check if all components in the x335 are supported by
FreeBSD5.1, specifically all the controllers, e.g. scsi and nic.
Unfortunately the specs from IBM do not tell which chips are used,
but as You seem to work for IBM I guess You will be able to get
more in detail
Have you perhaps deleted your rules? Check with
ipfw list
and make sure they are all there.
Use /var/log/security to find which rule is denying the packets. If it's the
default rule 65535, then your allow rules are somehow incorrect.
- Original Message -
From: Gregory Edigarov
On Mon, 8 Dec 2003 21:52:54 -0800 (PST)
Scott I. Remick [EMAIL PROTECTED] probably wrote:
--- Sergey 'DoubleF' Zaharchenko [EMAIL PROTECTED] wrote:
I wonder what did destroy it. Of course, system crashes can do wonders,
but...
Well, I was trying to save a file to that drive when my
Hi,
IPX network number is 33A95AF6. Do I need to use this
as ifconfig_fxp0_ipx=ipx 33A95AF6. Any way I can
change this from command line instead of rebooting my
box?
Thank you in advance.
regards,
feroz
--- Cristian Salan [EMAIL PROTECTED] wrote: On Mon,
Dec 08, 2003 at 11:51:55AM +,
On Tue, Dec 09, 2003 at 12:22:02PM +, Feroz F. Basir wrote:
IPX network number is 33A95AF6. Do I need to use this
as ifconfig_fxp0_ipx=ipx 33A95AF6. Any way I can
change this from command line instead of rebooting my
box?
Yes. Just run ifconfig(8) directly:
# ifconfig fxp0 ipx
Hi,
I have a heavily used threaded server program running on one of my Dell Poweredge 1750
servers. Its a statistical analysis package for websites. Currently it analyses over
60 million requests a day, which (because of many different reasons) causes it to
handle around 120 million http
Valerian Galeru wrote:
Please, if you know, tell me any sites with
documentation about sh scripts(for beginners)(i mean
files with .sh extension). Thank you!
Check out the book The Unix Programming Environment by Kernighan and Pike.
As computer books go, it's considered a classic.
Though not
Dear
I would like to down load the free bsd,I all ready tryd on the url :free bsd
org but I am unable to down load it, since the down load source is FTP and
I don't know how to down load an FTP file !! So please could you suggest me
how /where can I down load the free bsd in a simple manner
Hello
I use FreeBSD4.7
On script, how can I run the function of return/enter key ?
thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I use FreeBSD4.7
On script, how can I run the function of return/enter key ?
Depends on what type of script. In a Perl script, you can do this so the
user has to interact with the keyboard:
$userVar = ;
and then you could potentially do some ASCII checking to make sure it
was the enter key
On Tue, 9 Dec 2003 17:03, Cristian Salan wrote:
On Mon, Dec 08, 2003 at 11:51:55AM +, Feroz F. Basir wrote:
Hi,
I read your email to freebsd mailing list. You be able
to mount nwfs under freebsd. I'm trying to mount nwfs
as well but failed for some reason. I compiled in IPX,
NCP
When connecting via ssh to my FBSD boxes, it takes over a minute before the
connection is established. Searching the archives suggests that this is due
to a failed reverse DNS lookup that must time out before connecting.
Suggestions include adding the hosts to the local host file which I've done.
Ian,
I have the same graphics card, and XFree86 seemed to detect it
automagically. I even have working GL drivers. Performance isn't the
best, and the GL is a little choppy, but I'm not looking at gaming on
this machine.
Eric F Crist
President
AdTech Integrated Systems, Inc
(612) 998-3588
On Mon, Dec 08, 2003 at 10:17:48PM -0700, Troy wrote:
Hello,
I found a command a few days ago that would allow a user to type in the
command + time in minutes then it would allow a person to continue to
work, when the time was up it would let you know and that was it. Can
someone please
On Tue, Dec 09, 2003 at 04:20:46PM -0800, Doloonkhuch wrote:
I want to control users per ip accounting. Now I using FreeBSD 5.0 and
IPFW2. How I enable IPACCT and how configure.
Just configure your ipfw rules to count traffic for each user on your
system. I'll include my custom ipfw startup
Xpression [EMAIL PROTECTED] writes:
Hi list, I've a FreeBSD-4.5 server running tacacs+, exim and
popa3d, it's working fine, no problem, but sometimes when I
reboot via: name_server# reboot I see this message...
Waiting for ..
Waiting for ..
Waiting for ..
Syncing
On 08/12/03 19:05 -0800, Marco wrote:
Dear
I would like to down load the free bsd,I all ready tryd on the url :free bsd
org but I am unable to down load it, since the down load source is FTP and
I don't know how to down load an FTP file !! So please could you suggest me
how /where can I
David Carter-Hitchin [EMAIL PROTECTED] writes:
Anyone got a clue why this is happening? Should I pkg_delete acroread-3
and reinstall? I googled this one with no luck.
I don't think acroread-3 has been in the ports system in quite some
time. I think the 'conflicts' support post-dates it, so
Hello all.
I've found this : http://ofca.pl/bsdident/
thsi is a patch for oidentd 2.0.7 and natd + libalias under freebsd
4.8
It used to work for me, but my HDD have died. so i downlaoded 4.9.iso,
burned, upgraded kernel source, and now can't patch ne libalias/natd
Could someone implement this
On 09/12/03 05:50 -0800, Drew Tomlinson wrote:
When connecting via ssh to my FBSD boxes, it takes over a minute before the
connection is established. Searching the archives suggests that this is due
to a failed reverse DNS lookup that must time out before connecting.
Suggestions include
--- Michael Sig Birkmose [EMAIL PROTECTED] wrote:
However lately I have also used Perl CPAN to install some perl modules.
When I get a list of
the packages I need to upgrade (portversion -l \) these packages also
shows up - why?
I recently went through this, and although no expert, here's
Dear
I would like to down load the free bsd,I all ready tryd on the url :free =
bsd
org but I am unable to down load it, since the down load source is FTP =
and
I don't know how to down load an FTP file !! So please could you suggest =
me
how /where can I down load the free bsd in a
So, I hope this is the right address for this type of
question. If not would you please forward this and/or
let me know the correct address.
Is it a text or binary file?
First, I suggest working from a copy of the file for safety sake.
For a text file, Use vi. Count down to which line is
You forgot to Cc: list, so here it is:
Could you give me an example ?
start script
#!/usr/bin/perl
print (Hit any key: );
$userVar = ;
if ($userVar eq \n) {
print You hit the enter key!\n;
} else {
print You did not only hit the enter key!\n;
}
end script
--- HOLLOW, CHRISTOPHER [EMAIL PROTECTED]
wrote:
Hi...
I have the same UPS and cable running with
apcupsd on FreeBSD 4.8. I
have nothing but good things to say about the UPS
and apcupsd. Detects
and reports power failures and power restores.
Properly halts the
system upon
./[EMAIL PROTECTED] wrote:
${fwcmd} add allow udp from any 1024-65535,53 to any 53
${fwcmd} add allow udp from any 53 to any 1024-65535
That ruleset is a really bad idea. Imagine the following scenario: You
run a vulnerable service (bind, sendmail, you name it), Joe Haxor
launches a exploit
Hi again list, I've posted a question recently about
uninstalling packages, in fact, when I installing changin
the prefix path (eg.--prefix=/usr/local/package_name) it
creates me some subdirs. The trouble is that I can't execute
any installed program, until I put, for example: cd
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages per minute. When using
Windows that's not a problem. But using FreeBSD (with lpd configured with
help of Apsfilter from the ports) it prints very slowly, I guess
Hello. I am running apache+mod_ssl-1.3.29+2.8.16 with
mod_php4-4.3.4_2,1 on FreeBSD 4.8-p13. Everything works fine.
However, upon shutting down apache (/usr/local/etc/rc.d/apache.sh
stop), apache dumps core. The following are the syslog entries to
the console:
pid 13918 (httpd), uid 80: exited on
Hi all,
I was banging my head against the wall too long yesterday, so I have
broken down, and have to ask. Any help on this matter is greatly
appreciated.
Here is what I'm trying to do. I have two computers, both running 4.8,
clean, minimal installs. They have two serial cables connected to
- Original Message -
From: Jason Stewart [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 6:21 AM
On 09/12/03 05:50 -0800, Drew Tomlinson wrote:
When connecting via ssh to my FBSD boxes, it takes over a minute
before the
connection is established. Searching the archives suggests
Troy wrote:
Hello,
I found a command a few days ago that would allow a user to type in
the command + time in minutes then it would allow a person to continue
to work, when the time was up it would let you know and that was it.
Can someone please refresh my memory as to what that command
In Greg's Lehey's book The Complete FreeBSD (3rd ed) on page 379
there is a script for combining the make buildworld process. I'm
thinking there may be new tags for FBSD 4.9-RELEASE that should be
included in the script that are not there.
anyone know of an updated script like this one to
Xpression wrote:
Hi again list, I've posted a question recently about
uninstalling packages, in fact, when I installing changin
the prefix path (eg.--prefix=/usr/local/package_name) it
creates me some subdirs. The trouble is that I can't execute
any installed program, until I put, for example: cd
On Dec 8, 2003, at 8:51 PM, homeyra g wrote:
Here is the question: How to truncate a file from the
begining to a certain point in the file?
The question is whether this file is ASCII text so line-based tools
(such as tail) work, or whether you are truncating a binary file, in
which case split -b
Besides the built in FTP server started by inetd,
does FBSD have any other built in FTP servers?
I ask because FBSD comes with 2 built in firewall applications.
Does the FBSD built in FTP client transmit the login ID pw in
clear text?
___
[EMAIL
On Tue, 9 Dec 2003, Marco Beishuizen wrote:
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages per minute. When using
Windows that's not a problem. But using FreeBSD (with lpd configured with
help of Apsfilter
On Dec 9, 2003, at 1:06 PM, fbsd_user wrote:
Besides the built in FTP server started by inetd,
does FBSD have any other built in FTP servers?
locate ftpd would answer your question, BTW, but yes: besides the
stock ftpd, there is also lukemftpd and tftpd. Other good choices from
the ports
On Tue, 9 Dec 2003, fbsd_user wrote:
Besides the built in FTP server started by inetd,
does FBSD have any other built in FTP servers?
I ask because FBSD comes with 2 built in firewall applications.
Does the FBSD built in FTP client transmit the login ID pw in
clear text?
I never used
On Tuesday 09 December 2003 12:19 pm, Peter Ulrich Kruppa wrote:
On Tue, 9 Dec 2003, Marco Beishuizen wrote:
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages per minute. When using
Windows that's not a
I am on a cable modem and am running an http server, natd, the Usual
Suspects, and have been doing this for a couple of years. I use dhcp to
get the address for my externally-facing NIC and through reboots, power
outages, even changes in network ownership (@ home - ATT - comcast)
all has been
On Tue, 9 Dec 2003, Fabian Thylmann wrote:
I have a heavily used threaded server program running on one of my Dell
Poweredge 1750 servers. Its a statistical analysis package for websites.
Currently it analyses over 60 million requests a day, which (because of
many different reasons) causes it
On Tue, 09 Dec 2003 15:14:38 +1300
Richard Shea [EMAIL PROTECTED] wrote:
On Mon, 8 Dec 2003 15:40:39 -0800, Chris Pressey
[EMAIL PROTECTED] said:
On Tue, 09 Dec 2003 12:00:15 +1300
Richard Shea [EMAIL PROTECTED] wrote:
[...]
=== Generating temporary packing list
** Missing
On Tue, Dec 09, 2003 at 11:06:44AM -0500, Xpression wrote:
Hi again list, I've posted a question recently about
uninstalling packages, in fact, when I installing changin
the prefix path (eg.--prefix=/usr/local/package_name) it
creates me some subdirs. The trouble is that I can't execute
any
On 09-Dec-2003 Daniel Goepp wrote:
Hi all,
I was banging my head against the wall too long yesterday, so I have
broken down, and have to ask. Any help on this matter is greatly
appreciated.
Here is what I'm trying to do. I have two computers, both running 4.8,
clean, minimal installs.
Note: recently asked, I tried someone's suggestion, still can't do it.
How do i associate my usb printer with ulpt0, rather than the ugen0 that
it boots up with?
Original question and data repeated below, the only difference is:
- My officejet k80xi usb printer is the only usb equipment
On Tue, 9 Dec 2003, Peter Ulrich Kruppa wrote:
I never used this, but I know there is sftp and sftp-server
on your system, which use ssh-encryption and -protocol.
Since your question made me curious: sftp-server is started
automatically with sshd (i.e. you probably have it running
now) and
On Tue, 9 Dec 2003 12:29:15 -0600, Charles Howse wrote:
With all due respect, do you know for a fact that your suggestion works?
I have a HP1100, configured with apsfilter, and I have tried that very same
thing, and it only prints at 600 dpi.
Does anyone know the correct driver for the
On Tue, 9 Dec 2003, Charles Howse wrote:
On Tuesday 09 December 2003 12:19 pm, Peter Ulrich Kruppa wrote:
On Tue, 9 Dec 2003, Marco Beishuizen wrote:
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages
On Tue, 9 Dec 2003, DAVID THOMPSON wrote:
I am a relatively new FreeBSD user and I have never posted a request
for help before so I hope I am doing this right and not plugging up the
board with irrelevant and out of context questions. My apologies if I
am. Here is my problem:
Welcome to the
I am trying to install mod_php4/apache2 on a new install of 5.1. The
install failed because of egcs - says it should be updated. Sorry I can't
provide the exact messages, they scrolled off the screen, long gone now. I
tried to update egcs by installing the egcs-1.1.2 port but it says it is
On Tuesday 09 December 2003 01:04 pm, Scott I. Remick wrote:
On Tue, 9 Dec 2003 12:29:15 -0600, Charles Howse wrote:
With all due respect, do you know for a fact that your suggestion works?
I have a HP1100, configured with apsfilter, and I have tried that very
same thing, and it only prints
On Tuesday 09 December 2003 01:18 pm, Peter Ulrich Kruppa wrote:
On Tue, 9 Dec 2003, Charles Howse wrote:
On Tuesday 09 December 2003 12:19 pm, Peter Ulrich Kruppa wrote:
On Tue, 9 Dec 2003, Marco Beishuizen wrote:
Hello,
I own a HP LaserJet 2100, connected to my home network.
I never used this, but I know there is sftp and sftp-server
on your system, which use ssh-encryption and -protocol.
Since your question made me curious: sftp-server is started
automatically with sshd (i.e. you probably have it running
now) and there is a small gpl'ed sftp client
for
Hi Robert,
thanks for the reply, and yea, totally forgot the version. its 4.9.
Now, the problem is:
1) I can not use linuxthreads since my server is also multiplexing via
kqueue's and I can not find any version of linuxthreads which implements a
thread-safe version of kqueue.
2) I can not use
That was it!!!
Thank you sir,
Troy
On Dec 9, 2003, at 10:03 AM, Kevin D. Kinsey, DaleCo, S.P. wrote:
Troy wrote:
Hello,
I found a command a few days ago that would allow a user to type in
the command + time in minutes then it would allow a person to
continue to work, when the time was up it
On Tue, 9 Dec 2003, Fabian Thylmann wrote:
thanks for the reply, and yea, totally forgot the version. its 4.9.
Now, the problem is:
1) I can not use linuxthreads since my server is also multiplexing via
kqueue's and I can not find any version of linuxthreads which implements a
Hi Simon Barner ,
First thanks for your answer . Please correct me if I mis understand
something .
1) You mean if I want to keep source up-to-date method and use make world
process I must test it another test machine before apply it to the
production server .
2) You said that
Tried to update my old apache+ssl to the latest and am getting the following
error:
making all in tools...
=== Installing for openssl-0.9.7c
=== Generating temporary packing list
=== Checking if security/openssl already installed
ln: illegal option -- h
usage: ln [-fisv] file1 file2
ln
Hi ,
I'm using freebsd-update1.5 When I try to update it's giving an error ,
I checked from web site I think that file is not available after that I
check http://update.daemonology.net/4.9/pub.key it's Ok . ??!?!?!?
bash-2.05b# freebsd-update -v fetch
Fetching public key...
fetch:
Hmm. Kqueue should be thread-safe in that it's a system call, but I can't
speak to the safety of various arguments/parameters. I don't know if
linuxthreads tries to provide locking around file descriptors and might
have reference problems if kqueue were held over a call to close(), but it
At 22:19 09/12/2003 +0200, Vahric MUHTARYAN wrote:
bash-2.05b# freebsd-update -v fetch
Fetching public key...
fetch: http://update.daemonology.net/5.1/pub.key: Not Found
Error fetching updates
According to uname, you're running FreeBSD 5.1. I'm not building
updates for 5.1-RELEASE yet; thanks
Vahric MUHTARYAN wrote:
Hi Simon Barner ,
First thanks for your answer . Please correct me if I mis understand
something .
1) You mean if I want to keep source up-to-date method and use make world
process I must test it another test machine before apply it to the
production server .
I
2) You said that FreeBSD was more than a kernel . What do you mean
Could you explain little more or Do you know any documantation or
whitepaper
which explain mind of the FreeBSD operating System .
Hmm, try www.freebsd.org (sic).
These two areas should be partiularly useful.
Hi,
I just recently installed freebsd 4.9 on a DEC PWS 500au. Everything
works fine except X. I realize that the problem more than likely isn't
FreeBSD specific, its probably a problem with XFree but I thought you
guys may be able to give me some advice. When I try to run xf86cfg to
configure
Barry Skidmore wrote:
Are there any users of apcupsd on the list? If so, please respond to me
privately. I have a question about recommended UPS's that work well
with FreeBSD.
I have used apcupsd before. I have an ancient old APC Back-UPS Pro 420
with serial cable, and everything was
Steve Bertrand wrote:
Sftp is great, and also loaded up by default is 'scp', which is the
Secure 'copy' program. From *nix to *nix, it is an effective way to copy
files to/from remote computers just as if they were local file systems:
From local to remote
# scp thisfile [EMAIL
Hi.
I have a question, can I use the Apache1.3_frontpage and mod_php? I love
how easy it was to get frontpage working with apache it was a nightmare
under linux. But I have a need for php as well.
I am currently using 4.9.
Payne
___
[EMAIL
of course you can . both of them are modules and if you add those modules to
httpd.conf you can use it ( if you install those to modules with using ports
collection it's automaticly update it )
Vahric
- Original Message -
From: Payne [EMAIL PROTECTED]
To: freebsd-questions [EMAIL
Hello.
I have a server with two ISP connections: a flat ADSL with an ISP and pay-per-traffic
HDSL with another.
I'd like to use ADSL whenever possible, but switch to HDSL in case the first line
drops.
Any pointer?
bye Thanks
av.
___
Hi list...I've a very low bandwidth and I need to download
any of 5-RELEASES, do I need to download disc1 or mini-disc,
I only need a fully functional OS with networking not
packages, thanks...
___
[EMAIL PROTECTED] mailing list
Please tell me how you did it.
My build always fails.
I have /usr/local/linux-sun-jdk1.4.2 working.
[EMAIL PROTECTED] /usr/local/linux-sun-jdk1.4.2/bin]# ./java -version
java version 1.4.2_02
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_02-b03)
Java HotSpot(TM) Client VM (build
Hi,
Thanks, yes FreeBSD rocks!!! I know this is the right place to ask, so
if you have the apache group list that would be nice, but what do I have
to do to get my users account to work? Are they place for example
/home/user_x/public_html
On any web browser I get the following error.
it's enough to download only Disc1 not Disc 2 and mini
vahric
- Original Message -
From: Xpression [EMAIL PROTECTED]
To: FreeBSD-questions [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 11:43 PM
Subject: Installation question...
Hi list...I've a very low bandwidth and I need to
Hi, I am reposting this in hopes poeple who have disklabel and RAID perc
3DCL / SCSI experience see it tonight.
Hi,
I had a crash tonight. Server rebooted and everything seemed to restart OK.
Interesting disklabel output though. Should I be worried about all the *s?
:
If this helps, the disk
I think you have file permisson problem please check error log for more
detail you will see the problem %100
vahric
- Original Message -
From: Payne [EMAIL PROTECTED]
To: freebsd-questions [EMAIL PROTECTED]
Sent: Tuesday, December 09, 2003 11:51 PM
Subject: Apache
Hi,
Thanks, yes
On stardate Tue, 9 Dec 2003, the wise Peter Ulrich Kruppa entered:
On Tue, 9 Dec 2003, Marco Beishuizen wrote:
Hello,
I own a HP LaserJet 2100, connected to my home network. According to the
specifications it should be able to print 10 pages per minute. When using
Windows that's not
Hi list...I've a very low bandwidth and I need to download
any of 5-RELEASES, do I need to download disc1 or mini-disc,
I only need a fully functional OS with networking not
packages, thanks...
Well, it is probably all about the same really.
The MNI_ISO is just the install system and it
Thanks, yes FreeBSD rocks!!! I know this is the right place to ask, so
if you have the apache group list that would be nice, but what do I have
to do to get my users account to work? Are they place for example
/home/user_x/public_html
On any web browser I get the following error.
Now I had to move it to a new computer in which the bios detects a
certian geometry, but then the system wont boot. No matter what I do
I had the same problem back in 4.5. I worked around the problem by
formating the hard drive with a Win98(Oh Boy) recovery floppy then
...
In the last episode (Dec 09), [EMAIL PROTECTED] said:
I dumped a disk image of my root partition like this:
dd if=/dev/da0s1a | gzip -9 -c where.ever.gz
Does this include the boot sector? In other words, if I need to
restore this disk image I can do the reverse and the boot sector and
Hi,
I'm currently using vinum to concatenate two large (120GB) disks,
providing a single large(r) valume (240GB in theory ;).
At the moment the volume is about 90% full and I'm looking to add
three more 120GB disks and set up RAID5. This is somewhat offtopic (not
entirely sure if it is
Hi. I am a Master Professor at FATEC (Brazil) which is the largest
Technology Faculty at Sao Paulo state, similar to your MIT. I am a
beginner at FreeBSD world, and Im studying it there are a few months.
As a member of a large faculty, and concerned about the kind of
software we
Hi, I'm running a freebsd 4.8 data server on an intranet.
There is many group (10 and more will come) and a lot of members (10-12 by group) into
them... So i'm having big trouble with the fact that 'pw' doesn't read further than
1024 characters into the '/etc/group' file.
Is there a way to
hello all,
just wondering if any of you has had luck getting the talkfilters port
integrated with gaim? i tried applying the patches included with the
talkfilters port, but no dice. i suspect that this failure has much to do
with the difference between the version of gaim for which the patches
Thanks, Dan. I'm thinking this whole process over based on what you've
said. I've never tried storing a disk as an archive, so I thought I'd
try it on for size.
Thanks for your point of view. Very helpful.
Alex
On Tuesday, December 9, 2003, at 05:26 PM, Dan Nelson wrote:
In the last episode
1 - 100 of 120 matches
Mail list logo
