I am using the YAB desklet from adesklets and have configured it to use my
choice of icons and apps by editing config.txt. However, yab seems to be
loading up from some other file or is not scanning the config file while
load. When i right click and choose configure it brings up the
Jason Morgan wrote:
Try mounting the device as SCSI cd device. I have to do the same with
a Pioneer DVD-ROM (a DVD-118, I believe). You'll need (at least)
device scbus
device cd
Surely you need
device atapicam
to make that work. In fact, if the OP is
jdow wrote:
From: Robert Gabaree [EMAIL PROTECTED]
I tried to update my new server to the new time zone by running
'tzsetup' and selecting Eastern. However, instead of showing 11:45,
it shows 6:45 - 5 hours later. I even tried to do a 'cp /usr/share/
zoneinfo/EST5EDT /etc/localtime but
Recommend you get a [bigger|second] disk if you can though,
or housecleaning will be a constant chore.
I got it more or less working, although not completely set up, and
then that 10GB disk died: click -- kerthunk -- click -- kerthunk
continuously, even after cycling power, even with only the
I'm running on -CURRENT and facing some library problems I guess. I have
GNOME, KDE and Enlightenment DR17 installed on the same box. If I run
gnome and start evolution for example or epiphany, it runs smoothly with
no issues what so ever. However, if I'm logged in into KDE or
Enlightenment and
Graham North wrote:
I just tried to ssh into freebsd server using Putty (pocketputty
actually).
I got a connection (sort of) but my Putty device put up the question
...unknown certificate.do you want to trust it... or words to
that effect. Due to finger problems on the touchscreen I
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Scot Hetzel
Sent: Tuesday, August 22, 2006 4:35 PM
To: Vizion
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Subject: Re: kde3 Make Install failure
On 8/22/06, Vizion
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
My home network is connected by my Linksys Broadband Router model RT31P2 to an
upstream Cable company supplied Motorola SB5100 cable modem.
A single IP address is allocated via DHCP to the Linksys to which my private
network is attached. The IP address is rarely changed.
I need to monitor and
On Wednesday 23 August 2006 12:37 am, E. Gad wrote:
Hello
First I was directed to post the here because I posted to the stable
mailing list before re-reading what it's purpose is- I apologise-.
I am playing with freebsd 6 on a testing box. I Upgraded l from 6.0 to
6.1 because it looked
On Tuesday 22 August 2006 11:26 pm, Lilo Stich wrote:
Hi
I was wondering if there is something like Scan2PDF for FreeBSD? If not,
how is the way to do it?
Thanks.
Michael
___
freebsd-questions@freebsd.org mailing list
Hello,
I am looking for the best possible solution in order to setup a High
availability mail cluster using FreeBSD (smtp/imap/pop server with
1000 accounts).
Selected software are as followed :
---
- Postfix
- Amavisd-new
- SpamAssassin
- Courier Imap
-
Chris Maness skrev:
Funny thing about Freebsd is that you can run linux-executables.
If you install www/linux-firefox you can use linuxplugins like flash
and it just works.
At least one less complication.
P.S. It also runs much faster. I find that very odd. Why would a non
native ap. run
Vizion írta:
My home network is connected by my Linksys Broadband Router model RT31P2 to an
upstream Cable company supplied Motorola SB5100 cable modem.
A single IP address is allocated via DHCP to the Linksys to which my private
network is attached. The IP address is rarely changed.
I need
Vizion wrote:
My home network is connected by my Linksys Broadband Router model
RT31P2 to an upstream Cable company supplied Motorola SB5100 cable
modem.
A single IP address is allocated via DHCP to the Linksys to which my
private network is attached. The IP address is rarely changed.
I
Perry Hutchison wrote:
Recommend you get a [bigger|second] disk if you can though,
or housecleaning will be a constant chore.
I got it more or less working, although not completely set up, and
then that 10GB disk died: click -- kerthunk -- click -- kerthunk
continuously, even after cycling
Hi,
This ought to be a fairly simple question, but I've googled and can't really
find the answer.
I'ld like to have the reports from the system cron jobs (daily run output,
security run output, weekly run output and monthly run output) sent to an
e-mail address other than root, but I want
Hi,
I am looking for a good howto or a detailed explanation in order to
deploy Linux HA on two BSD boxes.
You can grab heartbeat from the FreeBSD ports at sysutils/heartbeat
(i.e. http://www.freebsd.org/cgi/url.cgi?ports/sysutils/heartbeat/pkg-descr)
But unfortunately, it is only at version
On Wed, 23 Aug 2006 10:05:14 -0400
Lisa Casey [EMAIL PROTECTED] wrote:
30 5 1 * * rootperiodic monthly 21
| sendmail [EMAIL PROTECTED]
#
but all I get is a blank email sent to [EMAIL PROTECTED]
does it work if you use the command mail instead ? see : man
Lisa Casey wrote:
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily 21 |
sendmail [EMAIL PROTECTED]
15 4 * * 6 rootperiodic weekly 21 |
sendmail [EMAIL PROTECTED]
30 5 1 * *
In the last episode (Aug 23), Lisa Casey said:
This ought to be a fairly simple question, but I've googled and can't
really find the answer.
I'ld like to have the reports from the system cron jobs (daily run
output, security run output, weekly run output and monthly run
output) sent to an
In response to Lisa Casey [EMAIL PROTECTED]:
to this:
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily 21 |
sendmail [EMAIL PROTECTED]
This is a bad idea, mainly because (as you already know) it doesn't work :)
If you want to use
I have seen this happen where the kernel is not copied by sysinstall. I
booted the install CD but exited sysinstall to a shell prompt, mounted the
root partitiion and manually copied the kernel. You might give that a try.
-Derek
At 01:48 AM 8/23/2006, Perry Hutchison wrote:
Hi Martin:
Thank you for your help. I wasn't sure whether it was Putty or FreeBSD
that did the blacklisting. I will take your suggestion and see what
happens.
Thanks!
Graham/
Martin Miedema wrote:
Graham North wrote:
I just tried to ssh into freebsd server using Putty (pocketputty
Hello,
Let me preface the email by saying I'm not overly familiar with geli, and
it may already have the ability to do what I'm about to describe.
The scenario: A FreeBSD based appliance at a customer premise. The
customer really can't be trusted not to disasemble the box, and gain
30 5 1 * * rootperiodic monthly 21
| sendmail [EMAIL PROTECTED]
but all I get is a blank email sent to [EMAIL PROTECTED]
[...]
also.. using 21 doesn't seem appropriate, afaik you would use
that in
crontab if you don't want to get emails via cron
You would
to this:
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily
21 | sendmail [EMAIL PROTECTED]
[...]
However, you might find it easier to just add the following line to
the
top of the crontab:
[EMAIL PROTECTED]
Which will cause all mail
In response to David King [EMAIL PROTECTED]:
to this:
# Perform daily/weekly/monthly maintenance.
1 3 * * * rootperiodic daily
21 | sendmail [EMAIL PROTECTED]
[...]
However, you might find it easier to just add the following line to
the
top
Hi,
Is there any known problem with installing on a machine whose
Ethernet is fwe0: Ethernet over Firewire ?
I am still trying to install on that IBM Z61t notebook.
I get it all to appear to work - boot into sysinstall, slicing
and partitioning, making install choices and setting up the network
Well, you're at least as far as having the disk sliced up in a
workable way, or the bootstrap wouldn't start at all. This jumps
out as not only being bad, but happening right before meltdown.
acpi: bad RSDP checksum (210)
I suspect it's a red herring, since I was getting that message at
Perry Hutchison wrote:
Well, you're at least as far as having the disk sliced up in a
workable way, or the bootstrap wouldn't start at all. This jumps
out as not only being bad, but happening right before meltdown.
acpi: bad RSDP checksum (210)
I suspect it's a red herring, since I was
--- Greg Barniskis [EMAIL PROTECTED] wrote:
Perry Hutchison wrote:
Well, you're at least as far as having the disk
sliced up in a
workable way, or the bootstrap wouldn't start at
all. This jumps
out as not only being bad, but happening right
before meltdown.
acpi: bad RSDP
Hi!
I tried to find some information about this issue via Google and it
seems that I'm not only one having this problem, but there was no
clear solution available.
So...
I try to use microphone for recording. The sound card (Conexant
AC-Link Audio) works otherwise correctly, but when trying to
Svein Halvor Halvorsen [EMAIL PROTECTED] wrote: Subhro wrote:
yourself. However remember to cvsup your ports tree before you start
using it to get the required software. Refer to the handbook for
understanding how ports work.
For most people portsnap would be a better way of updating one's
--- E. Gad [EMAIL PROTECTED] wrote:
Svein Halvor Halvorsen [EMAIL PROTECTED]
wrote: Subhro wrote:
yourself. However remember to cvsup your ports
tree before you start
using it to get the required software. Refer to
the handbook for
understanding how ports work.
For most people
Hello,
Sorry for adding to my post before anyone responds, but:
I went ahead and installed from CD and have tried to talk to
the net with the fully installed system up.
During boot it finds the fwe0: card and appears to be happy,
but nothing talks. When I do an 'ifconfig -a' I get:
fwe0:
DW [EMAIL PROTECTED] writes:
If part of a normal backup routine, we are regularly backing up
/var/db/pkg, how can we best use that backup in a scenario in which a
machine needs to be rebuilt from scratch, and we're trying to save
time going through and doing a portinstall on everything we can
yusof khalid [EMAIL PROTECTED] writes:
i got some problem when i want to install the FreeBSD 6.1 on my hard disk.
This error occour while i'm finish configuring the disk, the error state
that Cannot create new root file system , command return status 36
i have try to reconfigure the disk but
backyard [EMAIL PROTECTED] wrote:
--- E. Gad
wrote:
Svein Halvor Halvorsen
wrote: Subhro wrote:
yourself. However remember to cvsup your ports
tree before you start
using it to get the required software. Refer to
the handbook for
understanding how ports work.
For most
Hi There,
Is there anybody who installed asterisk on freebsd 4.11 release ?
I was not succesful. please guide me.
I updated the ports and I installed the lib using ports but when I try to
install zaptel it says cannot load it for release before than 5
I couldn't install the asterisk from ports
backyard [EMAIL PROTECTED] wrote:
--- E. Gad
wrote:
Svein Halvor Halvorsen
wrote: Subhro wrote:
yourself. However remember to cvsup your ports
tree before you start
using it to get the required software. Refer to
the handbook for
understanding how ports work.
For most
The idea: I'd like to use geli to encrypt *everything* on the disk. So
if someone (a competitor maybe) removes the disk from the machine, he
can't gain any data off of it easily. I know nothing is 100%, but why
make the process easy for him?
It seems like there is a more basic problem
Hi There,
Is there anybody who installed asterisk on freebsd
4.11 release ?
I was not succesful. please guide me.
I updated the ports and I installed the lib using
ports but when I try to install zaptel it says cannot
load it for release before than 5
I couldn't install the asterisk from ports
On Wednesday 23 August 2006 22:37, Matti J. Karki wrote:
Mixer vol is currently set to 55:55
Mixer pcm is currently set to 48:48
Mixer speaker is currently set to 0:0
Mixer line is currently set to 0:0
Mixer mic is currently set to 1:1
Mixer cd is currently
Hi Bob,
I've seen this happening to a Dell server, that used a SCSI raid. One
disk was with a faillure, and this would lock up the machine. This
faillure however was not logged, because tthe SCSI raid controller
wouldn't send the apropriate signal to FreeBSD, since they were not
compatible. It
Hello,
I am looking for the best possible solution in order to setup a High
availability mail cluster using FreeBSD (smtp/imap/pop server with
1000 accounts).
Selected software are as followed :
---
- Postfix
- Amavisd-new
- SpamAssassin
- Courier Imap
-
Greg 'groggy' Lehey wrote:
On Tuesday, 22 August 2006 at 23:45:19 -0400, Robert Gabaree wrote:
Hi,
I tried to update my new server to the new time zone by running
'tzsetup' and selecting Eastern. However, instead of showing 11:45,
it shows 6:45 - 5 hours later. I even tried to do a 'cp
After a CD boot, is there a reasonably simple way to have
sysinstall reinstall just the kernel -- or the package
containing it -- without starting completely over?
Yeah, see what Derek wrote. Never done that, myself, or even
heard of the kernel not getting installed.
What Derek wrote?
You pretty much followed what I had wrote before that when I had a similar
problem, I booted the install disk, but exited sysinstall to a shell
prompt. I then mounted the root partition, then manually copied over the
kernel from the install CD to the root partition.
That does copy over the
--- E. Gad [EMAIL PROTECTED] wrote:
backyard [EMAIL PROTECTED] wrote:
--- E. Gad
wrote:
Svein Halvor Halvorsen
wrote: Subhro wrote:
yourself. However remember to cvsup your ports
tree before you start
using it to get the required software. Refer to
the
Dear all:
I have successfull setup mailscanner+spamassassin and now I can deliver mail to
my domain by mailscanner filtered. Now I got so many spam? Email message which
scaned by mailscanner. How can I configure mailscanner to delete all those spam?
Richard Ben, CIO
--
This message has been
backyard [EMAIL PROTECTED] wrote:
--- E. Gad
wrote:
backyard wrote:
--- E. Gad
wrote:
Svein Halvor Halvorsen
wrote: Subhro wrote:
yourself. However remember to cvsup your ports
tree before you start
using it to get the required software. Refer to
the
Edit the MailScanner.conf file and set at least high scoring SPAM to bounce.
-Derek
At 07:57 PM 8/23/2006, rithy4u- CEO wrote:
Dear all:
I have successfull setup mailscanner+spamassassin and now I can deliver
mail to my domain by mailscanner filtered. Now I got so many spam? Email
hi Lowell,
sorry for the misinformation about the problem. Actually i'm using the
sysinstall option.After I finish make the partition for my hdd using the
fdisk option, and after selecting the package(i select all with the Xwindow)
and the ports and ready to install the error occour.
Is FreeBSD
Edit the MailScanner.conf file and set at least high scoring SPAM to bounce.
Please DONT BOUNCE.
There is never any usefull return address in SPAM, so bouncing will
not get back to any spammer, but it will rather annoy some innocent
person.
It is totally useless to bounce for virus or spam,
Hi all,
Someone know how to disable the [1]javascript:alert() function?
Because it's anoying when you enter a page and have a lots of SPAM
from that Sad .
Best Regards,
Carlos Silva, CSilva
Web: [2]http://www.csilva.org/
References
1. javascript:alert(
2.
At 07:57 PM 8/23/2006, rithy4u- CEO wrote:
Dear all:
I have successfull setup mailscanner+spamassassin and now I can
deliver mail to my domain by mailscanner filtered. Now I got so many
spam? Email message which scaned by mailscanner. How can I configure
mailscanner to delete all those
Not yet. I want both of them to start automaticly at boot time, how?
Richard Ben, CIO
- Original Message -
From: Jonathan Horne [EMAIL PROTECTED]
To: rithy4u- CEO [EMAIL PROTECTED]
Sent: Thursday, August 24, 2006 9:24 AM
Subject: Re: MailScanner
i think derek ragonas reply touches on
Hello all.
I have been using FreeBSD for several months now, and have been
configuring it as a multipurpose server. I've installed a web server,
database, and a handful of other utilities. I also have now been
attempting for some time to configure an e-mail service - with
Sendmail.
Although
On 8/24/06, Danny Pansters [EMAIL PROTECTED] wrote:
On Wednesday 23 August 2006 22:37, Matti J. Karki wrote:
Mixer vol is currently set to 55:55
Mixer pcm is currently set to 48:48
Mixer speaker is currently set to 0:0
Mixer line is currently set to 0:0
Mixer mic is currently set to 1:1
Hi all,
I have a FreeBSD 4.x box running an app that uses 30-50% of the
processor. Periodically (through cron) we run a perl app that processes log
files and inserts the entries to sql.
This perl + mysql combination is causing problems for our app and I'd like
to run them at a low
61 matches
Mail list logo
