Try here.
https://www.ibm.com/docs/en/zos/3.1.0?topic=consider-zos-upgrade-workflows
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Chalk, Shelia
Sent: Tuesday, February 27, 2024 7:09 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [EXT] z/osmf
Please Note: This email
Hello all, we are planning to apply maintenance to our z/OS 2.4 system because
we are moving to a z15.
DFSORT exploits the IBM Integrated Accelerator for Z Sort on z15.
This PTF,provides,support for the DFSORT exploitation for the
IBM Integrated Accelerator for Z Sort on z15. In order to enable
Hello, all. I don't know if any of you are doing disk replication to a DR site,
but we are, and we are trying to resolve a specific problem with CICS and VSAM
file.
CICS, in the case of LSR pools hold the data in the buffers until a buffer
shortage\wait type of condition occurs. When that
Thanks to all who have replied.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Ward, Mike S
Sent: Wednesday, September 22, 2021 2:06 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [EXT] Control-M
Please Note: This email is from an [EXTERNAL] sender. Do not click on links
Anyone on here ever used Control-M from BMC? Any comments on the
Installation/Maintenance/Performance ...ET AL? Any additional products that had
to be purchased because Control-M didn't have everything it needed to run
successfully?
==
This email, and any files
Thanks for all the replies. It's obvious that it can be done. I will continue
working with the different softwares until get it ti work.
Thanks again.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Mike Wawiorko
Sent: Thursday, July 29, 2021 10:12 AM
To:
this
message.
Does the same FTP server have access to both Z/os and OMVS datasets?
Maybe there is a different FTP address to get to OMVS files, which would
communicate with the ZFS filesystem?
Joe
On Thu, Jul 29, 2021 at 9:43 AM Ward, Mike S wrote:
> I did, I can access the z\OS datasets, but I ca
: Windows FTPS client
Please Note: This email is from an [EXTERNAL] sender. Do not click on links or
attachments unless you expect them from the sender and know the content is
safe. Please contact the Service Desk if you have any concerns regarding this
message.
On 7/29/2021 9:54 AM, Ward, Mike
>
>
> -Original Message-----
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of Ward, Mike S
> Sent: Thursday, July 29, 2021 9:55 AM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: Windows FTPS client
>
> Hello all, and good day. I
Hello all, and good day. I was wondering if there are any Windows FTPS (Not
SFTP) client recommendations. I'm looking for a client that can handles z/OS
datasets as well as OMVS files. Preferably free, but will look at paid for
clients also.
Thanks.
==
This email, and
I believe SFTP is part of SSH, so you would have to install that. It's free
from IBM. Then I believe Rocket Software has a freebee that allows you to use
SFTP in batch with MVS datasets.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Billy Ashton
Sent: Wednesday,
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Ward, Mike S
Sent: Tuesday, June 5, 2018 9:27 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Help with PSF printer.
That worked thanks Len.
-Original Message-
From: IBM Mainframe Discussion List On Behalf
That worked thanks Len.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Carmen Vitullo
Sent: Tuesday, June 05, 2018 9:23 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Help with PSF printer.
I think Len hit the nail on the head, IIRC, the GFxx fonts are fixed type
My mistake, it is FSS, I meant to say non-sna attached.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Carmen Vitullo
Sent: Tuesday, June 05, 2018 8:51 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Help with PSF printer.
You say it's not an FSS printer, so what
cast, try changing
that to GT15.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Ward, Mike S
Sent: Tuesday, June 5, 2018 8:42 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Help with PSF printer.
"-//IPPRTR70 EXEC PGM=APSPPIEP,REGION=6M,TIME=1440,PARM=(TCPIP)"
No, standard IBM fontlibs.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Carmen Vitullo
Sent: Tuesday, June 05, 2018 8:51 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Help with PSF printer.
You say it's not an FSS printer, so what drives the printer? VPS, CASPOOL
"-//IPPRTR70 EXEC PGM=APSPPIEP,REGION=6M,TIME=1440,PARM=(TCPIP)"
All we have a proc that uses the above PSF program and the printdev statements
below. I have been looking through all the PSF documentation searching for how
to print lower case on that printer. We have lowercase printout that
.
Jim
On Wed, Apr 4, 2018 at 11:11 AM, Ward, Mike S <mw...@ssfcu.org> wrote:
> No not a remote z/OS, but a distributed system. I.E. Intel and such.
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of R.S.
>
systems
W dniu 2018-04-03 o 19:44, Ward, Mike S pisze:
> Hello all, does anyone know of any software that allows access to VSAM, SEQ,
> CICS files from remote systems. I.E. distributed systems. How is the access
> done? Web service calls? MQ calls?
Remote z/OS ? ;-)))
Two free (built in
Hello all, does anyone know of any software that allows access to VSAM, SEQ,
CICS files from remote systems. I.E. distributed systems. How is the access
done? Web service calls? MQ calls?
Thanks.
==
This email, and any files transmitted with it, is confidential and
What also comes to mind, if you have 3rd party software make sure to contact
them about the new CPU. Even if it's a 1 to 1 swap they may want to charge an
upgrade fee. You also have a new CPU serial number so make sure any 3rd party
software that requires a specific cpu serial number is
Innovation has a product called FDRPAS that can be rented that does the copies
while the system is up and running. We have used it several times and it works
great.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jesse 1 Robinson
Make sure you have the correct simultaneous connections configured correctly,
unless you have the unlimited license. They can get you real easy in an audit.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Sasso, Leonard
Sent:
Try clearing the resolver cache.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Bill Bishop (TMNA)
Sent: Tuesday, October 24, 2017 11:31 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IPMAILERADDRESS issue
I have changed the
Question, does the logic error produce any kind of message so that you can be
warned of the potential problem?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jousma, David
Sent: Monday, October 02, 2017 8:03 AM
To:
You can run a GSKSRVR SSL trace. There was a discussion on this list earlier
about it. And you can go here:
http://www-01.ibm.com/support/docview.wss?uid=swg21394697
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Elardus
What about syslog, I have the syslog daemon running and collecting FTP info.
Here is a sample.
There are some secure and some not secure connections. IP addresses and Userid
changed to protect the innocent. There is also more detailed info in the
debug.log file.
Jun 1 13:50:26 JESH01
http://www-03.ibm.com/systems/z/os/zos/features/wlm/WLM_Further_Info_Tools.html#SMF113
Watch the wrap.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of K
Sent: Monday, May 22, 2017 12:46 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject:
Do you have a link to the Share presentation?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Charles Mills
Sent: Monday, May 15, 2017 10:35 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Ransomware on Mainframe application ?
No, but
I did a google on IBM mainframe migration and here are two opposing viewpoints.
https://www.forbes.com/sites/jasonbloomberg/2015/08/14/mainframe-migration-fools-errand/#6fd702984cd3
http://modernsystems.com/10-commandments-of-successful-mainframe-migration/
-Original Message-
From:
California Edison Company
Electric Dragon Team Paddler
SHARE MVS Program Co-Manager
323-715-0595 Mobile
626-543-6132 Office ⇐=== NEW
robin...@sce.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Thursday, March 02
Ok, problem solved. Second level came back and said to add the mount attribute
to the sys1.uads user profile. We did, and problem solved.
Thanks to all who replied.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent
Same system name here.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Robert Harrison
Sent: Thursday, March 02, 2017 9:54 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMS Routines help
Hello,
I thought of a couple other items that
Ext data stream: Yes Max screen size: 132x27
Language:ENGLISH Terminal Type: 3278
Then check for what volumes are in the esoteric for the Default Unit.
Lizette
-Original Message-
>From: "Ward, Mike S" <mw...@ssfcu.org>
&g
Wed, 1 Mar 2017 15:01:02 +, Ward, Mike S <mw...@ssfcu.org> wrote:
>
>> We tried that. Same error. I'm going to research what the others have
>> recommended and see what we come up with. Thanks everyone for the reply's.
>>
>> Because doing a TSO/PDF submit
it
and will it allocate a new one?
Dana
On Wed, 1 Mar 2017 15:01:02 +, Ward, Mike S <mw...@ssfcu.org> wrote:
>We tried that. Same error. I'm going to research what the others have
>recommended and see what we come up with. Thanks everyone for the reply's.
>
>Because doing a TSO/
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Wednesday, March 01, 2017 7:01 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: SMS Routines help
We tried that. Same error. I'm going to research what the others have
recommended and see what we come up
:08 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMS Routines help
Mount a volume as public
Regards,
Doug
.
On Feb 28, 2017, at 17:52, Ward, Mike S <mw...@ssfcu.org> wrote:
Because doing a TSO/PDF submit we keep getting these errors, and we believe it
is an SMS probem.
,IKJ56221I DA
storage group(s) to use the volumes
available to the system. Your storage groups still have the other systems
volumes defined. So your system is attempting to define stuff on those
volumes, which don't exist on your sandbox system.
Matthew
On Tue, 28 Feb 2017 22:52:43 +, Ward, Mike S <
in situations like this, use the
TSO SUBMIT command, it won't try to allocate an SPFTEMPx. file.
TSO SUB DATASET.NAME(MEMBER)
Dana
On Tue, 28 Feb 2017 22:52:43 +, Ward, Mike S <mw...@ssfcu.org> wrote:
>Because doing a TSO/PDF submit we keep getting these errors, and we believe it
&
?
Thanks
Lizette
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
> On Behalf Of Ward, Mike S
> Sent: Tuesday, February 28, 2017 1:46 PM
> To: IBM-MAIN@LISTSERV.UA.EDU
> Subject: SMS Routines help
>
> Hello all, we set up
Thank you for the reply.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Carmen Vitullo
Sent: Tuesday, February 28, 2017 2:58 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMS Routines help
the DFSMS storage Admin guide helps 'setting
Thanks for the reply
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tom Marchant
Sent: Tuesday, February 28, 2017 2:58 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SMS Routines help
On Tue, 28 Feb 2017 20:46:16 +, Ward, Mike S
Hello all, we set up a sandbox LPAR where we just basically copied all the
operating environment (z/OS 2.2) from prod system to the sandbox. What we want
to do is turn off or nullify the SMS routines for a short time. I have spent
all morning and part of the afternoon looking for a way to do
symbolic
link defined for that directory.
Mark Jacobs
> Ward, Mike S <mailto:mw...@ssfcu.org>
> February 27, 2017 at 2:45 PM
> Hello all, in the z/OS ZFS file system for OMVS there are many
> directories, such as:
>
>
> NAME SIZE TYPE MODIFIED ATTRIBUTES
> etc 12 F
Hello all, in the z/OS ZFS file system for OMVS there are many directories,
such as:
NAME SIZE TYPE
MODIFIEDATTRIBUTES
etc 12 File
Hello all, we have a z13s running z/os V1.13 soon to be V2.2 and I had a
question about debit card pin block encryption.
We have Crypto processors on the z13 as seen below. I was asked to look into
Debit card PIN block encryption, but I'm not sure about what I'm looking at. I
looked into the
35 MIP or 35 MSU?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Steve
Sent: Friday, December 09, 2016 9:56 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Why Can't You Buy z Mainframe Services from Amazon Cloud Services?
If you look
We were having problems also. We took an SSL trace and noticed that the IBM
server was requesting the GeoTrust certificate. This was strange since we
received service in September without any problems.
You might be missing the GeoTrust Global CA from your keyring:
ginal Message-
From: IBM TCP/IP List [mailto:ibmtc...@vm.marist.edu] On Behalf Of Ward, Mike S
Sent: Wednesday, November 16, 2016 2:19 PM
To: ibmtc...@vm.marist.edu
Subject: TCP/IP SSL trace help please xposted to IBMMAIN
Hello all, we are having a little FTPS problem. As you can see below we are
gett
Hello all, we are having a little FTPS problem. As you can see below we are
getting: EZA1735I Std Return Code = 10234, Error Code = 00017
We are using the smpe secure procedure. We did this last month and it worked
fine now we are getting the above error.
We are trying to get an SSL trace of the
: Thursday, October 27, 2016 11:40 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Xposted from TCP/IP list SSL Problems, please help
WAG, Does TCP/IP have read access to the private key in the PKDS?
CSFKEYS resource.
Mark Jacobs
> Ward, Mike S <mailto:mw...@ssfcu.org>
> October 27, 2016
Hello list I have a small problem that I was hoping I could get some help with.
System is z/OS V1.13 running on a Z13s W01 soon to be V2.2, but not yet and not
soon enough.
We are using system SSL/TLS not AT/TLS for FTP and TN3270. We have Crypto
express 5 cards
with a CEX5C coprocessor.
I
Master Key set is done through ICSF.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jesse 1 Robinson
Sent: Wednesday, October 19, 2016 10:42 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Implementing ICSF - FOTS1949 PRNG is not seeded
We always use non-blocking, it seems to perform better. We had the same issue's
here that you experienced. That's why we went the non-blocking way.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Cannaerts, Jan
Sent: Friday, October
I concur, my staff appreciates that these articles are out there.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Peter Hunkeler
Sent: Friday, October 14, 2016 8:18 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: AW: FW: IBM Education
I found this:
"We often see abend878’s when starting JES2. This occurs typically when the
above the line size is restricted via SMF exits or
Region on the jobcard. To avoid this situation REGION=0 should be coded.
Changes in definitions could cause
storage increases and if the region is too
The = compares numerically while the == is a strict compare of equality or
inequality of the two strings.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Dyck, Lionel B. (TRA)
Sent: Friday, September 30, 2016 12:30 PM
To:
I also started in 1976. Time sure seems to have flown by. I started with 2
360/40's with 128K each. I never imagined I would see the day when you could
address Terabytes of memory. :)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of
Lizette, I found the pdfindex.htm file and I don't see a pdfindex.idx one. I'm
looking in the SK4T-4949-11 root. Is the idx file elsewhere?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Lizette Koehler
Sent: Wednesday, September
Hello all, I have been trying to find a z/OS knowledge Center for z/OS V2R2
that will install on windows. So far I have found one that installs on z/OS
using SMP. Is there one for windows and if so can I download it for
installation?
Any help appreciated.
Thanks.
==
Hello all, I have been trying to get to redbooks. Is this service down?
http://www.redbooks.ibm.com/
==
This email, and any files transmitted with it, is confidential and intended
solely for the use of the individual or entity to which it is addressed. If you
have
: CERTAUTH vs SITE vs user certificate
Actually with RDATALIB, you should be able to share a cert with multiple
regions as well without using SITE.
Rob Schramm
On Wed, Jul 27, 2016, 12:01 PM Ward, Mike S <mw...@ssfcu.org> wrote:
> I know that a site certificate can b e shared by many CIC
I know that a site certificate can b e shared by many CICS regions with
different controlling userids. A user certificate requires that each region
that is sharing the cert have the same userid. Hope that helps.
-Original Message-
From: IBM Mainframe Discussion List
Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Thursday, July 21, 2016 3:06 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IBM Z/os Explorer and CICS Explorer
I wonder if someone from IBM that's monitoring this list can help.
I thought if you had a licensed copy
I wonder if someone from IBM that's monitoring this list can help.
I thought if you had a licensed copy of z/OS and CICS you could use the z/OS
explorer and the CICS explorer. After using the installation manager to install
the products it seems to indicate that you have a trial period and then
Hello all, we will be migrating from V1.13 of z/OS to V2.2 in the next couple
of months. Is anyone aware of any gotchas that we need to look out for?
Thanks in advance.
==
This email, and any files transmitted with it, is confidential and intended
solely for the use of
Wasn't the MM the bon number?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Edward Gould
Sent: Wednesday, May 18, 2016 11:20 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: What was a 3314? (was: Whither VIO)
> On May 18, 2016, at
Larger number in fewer bytes.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Wednesday, May 04, 2016 1:17 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: ADR309E Message during Restore
On Wed, May 4, 2016 at 1:01 PM,
How would one do that? Are there instructions in the manual?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Mike Schwab
Sent: Friday, April 29, 2016 9:04 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: How to copy one pack IPL'able
-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Tuesday, April 19, 2016 1:19 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (External):Re: IBMSERV website
Sorry, the word below is PMR no PBM.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
f
Dovetailed Technologies
http://dovetail.com
On Wed, Apr 27, 2016 at 5:20 PM, Ward, Mike S <mw...@ssfcu.org> wrote:
> Does not seem to be assembler friendly, or am I missing something?
>
> -Original Message-
> From: IBM Mainframe Discussion List [mailto:IBM-MAIN@L
.
Check out the gsk_* apis in:
z/OS Cryptographic Services System SSL Programming
SC14-7495-00
Kirk Wolf
Dovetailed Technologies
http://dovetail.com
On Wed, Apr 27, 2016 at 9:38 AM, Ward, Mike S <mw...@ssfcu.org> wrote:
> Hello all, for all of you that are ICSF experts. I have bee
A lot to mull over. Thanks for the replies.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jim Mulder
Sent: Wednesday, April 27, 2016 3:30 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: How to copy one pack IPL'able z/OS to DVD.
> >
Ok, don't laugh. This may be commonplace to some of you, but I'm having a
dickens of a time. We created a 1 Pack IPL able system from the CBTTAPE JCL .
Work's great. Now I want to put the pack on a DVD so I can IPL it from the DVD
on the z12. How can I do this? I have been trying different
Cryptographic Services System SSL Programming
SC14-7495-00
Kirk Wolf
Dovetailed Technologies
http://dovetail.com
On Wed, Apr 27, 2016 at 9:38 AM, Ward, Mike S <mw...@ssfcu.org> wrote:
> Hello all, for all of you that are ICSF experts. I have been looking
> through the ICSF manual
Hello all, for all of you that are ICSF experts. I have been looking through
the ICSF manuals for an API that would extract the public key from an SSL key
that is in an RACF key ring.
I have not been able to locate such an API in ICSF. Is there such a beast?
==
This
Hello, all usually we open PBM's and Service requests online using SR or
IBMLINK, however sometime we have to call IBMSERV because we hac as DS8800 or
TS7700 issue. It sure is a lot easier using the online. Is there by chance a
website we can go to a an IBMSERV request?
Thanks in advance.
Sorry, the word below is PMR no PBM.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Tuesday, April 19, 2016 3:18 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IBMSERV website
Hello, all usually we open PBM's
ROFLMAO. :0 What goes around.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Thursday, December 17, 2015 8:24 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: [giggling] Does anybody use z390, other than as a hobbist?
Why
Here we go again. Watch the wrap.
http://www.scmagazine.com/cryptopeak-solutions-has-sued-nearly-70-high-profile-companies-over-encryption/article/457367/?DCMP=EMC-SCUS_Newswire=13130809=MTkzNjI0NTQzNjQ0S0=680218582=NjgwMjE4NTgyS0
==
This email, and any files
Yea, you still have to feed the punch. :)
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Kirk Wolf
Sent: Tuesday, December 01, 2015 5:44 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: What's a "ton" of JCL? [was:RE: Straightforward way
I had the same problem
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Tim Brown
Sent: Thursday, July 30, 2015 12:25 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: tcpip.tcpip.data and NSINTERADDR
Thanks, I was subscribed but when I
Thanks John.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of John McKown
Sent: Wednesday, June 24, 2015 2:08 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: blog on converting to z/OS 2.1
May be of interest to some one.
Hello all, I have a question. If you have a VSAM ksds with records that are
going to be larger than 32K, what is the best way to handle the records? Since
I believe 32k is the max how would you handle a logical record 32K? Multiple
32k physical records?
==
This email,
and
others may inspect, review, monitor, analyze, copy, record and retain any
communications sent from or received at this email address.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Wednesday, June 17, 2015 3:23 PM
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Paul Gilmartin
Sent: Friday, May 22, 2015 10:45 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: (OT) Re: Question on 3270 Devices
On Fri, 22 May 2015 09:56:13 -0500, John McKown wrote:
My
Same here, and no problems at all.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Jousma, David
Sent: Wednesday, May 20, 2015 11:25 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: z/OS Platform Software Products on ... Tape?
We've been
what the primary allocation was at the
time the dataset was allocated?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU]
On Behalf Of Ward, Mike S
Sent: Friday, May 22, 2015 2:11 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: SMS primary vsam space
Hello all, I know this is late on Friday before a three day weekend, however,
I'm stumped by a problem. We have some vsam files that have a primary
allocation of 398 cyls and a secondary of 398 cyls. The primary extent that is
displayed with in a listcat says that it is 11940 wihich is double
Has, anyone had time to apply the Poodle vulnerability fixes to z/OS and CICS?
We are getting ready to apply them and just wondered if anyone had any problems.
==
This email, and any files transmitted with it, is confidential and intended
solely for the use of the
-Original Message-
From: Ward, Mike S
Sent: Monday, October 27, 2014 4:55 PM
To: cic...@listserv.uga.edu
Subject: CICS Web Services and Digital Signatures
Hello all, I was wondering of anyone out here in CICS land is using webservices
and digital signatures using the following algorithms
Hello all, I have found two assembler programs that are supposed to convert
data to base64. They do not seem to be working correctly. I have gone to two
sites on the internet that do online base64 conversions. I place a 32 byte
string of data into the input area and press the encode button. The
Hello all, I am trying to learn more about crypto, so I am reading the manual
on generating certificates and public/private key pairs. The manual says that
if I specify ICSF in the RACDCERT GENCERT command the key pair is generated
using software and the resulting private key is stored in the
Thanks, I'll look into it.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Gerhard Postpischil
Sent: Saturday, May 10, 2014 9:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Loadlib compare utility
On 5/9/2014 12:47 PM, Lucas Rosalen
Hello everyone, do any of you know of a utility that can compare 2 loadlibs
with supposedly the same members and report if there is a discrepancy in the
modules, I.E. size of module, date of linking, that type of thing?
Thanks
==
This email, and any files transmitted
We use Host Explorer as ICC Consoles. Works great.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of R.S.
Sent: Friday, April 04, 2014 2:46 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: 3270 Emulators and consoles
The question is what
You can write a batch program either assembler or cobol that can talk to MQ. We
have several here that do it. All you have to do is provide the correct copy
libraries for compile/assemble and the correct bin libraries for linking.
-Original Message-
From: IBM Mainframe Discussion List
Hello all, How can you get tso telnet to use a specific IP address as it's
source IP address rather than the default outbound IP address?
Thanks in advance.
==
This email, and any files transmitted with it, is confidential and intended
solely for the use of the
Never mind, I set it up in the tcpprof. I used source ip with jobname and
specified the userid of the TSO session. It worked like a champ.
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Ward, Mike S
Sent: Thursday, March 20, 2014 3
1 - 100 of 127 matches
Mail list logo
